User Manual
NMEA 2000 / Ethernet
Document code: MN67223_ENG
Revision 1.001
Page 1 of 17
Industrial Electronic Devices
User Manual
Revision 1.001
English
NMEA 2000 / Ethernet - Converter
(Order Code: HD67223-A1 – HD67223-B2)
for Website information:
www.adfweb.com?Product=HD67223-A1
www.adfweb.com?Product=HD67223-B2
HD67223-A1
for Price information:
www.adfweb.com?Price=HD67223-A1
www.adfweb.com?Price=HD67223-B2
HD67223-B2
Benefits and Main Features:
Similiar
Products
Mountable on Rail DIN
TCP/UDP protocols changeable with software
Easy to use software configuration
Industrial temperature range:
-40°C / 85°C (-40°F / 185°F)
For others Converter / Adapter:
RS232 / RS485
See also the following link:
www.adfweb.com?Product=HD67118
USB / RS485
See also the following link:
www.adfweb.com?Product=HD67119
Do you have an your customer protocol?
See the following link:
www.adfweb.com?Product=HD67003
Do you need to choose a device? do you want help?
Ask it to the following link:
www.adfweb.com?Cmd=helpme
ADFweb.com Srl – IT31010 – Mareno – Treviso
INFO: www.adfweb.com
Phone +39.0438.30.91.31
User Manual
NMEA 2000 / Ethernet
Document code: MN67223_ENG
Revision 1.001
Page 2 of 17
Industrial Electronic Devices
INDEX:
INDEX
UPDATED DOCUMENTATION
REVISION LIST
WARNING
TRADEMARKS
SECURITY ALERT
CONNECTION SCHEME
CHARACTERISTICS
POWER SUPPLY
CONFUGURATION
USE OF COMPOSITOR SW67223
NEW PROJECT / OPEN PROJECT
SET COMMUNICATION
RECEIVE NMEA
UPDATE VIA SERIAL
CHARACTERISTICS OF THE CABLES
ETHERNET PROTOCOL
Write Frames
Read Fames
MECHANICAL DIMENSIONS
ORDER CODE
ACCESSORIES
DISCLAIMER
OTHER REGULATIONS AND STANDARDS
WARRANTIES AND TECHNICAL SUPPORT
RETURN POLICY
PRODUCTS AND RELATED DOCUMENTS
UPDATED DOCUMENTATION:
Page
2
2
2
2
2
3
4
6
6
7
7
8
9
10
11
12
13
13
14
15
15
15
16
16
17
17
17
Dear customer, we thank you for your attention and we remind you that you
need to check that the following document is:
Updated
Related to the product you own
To obtain the most recently updated document, note the “document code” that
appears at the top right-hand corner of each page of this document.
With this “Document Code” go to web page www.adfweb.com/download/ and
search for the corresponding code on the page. Click on the proper “Document
Code” and download the updates.
To obtain the updated documentation for the product that you own, note the
“Document Code” (Abbreviated written "Doc. Code" on the label on the product)
and download the updated from our web site www.adfweb.com/download/
REVISION LIST:
Revision
1.000
1.001
Date
09/07/2010
12/02/2013
Author
Dp
Nt
Chapter
All
All
Description
First release version
Added new chapters
WARNING:
ADFweb.com reserves the right to change information in this manual about our
product without warning.
ADFweb.com is not responsible for any error this manual may contain.
TRADEMARKS:
All trademarks mentioned in this document belong to their respective owners.
ADFweb.com Srl – IT31010 – Mareno – Treviso
INFO: www.adfweb.com
Phone +39.0438.30.91.31
User Manual
NMEA 2000 / Ethernet
Document code: MN67223_ENG
Revision 1.001
Page 3 of 17
Industrial Electronic Devices
SECURITY ALERT:
GENERAL INFORMATION
To ensure safe operation, the device must be operated according to the instructions in the manual. When using the device are required for each
individual application, legal and safety regulation. The same applies also when using accessories.
INTENDED USE
Machines and systems must be designed so the faulty conditions do not lead to a dangerous situation for the operator (i.e. independent limit
switches, mechanical interlocks, etc.).
QUALIFIED PERSONNEL
The device can be used only by qualified personnel, strictly in accordance with the specifications.
Qualified personnel are persons who are familiar with the installation, assembly, commissioning and operation of this equipment and who have
appropriate qualifications for their job.
RESIDUAL RISKS
The device is state of the art and is safe. The instrument can represent a potential hazard if they are inappropriately installed and operated by
personnel untrained. These instructions refer to residual risks with the following symbol:
This symbol indicates that non-observance of the safety instructions is danger for people to serious injury or death and / or the possibility
of damage.
CE CONFORMITY
The declaration is made by us. You can send an email to support@adfweb.com or give us a call if you need it.
ADFweb.com Srl – IT31010 – Mareno – Treviso
INFO: www.adfweb.com
Phone +39.0438.30.91.31
User Manual
NMEA 2000 / Ethernet
Document code: MN67223_ENG
Revision 1.001
Page 4 of 17
Industrial Electronic Devices
CONNECTION SCHEME:
Figure 1: Connection scheme HD67223-A1
ADFweb.com Srl – IT31010 – Mareno – Treviso
INFO: www.adfweb.com
Phone +39.0438.30.91.31
User Manual
NMEA 2000 / Ethernet
Document code: MN67223_ENG
Revision 1.001
Page 5 of 17
Industrial Electronic Devices
Figure 2: Connection scheme for HD67223-B2
ADFweb.com Srl – IT31010 – Mareno – Treviso
INFO: www.adfweb.com
Phone +39.0438.30.91.31
User Manual
NMEA 2000 / Ethernet
Document code: MN67223_ENG
Revision 1.001
Page 6 of 17
Industrial Electronic Devices
CHARACTERISTICS:
The Configurable NMEA 2000 Slave to Ethernet gateway allow the
following:
TCP/UDP Ethernet protocols changeable with software;
Mountable on Rail DIN;
Temperature range -40°C to 85°C.
POWER SUPPLY:
Recommended Power Supply
VDC
VAC
24v
12v
Caution: Not reverse the polarity power .
VDC
VAC
Vmin
Vmax
Vmin
Vmax
8v
35v
8v
19v
ADFweb.com Srl – IT31010 – Mareno – Treviso
HD67223-A1
INFO: www.adfweb.com
HD67223-B2
Phone +39.0438.30.91.31
User Manual
NMEA 2000 / Ethernet
Document code: MN67223_ENG
Revision 1.001
Page 7 of 17
Industrial Electronic Devices
CONFIGURATION:
You need Compositor SW67223 software on your PC in order to
perform the following:
Define the parameter of the NMEA 2000 bus;
Define the parameter of the Ethernet;
USE OF COMPOSITOR SW67223:
To configure the Gateway, use the available software that runs with
Windows, called SW67223. It is downloadable on the site
www.adfweb.com and its operation is described in this document.
When launching the SW67223 the right window appears (Fig. 3).
Figure 3: Main window for SW67223
ADFweb.com Srl – IT31010 – Mareno – Treviso
INFO: www.adfweb.com
Phone +39.0438.30.91.31
User Manual
NMEA 2000 / Ethernet
Document code: MN67223_ENG
Revision 1.001
Page 8 of 17
Industrial Electronic Devices
NEW PROJECT / OPEN PROJECT:
The “New Project” button creates the folder which contains the entire device configuration.
A device configuration can also be imported and exported:
To clone the configurations of a Programmable NMEA 2000 to Ethernet Gateway in order to configure another device in the
same manner, it is necessary to maintain the folder and all its contents;
To clone a project in order to obtain a different version of the project, it is sufficient to duplicate the project folder with another name
and open the new folder with the button “Open Project”;
When a new project is created or an existent project is open, it will be possible to access the various configuration section of the
Software.
ADFweb.com Srl – IT31010 – Mareno – Treviso
INFO: www.adfweb.com
Phone +39.0438.30.91.31
User Manual
NMEA 2000 / Ethernet
Document code: MN67223_ENG
Revision 1.001
Page 9 of 17
Industrial Electronic Devices
SET COMMUNICATION:
This section define the fundamental communication parameter of two buses, NMEA 2000 and Ethernet.
By pressing the “Set Communication” button from the main window for SW67223 (Fig. 3) the window
“Set Communication” appears (Fig. 4).
The window is divided in two section, one for the NMEA 2000 and the other for the Ethernet.
The means of the fields for NMEA 2000 are:
In the field “Baud rate” the baudrate for the NMEA 2000 is defined;
If the field “CAN Bus 2.0A” is checked, the CAN with a CobID of 11Bit is used; otherwise if the
field “CAN Bus 2.0B” is checked the CAN with a CobID of 29Bit is used;
In the field “TimeOut Data” insert a time, when this time is elapsed the data isn’t reliable, and in
the Modbus register you can read “FFFF”;
If the field “Peer to Peer” is checked the gateway accept any ID that have the PGN inserted in
the section “Receive NMEA;
If the field “Filter FECA” is checked there is a filter to the alarms with PGN 0xFECA. If the device
send first a message with PGN 0xFECA, after it would send a Transport Protocol frame for
sending the alarms. If this frame arrives within the mS write in the box, the frame with 0xFECA
is discarded and the Transport Protocol frame is held. Otherwise the frame with PGN 0xFECA is
hold.
The means of the fields for Ethernet are:
In the field “IP ADDRESS” insert the IP address;
In the field “SUBNET Mask” insert the Subnet Mask;
In the field “Port” insert the number of port;
If the field “TCP” is checked the Ethernet protocol used is the TCP, otherwise if the field “UDP” is
checked the Ethernet protocol used is the UDP.
Figure 4: “Set Communication” window
ADFweb.com Srl – IT31010 – Mareno – Treviso
INFO: www.adfweb.com
Phone +39.0438.30.91.31
User Manual
NMEA 2000 / Ethernet
Document code: MN67223_ENG
Revision 1.001
Page 10 of 17
Industrial Electronic Devices
RECEIVE NMEA
By pressing the “Receive NMEA” button from the main
window for SW67223 (Fig. 3) the window “Receive NMEA
2000 Frame” appears (Fig. 5).
The means of the fields are:
In the field “Data Page” insert the Data Page, in the
NMEA 2000 protocol is 0 or 1;
In the field “PGN” insert the PGN of the data you
would to read from Ethernet to NMEA 2000 (it is an
identifier);
In the field “Source Address” insert the address of
the device that send the frame;
If the field “Multi Packet” is checked, the Transport
Protocol is enabled for the frame otherwise is
disable;
If the field “Fast Packet” is checked the frame could
use the Fast Packet Protocol functions;
In the field “StartByte” insert the Start Byte of the
Transport Protocol. Insert a value only if the Multi
Frame is enabled;
In the field “N° Byte” insert the number of bytes that
composed the Transport Protocol. Insert a value only
if the Multi Frame is enabled;
If the field “Cancel Data” is checked, the data in the
frame will be erased after the “TimeOut Data” is
expired;
In the field “Mnemonic” the description for the frame
is defined.
ADFweb.com Srl – IT31010 – Mareno – Treviso
Figure 5: “Receive NMEA2000” window
INFO: www.adfweb.com
Phone +39.0438.30.91.31
User Manual
NMEA 2000 / Ethernet
Document code: MN67223_ENG
Revision 1.001
Page 11 of 17
Industrial Electronic Devices
UPDATE DEVICE VIA SERIAL
Section “Update Via Serial” (Fig. 6):
In order to load the parameters or update the firmware in the gateway,
follow these instructions:
Turn off the device;
Connect the Null Modem cable from your PC to the gateway;
Insert the Boot Jumper (see the Fig. 1 for more info);
Turn on the device;
Check the “BOOT Led”. It must to blink quickly (See the Fig. 1 for
more info);
Select COM port and press the “Connect” button;
Press the “Next” button;
Select operations you want to do. Can select only Firmware or only
Project or both;
Press the “Execute update firmware” to start the upload;
When all the operations are “OK” turn off the device;
Disconnect the Boot jumper;
Turn on the device.
At this point the configuration/firmware on the device is correctly updated.
Figure 6: “Update Via Serial” windows
ADFweb.com Srl – IT31010 – Mareno – Treviso
INFO: www.adfweb.com
Phone +39.0438.30.91.31
User Manual
NMEA 2000 / Ethernet
Document code: MN67223_ENG
Revision 1.001
Page 12 of 17
Industrial Electronic Devices
CHARACTERISTICS OF THE CABLES:
The connection at Ethernet socket must be with a Ethernet Cable with a RJ45 Plug
The connection from RS232 socket to a serial port (example one from a personal computer), must be made with a Null Modem cable (a
serial cable where the pins 2 and 3 are crossed).
It is recommended that the RS232C Cable not exceed 15 meters.
ADFweb.com Srl – IT31010 – Mareno – Treviso
INFO: www.adfweb.com
Phone +39.0438.30.91.31
User Manual
NMEA 2000 / Ethernet
Document code: MN67223_ENG
Revision 1.001
Page 13 of 17
Industrial Electronic Devices
ETHERNET PROTOCOL
This protocol is able to read and write frames in the NMEA 2000 net.
Write Frames
The transmission is very simple, it require only what are the packets to send. In a single request it is possible to write at maximum 19 frames in
the NMEA 2000 net. The Bytes that composed the request are these:
Byte Number
1
2
3
4
5
6
7
8÷15
Description
Read / Write Identifier (Read=0x01 / Write=0x02)
Number of frames to send
Priority
Data Page
PGN Hi
PGN Lo
Source Address
Data (Byte 8 is the higher, byte 15 is the lower)
A single frame is composed by 13 bytes (byte 3 to byte 15). Now if the “Number of frame to send” (Byte Number 2) has got a value greater
than one the next frame is composed from byte 3 to byte 15 and so for all the frames.
The response is composed by only one byte. It can have two values:
• 0x00: No Errors;
• 0x01: Parameter Error.
Example:
We want to write two frames with the following characteristics:
Frame 1: Priority=6; Data Page=0; PGN=FECA; Source Address=1; Data=0x0102030405060708;
Frame 2: Priority=6; Data Page=0; PGN=FFCA; Source Address=2; Data=0x1122334455667788.
So the string of hexadecimal numbers is:
REQ:[02][01][06][00][FE][CA][01][01][02][03][04][05][06][07][08][06][00][FF][CA][02][11][22][33][44][55][66][77][88]
RES:[01]
ADFweb.com Srl – IT31010 – Mareno – Treviso
INFO: www.adfweb.com
Phone +39.0438.30.91.31
User Manual
NMEA 2000 / Ethernet
Document code: MN67223_ENG
Revision 1.001
Page 14 of 17
Industrial Electronic Devices
Read Frames
For reading Data it is necessary to have a map in the RAM memory that contains the Data that passing in the bus. This map is implemented in
the “Compositor SW67223” but it has some standard address given by the software. It is possible to see this map in Fig. 5.
The Bytes that composed the request are these:
Byte Number
1
2
3
4
5
Description
Read / Write Identifier (Read=0x01 / Write=0x02)
Starting Address Hi
Starting Address Lo
Number of Byte to read Hi
Number of Byte to read Lo
The Bytes that composed the respons are these:
Byte Number
1
2
3÷n+2
n=Number
Description
Error
TimeOut
Data
of Byte
The Error Byte (Byte 1) can have three values:
• 0x00: No error;
• 0x01: Starting Address doesn’t exist;
• 0x02: Too many Data to read.
The TimeOut Byte (Byte 2) can have three values:
• 0x00: TimeOut not used;
• 0x01: Data consistent;
• 0x02: Data not consistent.
Example:
We want to read ten frames from Starting Address 1. So the string of hexadecimal numbers is:
REQ:[01][00][00][00][10]
RES:[00][01][01][02][03][04][05][06][07][08][09][0A][0B][0C][0D][0E][0F][10]
ADFweb.com Srl – IT31010 – Mareno – Treviso
INFO: www.adfweb.com
Phone +39.0438.30.91.31
User Manual
NMEA 2000 / Ethernet
Document code: MN67223_ENG
Revision 1.001
Page 15 of 17
Industrial Electronic Devices
MECHANICAL DIMENSIONS:
Figure 7: Mechanical dimensions scheme for HD67223-A1
Figure 8: Mechanical dimensions scheme for HD67223-B2
ORDER CODE:
Order Code: HD67223-A1
-
NMEA 2000 / Ethernet - Converter
Order Code: HD67223-B2
-
NMEA 2000 / Ethernet - Converter
ACCESSORIES:
Order Code: AC34001
-
Rail DIN - Power Supply 220/240V AC 50/60Hz – 12 V AC
Order Code: AC34002
-
Rail DIN - Power Supply 110V AC 50/60Hz – 12 V AC
Order Code: AC34104
-
European Input - Power Supply 230V AC 50Hz – 12 V DC
ADFweb.com Srl – IT31010 – Mareno – Treviso
INFO: www.adfweb.com
Phone +39.0438.30.91.31
User Manual
NMEA 2000 / Ethernet
Document code: MN67223_ENG
Revision 1.001
Page 16 of 17
Industrial Electronic Devices
DISCLAIMER
All technical content within this document can be modified without notice. The content of the document content is a recurring audit.
For losses due to fire, earthquake, third party access or other accidents, or intentional or accidental abuse, misuse, or use under abnormal
conditions repairs are charged to the user. ADFweb.com S.r.l. will not be liable for accidental loss of use or inability to use this product, such
as loss of business income. ADFweb.com S.r.l. shall not be liable for consequences of improper use.
OTHER REGULATIONS AND STANDARDS
WEEE INFORMATION
Disposal of old electrical and electronic equipment (as in the European Union and other European countries with separate
collection systems).
This symbol on the product or on its packaging indicates that this product may not be treated as household rubbish. Instead, it
should be taken to an applicable collection point for the recycling of electrical and electronic equipment. If the product is disposed
correctly, you will help prevent potential negative environmental factors and human health, which could otherwise be caused by
inappropriate disposal. The recycling of materials will help to conserve natural resources. For more information about recycling this
product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
RESTRICTION OF HAZARDOUS SUBSTANCES DIRECTIVE
The device respects the 2002/95/EC Directive on the restriction of the use of certain hazardous substances in electrical
and electronic equipment (commonly referred to as Restriction of Hazardous Substances Directive or RoHS).
CE MARKING
The product conforms with the essential requirements of the applicable EC directives.
ADFweb.com Srl – IT31010 – Mareno – Treviso
INFO: www.adfweb.com
Phone +39.0438.30.91.31
User Manual
NMEA 2000 / Ethernet
Document code: MN67223_ENG
Revision 1.001
Page 17 of 17
Industrial Electronic Devices
WARRANTIES AND TECHNICAL SUPPORT:
For fast and easy technical support for your ADFweb.com SRL products, consult our internet support at www.adfweb.com.
Otherwise contact us at the address support@adfweb.com
RETURN POLICY:
If while using your product you have any problem and you wish to exchange or repair it, please do the following:
1) Obtain a Product Return Number (PRN) from our internet support at www.adfweb.com. Together with the request, you need to provide detailed information
about the problem.
2) Send the product to the address provided with the PRN, having prepaid the shipping costs (shipment costs billed to us will not be accepted).
If the product is within the warranty of twelve months, it will be repaired or exchanged and returned within three weeks. If the product is no longer under warranty,
you will receive a repair estimate.
PRODUCTS AND RELATED DOCUMENTS:
Part
Description
URL
HD67118
Converter RS232 to RS485 Isolated
www.adfweb.com?Product=HD67118
HD67119
Converter USB 2.0 to RS485 Isolated
www.adfweb.com?Product=HD67119
HD67007
Gateway Modbus TCP Server to RTU Master
www.adfweb.com?Product=HD67007
HD67010
Gateway Modbus TCP Client to RTU Slave
www.adfweb.com?Product=HD67010
ADFweb.com Srl – IT31010 – Mareno – Treviso
INFO: www.adfweb.com
Phone +39.0438.30.91.31
Download PDF