instruction manual - Product Shop International Ltd

USER MANUAL
04 CHANNELS LCD
DIGITAL VIDEO RECORDER
(DETACHABLE)
INSTRUCTION MANUAL
To obtain the best performance and ensure device function correctly, please read this instruction
manual carefully and completely.
INSTRUCTION MANUAL
To obtain the best performance and ensure device function correctly, please read this instruction manual carefully and
completely.
FCC Compliance
USER-INSTALLER CAUTION: YOUR AUTHORITY TO OPERATE THIS FCC VERIFIED EQUIPMENT
COULD BE VOIDED IF YOU MAKE CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE
PARTY RESPONSIBLE FOR COMPLIANCE TO PART 15 OF THE FCC RULES.
NOTE: THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A
CLASS A DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE
DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE
EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES,
AND CAN RADIATE RADIO FREQUENCY ENERGY AND IF NOT INSTALLED AND USED IN
ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL INTERFERENCE TO RADIO
COMMUNICATIONS.
OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE HARMFUL
INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO CORRECT THE INTERFERENCE AT
HIS OWN EXPENSE.
THIS CLASS A DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN
INTERFERENCE-CAUSING EQUIPMENT REGULATIONS.
WARNINGS, CAUTIONS & COPYRIGHT
WARINGS
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR
MISTURE.
DO NOT INSERT ANY METALLIC OBJECT THROUGH VENTILATION GRILLS.
CAUTION
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Explanation of Graphical Symbols
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the
user to the presence of insinuated "dangerous voltage" within the products enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral rhombus is intended to alert the user to the presence of
important operating and maintenance (servicing) instruction in the literature accompanying the
product.
USERS OF THE SYSTEM ARE RESPONSIBLE FOR CHECKING AND COMPLYING WITH ALL FEDERAL,
STATE, AND LOCAL LAWS AND STATUTES COIPCERNING THE MONITORING AND RECORDING OF
VIDEO AND AUDIO SIGNALS. ULTRAK SHALL NOT BE HELD RESPONSIBLE FOR THE USE OF THIS
SYSTEM IN VIOLATION OF CURRENT LAWS AND STATUTES.
COPYRIGHT
THE TRADEMARKS MENTIONED IN THE MANUAL ARE LEGALLY REGISTERED TO THEIR RESPECTIVE
COMPANIES.
2
TABLE OF CONTENTS
1
2
3
4
5
6
7
8
INTRODUCTION...................................................................................................................... 5
1.1
FEATURE ..................................................................................................................5
1.2
SPECIFICATION......................................................................................................5
HARDWARE OVERVIEW...................................................................................................... 8
2.1
FRONT & BEHIND PANEL ....................................................................................8
2.2
LCD CONNECTION DESCRIPTIO.......................................................................9
2.3
DVR CONNECTION DESCRIPTIO.....................................................................10
2.3
CAMERA&MOTION LOOPING ......................................................................... 11
2.4
EXTERAL ALARM................................................................................................. 11
2.5
IR REMOTE CONTROL .......................................................................................13
2.6
PTZ (PAN, TILT AND ZOOM) CAMERA ...........................................................14
SYSTEM SETUP ..................................................................................................................... 15
3.1
MENU SETUP INTERFACE(GUI).......................................................................15
3.2
LIVE VIEWING AND POP-UP MENU................................................................17
3.3
CAMERA SETUP ....................................................................................................19
3.4
MOTION SETUP.....................................................................................................21
3.5
RECORD SETUP ....................................................................................................22
3.6
ALARM SETUP.......................................................................................................25
3.7
HARD DISK MANAGEMENT SETUP ................................................................26
3.8
NETWORK SETUP ................................................................................................27
3.9
BACKUP SETUP .....................................................................................................29
3.10
SYSTEM SETUP .....................................................................................................31
DVR PLAYBACK.................................................................................................................... 34
4.1
TIME SEARCH .......................................................................................................35
4.2
EVENT SEARCH ....................................................................................................36
BACKUP PLAYBACK ........................................................................................................... 37
5.1
MAIN SCREEN SETTING ....................................................................................37
5.2
USB & LOCAL BACKUP FILE PLAYBACK .....................................................41
5.3
BACKUP FILE TO AVI ..........................................................................................43
NETWORK VIEWING & PLAYBACK............................................................................... 44
6.1
IP ADDRESS SETUP ON PC SITE.......................................................................44
6.2
OPTIONAL MICROSOFT INTERNET EXPLORER SETUP..........................46
6.3
LOGIN ......................................................................................................................47
6.4
REMOTE CONTROL.............................................................................................48
6.5
CONFIGURE ...........................................................................................................53
3GPP APPLICATION & SETTING ..................................................................................... 61
OPERATING INSTRUCTIONS & OSD ARCHITECTURE ............................................. 63
3
APPENDIX A: RECORDING TIME LAPSE (HOURS)............................................................. 66
CIF 66
Half D1 .............................................................................................................................................. 67
APPENDIX B: HDD COMPATIBLE TABLE .............................................................................. 68
APPENDIX C: ERROR MESSAGE LIST.................................................................................... 68
4
1
INTRODUCTION
1.1 FEATURE
H.264 video compression.
120 FPS
Recording quality/ rate adjustment per channel available.
Support CMS (Central Management System)/ 3GPP/ iphone / java.
Audio Backup / Audio Streaming.
Graphic User Interface (GUI).
Support time-point backup function under Ethernet remote control mode. User can
select any time period to process backup from remote side.
Support time-search & event-search function under Ethernet remote control mode.
Up to four online clients for independent remote control; individual live-time, play-back
& time-search function available.
Support PPPoE/ Static/ DHCP IP & DDNS.
Real Triplex, recording/ live-time & playback operation at the same time available.
DVR and LCD Monitor 2 in 1 Design-Saving Your Space and Get Rid of Cable Messes
Monitor and DVR can be taken apart and work independently
1.2
SPECIFICATION
VIDEO
Triplex
MODE
NTSC
IMAGE SYSTEM
PAL
LIVE-TIME RESOLUTION
720x480
720×576
LIVE-TIME DISPLAY RATE
4 × 30 Frame / Sec
4 × 25 Frame / Sec
SPLIT SCREEN
1, 4
VIDEO INPUT
BNC × 4
VIDEO LOOPING
No
VIDEO OUTPUT (BNC)
BNC × 1
VIDEO OUTPUT (SPOT MONITOR)
No
VIDEO OUTPUT (VGA)
YES
AUDIO
AUDIO INPUT
RCA × 1
AUDIO OUTPUT
RCA × 1
AUDIO BACKUP
Yes
AUDIO STREAMING
Yes
RECORDING
5
COMPRESSION TYPE
H.264
RECORDING RESOLUTION (D1)
720×480
720×576
RECORDING RESOLUTION (HALF D1)
720×240
720×288
RECORDING RESOLUTION (CIF)
360x240
360x288
RECORDING RATE (D1)
720 x 480 up to 30 FPS
720 x 576 up to 25 FPS
RECORDING RATE (HALF D1)
720 x 240 up to 60 FPS
720 x 288 up to 50 FPS
RECORDING RATE (CIF)
360 x 240 up to 120 FPS
360 x 288 up to 100 FPS
COMPRESSION RATE
Low
: 1 K Bytes
Medium : 2.2 K Bytes
High
: 3.2 K Bytes
Best
: 6 K Bytes
RECORDING MODE
Manual / Schedule / Alarm
PLAYBACK & SEARCH
PLAYBACK SPEED
Fast Forward
X2 X4 X8
Fast Backward
X2 X4 X8
field by field Playback
Pause
TIME SEARCH
Yes
EVENT SEARCH
Yes
EVENT LIST
3000 records per H.D.D (Maximum)
OSD & CONTROL INTERFACE
TITLE
8 Characters
ON SCREEN DISPLAY & SETUP
Time / Date / Setup Menu
GRAPHIC USER INTERFACE (GUI)
Yes
DVR CONTROL PANEL
No
MOUSE
Yes
IR REMOTE CONTROLLER
Yes
IE BROWSER
Yes
PLAYER
Yes
STORAGE & BACKUP DEVICE
INTERNAL HDD SUPPORT
SATA HDD x 1
USB BACKUP
Yes
NETWORK
ETHERNET
ETHERNET COMPRESSION
FORMAT
IE REMOTE CONTROL
Yes
H.264
Yes
6
NTP
Yes
DDNS
Yes
E-MAIL & FTP
Yes
NETWORK IP
Static/ Dynamic/ PPPoE
MULTI-REMOTE CLIENT
Yes ( 4 Clients at the same time available)
PDA/ CELL PHONE SUPPORT
Yes ( MPEG4 )
3GPP/ iphone/ java
Yes ( MPEG4 )
ALARM
ALARM INPUT
4 In (NO/ NC)
ALARM OUTPUT
1 Out (NO/ NC)
MOTION DETECTION
Yes
MOTION DETECTION AREA
30 x 24 grids
MOTION DETECTION SENSITIVITY
1-100
VIDEO LOSS DETECTION
Yes
ALARM RECORDING
Yes
BUZZER
Yes
SETUP & OTHER FUNCTIONS
DAYLIGHT SAVING TIME
Yes
PTZ CONTROL
Yes
RS-232
No
RS-485
Yes
DIGITAL ZOOM
KEY-LOCK
Yes
Three levels, one for system, one for HDD format and the
other for Network Password.
Yes
MULTI-LANGUAGE
Yes
FIRMWARE UPDATE
USB Host & Update on line
PASSWORD CONTROL
DISPLAY
LCD Panel / Resolution
LCD Brightness / Contrastion
15” TFT LCD / 1024*768
17” TFT LCD / 1280*1024
250nit / 700:1
300nit / 800:1
70/70/60/65
85/85/75/85
View Angle(L/R/D/U)
DC 12V / 5A
POWER INPUT/ CONSUMPTION (W)
DIMENSIONS (W x H x D)mm
360 × 28 × 70
360 × 345 × 195(Lnclud Stand)
392 × 327 × 75
392 × 365 × 193(Lnclud Stand)
5Kg (Without HDD)
6Kg (Without HDD)
WEIGHT (kg)
0 - 45 ℃
OPERATION TEMPERATURE
7
2
HARDWARE OVERVIEW
2.1 FRONT & BEHIND PANEL
DVR OPERATION
NO.
LABEL
1
POWER
2
IR
OPERATION
Led Red Indicator(Lights to have the power to provide)
IR Sensor For Remote Control.
8
PTZ
2.2
LCD CONNECTION DESCRIPTIO
NO.
LABEL
1
DVR
CONNECTOR
2
PC IN
3
LCD POWER
4
AUDIO IN
5
DVI IN(Optional)
OPERATION
DVR and LCD signal input / output connection locations .
Computer's VGA signal input .( SOURCE Switch)
Power switcher: DC 12V 5A / 50-60 Hz input.
Audio input.
Computer's DVI signal input .( Menu Switch)
9
2.3
DVR CONNECTION DESCRIPTIO
NO.
LABEL
OPERATION
1
DVR POWER
RS-485/ ALARM/
RELAY
ETHERNET
Power switcher: DC 12V 5A / 50-60 Hz input.
4 pin connector for external control unit, 5 pin connector for
Alarm input and 3 pin connector for relay
RJ-45 connector for network.
2
3
USB Connector.
4
5
TOTAL SINGNAL
IN/OUT
Video and Audio signal input / output.
USB Mouse Connector (Only by supplied mouse/PS2).
6
7
DVR OUT
8
DVR
CONNECTOR
9
FAN
DVR’s VGA signal output.
DVR and LCD signal input / output connection locations.
DVR with heat.
NOTE: Please plug in the supplied mouse to DVR mouse connector before turn on the
DVR. DO NOT REMOVE and PLUG IN the supplied mouse while DVR is
operating.
10
2.3
CAMERA&MOTION LOOPING
Here recommend link cameras by sequence to avoid unexpected image broken, from CH1,
CH2, CH3, CH4
2.4 EXTERAL ALARM
There are three types of alarms that the system can be configured to handle. They are
Motion detection Alarm, External Alarm and Video Loss Alarm.
A. Motion detection Alarm and External Alarm:
When motion detection or External Alarm was triggered, there are 5 possible actions
will be taken.
a. Changes recording speed as alarm recording speed.
b. Monitor will display corresponding full screen alarm channel, it will switch
automatic mode to manual mode if buttons pressing activity occurred in 5 seconds.
c. Relays can be activated by motion detection or external alarm when turning on.
d. The camera title will be transformed into color of yellow when motion is happening,
“ALARM” text will show up when external alarm is triggered.
B. Video Loss Alarm:
The default setting of Video Loss alarm is enabled.
11
Terminal Connectors:
Do+
RS-485 sends +
Do-
RS-485 sends -
Di+
RS-485 receives -
Di-
RS-485 receives +
ALARM1-4
Camera alarm input.
GND
GND.
N.C
Relay N.C.
COM
Relay COM
N.O
Relay N.O.
EXAMPLE 1:Connect Alarm In One with PIR (Passive Infrared).
EXAMPLE 2:Connect with Alarm Siren at Relay N.O.
12
2.5
IR REMOTE CONTROL
ITEM
REC
Press REC to start recording and press twice to stop.
1-4
Select channel 1-4 with full screen.
QUAD
Fast backward.
Picture by picture backward.
Picture by picture forward.
Fast Forward.
Play video forward.
COPY
Switch channel format(Data Backup).
▲
Move upward or increase the number.
►
Move rightward or increase the number.
▼
Move downward or decrease the number.
◄
Move leftward or decrease the number.
Enter selected items.
MENU
Enter or Exit Main Menu.
STOP
Stop the playback.
13
2.6 PTZ (PAN, TILT AND ZOOM) CAMERA
Following diagram for DVR connect between PTZ camera & joystick controller, for DVR
to control PTZ camera please make sure the CAMERA ID, BANDRATE (default at 9600
bps) and RS-485 cable.
Up
Upto
to 4CH
16CH
Up
Uptoto4CH
16CH
R+ R- T+ T-
R+ R- T+ T-
Dome Cam 4
CH 4
ID 4
Dome Cam 3
CH 3
ID 3
Dome Cam 2
CH 2
ID 2
Dome Cam 4
CH 4
ID 4
A B A B
0 1 0 1
R+ R- T+ T-
Dome Cam 3
ID 3
Up to 128 ID
D0+ D0- D1+ D1-
Dome Cam 3
CH 3
ID 3
Dome Cam 2
CH 2
ID 2
D0+ D0- D1+ D1-
Dome Cam 1
CH 1
ID 1
Up to 128 ID
Dome Cam 1
CH 1
ID 1
A B A B
D+ D- D+ D-
Dome Cam 2
ID 2
D+ D- D+ D-
A B A B
DVR 1
ID 1
DVR 2
ID 2
Dome Cam 1
ID 1
Up to 32 ID
DATA+
DATA-
14
3 SYSTEM SETUP
3.1 MENU SETUP INTERFACE(GUI)
A.
CAMERA SET
B.
MOTION SETUP
C.
RECORD SETUP
D.
ALARM SETUP
E.
HARD DISK SETUP
F.
NETWORK SETUP
15
G.
BACKUP SETUP
H.
16
SYSTEM SETUP
3.2 LIVE VIEWING AND POP-UP MENU
NOTE:The pop-up menu can be activated by moving the mouse cruise to the bottom
of the live viewing screen.
A.
GUI MENU BAR
With live viewing mode, press this button to get into the GUI menu.
B.
DISK INFORMATION
With live viewing mode, press this button to display disk information.
C.
DIGITAL ZOOM
In the full screen mode, left-click the button of the mouse to pull a range to zoom in or
zoom out the image. User can right-click the button of the mouse to disable this
function. (NOTE: Using the mouse to operate digital zoom can zoom in to max. 16
times.) Moreover, user can also use compound key on the front panel to perform this
function. (First, click ENTER/COPY Key and then click ▲▼◄► key to select zoom
in or zoom out position. Finally, click ENTER/COPY key again to complete the setting.
Moreover, click MENU Key to disable digital zoom function. Using the panel key to
perform zoom in function is fixed at 2 times.)
D.
PTZ CONTROLLER
Within live-viewing mode, Clicks this button to get into the PTZ setup menu. User
can also use PTZ key on the front panel to perform this function. Moreover, user can
right-click the button of the mouse or press the PTZ key on the front panel again to
exit PTZ Setup.
NOTE: Only for the camera supported PTZ function.
17
PTZ CONTROL
User can press
key to process
Process PRESET POINT SETUP.
Under PTZ control mode, press
Into PTZ setup menu.User can also
press the “MENU” key on he DVR
front panel to get into PTZ setup
menu.
Left-control direction.”
“
Mouse wheel control the distance.”
“In the center
To process AUTO function.
With the mouse wheel to switch
channels.
PTZ SETUP MENU
ID: Use the mouse wheel to change the ID location speed.
PAN SPEED: Use the mouse wheel to change the left-right speed.
TILT SPEED: Use the mouse wheel to change the up-down speed.
AUTO SPEED: Use the mouse wheel to change the auto patrol speed.
BAUD RATE: Use the mouse wheel to change the BAUD rate.
PROTOCOL: Use the mouse wheel to change the connection protocol.
18
3.3
E.
AUDIO CONTROL
Press this button to turn the audio on or off.
F.
DISPLAY CONTROL
Within live-viewing or playback mode, use display control to switch the camera
channel.
G.
RECORD AND PLAYBACK CONTROL
Same as front panel controller and remote controller.
CAMERA SETUP
Press ▲ or ▼ to select items.
Press ◄ or ► to change values.
Press SET to see more options.
A. CAMERA
Press ◄ or ►/ mouse wheel to switch channels.
B. VIDEO ADJUST
B-1. CONTRAST
Press ◄ or ►/ mouse wheel to change contrast level.
B-2. BRIGHTNESS
Press ◄ or ►/ mouse wheel to change brightness level.
B-3. HUE
Press ◄ or ►/ mouse wheel to change HUE level.
19
B-4. COLOR
Press ◄ or ►/ mouse wheel to change color level.
B-5. SHAPRNESS
Press ◄ or ►/ mouse wheel to change sharpness level.
C. CAMERA TITLE
Use mouse to select and change character.
D. DISPLAY
Press ◄ or ► to/ mouse wheel change value for the corresponding camera would be
displayed on the screen or not.
E. AUTO SWITCH
Press ◄ or ►/ mouse wheel to ON/OFF auto switch and the switch sec..
F. PTZ SETUP
LEFT-RIGHT SPEED: Use the mouse wheel to change the left-right speed.
UP-DOWN SPEED: Use the mouse wheel to change the up-down speed.
AUTO SPEED: Use the mouse wheel to change the auto patrol speed.
BAUD RATE: Use the mouse wheel to change the BAUD rate.
PROTOCOL: Use the mouse wheel to change the connection protocol.
20
3.4
MOTION SETUP
Press ▲ or ▼ to select items.
Press ◄ or ► to change values.
Press SET to see more options.
A. CAMERA
Press ◄ or ►/ mouse wheel to switch channels.
B. MOTION DETECT
Press ◄ or ►/ mouse wheel to change value for motion detect function.
C. BUZZER
Press ◄ or ►/ mouse wheel to change value for buzzer while motion detected.
D. SENSITIVITY
Press ◄ or ►/ mouse wheel to change sensitivity value from 001 (minimum) to 100
(maximum).
E. AREA SETUP
1. Press SET to enter Motion Area Setting. (Note: The default setting of all area is
“MOTION ON”.)
2. Use the mouse to select which block is needed.
The green area shows the area
without motion detection.
21
3. Left-Click the mouse to see more options or exit the setup.
SELECT: Cancel the selected
area.
CLEAR: Select the area without
motion detection.
EXIT: Exit the motion detection
setup.
3.5
RECORD SETUP
Press ▲ or ▼ to select items.
Press ◄ or ► to change
values.
Press SET to see more options.
A. RESOULTION
Press ◄ or ►/ mouse wheel to switch record resolution.
720 x 480 (NTSC)/ 720 x 576 (PAL).
720 x 240 (NTSC)/ 720 x 288 (PAL).
360 x 240 (NTSC)/ 360 x 288 (PAL).
22
B. NORMAL RECORD FPS
Press SET to change the FPS in normal recording. User can click “AVERAGE” to set
PPS automatically by system or change the FPS for each channel manually.
Record Resolution: 720 × 240 ( NTSC ) / 720 × 288 ( PAL )
Record Resolution: 360 × 240 ( NTSC ) / 360 × 288 ( PAL )
C. ALARM RECORD FPS
Press SET to change the FPS in alarm recording. User can click “AVERAGE” to set
PPS automatically by system or change the FPS for each channel manually.
Record Resolution: 720 × 240 ( NTSC ) / 720 × 288 ( PAL )
Record Resolution: 360 × 240 ( NTSC ) / 360 × 288 ( PAL )
23
D. ALARM RECORD DURATION
Press ◄ or ► to set dwell time of alarm recording.
E. RECORD QUALITY
Press SET to switch image quality of each channel. User can use mouse wheel to
change the image quality of each single channel: LOW/ MEDIUM/ HIGH/ BEST, or
use “AVERAGE” to switch the image quality of all channels at once.
F. RECORD MODE
Press ◄ or ► to switch record mode to ALWAYS/ MOTION/ SCHEDULE / OFF.
G. AUDIO RECORD
Press ◄ or ► to switch AUDIO RECORD ON or OFF.
24
H. SCHEDULE SETUP
Press SET to get into schedule setup menu。
1. Use mouse to select schedule day/ time/ mode.
2. Click
3.6
to save change and exit.
ALARM SETUP
Press ▲ or ▼ to select items.
Press ◄ or ► to change values.
Press SET to see more options.
A. EXT. ALARM MODE
Select N.C for “normal close” alarm input, or select N.O for “normal open” alarm
input.
B. ALARM DISPLAY MODE
Press ◄ or ►/ mouse wheel to change value for ALARM DISPLAY MODE with full
screen.
C. VIDEO LOSS DETECT
Press ◄ or ►/ mouse wheel to switch VIDEO LOSS ALARM ON or OFF.
D. EVENT LOG SETUP
Press SET to change value for MOTION EVENT / VIDEO LOSS EVENT to ON /
OFF.
E. BUZZER TIME SETUP
Press SET to set dwell time of BUZZER/ ALARM.
F. RELAY TIME SETUP
Press SET to set dwell time of RELAY.
25
3.7
HARD DISK MANAGEMENT SETUP
Press ▲ or ▼ to select items.
Press ◄ or ► to change values.
Press SET to see more options.
A. OVERWRITE MODE
Press ◄ or ► to change value OVERWRITE MODE ON or OFF.
B. CAPACITY WARNING (When Overwrite Mode is OFF, Capacity Warning will
enable)
Press ◄ or ► to change value to 20/ 15/ 10 or 5% with non-overwrite mode. When
LEFT RATIO is below the setting, it will enable AUDIBLE ALARM (If AUDIBLE
ALARM of BUZZER of ALARM SETUP is ON).
C. HDD INFORMATION
Press SET to display HDD information.
D. HDD FORMAT SETUP
D-1. HDD PASSWORD PROTECT
Press ◄ or ►/ mouse wheel to change value for hard disk format password
protection.
D-2. HDD PASSWORD
Press SET then use mouse to change password.
Default password: 1111
D-3. HDD FORMAT
Press SET to get into FORMAT setup.
Press YES or NO to execute.
26
3.8
NETWORK SETUP
Press ▲ or ▼ to select items.
Press ◄ or ► to change values.
Press SET to see more options.
A. IP MODE
Press ▲ or ▼ to select items and ◄ or ►/ mouse wheel to change to STATIC IP or
DHCP.
B. HTTP PORT
Press ▲ or ▼ to select items and ◄ or ►/ mouse wheel to change WEB PAGE
PORT.
C. IP ADDR
Press ▲ or ▼ to select items and SET to change IP ADDRESS.
D. NETMASK
Press ▲ or ▼ to select items and SET to change SUBNET MASK.
E. GATEWAY
Press ▲ or ▼ to select items and SET to change Default GATEWAY.
F. DNS1
Press ▲ or ▼ to select items and SET to change DNS.
G. DNS2
Press ▲ or ▼ to select items and SET to change OTHER DNS.
H. PPPoE
H-1. PPPoE SETTING
Press◄ or ►/ mouse wheel to ENABLE / DISABLE PPPoE.
H-2. USER NAME
Use mouse to setup user name for ADSL account.
H-3. PASSWORD
Use mouse to setup password for ADSL account.
H-4. STATE
Press SET to display status of PPPoE。
27
I. DDNS SETUP
I-1. DDNS SETTING:Press◄ or ►/ mouse wheel to set DDNS ENABLE /
DISABLE.
I-2. PROVIDER:Press◄ or ►/ mouse wheel to select DDNS provider.
I-3. USER NAME:Press SET to setup user name.
I-4. UPDATE SCHEDULE: Use SET to dwell time of updating schedule.
I-5. STATE:Press SET to display status of DDNS.
J. RTSP SETUP
J-1. RTSP PORT: Press SET to setup RTSP port. The default value is 554.
J-2. RTP START PORT: Press SET to setup RTP start port.
J-3. RTP END PORT: Press SET to setup RTP end port.
J-4. VIDEO QUALITY: Press◄ or ►/ mouse wheel to select video quality. There are
BEST, HIGH, STANDARD, MEDIUM & LOW five options.
28
3.9
BACKUP SETUP
NOTE: *For function stability, Ethernet remote control function (IE) will be
stopped when processing backup function.
*USB DEVICE BACKUP : 3.2MB/ per sec.
A. USB BACKUP
Due to each USB device with different USB driver ICs, their compatibilities differ, too.
This system is compatible with most of USB flash memory. If there is compatible
issue, please refer to APPENDIX B. In addition, please format USB flash memory
with FAT32.
USB BACKUP MENU
User can use the mouse wheel to change the backup Start/ End time。
Click
to start backup, the total process will be shown on screen.
29
BACKUP FILE NAME
Each backup file will be named as START TIME.
EXAMPLE: 174624.264 is 17:46:24
AFTER BACKUP
After backup, the system will copy “R6VIEWER.EXE” automatically on USB device
for the user to play back backup file.
30
3.10
SYSTEM SETUP
Press ▲ or ▼ to select items.
Press ◄ or ► to change values.
Press SET to see more options.
A. DATE / TIME SETUP
Press SET to set DATE / TIME.
A-1. TIME
Use mouse wheel to change DATE/ TIME.
A-2. DATE FORMAT
Use mouse wheel to change DATE. There are DD/MM/YYYY, YYYY/MM/DD
and MM/DD/YYYY three modes.
A-3. NTP MODE
Use mouse wheel to change NTP. When NTP is enable, use SET to change
SERVER IP and use ◄ or ►/ mouse wheel to change GMP and UPDATE
TIME.
B. SYSTEM TYPE
Press ◄ or ►/ mouse wheel to change the system type.
C. KEYBOARD LOCK
Press ◄ or ►/ mouse wheel to switch ON/ OFF. There are OFF, TYPE 1 and TYPE 2
three options.
OFF:UNLOCK.
TYPE 1: Only can switch split screen and full screen. The user can operate AUTO
and MENU functions as well. However, the password has to be filled in to
implement playback mode.
TYPE 2: LOCK (Except MENU button). The password has to be filled in to
implement playback mode.
After KEYBOARD LOCK mode setup, please set up PASSWORD
Without password, un-authorized users could access into SYSTEM SETUP and make
changes of settings easily.
31
D. DVR ID NUMBER
Press ◄ or ►/ mouse wheel to change values.
ID NUMBER is required to make difference of each DVR.
E. DISPLAY SETUP
Press SET to ENABLE or DISABLE display of CAMERA TITLE / DVR STATUS /
DATE / TIME.
F. LANGUAGE
Press ◄ or ► to change on-screen-display (OSD) language.
G. SYSTEM PASSWORD
Press ▲ or ▼ to select items and ◄ or ► to change values.
Default password: 1111.
H. FIRMWARE UPDATE
Press YES to start firmware update. After updated, the DVR will reboot automatically.
At this moment, please do not turn off the DVR manually.
NOTE: 1. Please format USB flash memory with FAT32.
2. For function stability, we suggest user to STOP recording function
before processing firmware update function.
I. LOAD DEFAULT
Press SET button to entry CONFIGURE SET screen. There are LOAD SETUP FROM
DEFAULT, LOAD SETUP FROM USB and BACKUP SETUP TO USB three parts.
I-1. LOAD SETUP FROM DEFAULT: Press SET button to load the setting back to
factory default.
I-2. LOAD SETUP FROM USB: Press SET button to load the pen drive setting to
the current DVR.
I-3. BACKUP SETUP TO USB: Press SET button to backup the current DVR setting
into pen drive.
J. DAYLIGHT SAVING TIME SETUP
Press ◄ or ►/ mouse wheel to change the DAYLIGHT MODE option: Disable,
Manual and Auto.
32
J-1. MANUAL MODE
Use SET
to change the Day Light Saving start and end time.
Press ◄ or ►/ mouse wheel to change DELAY TIME
J-2. AUTO MODE
Press ◄ or ►/ mouse wheel to change CITY option. Different CITY will have
different START, END and DELAY TIME.
33
4 DVR PLAYBACK
Click the playback button on the pop-up
menu.
Note: the pop-up menu can be activated
by moving the mouse cruise to the
bottom of the live viewing screen.
A.
DISK INFORMATION
With playback mode, press this button to display disk and pen drive information.
B.
RECORD BACKUP
With playback mode, press this button to backup record (.264 video backup) and press this
button again to finish backup. For performing the single image backup (.Y42 single image
backup), press
first and then click this button to backup the necessary image.
C.
AUDIO CONTROL
Press this button to turn the audio on or off
D.
DISPLAY CONTROL
Within playback mode, use display control to switch the camera channel.
E.
RECORD AND PLAYBACK CONTROL
Same as front panel controller and remote controller.
34
4.1
TIME SEARCH
Double click Left button of mouse to trigger play time search.
Please set the start and end time to search.
35
4.2
EVENT SEARCH
Double click Left button of mouse to trigger event search.
Please select the event to playback.
NOTE: Display the type of the event as follows.
POWER
V.LOSS
If the DVR got power loss, it will record the date and time of
rebooting.
If REC. button has been pressed, it will record the date and time in the
event list.
When a camera signal is lost, it will record the date, time, and
ALARM
corresponding channel. Moreover, the
icon will display on the
corresponding channel.
When ALARM is triggered, it will record the date, time, and
RECORD
MOTION
corresponding channel. Moreover, the
icon will display on the
corresponding channel.
When MOTION is detected, it will record the date, time, and
corresponding channel. Moreover, the
icon will display on the
corresponding channel.
36
5 BACKUP PLAYBACK
SYSTEM REQUIREMENT
CPU: Intel Celeron 1.6G
MEMORY: 256MB.
VGA: 32MB
VGA RESOLUTION: 1024 x 768.
OS: Windows XP / 2000
SUGGESTED REQUIREMENT
CPU:Intel P4 2.8G
MEMORY:512MB or above
VGA:64MB or above
VGA RESOLUTION:1024 x 768
OS: Windows XP / 2000
5.1
Pause
Play
MAIN SCREEN SETTING
A. MAIN SCREEN
Open File
Channel Selected
Save as AVI
Time & Event Search
Single, 4, 9, 16 Split Screen
37
B. HDD PLAY
Play about all the data from the Hard disk of DVR or perform the specific Time and
Event Search to play.
Note: Unload the DVR HDD first and connect to the PC to play the HDD. DVR
software
(R6Viewer.exe) can get from USB Playback, DVD-RW
Playback and “Player” within “Others” blank of Network viewing.
B-1. TIME SEARCH
Insert search Date and Time and then click
film.
38
to play all the searched
B-2. EVENT SEARCH
It will display all the events which are reserved within the DVR HDD after
press
(Shown in the following) and double click left button of mouse
to trigger event.
B-3. HDD COPY
Copied and reserved the DVR HDD data to other data storage device.
Press
button, the Copy screen will pop-up.
Then, select the “StartTime” and “EndTime”.
After that, press
button to choose the storage destination and press
to start reserving.
39
Finally, the complete information will pop-up while finished storage.
(R6 Viewer.exe) can play not only DVR H.D.D. but also the *.264
and *.Y42 files which are reserved within the data storage devices. (i.e. CD/DVD
disc, pen drive and the PC H.D.D which the data backup from DVR H.D.D)
C. File (*.264) Play
D. File (*.Y42) Play
40
5.2
USB & LOCAL BACKUP FILE PLAYBACK
A. Plug the USB disk into PC or check the local backup folder.
If using USB mode, please double click the player.exe from the pop-up diagram. (As
below)
B. The play backup program would appear on the screen, select "Load File".
41
C. Open the USB disk located driver letter. (Example E:) or the local backup folder, and
pick the file to playback.
The backup file will named as the time when backup, as like:
170319.264 will be 17:03:19
D. Press the play icon to play the video or still picture.
42
5.3
BACKUP FILE TO AVI
A. Please select specific channel to backup.
B. During video playback mode please press AVI bottom
C. Make up a filename and path than press
D. Press AVI bottom
to finish backup.
43
to start.
bottom to start AVI backup.
6
NETWORK VIEWING & PLAYBACK
SYSTEM REQUIREMENT
CPU: Intel Celeron 1.6G
MEMORY: 256MB.
VGA: 32MB
VGA RESOLUTION: 1024 x 768.
OS: Windows XP / 2000
SUGGESTED REQUIREMENT
CPU:Intel P4 2.8G
MEMORY:512MB or above
VGA:64MB or above
VGA RESOLUTION:1024 x 768
OS: Windows XP / 2000
6.1 IP ADDRESS SETUP ON PC SITE
Install cameras inside in LAN or use network cable to connect with PC. This is for
IPInstallerEng.exe to set up IP address of cameras. If OS is Windows XP SP2 or above,
the following Windows Security Alert will popup. Then, please click on Unblock.
Then, IPInstallerEng.exe will popup:
DVR default IP address is 192.168.1.220
44
NOTE: Please input correct network parameters without blank spaces.
On Device Lists, it lists all servers. Click on one server and then its IP setting will show
on the right side. After editing the parameters and clicking on Submit, the following
dialogue box will popup. And, it will reboot the device with new parameters.
45
6.2 OPTIONAL MICROSOFT INTERNET EXPLORER SETUP
OPTION 1: DISABLE ACTIVEX WARNING
A. IE Tools Internet Options Security Custom Level Security Settings
Download unsigned ActiveX controls Enable or Prompt (recommend).
B. IE Tools Internet Options Security Custom Level Security Settings
Initialize and script ActiveX controls not marked as safe
Enable or Prompt
(recommend).
1
2
3
4
5
Above three options are all based on select as the prompt.
As indicated in the dialogue box. Please select "YES."
46
OPTION 2: ADD TO TRUSTED SITES
IE Tools Internet Options Security
Trusted sites
Sites
6.3 LOGIN
A. INSTALL ACTIVEX
B.
START INSTALL ACTIVEX
C.
ACCOUNT & PASSWORD LOGIN
After IP setup and connect to network or LAN, type IP address on IE Browser
directly. The following User name & Password Login window will popup.
47
Default user name: admin
Default password: admin
6.4 REMOTE CONTROL
LIVE VIEWING
DVR Configuration
PTZ Control
System Time
Playback
48
Screen
Time-Point
Format
Backup
REC
Full Screen
A. DVR Configuration
Get into DVR network menu.
B. PTZ Control
PTZ control function panel
Direction Keys
PTZ Zoom in/out
Auto Pan Function
Preset Point
Setup
Up to 32 preset points
for operation
49
C. SYSTEM TIME
Live viewing mode: The current live viewing time.
D. SCREEN FORMAT
Switch screen format and click twice to switch different channels with full screen.
E.
Full Screen. Click again to return.
F.
REC. Videos are saved as AVI file.
G.
Playback
H.
Click
Time-Point Backup
,
and playback window will popup
PLAYBACK by TIME SEARCH & EVENT SEARCH
Playback Time
Time Search
HDD Select
Playback Time
50
Event Search
A. HDD Select
User can select HDD1 or HDD2 for playback
B. Playback Time
User can select the time then press “Time Search” for playback.
C. Time Search
User can select the time then press “Time Search” for playback.
D. Event Search
User can select event item by pressing “Event Search” for playback.
Click
to operate Time-Point backup.
TIME-POINT BACKUP
First, select Start and End backup time which have to among the Record Time.
Then, click Save button to select the position on PC where the user is going to backup the data.
After that, press OK button to start the backup.
Finally, double-click the left button of the mouse to open the saved backup file. The backup file
will named as the time when start to backup, such as,
(20080526113258.264) will be 2008/05/26 11:32:58.
51
OTHER FUNCTIONS
User can use other functions by clicking the left of mouse
A. Snapshot:
User can save any single picture from image.
B. Performance:
User can select image quality (high, medium & low).
C. Use Overlay:
User can use Overlay function.
D. Play audio:
User can play audio function by channel.
Note: remote user can receive audio from DVR & the audio will be saved with image
when processing video backup.
52
6.5 CONFIGURE
A. System - System Information
A-1 SYSTEM INFORMATION
SERVER NAME: This name will show on the IP Installer.
LANUGAGE:There are English, Traditional Chinese, and Simplified
Chinese.
A-2 NTP Setting
NTP SERVER: Revise the time of DVR via different NTP Server.
Note: Time zone and Interval cannot adjust in here (User can adjust both in
DATE and TIME SETUP option of DVR Menu).
B. SYSTEM – USER MANAGEMENT
User Management provides 3 levels of limits of authority: Administrator (the
highest), User, and Guest.
Administrator: Possessing the highest level of authority to operate full functions
within network.
User: Having Live Image and Video Playback authority. Moreover, PTZ controlled
is included as well.
Guest: Only have Live Image authority.
53
Default administrator account:
Username: admin
Password: admin
B-1. ANONYMOUS USER LOGIN:
YES: Accept anonymous user login without password as guest login.
NO: Anonymous login unacceptable.
B-2. USER MANAGEMENT:
Add: Input Username and Password and then click on Add/Set to save.
Modify: Click on selected User name on User List and the following window
will popup. After inputting Password and Confirm Password, click on
OK.
Remove: Click on selected User name on the user list and click on Remove.
C. SYSTEM / SYSTEM UPDATE
C-1. Firmware Upgrade: Click on the “Browse” button to select the latest firmware
and then press “Upgrade” button to upgrade the firmware.
C-2. Load Default: There are three kinds of Settings. One is Load Setup From
Default, another is Load Setup From and the other is Backup
Setup.
Load Setup From Default: Press “Setting” button to load factory default.
Load Setup From: Click on “Browse…” button to select DVR setting file and
then press “Setting” button to upload the setting file to DVR.
54
Backup Setup: Click on “Download” button to download the DVR setting file
into the specific storage device.
D. NETWORK – IP SETTING
D-1.
IP ASSIGNMENT
DHCP: In Dynamic Host Configuration Protocol (DHCP) mode, DHCP
server will get setting done automatically.
STATIC IP: Please input IP address, Subnet Mask, and Gateway based on
network environment.
D-2. PORT ASSIGNEMENT
With IP Share (Router), the following Ports needed to be adjusted in case of
conflict.
D-3. UPnP
If UPnP service is enabled on your computer, the DVR will automatically be
detected and a new icon will be added to “My Network Places”. However, if
UPnP service is disabled, the DVR will not be detected automatically.
Note: UPnP must be enabled on your computer.
E. NETWORK – PPPoE
55
E-1. PPPoE SETTING
Click on Enabled to enable ADSL dial function.
Username: Username for ADSL account.
Password: Password for ADSL account.
After dialed successfully, new IP address will appear.
E-2. SEND MAIL AFTER DIALED
Click on Enabled to enable SEND MAIL AFTER DIALED function.
E-3. SUBJECT
Mail subject.
F. NETWORK / DDNS SETTING
Click on Enabled to enable DDNS function.
56
F-1. DYNDNS.ORG
DDNS SETTING - DYNDNS.ORG
PROVIDER: Select dyndns.org
HOSTNAME: The registered hostname in DYNDNS.ORG.
USERNAME: The registered username in DYNDNS.ORG.
PASSWORD: The registered password in DYNDNS.ORG.
SCHEDULE UPDATE: A period of time to update IP address.
STATE
1. Updating: Information update.
2. Idle: Stop service.
3. DDNS registered successfully, now log by
http://<username>.ddns.camddns.com: Registered successfully.
4. Updating Failed, the name is already registered.
5. Updating Failed, please check your internet connection.
F-2. DDNS.CAMNNDS.COM
57
DDNS SETTING – DDNS.CAMDDNS.COM
PROVIDER: Select ddns.camddns.com
USERNAME: The registered username in DDNS.CAMDDNS.COM.
SCHEDULE UPDATE: A period of time to update IP address.
STATE
1. Updating: Information update.
2. Idle: Stop service.
3. DDNS registered successfully, now log by
http://<username>.ddns.camddns.com: Registered successfully.
4. Updating Failed, the name is already registered.
5. Updating Failed, please check your internet connection.
DDNS Setting Steps:
Press ○
1 “ENABLE” option to enable DDNS function and select ○
2
“ddns.camddns.com” of the provider drop down list which is suggested to use. In
the following, insert ○
3 the username which the user wants to apply
(i.e. DVR_GODDNS in here). After that, click ○
4 “Apply” button to apply a
DDNS domain name.
1.
2.
3.
4.
58
Finally, the DVR domain name○
5 (http://DVR_GODDNS.ddns.camddns.com)
will be shown on the state block.
5.
NOTE:
1. If the user selects another provider which is ddns2.ydsdvr.com, all of the setting
steps are the same with ddns.camddns.com setting.
2. However, if dyndns.org provider is selected, please go to www.dyndns.org website
to register the account first. The user has to fill in the username, password and
hostname for applying the account. After the user applied the account successfully,
the dyndns.org will give the user a complete DDNS domain name.
3. If setting up IP schedule update too frequently, the IP may be blocked. In general,
schedule update every day (1440 minutes) is recommended.
G. NETWORK / Mail & FTP
Click on “Motion” or “Alarm” option to enable Mail Setting and FTP Setting
function.
59
Mail Server: The IP address of Mail Server (i.e. mail.huntelec.com.tw).
Username: The username while log in to the mail server.
Password: The password while log in to the mail server.
Sender’s Mail: The sender’s account when send the mail via this mail server.
Receiver’s Mail: The receiver’s mail address.
Bcc Mail: The receiver’s mail address for Bcc Mail.
Event Subject: The subject of this mail. (Default value is ALARM MAIL)
FTP Server: The IP address of FTP Server.
Username: The username while log in to the ftp server.
Password: The password while log in to the ftp server.
Port: The port number of file transmission. (Default value is 21)
Path: The ftp path where the user wants to reserve the information.
Finally, click on Apply button to reserve the setting.
H. OTHERS / Player Downloaded
User can click “Run” button to download the player to local PC.
I.
OTHERS / RTSP
User can click Video Quality drop down list to change the video quality. There are
Best, High, Standard, Medium and Low options.
60
7
3GPP APPLICATION & SETTING
3GPP (also known as 3rd Generation Partnership Project) is a corporation which formulate
3rd-generation communication standard specification. Via this wireless communication
protocol, the 3G mobile can perform the remote control. The following example is operated by
Sony Ericsson 3G mobile phone:
1. Press MENU KEY to get into menu.
2. Select Internet services
3. In the Internet services page, press
4. Select Enter address, and press Select
More KEY
KEY
5. Select New address,and press Enter
6. Fill in address rtsp:// <<IP>>/channel
KEY
(rtsp://220.137.65.246/CH03) and press Go
To KEY.
61
8. Success with vivid image
7. “Connected to media server” will
appear
* 1. 3GPP BANDWIDTH: Minimum 30kbit /sec. per channel.
2. CONNECTION NUMBERS: Maximum 16 people per channel.
62
8
OPERATING INSTRUCTIONS & OSD ARCHITECTURE
1. Power
Monitor power ON / OFF. At OFF mode, monitor will be at
standby status.
2. 3. Adjust
/
Increase or decrease the value on OSD menu.
and as selection the OSD function item.
Increase value on the OSD Menu
Decrease value on the OSD Menu.
4. Menu
OSD main menu selection, and press again into the osd menu.
5. Source
DVR/ PC switch options.
63
OSD Function
Color:
Contrast
Adjusts background black level of the screen image.
Example:
Brightness
Adjusts fore ground white level of the screen image.
Color Adjust
Adjusts R.G.B color deepness for users.
Color Temp
Adjusts color temperatures for users.
USER-R/G/B, 9300K, 6500K, 5800K, sRGB.
64
Back
Exit OSD menu.
Image Setting:
Clock
Adjusts image distortion appearing as vertical or “noise” on the screen.
Phase
Adjusts image distortion appearing as horizontal or “noise” on the screen.
Gamma
Adjusts image deepness of the screen images.
Sharpness
Adjusts the clarity and focus of the screen images.
Back
Exit OSD menu.
Position:
H.position
Move the screen image left or right.
V.position
Move the screen image up and down.
Back
Exit OSD menu.
OSD Menu:
H.pos
Move the osd menu position left or right.
V.pos
Move the osd menu position up or down.
OSD Timer
Setting the osd menu display time.
Back
Exit OSD menu.
Language:
Allows you to choose among 7 languages as
English, French, German, Spanish, Traditional Chinese
Simplified Chinese, Japanese.
Misc:
Signal sourse
Select the input signal VGA or DVI.
Reset
Returns all controls back to factory setting.
Volume adjust
Control built-in speakers’
Back
Exit OSD menu.
65
APPENDIX A: RECORDING TIME LAPSE (HOURS)
CIF
CIF
H.264
80GB HDD
FPS(Picture Per Sec.)
120
60
30
15
Best
60
120
240
480
Record
High
129
258
516
1032
Quality
Middle
290
580
1160
2320
Low
580
1160
2320
4640
120
60
30
15
Best
120
240
480
560
Record
High
258
516
1032
2064
Quality
Middle
580
1160
2320
4640
Low
1160
2320
4640
9280
120
60
30
15
Best
180
360
720
1440
Record
High
387
774
1548
3096
Quality
Middle
580
1160
2320
4640
Low
1160
2320
4640
9280
120
60
30
15
Best
306
612
1224
2448
Record
High
647
1294
2588
5176
Quality
Middle
1456
2912
5824
11684
Low
2912
5824
11684
23296
120
60
30
15
Best
360
720
1224
2448
Record
High
774
1548
2588
5176
Quality
Middle
1160
2320
5824
11684
Low
2320
4640
11684
23296
120
60
30
15
160GB HDD
FPS(Picture Per Sec.)
250GB HDD
FPS(Picture Per Sec.)
400GB HDD
FPS(Picture Per Sec.)
500GB HDD
FPS(Picture Per sec.)
750GB HDD
FPS(Picture Per sec.)
Record
Best
540
1080
2160
4320
Quality
High
1161
2322
4644
9288
Middle
1740
3480
6960
13920
66
6960
13920
27840
120
60
30
15
Best
720
1440
2880
5760
Record
High
1548
3096
6192
12384
Quality
Middle
2320
4640
9280
18560
Low
4640
9280
18560
37120
Low
3480
1T HDD
FPS(Picture Per sec.)
Half D1
Half D1
H.264
80GB HDD
FPS(Picture Per Sec.)
60
30
15
Best
46
92
184
Record
High
66
132
264
Quality
Middle
94
188
376
Low
186
372
744
60
30
15
Best
92
184
368
Record
High
132
264
528
Quality
Middle
188
376
752
Low
372
744
1488
60
30
15
Best
145
290
580
Record
High
208
416
832
Quality
Middle
290
580
1160
Low
485
970
1940
60
30
15
Best
233
466
932
Record
High
322
645
1288
Quality
Middle
466
932
1864
Low
776
1552
3100
60
30
15
160GB HDD
PPS(Picture Per Sec.)
250GB HDD
FPS(Picture Per Sec.)
400GB HDD
FPS(Picture Per Sec.)
500GB HDD
FPS(Picture Per Sec.)
Record
Best
290
580
1160
Quality
High
416
832
1664
Middle
580
1160
2320
67
970
1940
3880
60
30
15
Best
435
870
1740
Record
High
624
1248
2496
Quality
Middle
870
1740
3480
Low
1455
2910
5820
60
30
15
Best
580
1160
2320
Record
High
832
1664
3328
Quality
Middle
1160
2320
4640
Low
1940
3880
7760
Low
750GB HDD
FPS(Picture Per Sec.)
1T HDD
FPS(Picture Per Sec.)
APPENDIX B: HDD COMPATIBLE TABLE
Brand
Model
Capacity
Speed (RPM)
SEAGATE
ST380815AS
80G
7200 10
ST3160815AS
160G
7200 10
STM3250820AS
250G
7200 10
ST3400620AS
400G
7200 10
ST3750640AS
750G
7200 10
ST310005N1D1AS-RK
1000G
7200
WD
WD2500AAKS
250G
7200
HITACHI
HDS721616PLA380
160G
7200
HDT725025VLA380
250G
7200
HDT725032VLA360
320G
7200
HDP725050GLA360
500G
7200
Last Update Date
2008/3/24
* Please use SATA I Hard Disk and setup the Jumper Block to 1.5 Gb/s Operation. As the
following image,
Jumper Block
APPENDIX C: ERROR MESSAGE LIST
68
ERROR MESSAGE
ERROR STATUS & REASON
DISK ACCESS ERROR!
H.D.D. Data structure Un-moral.
Data does not record into DVR or bad sector on DVR
H.D.D. Please install another H.D.D. and perform the record
again.
UPDATE FILE ERROR!
Please re-download the update file and update again.
FIRMWARE UPGRADE
FAILED
Please reboot the DVR and upgrade the firmware. Please
send the DVR back to repair when DVR is disability.
MEDIA ACCESS FAIL!
The USB file format is incorrect (Please format the pen
drive to FAT32) or Pen Drive is setup to ONLY READ mode
(Please annul ONLY READ mode) when reserve the data by
using Pen Drive. The data cannot be burn into CD/DVD
disc. Please change another CD/DVD disc and backup the
file in CD/DVD disc storage.
NO FILE!
There is no upgrade file within Pen Drive or the name of
upgrade file does not correspond with DVR format. Please
adjust the upgrade file name based on the following
information.
16CH -> UpdateR.bin
08CH -> Update8.bin
04CH -> Update4.bin
USB DEVICE NOT FOUND
NO USB
Pen Drive undetected. Please Unplug the Pen Drive and plug
it again.
BACKUP START TIME
ERROR
Backup start time error.
BACKUPEND TIME ERROR
Backup end time error.
DISK ERROR
The data cannot be burn into CD/DVD disc. Please change
another CD/DVD disc and backup the file.
FAN FAILED
Fan Error Warning.
NO LOG DATA
No Events Record.
SCHEDULE RECORD
The condition is caused by trying to stop recording when
perform the schedule record. Please setup the record to
manual mode and then stop the record.
PLEASE SELECT ONE
CAMERA
The message will be shown while using the ZOOM function
under split screen condition. Please switch the screen into
full screen mode and then operate the ZOOM function.
69
NOTE
Hard disk storage location map
70
Download PDF