微型录像笔使用说明书 - Camera2000.com

User Manual
Thank you for using our company's products,
please read the user manual carefully before
use it. When you start to use this device, we
believe that you have read the user manual
carefully.
Attentions
Secure Startup: avoid turning on
the device in the very dry or humid
environment, to prevent damaging of the
device.
Using qualified
maintenance services: only
qualified maintenance personnel can
repair the device, Please do not dismantle the
device by yourself.
Connected to other
devices: when connected to other
devices, please read the user manual
to obtain detailed safety instructions, do not
connect other device that is not equipped
with this device.
Back Up: Important data of this
device please do a back up, any
incorrect o p e r a t i o n a l m e t h o d s
resulting in paper loss,t h e C o m p a n y
s h a l l n o t b e responsible for.
①Video recording/Sound recording/Stop
②Turn O n/O ff/Taking photo
③L E D O n/O ff ④R eset
⑤TF card Slot ⑥M iniU SB ⑦C am era
⑧ LED Light/IR LED Light
Operation Instruction
Note: The following operations are
required to operate in standby mode and
ensure that the identified T-Flash card
was inserted to the card slot properly.
Power on: Press the ② button for three
seconds, the red light and the green light are
on at the same time untill the green light is
off , it indicates the device is turned on and
has entered standby mode.
Video REC: In standby mode, press
shortly ① button once, the green light is
on, now it is in the mode of video
recording.In the video recording mode,
press shortly ①button once , two seconds
later ,the red light is on, video files will be
saved automatically, the device
automatically returns to standby mode, if
you want to record again, just repeat the
above operation.
Sound REC:In the standby
mode,press①button for two seconds, the
red light and the green light are on at the
same time,now it is in sound recording
mode.In the sound recording mode,press
shortly①button once,two senconds
later,the red light is on, sound redording
files will be saved automatically, the
device automatically returns to standby
mode, if you want to record again, just
repeat the above operation.
Taking photo: In standby mode, press
shortly ② button once, then the green light
will twinkle once, it indicates the device has
finished taking photos and automatically
return to the standby mode, If you want to take
photo again, just repeat the above operation.
Power off: In any mode, press the ② key for
two seconds, all lights will turn off, it indicates
the device has been shut off.
Illumination or IR: press shortly ③ key
once,illumination or IR LED is on,press
shortly ③ key again,illumination or IR LED
is off.
Illumination+IR: press shortly ③ key at
the first time, Illumination LED is on, press
shortly③key at the second time , Illumination
LED is off ,IR LED is on, press shortly③key
at the third time,Illumination LED and IR
LED are off.
PC Camera Mode.
Note:Please turn on IR LED if you are in
Charging:
the lightless environment.
In the course of using, if red light twinkling
constantly, please recharge the battery
timely .the machine with the standard
USB2.0 interface, can use computer USB
port to recharge, can also use DC5V charger
to recharge; if the red light is twinkling, it
means it is charging. When red light stops
twinkling and then keeps on red, it means
the recharging finished. please pull out the
machine from computer in time, to prevent
batteries being damaged.
Time:Video files with time
watermarks,the recording time can be
recorded correctly when it is video
recording. it also can be modified ,we
didn’t adjust the time of device when it
came from factory, if you found it is not
accurate , it's easy to adjust by yourself, just
use the USB cable and connect the device
to the computer, at the same time, run the
CD-ROM, copy the file "Time.txt" into root
directory of mobile hard disk,
modify the time and pull out device from
computer, then restart the device and power
off. The modification of time is finished.
PC Camera:Press the ②key and insert
the computer USB, then you can enter the
FAQ:
Q: Why it does not have any response after
pressing the ① and ② button continuously.
A: Because all operation needs going back
to the standby mode, then we can do the
next step. The particular operation is written
in the manual.
Q: Why the time watermark is not accurate
enough after updating the system time?
A: Because the battery support the
working of system time. Please do not
exhaust the battery and charge the battery
in time, or keep the battery full and adjust
the time before you use it.
Q: Why I can not find the mobile hard
disk after the device is connected to the
computer?
A: Please confirm your computer’s
operating system. It can identify and
install the corresponding drivers
automatically in
WINDOWS98SE/ME/2000/X P/MAS
OS/LINUX
WINDOWS98 system need to install
drivers which is recorded in the CD-ROM.
Q: Why the picture is not so clear?
A: The device have not shake resistant
function Please keep not shake your hands
and the object.
Download PDF