R0E000010CKZ00 User`s Manual (14-Pin to 38

Add to my manuals
4 Pages

advertisement

R0E000010CKZ00 User`s Manual (14-Pin to 38 | Manualzz

R0E000010CKZ00

14-Pin to 38-Pin Conversion Adapter for the E1 Emulator

1. Outline

The R0E000010CKZ00 adapter is used to connect the 14-pin

2.54-mm pitch connector on the head of the E1-specific user- system interface cable to 38-pin 0.5-mm pitch connectors.

Using this conversion adapter allows connection of the E1 even if your system only has the 38-pin connector for the E20.

REJ10J2122-0100

Rev.1.00

Apr. 01, 2010

Before using this product, confirm that the R0E000010CKZ00 package contains the following items.

(1) R0E000010CKZ00 conversion adapter....................... 1 pc.

(2) R0E000010CKZ00 user's manual (this document)

3. Specifications

Table 1 Specifications

Item Description

Upper connector

(CN1)

HTST-107-01-T-DV-P-TR

(manufactured by Samtec, Inc.)

Lower connector

(CN2)

Guaranteed number of times for insertion and removal: 50

5767007-8

(manufactured by Tyco Electronics

Corporation)

Guaranteed number of times for insertion and removal: 50

4. Usage (See Figure 2)

The R0E000010CKZ00 is connected between the 14-pin connector on the head of the user-system interface cable (for the E1) and a 38-pin connector on the user system as shown in figure 2.

5. Restrictions

The R0E000010CKZ00 allows connection of the E1 to a user system on which the only mounted connector is for the E20.

However, the only available functions are those of the E1.

Functions specific to the E20 are not available.

Figure 1 External View of the R0E000010CKZ00

CN1

CN2

Pin 38

Pin 2

User-system interface cable for the E1 (R0E000010KCE00)

14-pin to 38-pin conversion adapter (R0E000010CKZ00, i.e. this product)

38-pin connector on the user system (2-5767004-2: manufactured by Tyco

Electronics Corporation)

User system

Figure 2 Usage of the R0E000010CKZ00

REJ10J2122-0100 Rev.1.00

Apr. 01, 2010

Page 1 of 4

6. Precautions

IMPORTANT

Notes on This Product:

z We cannot accept any requests for repairs. z For inquiries about the product or the contents of this manual, contact your local distributor.

Renesas Tools Homepage http://www.renesas.com/tools

7. Correspondence between Pins of CN1 and CN2

Table 2 Correspondence between Pins

CN1 Pin No. CN2 Pin No. CN1 Pin No.

CN2 Pin No.

CN1 Pin No.

CN2 Pin No.

1 15

2 GND bus lead

3 21

5 11

7 8

8 14

9 17

11 19

12 GND bus lead

4

6

7

10

12

13

16

18

20

22

23

24

27

28

29

30

31

32

33

34

35

36

37

38

25

26

Note: ‘

⎯ ‘ indicates that the pin is not used.

8. Preparations

Figure 3 shows the limit on the heights of components mounted around the connector on the user system. Take this limit into account when designing your own system.

CAUTION

An upper limit applies to the heights of components mounted around the connector on the user system.

This limit is only applicable with the following type of connector.

Type number: 2-5767004-2 (manufactured by Tyco Electronics Corporation)

The emulator is connected from this direction.

37

38 2

30 mm

1

Area with limit on mounted components

(heights must be no greater than 5 mm)

Orientation keys

The GND bus lead in the center of the connector must be connected to GND on the user system.

Figure 3 Limit on Height of Components Mounted on the User System

REJ10J2122-0100 Rev.1.00

Apr. 01, 2010

Page 2 of 4

Regulatory Compliance Notices

European Union regulatory notices

Environmental Compliance and Certifications:

・WEEE Directive (2002/96/EC)

Renesas development tools and products are directly covered by the European Union's Waste Electrical and Electronic Equipment,

(WEEE), Directive 2002/96/EC. As a result, this equipment, including all accessories, must not be disposed of as household waste but through your locally recognized recycling or disposal schemes. As part of our commitment to environmental responsibility Renesas also offers to take back the equipment and has implemented a Tools Product Recycling Program for customers in Europe. This allows you to return equipment to Renesas for disposal through our approved Producer Compliance Scheme. To register for the program, click here

“ http://www.renesas.com/weee ".

REJ10J2122-0100 Rev.1.00

Apr. 01, 2010

Page 3 of 4

Notice

1. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website.

2. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas

Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others.

3. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part.

4. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information.

5. When exporting the products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations.

6. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free.

Renesas Electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein.

7. Renesas Electronics products are classified according to the following three quality grades: "Standard", "High Quality", and "Specific". The recommended applications for each Renesas

Electronics product depends on the product's quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application categorized as "Specific" without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as "Specific" or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics. The quality grade of each Renesas Electronics product is "Standard" unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc.

"Standard": Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots.

"High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; safety equipment; and medical equipment not specifically designed for life support.

"Specific": Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life.

8. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges.

9. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures.

Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you.

10. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use

Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS

Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations.

11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics.

12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries.

(Note 1) "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majority-owned subsidiaries.

(Note 2) "Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics.

SALES OFFICES

Refer to "http://www.renesas.com/" for the latest and detailed information.

Renesas Electronics America Inc.

2880 Scott Boulevard Santa Clara, CA 95050-2554, U.S.A.

Tel: +1-408-588-6000, Fax: +1-408-588-6130

Renesas Electronics Canada Limited

1101 Nicholson Road, Newmarket, Ontario L3Y 9C3, Canada

Tel: +1-905-898-5441, Fax: +1-905-898-3220

Renesas Electronics Europe Limited

Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K

Tel: +44-1628-585-100, Fax: +44-1628-585-900

Renesas Electronics Europe GmbH

Arcadiastrasse 10, 40472 Düsseldorf, Germany

Tel: +49-211-65030, Fax: +49-211-6503-1327

Renesas Electronics (China) Co., Ltd.

7th Floor, Quantum Plaza, No.27 ZhiChunLu Haidian District, Beijing 100083, P.R.China

Tel: +86-10-8235-1155, Fax: +86-10-8235-7679

Renesas Electronics (Shanghai) Co., Ltd.

Unit 204, 205, AZIA Center, No.1233 Lujiazui Ring Rd., Pudong District, Shanghai 200120, China

Tel: +86-21-5877-1818, Fax: +86-21-6887-7858 / -7898

Renesas Electronics Hong Kong Limited

Unit 1601-1613, 16/F., Tower 2, Grand Century Place, 193 Prince Edward Road West, Mongkok, Kowloon, Hong Kong

Tel: +852-2886-9318, Fax: +852 2886-9022/9044

Renesas Electronics Taiwan Co., Ltd.

7F, No. 363 Fu Shing North Road Taipei, Taiwan

Tel: +886-2-8175-9600, Fax: +886 2-8175-9670

Renesas Electronics Singapore Pte. Ltd.

1 harbourFront Avenue, #06-10, keppel Bay Tower, Singapore 098632

Tel: +65-6213-0200, Fax: +65-6278-8001

Renesas Electronics Malaysia Sdn.Bhd.

Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No. 18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia

Tel: +60-3-7955-9390, Fax: +60-3-7955-9510

Renesas Electronics Korea Co., Ltd.

11F., Samik Lavied' or Bldg., 720-2 Yeoksam-Dong, Kangnam-Ku, Seoul 135-080, Korea

Tel: +82-2-558-3737, Fax: +82-2-558-5141

If the requirements shown in the "CAUTION" sentences are ignored, the equipment may cause personal injury or damage to the products.

http://www.renesas.com

Renesas Tools Website http://www.renesas.com/tools

All trademarks and registered trademarks are the property of their respective owners.

© 2010 Renesas Electronics Corporation and Renesas Solutions Corporation. All rights reserved.

Colophon 1.0

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement