USER MANUAL LL A3 BIG POINT 01 BRACKET

Leader Light s.r.o.
M.Gorkeho 33
SK-052 01 Spisska Nova Ves
Slovakia
www.leaderlight.eu
USER MANUAL
LL A3 BIG POINT 01 BRACKET
LL33 520 LL33 530
COMPLIMENTS ON YOUR PURCHASE!
01
Safety Information
03.1 Unpacking
WARNING!!!
Carefully read before installing, powering or servicing.
Nothing to do if anything misunderstand! Installation can be done only
by a qualified professional in accordance with relevant local codes.
01.1 Risk of eyes damage
All dimensions are in milimeters
03 Installation
- Unpack carefully.
- This is electronic equipment and should be handled carefully.
- Damaged delivered package or if are any mechanical parts broken – it must be claim
immediately by the transport company. Photo pictures as evidence are valuable for
future claim.
03.2 Physical installation
- Loading capacity of bearing area has to be at least 10 times the weight of all device clusters
(luminaries, clamps, cables, ...).
- Heigrbreadth from combustible materials is 0,5m.
03.3 Connecting to AC power
max.115
- Do not look directly into LED lamps.
- Do not look into light beam from a distance of less than 40 cm (16 inches)!
01.2 Protection from electric shock
max.115
Following items are included:
- LL A3 BIG POINT 01 BASIC with 1,5m cable
1 pc.
- LL BRACKET A3 BIG POINT
1 pc.
- User manual
1 pc.
- Shut down power before installation or maintenance.
- Luminaries and recommended AC power supply must be installed by a qualified professional
in accordance with relevant local codes. Only acceptable source of AC power and frequency
that complies with local building and electrical codes to use.
- Do not use or do not connect the products if the power cable, power plug or fixtures are any
way damaged, wet, or if they are overheating.
- Do not modify, alter, or attempt to service the LeaderLight appliance. Doing so will void the
warranty.
- Before removing or installing any cover or part of appliance disconnect it from AC power.
- Appliance always connect to earth (eltech.).
To tackle all Safety Information- 01!
For protection from electric shock, the device must be grounded (earthed)!
It is not necessary to open the fixture before power supply.
Power supply is solved simple with 1,5m cable
- Cord plug connections:
Symbol
Pin
Wire Colour
Screw (US)
L
live
brown
yellow or brass
N
neutral
blue
silver
ground (earth)
yellow/green
green
01.3 Fire prevention
Additional items needed:
- Mounting
accessories as necessary
Content:
01 SAFETY INFORMATION
01.1 Risk of eyes damage
01.2 Protection from electric shock
01.3 Fire prevention
02 Product Specification
02.1 Technical Specification
03 Installation
03.1 Unpacking
03.2 Physical installation
03.3 Electrical installation
04 Maintenance
- Follow all safety consideration.
- Thermostatic switches or fuses never to bypass.
- Device never shield. Around the axis of the fitting (180°) must be maintained space for
cooling. Minimum distance from the surrounding objects must be 100mm (4 in.).
- LEDs never direct cover with filters or other materials.
- Allowing max. ambient temperature is 40°C (104°F).
LL A3 BIG POINT 01 BRACKET W/N is not suitable for standard dimming!
02 Product Specification
02.1 Technical Specification
Lamp type: 1 x Acriche (White 6300°K and Neutral 3000°K)
Lifetime: Over 35 000 hrs
Optic: Standard 5°, on request: 25°, 40°, 60°
Max. input power: 4,6W
04 MAINTENANCE
220-240V 50/60Hz AC 1,5m cable
Power connection:
On request US version: 100-120V
Net weight: 0,35 kg
Environment
Dimensions HxΦ: 59mm x 60mm without bracket
IP: IP65
Ambient temp. (Ta): Maximum 40°C
Cooling: Conventional
Do not throw away the appliance with the normal household waste at the end of its life,
but hand it in at an official collection point for recycling. By doing this, you help to preserve
the environment.
©MMX - Leader Light – All right reserved
- To tackle all Safety Information- 01!
- Damage caused by inadequate cleaning or maintenance is not coveredby warranty.
- Regular cleaning is demand (dust, dirt, ...).
Materials and finish: Housing: powder-painted anodized aluminium RAL9006
(other colours on request)
Installation: Surface mounting
Edition: A - 2010
Maintenance policy:
- Unplug mains before maintenance and at least 10 minutes cool off
- Appliance do not illegal open or demount
- Clean-up dust only from outer surface (for ex. diffuser and lenses).
- Use vacuum or dumpy duster (warm water)
- Before reinstalling to check failure-free state – no wet parts!
If you have any question please, contact support@leaderlight.sk
Installation
Surface mounting is easy by using bracket.
Mounting on surface with bracket
LL41 500
1.4.1 The power cable string on bracket. The bracket screw on the basic unit.
Connect the fixture to AC power supply and fix the bracket with screws to the surface.
AIMING POSSIBILITY
The fixture could be aim to wish
position with bracket.
Order code
Product name
LL33 520
LL A3 BIG POINT 01 BRACKET W
LL33 530
LL A3 BIG POINT 01 BRACKET N
If you have any question please, contact support@leaderlight.sk
Download PDF