®
LASER DISPLAY SYSTEM
MANUAL
SEVEN STARS
®
Big Dipper Laser Science And Technology Co., Ltd
REV: 2.00
Please read this manual carefully before operating
LASER DISPLAY SYSTEM USER MANUAL
Model:K100
Notices information
1. This is 3B laser product .Avoid eyes direct exposure to the laser
light.
2. Operate abide by the user manual .Do not disassemble or repair
the system by yourself. When there is a problem, please contact
technician, or your local dealer.
3. Installation should be done by professional technician.
4. Please set the laser product far away from those things as strobe
light.
5.The system should be kept dry .please don’t exposure the
system to wet or dust-laden environment need water proof
environment in the open air
6. Do not touch the system by wet hand or pull the power cable
forcefully.
7. The work temperature is 10-40℃,so the laser conduct doesn’t
work normally until it reach the work temperature when taking it in
from cold environment .
8. Do not turn on or off the system frequently, and avoid keep it
working for long time.
9. Prevent from strong vibration or G-shock to the system.
10. Prevent other harmful objects from entering the system.
11. Keep at least 1 meter between the system and the objects in the
lighting.
Page 1
Maintenance
12. Connect the power cable after the system has been installed.
Clean the lens regularly. Do not use a wet cloth or chemicals; use a
damp cloth. The maintenance period depends of the usage
frequency and surrounding conditions of the LASER display system.
It recommended that the system should be cleaned every 15 days.
13. Before powering on the system, be sure the power cable is
connected into the power socket well.
14.
three hours, ensure that the system is able to cool down in a suitable
environment.
15.
Warning
Turn off the system for 25 minutes after running constantly for
Turn on the computer after the laser display system is on,
or you must power on the computer again.
Power off any related system before maintenance.
16. When to be transported, use the original package to avoid
Shaking.
17.
Declare
The end-user of this product should abide by the above instructions
and warnings. Performing actions which was advised not to do so as
This sign indicates separate collection for electronics and
electrical equipment.
Inspection information
stated by this manual may void the warranty of this laser display
Check that the following components are present within the package
system.
when receiving system - from the list bellow:
All products made from Big Dipper Laser Company have anti - fake
identification. please verify
the anti-counterfeit label at the bottom
of the case to ensure the interests of consumers.
1 x LASER display system
1 x User manual
1 x Power cable
1 x DMX cable
Installation
1. Be sure that there is no flammable or explosive subjects
nearby. The least clear proximity from the system should be 1.5
meters. At the same time, keep more than half a meter between
the wall and LASER display system.
2. Be sure the power socket output voltage matches that off the
LASER display system.
3. Ensure the fan and the exhaust is not blocked.
4. The LASER display system should be statically fixed.
5. It is essential to be earthed well for the sake of safety.
Page 5
Page 2
Technical Parameters
Back panel
Model
K100
Parameters
1. ON/OFF: Power Switch
2. F3AL 250V:Input power with internal fuse(3A)
3. FAN
1
LASER diode
Green
2
Power supply
AC220/110V, 50/60HZ
3
LASER power
G≥20mW
4
Scanner angle
5
6
7
DMX Channels
Control mode
Peculiarity
8
Effect
±18°
12
Sound
Simple operation, plug and play
Capable show more than 40 light beams
and patterns. Displaying laser patterns
specified by international laser display
association, such as diffusing laser
network, slowly rotating color fan, time
and space tunnel and fairy flowers etc.
9
10
Page 3
Dimensions
210*145*115 mm
Net weight/
Gross weight
1.4/1.7Kg
Page 4
Download PDF