9/24/13
iMovie '11: Import video
iMovie '11: Import video
Languages
English
To create movies in iMovie, you must first import (transfer) your video footage from your camera to your
computer. You can import from most types of camcorders, including:
Digital camcorders that record to DVD, hard disk drive, or flash memory. These cameras connect to your
computer using a USB cable.
Digital still cameras that record video. These cameras use flash memory, often stored on Secure Digital (SD) or
CompactFlash (CF) cards. They connect to your computer using a USB cable.
Camcorders that record to tape. These cameras connect to your computer using a FireWire cable.
This task describes how to import from digital camcorders and camcorders that record to tape.
When you import video, iMovie stores it as an Event in the Event Library. This is the footage you use to create
movie projects in iMovie.
Import video from a camcorder that records to DVD, hard disk drive, or flash memory
1. Locate the cable that came with your camera, or any other similar USB cable.
The cable should have at least one connector that plugs into your Mac and looks like the connector on the
left (A, below). The other end of the USB cable, which plugs into your recording device, might look different
(as shown in B, below). For more information about cable connectors, go to this topic: About video cable
connectors.
2. Connect the camera to your computer with the cable.
3. Turn on your camera and set it to PC Connect mode (this mode may have a different name on your camera).
4. The first time you import from a device that records high‑definition (HD) video, an HD Import Setting dialog
appears. Even if you aren’t importing high‑definition video now, select Large or Full, and then click OK.
5. If the Import window doesn’t open, choose File > “Import from Camera.”
The Import window displays all the video clips on the device. You can use the playback controls below the
viewer to play the clips.
6. Select which video clips to import:
To import all clips, set the Automatic/Manual switch to Automatic, and then click Import All.
To import specific clips, set the Automatic/Manual switch to Manual. Deselect the clips you don’t want to
import, and then click Import Checked.
7. Choose the disk where you want to store the video from the Save To pop‑up menu.
Typically, you’ll store the video on your computer hard disk, but if you have another hard disk connected to
your computer, you can store the video there.
8. Choose how you want to organize the imported video in your Event Library:
To add the imported video to an existing Event (video you’ve already imported), select “Add to Existing
Event,” and then choose the Event’s name from the pop‑up menu. The first time you import video, there
won’t be any existing Events in your Event Library.
support.apple.com/kb/PH2114
1/4
9/24/13
iMovie '11: Import video
To create a new Event, type a name for it (for example, “Birthday Party”) in the “Create new Event” field. If
the video you’re importing was recorded on several different days and you want iMovie to create a new
Event for each of those days, select “Split days into new Events.”
9. To have iMovie smooth the shaky portions of your video (a process called stabilization), or to have iMovie
analyze your video for the presence of people, select “After import analyze for,” and then choose an option
from the pop‑up menu.
Stabilization reduces the camera motion in your video so that shaky parts can be played back more smoothly.
Analyzing video for the presence of people marks the footage that contains people. You can easily search for
this video later when you’re creating a project for which you need footage of people.
The processes of stabilization and analyzing video for the presence of people can take a long time.
10. If you’re importing HD video, choose a size from the “Optimize video” pop‑up menu.
If you’re not sure whether the video you’re importing is HD video, check the camera’s user manual for
information about how to set the camera to record HD or standard‑definition (SD) video.
The option you choose overrides what you selected in step 4 in the HD Import Setting dialog (which you see
only the first time you import video).
11. Click OK.
It can take several minutes to more than an hour for iMovie to import the video, depending on how much
video you have.
Import video from a tape‑based camcorder
1. Locate the cable that came with your camera, or any other similar FireWire cable.
The cable should have a 6‑pin connector that plugs into your Mac (A, below) on one end and a 4‑pin
connector that plugs into your camcorder (B, below) on the other end. You might have a FireWire 800 cable,
with a different end that plugs into your camcorder. For more information about cable connectors, go to this
topic: About video cable connectors.
2. Turn on the camcorder and set it to VTR or VCR mode (this mode may have a different name on your camera).
3. Connect the camera to your computer with the cable.
4. The first time you import from a camcorder that can record high‑definition (HD) video, an HD Import Setting
dialog appears; even if you aren’t importing HD video now, select Large or Full, and then click OK.
5. If the Import window doesn’t open, choose File > “Import from Camera.”
6. Set the Automatic/Manual switch:
Automatic:
Automatically rewinds the tape, imports all of the video on the tape, and rewinds the tape again. If you
use this option, click OK.
Manual:
Lets you rewind and fast‑forward the tape so that you can import only the footage you want. Use the
controls to set your tape to the point where you want to begin importing.
7. Click Import.
8. Choose the disk where you want to store the video from the Save To pop‑up menu.
Typically, you’ll store the video on your computer hard disk, but if you have another hard disk connected to
your computer, you can store the video there.
support.apple.com/kb/PH2114
2/4
9/24/13
iMovie '11: Import video
9. Choose how you want to organize the imported video in your Event Library.
To add the imported video to an existing Event (video you’ve already imported), select “Add to Existing
Event,” and then choose the Event’s name from the pop‑up menu. The first time you import video, there
won’t be any existing Events in your Event Library.
To create a new Event, type a name for it (for example, “Birthday Party”) in the “Create new Event” field. If
the video you’re importing was recorded on several different days and you want iMovie to create a new
Event for each of those days, select “Split days into new Events.”
10. To have iMovie smooth the shaky portions of your video (a process called stabilization), or to have iMovie
analyze your video for the presence of people, select “After import analyze for,” and then choose an option
from the pop‑up menu.
Stabilization reduces the camera motion in your video so that shaky parts can be played back more smoothly.
Analyzing video for the presence of people marks the footage that contains people. You can easily search for
this video later when you’re creating a project for which you need footage of people.
The processes of stabilization and analyzing video for the presence of people can take a long time.
11. If you’re importing HD video, choose a size from the “Optimize video” pop‑up menu.
If you’re not sure whether the video you’re importing is HD video, check the camera’s user manual for
information about how to set the camera to record HD or standard‑definition (SD) video.
The option you choose overrides what you selected in step 4 in the HD Import Setting dialog (which you see
only the first time you import video).
12. Click Import.
If you’re importing automatically, you can leave your computer and come back when the import is complete.
If you’re importing manually, click Stop (in the lower‑right corner of the Import window) when the section of
video you want has been imported. Then use the import controls to set your video to a point where you want
to begin importing again, and repeat steps 7 through 11. Continue in this manner until you have imported all
the video you want.
For more information about importing video into iMovie, click the Browse Help button above and see the topics in
“Import video into iMovie.”
Last Modified: Jul 23, 2012
Helpful?
Yes
48% of people found this helpful.
No
Related
iMovie ’11: Import Video
iMovie ’11: Organize Your Video ‑
Organize the Event Library
iMovie ’11 : Import Video
Learn how to organize your Events to make it easy
iMovie '11: Some camcorder video clips
may not be visible in the Camera Import
window
Update
to iMovie 9.0 .1 or later if you haven't
to browse and review your imported video .
already. You can verify which version is installed
by choosing About iMovie
Creating and saving a photo from video
clip in iMovie '11
Can I transfer my videos from iMovie to
Final Cut?
Importing Toast Files into iMovie '11
( in response to ajnealey ) You can import the
I've been working with imovie '11 and would like
I have always found the Toast Help files to be ab
clips from your iPhone into iMovie 11 .
to switch over to Final Cut Express or Final Cut
excellent source of information. In the Toast 10
Pro. Will I be able to export all my events and
Help, you should look for 'Converting DVD‑ Video
projects from imovie to Final Cut? And, if so, what
Content'. Depending on your DVD content, you
would be the best way to accomplish that?
will want to output as DV
Additional Product Support Information
support.apple.com/kb/PH2114
3/4
9/24/13
iMovie '11: Import video
iMovie '11
support.apple.com/kb/PH2114
4/4
Download PDF