Digital Video Recorder User`s Manual

Digital Video Recorder Client and Network Manual V1.1
Table of Contents
I. PC Client S/W User’s Manual....................................................................................2
1. Introduction of .AVH Files Player ......................................................................2
1.1 Introduction of Function Keys ...................................................................3
1.2 Specific Operation .....................................................................................3
2. Introduction of DVR Network Remote Client....................................................5
2.1 Introduction of Function Keys ...................................................................6
2.2 Specific Operation .....................................................................................7
3. Introduction of DVR Network Files Player ......................................................13
3.1 Introduction of Function Keys .................................................................14
3.2 Specific Operation ...................................................................................15
4. Introduction of DVR Network Assistant Tools.................................................18
II. Network Settings in DVR Menu .............................................................................21
III. DDNS Specification...............................................................................................22
1. Setting up DHCP...............................................................................................22
2. Setting up Server IP Address and Port in the Router ........................................23
2.1 Enter the Router .......................................................................................23
2.2 Setting up Server IP Address and Port .....................................................23
3. Operating DVR Through IE..............................................................................25
3.1 Amending the Security Settings of IE......................................................25
3.2 Installing & Removing ActiveX Controls................................................27
3.3 Browsing and Operating DVR Through WAN (IE).................................28
1
Digital Video Recorder Client and Network Manual V1.1
I. PC Client S/W User’s Manual
Put the accessories CD of the DVR in the CD driver of the computer. Copy the Client
Software onto the computer and open it, then double-click the Client folder
You could see the icon
.
, please double-click it.
1. Introduction of .AVH Files Player
.AVH Files Player could play back-up files. Client’s local video recording files,
USB back-up files and CD files could be played by this player.
Click
to run this software:
2
Digital Video Recorder Client and Network Manual V1.1
1.1 Introduction of Function Keys
Icon
Function
Icon
Function
Open the files
Open/Close audio
Play
Pause
Stop
Frame fast backward
during pause
Frame play during
pause
Screen capture
Fast forward multiple
Select video playing
channels
Switch the file format
from .AVH to .AVI
Exit
1.2 Specific Operation
(1) Look for the files and play
Click
,
you can see the path of opening files:
3
Digital Video Recorder Client and Network Manual V1.1
Select .avh file,
it can not play
other file type.
Click “Open”
to play.
If the file is being playing, the effective channel numbers will turn to bright,
to
from
(2) Capture and save
Use
to capture screen and then save the screen image in another files.
Click the icon above to capture the image, at the same time, the following dialog
box pop up,
Select one folder
from the save path.
Then click “Save” to
save the captured
screen as .bmp file.
(3) Switchover the file format
Click
, switchover the file format from .AVH to .AVI
4
Digital Video Recorder Client and Network Manual V1.1
① Click it to
select.avh file.
② Click it to
select save path.
Click the box
to save
as
the audio.
③Click it, the .avh
file will be changed
into the .avi file.
(4) Exit
Click
to exit.
2. Introduction of DVR Network Remote Client
DVR Network Remote Client is used to watch the live recording, operate DVR
and control PTZ and network video recording.
Click
to run this software.
If a user security code or password was set before, you should type it in. (admin
password is 000000, normal user password is111111)
5
Digital Video Recorder Client and Network Manual V1.1
2.1 Introduction of Function Keys
Icon
Function
Icon
Function
Screen capture
Disk information
Open/Close audio
Password manage
Live record / Stop
Delete DVR IP
Connect/ Disconnect
DVR
Set user information and net
parameter
Exit
Add DVR IP (16 IP could be
added at one time)
Quad-picture display
9-picture display
16-picture display
Control PTZ to rotate
automatically
Control the lens to enlarge
the aperture
Control the lens to reduce
the aperture
Control the lens to prolong
the focus
Control the lens to shorten
the focus
Control the lens to
withdraw the establishing
shot and enlarge the image
Control the lens to reduce
the image and expand the
vision
Control PTZ to rotate
upward/ downward/
leftward/ rightward and
stop auto rotation
Display the DVR name.
Click the names to switch
the previewing video among
DVRs.
6
Digital Video Recorder Client and Network Manual V1.1
2.2 Specific Operation
(1) Add IP of DVR
Click
to add IP of DVR.
Type the IP/ domain name (e.g. 192.168.1.53 or dvrddns.kmip.net) and port (e.g. 6802)
of the DVR which need added. Then type the network user’s name (default user01)
and the password (default 000000 or 111111) of the DVR. If the password is a
super one, the playing speed of the video is faster. At last, click “Enter”, the IP
could be added .
(2) Delete the IP
If you want to delete the IP, click it to select, then click
, the IP could be
deleted. Note: After deleting, all IP are disconnected.
(3) Connect network DVR and preview
①Select one newly added IP to click, then click
connected. You can see the icon
Click
, the DVR could be
appearing. You can preview the live image.
to disconnect.
Note: If connect error, please check the IP is right or not and the netting twine is
connected well or not.
②You can connect more than one DVR to the Client at the same time. Click
“
”, all added DVR can be selected to connect at the same time. You can
preview 16 channels which can be selected and ranged arbitrarily at a time, as
the picture below.
7
Digital Video Recorder Client and Network Manual V1.1
● We can see from here
that two DVR are connected in this
operation. One is “192.168.1.112” (IP), the other is “dvrddns.kmip.net” (domain
name)
● Select preview channels
Move the cursor to a channel, right-click the mouse to pop up DVR names (IP or
. Move the cursor onto one DVR name
domain name), e.g.
to pop up channel numbers, e.g. in the picture above, you can see CH01 to CH16
on the right of DVR “192.168.1.112”. Left-click to select the channel, and the
image display at once.
The DVR name and channel NO. display on the top of the image.
(4) Set
8
Digital Video Recorder Client and Network Manual V1.1
Click
to set “user information” , “net parameter”, “Ptz Set”, “Cam Set” and
“Record Set” for the newly added IP.
a. Set user information. Click ‘User Info”
Type the IP/ domain name (e.g. dvrddns.kmip.net) and port (e.g. 6802) of the DVR
which need setting. Then type the network user’s name (default user01) and the
password (default 000000 or 111111) of the DVR. “Show Name” shows the IP
name, you could change it here as you like. Click “Enter”, the setting is finished.
The new name will be seen here:
.
b. Set net parameter. Click “net parameter”
Introduction of the icons:
9
Digital Video Recorder Client and Network Manual V1.1
Icon
Function
Open/close a certain channel of live
network video recording
Set the frame rate/ image quality of
live browse
Frame rate:3/8/16
Image quality: low/ medium/ high
This function is only for super
password logging in.
Click “Browse” to choose the save
path of network video
Click
and
to save audio and connect the network
automatically. After setting, click “Enter” to save.
c. Set PTZ. Click “Ptz Set”
You could set baudrate, device ID and protocol of each camera.
d. Set camera. Click “Cam Set”
10
Digital Video Recorder Client and Network Manual V1.1
As the above figure showed, you could set these items of each camera.
e. Set record. Click “Record Set”
As the above figure showed, you could set these record parameters of each
camera.
(5) Record
Under the condition of connecting the DVR, you could choose channels through
setting in “Net Parameter”, then click
network. Click
to record locale image through
to stop recording.
(6) Password manage
Click
to manage the password of PC Client.
11
Digital Video Recorder Client and Network Manual V1.1
Click the box as
to use password
system.
If you don’t want to
use password system,
click “Cancel”.
● If you have used password system, you must type in the password to log in PC
Client next time. Admin password could do all operation, normal user password
just could watch the locale video.
● Change the admin password, please click “Set New Admin Password”
Input the new password,
Click “Enter”, the new password will be OK.
The way of changing the normal user password is the same with changing the
administrator password. You must input the administrator password before
changing the normal user password.
(7) View DVR information
Click
to view the hard disk information and working mode of the DVR.
12
Digital Video Recorder Client and Network Manual V1.1
Click it to record when
the DVR is not in
record mode. It cann’t
stop recording.
Introduction of the indicator lights in the above picture:
(Display the current working mode)
Red denotes this function is turned on, white denotes this function is not in use.
ALARM: external alarm indicator light;
PTZ: PTZ operation indicator light;
SEQ: auto switching indicator light;
NET: network connection indicator light;
PLAY: playback indicator light;
REC: record indicator light;
PWR: power indicator light;
LOCK: panel lock indicator light;
IR: remote control available indicator light.
3. Introduction of DVR Network Files Player
DVR Network Files Player could play DVR HDD files remotely through network.
Click
to run this software:
13
Digital Video Recorder Client and Network Manual V1.1
3.1 Introduction of Function Keys
Icon
Function
Play/ Stop
Icon
Function
Network backup
Time point play
Open audio
Fast play
Close audio
Normal play
Screen capture
Log in
Log out
Display the IP that connecting to DVR E.g.
Display the beginning and ending time of the DVR HDD
file. That is the effective playing time. E.g.
Network playing channel
14
Digital Video Recorder Client and Network Manual V1.1
Date selecting
Select the effective time. The up line is the
ending time of backup, the down line is the
beginning time of backup or playing.
3.2 Specific Operation
(1) Log in
Click
to log in.
Type in the server IP and password. Then you could see the following interface.
15
Digital Video Recorder Client and Network Manual V1.1
(2) Playing DVR HDD file.
According to
time displaying, select the right
date and time by
and
.
Then select the right playing channel by
Click
.
to play.
(3) Backup
Click
to backup through network.
Select the beginning and ending time of backup that you need by
, then choose the backup channel
by
, now please click
:
16
Digital Video Recorder Client and Network Manual V1.1
Click it to select
the save path for
backup of live
network video.
Click the box as
, the audio
could be saved.
Click “BACKUP” :
Show backup speed
The above dialog box disappears immediately as soon as backup is finished.
Users could find the backup file in the saving path, and then play it by .avh file
player.
(4) Time play
Click
, choose the time to play.
Click here to select time
17
Digital Video Recorder Client and Network Manual V1.1
4. Introduction of DVR Network Assistant Tools
Network Assistant Tools is used to upgrade software and change channel titles of
non-English letters.
A. Click
to run Network Assistant Tools.
B. Click “CONNECT” to log in
Type in the IP and the password, then click “Enter”, you could see:
18
Digital Video Recorder Client and Network Manual V1.1
Now you could update software and channel titles.
a. Click “Soft Update”
Click “browse” to select the right path for soft update. The item must
be ..\..\update, that is to say the last grade must be “update”, or the software
can’t recognize the file.
b. Update the channel title of DVR through network. Click “Channel Title”:
19
Digital Video Recorder Client and Network Manual V1.1
If the channel title consist of English letters, you needn’t update it here. You can
change it in the DVR directly. Here it is fit for Chinese title. Choose the channel
that need changed from the left channels, then type in the new title and select font.
Click “Preview”, you could preview the new title from the right part. After
setting, click “Change Channel Name”, it will be finished.
Addition: Update the same title at “Channel Set” of DVR, then restart the DVR,
you could see the new title in the video.
20
Digital Video Recorder Client and Network Manual V1.1
II. Network Settings in DVR Menu
This step is set in the DVR. In live preview mode, enter the main menu by remote
control or the “MENU” key on the DVR panel.
Select the icon “
” by “up/down/left/right” keys, then enter network setting
menu by “enter” key.
A. IP address: You’d better set the fourth date from 10 to 99, or it will collide with the
router DHCP. (Note: The IP in DVR menu “network setting” must be the same as
the IP in Router.)
B. Gateway and subnet mask
C. DVR port: Transfer date stream, such as video and audio frequency.
D. IE port: Download ActiveX control. (Default 0080)
E. User name: Set user name of telnet. (Default user01)
F. Password: Set password of telnet. It supports 4 users to log in at the same time.
(Default 111111)
G. Super password: Set password of telnet. It only supports one user to log in at one
time. It owns the most purview and could do remote operation. (Default 000000)
Logging in with the super password, the connection by logging in of common
password will be shut off automatically.
21
Digital Video Recorder Client and Network Manual V1.1
III. DDNS Specification
1. Setting up DHCP
Firstly, please confirm that the DVR is in working mode and HDD & reticle is
connected well and network is OK. Then enter DVR network setting menu.
A. Select DHCP by clicking √ in □. The DVR will get an IP from the Router
automatically, e.g. 192.168.1.112; then set DVR port, IE port, User name and
password. Then exit from the menu and return to live mode.
B.Wait for 20 seconds or so. Then press “INFO” key on the front panel or remote
controller. You could see “dvrddns.kmip.net:*A**** @” in “network information”.
“*A****” is the only code, it cann’t be changed. “@” shows network connecting
well.
Note: If you didn’t select DHCP, you couldn’t see “dvrddns.kmip.net:*A**** @” in
INFO menu.
22
Digital Video Recorder Client and Network Manual V1.1
2. Setting up Server IP Address and Port in the Router
2.1 Enter the Router
Type http://192.168.1.1 in the Address field of Internet Explorer. Then type the
default user name (admin) and password (password) in the following pop-up dialog
box.
Click “OK”, enter the interface of Router setting.
2.2 Setting up Server IP Address and Port
Click Port Forwarding on the left list.
23
Digital Video Recorder Client and Network Manual V1.1
Click “Add Custom Service” in the figure above to pop up a new figure, you could set
two groups of Service IP address and Port (Twice) as follows. One port is “80”, the
other one is “6802”.
Type the IP in the Server IP Address, e.g.192.168.1.112. Type the beginning port
number in the Starting Port box. Type the same port number in the Ending Port box,
e.g. 6802. * Note:They must be the same as the data in DVR “Network
Setting”menu.
Then click “Apply”, you could see:
24
Digital Video Recorder Client and Network Manual V1.1
Note: The Ports must be different from the previous setting in the router.
After finishing all settings, please check the information (include IP, port, IE port etc.)
in the DVR networt menu which is the same with the router’s. Then you could operate
the DVR through wide area network (WAN).
3. Operating DVR Through IE
You could operate DVR remotely through Internet Explorer. Please do the following
steps before using IE.
3.1 Amending the Security Settings of IE
Right-click the icon
, then click “Properties”---“Security” in the pop up
dialog box. You could see the dialog box below.
25
Digital Video Recorder Client and Network Manual V1.1
Click it to pop up
the dialog box —
“security settings”.
Click
●
to pop up the dialog box — “security settings”.
Follow the setting examples in the dialog boxes below to set the items
(7 altogether) that under
as
or
.
26
Digital Video Recorder Client and Network Manual V1.1
Click it to pop up
the dialog box —
“Warning!” below.
Click “Yes”, the setting is OK.
※ Vista PC
If your computer is Vista system, after you finish the above steps, you still need to
close UAC (User Account Control) to make ActiveX controls run normally.
3.2 Installing & Removing ActiveX Controls
(1) Installing ActiveX controls
If you didn’t install ActiveX controls in your computer, the system will prompt
you to install it automatically when you type the IP/domain name and IE port in
the address field of IE explorer, e.g. http://dvrddns.kmip.net
The dialog box below pop up:
Click it to pop up
the dialog box
below.
27
Digital Video Recorder Client and Network Manual V1.1
Click it, ActiveX
controls will be
installed automatically.
You could browse through IE after ActiveX controls has been installed automatically.
(2) Removing ActiveX controls
If you want to change the DVR which is connected to IE or ActiveX controls
updated, you need to remove the former ActiveX controls in your PC.
Step 1 Please find the remove file
in the Client software folder which
is in the attached CD of the DVR. Then double-click it, it will remove ActiveX
controls automatically.
Step 2
Right-click the IE icon
, then click “Properties” in the pop up dialog
box. You can see a dialog box “Internet Properties-General”. Then delete all
cookies, files and history record in “Temporary Internet Files”.
Finish the two steps, ActiveX controls can be removed fully.
3.3 Browsing and Operating DVR Through WAN (IE)
A. Preparation
Finish all settings (include IP, port, IE port etc.) in the DVR networt menu and router.
Then Wait for 20 seconds or so. Then press “INFO” key on the front panel or remote
controller. The following menu pop up.
Software version
@ shows that network
connection is normal.
28
Digital Video Recorder Client and Network Manual V1.1
You could see “dvrddns.kmip.net:*A**** @” in “network information”. “*A****” is
the only code, it cann’t be changed. “@” shows network connecting well.
Note: 1. If you didn’t select DHCP, you couldn’t see “dvrddns.kmip.net:*A**** @” in
INFO menu.
2. The software version is v2.037 or more advanced, or it doesn’t support this
function.
B. Startup IE.
Type the domain name http://dvrddns.kmip.net in the address bar and wait for a moment.
You could see the following interface:
Click the second icon
to enter Network Remote Client.
The operation is the same with PC Client Software.
Note: 1. Please select DHCP in network setup menu.
2. You’d better modify the default user name and password.
29
Download PDF