Delta Industrial 150-03-SS-E5/1-HW-F9-F18 3 in. Stainless Steel 150# Metal Seat Handwheel Handle Knife Gate Valve Specification

Delta Industrial™ Class 150

Knife Gate Valves

Technical Specifications Minerals

• Heavy duty construction ensures long service life

• Guaranteed bi-directional shut-off

• 100% zero leakage

• Pressure fully rated to ANSI B16.34

Class 150

• Full port design reduces pressure drops and minimises turbulence

• Design conforms with MSS-SP135

Designed to reliably perform under the most demanding service conditions

Designed specifically to handle heavy duty slurry applications, its innovative design, industry-leading performance, customisable features and absolute dependability have made our Delta Industrial™ valves the knife gate valve of choice for multiple industries.

The bevelled edge gate design allows the knife gate to crush, cut, sever and expel solids that may be in the fluid stream.

A precisely machined groove positions the elastomeric seat at the edge of the guided gate allowing the valve to seal equally well from either flow direction.

The Delta Industrial™ knife gate valve guarantees 100% zero leakage. On discharge isolation, where the valve must seal tightly from either direction under varying pressure differentials, the Delta Industrial™ performs perfectly.

The Shear-Seal Advantage

Shearing Edges

Extra Thick Gate

Optional hardened material

Metal Seat

Optional hardened surface

Resilient Seat

Solid Body

Above: Side view of bottom port, gate and dual seat.

Applications

• Mining

• Power utilities

• Pulp and paper

• Coal

• Phosphate

• Soda ash

• General industrial • Alumina

• General chemical

• Cement

• Mineral sands

• Kaolin

• Sand and gravel

Materials

• Body: NR Iron as standard.

Other materials available.

• Gate: 316 stainless steel as standard.

Other materials available.

• Seals: Buna N as standard.

Other materials available.

• Other materials include CF8M, Hastelloy™

C-276, SAF 2205 and 2507, Ti.

Size Range

• 50mm (2”) through 1524mm (60").

Maximum Working Pressure

• All sizes 1965 kPa (285 psi).*

Flanges

• ANSI B16.5 Class 150.

• Other flange options available.

* Dependent on material selections.

The Delta Industrial™ guided shear gate design delivers proven, long-life, cost effective performance.

2

1

5

6

7

8

9

4

3

Design Features

• Bi-directional shut off, 100% bubble-tight shut off, zero leakage.

• Transverse seal has packing to energize the seal.

• Enclosed body ensures no leakage to the environment.

• Seal retained out of the flow stream and flush with the bottom port.

• Full port flow reduces pressure drop and turbulence, thus minimising wear.

• Fully guided, bevelled edge machined gate shears through obstructions in flowing media.

• Elastomer port seal is mechanically retained by machine groove with pinhole anchoring.

• No seat cavities where solids can collect and cause gate interference.

• Will operate under vacuum conditions.

• Lexan (a tough polycarbonate material) enclosed top-works with heavy duty lockout mechanism.

• Yoke design allows fitting for all designed actuators.

• Optional coatings, wear rings and overlays for tough slurry duties available.

Delta Industrial™ Class 150 Product Features

1 Solid stainless steel non-rising stem for excellent corrosion resistance and minimum clearance.

2 Highly visible fluorescent coloured stem nut to verify position. Threads of nut coated with Xylan to eliminate the need for stem lubrication.

3 Heavy duty lockout pin for open and close position.

4 Lexan cover protects internal components and eliminates pinch points.

5 Unique transverse seal design and scrapers deliver superior sealing even in high cycle applications.

6 Bevelled edge gate to cut through tough solids.

7 Fully guided gate eliminates gate movement during closing and eliminates gate deformation.

8 Flush-out areas ensure product is expelled by the blade closing action.

9 Mechanically retained seal prevents shifting during valve operation. Seal location and seat design ensure full bi-directional sealing and zero leakage.

Delta Industrial™ Valve's Transverse Gate Seal

Gate

Scraper

Elastomer

Pliable energiser

Scraper

Bevel Gear Hydraulic

Bevel Gear Valve Dimensions

30

32

36

18

20

24

26

28

8

10

12

14

16

3

4

6 in

2

Size mm

50

80

100

150

450

500

600

650

700

200

250

300

350

400 in

-

24.93

28.13

34.14

40.71

44.16

52.47

58.23

64.21

A mm

-

633

715

893

1034

1122

1333

1479

1631

13.60

16.00

19.00

21.00

23.60

68.27

1734 25.43

73.53

1868 27.50

82.61

2098 32.00

90.13

2289 34.25

93.34

2371 36.50

in

6.00

7.60

9.00

11.00

B mm

152

193 16.97

431

229 16.97

431

279 in

-

17.96

C mm

-

456

345 18.05

458

406 19.95

507

483 18.46

469

533 18.46

469

599 22.61

574

646

699

22.61

22.61

750 99.35

2523 38.75

800 106.21

2698 41.75

984

1060

27.32

29.44

900 119.46

3034 46.00

1168 29.44

574

574

813 22.61

574

870 22.86

581

927 23.84

606

694

748

748 in

1.88

150 mm

47.8

2.00

50.8

2.00

50.8

2.25

57.2

2.75

2.75

69.9

69.9

3.00

76.2

3.00

76.2

3.50

88.9

in

2.00

2.00

2.00

2.25

2.75

2.75

3.00

3.00

3.50

D

15S mm

50.8

50.8

50.8

57.2

69.9

69.9

76.2

76.2

88.9

in

2.75

4.00

4.12

2.50

2.88

3.12

3.25

3.62

3.75

15L mm

69.9

101.6

104.6

63.5

73.2

79.2

82.6

91.9

95.3

lb

-

60

76

122

177

217

337

428

583

150 kg

-

27

34

55

80

98

153

194

264 lb

-

62

76

122

177

217

337

428

583

MASS

15S kg

-

28

34

55

80

98

153

194

264 lb

-

97

128

133

184

243

363

511

619

15L

3.50

88.9

3.50

88.9

4.12

104.6

851

4.50

114.3

4.50

114.3

4.50

114.3

1077

386

489

851

1077

386 987

489 1077

448

489

4.50

114.3

4.50

114.3

5.00

127.0

1724 782 1724 782 1906 865

6.00

152.4

6.75

171.5

7.09

180.1

2335 1059 2617 1187 2744 1245

7.00

177.8

7.12

180.8

7.12

180.8

2583 1172 2626 1191 2626 1191

83

110

165

232

281 kg

-

44

58

60

7.00

177.8

7.38

187.5

8.25

209.6

3062 1389 3216 1459 3568 1618

7.00

177.8

8.12

206.2

8.62

218.9

2594 1177 2974 1349 3143 1426

7.00

177.8

8.88

225.6

9.84

249.9

3844 1744 4817 2185 5314 2410

Hydraulic Valve Dimensions

20

24

26

28

30

32

36

10

12

14

16

18

4

6

2

3

8 in

Size mm in

A mm in

B mm in

C mm

250

300

350

400

450

50

80

100

150

200

-

25.58

29.03

36.41

-

650

737

925

46.17

1173

52.00

1321 16.00

61.97

1574 19.00

69.18

1757 21.00

77.27

1963 23.60

83.59

2123 25.43

6.00

7.60

9.00

11.00

13.60

152

193

229

279

345

-

5.13

5.13

8.00

7.50

406

483

533

599

5.00

7.00

8.00

8.00

127

178

203

203

646 10.00

254

-

130

130

203

191

500 91.22

2317 27.50

600 103.55

2630 32.00

650 113.57

2885 34.25

700 118.79

3017 36.50

750 125.00

3175 38.75

699

813

870

927

984

12.00

12.00

12.00

12.00

13.00

305

305

305

305

330

800 135.45

3440 41.75

1060 14.00

356

900 149.72

3803 46.00

1168 14.00

356

150 in

D

15S mm

15L 150 lb

MASS

15S kg

15L in mm in mm lb kg lb kg

1.88

1.88

47.8

47.8

2.00

50.8

2.25

57.2

2.75

69.9

2.75

69.9

3.00

76.2

3.00

76.2

3.50

88.9

3.50

88.9

2.75

3.00

3.00

3.50

3.50

2.00

50.8

2.00

50.8

2.00

50.8

2.25

57.2

2.75

69.9

69.9

76.2

76.2

88.9

88.9

2.75

69.9

4.00

101.6

4.12

104.6

2.50

63.5

2.88

73.2

3.12

3.25

3.62

3.75

79.2

82.6

91.9

95.3

297

516

745

825

4.12

104.6

1103

-

50

82

146

195

135

234

338

375

500

-

23

37

66

88

297

516

745

825

1103

-

52

82

146

195

135

234

338

375

500

-

24

37

66

88

329

542

827

861

1239

-

87

135

157

202

4.50

114.3

4.50

114.3

4.50

114.3

1494

4.50

114.3

4.50

114.3

5.00

127.0

2145

678

973

1494

2145

678 1494 678

973 2327 1056

6.00

152.4

6.75

171.5

7.09

180.1

2611 1184 2893 1312 3020 1370

7.00

177.8

7.12

180.8

7.12

180.8

2806 1273 2849 1292 2849 1292

7.00

177.8

7.38

187.5

8.25

209.6

3137 1423 3291 1493 3643 1652

7.00

7.00

177.8

8.12

206.2

8.62

218.9

3094 1403 3154 1431 3323 1507

177.8

8.88

225.6

9.84

249.9

4142 1879 5115 2320 5612 2546

149

246

375

391

562

-

39

61

71

92

Handwheel Pneumatic

Handwheel Valve Dimensions in

Size mm

10

12

6

8

2

3

4

50

80

100

150

200

250

300 in

15.13

19.08

21.82

26.31

32.53

36.31

45.10

A B C mm in mm in mm

384

485

554

6.00

7.60

9.00

152

193

229

6.50

8.00

8.00

165

203

203

668 11.00

279 12.00

305

826 13.60

345 12.50

318

922 16.00

406 12.50

318

1146 19.00

483 12.50

318

150 in mm

1.88

47.8

1.88

47.8

2.00

50.8

2.25

2.75

57.2

69.9

2.75

69.9

3.00

76.2

D in

15S mm

2.00

50.8

2.00

50.8

2.00

50.8

2.25

2.75

2.75

3.00

57.2

69.9

69.9

76.2

15L in mm

2.75

69.9

4.00

101.6

4.12

104.6

2.50

2.88

3.12

3.25

63.5

73.2

79.2

82.6

lb

95

150

190

310

23

33

49

150 kg

43

68

86

141

10

15

22

95

150

190

310

24

35

49 lb

MASS

15S kg

43

68

86

141

11

16

22 lb

34

70

101

106

157

216

336

15L kg

48

71

98

152

15

32

46 in

Size mm

10

12

14

16

18

20

4

6

2

3

8

250

300

350

400

50

80

100

150

200

450

500

Pneumatic Valve Dimensions

A in mm in

18.65

23.46

26.90

36.22

474

596

683

920

43.54

1106

6.00

7.60

9.00

11.00

13.60

50.24

1276 16.00

60.68

1541 19.00

69.10

76.94

1755

1954

21.00

23.60

83.59

2123 25.43

90.02

763 27.50

B C mm in mm

152

193

229

279

345

3.75

3.75

4.50

7.00

9.00

406 11.00

279

483 13.00

330

533 14.75

375

599 14.75

375

95

95

114

178

229

646 14.75

375

699 14.75

375

150 in

D

15S mm

15L 150 in mm in mm lb kg

2.75

3.00

3.00

3.50

1.88

1.88

47.8

47.8

2.00

50.8

2.25

57.2

2.75

69.9

69.9

76.2

76.2

88.9

2.00

2.00

2.00

2.25

2.75

2.75

3.00

3.00

3.50

50.8

50.8

50.8

57.2

69.9

69.9

76.2

76.2

88.9

2.75

4.00

4.12

2.50

2.88

3.12

3.25

3.62

3.75

69.9

101.6

104.6

63.5

73.2

79.2

82.6

91.9

95.3

37

48

85

141

214

403

669

3.50

88.9

3.50

88.9

4.12

104.6

1345

4.50

114.3

4.50

114.3

4.50

114.3

1651

183

303

958 435

1064 483

610

749

17

22

39

64

97

403

669

958

1064

38

50

85

141

214

1345

1651 lb

MASS

15S kg

183

303

435

483

17

23

39

64

97

610

749

15L lb kg

48

85

137

152

221

429

695

194

315

1041 472

1100 499

22

39

62

69

100

1481 672

1651 749

Weir Minerals [email protected]

www.minerals.weir

Copyright © 2018, Weir Minerals Australia Ltd. All rights reserved. WEIR is a trademark and/or registered trademark of Weir Engineering

Services Ltd. DELTA INDUSTRIAL is a trademark of Weir Pump and Valve Solutions Inc.; HASTELLOY is a trademark and/or registered trademark of Haynes International, Inc. WMD0168/201809