L16885 1500rgb3d handbook

Owner Handbook
1500-RGB-3D
™
Owner Handbook
1500-RGB-3D
™
1
© Lanta Lighting™ 2006-2013. Terms Apply. All trademarks are the property of their respective owners. E&OE. All specifications and details are correct at time of print. Revision 1
Owner Handbook
Lanta Product Safety
• It is illegal and dangerous to shine a laser into audience areas, where the
audience or other personnel could get direct laser beams or bright reflections
into their eyes.
use & maintenance
You must read these warnings carefully because they include important
safety information about the installation, operation and maintenance of this
product. Follow all instructions to maintain Manufacturer Warranty and for your
own safety.
• It is illegal to shine any laser at aircraft.
• Never leave this device running unattended.
• Read all instructions in this User Manual and on the product carefully
BEFORE operating this device.
non interlocking housing warnings
• The latest version of this handbook can be found at www.lantalighting.com
• This unit contains hazardous voltages, moving parts and high power laser
emitters.
• All Lanta products can be used for indoor use. Under no circumstances must
these products be used outdoors unless stated otherwise.
• To prevent risk of fire or shock, do not expose products to rain or moisture.
• Do not open the laser housing to avoid potential exposure to unsafe levels of
laser radiation.
• Make sure there are no flammable materials close to the unit during
operation.
• The laser power levels, accessible if the unit is opened, can cause instant
blindness, skin burns, and fires.
• Clean the product with a clean and dry, non-abrasive cloth. Do not use
solvents or liquids to clean the product.
• There are no user replacement parts inside the product. Do not open the
product for any reason. This will invalidate your Manufacturer Warranty and
may impair the safety features of the product.
• Do not use if the product if you suspect it has been damaged in any way,
including being dropped, is malfunctioning, or has been exposed to liquids
or moisture. The unit must be repaired by an authorised service centre only.
Manufacturer Warranty is void if unit is opened or adapted in any way. Operator
safety may be compromised if this product is not operated and maintained
in accordance with the details contained in this Owner Handbook.
• This appliance must be earthed. Do not remove the earth connection in the
plug or any other location - it is essential for user safety.
• Power connection to the product is via a UK 240 Volt AC three-pin mains plug.
Do not remove or adapt this plug. If necessary, only replace the plug top fuse
with one of the same type, size and value.
• Be aware that products are mains powered and may be capable of
producing high voltages from its outputs and has mains voltages inside the
cabinet.
laser safety notes
YOU MUST READ THIS LASER SAFETY INFORMATION
Laser light is many thousands of times more concentrated than light from
any other kind of light source and as so it poses a real danger to the sight.
This concentration of light can cause instant eye injuries, primarily by burning
the light sensitive portion at the back of the eye called the retina. Even if you
cannot feel “heat” from a laser beam, it can still potentially injure or blind you or
your audience. Even very small amounts of laser light are potentially hazardous
even at long distances.
Laser eye injuries can happen quicker than you can blink.
• Entertainment products split the laser beam into hundreds of smaller laser
beams that are radiated out at high speed. There is a misconception that
an individual laser beam is safe for eye exposure. This is not the case. This
product produces high levels of laser power - classified as Class 3B - before it
splits into multiple beams - defined as Class 3R levels. Many of the individual
beams are potentially hazardous to the eyes and should never be directed
into an audience at any time.
• Do not assume that because the laser light is moving, it is safe. It isn’t, and
because these beams are being moved by a mechanical device, it is
possible for that device to stop moving and then direct the laser beam
constantly at an individual. Since eye injuries can occur instantly, it is critical
to prevent the possibility of any direct eye exposure.
mains warnings
• Always make sure that the mains voltage you intend to use is within the
operating range of the product.
• Always unplug product from the mains supply before moving, cleaning etc.
• It is illegal to aim a Class 3R laser into an area where people could be
exposed, even below people’s eye level.
• Make sure you replace the fuse with another of the same type and rating.
• This product will be irrevocably damaged and the warranty invalidated if
connected to a power pack or other dimmer.
• Always install a laser effect to ensure that the entire laser light radiation is at
least 3 meters above the floor on which people can stand. It is very important
to test the laser before any public use.
• Make sure the mains cable is not crushed or damaged.
• Never disconnect the mains lead by pulling or tugging on the cable.
• Do not use if any defect is detected such as if the product emits only one or
two laser beams rather than the expected quantities as this could indicate
damage to the product and could allow emission of higher laser levels
above Class 3R.
• This appliance must be earthed. Do not remove the earth connection in the
plug or any other location - it is essential for user safety.
• Unplug the product from the mains during lightning storms or periods of
mains fluctuations. If the product is going to be unused for long periods,
unplug from the mains.
• Do not point lasers at any reflective surfaces such as windows, mirrors
and metal truss or other reflective fixtures as even laser reflections can be
hazardous.
• The operation of a class 3R laser show is only allowed if the show is controlled
by a skilled and well-trained operator, familiar with the data included in this
manual.
physical warnings
• Always secure the product to a fastening device using a safety chain.
• If the product appears to be malfunctioning or operating in an unexpected
manner, stop using the unit immediately and contact your supplier.
• The law is updated from time to time and it is the users sole responsibility to
understand the legal obligations and responsibilities in force at the time and
location of use.
• Never lift, move or carry the product by any other means other than the case
as a whole or handle if provided.
We recommend visiting the Government Health & Safety website
http://www.hse.gov.uk or search for “Controlling the radiation safety of display
laser installations” for further information.
laser warnings
• Lasers are hazardous devices. Permanent eye injury and blindness is possible
if lasers are used incorrectly.
• Avoid direct eye contact with laser light.
• Never intentionally expose your eyes or others to direct laser light.
• This laser product can potentially cause instant eye injury or blindness if laser
light directly strikes the eyes.
2
© Lanta Lighting™ 2006-2013. Terms Apply. All trademarks are the property of their respective owners. E&OE. All specifications and details are correct at time of print. Revision 1
Owner Handbook
1500-RGB-3D
™
INTRODUCTION
Congratulations on your purchase of a Lanta Lighting Product. Based in the UK,
Lanta are committed to providing high quality products at cost-effective prices
to the professional lighting market. Since the first product was launched in
2006, Lanta has established a reputation for reliability, common sense design
and customer support that has become the envy of others.
Other Lanta Lighting range include:
130mm
Professional Lighting:
From washes to floods, spots to projectors, LED technology now outperforms
traditional lights while at the same time requiring significantly lower power and
generating far less unwanted heat.
Performance Lasers:
Recent advances have reduced the costs of Lasers, made them more portable
and brought improved performance and reliability. With step and animation
lasers in multi and single colour formats for mobile DJs and static installs, Lanta
promise Lasers that won’t burn a hole in your pocket.
Atmospheric Effects:
When you need special atmospherics effects, Lanta have everything from bubble
machines to fake snow, hazers and foggers. There’s also a range of fluids and
consumables specially designed to get the best from the range.
m
0m
23
200m
m
Control Gear:
Lightweight and portable, Lanta Control Gear is robust enough to survive life on
the road and smart enough to control DMX kit whatever the venue. Our website can be found at www.lantalighting.com and is available for the
benefit of customers worldwide. Please consult for information, advice and
support on this and other high quality products from Lanta
unpacking & inspection
It is important that you carefully examine the packaging to ensure the product
has not been damaged during shipping. If you are satisfied the packaging
appears undamaged, carefully unpack the product. Please keep all of the
packing materials in case you need to transport the device, pass it on to a new
owner in the future or return it for some reason. Please examine the product
and accessories to ensure they have arrived with you in good condition and
show no sign of damage. If you suspect the product may be damaged,
DO NOT USE IT. Please notify the sender immediately for advice –
not the manufacturer.
inside the box
• 1500-RGB-3D Laser™
• 1 x IEC Power Cable
• 1 x DMX Cable
• 2 x Safety Keys
• 1 x Interlock
safety information
All information regarding important safety information about the installation,
operation and maintenance of this product can be found at the back of this
handbook. Products from Lanta Lighting meet all required safety standards in
force at the time of manufacture and are fully compliant with them.
specifications
Stock Code
L16885
Laser Diode
300mW Red (635nm) 300mW Green (532nm)
1000mW Blue (450nm) Mixed 1500mW White
Laser Class
3b
Scanner
25k High Speed Optical
Defl. Angle
±30˚
Connections
3 Pin Male & Female XLR, ILDA IN & OUT Control
Key lock, Interlock
Run Modes
Sound Active, Auto Beam & Animation,
DMX512 13 channel, ILDA Control
Effects
Animation, Multi Pattern, 3D Twinkle & Animation
Dimensions
200 x 235 x 130mm
Weight
4.5kg
manufacturer warranty
• This Manufacturer Warranty is valid in the UK only.
• Lanta Lighting warrants that this product is free from workmanship defects
and material failure during normal use and operation for a period of 12
months from first use or from original date of sale (whichever is the earliest)
providing all of the terms indicated in the warranty section have been fully
complied with.
• Expressly excluded is our liability for any directly connected or indirectly
connected item or items or any consequential loss associated with the failure
of the product howsoever caused.
• If the product has been opened, modified, tampered with, incorrectly
connected, used inappropriately or in conflict with the instructions herein,
or the product model or serial number has been damaged, removed,
tampered with, obliterated or made partly unreadable by any person or
persons, the Manufacturer Warranty is irrevocably null and void.
• No extension, adaption, alteration or modification to the terms of this
Manufacturer Warranty will be permitted, unless expressly authorised in
writing (excluding email and fax) by a Director of Lanta Lighting. Warranty is
transferrable during the Warranty period.
3
© Lanta Lighting™ 2006-2013. Terms Apply. All trademarks are the property of their respective owners. E&OE. All specifications and details are correct at time of print. Revision 1
Owner Handbook
1500-RGB-3D
™
13 CHannel DMX
operating modes
All operating modes can be selected via the Dip Switches located on the rear
of the unit.
Channel
function
value
DESCRIPTION
0 - 63
Sound Active
CH1
MODE
64 - 127
Auto Mode
128 - 255
Manual Mode to Auto
ON
1
2
3
n = ON, 4
5
6
7
8
9
10
0 - 49
Normal Animation Effect
50 - 99
Multi-Pattern Effect
100 - 149
3D Spiro Effect
150 - 199
3D Effect
= OFF, X= either ON or OFF
auto mode
EFFECT
MODE
ch2
Use the “PATTERN SIZE” dial to vary the size of the Laser Pattern. Rotate the dial
anti-clockwise to reduce and clockwise to increase pattern size.
200 - 255
Normal Animation Effect
ch3
Dimmer /
COLOUR
0 - 255
Cosed - white - red - yellow
- green - blue - purple - fixed
colour - random single colour random seven colour - moving
seven colour - fixed colour
ch4
pattern select
0 - 255
128 Patterns
moving y
0 - 127
Manual to Up or Down moving
ch5
128 - 191
Auto to Up moving
ON
1
2
3
4
5
6
7
8
9
10
SOUND active mode
Use the “SENSITIVITY” dial to vary the sound sensitivity of the Laser Effect. Rotate
the dial anti-clockwise to reduce and clockwise to increase sensitivity.
ON
1
2
3
4
5
6
7
8
9
10
moving x
ch6
eFFECTS CHART (CH 5 - 8)
Dip Switch Status
FUNCTION
1
2
3
4
5
6
7
8
9
10
Dip switch numbers
-
-
-
-
X
X
X
X
-
-
MULTI - EFFECT
-
-
-
-
n
X
X
X
-
-
NORMAL ANIMATIONS
-
-
-
-
X
n
X
X
-
-
MULTI-PATTERN
-
-
-
-
X
X
n
X
-
-
3D SPIRO EFFECT
-
-
-
-
X
X
X
n
-
-
3D EFFECT
ch7
rolling x
ch8
rolling y
ch9
rotation
zoom (+/-)
192 - 255
Auto to Down moving
0 - 127
Manual to Left to Right moving
128 - 191
Auto to Right moving
192 - 255
Auto to Left moving
0 - 127
Manual Rolling
128 - 255
Auto Rolling
0 - 127
Manual Rolling
128 - 255
Auto Rolling
0 - 127
Manual Rotation
128 - 191
Auto Clockwise rotation
192 - 255
Auto Counter Clockwise rotation
0 - 85
Manual Zoom (+/-)
86 - 170
Auto Zoom (+)
171 - 255
Auto Zoom (-)
self protection
ch10
During long spells of operation on full power, the fixture will adjust the power
consumption to increase the dissipation of heat. Please ensure the fixture is well
ventilated when in use on full power for long spells.
ch11
Pattern size
0 - 255
0 = Moderate, 1 = Small,
255 = Large
DMX mode
ch12
display dot
0 - 255
0 = Display Dot,
255 = Best Brightness
Green LED indictator will flash with DMX signal input, LED will be static when no
input.
ch13
Drawing
0 - 127
Auto Drawing Mode 1
128 - 255
Auto Drawing Mode 2
For DMX mode, DMX address from #1 to 9# dipswitches must be set, the
address is set from 1 to 511. Each dipswitch represents a binary value.
ON
1
n = ON, 2
3
4
5
6
7
8
9
10
= OFF, X= either ON or OFF
1
2
3
4
5
6
7
8
9
10
Dip switch numbers
1
2
4
8
16
32
64
128
256
n
VALUE
4
© Lanta Lighting™ 2006-2013. Terms Apply. All trademarks are the property of their respective owners. E&OE. All specifications and details are correct at time of print. Revision 1
Owner Handbook
1500-RGB-3D
™
#9
Dmx Switch Set
=OFF
X=Not Use
n
#8
n=ON n
#7
n
#6
#1
#2
#3
#4
n
n
n
n
n
n
n
n
n
n
192
224
256
288
320
352
384
416
448
480
1
33
65
97
129
161
193
225
257
289
321
353
385
417
449
481
n
2
34
66
98
130
162
194
226
258
290
322
354
386
418
450
482
n
3
35
67
99
131
163
195
227
259
291
323
355
387
419
451
483
n
4
36
68
100
132
164
196
228
260
292
324
356
388
420
452
484
n
5
37
69
101
133
165
197
229
261
293
325
357
389
421
453
485
n
n
6
38
70
102
134
166
198
230
262
294
326
358
390
422
454
486
n
n
7
39
71
103
135
167
199
231
263
295
327
359
391
423
455
487
n
8
40
72
104
136
168
200
232
264
296
328
360
392
424
456
488
n
9
41
73
105
137
169
201
233
265
297
329
361
393
425
457
489
n
n
10
42
74
106
138
170
202
234
266
298
330
362
394
426
458
490
n
n
11
43
75
107
139
171
203
235
267
299
331
363
395
427
459
491
n
n
12
44
76
108
140
172
204
236
268
300
332
364
396
428
460
492
n
n
13
45
77
109
141
173
205
237
269
301
333
365
397
429
461
493
n
n
n
14
46
78
110
142
174
206
238
270
302
334
366
398
430
462
494
n
n
n
15
47
79
111
143
175
207
239
271
303
335
367
399
431
463
495
n
16
48
80
112
144
176
208
240
272
304
336
368
400
432
464
496
n
17
49
81
113
145
177
209
241
273
305
337
369
401
433
465
497
n
n
18
50
82
114
146
178
210
242
274
306
338
370
402
434
466
498
n
n
19
51
83
115
147
179
211
243
275
307
339
371
403
435
467
499
n
n
20
52
84
116
148
180
212
244
276
308
340
372
404
436
468
500
n
n
21
53
85
117
149
181
213
245
277
309
341
373
405
437
469
501
n
n
n
22
54
86
118
150
182
214
246
278
310
342
374
406
438
470
502
n
n
n
23
55
87
119
151
183
215
247
279
311
343
375
407
439
471
503
n
n
24
56
88
120
152
184
216
248
280
312
344
376
408
440
472
504
n
n
25
57
89
121
153
185
217
249
281
313
345
377
409
441
473
505
n
n
n
26
58
90
122
154
186
218
250
282
314
346
378
410
442
474
506
n
n
n
27
59
91
123
155
187
219
251
283
315
347
379
411
443
475
507
n
n
n
28
60
92
124
156
188
220
252
284
316
348
380
412
444
476
508
n
n
n
29
61
93
125
157
189
221
253
285
317
349
381
413
445
477
509
n
n
n
n
30
62
94
126
158
190
222
254
286
318
350
382
414
446
478
510
n
n
n
n
31
63
95
127
159
191
223
255
287
319
351
383
415
447
479
511
n
n
n
160
n
n
n
n
128
n
n
n
n
n
96
n
n
n
n
64
n
n
n
n
32
n
n
n
n
n
×
n
n
n
n
n
#5
n
n
n
n
n
5
© Lanta Lighting™ 2006-2013. Terms Apply. All trademarks are the property of their respective owners. E&OE. All specifications and details are correct at time of print. Revision 1
Lanta lighting is very focussed on saving the planet.
Our products are low energy and our packaging
is reduced to the minimum possible. We include
our handbooks and specification sheets as part of
our paper reduction programme. All our product
handbooks and spec sheets are available on-line.
In this way you always get the latest version,
available on any internet enabled device, at any
time of the day or night, anywhere on the planet!
www.lantalighting.com
© Lanta Lighting™ 2006-2013. Terms Apply. All trademarks are the property of their respective owners. E&OE. All specifications and details are correct at time of print. Revision 1
Download PDF