ADAPTTM Free

ADAPTTM Free
ADAPT Free
TM
Active communicative, supply air diffuser for the WISE system, ADAPT F
ADAPT Free
Quick facts
►►Supply air diffuser with an active damper
►►Pressure-dependent and cleanable
►►Integrated sensor module
►►Simple wiring, Plug & Play
►►Communication via Modbus RTU
►►Supplied complete with connection box, CONNECT
Adapt
►►Complemented with the WISE templates,
containing detailed descriptions for planning
►►Allows for control of:
– Heat alternatively, cooling valve
(max. 3 actuators per master)
– Slaves (supply or extract air, 3 pcs)
– Lighting (via relay)
Quick Selection
AIR FLOW – SOUND LEVEL – COOLING EFFECT
max q (l/s)
Size
min q*)
(l/s)
50 Pa / 30 dB(A)
50 Pa / 35 dB(A)
max p**)
(W)
160
0/5
50
85
480
200
0/10
65
100
625
*)
The first value indicates closed damper, the second value
indicates lowest adjustable air flow.
**)
Max. cooling effect is calculated at ∆t=8K and for an air
flow at 50 Pa and 30 dB(A).
1
WISE
Technical Description
Design
ADAPT is a series of flow-controlled supply air diffusers for
the Swegon WISE system:
• The air diffuser controls the airflow with an active slot
behind the frontplate.
• An ADAPT diffuser is always supplied with a
commissioning box.
• Inside the air diffuser, is a controller providing all the
required set points and control functions as well as a
multi-functional sensor module, see figure 1.
Functions in the Master diffuser
• Cools/heats and ventilates with air.
• Two stage cooling with water in the second stage, cannot
be combined with heating.
• Controls airflow with regard to temperature and presence.
• Ventilation boost after longer periods of unoccupancy.
• Provision for wiring to a CO2 controller.
• Provision for manually setting set points.
• Has provision for connection to a main control system
(Modbus).
• Emergency functions for closing / opening of the damper.
• Control of the heating in sequence unless 2-stage
cooling has been selected.
• Indication via LED. Indicates current operating mode and
warns of malfunctions in the diffuser.
• Comfort control indicated by the LED if the room temperature or CO2 value deviates too much from the set point,
not activated by default.
Planning – WISE Templates
See separate documentation, ”WISE Project manual”,
available for download from www.swegon.se.
In addition, Swegon sales personnel can supply WISE
templates containing descriptions with detailed information
regarding functionality, flowcharts, wiring diagrams and
demarcation list for various constructions.
1
Sensor module
2
A sensor module is integrated in all ADAPT supply air
diffusers, containing the following functions:
• A temperature sensor controls the airflow to maintain
required temperature in the room.
• A presence detector makes it possible to save additional
energy by lowering the airflow when there are no occupants in the room.
• The presence signal from the air diffuser can be fetched
for controlling the lighting, for instance, and in this way
save more energy.
3
Figure 1. The sensor module of ADAPT Free
with connection for TUNE Adapt.
1. Temperature detector
2. In-operation indicator, green, red and orange LED.
3. Presence detector
Connectivity
In each delivery of a master diffuser, a CONNECT Adapt connection box is included:
• The connection box replaces the coupling box which otherwise is mounted on a wall/ceiling for wiring a 24 V supply
voltage to the air diffuser and Modbus networks.
• Both air diffuser and connection box are equipped with
RJ45 quick-fit connectors for quick and fault-free wiring.
• The device has provision for connection to a main control
system (BMS/SCADA) via ModBus.
• Accessory cable, LINK Modbus (RJ12) can be connected
between air diffuser and connection box. The air diffuser
will then be ready for the main control system.
• From the connection box, control functions for heating in
sequence, CO2 sensor and set point adjuster, can also be
connected.
2
Swegon reserves the right to alter specifications.
Figure 2. Connection box, CONNECT Adapt.
20151013
www.swegon.com
WISE
Installation
A detailed installation instruction is enclosed with each
delivery and can also be downloaded from www.swegon.
1.Adapt Free is suspended from the ceiling. Female-threaded
grommets are available on the top of the air diffuser.
2.Secure the connecting duct by means of pop rivets.
3.The bottom plate can be dismantled by pressing the
fixing pins of the bottom plate outward, which will
loosen it from the upper cone. Secure the bottom plate
to the upper cone with the safety cord, press together
the S-hook to prevent it from coming loose.
N.B.! Disconnect the electric cable (C) from the motor.
• The commissioning box is made of galvanized sheet
steel with internal insulation.
Maintenance
• The ADAPT air terminals can be cleaned on the outside, if necessary, using lukewarm water with dishwashing detergent added.
• The duct system is accessible without need for tools.
(See the separate installation instruction)
Declaration
Declaration of Construction Materials is available for download from www.swegon.com.
Electrical data
ADAPT is supplied with power via the connection box.
B
For more information about various wiring and room solutions, see the Technical Section.
A
Supply voltage
24 V AC ±10 %
3 VA
Cable rating
0,6 A
Ambient temperature
0 °C - +50 °C
Forms of delivery
• Some of the ADAPT-products are available from stock
with standard settings.
• At delivery, a master air diffuser contains a complete air
diffuser with commissioning box, connection box CONNECT Adapt and 5 metre long RJ45 cable LINK Adapt.
• Delivery of a slave air diffuser contains a complete air diffuser with commissioning box and 5 metre long RJ45
C
Standard settings
Temperatures (°C)
Figure 3. Adapt Free, installation.
A*) M8 threaded rod and lock nuts.
B*) Securing to the ceiling or load-carrying structure.
*)
N.B.! Parts A and B are not included at delivery.
Commissioning
• Normally, the ADAPT air terminals are preset from the
factory based on design values.
• The TUNE Adapt hand-held terminal is used for manually checking the current air flow through the air diffuser, and for changing set points, if required.
• For more information, see the installation - Commissioning - Maintenance instruction as well as the TUNE
Adapt user manual.
Materials and finish
• ADAPT air terminals are made of galvanized sheet steel,
with parts made of plastic, rubber and also contain
electronic components.
• The ADAPT air terminals are powder coated in Swegon’s white interior standard colour RAL 9010, both on
the inside and on the outside.
• The sensor module and connection box are made of
ABS plastic.
Swegon reserves the right to alter specifications.
Presence
22
±1K
Absence
22
+3 / -2 K
Night-time cooling
18
Morning heat
25
Airflows (l/s)
Absence
Min.
airflow
Max.
airflow
The smallest size
0/5
10
60
The largest size
0/10
15
90
Air quality (ppm)
Min.
Max.
800
1000
CO2
Presence
Switch on delay
Switch out delay
0 sec.
20 min.
Communication Modbus RTU by RS-485
Modbus ID
Speed
1
38,400 bps
Bit length
8 bits
Stop bits
1 bit
Parity
20151013
None
www.swegon.com
3
ADAPT Free
Max. power consumption
WISE
Sizing
• The specified sound levels dB(A) are applicable to
rooms with an equivalent sound absorption area of
10 m2 (4 dB room attenuation).
• The throw L0.2 is measured under isothermal discharge
conditions.
• Recommended max. permitted temperature below
room temperature is 12 K.
• All technical data applies to 360° distribution pattern.
• For calculating the air stream propagation, air velocities
in the occupancy zone, or sound levels in rooms with
other dimensions, we refer to our ProAir Web calculation
program. ProAir Web is available at www.swegon.com.
Sound data
500
160
7
2
-3
1
-1
-6
-14
-17
200
8
2
-1
2
-1
-7
-18
-21
Tol. ±
2
2
2
2
2
2
2
2
15
100
06
50
40 dB(A)
300
1000 2000 4000 8000
03
250
01
125
pt Pa
0
500
400
Mid-frequency (Octave band) Hz
63
Air flow – Pressure drop – Sound level – Throw
• The diagrams should not be used for commissioning.
• The dB(C) value is normally 6-9 dB higher than the
dB(A) value.
• The throw can be read at the design max. air flow and
pressure drop.
• The slot opening of the diffuser is shown at 0, 1, 3, 6
and 15 mm.
• Sizing example – size 200:
– Given airflow 10-50 l/s at Pt 50 Pa.
– Max. sound level 30 dB(A)
– Max. throw at line 06 = 3.2 meters.
ADAPT F 160
Sound power level, Lw (dB)
Table, Kok
Size
Engineering graphs
35
200
30
100
25
20
50
40
30
20
Sound attenuation DL
Table DL
Size
10
5
Mid-frequency (Octave band) Hz
1000 2000 4000 8000
3
4
5
10
20
63
125
250
500
160
21
16
24
21
19
10
11
11
06
200
18
13
23
21
14
10
10
12
03
Tol. ±
2
2
2
2
2
2
2
2
30
20
40
30
50
40
100
200
300
200 l/s 300
400 500
m3/h
15
0,3
0,4 0,5
1
2
3
4
5
10
20
l0,2 m
06
01
pt Pa
0
500
400
03
ADAPT F 200
15
300
200
40 dB(A)
35
100
30
25
50
40
20
30
20
10
5
3
4
5
10
20
30
20
40
30
50
40
50
100
100
200
300
200 l/s 300
400 500
m3/h
15
06
03
0,3
4
Swegon reserves the right to alter specifications.
0,4 0,5
20151013
1
2
3
4
5
10
20
l0,2 m
www.swegon.com
WISE
Dimensions and weights
Ordering key
Size
ØA
ØD
B
C
E
Weight, kg
160
380
159
320
123
130
6,8
Circular active air diffuser for ceilings
200
456
199
390
159
150
10,2
Version:
Product
ADAPT F
d
-bbb
-c
Connection dimensions:
M: Master
S: Slave
N.B.! Specify absence, min./max. airflows in your specification!
Standard range: Size: 160, 200
Accessories
DETECT Quality Temperature and CO2sensor with set point
selector knob
Figure 4. ADAPT Free, dimension figure.
Hand-held terminal for reading/changing
settings
TUNE Temp
Temperature adjuster
LINK Modbus
RJ12-cable for connecting up Modbus RTU
LINK Adapt
RJ45 cable for connecting up in other lengths
SPLIT Link
Split connector
FIX Link
For securing cords to ducts, etc.
POWER Adapt
Transformer
ACTUATOR
Valve actuator, on/off
VALVE
Radiator valve
ADAPT Relay
Relay for light or heat control
ADAPT TR
Semi-conductor relay for lighting or heat
control
CABLE Ext
Extension cable between box and air diffuser
LINK Wa
Network cable for Modbus, complies with the
EIA-485 standard
Each accessory is described in more detail in a separate
product sheet available at www.swegon.se.
Varje tillbehör finns redovisat på separat katalogblad som
kan hämtas på www.swegon.se.
Swegon reserves the right to alter specifications.
20151013
www.swegon.com
5
ADAPT Free
40
TUNE Adapt
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement