ISpring 5-stage, 6-stage, 7-stage Reverse Osmosis Water Filter System User manual

Below you will find brief information for Reverse Osmosis Water Filter System 5-stage, Reverse Osmosis Water Filter System 6-stage, Reverse Osmosis Water Filter System 7-stage. These under-sink systems use a multi-stage filtration process to provide clean, refreshing, and great-tasting bottled water quality right from your tap. The system features polypropylene sediment (PP), granular active carbon (GAC), carbon block (CTO) and optional Calcite mineral alkaline filter and Ultra-Violet filter to improve the taste and quality of your water.

PDF Download
Document
iSpring Reverse Osmosis Water Filter System 5-stage, 6-stage, 7-stage User Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Multiple-stage filtration
  • Under-sink installation
  • Filtered water faucet
  • Optional alkaline mineral filter
  • Optional UV filter
  • 3.2-gallon storage tank
  • Easy to install and maintain
  • Reduced chlorine, sediment, and other impurities
  • Improved taste and quality of water

Frequently asked questions

The required water pressure is between 45 and 80 PSI for systems without a built-in booster pump and 30 to 80 PSI for systems with a built-in booster pump.

The maximum TDS for feed water is 750 ppm.

The cartridges should be replaced every 6 to 12 months. Any significant changes in performance should be investigated immediately to prevent damage to other components.
ALP:
Preparing document for printing…
0%