HOSAIR AirHealth Pro air purifier User Manual

Below you will find brief information for air purifier AirHealth Pro. The AirHealth Pro air purifier utilizes multiple advanced technologies, including high efficient double-layer catalytic activated carbon, HEPA particle filter, photocatalyst, and sterile lamp conditioning, to effectively remove dust, smog, odor, pollen, bacteria, and viruses from the air. It features an advanced dust, smog, and odor sensor and a clear environment quality photoelectric display function.

PDF Download
Document
AirHealth Pro User Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • High efficient double-layer catalytic activated carbon
  • HEPA particle filter
  • Photocatalyst
  • Sterile lamp conditioning
  • Advanced dust, smog, and odor sensor
  • Clear environment quality photoelectric display function
  • Auto mode for adjustable speed based on air quality
  • Multiple fan speed gears
  • Timing ON/OFF function (1-7h)
  • Sleep mode for silent operation

Frequently asked questions

The temperature display window will show two "8" when the filter screen has reached its service life. You can then replace it and reset the indicator by pressing the UV and speed keys for 5 seconds.

First, check if the dust-collecting filter screen is dirty. If it is, clean it. If the issue persists after cleaning, replace the filter screen.

No, for safety reasons, do not operate the air purifier without the front panel installed.
Preparing document for printing…
0%