To ensure safety while driving
and to comply with laws,
drivers should not watch video or
operate the video device while driving.
Content
Safety Information......................... 2
Media Operation............................ 19
Disc Note....................................... 3
Selecting Play Mode........................ 19
Installation .................................... 4
On-Screen Display Function............ 19
Detaching control panel.................... 5
Digital Video Special Function...... 20
Attaching control panel..................... 6
Multi-subtitle language function....... 20
Electric Connection ...................... 7
Multi-audio language function.......... 20
Remote Control ............................. 8
Multi-angle function......................... 20
Basic Operation.............................11
Title menu function .......................... 20
Control Panel ................................11
AUX/AV Operation.......................... 21
Setup Operation............................ 13
USB Operation............................... 22
Setting animation........................... 13
Card Operation.............................. 23
Setting disc.................................... 13
MP3/WMA/JPEG/MPEG4 Play .........24
Setting radio................................... 14
SWC Operation.............................. 25
Setting wallpaper............ ................14
Specification..................................26
Version about..................................14
Troubleshooting.............................27
Setting time.......... ......................... 14
Setting audio mode......................... 14
Setting video mode......................... 15
Setting OSD language.................... 15
Setting illumination color................. 15
Reset Factory Settings ................... 15
Rear View Camera ........................ 15
Radio Operation............................ 16
Listening to radio.............................16
Storing stations in memory .............. 16
Automatic Memory Storing &
Program Scanning...................... 17
RDS function.................................. 17
-1-
SAFETY INFORMATION
CAUTION:
THIS DIGITAL VIDEO PLAYER IS A CLASS I LASER PRODUCT. HOWEVER
THIS DIGITAL VIDEO PLAYER USES A VISIBLE/INVISIBLE LASER BEAM
WHICH COULD CAUSE .
HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE
THE DIGITAL VIDEO PLAYER CORRECTLY AS INSTRUCTED.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.DO NOT OPEN COVERS AND DO NOT
REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
EQUIPMENT TO RAIN OR MOISTURE.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, AND ANNOYING
INTERFERENCE, USE ONLY THE RECOMMENDED ACCESSORIES.
THIS DEVICE IS INTENDED FOR CONTINUOUS OPERATION.
This product incorporates copyright protection technology that is protected
by method claims of certain U.S. Patents and other intellectual property rights
owned by Macrovision Corporation and other rights owners.Use of this
copyright protection technology must be authorized by Macro vision Corporation,
and is intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
REGION MANAGEMENT INFORMATION:
This Digital Video Player is designed and manufactured to respond to the Region
Management Information that is recorded on a Digital Video disc. If the Region
number described on the Digital Video disc does not correspond to the Region
number of this Digital Video Player, this Digital Video Player cannot play this disc.
-2-
DISC NOTE
Disc formats supported by this
player
Digital
Video
Audio and Video
Disc size 12 cm
VCD
Audio and Video
Disc size 12 cm
CD
Audio
Disc size 12 cm
MP3
Audio
Disc size 12 cm
(although not enough to make it unusable) depending on your handling it and
conditions in the usage environment.
Note these scratches are not an indication of any problem with the player.
Label side
up
Do not touch
the
underside
of the disc
Discs which cannot be played
with this player
Do not
bend
Digital Video-RAM
CDV
CD-G
Wipe the disc from
center
toward the outside
edge
Handling and Cleaning
Dirt, dust, scratches and warping disc
will cause misoperation.
Do not place stickers or make
scratches on discs.
Do not warp discs.
A disc should always be kept in its
case when not in use to prevent from
damaging.
Do not place discs in the following
places:
1.Direct sunlight
2.Dirty, dusty and damp areas
3.Near car heaters
4.On the seats or dashboard
Preparing New Discs with Rough
Spots
A new disc may have rough edges on
its inside and outside edges.If a disc
with rough edges is used, the proper
setting will not be performed and the
player will not play the disc.Therefore,
remove the rough edges in advance
by using a ball point pen or pencil as
shown on the right.To remove the
rough edges, press the s i d e o f t h e pen
or pencil against the inside and outside
edges of the disc.
Disc Cleaning
Use a dry soft cloth to wipe the surface.
If the disc is quite dirty, use a soft cloth
slightly moistured with isopropyl
(rubbing) alcohol. Never use solvents
such as benzine, thinner or conventional
record cleaners as they may mar the
surface of the disc.
Note:
A disc may become somewhat scratched
-3-
Rough spots
on
outside edge
Ball point pen
or pencil
Rough spots
on inside
edge
INSTALLATION
NOTES:
If installation angle exceeds 30 from
horizontal, the unit might not give its
optimum performance.
Choose the mounting location where the
unit will not interfere with the normal
driving function of the driver.
30
Before finally installing the unit, connect
the wiring temporarily and make sure it
is all connected up properly and the unit
and the system work properly.
Use only the parts included with the unit
to ensure proper installation. The use of
unauthorized parts can cause
malfunctions.
Avoid installing the unit where it would
be subject to high temperature, such
as from direct sunlight, or from hot air,
from the heater, or where it would be
subject to dust, dirt or excessive
vibration.
Consult with your nearest dealer if installation requires the drilling of holes or
other modifications of the vehicle.
DIN FRONT/REAR-MOUNT
This unit can be properly installed either
from "Front"(conventional DIN Frontmount) or "Rear"(DIN Rear-mount
installation, utilizing threaded screw
holes at the sides of the unit chassis).
For details, refer to the following
illustrated installation methods.
Install the unit where it does not get in
the driver ' s way and cannot injure the
passenger if there is a sudden stop,
like an emergency stop.
DASH BOARD
HEX NUT
METAL MOUNTING
STRAP
SPRING WASHER
PLAIN WASHER
TAPPING SCREW
CONSOLE
SLIDE BRACKET
HOUSING
HEX BOLT
-4-
INSTALLATION
KEY PLATE
PLASTIC FRAME
KEY PLATE
If you want to take CHASSIS out of the SLIDE BRACKET HOUSING , first remove
the PLASTIC FRAME of the both sides away, then insert the two KEY PLATES into
left and right sides of chassis as above illustration.
DETACHING CONTROL PANEL
1. Press the OPEN button to flip down the
front panel .
OPEN button
3. put it in the protective case for safe
keeping.
PROTECTIVE CASE
2. First slide the front panel a little to
the right, and pull it off towards you .
FRONT PANEL
-5-
INSTALLATION
ATTACHING CONTROL PANEL
How to clean the connectors
1. First, insert the right side of the front
panel into the main unit.
Bulge
Hollow
Frequent detachment will deteriorate
the connectors.
To minimize this possibility, periodically
wipe the connectors with a clean, soft,
dry cloth only, being careful not to
damage the connectors.
Bulge
Hollow
Connector
2. Push the right side of the front panel
until it locks firmly into the main unit, at
one time, insert the left side of the
front panel into the main unit .
3. Push it back to the position for playing
-6-
ELECTRIC CONNECTION
WIRE CONNECTION
AV IN
LCH IN WHITE
VIDEO IN YELLOW
RCH IN RED
RADIO ANTENNA JACK
REAR RCA
OUTPUT
White
Yellow
Red
Yellow
LCH WHITE
RCH RED
FRONT RCA AUDIO OUT SOCKET
FRONT RCA AUDIO OUT SOCKET
VIDEO OUTPUT SOCKET
ISO CONNECTOR
VIDEO OUTPUT SOCKET
REAR CAMERA INPUT YELLOW
SUBWOOFER GREY
KEY GROUND(BLACK)
KEY 1(BROWN)
KEY 2(WHITE)
FUSE
RED
IGNITION SWITCH(B+)
FUSE
MEMORY BACK-UP(B+)
YELLOW
GROUND(B-)
AUTO ANTENNA
FRONT
LCH SPK.
REAR
LCH SPK.
BLACK
VIOLET/WHITE
LIGHT GREEN
(B+)12V
REAR CAMERA SWITCH
(B-)PARKING BRAKE
BLUE
WHITE
GREY
WHITE/BLACK
GREY/BLACK
GREEN
GREEN/BLACK
VIOLET
VIOLET/BLACK
FRONT
RCH SPK.
REAR
RCH SPK.
Note:
the ground connection cable (parking brake B-) must be connected in order for
pictures to be played back to the monitor. If the cable has not been correctly
connected, warning message appears on the monitor.
-7-
REMOTE CONTROL
15
7
2
16
17
19
13
3
5
20
21
1
6
23
22
14
9
18
12
24
11
26
10
4
8
1. CLK Press it briefly to show the clock
time in video play mode .
25
2. SRC Press it to change between
RADIO ,DISC ,USB, SD , AUX IN and
AV IN mode.
6. LO/DX(SUBTITLE) Changing of the
SUBTITLE language on multi-subtitle
language Digital Video disc. In radio mode,
Press this button for distance reception
when you are located at weak signal
location, depress it for stronger signal.
3. STOP Press once to pause playback,
press PLAY/PAUSE to resume playback .
7. REPEAT/ Switch the Repeat mode
of DVD/VCD/CD/MP3 disc.
4. SETUP Press it to open the SETUP
menu.
8.GOTO Press this button to begin
playback at a moment in the program you
designate. Use the number buttons to
enter the data that is needed.
5.MO/ST(AUDIO) In radio mode, press it
to select STEREO or MONO mode (when
a station is weak, sometimes switching
to Mono will improve sound quality ) .
In Disc playback mode, pressing it button
opens the AUDIO setup menu for making
changes to the way te soundtrack is
reproduced .
-8-
REMOTE CONTROL
9.
/
Press
to skip to the next
track & press
to skip back one track.
19. ZOOM Press this button to active
the ZOOM function . Each press of the
zoom button changes the screen in the
sequence : 2x 3x 4x ½ 1/3 1/4 .
Use the / / / buttons to move
through the zoomed picture .
Note : during the JPEG playback, press
the ZOOM button, the “ZOOM 100%” will
appear on screen, then press the
/
button to increase/decrease in size,
use the / / /
buttons to move
through the zoomed picture .
10. SEL Press and hold to switch
between BASS,TREBLE,BALANCE,
FADE,COLOR, RIGHTNESS,
CONTRAST, TINT, REG(in radio mode),
PI(in radio mode),TA(in radio mode),
AF(in radio mode), LOUD, SWF, EQ,
TIME 12H/24H, CLOCK, BEEP,
EUR/USA FREQ, ANIMATION.
After switching on the desired mode
above, rotate VOL knob to set it.
20. ANGLE Changing of the view angle
on multi-angle Digital Video disc.
11. VOL+/VOL- Press it to adjust
volume level .
12. / / /
Use these buttons to
navigate the various menus present in
the product.
21. EQ/LOUD Press it briefly to turn to
equalization function. Press it longer to
switch the LOUDNESS function between
LOW, MIDDLE, HIGH and OFF.
13. MENU/SUB WOOFER Press to
display the root menu of the Digital Video
disc. Press and hold this button to switch
22.
/
In DISC mode, Press
to start forward
rapidly. Press
to reverse rapidly.
SWF FREQ between 80HZ, 120HZ and 160HZ .
23. ENTER Confirm the Track/Chapter
selected with the number key or selected
with the cursor buttons on TV screen.
14. BAND(OSD) In Radio mode, press
this button repeatedly to switch between
the five radio bands .
In Disc Playback modes, Press this
button to see information about the disc
currently in play.
24. 0 - 9(0/TA & 9/AF)
Use to input numerical values during
programming, with the GOTO button,
or to directly select a track to play .
In Radio mode, (when the RDS
engaged,), 0 serves as TA function,
9 serves as the AF function .
15. /MOD Press this button to turn the
unit ON , press and hold to turn the unit
OFF. Press it briefly to select a desired
work source.
16. PLAY/PAUSE (
) In DISC mode,
starting playback, stopping picture/track.
17. MUTE Press this button to turn off the
audio. Press again to restore the sound
to its prior volume level.
18. TITLE/PBC (A/PS) Display the
TITLE menu which is recorded on the
Digital Video . changing between PBC
ON and PBC OFF on the VCD disc.
In radio mode, press shortly to scan the
preset station, press longer to enter into
automatic memory storing function .
-9-
25. +10 Tens digit select button,
cooperatively used with numeric buttons.
26. RADIO PRESET Six preset memory
buttons.
REMOTE CONTROL
Preparing the Remote Control
Inserting the Battery
1.First push to inside as the direction indicated by the arrow (See 1 )And then
Remove the battery holder as the direction indicated by the arrow (See 2 ).
2.Replace the battery Set a new battery property with (+)side up as illustrated
(See 3 ).
3.Insert the battery holder. Push in the holder to the original position(See 4 ).
Using the Remote Control
Face the remote control towards the player front face IR mark (remote control signal
receiver).
Operation angle: About
30 degree in each the direction of the front of the IR mark.
Note :
The lithium cell in the battery compartment of remote control has been secured for
transport with a plastic . Before initial use please remove this plastic so that the
remote control is ready for operation .
-10-
BASIC OPERATION
Control Panel
2
7
3
8 12 13
1
16
9
10
17
11
6
5
4
14
15
Control Panel
18
19
20
Base of Control Panel
1. REL Button
3. VOL Multifunction Button
Press it to flip down the front panel ,
then you can insert a disc into the disc
compartment. You can also press the
Eject button to eject the disc.
In normal mode, this button is used to
increase or decrease the volume.
2.
4. SEL B utton
Press and hold to switch between
(POWER On/Off)/SRC Button
Press it to switch the device ON, press
and hold (approximately 2 seconds) to
switch the device OFF . During the
playback mode, you can press it to select
an input mode by pressing repeatedly
until proper one is found:
>RADIO >DISC >USB > CARD >AUX IN
>AV IN
BASS,TREBLE,BALANCE, FADE,
COLOR, RIGHTNESS, CONTRAST,
TINT, REG(in radio mode), PI
(in radio mode),TA(in radio mode),
AF(in radio mode), LOUD, SWF, EQ,
TIME 12H/24H, CLOCK, BEEP,
EUR/USA FREQ, ANIMATION.
After switching on the desired mode
above, rotate VOL knob to set it.
-11-
BASIC OPERATION
In home interface, rotate the VOL knob
or press the </> button on remote to
do selection.
In SETUP or SWC mode, press and hold
the SEL button to back to previous mode;
In SETUP mode, press setup button to
back to home interface.
The other mode, press the SEL button
to back to home interface
In RADIO mode, Go to any preset station
by pressing one of the 6preset station
(1-6) ,if one of these buttons is pressed
for more than 2 seconds, the stations
currently being listened to will be
memorized into the selected preset button.
5. BAND Button
For information about using an AUX IN
audio source, refer to AUX operation.
In Radio mode, press this button repeatedly (or the BAND button on the remote
control) to cycle through and select the
desired radio band, the designation of
the corresponding level- FM1, FM2,
FM3, AM1(MW1), AM2(MW2)- is shown
in the TFT.
9 -1 4 . PRESET STATION MEMORY
15. AUX INPUT JACK
16. TFT Display (liquid crystal display)
The operation of the TFT, refer to TFT
Monitor Adjustment .
17. USB PORT
For information about connecting a
USB device.
6.MUTE/PTY Button
Press this button to turn off the audio.
Press again to restore the volume to the
prior level. You can also disable the
MUTE function by turning the VOL +/knob.
In Radio Mode, press this button and
hold for a bout 2 seconds to select the
P TY of the grogram type (examples of
such types of program are :
NEWS, POP.....)
18. CARD SLOT
For information about connecting a
memory card device.
19 .
(EJECT) Button
In DISC playing ,Press the Open button
to flip down the front panel, then you
can press the this button to eject the disc .
20. RESET utton
7/8. >>| and |<< Buttons
In radio mode, Long pressing |<< or >>|
button can automatically search down
or up for an available station beginning
from the current frequency; Briefly
pressing |<< or >>| button can manually
search down or up for a your desired
station beginning from the current
frequency.
Press this button to return to factory
settings.
In media mode, pressing |<< or >>|
button can play previous or next track;
continuously and long pressing |<< or
>>| button can fast backwards or
forwards at the following multiple of
normal speed: x2, x4, x8, x20.
-12-
BASIC OPERATION
SETUP OPERATION
KEY BEEP : ON or OFF.
10:00 AM
Disc setup as follow:
DISC
In home mode, rotate the VOL knob to
select “
” and press SEL button or
press ENTER on remote to turn to
setting menu.
During setting ,use the VOL knob as turn
left and right and use the >>I and I<< as
turn up and down. You can also use the
directions button to do selection then
press SEL to confirm the input.
FORMAT
NTSC
TV TYPE
4:3PS
RATING
ADULT
FORMAT
This player is capable of playing discs
recorded in either PAL or NTSC formats.
Make the selection based on whether
you are connecting the unit to a PAL TV
or an NTSC TV. You can also set the unit
to AUTO (auto select). The disadvantage
to autoselect is that each time you turn
the unit on it checks to see what kind of
monitor is connected, which causes a
small delay and some flickering of the
display image which you may find
unpleasant.
TV TYPE
16:9
Setup interface 1
4:3 Letter Box
4:3 Pan Scan
Setup interface 2
ADJUSTABLE ITEMS:
GENERAL
ANIMATION
KEY BEEP
This is to select the appropriate TV
aspect (4:3 or 16:9) according to the
connected TV set.
Normal/PS (For 4:3 TV)
Played back in the PAN & SCAN style.
(If connected to wide-screen TV, the
left and right edges are cut off.)
Normal/LB (For 4:3 TV)
Played back in LETTER BOX style.
(If connected to wide-screen TV, black
bands appear at top and bottom of the
screen.)
Wide (For 16:9 TV)
Select when a wide-screen TV set is
connected.
2 MINUTE
ON
DISC
...
RADIO
...
General setup interface1
ANIMATION
In RADIO mode, you can change the
playing time of animation among of
“OFF, 10S, 30S, 1M,90S, 2M, 3M and
4M ”.
Note:
Please set the playing time of the
animation to “ 10S ” for the first, when
you turn the unit on .
-13-
BASIC OPERATION
RATING
Select to turn Parental Control on or off.
The factory default password is 0000.
(The password must be used to make
changes to the Parental Control
menu below .)
Key in “0000” and then turn to rating
then you can setting as follow:
KID SAFE -> G -> PG -> PG-13
-> PG R -> R ->NC-17 -> ADULT
AUDIO SETUP
To turn to audio quality adjustment.
audio setup interface1
RADIO
ST/MONO: To select stereo or mono.
LOCAL: To select local or distant.
REGION: To select radio frequency
as USA or EUROPE.
audio setup interface2
GENERAL
WALLPAPER
...
ABOUT
...
General setup interface2
WALLPAPER
To select wallpaper .
ABOUT
To show the version information.
TREBLE: -7 to +7
To adjust treble level .
BASS: -7 to +7
To adjust bass level .
SUBWOOFER: To adjust subwoofer
volume and frequency.
EQ: To select audio mode as follow:
USER -> JAZZ -> CLASSIC -> POP -> ROCK
LOUDNESS: To to select loudness
effect as :OFF -> LOW -> MID -> HIGH
FADER/BALANCE:
BALANCE: R 0-10 to L 0-10
clock setup interface
CLOCK SETUP
To adjust the time and time format.
Adjust sound balance between left
and right speakers .
FADE: F 0-10 to R 0-10
Adjust sound balance between front
and rear speakers .
-14-
BASIC OPERATION
VIDEO SETUP
Reset Factory Settings
RESET button is placed on the housing
and must be activated with either a
ballpoint pen or thin metal object.
Video setup interface
COLOR: -16 to 16
Adjust the color for the picture-lighter
or darker.
BRIGHTNESS: -16 to 16
Adjust if the picture is too bright or
too dark.
CONTRAST: -16 to 16
Adjust the contrast of the bright and
dark portion.
TINT: -16 to 16
Adjust the tint if the human skin color
is unnatural.
-Adjustable when “NTSC “ is selected
for “NTSC/PAL “ .
LANGUAGE
To select OSD language.
ILLUMINATION COLOR
Rotate the VOL knob to select the
backlight for all buttons.
Rotate the VOL knob till the end to
select auto icon then tap ENTER to
confirm, and the back light change
automatically.
RESET
The RESET button is to be activated for
the following reasons:
A. Initial installation of the unit when
all wiring is completed.
B. All the function buttons do not operate.
C. Error symbol on the display.
Rear View Camera
When connecting the rear view camera
the mirror image of the rear view is automatically displayed on the monitor
when you change the gear to the back
position.
(Note: additional monitor can not display
the image.)
-15-
BASIC OPERATION
RADIO OPERATION
Listening to Radio
Press the SRC repeatedly to select the
RADIO mode, the message will like
following below :
You can use the “
/ ” buttons on the
remote control to start search for a radio
station automatically .
When an FM stereo broadcast is
hard to receive
Press ST/MO button on the remote
control to select the MONO or STEREO
mode . (When Stereo mode is activated,
the ST symbol will appear . )
To tune in strong-signal FM
Station only (LO/DX function)
Selecting The Frequency Band
Repeatedly press the BAND button on
the front panel to select the band, the
message will show in turn :
FM1
FM2
FM3
Press the LOC/DX button on the remote
control to choose between the LOC and
DX mode of Local and Long-distance
traffic news . The word “LOC” or “DX”
will display in the screen .
Storing Stations In Memory
Setting Memory
AM2(MW2)
AM1(MW1)
Start Searching For a Station
Manual Search
During Radio mode, briefly press the
button on the front panel to increase
frequency by one step of channel
spacing . (Or you can press
button
on the remote control)
During Radio mode, briefly press the
button on the front panel to decrease
frequency by one step of channel
spacing . (Or you can press
button
on the remote control)
Automatic Search
During Radio mode, press and hold
(for more than 2’s ) the “
/ ” button
to start search for a radio station
automatically .
With this system, a total of 30 stations
can be stored in the memory of six
buttons. Each band stores up to six
preset stations. The stations might be
FM1, FM2, FM3, AM1(MW1), and
AM2(MW2) band.
The operation is as below :
- Store in Memory
>Select the frequency band
>Select the station
>Keep the desired memory key pressed
in until the station is heard again after
a brief interruption .
-16-
BASIC OPERATION
- Retrieve a preset station
press the 1-6 buttons briefly on the
remote control to retrieve a station
which had been stored in the memory
in advance the chose number is shown
on display .
Automatic Memory Storing &
Program Scanning
Automatic Preset Setup
In Radio Mode, press and keep (for more
than 2 ’ S) the remote of “ APS ” button
to active automatic station storage.
The radio searches within the current
frequency band, e.g. FM1, for the stronger signal level until the search cycle
has finished . The six strongest stations
are then allocated to the corresponding
storage locations .
Then the station of the first storage
location is set .
Scan Function
In Radio mode, briefly press the “APS”
button on the remote control , the radio
briefly plays all the preset stations of the
frequency band .
RDS FUNCTION
- the function REG ON prevents the
radio from switching to alternative
frequency which have a different regional
program content .
REG OFF : the program identification(PI)
of the regional program is ignored during
the search for an alternative frequency
(AF) or a program identification (PI) .
Select RDS REGIONAL to turn RDS
function on or off.
PI SET
To change between PI MUTE and
PI SOUND .
PI MUTE / PI SOUND
(only for radio operation)
I f you are in an area where two program
identifications (PI) overlap, you can
select the option PI SOUND and
PI MUTE for playback of the sound.
Alternate switching of the program
identification should be avoided .
PI SOUND :
I f switching nevertheless occurs the
sound of another station is heard for
less than one second .
PI MUTE :
the sound of another station is
suppressed .
ADJUSTABLE ITEMS:
REGION SET
To switch the REGION function
ON and OFF.
TA Traffic Announcement
(Priority For Traffic Information)
REG FUNCTION
at certain times some stations divide up
their programs into regional programs
with varying content .
REG ON : the message “REG ON” will
appears in the display for a few seconds .
Note :
- the display capacity is limited . It is
possible that in the double display
mode some segments of the display
are deleted .
In Radio mode, long press the 0/TA
button to switch the TA function ON
and OFF .
When the TA function is activated, the
TA symbol appears in the display .
During radio operation in one FM
frequency band the search for a traffic
announcement station is started
automatically (TA SEEK) .
-17-
BASIC OPERATION
If an FM station is being received which
transmits the latest traffic announcements from time to time, the TP display
lights up.
“NEW FREQUENCY “ is displayed for
one or two seconds.
PTY FUNCTION
When the TA function is switched on ,
the FM traffic automatically interrupt
CD operation (the word TRAFFIC
appears in the display).
In Radio mode, press and hold “PTY”
to select the Program type .
PTY Selection of the program type
besides the stations name, some FM
stations also transmit information on the
type of program. This information can
be displayed by your car radio .
The volume level is increased to the
minimum value for the transmission of
traffic announcements.
After the traffic announcements has
finished, the program that was
previously running is resumed.
Examples of such types of program are :
SPORT NEWS POP WEATHER ......
With PTY function you can specifically
select stations transmitting a particular
(Alternative Frequencies)
type of program. Press the PTY button
repeatedly to call up the PTY selection
In Radio mode, long press the 9/AF
menu. The message “PTY SEEK” then
button to switch AF function ON and OFF . appears briefly in the display .
When PTY has been selected the radio
AF is a function that works with the help
start searching for corresponding PTY
of RDS (Radio Data System) and can
information and stops when the PTY
only be used with FM stations. The radio information has been found, “NO PTY”
searches in the background for the best
appears in the display. If the PTY
frequency reception of the station that
information being searched for no longer
has been tuned into .
exists, the PTY function automatically
switches to normal mode .
When the AF function has been switched
on, the radio continuously tests the
signal strength of the AF frequency .
AF FUNCTION
The test interval for each AF frequency
depends on the signal strength of the
current station and varies from a few
minutes in the case of weak signals.
Whenever the new AF frequency is
stronger than the station that is currently
tuned in , the radio switched to this
frequency for a short time for a short
time and the message
-18-
MEDIA OPERATION
SELECTING PLAY MODE
3). INTRO FUNCTION
During the Disc playback, press the
“2, RDM, INT ” button on the remote
control to select the different playing
mode .
FOR CD :
longer press the 3/INT button on the
remote control to play the previous 10
seconds part of each track/chapter on
disc.
(Longer press again to cancel this mode)
INT
TOP
1
VOL
2
3
4
5
6
7
8
RDM
AF
SEL
9
FOR VCD :
longer press the 3/INT button on
the remote control, It display will
following menu as below :
SEQ PLAY
INTR O 1
1). TOP FUNCTION
ForDigital Video/ VCD/CD/MP3:
In the state of Digital Video/VCD/CD/
MP3 disc playing, press the button to
select the first track/chapter to play.
(depend on the disc used for VCD)
Note: when select INTRO 1 Mode, this
player to start to play the previous 10
seconds part of each track/chapter on
disc. (Longer press it again to cancel
this mode .)
2). REPEAT FUNCTION
FOR Digital Video/MP3 :
For Digital Video/MP3 , longer press the
INT button is not available .
FOR Digital Video :
Longer press 2 button on the remote
control to select REPEAT mode as
follows :
CHAPT ER REP EAT ON
REP EAT OFF
TI TL E REP EAT ON
REP EAT ALL
FOR VCD/CD :
Longer press 2 button on the remote
control to select REPEAT mode as
follows :
REPEAT ONE
4). RDM (RANDOM) FUNCTION
During DISC playback, longer press the
4/RDM button on the remote control to
play in random. Each playing, the order
is different .
(Depend on the disc used for VCD).
Longer press it again to cancel
this function .
REPEAT ALL
REPEAT OFF
FOR MP3 :
Longer press 2 button on the remote
control to select REPEAT mode as
follows :
REP EAT ONE
REP EAT OFF
ON-SCREEN DISPLAY FUNCTION
During playback, press the OSD button
on the remote control . It will display the
message for the playing media such as
Title Number, Chapter Number and so on.
REP EAT FO LD ER
REP EAT ALL
-19-
DIGITAL VIDEO SPECIAL FUNCTION
Digital Video Special Function
1. Multi-subtitle Language
Function (for Digital Video Only)
3. Multi-Angle Function
(for Digital Video Only)
During Digital Video playback.
press the SUBTITLE on the
remote control .
During Digital Video playback,
press the ANGLE button on the
remote control
Each time the button is pressed number
of the subtitle language changes
in sequential order.
Each time the button is pressed , the
number of the angle changes in sequential order.
Notes:
- The language number is different
according to the disc.
- Some discs only contain one subtitle
language.
- When no different subtitle language
are recorded, “ INVALID KEY ” will be
displayed at screen left top corner.
Notes:
- The angle number is different
according to the disc.
- The function only work for disc having
scenes recorded at different angles.
- When no different angle are recorded,
“ INVALID KEY ” will be displayed at
screen left top corner.
2. Multi-Audio Language Function
For Digital Video:
During Digital Video playback,
press the AUDIO on the remote
Each time the button is pressed number
changes on sequential order.
Notes:
- The language number is different
according to the disc.
- Some disc only contain one language
soundtrack
- When no different language soundtrack are recorded “ INVALID KEY ” will be
display at screen left top corner.
4. Title Menu Function
For Digital Video:
If the Digital Video has multiple titles
recorded on the disc. It can select
preferred title from the title menu to start
playback.
- During Digital Video playback, press
TITLE button on the remote .The title
menu is display.
- Select preferred title by the cursor
button and confirmed by press the
ENTER button .
For VCD:
Press TITLE/PBC button on the remote
control while the disc is playing, you can
switch between "PBC ON"and "PBC off"
mode.
For VCD/CD:
during playback, Press AUDIO on the
remote control . It is possible to switch
the sound between monaural and
stereo sound.
MONO LEFT
MONO RIGHT
STEREO
MIX-MONO
-20-
AUX/AV OPERATION
AUX OPERATION
AV Operation
On the front panel of this unit, there is an
AUX IN jack, follow the diagram below to
connect analogue replay devices(only
for the Audio connect, if you want to
connect the Video, please plug the
<Video input > on the back of the unit .) .
Use this jack to replay sound of other
replay equipment such as disc players,
computers, etc. Via the loudspeakers.
Please plug the <Video input >
on the back of the unit .
Press the SRC repeatedly to select the
AV mode, the message will like
following as below :
1). Please connect the external device
with stereo jack plug the Aux in socket .
AUX IN JACK FRONT PANEL
In AUX / AV mode, you can use SEL, +, -,
VOL, MUTE, EQ , SW and LOUD buttons
to adjust audio and video.
Ground
Right
Left
Note: To ensure safety while driving and
to comply with lows, drivers should
not watch video or operate the
video device while driving.
2). Press the SRC repeatedly to select
the AUX mode, the message will like
following as below :
3). You now hear the sound from the
external device played back through
the loudspeakers .
4). use the VOL+/- on the front panel to
adjust the volume level.
-21-
AUX/AV OPERATION
USB OPERATION
First remove the dust protection cap , then following the diagram below,
connect your device to the USB port of the unit . If it is properly connected, the
device will be mounted and start playing automatically. (All operations are as
same as disc mode .)
In USB Playback mode
You can use the UP, DOWN, RIGHT or LEFT buttons to navigate and to select
files to play, and press ENTER to begin playback (or viewing, in the case of
JPEG files).
To skip to the next or last track, press the
or
. Press the
buttons for Fast Forward or Fast Reverse playback.
or
REPEAT play modes are also available by repeatedly pushing REPEAT until
the desired mode is found.
Important Note:
1. During the DISC playback, if you want to play the USB, please first remove
USB and then connect it again to start (when the Disc and USB in this player).
2. When the DISC and USB in this player,they can not to transfer .
-22-
CARD OPERATION
Card OPERATION
The unit can support playback MP3/WMA/JPEG/MP4 format which are stored
into a memory card .
Please read below before you start the operation of memory card .
INSERTING THE CARD .
Label side
facing upward
OPEN
Press the open button
to flip down panel .
First to slide the panel a
little to the right, then pull it
off towards you.
Insert the memory card.
Press in till heard a “CLICK”.
Attached the panel to play.
REMOVING THE CARD .
OPEN
Press the open button
to flip down panel .
First to slide the panel a
little to the right, then pull it
off towards you.
Press in till heard a “CLICK”.
Remove the SD card and
attached the panel to play.
Mode change to card mode
After a memory card was inserted into the main unit card slot . the unit will starts
playing the files contained on the memory card . Once the unit read the memory card
successfully, the first file on the memory card will automatically start playback.
Press and hold the SEL button repeatedly is allowing changing to other modes .
Change DISC to Card
The operations are same as USB mode, refer to see USB operation .
Change Card to DISC
The operations are same as USB mode, refer to see USB operation .
File Playback Operation
All the memory car playback operation function is same as the operation
on CD/MP3/WMA .
Please to “ MP3/WMA” operation for more details .
-23-
MP3/MP4 OPERATION
MP3/WMA/JPEG/MPEG4 PLAY
The unit is support MP3/WMA/JPEG/MPEG4 . During playing press the MENU,
the following picture will appear on the monitor . The unit will play the first track
automatically . You can to choose others mode (MP3/JPEG /MPEG4) to play .
EX. : when the MP3 mode is selected .
5
1 Current type (highlighted bar) .
1
SONGS
2 Audio play mode select.
001
002
3 Picture play mode select.
003
004
4 Movie play mode select,
5 Current play track .
2
3
4
As the interface show, Use
/
/
/
on the remote control to select the
play mode or item, then press ENTER button on the remote control to confirm.
SKIP AHEAD / BACK
In playback mode, press the
or
button on front panel to skip ahead or
back one item in the list . (Or press the
or
button on the remote control .)
Fast Forward/ Fast Reverse Playback
In playback mode, press and hold (for a more than two seconds ) the
or
on
front panel to move to FAST FORWARD or FAST REVERSE play .
You can also briefly press the
or
button on remote control to accomplish
this .
REPEAT FUNCTION
Pressing REPEAT button repeatedly can select repeat play mode.
REP-ONE:
Play the same song over and over again.
REP ALL:
Play all songs on the disc, then repeats the entire disc over and over again .
NOTE:
in JPEG/MPEG4 mode, the details operations as same as MP3/WMA operation .
-24-
STEERING WHEEL CONTROL
Press the SRC repeatedly to select the
SWC mode, the message will like
following as below :
Then select a function icon such as
will show in button 1 position and select
to confirm and back to home menu
that means select finish.
The function of the icons as follow:
To begin function save.
After selection to confirm
operation.
To cancel the input and
resume load.
There are 2 KEY for no more than 12
buttons to select.
For first time use this function, input a
key (such as 0.38,0.38 is a magnitude
of voltage, according to your car )
through the steering remote and
show in button 1 position.
When electric resistance is too
low, select this icon to increase.
When electric resistance is too
high, select this icon to reduce.
0.38
Use the VOL knob or the </> button to
do selection.
First select Assign begin setting;
then select the input(0.38) and press
SEL or ENTER to confirm;
-25-
SPECIFICATION
Supply Voltage:
Current Consumption:
12V DC (11V-15V)
Less than10 A
Maximum Power Output:
4 x 80W
Signal System:
Discs Played:
Compositive video 1.0Vp-p 75
(1)DIGITAL VIDEO-VIDEO Disc
5"(12 cm) single-sided, single-layer
5"(12 cm) single-sided, double-layer
(2)Compact Disc (CD-DA, VIDEO CD)
5"(12cm) disc
Audio Signal Output:
Characteristics:
Front, Rear, and Subwoofer Output
(1)Frequency Response
20 Hz - 20 KHz
(2)S/N Ratio
90 dB (JIS)
(3)Wow and Flutter
Below measurable limits
RADIO Section :
Frequency Coverage:
IF:
Sensitivity (S/N = 30 dB):
Frequency Coverage:
IF:
Sensitivity (S/N = 20 dB):
For 2 Bands
(Europe)
FM
87.5 to108 MHz
10.7 MHz
15 dBu
MW
522 to1620 KHz
450 KHz
40 dBu
For 2 Bands
(U.S.A.)
FM
87.5 to107.9 MHz
10.7 MHz
15dBu
AM
530 to1710 KHz
450 KHz
40 dBu
TFT Section :
Monitor Screen Size:
Color System:
3.2 Inch Wide
NTSC/PAL
NOTE:
Specification and design are subject to modification, without notice, due to
improvements in technology.
-26-
TROUBLESHOOTING
Before going through the check list, check wiring connection. If any of the problems
persist after check list has been made, consult your nearest service dealer.
SYMPTOM
No power
CAUSE
SOLUTION
The car ignition switch is
not on
The fuse is blown
If the power supply is properly
connected to the car accessory
terminal,switch the ignition key
to "ACC"
Replace the fuse
Presence of disc inside the Remove the disc in the player,
then put a new one
player.
Disc can not be
loaded or ejected
Inserting the disc in reverse Insert the compact disc with
the label facing upward
direction
The disc is extremely dirty
or defective
Clean the disc or try to play a
new one
Temperature inside the car Cool off or until the ambient
is too high
temperature return to normal
Video/image
appears
black-white
No video/image
appears
The color system is
set incorrectly
Please switch to correct color
system from menu
The unit is not connected
to the parking brake
detection switch
Make proper connection
according to “ wire connection ”
The parking brake is not
engaged
No color in picture The disc format is not
according to the TV-set
used (PAL/NTSC)
For safety reasons no video/
images are displayed
while the vehicle is moving.
Engaging the parking brake will
cause images to be displayed.
Please the color system of
the choice accommodation
No JPEG files are recorded
Change the disc
on the disc.
JPEG files are not recorded Change the disc
Record JPEG files using a
in a compliant format
compliant application
Press the RESET button.
Unit has become
Unit has frozen up
Front
panel is not properly fixed
unresponsive
into its place
The radio does not The antenna cable is not
Insert the antenna cable firmly
connected
work
JPEG disc can
not be played
back
The signals are too weak
MADE IN CHINA
Select a station manually
BV7345
-27-
Download PDF