INSTRUCTION BOOKLET
MILK FROTHER
Model: 62483
2
LAKELAND MILK FROTHER
Thank you for choosing the Lakeland Milk Frother.
Please take a little time to read this booklet before you use your appliance and keep it in a safe place for future reference.
The Milk Frother warms and froths hot milk to create perfect lattes, cappuccinos and café-style hot chocolates. It also froths cold milk for iced coffees, milkshakes and smoothies. Just pour in your milk and pop on the lid and switch on. In next to no time you’ll have enough thick, creamy froth or hot milk for two luxurious drinks. The whisk rotates gently to evenly distribute heat and prevent milk from burning, and can be completely removed for easy cleaning to prevent a build-up of burnt on milk.
Here at Lakeland, our award-winning family-owned business still offers the same excellent quality, value for money and exceptional customer service as when we founded the company back in the 1960s.
Our products are hand-picked and thoroughly tested so you can be sure that everything you purchase will be a pleasure to use for many years to come.
CONTENTS
Product features ............................................................................................................................... 3
Safety cautions .............................................................................................................................4-6
Using your Milk Frother for the first time ..................................................................................... 7
Instru ctions for use ......................................................................................................................8-9
A guide to ingredients ....................................................................................................................10
Recipes .............................................................................................................................................10
Hints and tips ..................................................................................................................................11
Frequently asked questions .........................................................................................................11
Care and cleaning ...........................................................................................................................12
Technical information ....................................................................................................................13
Electrical connections ...................................................................................................................13
Recycling your electricals .............................................................................................................13
7
8
1
2
3
4
PRODUCT FEATURES
1. Lid
2. Silicone ring
3. Whisk holder and whisk
4. Spout
5. Jug
6. Handle
7. Control panel
8. Base
9. Cord and plug
10.Cord storage
6
5
9
10
3
4
SAFETY CAUTIONS
Carefully read all the instructions before using the appliance and keep in a safe place for future reference. Always follow these safety cautions when using the appliance to avoid personal injury or damage to the appliance. This appliance should be used only as described in this instruction book.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user maintenance shall not be done by children unless they are older than 8 and supervised.
• Make sure your electricity supply matches the voltage shown on the appliance.
• Ensure all packaging materials and any promotional labels or stickers are removed
from the appliance before the first use.
• Always inspect the appliance before use for noticeable signs of damage. Do not use if
damaged or has been dropped. In the event of damage, or if the appliance develops a
fault contact the Lakeland customer care team on 015394 88100.
• Do not use this appliance if the lead is damaged. Contact the Lakeland customer care
team on 015394 88100.
• Always use the appliance on a flat, dry, level, heat resistant surface. If the surface is
sensitive, place a heat-resistant board under the appliance.
• Unplug from the mains when not in use and before cleaning. To disconnect, turn the
socket to “off” and remove the plug from the mains socket.
• Do not use any accessories or attachments with this appliance other than those
recommended by Lakeland.
• To protect against fire, electric shock or personal injury, do not immerse cord, plug or
appliance in water or other liquids.
• Do not leave the lead hanging over the edge of a kitchen table or worktop.
• Avoid contact between the lead and hot surfaces.
• For indoor use only.
• For domestic use only.
• This appliance should be used for preparation of drinks as described within the
instructions for use that accompany it.
• Always ensure that your hands are dry before removing the plug from the mains
socket. Never pull the plug out of the mains socket by its lead.
• To avoid injury or possible fire, do not cover the appliance when in use.
• Do not connect this appliance to an external timer or remote control system.
• An extension cable may be used with care. The electrical rating of the cable should be
at least as great as the appliance. Do not allow the cable to hang over the edge of the
worktop or touch any hot surfaces.
• This appliance complies with the basic requirements of Directives 2014/30/EU
(Electromagnetic Compatibility) and 2014/35/EU (Low Voltage Directive).
• A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure the cut off plug is disposed of safely.
• The plastic bags used to wrap this appliance or the packaging may be dangerous. To avoid risk of suffocation, keep these bags out of reach of babies and children. These bags are not toys.
• Keep the Milk Frother, including its plug and lead away from hot ovens, electric and gas burners, flames and hot surfaces.
• touch any moving parts whilst in use. Always switch off the appliance and wait until the whisk has stopped rotating before you open the lid.
• Surfaces may be hot when the Milk Frother is in use or just used. Use the handle and
take care when removing the lid.
• Milk will remain hot for a considerable time after heating and is a scalding hazard.
• Ensure the lid is fully closed before switching on. DO NOT open the lid when milk is
heating, scalding may occur if the lid is lifted.
• Ensure the Milk Frother is securely on the base before switching on. The Milk Frother
must be only used with the base supplied by the manufacturer. DO NOT use the base
with any other appliances.
• Never touch the live parts on the base unit. Always make sure the appliance is switched off at the socket, until in use with the jug in position.
• Keep hands away from the spout when milk is heating, steam is hot.
• The Milk Frother must be filled to at least the ‘MIN’ mark inside before it is switched on. DO NOT fill beyond the ‘MAX MILK’ or ‘MAX FROTH’ level.
• lift or move the Milk Frother while in use.
• Remove the Milk Frother from the base to fill or pour. Pour slowly and do not over-tilt
the Milk Frother.
• leave the Milk Frother unattended while it is frothing milk.
• use metal spoons or other utensils with sharp edges to spoon milk or froth
from the appliance. These will scratch the coating inside. Pour only.
• Only heat milk in the Milk Frother, do not heat any other liquids, apart from the
first use.
• operate empty.
5
6
WARNING: - HOT SURFACES
The lid and jug and surfaces marked with this symbol will get very hot during use.
DO NOT TOUCH as possible injury could occur.
Wear oven gloves when removing the lid, from the jug. Allow the appliance to cool completely before touching these surfaces, handling, moving or storing this appliance.
• Be careful when removing the lid.
• Remove the lid slowly with the
opening facing away from you.
Be careful as hot steam will escape and can cause scalding and burns.
USING YOUR MILK FROTHER FOR THE FIRST TIME
WARNING: DO NOT insert the plug into an electrical socket, or turn on the Milk Frother before you have fully assembled it.
1. Unpack the Milk Frother, remove all the packaging materials.
2. Before first use, wipe the jug with a clean damp cloth.
3. Wash the lid, silicone ring, whisk and whisk holder in warm soapy water, rinse and dry.
4. Place the Milk Frother on a flat, dry, level, heat resistant surface. If the surface is sensitive, place a heat-resistant board under the appliance.
5. Any excess cord can be wrapped around the cord storage area under the base unit.
Guide the cord through the gap in the base.
6. Insert the whisk holder and whisk
inside the jug. The whisk magnet will
click into place once the whisk holder is
located over the spindle.
7. Stand the jug on the base unit. Fill it with tap water to the ‘MAX FROTH’ level inside
the jug.
8. Add the lid, plug in and switch on at the socket.
9. Press the HOT DENSE FROTHING button once. The button will illuminate red,
and the whisk will start to rotate.
10. The light will flash three times and go out. The whisk will automatically stop
when the water is warm.
11. Discard the warm water, the appliance is now ready to use.
FOR FROTHING MILK
You need to use the whisk holder and whisk.
FOR HEATING MILK
You only need to use the whisk holder. To remove the whisk place your thumbs on the whisk to click off.
7
8
INSTRUCTIONS FOR USE
WHISKS FUNCTIONS BUTTON MAX CAPACITIES COMPLETION TIME IN SECONDS
Cold Milk
Frothing
Hot Light
Frothing
125ml
125ml
115-125
90-150
Hot Dense 125ml
Frothing
90-150
Hot Milk 250ml 150-240
TO MAKE COLD MILK FROTH
You can froth 125ml of cold milk in 2 minutes.
1. Plug in the Milk Frother and switch it on at the socket.
2. Make sure the Milk Frother is filled to at least the ‘MIN’ mark, and no further than
the ‘MAX FROTH’ mark inside the jug, or the motor will burn dry or over flow through
the lid.
MAX MILK mark
MAX FROTH mark
MIN mark
3. Press the COLD MILK button. The whisk will start to rotate and the light will
illuminate BLUE, to show it is frothing cold milk.
4. The light will flash three times and go out. The whisk will automatically stop when
your frothed milk is ready.
5. If you wish to stop the appliance at anytime, press the OFF button.
TO MAKE HOT FROTHING MILK – LIGHT AND DENSE
You can froth 125ml of hot milk in less than 2½ minutes.
1. Plug in the Milk Frother and switch it on at the socket.
2. Make sure the Milk Frother is filled to at least the ‘MIN’ mark and no further than
the ‘MAX FROTH’ mark inside the jug, or the Milk Frother will burn dry or overflow
through the lid.
3. Press the HOT FROTHING LIGHT or HOT FROTHING DENSE button once. The whisk
will start to rotate and the light will illuminate RED, to show it is frothing warm milk.
4. The light will flash three times and go out. The whisk will automatically stop when
your frothed milk is ready.
5. If you wish to stop the appliance at anytime, press the OFF button.
TO MAKE HOT MILK
You can heat 250ml of hot milk in less than 3 minutes.
1. Plug in the Milk Frother and switch it on at the socket.
2. Make sure the Milk Frother is filled to at least the ‘MIN’ mark, and no further than
the ‘MAX MILK’ mark inside the jug, or the motor will burn dry or over flow through
the lid.
3. Press the HOT MILK button, the whisk will start to rotate and the light will illuminate
RED, to show it is heating milk.
4. The light will flash three times and go out. The whisk will automatically stop when
your frothed milk is ready.
5. If you wish to stop the appliance at anytime, press the OFF button.
WARNING
• Ensure the lid is fully closed before switching on.
• DO NOT open the lid when milk is heating, scalding may occur if the lid is lifted.
• DO NOT touch any moving parts whilst in use. Always switch off the appliance
and wait until the whisk has stopped rotating before you open the lid.
• Remove the Milk Frother from the base to fill or pour. Pour slowly and do not
over-tilt the Milk Frother.
9
A GUIDE TO INGREDIENTS
• Different milks, for example UHT long life, fresh semi-skimmed milk and whole milk
will all froth to different levels so you may need to reduce the amount of milk you use.
• The Milk Frother works well with several non-dairy milks such as almond, oat and
soya milk.
• Semi-skimmed milk often gives the best results for frothing.
• Add your other ingredients (for example, coffee, drinking chocolate) to your mug
and pour the warmed milk on top of them.
10
RECIPES
FROTHED MILK - USING THE WHISK HOLDER AND WHISK
CAPPUCCINO
1/3 espresso.
Add 2/3 frothed milk.
Top with cocoa powder.
LATTE MACCHIATO
Pour frothed milk in a tall glass.
Add espresso carefully along rim of the glass.
INSTANT FROTHY COFFEE
Make instant coffee.
Add frothed milk.
HOT MILK - USING THE WHISK HOLDER
CAFFÈ LATTE
1/3 espresso shot.
Add 2/3 heated milk and stir.
HOT CHOCOLATE
Heat milk with hot chocolate flakes.
Pour into mug and add marshmallows.
INSTANT MILKY COFFEE
Place instant coffee granules in a cup.
Add hot milk and stir to mix.
HINTS AND TIPS
• Only heat milk in the Milk Frother.
• The Milk Frother can be used with milk and hot chocolate flakes. Pour the milk into the frother first, then add the flakes. Use the hot milk setting.
• Certain types of milk, for example long life, can froth more than others, so your milk may leak out - reduce the amount of this milk next time you heat it.
• Rinse the jug as soon as you have finished using it and it will be easier to clean.
• If you are making two or three frothy drinks at once, make one amount of hot milk using just the whisk holder and divide between the mugs. Then add the whisk and make one amount of frothy milk and divide that between the mugs.
• After frothing or heating allow 2 minutes for the thermostat to reset, to shorten this time, rinse with water and wipe dry after each use.
• Cold milk can be frothed with this Milk Frother, however this doesn’t cool down the milk. The Milk Frother works at normal temperature in this condition.
• Keep the whisk in a safe place. It is small and can easily be lost.
• For best results, the milk should be 5 - 10°C before using in the Milk Frother.
FREQUENTLY ASKED QUESTIONS
Question: Why is milk and froth spilling out through the lid?
Answer: Too much milk has been put into the jug. Make sure milk is below the maximum fill lines and you are using the correct whisk.
Question: Why won’t the jug switch on?
Answer: The jug may not be sat properly on the base. Check the jug is sat correctly on the base, and check that the power is switched on at the socket.
11
12
CARE AND CLEANING
• Unplug the base unit and allow the Milk Frother to cool completely before cleaning.
• Clean thoroughly before using for the first time and after every use.
• Check the parts for wear or damage after every few uses.
• DO NOT use abrasive cleaners, or steel wool.
• Never immerse the base unit or jug in water or any other liquid.
• To clean the base unit, wait until it has cooled and wipe with a clean damp cloth and dry thoroughly before storing.
• Rinse the inside of the jug with hot soapy water, rinse with clean water and dry thoroughly.
• DO NOT use hard or sharp objects to clean inside the jug, this will damage the non-stick coating.
• To clean the whisk and holder, push the whisk off the holder.
• Clean the lid, silicone ring, whisk and holder with warm soapy water, rinse and dry thoroughly.
• DO NOT put any parts of the Milk Frother in the dishwasher.
• DO NOT use metal spoons or other utensils with sharp edges to spoon milk or froth from the appliance. These will scratch the coating inside. Pour only.
• Store the Milk Frother with the power cable loosely coiled. Never wrap it tightly around the appliance.
TECHNICAL INFORMATION
• Power: 500W.
• Voltage: 220-240V.
• Frequency: 50/60Hz.
• Flex length approx. 90cm. (35½").
ELECTRICAL CONNECTIONS
THIS APPLIANCE MUST BE EARTHED
This appliance is fitted with a fused three-pin plug to BS1363 which is suitable for use in all homes fitted with sockets to current specifications.
CHANGING THE 3 AMP FUSE
Use a 3 amp BS1362 fuse. Only BSI or ASTA approved fuses should be used. If you are unsure which plug or fuse to use, always refer to a qualified electrician.
Note: After replacing or changing a fuse on a moulded plug which has a fuse cover, the cover must be refitted to the plug; the appliance must not be used without a fuse cover.
If lost, replacement fuse covers can be obtained from an electrical shop. This appliance complies with the following EU Directives: 2014/35/EU (Low Voltage Directive) and
2014/30/EU (EMC Directive).
RECYCLING YOUR ELECTRICALS
The Waste Electrical and Electronic Equipment (WEEE) Directive requires
UK distributors to maximise separate collection and environmentally friendly processing of WEEE.
UK distributors (including retailers) are required to provide a system which allows all customers buying new electrical equipment the opportunity to recycle their old items free of charge.
As a responsible retailer, we have met these requirements by offering all customers buying new electrical and electronic equipment free take-back of their old electricals on a like-for-like basis.
13
14
15
Lakeland
Alexandra Buildings, Windermere, Cumbria, UK LA23 1BQ
Tel: +44(0)15394 88100 www.lakeland.co.uk
