Advertisement
Advertisement
YOUR HANDBOOK
ON THE INTERNET!
CITROËN lets you view your vehicle's documentation on line, to see earlier versions and the latest information, simply and free of charge.
Connect to
http://service.citroen.com
:
1 |
Select your language and register,
2 |
click on the link in the "Private customer access" zone to consult the vehicle documentation; a window opens providing access to all of the handbooks,
3 |
select your vehicle, choose the body type then the date of issue of the handbook,
4 |
fi nally, click on the heading of your choice.
We draw your attention to the following...
Your vehicle is fitted with only some of the equipment described in this document, depending on the trim level, version and the specifications for the country in which it is sold.
The fitting of electrical equipment or accessories which are not recommended by CITROËN may result in a failure of your vehicle's electronic system. Please note this specific warning and contact a CITROËN dealer to be shown the recommended equipment and accessories.
For any work on your vehicle, use a qualified workshop that has the technical information, competence and equipment required, which a
CITROËN dealer is able to provide.
CITROËN has a presence on every continent, a complete product range, bringing together technology and a permanent spirit of innovation, for a modern and creative approach to mobility.
We thank you and congratulate you on your choice.
At the wheel of your new vehicle, getting to know each system, each control, each setting, makes your trips, your journeys more comfortable and more enjoyable.
Happy motoring!
Contents
1. FAMILIARISATION
4-18
Presentation
Exterior
Sitting comfortably
Seeing clearly
Driving safely
Cab fittings
Rear fittings
Child safety
Ventilation
Eco-driving
13
14
14
15
10
12
4
5
16
17
2. READY TO GO
19-41
Remote control
Key
Alarm
Doors
Instrument panel
Adjusting the time
Warning lamps
Fuel gauge
Coolant
Service indicator
Lighting rheostat
Gearboxes
Gear efficiency indicator 37
Automatic gearbox 38
Steering wheel adjustment 41
Starting and stopping 41
34
35
36
37
26
27
28
34
19
20
21
22
3. EASE OF USE and
COMFORT 42-89
Lighting controls wipers
42
45
Cruise control 47
Fixed speed limiter
Speed limiter
49
50
Manual heating/air conditioning automatic
De-icing and demisting
Rear ventilation
Additional heating
Seats
2-seat front bench
Rear seats
53
55
59
61
62
65
67
69
Seat and bench configuration 76
Cab fittings
Courtesy lights
77
80
Toll cards/car park tickets
Seating area fittings
Rear suspension
Mirrors
Electric windows
81
81
84
87
89
4. SAFETY
90-108
Parking brake
Hazard warning lamps
Parking sensors
Horn
Anti-lock braking system
(ABS)
Emergency braking assistance
92
92
Traction control (ASR) and stability control (ESP) 93
90
90
91
92
Seat belts
Airbags
Lateral airbags
Front airbags
Deactivating the passenger's airbag
Child seats
ISOFIX seats
Recommended seats
94
97
99
100
100
101
103
106
Contents
5. ACCESSORIES
109-111
Towing a trailer
Other accessories
109
111
7. QUICK HELP
123-142
Battery
Puncture repair kit
Changing a wheel
Removable snow screen
123
124
126
130
Changing a bulb a fuse
131
136 a windscreen wiper blade 140
Towing the vehicle 141
9. TECHNOLOGY on
BOARD
Emergency or assistance
NaviDrive
9.1
9.3
MyWay 9.49
Audio system 9.83
The "Technology on board" section presents the new radio/navigation systems.
10. VISUAL
SEARCH 151-157
Exterior 151
Instruments and controls 152
Interior 154
Technical data -
Maintenance
Model code
155
156
The "Location" section assists you in finding the controls and functions and their associated page numbers on the schematic outlines of the vehicle
(visual index).
6. CHECKS
112-122
Opening the bonnet 112
Diesel engines 113
Petrol engine 114
Levels 115
Checks 117
Fuel 120
Circuit disarmed
Diesel repriming pump
121
121
8. TECHNICAL DATA
143-150
Dimensions
Weights
Engines
Identification features
144
148
149
150
PRESENTATION
This handbook is designed to familiarise you with the new vehicle from the moment you get behind the wheel and to describe the operating features.
Reading the handbook is made easy by a content consisting of
10 identified chapters which can be located by means of a colour code specific to each one. Its sections cover, by theme, all of the functions of the vehicle in its most complete specification.
Chapter 8 indicates all of the technical data relating to your vehicle. At the end of the document, diagrams of the outside and inside of the vehicle will assist you in locating equipment or functions and page numbers refer you to the relevant section of the handbook.
Within the chapters symbols draw your attention to specific information:
directs you to the chapter and section which contains detailed information concerning a function,
indicates important information relating to use of the equipment,
alerts you to the safety of individuals and equipment on board.
Key - Remote control
Complete locking of the vehicle, cab and rear doors.
Complete unlocking of the vehicle, cab and rear doors.
2a
8
2b
Exterior
2a
19
Sliding side door
Pull the handle towards you then towards the rear and open the door guiding the rearward sliding until the point of resistance has been passed.
If fitted on your vehicle, do not open the left-hand side door while filling with fuel as this could damage the fuel filler flap.
Door open warning lamp
If this comes on, a door has not been closed correctly.
Usable dimensions
2b
23-24
8
Key
: chapter identification
: page identification
144
1
Exterior
Side-hinged rear doors
This control permits opening to approximately 180°.
2
Rear suspension
Two functions:
- Automatic height correction.
- Manual height correction.
3a
2
25
3b
7
Repairing a wheel
Parking sensors
In bad weather or in winter, check that the sensors are not covered with mud, ice or snow.
Changing a wheel
7 124
3a
84
3b
91
7
126
Exterior
Opening the bonnet
Lift the cover at the foot of the left-hand seat and pull the release lever upwards.
Partially open the bonnet, lift the safety catch and raise the bonnet.
Secure the stay in one of the two notches, according to the height required, to hold the bonnet open.
6 112
Towing eye
At the front, unclip the cover by pressing it at the bottom.
At the rear, unclip the cover using a coin or the flat part of the towing eye.
7 141
Diesel engines Petrol engine
Take care when working under the bonnet.
Refer to "Levels" in section 6 for advice on use of the fluids.
6
113
6
114 1
Interior
INSTRUMENTS AND CONTROLS
1.
Lights and direction indicator control stalk.
2.
Instrument panel with screen.
3.
Wipers, screenwash, trip computer control stalk.
4.
Gear
5.
Ignition.
6.
Audio system controls.
7.
Driver's airbag, horn.
8.
Steering wheel height and reach adjustment.
9.
Headlamp beam adjustment.
10.
Cruise control, speed limiter switches.
11.
12 volt accessory socket (120 W max) of the cigarette lighter type.
12.
Ashtray.
13.
Glove box, auxiliary socket, passenger's airbag deactivation switch.
ADJUSTING THE TIME
Depending on the configuration of your vehicle, you have either:
- a centre console with screen: refer to
"Adjusting the date and time" in section 9,
- a centre console without screen: refer to
"Instruments and controls" in section 2.
Interior
CENTRE CONSOLE AND OVERHEAD STORAGE UNIT
1.
Location of controls:
- electric child lock,
2.
Heating and/or air conditioning controls.
3.
Location of the ticket/card storage or controls:
- deactivation of ESP,
- deactivation of the interior protection alarm, alarm LED,
- deactivation of the parking sensors.
4.
Storage
5.
Audio equipment or storage compartment.
6.
Central adjustable vents.
7.
Hazard warning lamps switch.
8.
Screen or storage compartment.
9.
Courtesy
10.
Passenger's airbag deactivated warning lamp.
11.
Location of the ticket/card storage, rear ventilation deactivation switch, heated seat controls.
1
Interior
SITTING COMFORTABLY
Driver's seat
1.
Forwards-backwards
2.
Backrest
3.
Cushion
4.
Lumbar.
5.
Head restraint height.
3 65
Steering wheel
Adjust the height and reach of the steering wheel.
2 41
Mirrors
Manual adjustments.
Interior
Electric windows
3 89
Seat belts
Height adjustment.
Fastening.
4 94
Electric adjustments, electric folding/ unfolding.
3 87
1
Interior
SEEING CLEARLY
Lighting control stalk
Lighting off.
Wiper control stalk
Sidelamps.
Main beam headlamps (blue).
Dipped beam headlamps (green).
AUTO, automatic illumination of headlamps.
2 fast.
1 normal.
I intermittent.
0 off.
È single wipe.
AUTO , press the stalk down.
3 45
3
42
Changing bulbs
In bad weather or in winter, check that the lamps are not covered with mud or snow.
7 131
Interior
DRIVING SAFELY
NaviDrive
This audio system incorporates a hard disk with a capacity of 10 Gb, reserved for your music.
The Jukebox function permits the selective playing of up to 10 hours of music. The detailed map of Europe is stored on this hard disk, without the addition of a CD. It is displayed on the 16/9 7" colour screen and offers a 3D view.
Via your SIM card, the GSM hands-free telephone also provides access to the
CITROËN emergency call centre (subject to conditions).
9
Emergency or assistance call with
NaviDrive
This system allows an emergency or assistance call to be sent to the dedicated
CITROËN centre.
For more information on the use of this system, refer to section 9, "Technology on board".
Audio system
9
MyWay
This easy to use audio system offers a map of Europe on SD Card, a Bluetooth telephone connection and the playing of
MP3/WMA files.
9
USB Player
CITROËN recommends the use of a connection lead to connect your portable player to the USB.
In the right-hand drive configuration, the lead is essential.
9
Cruise control
The vehicle speed must be higher than
25 mph (40 km/h) with at least 4th gear engaged.
3 47
Fixed speed limiter
3 49
Speed limiter
The lowest speed which can be programmed is 20 mph (30 km/h).
3 50
1
Interior
CAB FITTINGS
Overhead storage unit
3 79
REAR FITTINGS
Rear seats
3 69
Glove box
3 77
Storage compartment
3 77
Seating area fittings
3 81
Interior
CHILD SAFETY
Seat configurations
3 76
Electric child lock
2 24
Child surveillance mirror
3 88
Rear windows
3 88
Safety anti-pinch
3 89
Child seats
4 101
1
Interior
VENTILATION
Manual controls
Recommended settings
For optimum use of the system, we recommend:
If I require...
Air distribution
Temperature Air flow
Air recirculation
Heating
AC
-
3 53
Cooling
Demisting
Defrosting
Automatic controls, with separate driver and passenger settings
3 55
At the rear
3 61
ECO-DRIVING
Eco-driving is a range of everyday practices that allow the motorist to optimise their fuel consumption and CO
2
emissions.
Optimise the use of your gearbox
Drive smoothly
With a manual gearbox, move off gently, change up without waiting and drive by changing up quite soon. If your vehicle has the system, the gear efficiency indicator invites you to change up; it is displayed in the instrument panel, follow its instructions.
Maintain a safe distance between vehicles, use engine braking rather than the brake pedal, and press the accelerator progressively. These practices contribute towards a reduction in fuel consumption and
CO
2
emissions and also helps reduce the background traffic noise.
Remember to make use of equipment that can help keep the temperature in the passenger compartment down (sun roof and window blinds...).
Switch off the air conditioning, unless it has automatic digital regulation, as soon as the desired temperature is attained.
Switch off the demisting and defrosting controls, if not automatic.
Switch off the heated seat as soon as possible.
With an automatic or electronic gearbox, stay in Drive "D" or Auto "A" , according to the type of gearbox, without pressing the accelerator pedal heavily or suddenly.
If your vehicle has cruise control, make use of the system at speeds above 25 mph
(40 km/h) when the traffic is flowing well.
Control the use of your electrical equipment
Switch off the headlamps and front foglamps when the level of light does not require their use.
Avoid running the engine before moving off, particularly in winter; your vehicle will warm up much faster while driving.
Before moving off, if the passenger compartment is too warm, ventilate it by opening the windows and air vents before using the air conditioning.
Above 30 mph (50 km/h), close the windows and leave the air vents open.
As a passenger, if you avoid connecting your multimedia devices (film, music, video game...), you will contribute towards limiting the consumption of electrical energy, and so of fuel.
Disconnect your portable devices before leaving the vehicle.
1
Limit the causes of excess consumption
Spread loads throughout the vehicle; place the heaviest items in the bottom of the boot, as close as possible to the rear seats.
Limit the loads carried in the vehicle and reduce wind resistance (roof bars, roof rack, bicycle carrier, trailer...). Use a roof box in preference.
Remove roof bars and roof racks after use.
Observe the recommendations on maintenance
Check the tyre pressures regularly, when cold, referring to the label in the door aperture, driver's side.
Carry out this check in particular:
- before a long journey,
- at each change of season,
- after a long period out of use.
Don't forget the spare wheel and the tyres on any trailer or caravan.
When refuelling, do not continue after the 3 rd cut-off of the nozzle to avoid any overflow.
At the wheel of your new vehicle, it is only after the first 1 800 miles
(3 000 kilometres) that you will see the fuel consumption settle down to a consistent average.
At the end of winter, remove snow tyres and refit your summer tyres.
Have your vehicle serviced regularly
(engine oil, oil filter, air filter...) and observe the schedule of operations recommended by the manufacturer.
Central locking
Press this button to lock your vehicle, cab and rear doors.
The direction indicators flash once and the exterior mirrors fold.
If one of the doors is open or is not closed correctly, the central locking will not work.
Access
Folding/unfolding the key
Press this button to release the key from its housing.
To fold the key, press the chromed button then fold the key into the housing. If you do not press the button, the mechanism may be damaged.
ACCESS
REMOTE CONTROL
Central unlocking
Press this button to unlock your vehicle, cab and rear doors.
The direction indicators flash twice and the exterior mirrors unfold (unless folding was selected using the interior control, refer to the "Mirrors and windows" section of chapter 3).
Deadlocking
If your vehicle is fitted with deadlocking, a second press on the closed padlock on the remote control within five seconds after locking changes the locking to deadlocking.
This is confirmed by fixed lighting of the direction indicators for approximately two seconds.
Deadlocking renders the exterior and interior door opening handles inoperative: do not leave anyone inside the vehicle when it is deadlocked.
If deadlocking is activated from inside the vehicle, it will change to normal locking when the vehicle is started.
Good practice
Take care not to allow the remote control to come into contact with grease, dust, rain or a damp environment.
A heavy object attached to the key
(keyring, ...) weighing on the shaft of the key in the switch, may cause a malfunction.
2
Access
Switch on the ignition.
Press the locking padlock for at least five seconds within the next ten seconds.
Switch off the ignition.
Wait at least one minute before using the remote control.
The remote control is now working again.
KEY
This locks and unlocks the doors on the vehicle, opens and closes the fuel filler cap, as well as starting and stopping the engine.
REMOTE CONTROL
Changing the battery
Battery ref.: CR1620/3 volts.
The information "battery flat" is given by an audible signal, accompanied by a message on the display.
To replace the battery, unclip the casing using a coin at the ring.
If the remote control does not work after the battery has been changed, re-programme the remote control.
There is a risk of damage if the replacement battery does not conform.
Use only identical batteries or batteries of an equivalent type to those recommended by CITROËN dealers.
Do not discard the remote control batteries, they contain metals which are harmful to the environment.
Deposit them at a CITROËN dealership, or at any other approved collection point.
Programming the remote control
Following changing of the remote control battery or disconnection of the vehicle battery, the remote control may have to be reprogrammed.
Wait at least one minute before using the remote control.
Insert the key in the ignition switch with the buttons
(padlocks) of the remote control facing you.
ELECTRONIC IMMOBILISER
All of the keys contain an electronic immobiliser device.
This device locks the engine supply system.
It is activated automatically when the key is removed from the ignition.
After the ignition is switched on, a dialogue is established between the key and the electronic immobiliser system.
The metal part of the key must be unfolded correctly for correct dialogue to take place.
If you lose your keys
Visit a CITROËN dealer with the vehicle's V5 registration document and your identification document.
A CITROËN dealer will be able to retrieve the key code and the transponder code so that a replacement key can be ordered.
Good practice
Do not make any modifications to the electronic immobiliser system.
Operating the remote control, even when it is in your pocket, may result in involuntary unlocking of the doors.
The simultaneous use of other high frequency equipment (mobile telephones, domestic alarms…), may interfere with the operation of the remote control temporarily.
The remote control does not operate while the key is in the ignition, even if the ignition is off.
As a safety precaution (with children on board), remove the key from the ignition when leaving the vehicle, even for a short time.
When purchasing a second-hand vehicle:
- have the keys memorised by a
CITROËN dealer to ensure that the keys in your possession are the only ones which can start the vehicle.
ALARM
If fitted on your vehicle, this provides two types of protection:
- exterior protection: it sounds if a front/ rear door or the bonnet is opened.
- interior protection: it sounds if the volume inside the passenger compartment changes (breaking of a window or a movement inside the vehicle).
Locking the vehicle with complete alarm
Setting the alarm
- Switch off the ignition and get out of the vehicle.
- Set the alarm within five minutes of getting out of the vehicle, by locking or deadlocking using the remote control.
The red LED, located on the centre console, flashes once per second.
Access
Disarming
- Unlock the vehicle with the remote control or switch on the ignition, the red
LED goes off.
Locking the vehicle with exterior protection only
If, while you are away from the vehicle, you wish to leave a window partially open or a pet inside the vehicle, you should choose exterior protection only.
- Switch off the ignition.
- In the next ten seconds, press this button, located on the centre console, until the red
LED is on continuously.
- Get out of the vehicle.
- Within the next five minutes, set the alarm by locking or deadlocking using the remote control (the red LED flashes once a second).
2
Access
Triggering
The siren sounds, the direction indicators flash for approximately 30 seconds and the red LED flashes rapidly.
- To switch it off, insert the key and switch on the ignition.
When the alarm has been triggered ten times in succession (when triggered for the eleventh time) it is deactivated. Repeat the rules for setting the alarm.
Malfunction
When the ignition is switched on, if the red LED remains on for ten seconds, this indicates a fault with the siren connection.
Have the system checked by a CITROËN dealer or a qualified workshop.
Locking the vehicle without alarm
- Insert the key in the lock on the driver's door and lock it.
Do not set the alarm when washing your vehicle.
Failure of the remote control
When the alarm is set but the remote control does not operate:
- Unlock the doors with the key and open the door. The alarm is triggered.
- Switch on the ignition in the next ten seconds. The alarm is disarmed.
Automatic setting of the alarm
Depending on the country in which the vehicle is sold, the alarm is set automatically approximately 2 minutes after the last door is closed.
To prevent triggering of the alarm when a door is opened, it is imperative to press the remote control unlocking button again.
Do not make any modifications to the alarm system as this could cause faults.
From the outside
Use the remote control to lock/unlock the vehicle.
Insert the metal part of the key in the lock on the driver's side if the remote control does not work.
From the inside
The first press permits central locking of the vehicle.
A second press permits central unlocking of the vehicle.
The control does not work if the vehicle has been locked using the remote control or the key, from the outside.
Access
The doors can still be opened from the inside.
The indicator light on the control:
- flashes if the accesses are locked when stationary with the engine off,
- comes on if the accesses are locked and from the time the ignition is switched on.
Protection against attack
The system automatically locks all of the doors when you reach approximately 6 mph (10 km/h).
Activation/deactivation of the function
With the ignition on, a long press on this button activates or deactivates the function.
Opening warning light
If this warning light comes on, check that the cab doors and the rear or side doors are closed correctly.
SLIDING SIDE DOOR
If fitted on your vehicle, do not open the left-hand side door while filling with fuel as you risk damaging the fuel filler flap.
You can lock this door using the child lock.
Take care not to block the guide space on the floor to allow the door to slide correctly.
2
Access
From the outside
Pull the handle towards you then towards the rear.
From the inside
To unlock and open, push the handle towards the rear. Ensure that the door opens fully to lock the device at the base of the door.
Locking/electric child lock
This prevents opening of the side doors from the inside.
With the ignition on, press this button, the diode is lit accompanied by a message on the display.
This system is independent of the central locking control.
Good practice
Do not drive with the sliding side door open.
Always remove the key from the ignition when leaving the vehicle, even for a short time.
Each time you switch on the ignition, check whether the child lock is active (diode lit).
In the event of a serious impact, the electric child lock is deactivated automatically.
Operation in the event of a battery failure
Front and side passenger doors
In the event of a malfunction of the battery or of the central locking, use the lock to lock the doors mechanically.
- To open the door and get out of the vehicle, pull the interior control.
- To lock the door, insert the key in the lock, located on the edge of the door, then turn it one eighth of a turn .
Driver's door
- Insert the key in the lock, then turn it to the right to lock or to the left to unlock.
Access
HINGED REAR DOORS
From the outside
The two hinged doors open to 90°.
To open, pull the handle towards you then pull the lever to open the left-hand door.
To close, start with the left-hand door then close the right-hand door.
Opening to 180°
A retractable check strap system permits extension of the opening from 90° to 180°.
Disengage the check strap towards you when the door is partially open.
The check strap will re-attach automatically on closing.
When parked with the rear doors open to 90°, the doors mask the rear lights.
To signal your position to road users travelling in the same direction who may not have noticed that you have stopped, use a warning triangle or any other device stipulated by the legislation and regulations of your country.
TAILGATE
From the outside
If fitted on your vehicle, locking/unlocking is via the remote control.
To open, press the control then raise the tailgate.
A strap is provided to secure the tailgate in the upper position.
From inside
Emergency control
In the event of a central unlocking operating fault, this permits unlocking of the tailgate from the inside.
Fold the rear seats to gain access to the lock.
Insert a small screwdriver in this opening to unlock the tailgate.
2
Instruments and controls
INSTRUMENTS AND CONTROLS
INSTRUMENT PANEL
1.
Distance recorder in miles/kilometres.
2.
Screen.
3.
Fuel level, coolant temperature.
4.
Rev
5.
Instrument panel lighting dimmer.
6.
Trip distance recorder/service indicator zero reset.
Instrument panel screen
- Speed limiter/cruise control.
- Service indicator, engine oil level indicator, total miles/kilometres.
- Presence of water in the Diesel filter.
- Gear efficiency indicator.
Warning lamp and controls in the overhead storage unit
- Passenger airbag deactivated warning lamp.
- Driver/passenger heated seat controls
(version with 2 front seats).
- Rear ventilation activation/deactivation control.
Instruments and controls
Instrument panel without display
ADJUSTING THE TIME
Centre console without display
To adjust the time of the clock on the instrument panel, use the left-hand button on the instrument panel then carry out the operations in the following order:
- turn to the left: the minutes flash,
- turn to the right to increase the minutes
(hold the button to the right for rapid scrolling),
- turn to the left: the hours flash,
- turn to the right to increase the hours
(hold the button to the right for rapid scrolling),
- turn to the left: 24H or 12H is displayed,
- turn to the right to select 24H or 12H,
- turn to the left to complete the time adjustment.
After approximately 30 seconds without any action, the display returns to the normal display.
Centre console with display
The display - time sequence is linked according to model
(version). The access to the Date is only active when the model version offers a date in words.
To adjust the time indicated on the display, refer to the "Adjusting the date and time" section of chapter 9.
2
Instruments and controls
WARNING LAMPS
Each time the engine is started: a series of warning lamps comes on applying a check auto-test. They go off again almost immediately.
When the engine is running: the warning lamp becomes a warning if it remains on continuously or flashes. This initial warning may be accompanied by an audible signal and a message in the screen.
Do not ignore these warnings
Warning lamp is indicates Solution - action
STOP
on, associated with another warning lamp and accompanied by a message in the screen.
major faults linked with the
"Brake fluid level", "Engine oil pressure and temperature",
"Coolant temperature",
"Electronic brake force distribution" and "Power steering" warning lamps.
on.
parking brake applied or not released correctly.
You must stop as soon as it is safe to do so, park, switch off the ignition and call a CITROËN dealer or a qualified workshop.
Releasing the parking brake switches off the warning lamp.
Top up using a fluid recommended by CITROËN.
Parking brake/
Brake fluid level/EBFD
remains on, even though the level is correct and associated with the
ABS warning lamp.
failure of the electronic brake force distribution.
You must stop as soon as it is safe to do so, park, switch off the ignition and call a CITROËN dealer or a qualified workshop.
on while driving.
insufficient pressure or temperature too high.
Park, switch off the ignition and allow to cool. Visually check the level. Chapter 6, "Levels" section.
Engine oil pressure and temperature remains on, even though the level is correct.
major fault. Call a CITROËN dealer or a qualified workshop.
Warning lamp
Coolant temperature and level
Service is
on with needle in the red zone.
on temporarily.
remains on. indicates
abnormal increase in temperature.
minor faults or warnings.
major faults.
Instruments and controls
Solution-action
Park and switch off the ignition then allow to cool.
Visually check the level.
Chapter 6, "Levels" section. Contact a CITROËN dealer or a qualified workshop.
Consult the warnings log in the display or on the screen.
See chapter 9, "Trip computer" section then
"Warnings log".
Depending on the seriousness of the fault, contact a
CITROËN dealer or a qualified workshop.
lit then flashing.
the driver or a front passenger has not fastened his seat belt.
Row 1 seat belt not fastened accompanied by an audible signal then remains on.
the vehicle is moving with the driver or front passenger seat belt not fastened.
Pull the strap then insert the tongue in the buckle.
Check that the seat belt is fastened by pulling the strap.
Chapter 4, "Seat belts" section.
The driver must ensure that all passengers have fastened their seat belt and use it correctly.
2
Instruments and controls
Warning lamp is
Front/lateral/ curtain airbag
flashing or remains on. indicates
failure of an airbag.
Solution-action
Have the system checked by a CITROËN dealer or a qualified workshop without delay. Chapter 4, "Airbags" section.
Front passenger airbag deactivated
on.
intentional deactivation of this airbag in the presence of a rearwards facing child seat.
Chapter 4, "Airbags-children on board" section.
Low fuel level
on with gauge needle in the red zone.
that when it first comes on approximately 8 litres of fuel remain.
remains on each time the ignition is switched on.
not enough fuel added.
flashing.
fuel supply cut off following a serious impact.
EOBD emission control system
flashing or remains on.
malfunction of the system.
It is essential to fill the tank to avoid running out of fuel.
Never continue to drive until you run out of fuel, this could damage the emissions control and injection systems.
Tank capacity: approximately 80 litres
Restore the supply. Chapter 6, "Fuel" section.
Have the system checked by a CITROËN dealer or a qualified workshop as soon as possible.
Battery charge
flashing.
remaining on, in spite of the checks.
placing of the active functions on standby (economy mode).
faulty circuit, injection or ignition malfunction.
Check the battery terminals, … Chapter 7, "Battery" section.
Chapter 7, "Battery" section.
Contact a CITROËN dealer or a qualified workshop.
Instruments and controls
Warning lamp
Power steering
Opening detection is
on.
on and accompanied by a message in the screen. indicates
door not closed correctly.
Rear suspension with pneumatic height correction
flashing.
on when starting or while driving.
abnormal difference between the detected sill height and the optimum sill height.
malfunction of the pneumatic height correction.
Solution-action
The vehicle retains conventional steering without assistance. Have the system checked by a CITROËN dealer or a qualified workshop.
Check that the cab doors, the rear and side doors and the bonnet are closed (if your vehicle is fitted with an alarm).
In automatic correction mode: drive slowly (approximately
6 mph (10 km/h)) until the warning lamp goes off.
In manual correction mode: return the sill which is still at the upper or lower limit to an optimum height. Chapter 3, "Rear suspension" section.
You must stop as soon as it is safe to do so. Contact a CITROËN dealer or a qualified workshop.
ABS
ESP
ABS
ESP
remains on.
malfunction of the anti-lock braking system.
remains on.
remaining on with the LED in the button (on the dashboard) on.
system malfunction. E.g.: under-inflation of the tyres.
deactivation of the system at the request of the driver.
The vehicle retains conventional braking without assistance but you are advised to stop. Contact a CITROËN dealer or a qualified workshop.
The system optimises drive and permits improvement of the directional stability of the vehicle. Chapter 4,
"Driving safety" section.
E.g. Check the pressure of the tyres. Have them checked by a CITROËN dealer or a qualified workshop.
Operation of the system is deactivated.
Reactivation is automatic above 30 mph (50 km/h) or after pressing the button (on the dashboard).
2
Instruments and controls
Warning lamp is
Brake pads indicates Solution-action
Have the pads replaced by a CITROËN dealer or a qualified workshop.
Dipped beam headlamps/
Daytime running lamps on.
manual selection or automatic lighting.
lighting of the dipped beam headlamps from the time the ignition is switched on - daytime running lamps.
Turn the lighting stalk to the second position.
Depending on the country in which the vehicle is sold.
Chapter 3, "Steering mounted controls" section.
pulling the stalk towards you. Pull the stalk to return to dipped beam headlamps.
Main beam headlamps
Direction indicators
flashing with audible signal.
change of direction via the lighting stalk, to the left of the steering wheel.
To the Right: control to be pushed upwards.
To the Left: control to be pushed downwards.
Front foglamps on.
The foglamps only operate if the sidelamps or dipped beam headlamps are on.
Rear foglamps
Particle emission filter
on.
on.
The foglamps only operate if the sidelamps or dipped beam headlamps are on. In conditions of normal visibility, take care to switch them off to avoid any penalty. "This light is a dazzling red."
a malfunction of the particle emissions filter (Diesel additive level, risk of clogging, ...).
Have the filter checked by a CITROËN dealer or a qualified workshop. Chapter 6, "Checks" section.
Screen is indicates
Cruise control on.
Instruments and controls
Solution-action
Manual selection. Chapter 3, "Steering mounted controls" section.
Speed limiter
Gear efficiency indicat or
on.
a recommendation that is independent of the traffic configuration and density.
Manual selection. Chapter 3, "Steering mounted controls" section.
to reduce fuel consumption, change up on a manual gearbox.
The driver retains responsibility for following this indication or not.
Wait until the warning lamp goes off before operating the starter.
Diesel pre-heating
on.
climatic conditions requiring pre-heating.
Particle emissions filter
Presence of water in the
Diesel filter
on.
a malfunction of the particle emissions filter (Diesel additive level, risk of clogging, ...).
Have the filter checked by a CITROËN dealer or a qualified workshop.
Chapter 6, "Checks" section.
on and accompanied by a message in the screen.
water in the Diesel filter.
Have the filter bled by a CITROËN dealer or a qualified workshop without delay.
Chapter 6, "Checks" section.
Service spanner on.
Refer to the list of checks in the servicing booklet. Have the service carried out by a CITROËN dealer or a qualified workshop.
Time
Use the left-hand button on the instrument panel. Chapter 2, at the beginning of the "Instruments and controls" section.
2
Instruments and controls
FUEL GAUGE
The fuel level is tested each time the key is turned to the "running" position.
The gauge is positioned on:
- 1: the fuel tank is full, approximately
80 litres.
- 0: the reserve is now being used, the warning light comes on continuously.
COOLANT TEMPERATURE
The needle is positioned before the red zone: normal operation.
In arduous conditions of use or hot climatic conditions, the needle may move close to the red graduations.
The reserve when the warning first comes on is approximately 8 litres.
Refer to the "Fuel" section of chapter 6.
What you should do if the needle enters the red zone:
Reduce your speed or let the engine run at idle.
What you should do if the warning lamp comes on:
- stop immediately, switch off the ignition.
The fan may continue to operate for a certain time up to approximately
10 minutes,
- wait for the engine to cool down in order to check the coolant level and top it up if necessary.
As the cooling system is pressurised, follow this advice in order to avoid any risk of scalding:
- wait at least one hour after switching off the engine before carrying out any work,
- unscrew the cap by 1/4 turn to allow the pressure to drop,
- when the pressure has dropped, check the level on the expansion bottle,
- if necessary, remove the cap to top up.
If the needle remains in the red zone, have the system checked by a CITROËN dealer or a qualified workshop.
Refer to the "Levels" section of chapter 6.
EMISSIONS CONTROLS
EOBD (European On Board
Diagnosis) is a diagnostics system which complies with, among others, the standards concerning authorised emissions of:
- CO (carbon monoxide),
- HC (unburnt hydrocarbons),
- NOx (nitrous oxides) or particles, detected by oxygen sensors placed upstream and downstream of the catalytic converters.
The driver is warned of any malfunction of this emission control system by the illumination of this specific warning lamp in the instrument panel.
There is a risk of damage to the catalytic converter. Have it checked by a CITROËN dealer or a qualified workshop.
SERVICE INDICATOR
This programmes service intervals according to the use of the vehicle.
Operation
A few moments after the ignition has been switched on, the spanner indicating a service operation comes on; the display for the total distance recorder gives (in round figures) the distance remaining before the next service.
The points at which a service is due are calculated from the last indicator zero reset.
The point at which a service is due is determined by two parameters:
- the distance travelled,
- the time which has elapsed since the last service.
The distance remaining before the next service may be weighted by the time factor, depending on the type of driving.
More than 1 000 miles/km before the next service is due
Example: 4 800 miles/km remain before the next service is due. When the ignition is switched on and for a few seconds, the screen shows:
A few seconds after the ignition is switched on, the oil level is displayed, then the total distance recorder resumes normal operation showing the total and trip distances.
Instruments and controls
Less than 1 000 miles/km before the next service is due
Each time the ignition is switched on and for a few seconds, the spanner flashes and the number of miles/kilometres remaining is displayed:
A few seconds after the ignition is switched on, the oil level is displayed, then the total distance recorder resumes normal operation and the spanner remains on. This indicates that a service should be carried out shortly.
Service overdue
Each time the ignition is switched on and for a few seconds, the spanner flashes and the excess distance is displayed.
With the engine running the spanner remains on until the service has been carried out.
First of the two terms reached: the spanner also comes on if the two-year interval has elapsed. 2
-
Instruments and controls
Zero re-set
Your CITROËN dealer or a qualified workshop carries out this operation after each service.
However, if you carry out the service yourself, the re-set procedure is as follows:
- press and hold the trip recorder reset
- switch off the ignition, button, switch on the ignition.
The display begins a countdown.
When the display shows "=0" , release the button; the spanner disappears.
Oil level correct
Lack of oil
Flashing of "OIL" , linked with the service warning light, accompanied by an audible signal and a message on the display, indicates a lack of oil which could damage the engine.
If the lack of oil is confirmed by a check using the dipstick, it is essential that the level is topped up.
After this operation, if you wish to disconnect the battery, lock the vehicle and wait for at least five minutes, otherwise the zero re-set will not be registered.
Oil level gauge fault
Flashing of "OIL --" indicates a malfunction of the engine oil level gauge. Contact a
CITROËN dealer or a qualified workshop.
Engine oil level indicator
When the ignition is switched on, the engine oil level is indicated for a few seconds, after the service information.
The level read will only be correct if the vehicle is on level ground and the engine has been off for more than
30 minutes.
Dipstick
A = maximum, never exceed this level as a surplus of oil may damage the engine.
Contact a CITROËN dealer or a qualified workshop without delay.
B = minimum, top up the level via the oil filler cap, using the grade of oil suited to your engine.
Trip recorder zero reset button
With the ignition on, press the button until the zeros appear.
Lighting rheostat
With the lights on, press the button to vary the intensity of the lighting of the instruments and controls. When the lighting reaches the minimum (or maximum) setting, release the button then press it again to increase (or reduce) the brightness.
As soon as the lighting is of the required brightness, release the button.
Gearboxes and steering wheel
GEAR EFFICIENCY INDICATOR
5-speed gearbox
GEARBOXES AND STEERING WHEEL
To change gear easily, always press the clutch pedal fully.
To prevent the mat from becoming caught under the pedal:
- ensure that the mat is positioned correctly,
- never fit one mat on top of another.
When driving, avoid leaving your hand on the gear knob as the force exerted, even if slight, may wear the internal components of the gearbox over time.
Reverse gear
6-speed gearbox
In the 6-speed configuration, raise the collar under the gear knob to engage reverse gear.
Never engage reverse gear before the vehicle is completely stationary.
The lever should be moved slowly to reduce the noise on engaging reverse gear.
In order to drive as fuel ef fi ciently as possible with a manual gearbox, this indicator lamp indicates to the driver to change up.
The driver remains responsible for deciding whether or not to follow this indication, since the indicator lamp comes on without taking into account the configuration of the road, the amount of traffic and safety factors.
The lighting of this indicator lamp cannot be deactivated.
When reverse gear is engaged and when changing down whilst decelerating, the function is disabled.
2
Gearboxes and steering wheel
AUTOMATIC GEARBOX
Selecting positions
- Move the lever select a position.
Once the position is selected, the corresponding indicator light appears on the instrument panel display.
Park: position of the lever for parking.
To immobilise the vehicle or start the engine.
Reverse: position of the lever for reverse gear.
To reverse the vehicle.
Neutral: position of the lever for neutral.
To park the vehicle (parking brake on) and start the engine.
Drive: position of the lever for driving.
To move the vehicle forwards in automatic mode.
Manual: selection of the gears by pushing or pulling the gear lever
(+ or -).
To move the vehicle forwards in manual mode.
Moving off
With the engine running, to move off from position P .
- Press the brake pedal to come out of position P ,
- select position R or D ,
- gradually release the pressure on the brake pedal; the vehicle then moves off.
You can also move off from position N .
- With your foot on the brake, release the parking brake,
- select position R , D or M ,
- gradually release the pressure on the brake pedal; the vehicle then moves off.
- Select position D .
The gearbox always selects the most suitable gear taking account of the following:
- the style of driving,
- the road profile,
- the vehicle load.
The gearbox is then operating in autoadaptive mode, without any action on your part.
For immediate maximum acceleration without touching the gear lever, depress the accelerator pedal to the extent of its travel, passing the point of resistance (kickdown). The gearbox will automatically change down or maintain the gear selected until maximum engine speed is reached.
On a descent, the gearbox will automatically change down in order to provide efficient engine braking and good pickup.
If you take your foot off the accelerator suddenly, the gearbox will not change to a higher gear for reasons of safety.
When stationary with the gear lever in position D (drive), a vibration limiting device is activated by pressing the brake pedal.
Gearboxes and steering wheel
Reverse gear
- Select position R , with the vehicle stationary and the engine at idle.
Stopping the vehicle, starting the engine
- Select position P to immobilise the vehicle or to start the engine , with the parking brake on or off.
If the battery is flat and the gear lever is in position P , it will be impossible to change to another position.
- You can also select position N to park or to start the engine , with the parking brake on.
If position N is engaged inadvertently while driving, allow the engine to return to idle before engaging position D to restore drive.
2
Gearboxes and steering wheel
Operating fault
Any operating fault is indicated by an audible signal, accompanied by the message "Automatic gear fault" in the screen.
In this situation the gearbox operates in downgrade mode (locked in 3rd gear). You may feel a substantial knock when changing from P to R and from N to R (this will not cause any damage to the gearbox).
Do not exceed 60 mph (100 km/h), keeping within the limit of local speed restrictions.
Contact a CITROËN dealer or a qualified workshop as soon as possible.
Manual mode
Manual sequential gear changing.
- Select gear lever position M ,
- push the gear lever towards the + sign to change up, from 1 through to 6,
- conversely, push the gear lever towards the - sign to change down.
You can change from position D
(automatic mode) to position M (manual mode) at any time.
In manual mode, it is only possible to change from one gear to another if the vehicle speed and engine speed permit.
If they do not, the vehicle will operate temporarily in automatic mode.
When the vehicle is stationary or moving very slowly, the gearbox automatically selects first gear.
Good practice
Never select position N when the vehicle is moving.
Never select positions P or R unless the vehicle is stationary.
Never change between positions to optimise braking on a slippery surface.
There is a risk of damage to the gearbox:
- if you press the accelerator and brake pedals at the same time,
- if you force the gear lever from position P to another position in the event of a battery failure.
When the engine is at idle, brakes not applied, if position R , D or M is selected the vehicle moves even without the accelerator being pressed.
For this reason, do not leave children unsupervised inside the vehicle, with the engine running .
Gearboxes and steering wheel Starting and stopping
Door or bonnet open warning light
If this comes on, a door or the bonnet is not closed correctly, check!
STEERING WHEEL HEIGHT AND
DEPTH ADJUSTMENT
When the vehicle is stationary, unlock the steering wheel by lowering the lever.
Adjust the height and depth of the steering wheel, then lock by pushing the lever fully upwards.
STARTING AND STOPPING
Running and accessories position.
To unlock the steering, turn the steering wheel gently while turning the key, without forcing. In this position, certain accessories can be used.
Starting position.
The starter is operated, the engine turns over, release the key.
STOP position: steering lock.
The ignition is off. Turn the steering wheel until the steering locks. Remove the key.
Key
Take care to prevent the key from coming into contact with grease, dust, rain or a damp environment.
A heavy object attached to the key
(key ring, ...) weighing the key down in the ignition switch may cause a malfunction.
Good practice when starting
Diesel pre-heating warning light
If the temperature is high enough, the warning light comes on for less than one second, you can start without waiting.
In cold weather, wait for this warning light to switch off then operate the starter (Starting position) until the engine starts.
Good practice when stopping
Minimise engine and gearbox wear
When switching off the ignition, let the engine run for a few seconds to allow the turbocharger (Diesel engine) to return to idle.
Do not press the accelerator when switching off the ignition.
There is no need to engage a gear after parking the vehicle.
2
Steering mounted controls
Lights off
Automatic lights if your vehicle is fitted with a brightness sensor.
Side lights
Dipped beam (green)
Main beam (blue)
STEERING MOUNTED CONTROLS
DIRECTION INDICATORS
(flashing)
Left : downwards passing the point of resistance.
Right : upwards passing the point of resistance.
LIGHTING CONTROL
Front and rear lights
Selection is by turning ring A .
Checking by means of the indicator lights on the instrument panel is described in the "Instruments and controls" section of chapter 2.
Dipped beam/main beam change
Pull the stalk fully towards you.
Lights-on buzzer
When the ignition is switched off, when the driver's door is opened, a buzzer sounds if you have left your lights on.
Front and rear fog lights
Rotate ring B forwards to switch on and rearwards to switch off. The status is confirmed by the light on the instrument panel.
These operate with the side lights and the dipped beam headlamps.
Front fog lights (green,
1st rotation of the ring forwards).
Front fog lights (green) and rear fog lights (amber,
2nd rotation of the ring forwards).
To switch off the front and rear fog lights, turn the ring rearwards twice in succession.
Steering mounted controls
Daytime lights
Depending on the country in which the vehicle is sold, the vehicle may be equipped with daytime lights. The dipped headlamps come on when the vehicle is started.
This warning light comes on on the instrument panel.
In clear weather or in rain, both day and night, rear fog lights dazzle and are prohibited.
Do not forget to switch them off when they are no longer needed.
Automatic switching on of the lights switches off the rear fog lamps, but the front fog lamps remain on.
The instruments and controls
(instrument panel, display, air conditioning control panel, ...) are only lit on switching to the automatic switching on of the lights mode or when the lights are switched on manually.
3
Steering mounted controls
Automatic illumination of headlamps
Activation
The sidelamps and dipped beam headlamps switch on automatically if the light is poor, or during operation of the windscreen wipers. They switch off as soon as the light becomes bright enough or the windscreen wipers stop.
Turn the ring to the AUTO position. The activation of this function is accompanied by a message in the screen.
Deactivation
Turn the ring forwards or rearwards.
The deactivation of this function is accompanied by a message on the display.
This function is not compatible with the daytime running lamps.
The function is deactivated temporarily when you use the manual lights stalk.
In foggy weather or in snow, the sunshine sensor may detect sufficient light. As a consequence, the lighting will not come on automatically. If necessary, you must switch on the dipped beam headlamps manually.
If the sunshine sensor does not function correctly , the lighting comes on accompanied by the service warning lamp, an audible signal and a message in the screen.
Contact a CITROËN dealer or a qualified workshop. Do not cover the sunshine sensor located on the windscreen, behind the mirror. It is used for the automatic illumination of headlamps and for the automatic rain sensitive wipers.
HEADLAMP BEAM
Depending on the load in your vehicle, the beam setting must be adjusted.
0 - 1 or 2 people in the front seats.
1 - 5 people.
2 - 6 to 9 people.
3 - Driver + maximum authorised loads.
Initial setting is position 0.
Steering mounted controls
Wash-wipe and headlamp wash
Pull the stalk towards you, the wash-wipe is accompanied by a timed sweep of the wipers.
The headlamp wash is linked with the washwipe, it is triggered if the dipped headlamps are on.
To top up the levels, refer to the
"Levels" section of chapter 6.
WINDSCREEN WIPER STALK
Manual windscreen wipers
2
1
0
Intermittent
È
Fast wipe (heavy rain).
Normal wipe (moderate rain).
Off.
Single wipe
In the I ntermittent position, the wiping speed is in proportion to the vehicle speed.
Whenever the ignition has been switched off for more than one minute, with the windscreen wiper stalk in position 2, 1 or I, the stalk must be reactivated:
- move the stalk to any position,
- then move it back to the required position.
Automatic rain sensitive windscreen wipers
Do not cover the rain sensor, located in the centre of the windscreen, behind the mirror.
In the AUTO position, the windscreen wipers operate automatically and adapt their speed to the intensity of the rainfall.
When not in AUTO mode, for the other positions, refer to the manual windscreen wipers section.
3
Steering mounted controls
Activation
Press the control downwards. Activation of the function is accompanied by a message in the screen.
The automatic rain sensitive windscreen wipers function must be reactivated if the ignition has been switched off for more than one minute, by pressing the stalk downwards.
Deactivation/Switching off
Place the windscreen wipers stalk in position I ,
1 or 2 . Deactivation of the function is accompanied by a message in the screen.
In the event of malfunction of the automatic windscreen wipers, the windscreen wipers will operate in intermittent mode.
Contact a CITROËN dealer or a qualified workshop to have the system checked.
When using an automatic car wash, switch off the ignition to avoid triggering the automatic wiping.
In winter, it is advisable to wait for the windscreen to completely clear of ice before operating automatic wipe.
Special position of the windscreen wipers
In the minute following switching off of the ignition, any action on the stalk positions the wipers against the windscreen uprights.
This action enables you to position the wiper blades for winter parking, cleaning or replacement.
Refer to the "Changing a windscreen wiper blade" section of chapter 7.
To park the wipers in their normal position after this has been done, switch on the ignition and move the stalk.
Rear windscreen wiper
Turn the ring to the first notch.
Rear windscreen wash
Turn the ring past the first notch: the windscreen wash then the windscreen wiper operate for a fixed time.
In winter, in the event of a considerable amount of snow or ice, switch on the rear screen demister. Once de-icing is complete, remove the snow or ice which has accumulated on the rear wiper blade. You can then operate the rear windscreen wiper.
CRUISE CONTROL "CRUISE"
"This is the speed at which the driver wishes to drive".
This aid to driving in free-flowing traffic enables the vehicle to maintain the speed programmed by the driver, unless a steep gradient makes this impossible.
In order for it to be programmed or activated, the vehicle speed must be greater than 25 mph (40 km/h) with at least 4th gear engaged.
Steering mounted controls
This cruise control shows the function selection status in the instrument panel and displays the programmed speed:
Function selected,
display of the "Cruise
Control" symbol.
Function deactivated,
OFF (example at
107 km/h).
Function activated
(example at 107 km/h).
Vehicle speed above
(e.g. 118 km/h),
the programmed speed is displayed flashing.
Operating fault detected,
OFF - the dashes flash.
3
Steering mounted controls
Selecting the function
- Place the switch in the CRUISE position.
The cruise control is selected but is not yet active and no speed has been programmed.
Temporarily exceeding the speed
It is possible to accelerate and drive momentarily at a speed greater than the programmed speed. The value programmed flashes.
When the accelerator pedal is released, the vehicle will return to the programmed speed.
Reactivation
- Following deactivation of the cruise control, press this button.
Your vehicle will return to the last programmed speed.
Alternatively, you can repeat the "first activation" procedure.
First activation/ programming a speed
- Reach the chosen speed by pressing the accelerator.
- Press the SET or SET + button.
This programmes/activates the reference speed and the vehicle will maintain this speed.
Deactivation (off)
- Press this button or the brake or clutch pedal.
Changing the programmed speed
There are two methods of memorising a speed higher than the previous one:
Without using the accelerator:
- press the Set + button.
A brief press increases the speed by 1 mph
(km/h).
A maintained press increases the speed in steps of 5 mph (km/h).
Steering mounted controls
Using the accelerator:
- exceed the memorised speed until the speed required is reached,
- press the Set + or Set button.
To memorise a speed lower than the previous one:
- press the Set button.
A brief press decreases the speed by 1 mph
(km/h).
A maintained press decreases the speed in steps of 5 mph (km/h).
The programmed speed is cleared then replaced by three dashes. Contact a
CITROËN dealer or a qualified workshop to have the system checked.
Switching the function off
- Place the dial in position 0 or switch off the ignition to switch everything off.
Cancelling the programmed reference speed
When the vehicle becomes stationary, after switching off the ignition, the system no longer memorises a speed.
Good practice
When changing the programmed reference speed by means of a maintained press, pay attention as the speed can increase or decrease rapidly.
Do not use the cruise control on slippery roads or in heavy traffic.
In the event of a steep slope, the cruise control cannot prevent the vehicle from exceeding the programmed speed.
In any event, the cruise control cannot replace the need to observe the speed limits, nor can it replace the need for vigilance and responsibility on the part of the driver.
It is advisable to leave your feet near the pedals.
To avoid any jamming under the pedals:
- ensure that the mat and its fixings on the floor are positioned correctly,
- never place one mat on top of another.
FIXED SPEED LIMITER
If your vehicle is fitted with this function, the speed of your vehicle can be limited to a fixed speed of approximately 56/60 mph
(90/100 km/h) or 68/80 mph (110/130 km/h).
The fixed maximum speed cannot be changed.
The fixed speed limiter is not a function of the cruise control type. It cannot be activated or deactivated by the driver while driving.
3
Steering mounted controls
SPEED LIMITER "LIMIT"
"This is the selected speed which the driver does not wish to exceed".
This selection is made with the engine running while stationary or with the vehicle moving. The minimum speed which can be programmed is 20 mph (30 km/h).
The speed of the vehicle responds to the pressure of the driver's foot as far as the accelerator pedal point of resistance which indicates that the programmed speed has been reached.
However, pressing the pedal beyond this point of resistance to the floor permits exceeding of the programmed speed.
To resume use of the limiter, simply reduce the pressure on the accelerator pedal gradually and return to a speed below that programmed.
The operating actions may be carried out when stationary, with the engine running, or with the vehicle moving.
This speed limiter shows the function selection status on the instrument panel and displays the programmed speed:
Function selected,
displaying of the "Speed
Limiter" symbol.
Function deactivated,
last programmed speed - OFF
(example at 65 mph (107 km/h)).
Function activated
(example at 65 mph
(107 km/h)).
Vehicle speed above
(example 70 mph
(118 km/h)),
the programmed speed is displayed flashing.
Operating fault detected,
OFF - the dashes flash.
Steering mounted controls
Selecting the function
- Place the dial in the LIMIT position.
The limiter is selected but is not yet active. The screen indicates the last programmed speed.
Programming a speed
A speed can be programmed without activating the limiter but with the engine running.
To memorise a speed higher than the previous one:
- press the Set + button.
A brief press increases the speed by 1 mph
(km/h).
A maintained press increases the speed in steps of 5 mph (km/h).
To memorise a speed lower than the previous one:
- press the Set button.
A brief press decreases the speed by 1 mph (km/h).
A maintained press decreases the speed in steps of 5 mph (km/h).
Activation/Deactivation (off)
Pressing this button once activates the limiter, pressing the button again deactivates it (OFF).
3
Steering mounted controls
Exceeding the programmed speed
Pressing the accelerator pedal in order to exceed the programmed speed will have no effect unless you press the pedal firmly beyond the point of resistance .
The limiter is deactivated temporarily and the programmed speed flashes.
Switching the function off
- Place the dial in position 0 or switch off the ignition to switch the system off.
The last programmed speed remains in the memory.
Operating fault
The programmed speed is cleared then replaced by three dashes.
Contact a CITROËN dealer or a qualified workshop to have the system checked.
To return to the limiter function, reduce your speed to below the programmed speed.
Flashing of the speed
The speed flashes:
- following forcing of the accelerator point of resistance,
- when the limiter cannot prevent an increase in the vehicle speed due to the profile of the road or on a steep descent,
- in the event of sharp acceleration.
Good practice
In any event, the speed limiter cannot replace the need to observe speed limits, nor can it replace the need for vigilance and responsibility on the part of the driver.
Always pay attention to the profile of the road and sharp acceleration and stay in complete control of your vehicle.
To avoid any jamming under the pedals:
- ensure that the mat and its fixings on the floor are positioned correctly,
- never place one mat on top of another.
VENTILATION
WITH MANUAL ADJUSTMENT
If your vehicle is fitted with these controls, they are located on the control panel of the fascia centre console.
Air conditioning A/C
If fitted on your vehicle, the air conditioning can only operate with the engine running.
The air conditioning does not operate if the air flow is set to 0.
Temperature adjustment
Control positioned:
- in the blue zone, triggers cool air,
- in the red zone, triggers heating of the interior ambient air.
Pressing the button triggers the operation of the air conditioning, the diode is lit. Pressing the button again switches the function off and the diode is switched off.
Ventilation
Air flow
The force of the blown air, from the vents, varies from 1 to the strongest 4. Position 0 switches it off.
Remember to adjust this control in order to reach the ambient air comfort level.
Air distribution
The air supply distribution is directed by the control turned towards:
the side vents and the central vents,
the side vents, the central vents and the footwells,
the footwells,
the windscreen and the footwells,
the windscreen.
The air distribution can be modulated by placing the control in the intermediate positions, marked " ● ". 3
Ventilation
Intake of exterior air
The diode on the button is off.
This is the preferred operating position.
Recommended settings
For optimum operation of the manual system, the settings below are recommended:
Recirculation of interior air
The diode on the button is lit.
Recirculation temporarily prevents exterior odours and smoke from entering the passenger compartment.
Used with the air conditioning switched on and setting of the force of blown air (from
1 to 4), recirculation enables you to obtain the required ambient air comfort level more quickly with both hot or cold settings.
This position should only be temporary.
If I require...
Air distribution
Temperature
Heating
Cooling
When your ambient air comfort level has been reached, return to the intake of exterior air position to permit renewal of the air in the passenger compartment and avoid misting.
This operating mode is preferable.
Deicing
Demisting
Air flow
Air recirculation
Air conditioning
A/C
Ventilation
AUTOMATIC AIR CONDITIONING WITH SEPARATE ADJUSTMENTS
If your vehicle is fitted with this control panel, it is located on the centre console.
Good practice
For maximum cooling or heating of the passenger compartment, it is possible to exceed the value 15 by turning until LO is displayed or the value 27 by turning until HI is displayed.
For optimum comfort, the difference between the value displayed for the driver and for the passenger should not be greater than 3.
On entering the vehicle, the inside temperature may be much colder (or warmer) than is comfortable. There is no advantage in changing the value displayed in order to quickly reach the level of comfort required. The system will use its maximum performance to reach the comfort value set.
3
Ventilation
Automatic operation
AUTO comfort programme
This is the normal air conditioning system operating mode.
Driver or passenger side comfort value
The value indicated on the display corresponds to a level of comfort and not a temperature in degrees Celsius or
Fahrenheit.
Press this button, the AUTO symbol is displayed.
In accordance with the comfort value selected, the system controls the distribution, the fl ow and the intake of air to guarantee comfort and a suf fi cient circulation of air in the passenger compartment. No further action on your part is required.
Turn this control to the left or to the right to decrease or increase the value. A setting around the value 21 provides optimum comfort. However, depending on your requirements, a setting between 18 and 24 is usual.
When the engine is cold, to prevent an excessive diffusion of cold air, the ventilation will reach its optimum level gradually.
For your comfort, the settings are stored when the ignition is switched off and are reinstated the next time the vehicle is started, if the temperature in the passenger compartment has not changed significantly; otherwise, operation resumes in automatic mode.
Do not cover the sunshine sensor, located on the windscreen behind the mirror, it is used for regulation of the air conditioning.
Manual operation
You can, according to your requirements, make a different selection from that offered by the system by changing a setting.
The other functions will still be controlled automatically. Pressing the AUTO button restores fully automatic operation.
Air distribution
Pressing this button several times in succession directs the air flow towards:
- the windscreen and footwells,
- the side vents, central vents and footwells,
- the side vents and central vents.
Air flow
Press the small fan button to reduce the flow or the large fan button to increase the flow.
On the display, the blades of the fan darken when the flow is increased.
Deactivating the system
Press the air flow small fan button until the fan symbol disappears.
Ventilation
Intake of exterior air/
Recirculation of interior air
Press this button to recirculate the interior air. The recirculation symbol is displayed.
Recirculation prevents exterior odours and smoke from entering the passenger compartment. Avoid prolonged operation in interior air recirculation mode (risk of condensation, odour and humidity).
Pressing this button again activates the intake of exterior air.
This action deactivates all of the system's functions, with the exception of the air recirculation and rear screen demisting
(if fitted on your vehicle). Your comfort setting is no longer maintained and is switched off.
For your comfort, do not deactivate the system for long periods.
Switching the air conditioning
On/Off
Press this button, the A/C
symbol is displayed and the air conditioning is activated.
Pressing this button again switches off the air cooling.
Pressing the large fan button or the AUTO button reactivates the system with the values set before it was deactivated.
3
Ventilation
CORRECT USE OF THE
VENTILATION AND AIR
CONDITIONING
Vents
"Leave them open"
For optimum distribution and diffusion of hot or cool air in the passenger compartment, there are adjustable central and side vents which can be directed sideways (right or left) towards the top of the body. For your comfort while driving, do not close them, direct the flow of air towards the windows instead.
The air vents directed towards the floor of the vehicle complete the equipment.
Passenger compartment filter, carbon filter
Ensure that this fi lter is in good condition and have all of the fi lter elements replaced regularly.
Refer to the "Checks" section of chapter 6.
Air conditioning
In all seasons, the air conditioning should only be used with the windows closed.
However, if the interior temperature remains high after a prolonged period parked in the sun, do not hesitate to ventilate the passenger compartment for a few minutes.
Use the AUTO mode as much as possible as it permits optimised control of all of the functions: air flow, passenger compartment comfort temperature, air distribution, air intake mode or air recirculation in the passenger compartment.
Operate the air conditioning system for 5 to
10 minutes, once or twice a month, to keep it in perfect working order.
It is normal that the condensation created by the air conditioning system results in a flow of water which may form a puddle under the vehicle when parked.
If the system does not produce cold air, do not use it and contact a CITROËN dealer or a qualified workshop.
Ventilation
DE-ICING AND DEMISTING
Manual mode
Direct the control to this air distribution setting.
Direct the control to this temperature setting.
Increase the air flow setting.
Press the air conditioning.
Returning to exterior air intake open permits renewal of the air in the passenger compartment
(diode off).
3
Ventilation
De-icing the rear screen and/ or mirrors
Pressing this button, with the engine running, activates the rapid demisting - de-icing of the rear screen and/or electric mirrors.
This function switches off:
- when the button is pressed,
- when the engine is switched off,
- automatically to prevent excessive energy consumption.
Automatic air conditioning: visibility programme
The comfort programme (AUTO) may not be sufficient to quickly demist or de-ice the windows (humidity, several passengers, ice).
In this case, select the visibility programme.
The visibility programme indicator light comes on.
It activates the air conditioning, the air flow, the de-icing of the rear screen and provides optimum distribution of the ventilation to the windscreen and side windows.
It deactivates the air recirculation.
Ventilation
REAR VENTILATION
If your vehicle is fitted with an additional air conditioning unit, located in the rear of the vehicle. The distribution rail located in the roof and the 6 individualised diffusion vents provide a perfect diffusion of the ambient air selected.
The warm air diffused at the floor, from the front air conditioning unit, is distributed at the feet of the rear passengers of the 2nd row.
A warm air diffusion vent, located on the specific unit, completes the assembly for the feet of the rear passengers of the 3rd row.
Activation/Deactivation
This button, located on the overhead storage unit, enables you to activate/deactivate the operation of the rear controls from the driver's seat or the front passenger seat.
The first press activates (green diode lit).
A second press deactivates (diode off).
Air flow
The force of the blown air, via the vents, varies from 1 to the strongest 4.
To obtain a comfortable level of ambient air, remember to adjust this control.
To deactivate the blower, place the control in position 0.
Temperature adjustment
Control positioned:
- on the blue, triggers cool air,
- on the red, triggers heating of the ambient air.
3
Ventilation
Rear ventilation
ADDITIONAL HEATING
Coolant circuit heater
This is an additional and separate system which heats the Diesel engine hot coolant loop to make starting easier.
It improves the demisting and defrosting performance.
Vehicles fitted with an HDi engine may be fitted with a heater. When the engine is at idle or the vehicle is stationary, it is normal to notice a high-pitched whistling noise and a slight emission of smoke and odour.
Good practice
To avoid any risk of poisoning or asphyxiation, the heater must not be used, even for short periods, in an enclosed space such as a garage or workshop which is not fitted with an exhaust gas extraction system.
Do not park the vehicle on an inflammable surface (dry grass, dead leaves, paper…), there is a risk of fire.
The temperature near the heater must not exceed 120 °C. A temperature higher than this (for example in the case of painting in an oven) could damage the components of the electronic circuits.
The heater is supplied by the vehicle's fuel tank. Ensure that the low fuel warning lamp is not on.
Have the heater checked at least once a year at the beginning of winter.
Maintenance and repairs should only be carried out by a CITROËN dealer or a qualified workshop. Use recommended replacement parts only.
Ventilation
3
Seats
2 - Seat back angle adjustment
Pull the lever upwards and set the required angle.
FRONT SEATS
Depending on the version and configuration of your vehicle, different front seats are fitted, either:
- a driver's seat and a passenger seat,
- an individual driver's seat and a two-seat passenger bench.
Depending on the models, the following adjustments are available:
1 - Forwards/backwards adjustment
Lift the bar and slide the seat forwards or backwards.
3 - Driver's seat height adjustment
Depending on the version and configuration of your vehicle, you have either:
- a passive adjustment: pull the handle upwards then take your weight off the seat to raise, or push on the seat to lower,
3
Seats
- an active adjustment: manoeuvre the handle upwards or downwards until the desired position is reached.
The adjustment is correct when the upper edge of the head restraint is level with the top of the head.
To remove it, set it in the high position, press the tabs and pull upwards and forwards at the same time.
To re-install, engage the head restraint rods in the holes, making sure they are aligned with the seat back.
Adjustable armrest
To place the armrest in its rest position:
- raise it until it is in the centreline of the seat back.
Never drive with the head restraints removed; they must be in place and correctly adjusted.
To place the armrest in a position for use:
- fold it down fully,
- raise it slowly to the required position,
- if you pass the required position, raise it fully then repeat the operations above. 4 - Driver's seat lumbar adjustment
Move the lever up or down to obtain the required position.
Head restraint height adjustment
To raise or lower the restraint, pull it forwards, then slide it.
Front heated seat controls
Press the corresponding control, located on the overhead storage unit.
The temperature is controlled automatically.
Pressing a second time stops operation.
Seats
2-SEAT FRONT BENCH
If your vehicle is fitted with this bench seat, it is fixed and has a 3rd seat belt.
Head restraint
Press the tab to adjust the height of the head restraint.
To remove the head restraint, press the tabs and raise the head restraint.
The adjustment is correct when the upper edge of the head restraint is level with the top of the head.
Never drive with the head restraints removed; they must be in place and adjusted correctly.
Seat back pockets
If your vehicle is fitted with these, they are located on the backs of the front seats.
3
REAR SEATS
Depending on the version and configuration of your vehicle, you have different types of rear seat.
The individual seat is always located on the right-hand side and the bench on the left-hand side (in the direction of travel).
Seats
3
Seats
Individual passenger seat
This seat and the 2-seat bench are interdependent. Any handling operation must begin with the individual seat.
Two models are offered:
Type 1: an individual seat which can be raised permitting access to the rear space.
Type 2: an individual seat the back of which can be folded to the table position then raised, facilitating access to the rear space.
Two-seat bench
Three models are offered:
Type 1: a two-seat cushion with fixed seat back.
Seats
Type 2: two seats with folding seat backs and seat cushion which can be raised.
Characteristics depending on the type of seat
Seat fitted with this control: the seat back can be tilted.
Seat fitted with this control: the seat back can be folded and coupled with the raising control.
Type 3: a two-seat cushion with individual tilting seat backs which can be folded to the table position and cushion which can be raised.
Seat fitted with this control: the seat back can be tilted and raised.
"Comma" type head restraint.
3
Seats
This armrest may be offered. The seat backs of the centre seats are designed with cup holder and storage recesses.
The seat backs of the outer seats are fitted with a storage net.
Seats
Handling
Enter, exit the vehicle: raise the seat
Always start with the individual seat located on the right-hand side and place the head restraint in the low position.
Folding the seat back to the table position
(centre seat example)
- Place the head restraints in the low position.
- Raise this handle to unlock the seat back (from the rear, lower the handle).
- Tilt the seat back onto the seat cushion.
Seat and bench of type 1:
- Raise the seat.
- Unlock the front feet using this handle.
- Disengage the seat from its anchorages.
- Remove the seat from the vehicle via the side door in row 2 and via the rear in row 3.
Seat and bench of type 2/type 3:
- Fold the seat back to the table position using this handle.
- Raise the seat.
- Unlock the front feet using this handle.
- Disengage the seat from its anchorages.
- Remove the seat from the vehicle via the side door in row 2 and via the rear in row 3.
3
Seats
Installing the seat
Always install the bench first.
- Check that there are no objects obstructing the anchorages and preventing correct locking of the feet.
- Engage the front feet in the anchorages on the floor.
- Lock the front feet using this handle.
- Tilt the seat towards the rear until the rear feet lock. Be aware of the feet of passengers when tilting.
For the type 2 seat and the type 2/3 bench: fold up the seat back.
Correct anchoring of the front feet
Check that the seat is locked correctly on the floor when it is returned to the sitting position.
Precautions
Following the various handling operations:
- do not remove a head restraint without storing it and fix it to a support,
- check that the seat belts are always accessible to the passenger and easy to fasten,
- a passenger must not take his seat without adjusting his seat's head restraint correctly and adjusting and fastening his seat belt.
Etiquette
While driving, it is prohibited to have a passenger:
- in row 3 if the seat back in front (row 2) is in the table position.
- in row 3 if the seat/bench in front (row 2) is in the folded position.
- in row 3 if the seat in front (row 2) has been removed.
- on the centre seat if the right-hand side seat is in the folded position.
Seats
3
Seats
SEAT AND BENCH
CONFIGURATIONS
Examples of various layouts combining comfort and practicality
The various operations must be carried out while stationary.
Do not fit seats in the 3rd row without first fitting the corresponding seatbelts.
5 seats
7 seats 8 seats
6 seats
9 seats
Practical information
PRACTICAL INFORMATION
CAB FITTINGS
Depending on the vehicle's equipment, the various fittings below enhance your cab.
Sun visor
To prevent dazzle from ahead, fold the sun visor down.
A pocket is provided in the driver's sun visor for storing toll cards, tickets, ...
Glove box
This is fitted with a lock, you can lock it using the key.
It contains three sockets for the connection of portable electronic equipment (video equipment, ...) if the vehicle is fitted with a colour screen.
It also contains cup holders and compartments for storing maps, a packet of cigarettes, an A4 format document, a pen, etc.
Storage compartment
3
Practical information
Ashtray
12 volt socket
The maximum power of the socket, which is of the cigarette lighter type, is 120 W.
Storage tray and bottle holder (1.5 L)
Any liquid carried in an open receptacle
(cup or other) may be spilt, with the risk of damage to switches and controls at the driving position and centre console. "Take care".
Ticket storage
According to the configuration of the vehicle.
Overhead storage unit
This is located above the sun visors and has two compartments, with or without a cover, for storing a jumper, a file, ...
Be aware that storing a hard object in direct contact with the compartment may result in noise.
Practical information
3
Practical information
Front courtesy light
SEATING AREA COURTESY
LIGHTS
Automatic switching on/off
The front courtesy light comes on when the key is removed from the ignition.
All of the courtesy lights come on when the vehicle is unlocked, when one of the corresponding doors is opened and for location of the vehicle using the remote control.
They switch off gradually after the ignition is switched on and when the vehicle is locked.
Rear courtesy light
Front: comes on when one of the front or rear doors is opened.
Row 2 and row 3: comes on when one of the rear doors or the boot is opened, if fitted on your vehicle.
Permanently off.
Individual reading light
If fitted on the vehicle, these are switched on and off by means of a manual switch, with the ignition on.
Permanently on, ignition on.
Practical information
Areas for toll cards/car park tickets
The athermic windscreen has two nonreflective zones located either side of the base of the interior mirror.
They are intended for affixing toll cards and/or car park tickets.
Mat fitting/removal
When removing the front mat, push the seats as far back as possible and remove the fixings.
When refitting, position the mat correctly on the pins and clip the fixings. Check that the mat is secured correctly.
SEATING AREA FITTINGS
Depending on the vehicle's equipment, the various fittings below enhance your seating area.
To prevent the mat from becoming caught under the pedals:
- only use mats suited to the fixings already present in the vehicle. It is imperative that these fixings are used.
- never fit one mat on top of another.
12 volt socket
This operates with the ignition off, so limit its use to avoid discharging the battery.
Maximum power: 120 W.
Grab handle Cup holder
Any liquid carried in an open receptacle
(cup or other) may be spilt, presenting a risk. "Take care".
3
Practical information
Nets on the back of the outer seats Fittings/storage compartments
Storage tray and bottle holder
(0.5 L)
Coat hooks
Load retaining net fixing
Raise the flap to gain access to the load retaining net fixings.
Stowing rings
Use the stowing rings on the rear floor to fix the net, your loads or luggage.
For safety reasons, on sharp braking, it is recommended that heavy objects are placed as far forward as possible.
You are advised to immobilise the load by securing it firmly using the stowing rings on the floor.
Load space cover
To install:
- position one end of the load space cover roller in its notch,
- compress the opposite end of the roller and put it in place,
- release it so that it engages,
- unroll the load space cover to the pillars,
- fix the two hooks on the pillars.
Practical information
To remove:
- pull the load space cover towards you to disengage it from its fixings,
- reinsert the load space cover in its roller,
- compress it and remove it from its support.
3
Rear suspension
Two types of suspension are available. the increasing or lightening of the load on the vehicle's platform is detected by two height sensors. When all of the doors are closed, the sensors trigger the automatic height correction and determine the optimum height of the sill for the vehicle's driving conditions.
Two functions
1.
Automatic height correction
2.
Manual height correction
Metal suspension
This equipment adopts long movement limiters which make it possible to guarantee stable behaviour both when loaded and when empty.
No action on your part is required except to ensure that maintenance is carried out and that the authorised loads are complied with.
Rear suspension with pneumatic height correction
If fitted on your vehicle, this type of suspension regulates the variations in the height of the rear platform of your vehicle irrespective of the weight of the load, within the limit of the authorised values. On board,
height of the rear sill
The pneumatic suspension automatically regulates the variations in the height of the rear platform of your vehicle.
A red warning light on your instrument panel fl ashes if the height is not at its optimum level and requires correction, drive slowly until this warning lamp goes off.
The automatic height correction is temporarily inactive:
- if a door/the tailgate is open,
- when braking or when stopped at a red traffic signal (brake pedal pressed).
Deactivation of automatic height correction
The control which permits deactivation of automatic regulation is located on the righthand side, at the rear of the vehicle.
With the vehicle stationary:
- press and hold,
- release the control.
Deactivation is confirmed by the LED which is on. It remains on for approximately
30 seconds.
You must deactivate automatic height correction manually in the following situations:
- when working underneath the vehicle,
- when changing a wheel,
- when the vehicle is being transported by lorry, train, ferry, boat, ...
Return to automatic correction
With the vehicle stationary:
- press and hold,
- release the control.
Return to automatic height correction is confirmed by the LED which goes off.
According to the configurations, a bleep may be heard during these operations.
Carry out these operations with the vehicle still stationary and:
- with the front and side doors closed,
- with the parking brake applied,
- do not leave your foot on the brake pedal.
First use
To initialise the function, press the control for approximately 2 seconds.
2 - Manual correction of the height of the rear sill
If your vehicle is fitted with this adjustment, the control is located on the right-hand side at the rear of the vehicle.
This manual adjustment permits "lowering" or "raising" of the height of the sill of the rear platform to facilitate operations in a parking area.
This adjustment of the height of the sill is restricted by a lower limit and an upper limit.
Lower: downwards adjustment of the platform sill
Press the control downwards continuously.
Release the button to stop the movement,
"3 beeps" indicate that you have reached the maximum limit, the movement stops automatically.
Raise: upwards adjustment of the platform sill
Press the control upwards continuously.
Release the button to stop the movement,
"3 beeps" indicate that you have reached the maximum limit, the movement stops automatically.
Return to the optimum sill height
Press the control up or down twice in succession, the opposite of the position of the load sill.
Rear suspension
Malfunctions
If the load sill is not adjusted when the control is pressed, "3 beeps" indicate a malfunction for the following reasons:
- foot on the brake pedal with the key in the ignition,
- excessive use of the manual correction,
- low battery charge,
- other.
If the audible signal persists, contact a
CITROËN dealer or a qualified workshop.
3
Rear suspension
Deactivation of manual height correction
With the vehicle stationary:
- press and hold,
- release the control.
Deactivation is confirmed by the LED which is on. It remains on for approximately 30 seconds.
Return to manual height correction
With the vehicle stationary:
- press and hold,
- release the control.
Return to manual correction is confirmed by the LED which goes off.
According to the configuration, a beep may be heard during these operations.
Good practice
When stationary and with the ignition key removed, excessive use of the system consumes battery power.
Driving with the height of the rear platform:
- too low, risks damaging the technical components underneath the vehicle,
- too high, risks unstable driving.
If you start and the warning lamp flashes, to switch it off:
- correct the position of the manual control which is still at the lower or upper limit,
- or drive slowly at above 6 mph (10 km/h), until height correction returns to automatic mode.
Long term parking
Avoid parking for a long duration on ground which could present a potential obstacle as your vehicle could lower.
Following a long period out of use, the height of the platform may change due to the automatic height correction on unlocking or on opening one of your vehicle's doors.
Warning lamp
Refer to the "Instruments and controls" section of chapter 2.
You must deactivate the manual height correction in the following situations:
- when working underneath the vehicle,
- when changing a wheel,
- when the vehicle is being transported by lorry, train, ferry, boat, ...
Mirrors and windows
MIRRORS AND WINDOWS
MIRRORS
If fitted on your vehicle, the mirror is supplemented by a 2nd lower mirror. This mirror is spherical to broaden the field of side vision. Objects observed are, in reality, closer than they appear. Therefore, take this into account in order to judge the distance correctly.
Electric door mirrors
- Move switch A to the right or to the left to select the corresponding mirror.
- Move knob B in all four directions to adjust.
- Return switch A to the centre position.
Electric folding
If your vehicle is fitted with this function, the mirrors can be folded electrically from the inside, with the vehicle parked and the ignition on:
- Place switch A in the centre position.
- Pull switch A rearwards.
From the outside, lock the vehicle using the remote control or the key.
Electric unfolding
The electric unfolding of the mirrors is possible with the remote control or the key on unlocking the vehicle, unless folding was selected using switch A . In this case, pull the switch rearwards from the centre position again.
The folding/unfolding on locking/unlocking can be deactivated. Contact a CITROËN dealer or a qualified workshop.
Heated mirrors
If your vehicle is fitted with this function, press the rear screen demisting button.
Manual exterior mirrors
Move the lever in all four directions to adjust.
When the vehicle is parked, the exterior mirrors can be folded back manually.
If the mirror casing has come out of its initial location, with the vehicle stationary, reposition the mirror casing manually or use the electric folding switch.
There is no risk of breakage even in the presence of ice.
3
Mirrors and windows
Manual rear view mirror
The rear view mirror has two positions:
To change from one to the other, push or pull the lever on the lower edge of the mirror.
MONITORING MIRROR
This mirror, placed on top of the central mirror, enables the driver or front passenger to observe all the rear seats.
Fitted on its own ball joint, it's manual adjustment is simple and provides a view of the rear interior of the vehicle.
It can also be adjusted for improved visibility during manoeuvres or when overtaking.
REAR WINDOWS
2nd row side windows
If fitted on your vehicle, the 2nd row side windows can be opened.
Squeeze the two controls then move the window sideways. 4 notches are available.
While driving, the window must be closed or secured on one of the 4 notches.
3rd row rear quarter lights
These are fixed.
ELECTRIC WINDOWS
1.
Driver's electric window control
2.
Passenger electric window control
There are two operating modes:
The electrical functions of the electric windows are deactivated:
- approximately 45 seconds after the ignition is switched off,
- after one of the front doors is opened, if the ignition is off.
Manual mode
Press or pull the control, without passing the point of resistance. The window stops when you release the control.
Automatic mode
Press or pull the control, beyond the point of resistance. The window opens or closes fully when the control is released. Pressing the control again stops the movement of the window.
Safety auto-reverse
If your vehicle is fitted with the safety autoreverse function, when the window rises and meets an obstacle, it stops and partially lowers.
In the event of unwanted opening of the window on closing, press the control until the window is fully open. Within the next
4 seconds, pull the control until the window is fully closed.
The safety auto-reverse does not operate during these operations.
Mirrors and windows
Reinitialisation
Following reconnection of the battery, the safety auto-reverse function must be reinitialised.
Lower the window fully, then raise it, it will rise in steps of a few centimetres each time the control is pressed. Repeat the operation until the window is fully closed.
Continue to press the control for at least one second after the window closed position has been reached.
The safety auto-reverse does not operate during these operations.
Good practice
If the electric windows meet an obstacle during operation, you must reverse the movement of the window. To do this, press the control concerned.
When the driver operates the passenger electric window controls, he must ensure that no one is preventing correct closing of the windows.
The driver must ensure that the passengers use the electric windows correctly.
Be aware of children when operating the windows.
3
Driving safely
DRIVING SAFELY
PARKING BRAKE
Applying
Pull the parking brake to immobilise your vehicle.
Check that the parking brake is applied firmly before leaving the vehicle.
If the parking brake is still on or has not been released properly, this is indicated by this warning lamp which comes on on the instrument panel.
When parking on a slope, direct your wheels towards the pavement and pull the parking brake lever up.
There is no advantage in engaging a gear after parking the vehicle, particularly if the vehicle is loaded.
Releasing
Pull the lever and press the button to lower the parking brake lever.
HAZARD WARNING LAMPS
Press this button, the direction indicators flash.
They can operate with the ignition off.
The hazard warning lamps should only be used in dangerous situations, when stopping in an emergency or when driving in unusual conditions.
Parking sensors
Activation/Deactivation
You can activate or deactivate the system by pressing this button.
The activation or deactivation of the system is stored when the vehicle stops.
REAR PARKING SENSORS
The audible and/or visual rear parking sensor system consists of four proximity sensors, installed in the rear bumper. The sensors detect any obstacle which enters the field: person, vehicle, tree, fence, behind the vehicle during the manoeuvre.
Certain objects detected at the beginning of the manoeuvre will no longer be detected at the end of the manoeuvre due to the blind spots between and below the sensors.
Examples: stake, roadworks cone or pavement post.
Engage reverse gear
An audible signal confirms the activation of the system by engaging reverse gear.
The proximity information is indicated by an audible signal which becomes more rapid as the vehicle approaches the obstacle. When the distance between the rear of the vehicle and the obstacle is less than approximately thirty centimetres, the audible signal becomes continuous.
Display in the screen
Malfunction
In the event of a malfunction, when reverse gear is engaged the LED in the button comes on, accompanied by an audible signal and a message in the screen. Contact a CITROËN dealer or a qualified workshop.
Good practice
In bad weather or in winter, ensure that the sensors are not covered with mud, ice or snow.
The system will be deactivated automatically if a trailer is being towed or if a bicycle carrier is fitted (vehicle fitted with a towbar or bicycle carrier recommended by
CITROËN).
The parking assistance cannot, in any circumstances, take the place of the vigilance and responsibility of the driver.
Stop the assistance
Change to neutral.
4
Driving safely
HORN
Press the centre of the steering wheel.
ANTI-LOCK BRAKING SYSTEM
(ABS - EBFD)
The ABS and EBFD (electronic brake force distribution) systems improve the stability and manoeuvrability of your vehicle on braking, in particular on poor or slippery surfaces.
The ABS prevents locking of the wheels, the EBFD provides control of the braking pressure wheel by wheel.
Good practice
The anti-lock braking system comes into operation automatically when there is a risk of wheel lock. It does not reduce the braking distance.
On very slippery surfaces (ice, oil, etc...) the ABS may increase the braking distance.
When braking in an emergency, do not hesitate to press the brake pedal firmly, without releasing the pressure, even on a slippery surface, you will then be able to continue to manoeuvre the vehicle to avoid an obstacle.
Normal operation of the ABS may be felt by slight vibration of the brake pedal.
When changing wheels (tyres and rims), ensure that these are recommended by
CITROËN.
If this warning light comes on, accompanied by an audible signal
ABS and a message on the display, it indicates a malfunction of the
ABS which could result in a loss of control of the vehicle on braking.
If this warning light comes on, together with the brake and STOP
ABS warning lights, accompanied by an audible signal and a message on the display, it indicates a malfunction of the electronic brake force distribution which could result in a loss of control of the vehicle on braking.
Stop immediately.
In both cases, contact a CITROËN dealer or a qualified workshop.
EMERGENCY BRAKING
ASSISTANCE SYSTEM (EBA)
In an emergency, this system enables the optimum braking pressure to be reached more quickly, press the pedal firmly without releasing it.
It is triggered by the speed at which the brake pedal is activated.
This alters the resistance of the brake pedal under your foot.
To prolong the operation of the emergency braking assistance system: keep your foot on the brake pedal.
acts on the engine and the brake of one or more wheels, in order to put the vehicle back on course.
Operation of the ASR and ESP systems
The LED flashes when the
ASR or ESP is triggered.
TRACTION CONTROL (ASR) AND
DYNAMIC STABILITY CONTROL
(ESP)
These systems are linked and complement the ABS.
The ASR system is very useful for maintaining optimum drive and avoiding losses of control of the vehicle on acceleration.
The system optimises drive to prevent the wheels skidding, by acting on the brakes of the drive wheels and on the engine. It also allows the directional stability of the vehicle to be improved on acceleration.
Use the ESP to hold your course without attempting to countersteer.
If there is a variation between the trajectory followed by the vehicle and that required by the driver, the ESP system automatically
Deactivating the ASR/ESP systems
In certain exceptional conditions (starting the vehicle when stuck in mud or snow, or on loose ground...), it could prove useful to deactivate the ASR and ESP systems to make the wheels spin and regain grip.
- Press the button, located on the centre console.
- The indicator lamp comes on: the ASR and ESP systems no longer act.
They engage again:
- automatically above 30 mph (50 km/h),
- manually by pressing the button again.
Driving safely
Operating check
ESP
When a malfunction of the systems occurs, the warning lamp comes on, accompanied by an audible signal and a message in the screen.
Contact a CITROËN dealer or a qualified workshop to have the system checked.
The warning lamp may also come on if the tyres are under-inflated. Check the pressure of each tyre.
Good practice
The ASR/ESP systems offer increased safety during normal driving, but should not encourage the driver to take risks or to drive at high speed.
The operation of these systems is assured only if the recommendations of the manufacturer regarding the wheels (tyres and rims), the braking components, the electronic components and fitting and repair procedures are observed.
After an impact, have these systems checked by a CITROËN dealer or a qualified workshop.
4
Seat belts
SEAT BELTS
Height adjustment
Squeeze the control with the return and slide the assembly on the driver's seat side and on the individual passenger seat side.
If your vehicle is fitted with a front bench, the height of the seat belt associated with the centre seat cannot be adjusted.
Unfastening
Press the red button.
Driver's seat belt not fastened warning light
When the vehicle is started, this warning light comes on if the driver has not fastened his seat belt.
Fastening
Pull the strap, then insert the tongue into the buckle.
Check that the seat belt is fastened correctly by pulling the strap.
Passenger seat belt not fastened warning light
If your vehicle is fitted with a front passenger seat, when the vehicle is started, this warning light comes on if the passenger has not fastened his seat belt.
Good practice
The driver must ensure that passengers use the seat belts correctly and that they are all strapped in securely before moving off.
Wherever you are seated in the vehicle, always fasten your seat belt, even for short journeys.
The seat belts are fitted with an inertia reel which automatically adjusts the length of the strap to your size.
Do not use accessories (clothes pegs, clips, safety pins, etc.) which permit a clearance with the seat belt straps.
Ensure that the seat belt has reeled in correctly after use.
After folding or moving a seat or a rear bench seat, ensure that the seat belt has reeled in correctly and that the buckle is ready to accommodate the tongue.
Depending on the nature and seriousness of any impact, the pretensioning device may be triggered before and independently of inflation of the airbags. It instantly tightens the seat belts against the body of the occupants.
Triggering of the pretensioners is accompanied by a slight discharge of harmless smoke and a noise, due to the activation of the pyrotechnic cartridge incorporated in the system.
Seat belts
The force limiter reduces the pressure of the seat belt against the body of the occupants.
The pretensioning seat belts are active when the ignition is switched on.
The inertia reels are fitted with a device which automatically locks the strap in the event of a collision or emergency braking or if the vehicle rolls over.
You can unfasten the seat belt by pressing the red button on the buckle. Guide the seat belt after unfastening.
The airbag warning lamp comes on if the pretensioners are triggered. Contact a
CITROËN or a qualified workshop.
In order to be effective, a seat belt must:
- restrain one person only,
- must not be twisted, check by pulling in front of you with an even movement,
- be tightened as close to the body as possible.
The upper part of the seat belt should be positioned in the hollow of the shoulder.
The lap part should be placed as low as possible on the pelvis.
Do not invert the seat belt buckles as they will not fulfil their role completely. If the seats are fitted with armrests, the lap part of the seat belt should always pass under the armrest.
Check that the seat belt is fastened correctly by pulling the strap firmly.
Recommendations for children:
- use a suitable child seat if the passenger is less than 12 years old or shorter than one metre fifty,
- never allow a child to travel on your lap, even with the seat belt fastened.
For further information regarding child seats, refer to the "Children on board" section of chapter 4.
In accordance with current safety regulations, your CITROËN dealer guarantees all work or any checks, from testing to maintenance, on your seat belt equipment.
Have the seat belts checked regularly (even after a minor impact) by a CITROËN dealer or a qualified workshop: they must not show any signs of wear, cutting or fraying and they must not be transformed or modified.
Clean the seat belt straps with soapy water or a textile cleaning product, sold by CITROËN dealers.
FRONT SEAT BELTS
The front seats are fitted with pretensioners and force limiters.
Without front airbag
If your vehicle is fitted with a front bench without front airbag, the centre passenger's seat belt does not have a pretensioner.
REAR SEAT BELTS
If your vehicle is fitted with an individual seat and a 2-seat bench, the 3 seats are fitted with three-point seat belts and inertia reels.
The centre seat has its seat belt guide and inertia reel integrated with the seat back.
In rows 2 and 3, take care to fasten the correct seat belt in the correct buckle. Do not invert the seat belt or the buckle of the side seats with the buckle or the seat belt of the centre seat.
4
Airbags
Airbags only operate when the ignition is switched on.
This equipment only operates once. If a second impact occurs (during the same or a subsequent accident), the airbag will not operate.
The triggering of an airbag or airbags is accompanied by a slight discharge of harmless smoke and a noise, due to the activation of the pyrotechnic cartridge incorporated in the system.
This smoke is not harmful, but sensitive individuals may experience some irritation.
The noise of the detonation may result in a slight loss of hearing for a short time.
AIRBAGS
The airbags have been designed to maximise the safety of the occupants (with the exception of the centre seats of rows 2 and 3) in the event of a serious collision; they work in conjunction with the force limiting seat belts.
In the event of a serious collision, the electronic detectors record and analyse the front and side impacts suffered in the impact detection zones:
- in the event of a serious impact, the airbags inflate instantly and protect the occupants of the vehicle.
Immediately after the impact, the airbags deflate rapidly, so that they do not hinder the visibility of the occupants nor their possible exit from the vehicle.
- in the event of a minor or rear impact and in certain roll-over conditions, the airbags will not be deployed; the seat belt alone is sufficient to provide maximum protection in these situations.
The seriousness of the collision depends on the nature of the obstacle and the speed of the vehicle at the moment of impact.
It is imperative that the passenger airbag is disarmed if a child seat is installed facing rearwards. Refer to the
"Children on board" section of chapter 4.
4
Airbags
Good practice
Sit in a normal upright position.
Wear a correctly adjusted seat belt.
Do not leave anything between the occupants and the airbags (a child, pet, object...). This could hinder the operation of the airbags or injure the occupants.
After an accident or if the vehicle has been stolen or broken into, have the airbag systems checked.
All work on the airbag system is strictly forbidden unless it is carried out by qualified personnel at a CITROËN dealer or a qualified workshop.
Even if all of the precautions mentioned are observed, a risk of injury or of minor burns to the head, chest or arms when an airbag is deployed cannot be ruled out. In fact, the bag inflates almost instantly (within a few milliseconds) then deflates within the same time discharging the hot gas via openings provided for this purpose.
Lateral airbags
Only put recommended covers on the seats.
These will not hinder inflation of the lateral airbags. Contact a CITROËN dealer or a qualified workshop.
Do not fix or attach anything to the seat backs. This could cause injury to the chest or arms when the lateral airbag inflates.
Do not sit with the upper part of the body any nearer to the door than necessary.
Curtain airbags
Do not fix or glue anything to the roof. This could cause injury to the head when the curtain airbag inflates.
Do not remove the grab handles installed on the roof, they play a part in securing the curtain airbags.
Front airbags
Do not drive holding the steering wheel by its spokes or resting your hands on the centre part of the wheel.
Do not allow passengers to place their feet on the dashboard, they risk serious injury if the airbag is deployed.
Smoke as little as possible as deployment of the airbags can cause burns or the risk of injury from a cigarette or pipe.
Never remove or pierce the steering wheel or hit it violently.
Airbags
Operating fault
If this warning lamp comes on in the instrument panel, accompanied by an audible signal and a message in the screen, contact a CITROËN dealer or a qualified workshop to have the system checked. The airbags may no longer be deployed in the event of a serious impact.
Lateral airbags
If fitted on your vehicle, this is a system which protects the driver and front passenger in the event of a serious side impact in order to limit the risk of injury to the chest.
Each lateral airbag is fitted in the front seat back frame, on the door side.
Deployment
It is deployed unilaterally in the event of a serious side impact applied to all or part of the side impact zone B , perpendicular to the longitudinal centreline of the vehicle on a horizontal plane and directed from the outside towards the inside of the vehicle.
The lateral airbag inflates between the front occupant of the vehicle and the corresponding door trim panel.
Impact detection zones
A.
Front impact zone.
B.
Side impact zone.
In the event of a minor impact or bump on the side of the vehicle or if the vehicle rolls over, the airbag may not be deployed.
The airbag is not deployed in the event of a rear or front collision.
Curtain airbags
This is a system which protects the driver and passengers (with the exception of the centre seats of rows 2 and 3) in the event of a serious side impact in order to limit the risk of head injuries.
Each curtain airbag is incorporated in the pillars and the upper part of the passenger compartment.
Activation
It is triggered at the same time as the corresponding side airbag in the event of a serious side impact applied to all or part of the side impact zone B , perpendicular to the longitudinal centreline of the vehicle on a horizontal plane and directed from the outside towards the inside of the vehicle.
The curtain airbag inflates between the front or rear occupant of the vehicle and the windows.
4
Airbags
To ensure the safety of your child, it is essential to deactivate the passengers airbag when you install a rear-facing child seat on the front passenger seat. Otherwise, the child would risk being killed or seriously injured if the airbag were to inflate.
Front airbags
The front airbags are fitted in the centre of the steering wheel for the driver and in the dashboard for the front passenger.
Deployment
They are deployed simultaneously, unless the passenger's front airbag has been deactivated, in the event of a serious front impact applied to all or part of the front impact zone A in the longitudinal centreline of the vehicle on a horizontal plane directed from the front towards the rear of the vehicle.
The front airbag inflates between the front occupant of the vehicle and the dashboard to cushion their forward movement.
Deactivating
The passenger's front airbag alone can be deactivated:
- With the ignition switched off , insert the key into the passenger's airbag deactivation switch,
- turn it to the "OFF" position,
- then remove the key keeping the switch in the new position.
The airbag warning lamp in the instrument panel is on while the airbag is deactivated.
Reactivation
In the "OFF" position, the passenger's airbag will not be deployed in the event of an impact.
As soon as the child seat is removed, turn the airbag switch to the "ON" position to reactivate the airbag and thus ensure the safety of your passenger in the event of an impact.
Front airbag fault
If this warning lamp comes on, accompanied by an audible signal and a message in the screen, contact a CITROËN dealer or a qualified workshop to have the system checked.
If the two airbag warning lamps are on continuously, do not install a rear-facing child seat. Contact a CITROËN or a qualified workshop.
Child safety
GENERAL POINTS RELATING TO
CHILD SEATS
Although one of CITROËN's main criteria when designing your vehicle, the safety of your children also depends on you.
For maximum safety, please follow these precautions:
- all children under the age of 12 or less than one metre fifty tall must travel in approved child seats suited to their weight, on seats fitted with a seat belt or
ISOFIX mountings.
- statistically, the safest seats in your vehicle for the transportation of children are the rear seats,
- a child weighing less than 9 kg must travel in the "rearwards-facing" position both in the front and in the rear,
- the passenger must not travel with a child on his lap.
CHILD SEAT IN THE FRONT
"Rearwards-facing"
Recommended on the rear seats up to the age of 2.
When a "rearwards-facing" child seat is installed on the front passenger seat, it is essential that the passenger air bag is disarmed. Otherwise, the child would risk being seriously injured or killed if the air bag were to inflate.
"Forwards-facing"
Recommended on the rear seats over the age of 2.
When a "forwards-facing" child seat is installed on the front passenger seat, leave the passenger air bag armed.
The rules for carrying children are specific to each country. Consult the current legislation in your country.
Please consult the list of seats approved in your country. The Isofix mountings, the rear seats, the passenger airbag and the deactivation of this airbag depend on the version sold.
4
Child safety
Passenger airbag OFF
The child seats function and the passenger air bag disarming function are common to the entire CITROËN range.
If the passenger air bag is not disarmed, the installation of a "rearwards-facing" child seat in the front is strictly prohibited.
Refer to the advice given on the label present on both sides of the passenger's sun visor.
Refer to chapter 4, "Air bags" section. To assure the safety of your child, you must deactivate the passenger's front airbag when you install a child seat in the rearwards facing position on the front passenger's seat.
Otherwise, there is a risk that the child could be seriously injured or killed if the airbag were deployed.
The mountings comprise three rings for each seat:
- two front rings, located between the vehicle seat back and cushion, indicated by a label,
- a rear ring, for securing the upper strap referred to as the TOP TETHER, indicated by another label.
This ISOFIX mounting system guarantees you fast, reliable and safe fitting of the child seat in your vehicle.
The ISOFIX child seats are fitted with two locks which are secured easily on the two front rings.
Some also have an upper strap which is attached to the rear ring.
"ISOFIX" MOUNTINGS
Your vehicle has been approved in accordance with the new ISOFIX regulation.
If fitted on your vehicle, the regulation
ISOFIX mountings are located by labels.
To attach this strap, raise the vehicle seat's head restraint then pass the hook between its rods. Then fix the hook on the rear ring and tighten the upper strap.
The incorrect installation of a child seat in a vehicle compromises the child's protection in the event of an accident.
For information regarding the ISOFIX child seats which can be installed in your vehicle, consult the summary table for the location of the ISOFIX child seats.
Child safety
4
Child safety
ISOFIX CHILD SEAT RECOMMENDED BY CITROËN AND APPROVED FOR YOUR VEHICLE
ISOFIX RÖMER Duo Plus
(size category B1 )
Group 1: from 9 to 18 kg
Installed in the forward facing position.
Fitted with an upper strap to be secured on the ISOFIX upper ring, referred to as the TOP TETHER.
Three seat body angles: sitting, reclining, lying.
This child seat can also be used on seats which are not fitted with ISOFIX mountings.
In this case, it must be attached to the vehicle seat using the three point seat belt.
Follow the instructions for fitting the child seat given in the seat manufacturer's installation guide.
Child safety
SUMMARY TABLE FOR THE INSTALLATION OF ISOFIX CHILD SEATS
This table indicates the options for the installation of ISOFIX child seats on the vehicle seats fitted with ISOFIX mountings.
In the case of the universal and semi-universal ISOFIX child seats, the child seat's ISOFIX size category, determined by a letter from A to G , is indicated on the child seat next to the ISOFIX logo.
Type of ISOFIX child seat
ISOFIX size category
Row 2 rear side seats with individual seats in Row 1
Row 2 rear side seats with 2-seat bench in Row 1
Rear seats in Row 3
Weight of the child /indicative age
Less than
10 kg
(group 0)
Up to 6 months approx
Less than 10 kg
(group 0)
Less than 13 kg
(group 0+)
Up to 1 year approx
Infant car seat
"rear facing"
From 9 to 18 kg
(group 1)
From 1 to 3 years approx
"rear facing" "forward facing"
F G C D E C D A B B1
IL-SU
IL-SU
IL-SU
X
X
IL-SU
IL-SU
IL-SU
X
X
IL-SU
IL-SU
IL-SU
IUF, IL-SU
IUF, IL-SU
IUF, IL-SU
IUF: Seat suitable for the installation of an
ISOFIX child seat of the universal category.
"Forward facing" ISOFIX child seat fitted with an upper strap secured to the upper ring of the vehicle seats equipped with
ISOFIX mountings.
IL-SU: Seat suitable for the installation of a semi-universal ISOFIX child seat. "Forward facing" ISOFIX child seat fitted with a stay.
"Rear facing" ISOFIX child seat or infant car seat, fitted with an upper strap or a stay.
X: No restraining system for children.
Infant car seat: this is fixed to the lower rings of a seat equipped with ISOFIX mountings and occupies two rear seats. 4
Child safety
CHILD SEATS RECOMMENDED BY CITROËN
CITROËN offers a complete range of recommended child seats which are secured using a three point seat belt :
Group 0+: from birth to 13 kg
L1
"ROMER Baby-Safe Plus"
Installed in the rear-facing position.
Groups 2 and 3: from 15 to 36 kg
L3
"RECARO Start''
L4
"KLIPPAN Optima"
From the age of 6 years
(approximately 22 kg), the booster is used on its own.
L5
"RÖMER KIDFIX"
Can be fixed on the vehicle's ISOFIX mountings.
The child is restrained by the seat belt.
Child safety
This table indicates the options for installing child seats secured using a seat belt and universally approved in accordance with the weight of the child and the seat in the vehicle.
Row 1 (b)
Seat
Individual seat
Bench, side seat
Bench, centre seat
Under 13 kg
(groups 0 (a) and 0+)
Up to approx 1 year
Weight of the child and indicative age
From 9 to 18 kg
(group 1)
1 to 3 years approx
From 15 to 25 kg
(group 2)
3 to 6 years approx
From 22 to 36 kg
(group 3)
6 to 10 years approx
U U U U
U
L1
U
L2
U
L2, L3, L4
U
L2, L3, L4
Side seats U U U U
Row 2
Centre seat
Side seats
U
U
U
U
U
U
U
U
Row 3
Centre seat U U U U
a: Group 0: from birth to 13 kg. Infant car seats and "car cots" cannot be installed on the front passenger seat.
b: consult the legislation in force in your country before installing your child on this seat.
U: seat suitable for the installation of a child seat secured using a seat belt and universally approved, "rear facing" and/or
"forward facing".
4
Child safety
ADVICE ON CHILD SEATS
The incorrect installation of a child seat in a vehicle compromises the child's protection in the event of an accident.
Deactivate the passenger airbag when a
"rear facing" child seat is installed on the front seat.
Otherwise, the child would risk being seriously injured or killed if the airbag were to inflate.
Remember to fasten the seat belts or the child seat harnesses keeping the slack in relation to the child's body to a minimum , even for short journeys.
For optimum installation of the "forward facing" child seat, ensure that the back of the child seat is in contact with the back of the vehicle's seat and that the head restraint does not cause any discomfort.
As a safety precaution, do not leave:
- one or more children alone and unsupervised in a vehicle,
- a child or an animal in a vehicle which is exposed to the sun, with the windows closed,
- the keys within reach of children inside the vehicle.
To prevent accidental opening of the doors, use the "Child Lock".
If the head restraint has to be removed, ensure that it is stored or attached securely to prevent it from being thrown around the vehicle in the event of sharp braking.
Take care not to open the rear windows by more than one third.
To protect young children from the rays of the sun, fit side blinds to the rear windows.
Children under the age of 10 must not travel in the "forward facing" position on the front passenger seat, unless the rear seats are already occupied by other children, cannot be used or are absent.
Installing a booster seat
The chest part of the seat belt must be positioned on the child's shoulder without touching the neck.
Ensure that the lap part of the seat belt passes correctly over the child's thighs.
CITROËN recommends the use of a booster seat which has a back, fitted with a seat belt guide at shoulder level.
Towing a trailer
TOWING A TRAILER, CARAVAN, BOAT, ETC...
For more information about weights, refer to the administrative documents
(V5 registration document, ...) or to the
"Weights" section of chapter 8.
Driving advice
A towed vehicle must free wheel: gearbox in neutral.
Distribution of loads
Distribute the load in the trailer so that the heaviest objects are as close as possible to the axle and the nose weight is close to the maximum authorised without, however, exceeding it.
Cooling
Towing a trailer on a slope increases the coolant temperature.
As the fan is electrically controlled, its cooling capacity is not dependent on the engine speed.
5
Towing a trailer
On the contrary, use a high gear to lower the engine speed and reduce your speed.
In all cases, pay attention to the coolant temperature.
Good Practice
In certain cases of particularly arduous use (towing the maximum load up a steep slope in high temperatures), the engine automatically limits its power. In this case, the air conditioning is automatically cut off to save engine power.
If the coolant temperature warning lamp comes on, stop the vehicle and switch off the engine as soon as possible.
Tyres
Check the tyre pressures of the towing vehicle (see the "Identification markings" section of chapter 8) and of the trailer, observing the recommended pressures.
Brakes
Towing increases the braking distance. Drive at a moderate speed, change down early and brake gradually.
Side wind
Sensitivity to side wind is increased. Drive smoothly and at a moderate speed.
ABS/ESP
The ABS or ESP systems only control the vehicle, not the trailer or caravan.
Towbar
We recommend the use of genuine
CITROËN towbars and their harnesses, which have been tested and approved from the design stage of your vehicle, and that you entrust the fitting of this equipment to a CITROËN dealer.
If this equipment is not fitted by a CITROËN dealer, it is imperative that it is fitted using the electrical pre-equipment installed at the rear of the vehicle and in accordance with the manufacturer's instructions.
In accordance with the general instructions a reminder of which has been given above, we draw your attention to the risk associated with fitting a towbar or electrical accessory not recommended by CITROËN. Fitting such equipment could result in the failure of your vehicle's electronic system. Please obtain information from the Manufacturer before fitting this type of equipment.
See the "Levels" section of chapter 6.
Rear parking sensors
The parking sensors system does not function while the vehicle is towing.
OTHER ACCESSORIES
For any work on your vehicle, use a qualified workshop that has the technical information, competence and equipment required, which a CITROËN dealer is able to provide.
This range is also available, structured around comfort, leisure and maintenance:
Anti-theft alarm, window engraving, first aid kit, high visibility safety jacket, rear parking assistance, warning triangle, ...
Front seat covers compatible with airbags, benches, rubber mats, carpet mats, boot tray, roof bars, side blinds, snow chains.
To prevent the mat from becoming caught under the pedals:
- ensure that the mat and its fixings are positioned correctly,
- never fit one mat on top of another.
Audio equipment, hands-free kit, speakers,
CD changer, navigation, ...
Regardless of the audio and telematic equipment offered on the market, the technical constraints linked with the fitting of equipment of these families of products mean that the special features of the equipment and its compatibility with the capacities of your vehicle's standard equipment must be taken into account.
Please contact a dealer for information before fitting such equipment.
Installation of radiocommunication transmitters
Before installing accessory radiocommunication transmitters with an external aerial on your vehicle, you are advised to contact a representative of the
CITROËN marque.
The CITROËN Network will inform you of the specifications (frequency band, maximum output power, aerial position, specific installation conditions) of the transmitters which can be fitted, in accordance with the Motor Vehicle
Electromagnetic Compatibility Directive
(2004/104/CE).
Equipment
Trims (except for 163 hp engine), front mud flaps, rear mud flaps, spoilers, sill, ...
Screenwash, replacement fuses, wiper blades, interior and exterior cleaning and maintenance products, replacement bulbs, ...
The fitting of electrical equipment or accessories which are not recommended by CITROËN may result in a failure of your vehicle's electronic system.
Please note this specific warning. You are advised to contact a representative of the Marque to be shown the range of recommended equipment and accessories.
Depending on the country in which the vehicle is sold or operated, it is compulsory to have a high visibility safety jacket, warning triangle and replacement bulbs available in the vehicle.
5
Opening the bonnet
OPENING THE BONNET
From inside:
- lift the cover located at the foot of the front left seat.
- pull the control upwards.
From outside: partially open the bonnet, lift the catch and raise the bonnet.
Bonnet strut
Secure the strut in one of the two notches, according to the height required, to hold the bonnet open.
Before closing the bonnet, replace the strut in its housing.
To close
Lower the bonnet and release it at the end of its travel. Check that the bonnet is properly locked.
"Bonnet open" warning
This warning is linked to the alarm option only.
With the engine running or the vehicle moving, a warning light and a diagram on the display, accompanied by an audible signal, warn you that the bonnet is not properly closed.
Under the bonnet
UNDER THE BONNET
DIESEL ENGINES
1 Windscreen/headlamp wash reservoir.
2 - Fuse box.
3 Coolant reservoir.
4 Brake and clutch fluid reservoir.
5 Air filter.
6 Dipstick.
7 Engine oil filler cap.
8 Power steering reservoir.
9 Removable towing eye.
10 - Repriming pump ( a : 1.6 litre HDi; b : 2 litre HDi).
11 Engine oil filling funnel (2 litre HDi).
7.1 Engine oil filler cap.
If your vehicle is fitted with this oil filler tube, proceed as follows:
A Remove the oil filler cap.
B Remove the filler tube from its location.
C Place the filler tube in the filler opening as shown on the illustration.
D Turn it a 1/4 of a turn to the left to lock it then top up the oil.
To refit, proceed in the reverse order without forgetting to retighten the cap A correctly.
6
Under the bonnet
PETROL ENGINE
1.
Windscreen/headlamp wash reservoir.
2.
Fuse
3.
Coolant
4.
Brake and clutch fluid reservoir.
5.
Air
6.
Dipstick.
7.
Engine oil filler cap.
8.
Power steering reservoir.
9.
Removable towing eye.
Levels
LEVELS
These regular maintenance operations will keep your vehicle in good running order. Consult the instructions at CITROËN dealerships or in the servicing booklet enclosed in the handbook pack.
If you have to remove/refit the engine style cover, handle it with care to avoid damaging the fixing clips.
Check the level regularly and top up between changes.
Check the level with the vehicle level, engine cold, using the dipstick.
Dipstick
There are two marks on the dipstick:
A = maximum
If you fill past this mark, contact a CITROËN dealer or a qualified workshop.
B = minimum
Never allow the level to fall below this mark.
To maintain the reliability of engines and emission control systems, the use of additives in engine oil is prohibited.
Oil change
It is imperative that this is carried out at the intervals specified and the viscosity grade of the oil selected must fulfil the requirements in accordance with the manufacturer's servicing schedule. Ask for advice from a
CITROËN dealer.
Remove the dipstick before filling.
For the 2 litre HDi engine, use the funnel supplied when filling via the sump opening.
Check the level after filling (never exceed the max mark).
Screw the cap back onto the sump before closing the bonnet.
Viscosity selection
In all cases, the oil selected must meet the manufacturer's requirements.
Changing the brake fluid
The brake fluid must be changed at the intervals stated, according to the manufacturer's servicing schedule.
Use fluids recommended by the manufacturer, which fulfil DOT4 standards.
The level must be between the MIN and
MAX marks on the reservoir.
If fluid has to be added frequently, this indicates a fault which must be checked by a
CITROËN dealer or a qualified workshop as soon as possible.
Warning lamps
Checking by means of the warning lamps in the instrument panel is described in chapter 2, refer to the
"Instruments and controls" section. 6
Levels
Cooling system
Only use the fluid recommended by the manufacturer.
Otherwise, you risk seriously damaging your engine.
When the engine is warm, the temperature of the coolant is controlled by the engine fan. As this fan can operate with the ignition key removed and because the cooling system is pressurised, wait for at least one hour after the engine has stopped before carrying out any work.
Slacken the cap by 1/4 of a turn to release the pressure to prevent any risk of scalding.
When the pressure has dropped, remove the cap and top up the level with coolant.
If fluid has to be added frequently, this indicates a fault which must be checked by a
CITROËN dealer or a qualified workshop as soon as possible.
The vehicle must be parked on level ground with the engine cold. Unscrew the cap integrated with the gauge and check the level which must be between the MIN and
MAX marks.
Screenwash and headlamp wash level
For best quality cleaning and for your safety, we would advise that you use products of the CITROËN range.
Capacity of the screenwash reservoir: approximately 4.5 litres.
If your vehicle is fitted with headlamp washers, the capacity of the reservoir is
7.5 litres.
To ensure optimum cleaning and prevent freezing, this fluid must not be topped up or replaced with plain water.
Diesel additive level (Diesel with particle emission filter)
The minimum level of this additive is indicated by lighting of the service warning light, accompanied by an audible signal and a message in the screen.
When this occurs with the engine running it is due to the start of saturation of the particle emission filter (exceptionally prolonged urban type driving conditions: low speed, long traffic jams, ...).
In order to regenerate the filter, you are advised to drive at a speed higher than
40 mph (60 km/h) for at least five minutes as soon as possible, when traffic conditions permit (until the message disappears and the service warning lamp goes off).
During regeneration of the particle emission filter, relay noise may be heard under the dashboard.
If the message is still displayed and if the service warning lamp remains on, contact a CITROËN dealer or a qualified workshop.
Topping up
The level must be between the MIN and
MAX marks on the expansion bottle. If more than 1 litre of fluid is required to top up the level, have the system checked by a
CITROËN dealer or a qualified workshop.
Topping up
This additive must be topped up by a
CITROËN dealer or a qualified workshop without delay.
CHECKS
Battery
At the start of winter, have your battery checked by a CITROËN dealer or a qualified workshop.
Brake pads
Brake pad wear depends on the style of driving, in particular for vehicles which are used in town, over short distances. It may be necessary to check the thickness of the pads, even between services.
Unless there is a leak in the system, a drop in the brake fluid level indicates that the brake pads are worn.
Brake disc/drum wear
For any information on checking the brake disc/drum wear, contact a CITROËN dealer or a qualified workshop.
Parking brake
Where the parking brake travel is too great or there is a reduction in the performance of the system, the parking brake should be adjusted, even between services.
Have the system checked by a CITROËN dealer or a qualified workshop.
Checks
Oil filter
Change the filter regularly, in accordance with the servicing schedule.
Carbon filter and passenger compartment filter
The carbon filter permits continuous and effective filtering of dust.
If the passenger compartment filter becomes clogged, this may reduce the performance of the air conditioning system and generate unpleasant odours.
We recommend the use of a combined passenger compartment filter. By means of its second special active filter, it contributes to the purification of the air breathed by the occupants and the cleanness of the passenger compartment (reduction of allergic symptoms, unpleasant odours and greasy deposits).
Refer to the servicing booklet to find out the replacement interval for these components.
Depending on the environment (dusty atmosphere...) and the use of the vehicle (urban driving...), change them twice as often if necessary.
Refer to "Under the bonnet" in section 6.
This filter actively contributes to the preservation of air quality by trapping unburnt polluting particles. It is controlled completely and automatically by the engine management system.
This warning lamp comes on if there is a risk of blockage of the filter.
This alert signals the start of saturation of the particle emissions filter (exceptionally prolonged driving in urban conditions: reduced speed, traffic jams…).
If this alert persists, contact a CITROËN dealer or a qualified workshop.
On acceleration after the vehicle has been running for a prolonged period at very low speed or at idle, you may, in exceptional circumstances, notice the emission of water vapour at the exhaust. This water vapour does not have any adverse effect on vehicle handling or the environment.
To regenerate the filter, it is recommended that as soon as driving conditions permit, you drive at a speed of at least 36 mph
(60 km/h) for at least 5 minutes (until the warning lamp goes off and/or the message disappears).
6
Checks
During this regeneration, you may notice that the idling speed is higher than normal and that the cooling fan is running. As operation of the exhaust emissions controls may cause the exhaust gas temperature to reach very high levels, it is recommended that you do not stop the vehicle over easily inflammable surfaces (dry grass and leaves, pine needles, edge of a meadow or forest).
1.6 litre HDi
Bleeding the water contained in the
Diesel filter
If this warning lamp comes on, bleed the filter. Otherwise bleed regularly each time the engine oil is changed.
To evacuate the water, unscrew the bleed screw located on the end of the transparent pipe.
Operate until all of the water in the transparent pipe has been drained out then tighten the bleed screw.
HDi engines use advanced technology.
Contact a CITROËN or a qualified workshop for all work on the system.
2 litre HDi
Manual gearbox
Have the level checked in accordance with the manufacturer's servicing schedule.
To check the main levels and certain components, in accordance with the manufacturer's servicing schedule, refer to the pages of the servicing booklet which correspond to your vehicle's engine.
Only use products recommended by
CITROËN or products of equivalent quality and specification.
In order to optimise the operation of units as important as the braking system, CITROËN selects and offers specific products.
In order to avoid damaging the electrical units, high pressure washing to clean the engine compartment is strictly prohibited.
Innovation in the search for performance
For over 40 year, the TOTAL Research and
Development departments have developed for CITROËN, lubricants to match the latest technical innovations on CITROËN vehicles, both for competition and for everyday motoring.
For you, this is an assurance that you will obtain of the best performance for your engine.
Optimum protection for your engine
By having your CITROËN vehicle serviced with TOTAL lubricants, you are contributing towards improving the life and performances of your engine, while also protecting the environment. prefers
Fuel
Filling with fuel
The fuel tank must be filled with the engine off .
When filling with fuel, do not open the left-hand side door, if fitted on your vehicle, as there is a risk of damage to the fuel filler flap.
You can lock this door using the electric child lock. Refer to the
"Accesses" section of chapter 2.
It is normal to hear an air intake noise when the cap is opened as there is a vacuum linked with the sealing of the fuel circuit.
A label affixed to the inside of the flap reminds you of the type of fuel to be used.
More than 8 litres of fuel must be added in order to be registered by the fuel gauge.
When filling the fuel tank, do not continue after the 3 rd cut-off of the nozzle. This could cause malfunctions.
FILLING WITH FUEL
Low fuel level
When this warning light fi rst comes on and when the needle is at the start of the red zone, the minimum fuel tank level has been reached.
At this moment, you have approximately
8 litres of fuel remaining.
Fill up without delay to avoid running out of fuel.
Never continue to drive until you run out of fuel as this may damage the emission control and injection systems.
- Open the fuel filler flap.
Insert the key, then turn it a quarter turn.
- Remove the cap and hook it onto the clip located on the inside of the flap.
The capacity of the fuel tank is approximately 80 litres.
- After filling the fuel tank, lock the cap and close the flap.
Quality of the fuel used for Diesel engines
Quality of the fuel used for petrol engines
Fuel
FUEL CIRCUIT DISARMED
In a serious collision, a mechanism automatically prevents fuel from reaching the engine.
DIESEL
The Diesel engines are perfectly compatible with biofuels which conform to current and future European standards (Diesel fuel which complies with standard EN 590 mixed with a biofuel which complies with standard EN 14214) available at the pumps
(containing up to 7 % Fatty Acid Methyl
Ester).
The B30 biofuel can be used in certain
Diesel engines; however, this use is subject to strict application of the special servicing conditions. Contact a CITROËN dealer or a qualified workshop.
The use of any other type of (bio)fuel
(vegetable or animal oils, pure or diluted, domestic fuel...) is strictly prohibited (risk of damage to the engine and fuel system).
The petrol engines are perfectly compatible with E10 or E24 type petrol biofuels
(containing 10 % or 24 % ethanol), conforming to European standards
EN 228 and EN 15376.
E85 type fuels (containing up to
85 % ethanol) are reserved exclusively for vehicles marketed for the use of this type of fuel (BioFlex vehicles). The quality of the ethanol must comply with European standard EN 15293.
For Brazil only, special vehicles are marketed to run on fuels containing up to
100 % ethanol (E100 type).
The flashing of this warning light is accompanied by a message on the display.
Check that there is no odour or leakage of fuel outside the vehicle and re-establish the fuel supply:
- switch off the ignition (STOP position),
- remove the key,
- put the key back in the ignition,
- switch on the ignition and start.
DIESEL REPRIMING PUMP
If you should run out of fuel, it is necessary to re-prime the circuit:
- fill the fuel tank with at least five litres of diesel,
- squeeze and release the manual re-priming pump, under the bonnet under the protective cover, until fuel appears in the transparent pipe,
- operate the starter until the engine starts.
6
Fuel
DIESEL PRIMING PUMP
If you should run out of fuel, it is necessary to prime the circuit:
- fill the fuel tank with at least five litres of diesel,
- open the bonnet,
- unclip the protective cover for access to the priming pump,
- place the cover to the right of the engine,
- place the two slots in the lugs behind the engine to allow the protective cover to be refitted,
If the engine does not start first time, do not keep trying.
Operate the priming pump again, then start the engine.
- firmly squeeze and release the manual priming pump until fuel stiffens the pipe,
- operate the starter until the engine starts,
- clip the protective cover in place,
- close the bonnet.
Battery
BATTERY
This is housed in a compartment located underneath the floor, in front of the front right seat.
To charge the battery using a battery charger
- Disconnect the battery,
- Follow the instructions for use given by the battery charger manufacturer,
- Reconnect starting with the negative (-) terminal,
- Check that the terminals and connectors are clean. If they are covered with sulphate (white or greenish deposit), disconnect them and clean them.
To start the vehicle from another battery
- Connect the red cable to the positive (+) terminals of the two batteries,
- Connect one end of the green or black cable to the negative (-) terminal of the slave battery,
- Connect the other end of the green or black cable to an earth point on the broken down vehicle as far as possible from the battery,
- Operate the starter, let the engine run,
- Wait for the engine to return to idle, then disconnect the cables.
After the engine has stopped, with the key in the ignition position, certain functions
(windscreen wiper, electric windows, courtesy lights, audio equipment, etc.) can only be used for a cumulative duration of thirty minutes, to prevent discharging of the battery.
It is advisable to disconnect the battery if the vehicle is not to be used for a period of more than one month.
Before disconnecting the battery, you must wait for 2 minutes after switching off the ignition.
Never disconnect a terminal when the engine is running.
Never charge a battery without first disconnecting the terminals.
After every reconnection of the battery, switch on the ignition and wait 1 minute before starting to allow the electronic systems to be initialised. If some problems persist after this operation, please contact a CITROËN dealer or a qualified workshop.
Once the thirty minutes are over, the active functions are put on standby and the battery warning light flashes accompanied by a message on the display.
To resume the use of these functions immediately, start the engine and let it run for a few minutes.
The time available will then be double the time for which the engine was left running.
However, this time will always be between five and thirty minutes.
A flat battery will prevent the engine from starting.
7
Repairing a wheel
Using the kit
- Switch off the ignition,
- affix the speed limitation sticker to the vehicle's steering wheel to remind you that a wheel is in temporary use,
- check that the switch A is at position " 0 ",
- connect the pipe of the bottle 1 to the valve of the tyre to be repaired,
- connect the compressor's electrical plug to the vehicle's 12 V socket,
- start the vehicle and let the engine run,
- switch on the compressor by pressing the switch A to position " 1 " until the tyre pressure reaches 2.0 bars.
- remove the compressor, unclip and store the bottle in a sealed bag to avoid staining your vehicle with traces of fluid,
- drive immediately, for approximately two miles (three kilometres), at reduced speed (between 12 and 37 mph (20 and
60 km/h)), to seal the puncture,
- stop to check the repair and the pressure,
PUNCTURE REPAIR KIT
The kit is located at the rear left of the vehicle.
The temporary tyre repair kit consists of a compressor and a cartridge (containing a sealant).
Vehicles supplied with a temporary puncture repair kit do not have a spare wheel or tooling (jack, wheelbrace, ...).
If, after approximately five to ten minutes, you are not able to obtain this pressure, the tyre cannot be repaired; contact a CITROËN dealer or a qualified workshop for roadside assistance.
- connect the compressor pipe directly to the valve of the repaired wheel.
- connect the compressor's electrical plug to the vehicle's 12 V socket again,
- start the vehicle again and let the engine run,
- adjust the pressure using the compressor (to inflate: switch A in position " 1 "; to deflate: switch A in position " 0 " and press button B ), in accordance with the vehicle's tyre pressure label (located on the door aperture, on the driver's side), then remember to check that the leak has been sealed correctly (no further loss of pressure after several miles
(kilometres)),
- remove the compressor, then stow the complete kit,
- drive at reduced speed (50 mph
(80 km/h) max) limiting the distance travelled to approximately 125 miles
(200 km),
- visit a CITROËN dealer or a qualified workshop as soon as possible to have the tyre repaired or replaced by a technician.
Repairing a wheel
Warning, the sealant cartridge contains ethylene-glycol, this product is harmful if swallowed and causes irritation to the eyes. Keep this product out of reach of children.
The expiry date of the sealant is indicated under the cartridge.
The cartridge is intended for a single use; once opened, it must be replaced.
After use, do not discard the cartridge into the environment, take it to a CITROËN dealer or to a specialised waste disposal site.
Do not forget to obtain a new sealant cartridge, available from a CITROËN dealer or a qualified workshop.
7
Changing a wheel
1. PARKING THE VEHICLE
- You must ensure that the occupants get out of the vehicle and wait in a safe location.
- If possible, park the vehicle on level, stable and non-slippery ground.
- Apply the parking brake, switch off the ignition and engage first or reverse gear.
- If available, place a chock under the wheel diagonally opposite the one to be changed.
CHANGING A WHEEL
If your vehicle is equipped with a spare wheel located underneath the vehicle, follow these instructions.
On certain types of ground and/or if heavy loads are being transported, the vehicle must be raised in order to disengage the spare wheel from the carrier. Call a
CITROËN dealer or a qualified workshop.
If your vehicle is fitted with suspension with pneumatic compensation, please deactivate the system. Refer to the "Rear suspension" section of chapter 3.
- If fitted on your vehicle, open the plastic flap located at the rear left of the vehicle.
- Unscrew the nut then take out the jack and the wheelbrace.
1.
Wheelbrace.
2.
Jack.
3.
Towing
The jack and the tool kit are specific to your vehicle. Do not use them for other purposes.
Changing a wheel
3. SPARE WHEEL
- Gain access to the spare wheel from the rear.
You can switch on the courtesy lamp to improve visibility.
- Open the cover, located on the sill, to access the carrier bolt.
- Detach the carrier from the hook and place the spare wheel near the wheel to be changed.
- Open the rear doors.
- Unscrew the bolt using the wheelbrace until the carrier is lowered fully.
7
Changing a wheel
4. OPERATING PROCEDURE
- Remove the trim pulling it using the towing eye.
- Loosen the wheel bolts and start unscrewing them.
- Place the jack in contact with the locating point provided, the one which is closest to the wheel to be changed.
Ensure that the jack is straight and that the base of the jack is fully in contact with the ground.
- Extend the jack to lift the wheel clear of the ground.
- Resume and complete the unscrewing of the wheel bolts.
- Remove the bolts and remove the wheel.
Do not extend the jack until you have started unscrewing the bolts on the wheel to be changed and have placed the chock under the wheel diagonally opposite.
Changing a wheel
5. FITTING THE SPARE WHEEL
- Position the wheel on the hub and start tightening the wheel bolts by hand.
- Carry out an initial tightening of the bolts using the wheelbrace.
- Lower the vehicle completely by folding the jack, then remove the jack.
- Tighten the bolts again using the wheelbrace, tighten them fully without forcing them.
- Place the wheel to be repaired in the carrier.
- Secure the carrier on the hook then raise the carrier using the bolt and the wheel brace. Check that the wheel and the carrier are flush against the floor of the vehicle.
- Remember to close the flap, located on the sill.
- Store the trim in the vehicle.
Never go underneath the vehicle when it is supported only by the jack.
Never use a screwdriver in place of the wheelbrace.
7
Snow screen
6. REFITTING THE REPAIRED
WHEEL
The wheel is refitted as described in step 5, not forgetting to refit the wheel trim.
Refer to the "Identification markings" section of chapter 8 to locate the tyre label.
The spare wheel is not designed to be used over long distances. Have the tightening of the bolts and the tyre pressure checked by a CITROËN dealer or a qualified workshop as soon as possible. Also, have the original wheel repaired and refitted by a
CITROËN dealer or a qualified workshop as soon as possible.
REMOVABLE SNOW SCREEN
According to country, the removable snow screen is installed on the lower part of the front bumper to prevent the accumulation of snow at the radiator cooling fan.
FITTING
- Offer up the snow screen facing its centring pin A on the front bumper.
- Put it in place by pressing at each clip B located in the four corners.
Do not forget to remove the snow screen when the exterior temperature is higher than 10 °C (no risk of snowfall) and when towing.
REMOVAL
- Pass a screwdriver into the hole located near each of the clips.
- Use the screwdriver as a lever to unclip the four clips B in turn.
CHANGING A BULB
TYPES OF BULB
Various types of bulb are installed on your vehicle. To remove them:
Changing a bulb
Type A
Entirely glass bulb: pull gently as it is fitted by pressure.
Type B
Bayonet bulb: press on the bulb then turn it anticlockwise.
Type C
Halogen bulb: release the retaining spring from its housing.
Halogen bulbs must be changed after the headlamp has been off for several minutes (risk of serious burns). Do not touch the bulb directly with your fingers, use lint-free cloths.
When each operation has been completed, check the operation of the lights.
7
Changing a bulb
FRONT LAMPS
Open the bonnet. To access the bulbs, reach behind the headlamp unit.
Carry out the operations in reverse order to refit each bulb.
1.
Dipped/Main beam headlamps
Type C , H4 - 55W
- Remove the centre cover by pulling the flexible rubber tab.
- Disconnect the electrical connector.
- Release the retaining spring.
- Change the bulb taking care to align the metal part with the slots in the lamp.
- Ensure that the cover is refitted correctly all the way round to ensure sealing.
2.
Sidelamps
Type A , W5W - 5W
- Remove the cover by pulling the flexible rubber tab.
- Remove the bulb holder fitted by pressure by pulling the connector.
- Change the bulb.
- Ensure that the cover is refitted correctly all the way round to ensure sealing.
3.
Direction indicators
Type B , PY21W - 21W (amber)
- Turn the bulb holder a quarter turn anticlockwise.
- Remove the bulb by pressing it lightly while turning it anticlockwise.
- Change the bulb.
4.
Foglamps
Type C , H1 - 55W
Contact a CITROËN dealer or a qualified workshop.
DIRECTION INDICATOR SIDE
REPEATER
Type A , WY5W (amber)
- Push the repeater towards the rear and disengage it.
- Support the connector and turn the bulb holder a quarter turn to the left.
- Turn the bulb a quarter turn to the left, remove it and change it.
- When refitting, engage the repeater towards the rear and bring it towards the front.
Front/Rear
Type A , 12 V 5W - 5W
- Unclip the lens by sliding a screwdriver in the slots on each side of the courtesy lamp.
- Pull the bulb and change it.
- Clip the lens in its housing and ensure that it is secured correctly.
Amber coloured bulbs (direction indicators and side repeaters) must be replaced with bulbs of identical specification and colour.
Changing a bulb
High pressure jet washing
When using this type of jet washer on stubborn dirt, do not persist on the headlamps, the lamps and their surrounds to avoid damaging their coating and seals.
7
Changing a bulb
REAR LIGHTS
For further information concerning the bulbs, refer to the "Types of bulb".
1.
Brake lights/side lights
Type B , P21/5W - 21/5W
- Identify the faulty bulb then open the rear doors to 180°. Refer to the
"Accesses" section of chapter 2.
- Remove the two fixing nuts.
Pull the lens block from the outside.
- Holding the light, disconnect the electrical connector.
2.
Direction indicators
Type B , PY21W - 21W (amber)
3.
Reversing lights
Type B , P21W - 21W
4.
Fog lamps
Type B , P21W - 21W
- Move aside the 8 tabs then extract the bulb holder.
- Remove the faulty bulb by pressing it lightly while turning it anticlockwise.
- Change the bulb.
When refitting, take care to correctly reposition:
- the 8 tabs,
- the two white lugs in the two rubber holes to maintain the sealing of the light,
- the supply wire to avoid trapping it.
Changing a bulb
NUMBER PLATE LIGHTS
Type A , W5W - 5W
THIRD BRAKE LIGHT
Type A , W5W - 5W
With tailgate
- Move aside the plastic lens using a screwdriver, on the point indicated by the arrow.
- Change the bulb.
- Replace the plastic lens and press on it.
Light located on the outside
(hinged doors)
- Unscrew the two screws using a Torx TM screwdriver with 20 socket.
- Remove the light.
- Change the bulb.
With hinged doors
- Unclip the interior trim.
- Disconnect the connector by moving aside its tab.
- Remove the plastic cover.
- Turn the bulb holder a quarter turn anticlockwise.
- Change the bulb.
Type B , P21W - 21W
Light located on the inside (tailgate)
- Unscrew the two screws using a Torx TM screwdriver with 20 socket.
- Remove the plastic cover.
- Remove the bulb holder moving aside the two tabs.
- Remove the faulty bulb by pressing it lightly while turning it anticlockwise.
- Change the bulb.
7
Changing a fuse
CHANGING A FUSE
The three fuseboxes are placed:
- in the dashboard on the right-hand side (behind the storage compartment, retractable),
- in the passenger compartment (battery compartment),
- under the bonnet.
The descriptions communicated are only the fuses which can be changed by the user.
For any other operations, go to a CITROËN dealer or a qualified workshop.
For motor trade: for complete fuse and relay information, consult the
"Procedures" wiring diagrams via the dealer network.
Removing and fitting a fuse
Before changing a fuse, the cause of the fault must be found and rectified.
Always replace a faulty fuse with a fuse of the same rating.
CITROËN will not accept responsibility for the cost incurred in repairing your vehicle or for rectifying malfunctions resulting from the installation of auxiliary accessories not supplied and not recommended by
CITROËN and not installed in accordance with its instructions, in particular when the combined consumption of all of the additional equipment connected exceeds
10 milliamperes.
RIGHT-HAND SIDE DASHBOARD
FUSES
- Tilt the storage compartment then pull it firmly to access the fuses.
13
14
15
16
17
9
10
11
12
Fuses
1
2
3
4
5
6
7
8
Changing a fuse
A (amps)
15
-
5
10
30
30
5
20
10
30
15
15
15
30
5
-
40
Allocation
Rear wiper
Free
Airbag control unit
Steering wheel angle sensor, Diagnostic socket, ESP sensor,
Manual ventilation, Clutch switch, Headlamp beam height,
Particle emission filter pump
Electric mirrors, Passenger electric window motor
Front electric windows supply
Courtesy lamps and glove box lamp
Multifunction screen, Anti-theft alarm siren, Audio equipment,
Compact disc changer, Audio/telephone, Trailer fusebox
(accessory)
Row 2 accessory socket
Rear ride height corrector, Steering wheel switching,
Instrument panel
Diagnostic socket, Ignition switch
Hands-free kit, Airbag control unit, Parking sensors control unit
Engine fusebox, Trailer fusebox
Rain sensor, Rear ventilation, Automatic air conditioning,
Instrument panel
Locking/unlocking/deadlocking
Free
Heated rear screen, Heated mirrors
7
Changing a fuse
PASSENGER COMPARTMENT
FUSES
- Unclip the battery compartment cover.
- Remove the red battery terminal (+).
When you have finished, close the cover carefully.
Fuses
4
36
37
38
39
1
2
3
40
A (amps)
30
20
40/50
-
15
10
20
10
5
Allocation
Heated seats
Row 3 12 V socket
Trailer fusebox (accessory)
Free
Hinged door locks
Hinged door locks
Hinged door rear wiper
Rear ventilation
Folding mirrors
FUSES UNDER THE BONNET
- After opening the bonnet, slide the screenwash support to make access easier.
- Unclip and tilt the box to access the fuses.
Fuses
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Changing a fuse
15
10
20
15
10
10
20
10
30
A (amps)
20
40
30
40
30
Allocation
Engine control unit, Fuel supply and air supply systems,
Fan assembly
Horn
Front and rear screenwash pump
Headlamp wash pump
Fuel supply system
Power steering, Secondary brake pedal switch
Braking system (ABS/ESP)
Starter motor control
Main brake pedal switch
Fuel supply and air supply systems, Emissions control systems
Front ventilation
Windscreen wipers
Built-in systems interface
Free
7
Changing a wiper blade
CHANGING A WINDSCREEN WIPER BLADE
Placing the wiper blades in the special position
- Less than a minute after switching off the ignition, press the wipers stalk downwards to position the wiper blades along the windscreen uprights
(special position).
Changing a front wiper blade
- Lift the wiper arm.
- Unclip the blade and remove it.
- Fit the new blade.
- Push back the wiper arm.
To return the windscreen wipers to their normal position, switch on the ignition and operate the wipers stalk.
Changing the rear wiper blade
- Lift the wiper arm, then unclip the blade and remove it.
- Fit the new blade and push back the wiper arm.
Having your vehicle towed
TOWING THE VEHICLE
Without lifting (4 wheels on the road)
You should always use a towing bar.
From the rear
- Unclip the cover using a coin or the flat part of the towing eye,
- Fully screw in the removable towing eye.
From the front
- Unclip the cover by pressing the bottom part.
- Fully screw in the removable towing eye.
Lifting (2 wheels on the road only)
It is preferable to raise the vehicle using professional lifting equipment.
Vehicles fitted with a manual gearbox (Diesel version)
In the case of vehicles fitted with a manual gearbox, the gear lever must be in the neutral position. Failure to observe this special condition may result in damage to certain braking components and the absence of braking assistance the next time the engine is started.
7
Having your vehicle towed
General recommendations
Observe the legislation in force in your country.
Ensure that the weight of the towing vehicle is higher than that of the towed vehicle.
The driver must stay at the wheel of the towed vehicle.
Driving on motorways and fast roads is prohibited when towing.
When towing a vehicle with all four wheels on the ground, always use an approved towing bar; rope and straps are prohibited.
When towing a vehicle with the engine off, there is no longer any power assistance for braking or steering.
In the following cases, you must always call on a professional recovery service:
- vehicle broken down on a motorway or fast road,
- when it is not possible to put the gearbox into neutral, unlock the steering, or release the parking brake,
- towing with only two wheels on the ground,
- where there is no approved towing bar available...
8
Dimensions
DIMENSIONS (MM)
The vehicle is available in 2 lengths (L1, L2) and 1 height (H1), refer to the tables:
L Overall length
H1
4 805 5 135
H Overall height pneumatic/metal suspension 1 895/1 942
A 3 122
B Front overhang 975
830 1 038 C Rear overhang
Overall width:
on panel
D with mouldings
with mirrors folded
with mirrors unfolded
E Width of front tracks
F Width of rear tracks
1 870
1 895
1 986
2 194
1 574
1 574
Turning circle pitch diameter between kerbs (m)
Maximum loads (kg)
Payload
On roof
12,18
1 000
170
12,59
Dimensions
8
Dimensions
N
O
Useful height
Useful width
L1
REAR DOORS (mm)
H1
1 272
1 237
L2
P
Q
Height
Width
Dimensions
L1
SLIDING SIDE DOOR (mm)
H1
1 203
924
L2
8
Weights
WEIGHTS AND TOWED LOADS (KG)
For further information, refer to your registration certificate.
In each country, it is imperative that the towed loads permitted by local legislation are complied with. To find out your vehicle's towing capabilities and its gross train weight, contact a CITROËN dealer.
Load transfer
If the towing vehicle has not reached the GVW, it is possible to transfer this weight to the trailer.
In all cases, do not exceed the weight of the trailer and the GTW, indicated on your registration certificate.
Comply with the towing capacities of your vehicle.
The weight of a braked trailer with load transfer can be increased on condition that the equivalent weight is removed from the vehicle and the GTW is not exceeded.
High ambient temperatures may result in a reduction in the performance of the vehicle to protect the engine. If the ambient temperature is above 37 °C, limit the towed load to 700 kg, without any transfer of load.
The speed of a towing vehicle must not exceed 60 mph (100 km/h) (comply with the legislation in force in your country).
ENGINES AND GEARBOXES
Cubic capacity (cc)
Bore x stroke (mm)
Power (hp)
EU standard maximum power (kW)
Max power engine speed (rpm)
EU standard max torque (Nm)
Max torque engine speed (rpm)
Catalytic converter
Particle emission filter
Gearbox
Diesel - Petrol engines
1.6 HDi 90
1 560
2.0 HDi 120
Diesel
2.0 HDi 120
PEF
1 997
75 x 88
90
66
4 000
85 x 88
120
88
4 000
180
1 750
Yes
No
Yes
No
300
2 000
Yes
Yes
2.0 HDi 136
PEF
1 997
85 x 88
136
100
4 000
320
2 000
Yes
Yes
Diesel
Manual
6
2.0 HDi 163
PEF
-
-
163
-
-
-
-
Yes
Yes
Diesel
Petrol
2.0 PETROL
140
1 997
85 x 88
138
103
6 000
180
2 500
-
/
Unleaded
6 5
For further information, consult the internet site at the address: http://service.citroen.com
8
Identification markings
IDENTIFICATION FEATURES
A. Manufacturer’s label.
1 - VF Type serial number.
2 - Gross vehicle weight (GVW).
3 - Gross train weight (GTW).
4.1 - Maximum weight on front axle.
4.2 - Maximum weight on rear axle.
B. Model serial number.
Use the flat end piece of the towing eye to open the flap.
C. Tyres and paint colour reference.
The label C , on the front door gives:
- the wheel and tyre sizes,
- the brands of tyres approved by the manufacturer,
- the tyre pressures (the tyre pressure must be checked when the tyre is cold, at least once a month),
- the paint colour reference.
EMERGENCY OR ASSISTANCE CALL
9.1
9
9.2
EMERGENCY OR ASSISTANCE CALL USING NAVIDRIVE
CITROËN
LOCALISED EMERGENCY CALL
Warning - the emergency call and the services are only active if the internal telephone is used with a valid SIM card. With a
Bluetooth telephone and without a SIM card, these services are not operational.
CITROËN
LOCALISED ASSISTANCE CALL
Press this button for access to CITROËN services.
In an emergency, press the SOS button until an audible signal is heard and a "Con fi rmation/Cancellation" screen is displayed (if valid SIM card inserted).
A call is made to the CITROËN Emergency team which receives locating information from the vehicle and can send a detailed alert to the relevant emergency services.
In countries in which the team is not operational, or when the locating service has been expressly declined, the call is sent to the emergency services (112).
If an impact is detected by the airbag control unit, and independently of the deployment of any airbags, an emergency call is made automatically.
The message "Deteriorated emergency call" associated with fl ashing of the orange indicator lamp indicates a malfunction. Contact a
CITROËN dealer. q any information about the CITROËN marque.
Customer call
Select "CITROËN Assistance" to make a roadside assistance call.
CITROËN Assistance j y p y y a CITROËN dealer. If you have purchased your vehicle outside the CITROËN dealer network, we invite you to have a dealer check the con fi guration of these services and, if desired, modi fi ed to suit your wishes.
The NaviDrive is coded in such a way that it will only p y vehicle, contact a CITROËN dealer for con fi guration of the system.
For safety reasons, it is imperative that the driver carries out operations which require prolonged attention while the vehicle is stationary.
When the engine is switched off and to prevent discharging of the battery, the NaviDrive may switch off after a few minutes.
NAVIDRIVE
MULTIMEDIA AUDIO/TELEPHONE SYSTEM
JUKEBOX FUNCTION (10 GB)/GPS (EUROPE)
CONTENTS
01 First steps
Voice commands and steering mounted controls
03 Screen and main menu
04 Navigation - Guidance
05 Traffic information
06 Audio/Video
07 Telephone
08 Trip computer
09 Configuration
10 Screen menu map p. p.
9.4
9.5
p. p. p. p. p. p. p. p.
9.7
9.11
9.21
9.23
9.32
9.36
9.38
9.39
9.3
01 FIRST STEPS
18
8
2
17
16
1 6
7
11
10
14
5
15
13
12
3
4
9
1. On/Off and Volume adjustment.
2. Selection of the source: radio, Jukebox,
CD and auxiliary (AUX, if activated on the
Con fi guration menu). Long press: CD copy to hard disk.
3. Audio option adjustments: front/rear, left/right balance, loudness, sound ambiences.
4. Display the list of local radio stations, of the tracks on the CD or of the MP3/USB/
Jukebox directories. Long press: update the local radio stations.
5. Automatic search for a lower/higher frequency. Selection of the previous/next CD,
MP3, USB or Jukebox track.
6. Selection of wavebands FM1, FM2, FMast,
AM.
7. TA fi c Announcement) function on/off.
Long press: access to the PTY (radio
Programme TYpes) mode.
8. Ejection of the CD.
9. SIM card slot.
10. Keypad for entering descriptions by successive presses.
11. Access to the "CITROËN" services menu.
12. Selection and con fi rmation.
13. Selection of the previous/next MP3/USB/
Jukebox directory.
14. Cancellation of the current operation. Long press: return to the current application.
15. Display the main menu.
16. Modi fi cation of the screen display. Long press: reinitialisation of the system.
17. Selection of the display on the screen between modes: TRIP, TEL, NAV and
AUDIO.
18. Long press on the SOS button: emergency call.
9.4
02 VOICE COMMANDS AND STEERING MOUNTED CONTROLS
RADIO: automatic search for a higher frequency.
CD/MP3/USB/JUKEBOX: selection of the next track.
CD/USB: continuous press: fast forwards play.
RADIO: selection of the next stored station.
MP3/USB/JUKEBOX: selection of the next folder.
Selection of the next item on a menu.
RADIO: selection of the previous stored station.
MP3/USB/JUKEBOX: selection of the previous folder.
Selection of the previous item on a menu.
Volume increase.
- Change of sound source.
- Con fi rmation of a selection. up/Hang up the telephone.
- Press for more than
2 seconds: access to the telephone menu.
Mute: by pressing the volume increase and decrease buttons simultaneously.
The sound is restored by pressing one of the two volume buttons.
Volume decrease.
RADIO: automatic search for a lower frequency.
CD/MP3/USB/JUKEBOX: selection of the previous track.
CD/USB: continuous press: fast backwards play.
9.5
9.6
1
2
02 VOICE COMMANDS AND STEERING MOUNTED CONTROLS
VOICE COMMANDS
DISPLAYING THE LIST AND USING THEM
To display the list of available voice commands, press the voice recognition control to start the voice recognition, then say HELP or the voice recognition command.
For the same operation, press and hold the MENU button and select the
"Voice commands list" function.
Voice commands list
Press the voice recognition control to start the voice recognition.
Say the words one by one and wait for the audible con fi rmation signal between each word.
The list which follows is exhaustive.
radio
LEVEL 1
cd player
Jukebox (if activated)
USB
LEVEL 2 memory autostore previous/next list
1 to 6/*
LEVEL 3 previous/next track track number/track scan random play directory (CD-MP3 inserted) list
"Pre-recorded description"
1 to 250/*
previous/next
repeat
help/what can I say/cancel
call/guide to
telephone last number voice box voice mail directory
message display read directory
"Pre-recorded description"
"Pre-recorded description"
*
destination
vehicle
navigation stop/resume zoom in/out view
traf fi c info display read
display audio telephone trip computer
Navigation air conditioning
previous/next
stop
delete
yes/no for all level 1 and 2
* help/what can I say/cancel for all level 1, 2 or *
03 SCREEN AND MAIN MENU
> COLOUR SCREEN
°
Orange
Telephone
Time:
Date:
This displays the following information, via the audio control panel:
- time,
- date, temperature a message),
- audio source displays (radio, CD, jukebox, ...),
- telematic system displays (telephone, services, ...),
- warning messages (e.g.: "Fuel level low") and vehicle function status messages (e.g.: "Auto lighting activated") displayed temporarily,
- trip computer information,
Screen con fi guration: refer to the section - Screen menu map.
The system uses the complete and detailed NAVTEQ maps installed directly on the equipment's hard disk.
Updates of the maps of the UK and of the other European countries, supplied by our partner NAVTEQ, are available from the CITROËN network.
9.7
03 SCREEN AND MAIN MENU
9.8
MAP: orientation, details, display.
NAVIGATION GUIDANCE:
GPS, stages, options.
VEHICLE DIAGNOSTICS: alert log, status of the functions.
TRAFFIC INFORMATION:
TMC information, messages.
AUDIO FUNCTIONS: radio,
CD, Jukebox, options.
For maintenance of the screen, the use of a soft, non-abrasive cloth
(spectacles cloth) is recommended without any additional product.
VIDEO: activation, parameters.
TELEMATIC: telephone, directory, SMS.
CONFIGURATION: vehicle, display, time, languages, voice, auxiliary socket (AUX) parameters.
Long press on MENU: help.
03 SCREEN AND MAIN MENU
DISPLAY ACCORDING TO
THE CONTEXT
Press the OK dial to access short-cut menus according to the display on the screen.
NAVIGATION (IF NAVIGATION IS IN PROGRESS):
1 resume/stop guidance
1 divert route
1 route type
1 consult traf fi c info
1 zoom/scroll map
IN "ZOOM/SCROLL" MODE
1 position info
1 select as destination
1 select as stage
1 store this position
1 exit map mode
1 guidance option
INTERNAL TELEPHONE
1 call list
1 dial
1 phone book
1 voice mail
BLUETOOTH TELEPHONE
1 call list
1 call
1 phone book
1 private mode/hands-free mode
1 place call on hold/resume call
VEHICLE DIAGNOSTICS
1 alert log
1 status of functions
9.9
03 SCREEN AND MAIN MENU
CD (MP3 OR AUDIO)
1 copy CD to JBX/stop copy
1 activate/deactivate Introscan
1 activate/deactivate random play
1 activate/deactivate repeat
RADIO
1 enter a frequency
1 activate/deactivate RDS
1 activate/deactivate REG mode
1 hide/display "Radio Text"
9.10
JUKEBOX
1 select playlist
1 activate/deactivate Introscan
1 activate/deactivate random play
1 activate/deactivate repeat
USB
1 copy USB to JBX/stop copy
1 eject USB
1 activate/deactivate Introscan
1 activate/deactivate random play
1 activate/deactivate repeat
4
3
2
04 NAVIGATION - GUIDANCE
SELECTING A DESTINATION
Tip: for a detailed global view of the menus available, refer to the
"Screen menu map" part of this section.
5
Press the MENU button.
Press the dial to con fi rm the selection.
6
Turn the dial and select the Navigation
Guidance function.
Turn the dial and select the "Enter an address" function.
Enter an address
7
Press the dial to con fi rm the selection. Press the dial to con fi rm the selection.
8
Turn the dial and select the
"Destination choice" function.
Destination choice
When the country has been selected, turn the dial and select the "Town" function.
Town
9.11
04 NAVIGATION - GUIDANCE
9
10
Press the dial to con fi rm the selection.
Turn the dial and select the letters of the town one by one con fi rming each time by pressing the dial.
Paris
11
9.12
To speed up the process, the "Post code" can be entered instead of the name of the "Town".
Use the alphanumeric keypad to enter the letters and digits and "*" to correct (limit of 5 characters).
Turn the dial and select OK.
OK
12
Press the dial to con fi rm the selection.
13
Repeat steps 8 to 12 for the "Road" and "N°" functions.
14 Select "OK" on the "Enter an address" page.
OK
15
Press the dial to con fi rm the selection.
Select the "Store" function to record the address entered in a directory record and press the dial to con fi rm the selection.
The points of interest (POI) indicate all of the service locations in the vicinity (hotels, various businesses, airports, ...).
Store POI
5
3
4
1
2
04 NAVIGATION - GUIDANCE
ADDING A STAGE
6
During guidance, press the MENU button.
Turn the dial and select the "Navigation guidance" function.
7
Press the dial to con fi rm the selection.
Turn the dial and select the "Journey legs and route" function.
Journey legs and route
Press the dial to con fi rm the selection.
8
9
Select the "Add a stage" function
(9 stages maximum) and press the dial to con fi rm.
Add a stage
Enter for example a new address.
Enter an address
When the new address has been entered, select "OK" and press the dial to con fi rm.
Select OK and press the dial to con fi rm the order of the stages.
Select "Strict" (the stage must be completed in order to continue to the next destination) or "Proximity" then press the dial to con fi rm.
9.13
9.14
4
3
1
2
04
GUIDANCE SPEECH SYNTHESIS
The volume of the Risk Areas POI alerts can only be adjusted during the alert using the volume adjustment control.
During announcements, the volume of each speech synthesis function (guidance, traf fi c information...) can be adjusted directly using the volume adjustment control.
Press the MENU button.
Turn the dial and select the "Navigation guidance" function.
5
6
7
Press the dial to con fi rm the selection.
Turn the dial and select the "Guidance options" function.
Guidance options
8
Press the dial to con fi rm the selection.
Select the "Adjust speech synthesis" function and press the dial to con fi rm.
Adjust speech synthesis
Press the dial then adjust the volume of the speech synthesis or select the
"Deactivate" function and press the dial to con fi rm.
Deactivate
Select "OK" and press the dial to con fi rm.
OK
04
List of POI
9.15
9.16
04 NAVIGATION - GUIDANCE
UPDATING THE RISK AREAS POIs
(Speed camera information)
DISPLAYING RISK AREAS POIs
1
The detailed procedure is available from CITROËN dealers. Press the MENU button.
2
3
4
5
Select "Map" and con fi rm by pressing "OK".
Map
Select "Map details" and con fi rm by pressing "OK".
Map details
Select "Transport and automobiles" and con fi rm by pressing "OK".
Transport and automobiles
Select "Risk areas" and con fi rm by pressing "OK".
Risk areas
4
3
2
1
04 NAVIGATION - GUIDANCE
GUIDANCE OPTIONS
The route presented depends directly on the guidance options.
Changing these options may completely change the route.
5
Press the MENU button. Press the dial to con fi rm the selection.
Turn the dial and select the "Navigation guidance" function.
6
Press the dial to con fi rm the selection.
7
Turn the dial and select the "De fi ne calculation criteria" function.
De fi ne calculation criteria
Press the dial to con fi rm the selection.
8
Turn the dial and select the "Guidance options" function.
Guidance options
Turn the dial and select, for example, the "Distance/time" function.
Distance/time
9.17
9.18
10
11
12
9
04 NAVIGATION - GUIDANCE
The volume of the Risk Areas POI alerts can only be adjusted during the alert.
SETTING RISK AREAS
ALERT PARAMETERS
1
Repeat steps 1 to 5 of the guidance option.
Press the dial to con fi rm the selection.
Turn the dial and select the "Traf fi c info" function if you wish to receive the traf fi c information announcements.
Traf fi c info
Tick this box for optimum operation of the traf fi c information, diversions will be suggested.
Press the dial to con fi rm the selection.
Select "OK" and press the dial to con fi rm.
OK
2
3
Turn the dial and select the "Set risk area parameters" function, then press the dial to con fi rm the warning message. Press the dial to con fi rm the selection.
Set risk area parameters
Select: warnings with an announcement duration (in seconds), during guidance only, then select OK and press the dial to con fi rm.
OK
These functions are only available if the risk areas have been downloaded and installed on the system.
4
3
1
2
04 NAVIGATION - GUIDANCE
ACTIONS ON THE MAP
Press the MENU button.
Turn the dial and select the "Map" function.
MAP ORIENTATION
4
For improved visibility, beyond the scale of 10 km, the map automatically switches to North Orientation.
Repeat steps 1 to 3 then turn the dial and select the "Map orientation" function.
Map orientation
5
Press the dial to con fi rm the selection.
Press the dial to con fi rm the selection.
Turn the dial and select the "Map details" function.
Permits selection of the services which can be seen on the map (hotels, restaurants, risk areas...).
Map details
6
7
Turn the dial and select the orientation of your choice.
Vehicle direction
North direction
3D view
Select "OK" and press the dial to con fi rm.
OK
9.19
9.20
3
4
2
1
04 NAVIGATION - GUIDANCE
DISPLAYING THE MAP IN A WINDOW
OR IN FULL SCREEN MODE
5
Press the MENU button.
Press the dial to con fi rm the selection.
Turn the dial and select the "Map" function.
6
Press the dial to con fi rm the selection.
Turn the dial and select the "Display map" function.
Display map
7
Turn the dial and select the "Map in window" or "Full screen map" tab.
Map in window
Full screen map
Select "OK" and press the dial to con fi rm
OK
5
4
3
2
1
05 TRAFFIC INFORMATION
CONFIGURING THE FILTERING OF
TMC ANNOUNCEMENTS
The TMC (Traf fi c Message Channel) messages provide information relating to the traf fi c and the weather conditions, received in real time and communicated to the driver in the form of audible announcements and icons on the navigation map.
The guidance system may then suggest a diversion route.
6
Press the MENU button.
Select the "Geographic fi lter" function and press the dial to con fi rm.
Geographic fi lter
Turn the dial and select the "Traf fi c information" function.
7 Turn the dial and select the fi lter of your choice.
Around the vehicle
On the route
Press the dial to con fi rm the selection.
8
Select "OK" and press the dial to con fi rm.
Turn the dial and select the "Filter traf fi c information" function.
Filter traf fi c information
OK
Press the dial to con fi rm the selection.
The fi lters are independent and one replaces the other.
We recommend:
- a fi c,
- a fi lter on the route for motorway journeys.
9.21
9.22
2
3
4
1
05 TRAFFIC INFORMATION
CONFIGURING THE DISPLAY OF
TMC MESSAGES
We recommend that you do not select the "New message display" tab for regions with heavy traf fi c.
5
Press the MENU button. Press the dial to con fi rm the selection.
6
Turn the dial and select the "Traf fi c information" function.
Press the dial to con fi rm the selection.
Turn the dial and select the "Con fi gure message announcement" function.
Con fi gure message announcement
7
8
Select the "Read messages" tab.
Read messages
The Traf fi c Information Messages will be read by the voice synthesiser.
Select the "New message display" tab.
The traf fi c information messages are extended to the fi lters selected
(geographic...) and can also be displayed when guidance is not active.
New message display
Select "OK" and press the dial to con fi rm.
OK
4
3
2
1
06 AUDIO/VIDEO
RADIO
SELECTING A STATION
Press the SOURCE button several times in succession and select RADIO.
Press the BAND button to select a waveband: FM1, FM2, FMast, AM.
Brie fl y press one of the buttons to carry out an automatic search of the radio stations.
Press one of the buttons to carry out a manual search of the radio stations.
Press the LIST button to display the list of stations received locally
(60 maximum).
To update this list, press for more than two seconds.
The external environment (hills, buildings, tunnels, basement car parks, ...) may block reception, including in RDS mode. This is a normal effect of the way in which radio waves are transmitted and does not indicate any failure of the audio equipment.
RDS
1
Press the MENU button.
2
Select "Audio functions" then press "OK".
3
4
Select the "FM waveband preferences" function then press "OK".
FM waveband preferences
Select "Activate RDS" then press "OK".
RDS appears on the screen.
Activate RDS
RDS, if displayed, enables you to continue listening to the same station by automatic retuning to alternative frequencies. However, in certain conditions, coverage of an RDS station may not be assured throughout the country as radio stations do not cover
100 % of the territory. This explains the loss of reception of the station during a journey.
9.23
9.24
06
MP3 CD
INFORMATION AND ADVICE
Empty CDs are not recognised and may damage the system.
The MP3 format, an abbreviation of MPEG 1.2 & 2.5 Audio
Layer 3, is an audio compression standard which permits the recording of several tens of music fi les on a single disc.
In order to be able to play a recorded CDR or CDRW, when recording, the ISO 9660 level 1.2 or Joliet fi le format is recommended.
If the disc is recorded in another format, it may not be played correctly.
It is recommended that the same recording format is always used for an individual disc, with as low a speed as possible
(4x maximum) for optimum sound quality.
In the particular case of a multi-session CD, the Joliet format is recommended.
The audio system will only play fi les with the extension ".mp3" with a sampling rate of 22.05 KHz or 44.1 KHz. No other type of fi le (.wma, .mp4, .m3u...) can be played.
It is advisable to restrict fi le names to 20 characters without using special characters (e.g. " ? ; ù) to avoid any playing or displaying problems.
CD
PLAYING A CD OR AN MP3 COMPILATION
Insert circular compact discs only. Some anti-pirating systems, on original discs or CDs copied using a personal recorder, may generate malfunctions regardless of the quality of the original player.
Insert an audio CD or an MP3 compilation in the player, play begins automatically.
1
If the player already contains a disc, press the SOURCE button several times in succession and select CD to listen to it.
2 Press one of the buttons to select a track on the CD.
Press the LIST button to display the list of tracks on the CD or of the folders of the MP3 compilation.
The play and display of an MP3 compilation may depend on the disc burning software and/or the settings used. We recommend use of the ISO 9660 fi le system format.
2
1
06 AUDIO/VIDEO
USING THE USB PORT *
The audio fi les are transmitted from a USB memory stick to your audio system, to be listened to via the vehicle's speakers.
Do not connect a hard drive or USB equipment other than USB memory sticks in FAT 16 or FAT 32 format
(NTFS not supported). This could damage your installation.
The list of compatible equipment is available from CITROËN dealers.
CONNECTING A USB MEMORY STICK
1
Connect the memory stick to the port, directly or using a lead. If the audio equipment is switched on, the USB source is detected as soon as it is connected. Play begins automatically after a delay which depends on the capacity of the USB memory stick.
The fi le formats recognised are .mp3 (mpeg1 layer 3 only).
USB memory stick (1.1, 1.2 and 2.0):
USB memory sticks must be in FAT or
FAT 32 format (NTFS not supported),
- navigation through the fi le base is by means of the steering mounted controls.
Do not connect a hard drive or USB equipment other than USB memory sticks in FAT 16 or FAT 32 format (NTFS not supported).
This could damage your installation.
* Availability according to vehicle.
9.25
06 AUDIO/VIDEO
9.26
1
PLAYING AN MP3 USB MEMORY STICK
Connect a USB memory stick to the port provided.
2 If another source is being played, press the SOURCE button several times in succession and select "USB" to play it.
3 Press one of the buttons to select a track on the USB memory stick.
Press the LIST button to display the list of folders on the MP3 USB memory stick.
To eject the USB memory stick, use the short-cut menu (press OK) or press the MENU button, select "Audio functions", "USB", then select "Eject USB".
The play and display of an MP3 compilation may depend on the fi le format used.
3
4
In order to be read, the USB memory stick must be formatted
FAT 16 or 32. The player only reads USB memory sticks.
1
JUKEBOX
COPYING AN MP3 USB MEMORY STICK ONTO
THE HARD DISK
Insert a USB memory stick in the space provided and press the MENU button.
2
Select "Audio functions" and press the dial to con fi rm.
5
Select "USB" and press the dial to con fi rm.
USB
Select "Copy USB to jukebox" and press the dial to con fi rm.
Copy USB to jukebox
Select "Complete disc" to copy the entire USB memory stick and press the dial to con fi rm.
Complete disc
1
2
3
4
5
06
COPYING A CD ONTO THE HARD DISK
Insert an audio CD or an MP3 compilation and press the MENU button.
Select "Audio functions" then select
CD and press the dial to con fi rm.
Audio functions
Select "Copy CD to jukebox" and press the dial to con fi rm.
Copy CD to jukebox
Select "Complete CD" to copy the entire CD and press the dial to con fi rm.
Complete CD
To stop the copy, repeat points 2 and 3. Select "Stop copy" and press the dial to con fi rm.
Stop copy
6
The "Auto creation" tab automatically copies the CD by default into an album of the type "album n°...".
Select the letters one by one and select "OK" to con fi rm.
OK
The audio or MP3 CD is copied onto the hard disk. Copying may take up to 20 minutes depending on the length the CD.
While copying is in progress, it is not possible to listen to albums previously copied to the hard disk or to CDs.
If it is not an MP3 CD, the Jukebox automatically compresses the
CD in MP3 format. The compression may take approximately
20 minutes depending on the length the CD. During this compression phase, it is possible to listen to the CD or to albums previously copied to the hard disk.
A long press on the SOURCE button starts copying of the CD.
It is not possible to copy fi les from the Jukebox to a CD.
The "Stop the CD copy" action does not delete the fi les which have already been transferred onto the jukebox hard disk.
9.27
3
2
1
06 AUDIO/VIDEO
LISTENING TO THE JUKEBOX
Press the SOURCE button several times in succession and select the
"Jukebox" function.
Jukebox
Press the LIST button.
Turn the dial to select the fi les.
9.28
Press the ESC button to return to the fi rst fi le level.
1
RENAMING AN ALBUM
Press the MENU button.
2 Select "Audio functions" and press the dial to con fi rm.
3
4
Select the "Jukebox" function and press the dial to con fi rm.
Jukebox
Select the "Jukebox management" function and press the dial to con fi rm.
Jukebox management
06 AUDIO/VIDEO
5
6
7
Select the album to be renamed and press the dial to con fi rm.
Select the "Rename" tab and press the dial to con fi rm.
Rename
Turn the dial and select the letters of the album title one by one con fi rming each time by pressing the dial.
8
Select "OK" and press the dial to con fi rm.
OK
To rename the tracks of an album, follow the same procedure, selecting the tracks to be renamed.
Use the ESC button to exit from the list of tracks.
Use the alphanumeric keypad to enter the letters of the album title one by one.
Select the "Delete" function to delete an album or a track from the Jukebox.
Delete
9.29
06 AUDIO/VIDEO
USING THE AUXILIARY INPUT (AUX)
AUDIO (JACK/RCA) CABLE NOT SUPPLIED
Press the MENU button then select the "Con fi guration" function, then "Sounds", then "Activate auxiliary source" to activate the
NaviDrive audio/telephone auxiliary input.
1
Connect the portable device
(MP3 player…) to the audio sockets (white and red,
RCA type) located in the glovebox using a suitable audio cable (JACK or RCA).
2
Press the SOURCE button several times in succession and select AUX.
9.30
Display and control is on the portable device.
It is not possible to copy the fi les onto the hard disk via the auxiliary input.
4
5
3
2
06 AUDIO/VIDEO
VIDEO MENU
After connecting the video equipment, press the MENU button.
Turn the dial and select the "Video" function.
Press the dial to con fi rm the selection.
Turn the dial and select the "Activate video mode" function to activate/ deactivate the video.
Activate video mode
Press the dial to con fi rm the selection.
You can connect video equipment (camcorder, digital camera, DVD player...) to the three audio/video sockets, located in the glove box.
6 Turn the dial and select the "Video parameters" function to set the display format, the brightness, the contrast and the colours.
Video parameters
7
Press the dial to con fi rm the selection.
Pressing the DARK button disconnects display of the video.
Pressing the SOURCE button several times in succession permits the selection of an audio source other than that of the video.
Videos can only be displayed when stationary.
9.31
2
1
07 INTERNAL TELEPHONE
INSTALLING YOUR SIM CARD
(NOT SUPPLIED)
ENTERING THE PIN CODE
1
Enter the PIN code on the keypad.
Open the holder by pressing the button using the tip of a pen.
PIN code
2
Install the SIM card in the holder and then insert it in the slot.
Con fi rm the PIN code by pressing the # button.
3
To remove the SIM card, repeat step 1.
When entering your PIN code, tick the "Store PIN" tab to gain access to the telephone without having to enter this code when it is used subsequently.
9.32
Your SIM card must be installed and removed with the NaviDrive audio and telematics system switched off and the ignition off.
07 BLUETOOTH TELEPHONE
CONNECTING A BLUETOOTH
TELEPHONE
The services offered by the telephone depend on the network, the SIM card and the compatibility of the Bluetooth equipment used. Refer to your telephone's manual and your operator to check which services you have access to. A list of mobile telephones which offer the best range of services is available from dealers.
3
For reasons of safety, the driver should only carry out operations which require prolonged attention when the vehicle is stationary
(pairing the Bluetooth mobile telephone to the hands-free kit).
Select "Bluetooth activation mode", then "Activated and visible". Press the dial to con fi rm each operation.
1
Activate the telephone's Bluetooth function.
The last telephone connected is reconnected automatically.
2
Press the MENU button, select
"Telematics", then "Bluetooth functions". Press the dial to con fi rm each operation.
To fi nd and change the name of the CITROËN audio/telephone, repeat step 2 then select "Change the name of the audio/ telephone".
4 y p , the CITROËN audio/telephone. Enter the authentication code (0000 by default).
9.33
07 BLUETOOTH TELEPHONE
CONNECTING A BLUETOOTH
TELEPHONE
To change the authentication code, repeat step 2 then select
"Authentication code" and save the code of your choice.
Once the telephone has been connected, the system can synchronise the address book and the call list. Repeat step 2 then select "Phone book synchronisation mode". Select the synchronisation of your choice and press the dial to con fi rm.
The synchronisation may take a few minutes.
9.34
To change the telephone connected, repeat step 2 then select
"List of matched peripheral equipment" and press OK to con fi rm.
The list of previously connected telephones (10 maximum) appears. Select the telephone of your choice, con fi rm, then select "Connect" and press the dial to con fi rm.
The call list consists of calls made from the vehicle's telephone only.
4
3
2
1
07 USING THE TELEPHONE
CALLING A CONTACT
To select the telephone used, press MENU, then select "Telematics", then "Bluetooth functions", then "Bluetooth activation mode". Then select:
- "Deactivated": to use the internal telephone,
- "Activated and visible": to use the Bluetooth telephone, visible to all telephones,
- "Activated and not visible": to use the Bluetooth telephone, not visible to other telephones, it is not possible to match a new telephone.
5
Press the PICK UP button to display the telephone short-cut menu.
Press the PICK UP button to call the number dialled.
6
Press the HANG UP button to end the call.
Select "Call list" or "Phone book" and press "OK". Select the number required and con fi rm to make the call.
ACCEPTING OR REJECTING A CALL
Turn the dial and select the "Dial" function.
Dial Press the PICK UP button to accept a call.
Press the dial to con fi rm the selection.
Press the HANG UP button to reject a call.
Dial the telephone number of your contact using the alphanumeric keypad.
Press the end of the steering wheel stalk for more than 2 seconds to access the telephone menu: calls log, directory, voice mailbox.
9.35
9.36
08
On-board computer
Route
Distance 460 miles
6.5
l/100
19 mph
- The "vehicle" tab: the range, the current fuel consumption and the distance remaining to the destination.
"1" the average fuel consumption and the distance travelled calculated over route "1".
"2" for a second route.
A FEW DEFINITIONS
Range: displays the distance which can travelled with the remaining fuel detected in the tank, basd on the average consumption over the last few miles (kilometres).
This displayed value may vary signi fi cantly following a change in the vehicle speed or the relief of the route.
When the range falls below 20 miles (30 km), dashes are displayed.
After fi lling with at least 10 litres of fuel, the range is recalculated and is displayed when it exceeds 60 miles (100 km).
, g, contact a CITROËN dealer.
Current fuel consumption: only calculated and displayed above 20 mph (30 km/h).
Average fuel consumption: this is the average fuel consumption since the last trip computer zero reset.
Distance travelled: calculated since the last trip computer zero reset.
Distance remaining to the destination: calculated with reference to the fi nal destination, entered by the user. If guidance is activated, the navigation system calculates it as a current value.
Average speed: this is the average speed calculated since the last trip computer zero reset (ignition on).
08 TRIP COMPUTER
CONTROL SHORT-CUTS
Each press of the button displays the different trip information in succession, depending on the screen.
VEHICLE DIAGNOSTICS
1
VEHICLE DIAGNOSTICS
2
ALERT LOG
2
STATUS OF FUNCTIONS
2
RESET TYRE PRESS. DETECT. SYS.
On-board computer
Instantaneous info.
Range 534 miles l/100 miles
Zero reset
When the required route is displayed, press the control for more than two seconds.
9.37
9.38
4
3
2
1
09 CONFIGURATION
SETTING THE DATE AND TIME
This adjustment must be carried out whenever the battery has been disconnected.
Press the MENU button.
The "Con fi guration" function gives access to the colour, brightness and units settings and to voice commands.
5
Press the dial to con fi rm the selection.
6
Turn the dial and select the
"Con fi guration" function.
Turn the dial and select the "Set date and time" function.
Set date and time
7
Press the dial to con fi rm the selection.
Press the dial to con fi rm the selection.
Turn the dial and select the "Display con fi guration" function.
Display con fi guration
8
Adjust the settings one by one con fi rming by pressing the dial. Next select the "OK" tab on the screen then con fi rm.
OK
10 SCREEN MENU MAP
5 around current place
1
NAVIGATION - GUIDANCE
2
SELECT DESTINATION
3 enter an address
4
country:
4
town:
4
road:
4
N°/_:
4
curr. loc
4
store
4
POI
5 near
5 on the route
1
MAIN FUNCTION
2
OPTION A
3 option A1
3 option A2
2
OPTION B...
5 search by name
3
GPS coordinates
3 directory
3 previous destinations
2
JOURNEY LEGS AND ROUTE
3 add a stage
4
enter an address
4
directory
4
previous destinations
3 order/delete journey legs
3 divert route
3 chosen destination
2
GUIDANCE OPTIONS
3 de fi ne calculation criteria
4
fastest
4
shortest
4
distance/time
4
with tolls
4
with ferry
4
traf fi c info
3 set speech synthesis
3 activate/deactivate road names
3 delete last destinations
2
STOP/RESUME GUIDANCE
9.39
10 SCREEN MENU MAP
1
MAP
2
MAP ORIENTATION
3 vehicle direction
3 north direction
3
3D view
2
MAP DETAILS
3 administration and safety
4 town halls, town centre
4 universities, colleges
4 hospitals
3 hotels, restaurants and shops
4 hotels
4 restaurants
4 vineyards
4 business centres
9.40
4
supermarkets, shopping
3 culture, tourism and shows
4 culture and museums
4 casinos and nightlife
4 cinemas and theatres
4 tourism
4 shows and exhibitions
3 sports and open air centres
4 sports centres
4 golf courses
4 skating rinks, bowling alleys
4 winter sports resorts
4 parks, gardens
4 theme parks
3 transport and automobile
4
airports, ports
4
stations, bus stations
4
vehicle rental
4
lay bys, car parks
4
service stations, garages
2
DISPLAY MAP
3 full screen map
3 map in window
2
MOVE THE MAP/FOLLOW VEHICLE
2
MAP DATABASE DESCRIPTION
1
TRAFFIC INFORMATION
2
READ MESSAGES
2
FILTER TRAFFIC INFORMATION
3 geographic fi lter
3 store all messages
3 store messages
10 SCREEN MENU MAP
4 around the vehicle
4 on the route
3 road information
4 traf fi c information
4 road closure
4 size limit
4 road condition
4 weather and visibility
3 urban/city information
4 parking
4 public transport
4 demonstrations
2
CONFIGURE MESSAGE ANNOUNCEMENT
3 read messages
3 new message display
2
SELECT TMC STATION
3 automatic TMC
3 manual TMC
3 list of TMC stations
1
AUDIO FUNCTIONS
2
RADIO FAVOURITES
3 enter a frequency
3 activate/deactivate RDS mode
3 activate/deactivate regional mode
3 display/hide radio text
2
CD, USB, JUKEBOX FAVOURITES
3 activate/deactivate Introscan (SCN)
3 activate/deactivate Random mode (RDM)
3 activate/deactivate Repeat (RPT)
3 activate/deactivate display of CD info
2
CD
3 copy CD to Jukebox
4 copy complete CD
4 multiple selection
4 current album
4 current track
3 eject CD
2
USB
3 copy USB to Jukebox
4 complete disc
4 multiple selection
4 current album
4 current track
3 eject USB
2
JUKEBOX
3 jukebox management
9.41
9.42
10 SCREEN MENU MAP
3 jukebox con fi guration
4 hifi (320 kbps)
4 high (192 kbps)
4 normal (128 kbps)
3 playlist management
3 delete jukebox data
3
Jukebox status
1
TELEMATICS
2
CALL
3 call list
3 dial
3 directory
3 mailbox
3 services
4 customer contact centre
4
CITROËN assistance
4
CITROËN service
4 messages received
2
DIRECTORY
3 managing directory fi les
4
consult or modify a fi le
4
add a fi le
4
delete a fi le
4
delete all fi les
3 con fi gure directory
4
select a directory
4
name directory
4
select starting directory
3 fi le transfer
4
exchange by infrared
5
send all records
5
send one record
5 receive by infrared
4
exchange with SIM card
5 send all records to SIM
5 send one record to SIM
5 receive all SIM fi les
5 receive a SIM fi le
4
exchange with Bluetooth
2
TEXT MESSAGES (SMS)
3 read received text messages
3 send a text message
3 write a text message
3 delete list of text messages
2
TELEPHONE FUNCTIONS
3 network
4
network search mode
10 SCREEN MENU MAP
5 automatic mode
5 manual mode
4
networks available
3 length of calls
4 reset
3 manage PIN code
4 activate/deactivate
4 save PIN code
4 modify PIN code
3 call options
4 con fi gure calls
5
display my number
5
automatic reply after x ring(s)
4 ring options
5
for voice calls
5
for text messages (SMS)
* The parameters vary according to vehicle.
6
text message ring
3 calls diversion to mailbox n°
3 delete calls log
2
BLUETOOTH FUNCTIONS
3 activation mode
4 deactivated
4 activated and visible
4 activated and not visible
3 list of matched peripheral equipment
3 change the name of the audio/telephone
3 authentication code
3 phone book synchronisation mode
4 no synchronisation
4 view telephone phone book
4 view SIM card phone book
4 view all phone books
1
CONFIGURATION
2
DISPLAY CONFIGURATION
3 choose colour
3 adjust luminosity
3 set date and time
3 select units
2
SOUND
3 voice commands setting
3 speech synthesis setting
4
guidance instructions volume
4
other message volume
4
select female/male voice
3 activate/deactivate auxiliary source
2
SELECT LANGUAGE
2
DEFINE VEHICLE PARAMETERS *
9.43
10 SCREEN MENU MAP
1
VIDEO
2
ACTIVATE VIDEO MODE
2
VIDEO PARAMETERS
3 display formats
3 adjust luminosity
3 set colours
3 set contrasts
Press the MENU button for more than 2 seconds to access the following fl ow chart.
1
VOICE COMMANDS LIST
1
AUDIO/TELEPHONE DIAGNOSTICS
2
GPS COVERAGE
2
UNIT BACKUP POWER
2
UNIT DESCRIPTION
1
NAVIGATION DEMONSTRATION
1
VEHICLE DIAGNOSTICS
2
ALERT LOG
2
STATUS OF FUNCTIONS *
2
RESET TYRE PRESS. DETEC. SYS. *
1
SERVICES CONFIGURATION
* The parameters vary according to the vehicle.
9.44
Display short cuts version 8.2
Press the Music button several times in succession to access the following settings.
MUSICAL AMBIENCE
BASS
TREBLE
LOUDNESS CORRECTION
FR - RR BALANCE
LH - RH BALANCE
AUTO VOLUME CORRECTION
Each audio source (Radio, CD, MP3,
Jukebox) has its own separate settings.
FREQUENTLY ASKED QUESTIONS
The table below groups together the answers to the most frequently asked questions.
QUESTION
There is a difference in sound quality between the different audio sources (radio, CD...).
ANSWER
For optimum sound quality, the audio settings (Volume, Bass, Treble,
Ambience, Loudness) can be adapted to the different sound sources, which may result in audible differences when changing source
(radio, CD...).
The CD is ejected automatically or is not played by the player.
The CD player sound is poor.
The CD is inserted upside down, is unplayable, does not contain any audio data or contains an audio format which the player cannot play.
The CD used is scratched or of poor quality.
The audio equipment settings (bass, treble, ambiences) are unsuitable.
SOLUTION
Check that the audio settings (Volume, Bass,
Treble, Ambience, Loudness) are adapted to the sources listened to. It is advisable to set the AUDIO functions (Bass, Treble, Front-Rear
Balance, Left-Right Balance) to the middle position, select the musical ambience "None" and set the loudness correction to the "Active" position in CD mode or to the "Inactive" position in radio mode.
The CD is protected by an anti-pirating protection system which is not recognised by the audio equipment.
- Check that the CD is inserted in the player the right way up.
- Check the condition of the CD: the CD cannot be played if it is too damaged.
- Check the content in the case of a recorded
CD: consult the advice in the Audio section.
- The audio equipment's CD player does not play DVDs.
- Due to inadequate quality, certain recorded
CDs will not be played by the audio system.
Insert good quality CDs and store them in suitable conditions.
Set the treble or bass level to 0, without selecting an ambience.
9.45
QUESTION
The stored stations do not function (no sound,
87.5 Mhz is displayed...).
ANSWER
An incorrect waveband is selected.
SOLUTION
Press the BAND AST button to return to the waveband (AM, FM1, FM2, FMAST) on which the stations are stored.
The quality of reception of the radio station listened to gradually deteriorates or the stored stations do not function
(no sound, 87.5 Mhz is displayed...).
The vehicle is too far from the transmitter used by the station listened to or there is no transmitter in the geographical area through which the vehicle is travelling.
The environment (hills, buildings, tunnels, basement car parks...) block reception, including in RDS mode.
The aerial is absent or has been damaged (for example when going through a car wash or into an underground car park).
Sound cut-outs of 1 to
2 seconds in radio mode.
During this brief sound cut-out, the RDS searches for any frequency permitting better reception of the station.
Activate the RDS function to enable the system to check whether there is a more powerful transmitter in the geographical area.
This phenomenon is normal and does not indicate a failure of the audio equipment.
Have the aerial checked by a CITROËN dealer.
Deactivate the RDS function if the phenomenon is too frequent and always on the same route.
With the engine off, the audio equipment switches off after a few minutes of use.
TRAFFIC INFO is selected. However, certain traf fi c jams along the route are not indicated in real time.
When the engine is switched off, the audio equipment operating time depends on the battery charge.
The switch-off is normal: the audio equipment switches to economy mode and switches off to prevent discharging of the vehicle's battery.
Start the vehicle's engine to increase the battery charge.
On starting, it is several minutes before the system begins to receive the traf fi c information.
In certain countries, only major routes (motorways, ...) are listed for the traf fi c information.
Wait until the traf fi c information is being received correctly (displaying of the traf symbols on the map).
fi c information
This phenomenon is normal. The system is dependent on the traf fi c information available.
The time taken to calculate a route sometimes seems longer than usual.
The performance of the system may slow down temporarily if a CD is being copied onto the Jukebox at the same time as a route is being calculated.
9.46
Wait until the CD has been copied or stop the copying before starting the guidance function.
Does the emergency call function work without a
SIM card?
ANSWER
Certain national regulations impose the presence of a SIM card in order to make an emergency call.
The altitude is not displayed.
On starting, the initialisation of the GPS may take up to 3 minutes to receive more than 4 satellites correctly.
My SIM card is not recognised.
The route is not calculated successfully.
SOLUTION
Insert a valid SIM card in the slot on the system.
Wait until the system has started up completely.
Check that there is a GPS coverage of at least
4 satellites (long press on the MENU button, then select AUDIO/TELEPHONE DIAGNOSTICS, then
GPS COVERAGE).
Depending on the geographical environment (tunnel, ...) or the weather, the conditions of reception of the GPS signal may vary.
This phenomenon is normal. The system is dependent on the conditions of reception of the
GPS signal.
Contact your telephone operator.
The system accepts 3.3 V SIM cards, the old 5 V and 1.8 V SIM cards are not recognised.
The exclusion criteria may con fl ict with the current location (exclusion of toll roads on a motorway with tolls).
Check the exclusion criteria.
There is a long wait after inserting a CD.
When a new medium is inserted, the system reads a certain amount of data (folder, title, artist, etc.). This may take a few seconds.
This phenomenon is normal.
I cannot connect my
Bluetooth telephone.
The telephone's Bluetooth function may be switched off or the equipment may not be visible.
- Check that your telephone's Bluetooth function is switched on.
9.47
The MyWay is protected in such a way that it will only p the system.
y vehicle, contact a CITROËN dealer for con fi guration of
For safety reasons, the driver must carry out operations which require prolonged attention while the vehicle is stationary.
When the engine is switched off and to prevent discharging of the battery, the MyWay switches off following the activation of the Energy Economy mode.
Certain functions described in this handbook will become available during the year.
MyWay
MULTIMEDIA AUDIO SYSTEM/BLUETOOTH TELEPHONE
SATELLITE NAVIGATION SYSTEM FOR EUROPE BY SD CARD
CONTENTS
01 First steps
02 Steering mounted controls
03 General operation
04 Navigation - Guidance
05 Traffic information
06 Radio
07 Music media players
08 Bluetooth telephone
09 Configuration
10 Trip computer
11 Screen menu map
Frequently asked questions
9.66
9.69
9.72
9.73
9.74
9.78
9.50
9.51
9.52
9.55
9.63
9.65
p. p. p. p. p. p. p. p. p. p. p. p.
9.49
01 FIRST STEPS
MyWay CONTROL PANEL
11
33 44 55 66
22
144
1. Engine not running
- Short press: on/off.
- Long press: CD pause, mute for the radio.
Engine running
- Short press: CD pause, mute for the radio.
- Long press: reinitialisation of the system.
2.
Volume adjustment (each source is p g messages and alerts).
3. Access to the "Radio" Menu. Display the list of stations.
4. Access to the "Music" Menu. Display the tracks.
3 - 4. Long press: access to the audio settings: front/rear fader and left/right balance, bass/ qq adjustment, initialise the settings.
9.50
77 88 99
155
5. Access to the "SETUP" menu.
Long press: access to the GPS coverage and the demonstration mode.
6. Access to the "Phone" Menu. Display the call list.
7. Access to the "MODE" menu.
Selection of the successive display of: p computer.
( p g )
Telephone (if a conversation is in progress), Trip
Long press: display of a black screen (DARK).
8. Access to the "Navigation" Menu. Display the last destinations.
9. Access to the "Traf fi c" Menu. Display the current traf fi c alerts.
10. ESC: abandon the operation in progress.
11. CD eject.
12. Selection of the previous/next radio station from the list.
Selection of the previous/next MP3 folder.
Selection of the previous/next page of a list.
13. Selection of the previous/next radio station.
Selection of the previous/next CD or MP3 track.
Selection of the previous/next line of a list.
14. Buttons 1 to 6:
Selection of the stored radio station.
Long press: store the current radio station.
15. SD card reader (navigation SD card only). p y according to the context of the menu.
Short press: contextual menu or con fi rmation.
Long press: contextual menu speci fi c to the list displayed.
02 STEERING MOUNTED CONTROLS
RADIO: selection of the next stored station.
Selection of the next entry in the address book.
RADIO: selection of the previous stored station.
Selection of the previous entry in the address book.
RADIO: change to the next radio station on the list.
Long press: automatic search for a higher frequency.
CD: selection of the next track.
CD: continuous press: fast forward play.
Volume increase.
- Change the sound source.
- Make a call from the address book.
- Press for more than 2 seconds: access to the address book.
Mute: function activated by pressing the volume increase and decrease buttons simultaneously.
Restore the sound by pressing one of the two volume buttons.
Volume decrease.
RADIO: change to the previous radio station on the List.
Long press: automatic search for a lower frequency.
CD: selection of the previous track.
CD: continuous press: fast reverse.
9.51
03 GENERAL OPERATION
9.52
Press the MODE button several times in succession for access to the following menus:
RADIO / MUSIC MEDIA
PLAYERS
FULL SCREEN MAP
TELEPHONE
(If a conversation is in progress)
NAVIGATION
(If guidance is in progress)
TRIP COMPUTER
SETUP: system language * , date and time * , display, vehicle settings * , unit and system settings,
"Demo mode".
* Available according to model.
TRAFFIC:
TMC information and messages.
For cleaning the screen, the use of a soft, non-abrasive cloth
(spectacles cloth) is recommended, with no additional product.
For a detailed global view of the menus available, refer to the
"Screen menu map" section.
03 GENERAL OPERATION
DISPLAY ACCORDING TO THE CONTEXT
A press on the OK dial gives access to short-cut menus according to the display on the screen.
2
Zoom/Scroll
1
Voice advice
1
Route options
NAVIGATION (IF GUIDANCE IS IN PROGRESS):
1
Abort guidance
1
Repeat advice
1
Block road
1
Route info
2
Show destination
2
Trip info
3
Route type
3
Avoid
3
Satellites
TRIP COMPUTER:
1
Alert log
1
Status of functions
TELEPHONE:
1
End call
1
Hold call
1
Dial
1
DTMF-Tones
1
Private mode
1
Micro off
9.53
9.54
03 GENERAL OPERATION
DISPLAY ACCORDING TO THE CONTEXT
MUSIC MEDIA PLAYERS:
1
Traf fi c info (TA)
1
Play options
2
Normal order
2
Random track
2
Repeat folder
2
Scan
1
Select music
RADIO:
1
In FM mode
2
Traf fi c info (TA)
2
RDS
2
Radiotext
2
Regional prog.
2
AM
1
In AM mode
2
TA
2
Refresh AM list
2
FM
FULL SCREEN MAP:
1
Abort guidance / Resume guidance
1
Set destination
1
POIs nearby
1
1
Position info
1
Map settings
Zoom/Scroll
3
2
1
04 NAVIGATION - GUIDANCE
SELECTING A DESTINATION
Insert the SD card in the front panel reader and leave it there to use the
Navigation functions.
The navigation SD card data must not be modi fi ed.
Map data updates are available from CITROËN dealers.
4
Select the "Address input" function and press the dial to con fi rm.
Press the NAV button.
Address input
5
The list of the last 20 destinations appears under the Navigation
Menu function.
Once the country has been selected, turn the dial and select the town function. Press the dial to con fi rm.
6
Press the NAV button again or select the Navigation Menu function and press the dial to con fi rm.
Navigation Menu
Select the "Destination input" function and press the dial to con fi rm.
Destination input
Select the letters of the town one by one con fi rming each time by pressing the dial.
A pre-set list (by entering the fi rst few letters) of the towns in the country selected can be accessed via the LIST button on the virtual keypad.
9.55
7
04 NAVIGATION - GUIDANCE
9
Turn the dial and select OK.
Press the dial to con fi rm.
Then select "Start route guidance" and the press the dial to con fi rm.
To speed up the process, the post code can be entered directly after selecting the "Postal code" function.
Use the virtual keypad to enter the letters and digits.
Start route guidance
8
Repeat steps 5 to 7 for the "Street" and "House number" functions.
Select the route type:
"Fast route", "Short route" or "Optimized route" and press the dial to con fi rm.
It is also possible to select a destination via "Choose from address book" or "Choose from last destinations".
Choose from address book Choose from last destinations
Select the "Save to address book" function to record the address entered in a directory fi le. Press the dial to con fi rm the selection.
MyWay allows up to 500 contact fi les to be recorded.
During guidance, pressing the end of the lighting stalk repeats the last guidance instruction.
Map settings
You can zoom in/zoom out on the map using the dial.
It is possible to move the map or select its orientation via the shortcut menu of the FULL SCREEN MAP.
Press MODE until the map is displayed full screen. Press the dial then select "Map settings". Select "2.5D Map" or "2D Map" and in the latter case, select "North Up" or "Heading Up".
9.56
To clear a destination; from steps 1 to 3, select "Choose from last destinations".
A long press on one of the destinations displays a list of actions from which you can select:
Delete entry
Delete list
1
2
3
04 NAVIGATION - GUIDANCE
SETTING AND NAVIGATING TO
MY "HOME ADDRESS"
4
To be set as the "Home address", an address must fi rst be entered in the address book, for example from "Destination input"/"Address input" then "Save to address book".
Press the NAV button twice to display the Navigation Menu.
Navigation Menu
Select "Destination input" and con fi rm.
Then select "Choose from address book" and con fi rm.
Destination input
Select "Address book" and con fi rm.
Then select "Search entry (complete address book)" and con fi rm.
Address book
5
Select your home address and con fi rm.
Then select "Edit entry" and con fi rm.
Edit entry
Select "Set as home address" and con fi rm to save.
Set as "Home address"
To start navigation towards "Home address", press NAV twice to display the Navigation Menu, select "Destination input" and con fi rm.
Then select "Navigate HOME" and con fi rm to start guidance.
9.57
9.58
4
3
1
2
04 NAVIGATION - GUIDANCE
ROUTE OPTIONS
Press the NAV button.
The route selected by the MyWay system depends directly on the route options.
Changing these options may change the route completely.
5
Select the "Route dynamics" function.
This function gives access to the
"Traf fi c independent" or
"Semi-dynamic" options.
Route dynamics
Press the NAV button again or select the Navigation Menu function and press the dial to con fi rm.
Navigation Menu
6
Select the "Avoidance criteria" function. This function provides access to the AVOID options
(motorways, toll roads, ferries).
Select the "Route options" function and press the dial to con fi rm.
Route options
7
Avoidance criteria
Select the "Route type" function and press the dial to con fi rm. This function allows you to change the route type.
Route type
Turn the dial and select the
"Recalculate" function to take into account the route options selected.
Press the dial to con fi rm.
Recalculate
4
3
2
1
04 NAVIGATION - GUIDANCE
ADDING A STOPOVER
Stopovers can be added to the route once the destination has been selected.
5
Press the NAV button.
Enter a new address, for example.
Address input
6
Press the NAV button again or select the Navigation Menu function and press the dial to con fi rm.
Navigation Menu
Select the "Stopovers" function and press the dial to con fi rm.
Stopovers
7
Once the new address has been entered, select OK and press the dial to con fi rm.
OK
Select "Recalculate" and press the dial to con fi rm.
Recalculate
Select the "Add stopover" function
(5 stopovers maximum) and press the dial to con fi rm.
Add stopover
The stopover must be completed or deleted in order for the guidance to continue to the next destination. Otherwise, the MyWay will always return you to the previous stopover.
9.59
9.60
1
2
3
4
5
04 NAVIGATION - GUIDANCE
SEARCHING FOR POINTS OF INTEREST
(POI)
The points of interest (POI) indicate all of the service locations in the vicinity (hotels, various businesses, airports...).
Press the NAV button.
6 Select the "POI in city" function to search for POIs in the city required.
Select the country then enter the name of the city using the virtual keypad.
POI in city
Press the NAV button again or select the Navigation Menu function and press the dial to con fi rm.
Navigation Menu
Select the "POI search" function and press the dial to con fi rm.
POI search
Select the "POI nearby" function to search for POIs around the vehicle.
POI nearby
Select the "POI near destination" function to search for POIs near the point of arrival of the route.
POI near destination
7
8
A list of cities present in the country selected can be accessed via the LIST button on the virtual keypad.
Select the "POI in country" function to search for POIs in the country required.
POI in country
Select the "POI near route" function to search for POIs near the route.
POI near route
04 NAVIGATION - GUIDANCE
LIST OF PRINCIPAL POINTS OF INTEREST (POI)
This icon appears when several POIs are grouped together in the same area. Zooming in on this icon shows details of the POIs.
* According to availability in the country. 9.61
9.62
1
2
3
4
04 NAVIGATION - GUIDANCE
NAVIGATION SETTINGS
To activate or deactivate vocal guidance, with guidance active and the map displayed in the screen, press the dial and then select or deselect "Voice advice".
Voice advice
The adjustment of the volume for the Risk Areas POIs is used only during the transmission of an alert.
Press the NAV button.
5
Select the "POI categories on Map" function to select the POIs to be displayed on the map by default.
Press the NAV button again or select the Navigation Menu function and press the dial to con fi rm.
POI categories on Map
6
Navigation Menu Select "Set parameters for risk areas" for access to the "Display on map", "Visual alert" and "Sound alert" functions.
Select the "Settings" function and press the dial to con fi rm.
Set parameters for risk areas
Settings
Select the "Navi volume" function and turn the dial to set the volume of each voice synthesiser (traf fi c information, alert messages…).
Navi volume
UPDATING THE RISK AREAS POIs
(Speed camera information)
Contact a CITROËN dealer for the procedure to follow to obtain the
RISK AREA POIs.
This requires an SDHC (High Capacity) compatible reader.
2
3
1
05 TRAFFIC INFORMATION
CONFIGURE THE FILTERING AND
DISPLAY OF TMC MESSAGES
TMC (Traf fi c Message Channel) messages contain information on traf fi c and weather conditions, received in real time and transmitted to the driver in the form of audible announcements and symbols on the navigation map.
The navigation system can then suggest an alternative route to avoid a traf fi c problem.
4
Press the TRAFFIC button.
Select the "Geo. Filter" function and press the dial to con fi rm.
Geo. Filter
5
The list of TMC messages appears under the Traf fi c Menu sorted in order of proximity.
Press the TRAFFIC button again or select the Traf fi c Menu function and press the dial to con fi rm.
Traf fi c Menu
Select the fi lter of your choice:
Messages on route
All warning messages
Only warnings on route
All messages
The messages appear on the map and on the list.
To exit, press ESC.
Then select the radius of the fi lter in miles (km) required in accordance with the route, press the dial to con fi rm.
When all of the messages on the route are selected, the addition of a geographical fi lter is recommended
(within a radius of 3 miles (5 km) for example) to reduce the number of messages displayed on the map.
The geographical fi lter follows the movement of the vehicle.
The fi lters are independent and their results are cumulative.
We recommend a fi lter on the route and a fi lter around the vehicle of: miles fi c, miles fi c,
9.63
9.64
05 TRAFFIC INFORMATION
PRINCIPAL TMC SYMBOLS RECEIVING TA MESSAGES
1 Black and blue triangle: general information, for example:
- the station transmits TA messages.
- the station does not transmit TA messages.
- TA messages are not activated.
The TA (Traf fi c Announcement) function gives priority to TA alert messages. To operate, this function needs good reception of a radio station transmitting this type of message. When a traf fi c report is transmitted, the current audio source (Radio, CD, ...) is interrupted automatically to play the TA message. Normal playback of the audio source resumes at the end of the transmission of the message.
2 Red and yellow triangle: traf fi c information, for example:
1
With the current audio source displayed on the screen, press the dial.
2
The shortcut menu for the source appears and gives access to:
TA
3
Select Traf fi c Announcements (TA) and press the dial to con fi rm and go to the associated settings.
1
06 RADIO
SELECTING A STATION
Press the RADIO button to display the list of stations received locally sorted in alphabetical order.
Select the station required by turning the dial and press to con fi rm.
While listening to the radio, press one of the buttons to select the previous or next station on the list.
A long press of one of the buttons starts the automatic search for a station with a lower or higher frequency.
Press one of the buttons on the numeric keypad for more than
2 seconds to store the current station.
Press the button on the numeric keypad to recall the stored radio station.
The external environment (hill, building, tunnel, underground car park...) may interfere with the reception, including in RDS following mode.
This phenomenon is a normal result of the way in which radio waves are transmitted and does not in any way indicate a failure of the audio equipment.
RDS - REGIONAL MODE
1
When the current radio station is displayed on the screen, press the dial.
2
The radio source short-cuts menu appears and provides access to the following short-cuts:
TA
RDS
Radiotext
Regional prog.
AM
3
Select the function required and press the dial to con fi rm to gain access to the corresponding settings.
RDS, if displayed, allows you to continue listening to the same station by automatic retuning to alternative frequencies. However, in certain conditions, coverage of an RDS station may not be assured throughout the entire country as radio stations do not cover 100 % of the territory. This explains the loss of reception of the station during a journey.
9.65
07 MUSIC MEDIA PLAYERS
CD, MP3/WMA CD
INFORMATION AND ADVICE
The MP3 format, an abbreviation of MPEG 1, 2 & 2.5 Audio Layer 3 and the WMA format, an abbreviation of Windows Media Audio and the property of Microsoft, are audio compression standards which permit the recording of several tens of music fi les on a single disc.
The MyWay will only play audio fi les with the extension ".mp3" with a speed of between 8 Kbps and 320 Kbps and the extension
".wma" with a speed of between 5 Kbps and 384 Kbps.
It also supports the VBR (Variable Bit Rate) mode.
No other type of fi le (.mp4, .m3u...) can be played.
9.66
In order to be able to play a recorded CDR or CDRW, when recording it is preferable to select the ISO 9660 level 1, 2 or Joliet standard.
If the disc is recorded in another format it may not be played correctly.
It is recommended that the same recording standard is always used for an individual disc, with as low a speed as possible
(4x maximum) for optimum sound quality.
In the particular case of a multi-session CD, the Joliet standard is recommended.
It is advisable to restrict fi le names to 20 characters, without using special characters (e.g.: " ? ; ù) to avoid any play or display problems.
2
3
1
07 MUSIC MEDIA PLAYERS
SELECTING/PLAYING MUSIC
CD, MP3/WMA CD
4
Press the MUSIC button.
The list of tracks or MP3/WMA fi les appears under Music Menu.
Press the MUSIC button again or select the Music Menu function and press the dial to con fi rm.
Music Menu
Select the "Select music" function and press the dial to con fi rm.
Select music
Select the music source required:
CD, MP3/WMA CD. Press the dial to con fi rm. Play begins.
5
Press the up or down button to select the next/previous folder.
6
Press one of the buttons to select a music track.
Press and hold one of the buttons for fast forward or rewind play.
The playing and displaying of an MP3/WMA compilation may depend on the recording programme and/or the settings used.
We recommend the ISO 9660 fi le standard.
9.67
07 MUSIC MEDIA PLAYERS
USING THE EXTERNAL INPUT (AUX)
AUDIO JACK-RCA CABLE NOT SUPPLIED
1
Connect the portable device
(MP3/WMA player…) to the RCA audio sockets (white and red) using a JACK/RCA audio cable.
2
3
Press the MUSIC button then press it again or select the Music
Menu function and press the dial to con fi rm.
Music Menu
Select the "External device" function and press the dial to activate it.
External device
4
Select the AUX music source and press the dial to con fi rm. Play begins automatically.
9.68
The display and management of the controls is on the portable device.
2
08 BLUETOOTH TELEPHONE
PAIRING A TELEPHONE
FIRST CONNECTION
* The services available depend on the network, the SIM card and the compatibility of the Bluetooth telephone used. Check the telephone manual and with your network provider for details of the services available to you.
3
For reasons of safety and because they require prolonged attention on the part of the driver, the operations for pairing the Bluetooth mobile telephone to the hands-free system of the MyWay must be carried out with the vehicle stationary. The ignition must be on.
For a fi rst connection, select
"Search phone" and press the dial to con fi rm. Then select the name of the telephone.
Search phone
Visit www.citroen.co.uk for more information (compatibility, more help, ...).
1
Activate the telephone's Bluetooth function and ensure that it is "visible to all" (refer to the telephone instructions).
Press the PHONE button.
4 Enter the authentication code on the telephone.
The code to be entered is displayed on the screen of the system.
Some telephones offer automatic reconnection of the telephone every time the ignition is switched on.
A message con fi rms the pairing.
Pairing can also be started from the telephone (refer to the telephone instructions).
Once the telephone has been connected, MyWay can synchronise the address book and the call list. This synchronisation may take a few minutes * .
To change the telephone connected, press the PHONE button, then select
Phone Menu and press the dial to con fi rm.
9.69
08 BLUETOOTH TELEPHONE
CONNECTING A TELEPHONE
* The services available depend on the network, the SIM card and the compatibility of the Bluetooth telephone used. Check the telephone manual and with your network provider for details of the services available to you.
For reasons of safety and because they require prolonged attention on the part of the driver, the operations for pairing the Bluetooth mobile telephone to the hands-free system of the MyWay must be carried out with the vehicle stationary. The ignition must be on.
Once the telephone has been connected, MyWay can synchronise the address book and the call list. This synchronisation may take a few minutes * .
1
Visit www.citroen.co.uk for more information (compatibility, more help, ...).
1 Activate the telephone's Bluetooth function and ensure that it is "visible to all" (refer to the telephone instructions).
The last telephone connected is reconnected automatically.
A message con fi rms the connection.
2
Press the PHONE button.
2
When a telephone is already connected, to change it press the
PHONE button, then select Phone
Menu and press the dial to con fi rm.
Select "Connect phone". Select the telephone and press to con fi rm.
Connect phone
9.70
The list of telephones connected previously (4 maximum) appears on the multifunction screen. Select the telephone required for a new connection.
1
2
3
08 BLUETOOTH TELEPHONE
RECEIVING A CALL MAKING A CALL
1
Press the PHONE button.
An incoming call is announced by a ring and a superimposed display on the multifunction screen.
Select the "Yes" tab to accept or "No" to refuse and con fi rm by pressing the dial.
Yes No
To hang up, press the PHONE button or press the dial and select "End call" then con fi rm by pressing the dial.
End call
Press the end of the steering mounted control to accept the call or end the call in progress.
2
The list of the last 20 calls made and received in the vehicle appears under Phone Menu. You can select a number and press the dial to make the call.
Select the Phone Menu function and press the dial to con fi rm.
Phone Menu
Select "Dial number", then dial the telephone number using the virtual keypad.
Dial number
It is also possible to select a number from the address book. You can select
"Dial from address book". The MyWay can record up to 1 000 entries
(telephone numbers).
Press the end of the steering mounted control for more than two seconds to gain access to the address book.
It is possible to make a call directly from the telephone; park the vehicle as a safety measure. p on a call number to display a list of actions including:
Delete entry
Delete list
9.71
9.72
3
4
2
1
09 CONFIGURATION
SETTING THE DATE AND TIME
These settings must be entered again if the battery has been disconnected.
Press the SETUP button.
Select the "Date & Time" function and press the dial to con fi rm.
Date & Time
Select the "Set date & time" function and press the dial to con fi rm.
Set date & time
Adjust the settings one by one using the direction arrows and con fi rm by means of the dial.
The SETUP function gives access to the following options: System language, Date & Time, Display (Brightness, Colour, Map colour), Vehicle,
Units, System.
5
Select the "Date format" function and press the dial to con fi rm.
6
Con fi rm the format required using the dial.
Select the "Time format" function and press the dial to con fi rm.
Con fi rm the format required using the dial.
Pressing the SETUP button for more than 2 seconds gives access to:
Description of the unit
GPS coverage
Demo mode
1
10 TRIP COMPUTER
TRIP COMPUTER
Press the MODE button several times in succession until the trip computer is displayed.
- The "vehicle" tab:
The range, the current fuel consumption and the distance remaining.
The average speed, the average fuel consumption and the distance travelled calculated over route "1".
"2" functions for a second route.
Each press of the button at the end of the wiper stalk displays the different trip computer information in succession, according to the screen.
A FEW DEFINITIONS
Range: displays the distance which can travelled with the remaining fuel detected in the tank, basd on the average consumption over the last few miles (kilometres).
This displayed value may vary signi fi cantly following a change in the vehicle speed or the relief of the route.
When the range falls below 20 miles (30 km), dashes are displayed. After fi lling with at least 10 litres of fuel, the range is recalculated and is displayed when it exceeds 60 miles (100 km).
, g, p digits, contact a CITROËN dealer.
Current fuel consumption: only calculated and displayed above
20 mph (30 km/h).
Average fuel consumption: this is the average fuel consumption since the last trip computer zero reset.
Distance travelled: calculated since the last trip computer zero reset.
Distance remaining to the destination: calculated with reference to the fi nal destination, entered by the user. If guidance is activated, the navigation system calculates it as a current value.
Average speed: this is the average speed calculated since the last trip computer zero reset (ignition on).
9.73
9.74
11 SCREEN MENU MAP
1
MAIN FUNCTION
2
OPTION A
3 option A1
3 option A2
2
OPTION B...
3
Within 6 miles (10 km)
3
Within 30 miles (50 km)
3
Within 60 miles (100 km)
1
"Traffic" Menu
2
Messages on route
2
Only warnings on route
2
All warning messages
2
All messages
2
Geo. Filter
3
Within 2 miles (3 km)
3
Within 3 miles (5 km)
1
"Music" Menu
2
Select music
2
Sound settings
3
Balance/Fader
3
Bass/Treble
3
Equalizer
4
Linear
4
Classic
4
Jazz
4
Rock/Pop
4
Techno
Vocal
4
3
Loudness
3
Speed dependent volume
3
Reset sound settings
RADIO
1
"Radio" Menu
2
Waveband
3
FM
3
AM
2
Manual tune
2
Sound settings
3
Balance/Fader
3
Bass/Treble
3
Equalizer
4
Linear
4
Classic
4
Jazz
4
Rock/Pop
4
Techno
4
Vocal
3
Loudness
3
Speed dependent volume
3
Reset sound settings
1
"Navigation" Menu
2
Abort guidance/Resume guidance
2
Destination input
3
Enter new address
4
Country
4
City
4
Street
4
House number
4
Start route guidance
4
Postal code
4
Save to address book
4
Intersection
4
City district
4
Geo position
4
Map
3
Navigate HOME
3
Choose from address book
3
Choose from last destinations
3
TMC station information
2
Stopovers
3
Add stopover
4
Address input
4
Navigate HOME
4
Choose from address book
4
Choose from last destinations
3
Rearrange route
3
Replace stopover
3
Delete stopover
3
Recalculate
4
Fast route
4
Short route
4
Optimized route
2
POI search
3
POI nearby
3
POI near destination
3
POI in city
3
POI in country
3
POI near route
2
Route options
3
Route type
4
Fast route
4
Short route
9.75
4
Optimized route
3
Route dynamics
4
Traf fi c independent
4
Semi-dynamic
3
Avoidance criteria
4
Avoid motorways
4
Avoid toll roads
4
Avoid ferries
3
Recalculate
2
Settings
3
Navi volume
3
POI categories on Map
3
Set parameters for risk areas
4
Display on map
4
Visual alert
4
Sound alert
9.76
1
"Phone" Menu
2
2
Dial from address book
2
Call lists
2
Connect phone
3
Search phone
3
Phones connected
4
Disconnect phone
4
Rename phone
4
Delete pairing
4
Delete all pairings
4
Show details
2
Settings
3
Select ring tone
3
Phone/Ring tone volume
3
Enter mailbox number
1
"SETUP" menu
2
System language *
3
Deutsch
3
English
3
Español
3
Français
3
Italiano
3
Nederlands
3
Polski
3
Portuguese
2
Date & Time *
3
Set date & time
3
Date format
3
Time format
* Available according to model.
2
Display
3
Brightness
3
Colour
4
Pop titanium
4
Toffee
4
Blue steel
4
Technogrey
4
Dark blue
3
Map colour
4
Day mode for map
4
Night mode for map
4
Auto. Day/Night for map
2
Vehicle *
3
Vehicle information
4
Alert log
4
Status of functions
2
Units
3
Temperature
4
Celsius
4
Fahrenheit
3
Metric/Imperial
4
Kilometres (Consumption: l/100)
4
Kilometres (Consumption: km/l)
4
Miles (Consumption: MPG)
2
System
3
Factory reset
3
Software version
3
Automatic scrolling
* Available according to model.
9.77
FREQUENTLY ASKED QUESTIONS
QUESTION
There is a difference in sound quality between the different audio sources (radio, CD...).
ANSWER
For optimum sound quality, the audio settings (Volume, Bass, Treble,
Ambience, Loudness) can be adapted to the different sound sources, which may result in audible differences when changing source
(radio, CD...).
SOLUTION
Check that the audio settings (Volume, Bass,
Treble, Ambience, Loudness) are adapted to the sources listened to. It is advisable to set the AUDIO functions (Bass, Treble, Front-Rear
Balance, Left-Right Balance) to the middle position, select the Linear musical ambience and set the loudness correction to the "Active" position in CD mode or to the "Inactive" position in radio mode.
The CD is ejected automatically or is not played by the player.
The CD is inserted upside down, is unplayable, does not contain any audio data or contains an audio format which the player cannot play.
The CD is protected by an anti-pirating protection system which is not recognised by the audio equipment.
The CD player sound is poor.
The CD used is scratched or of poor quality.
The audio equipment settings (bass, treble, ambiences) are unsuitable.
- Check that the CD is inserted in the player the right way up.
- Check the condition of the CD: the CD cannot be played if it is too damaged.
- Check the content in the case of a recorded
CD: consult the advice in the Audio section.
- The audio equipment's CD player does not play DVDs.
of their quality level, certain writeable CDs will not be played by the audio system.
Insert good quality CDs and store them in suitable conditions.
Set the treble or bass level to 0, without selecting an ambience.
9.78
QUESTION ANSWER
The stored stations do not function (no sound,
87.5 Mhz is displayed...).
An incorrect waveband is selected.
SOLUTION
Press the BAND AST button to return to the waveband (AM, FM1, FM2, FMAST) on which the stations are stored.
The quality of reception of the radio station listened to gradually deteriorates or the stored stations do not function
(no sound, 87.5 Mhz is displayed...).
The vehicle is too far from the transmitter used by the station listened to or there is no transmitter in the geographical area through which the vehicle is travelling.
The environment (hills, buildings, tunnels, basement car parks...) block reception, including in RDS mode.
Activate the RDS function to enable the system to check whether there is a more powerful transmitter in the geographical area.
This phenomenon is normal and does not indicate a failure of the audio equipment.
The aerial is absent or has been damaged (for example when going through a car wash or into an underground car park).
Have the aerial checked by a CITROËN dealer.
Sound cut-outs of 1 to
2 seconds in radio mode.
During this brief sound cut-out, the RDS searches for any frequency permitting better reception of the station.
Deactivate the RDS function if the phenomenon is too frequent and always on the same route.
With the engine off, the audio equipment switches off after a few minutes of use.
When the engine is switched off, the audio equipment operating time depends on the battery charge.
The switch-off is normal: the audio equipment switches to economy mode and switches off to prevent discharging of the vehicle's battery.
Start the vehicle's engine to increase the battery charge.
9.79
QUESTION
TA is selected. However, certain traf fi c jams along the route are not indicated in real time.
ANSWER
On starting, it is several minutes before the system begins to receive the traf fi c information.
In certain countries, only major routes (motorways...) are listed for the traf fi c information.
SOLUTION
Wait until the traf fi c information is being received correctly (displaying of the traf fi c information symbols on the map).
This phenomenon is normal. The system is dependent on the traf fi c information available.
I receive a speed camera alert for a camera which is not on my route.
The system announces all speed cameras located in a conical zone forward of the vehicle. It may detect speed cameras on nearby or parallel roads.
Zoom the map to view the exact position of the speed camera.
The audible speed camera alert is not working.
Activate audible alerts in Navigation Menu,
Settings, Set parameters for risk areas.
The altitude is not displayed.
On starting, the initialisation of the GPS may take up to 3 minutes to receive more than 3 satellites correctly.
Wait until the system has started up completely.
Check that there is a GPS coverage of at least
3 satellites (long press on the SETUP button, then select GPS coverage).
Depending on the geographical environment (tunnel...) or the weather, the conditions of reception of the GPS signal may vary.
This phenomenon is normal. The system is dependent on the conditions of reception of the
GPS signal.
The route is not calculated successfully.
The exclusion criteria may con fl ict with the current location (exclusion of toll roads on a motorway with tolls).
Check the exclusion criteria.
9.80
QUESTION ANSWER
There is a long waiting time after inserting a CD.
When a new medium is inserted, the system reads a certain amount of data (directory, title, artist, etc.). This may take a few seconds.
SOLUTION
This phenomenon is normal.
I cannot connect my
Bluetooth telephone.
The telephone's Bluetooth function may be deactivated or the equipment may not be visible.
- Check that your telephone's Bluetooth function is activated.
- Check that your telephone is visible.
A telephone connected by Bluetooth is inaudible.
The volume level depends on both the system and the telephone.
Increase the MyWay volume setting, possibly to maximum, and increase the telephone volume level if necessary.
9.81
9.82
AUDIO SYSTEM
AUDIO SYSTEM/BLUETOOTH
Your Audio system is coded in such a way that it will y p y another vehicle, contact your CITROËN dealer for con fi guration of the system.
For safety reasons, the driver must carry out operations which require prolonged attention while the vehicle is stationary.
When the engine is switched off and to prevent discharging of the battery, the audio equipment may switch off after a few minutes.
CONTENTS
01 First steps
02 Steering mounted controls
03 Main menu
04 Audio
05 USB Box
06 Bluetooth functions
07 Configuration
08 Trip computer
09 Screen menu map
Frequently asked questions p. p. p. p. p. p. p. p. p. p. 9.103
9.84
9.85
9.86
9.87
9.90
9.93
9.95
9.97
9.98
9.83
01 FIRST STEPS
22
33 44
1
155 144
55 66 77 88
133 122
99
1. On/Off and volume adjustment.
2. CD
3. Selection of the display on the screen from the following modes:
Audio (AUDIO), Trip Computer (TRIP) and
Telephone (TEL) functions.
4. Selection of source: radio, audio CD/MP3 CD, USB, Jack connection, Streaming.
5. Selection of FM1, FM2, FMast and AM wavebands.
6. Setting audio options: front/rear fader, left/ right balance, loudness, sound ambience.
7. Display the list of local stations, of the tracks on the CD or of the MP3 folders.
8. Abandon current operation.
9. TA g fi c Announcement) function on/off.
Long press: access to the PTY (Types of radio programme) mode.
10. Con fi rmation.
11. Automatic search for a lower/higher frequency.
Selection track.
12. Selection of a lower/higher radio frequency.
Selection of the previous/next MP3 folder.
Selection of the previous/next USB device folder/genre/artist/playlist.
9.84
13. Display the main menu.
14. Buttons 1 to 6:
Selection of a stored radio station.
Long press: store a station.
15. The DARK button changes the display on the screen to improve driving comfort at night.
1st press: lighting the upper band only.
2nd press: display of a black screen.
3rd press: return to the standard display.
02 STEERING MOUNTED CONTROLS
RADIO: selection of the previous stored station.
USB: selection of the previous genre/artist/folder from the classi fi cation list.
Selection of the previous item on a menu.
RADIO: selection of the next stored station.
USB: selection of the next genre/artist/folder from the classi fi cation list.
Selection of the next item on a menu.
RADIO: automatic search for a higher frequency.
CD/MP3/USB: selection of the next track.
CD/USB: continuous press: fast forwards play.
Selection of the previous item.
Volume increase.
- Change of sound source.
- Con fi rmation of a selection.
- Press for more than 2 seconds: access to the telephone menu.
Mute: press the volume increase and decrease buttons simultaneously.
The sound is restored by pressing one of the two volume buttons.
Volume decrease.
RADIO: automatic search for a lower frequency.
CD/MP3/USB: selection of the previous track.
CD/USB: continuous press: fast reverse.
Selection of the next item.
9.85
03 MAIN MENU
AUDIO FUNCTIONS : radio,
CD, USB, options.
> MONOCHROME SCREEN C
9.86
TRIP COMPUTER : entering of distances, alerts, status of functions.
> MONOCHROME SCREEN A
TELEPHONE : Bluetooth hands-free, pairing, management of a call.
PERSONALISATION-
CONFIGURATION : vehicle parameters, display, languages.
For a detailed global view of the menus available, refer to the
"Screen menu map" section.
4
3
2
1
04 AUDIO
RADIO
SELECTING A STATION
Press the SOURCE button several times in succession and select the radio.
Press the BAND AST button to select a waveband: FM1, FM2, FMast, AM.
Brie fl y press one of the buttons to carry out an automatic search of the radio stations.
Press one of the buttons to carry out a manual search of the radio stations.
Press the LIST REFRESH button to display the list of stations received locally (30 stations maximum).
To update this list, press for more than two seconds.
The external environment (hills, buildings, tunnels, basement car parks, ...) may block reception, including in RDS mode. This is a normal effect of the way in which radio waves are transmitted and does not indicate any failure of the audio system.
RDS
1
Press the MENU button.
2
Select AUDIO FUNCTIONS then press OK.
3
Select the FM WAVEBAND
PREFERENCES function then press OK.
4
Select ACTIVATE RDS then press OK.
RDS appears on the screen.
The RDS, if displayed, enables you to continue listening to the same station by automatic retuning to alternative fequencies. However, in certain conditions, coverage of an RDS station may not be assured throughout the country as radio stations do not cover 100 % of the territory. This explains the loss of reception of the station during a journey.
9.87
9.88
04 AUDIO
RECEIVING TA MESSAGES
The TA (Traf fi c Announcement) function gives priority to TA alert messages. To operate, this function needs good reception of a radio station transmitting this type of message. When a traf fi c report is transmitted, the current audio source (Radio, CD, ...) is interrupted automatically to play the TA message. Normal playback of the audio source resumes at the end of the transmission of the message.
Press the TA button to activate or deactivate traf fi c messages.
1
CD
PLAYING A CD
Insert circular compact discs only.
Some anti-pirating systems, on original discs or CDs copied using a personal recorder, may cause faults which are no re fl ection on the quality of the original player.
Without pressing the EJECT button, insert a CD in the player, play begins automatically.
To play a disc which has already been inserted, press the SOURCE button several times in succession and select CD.
2
Press one of the buttons to select a track on the CD.
3
Press the LIST REFRESH button to display the list of tracks on the CD.
Press and hold one of the buttons for fast forward or backward.
3
04 AUDIO
1
MP3 CD
PLAYING AN MP3 COMPILATION
Insert an MP3 compilation in the player.
The audio equipment searches for all of the music tracks, which may take anything between a few seconds and several tens of seconds, before play begins.
On a single disc, the CD player can read up to 255 MP3 fi les spread over 8 folder levels. However, it is advisable to keep to a limit of two levels to reduce the access time before the CD is played.
While the CD is being played, the folder structure is not followed.
All of the fi les are displayed on a single level.
To play a disc which has already been inserted, press the SOURCE button several times in succession and select CD.
2
Press one of the buttons to select a track on the CD.
Press the LIST REFRESH button to display the list of directories of the MP3 compilation.
Press and hold one of the buttons for fast forward or backward play.
MP3 CD
INFORMATION AND ADVICE is an audio compression standard which permits the recording of several tens of music fi les on a single disc.
In order to be able to play a recorded CDR or CDRW, when recording, the ISO 9660 level 1.2 or Joliet fi le format is recommended.
If the disc is recorded in another format, it may not be played correctly.
It is recommended that the same recording format is always used for an individual disc, with as low a speed as possible
(4x maximum) for optimum sound quality.
In the particular case of a multi-session CD, the Joliet format is recommended.
The audio system will only play fi les with the extension ".mp3" with a sampling rate of 22.05 KHz or 44.1 KHz. No other type of fi le
(.wma, .mp4, .m3u...) can be played.
It is advisable to restrict fi le names to 20 characters without using special characters (e.g. " ? ; ù) to avoid any playing or displaying problems.
Empty CDs are not recognised and may damage the system.
9.89
05 USB BOX
USING THE USB BOX
1
This unit consists of a USB port and an auxiliary
Jack socket * . The audio fi les are transmitted from portable equipment such as a digital player or a USB memory stick to your Audio system to be listened to via the vehicle's speakers.
2
USB memory stick (1.1, 1.2 and 2.0) or iPod ® of generation 5 or later:
- USB memory sticks should be formatted FAT or FAT 32 (NTFS not supported),
- the iPod lead is essential,
- navigation through the fi le database is by means of the steering mounted controls,
- the iPod software should be regularly updated for the best connection.
3
Other iPod players of earlier generations and players using the MTP protocol * :
- play via Jack-Jack lead only (not supplied),
- navigation through the fi le database is from the portable device.
9.90
p q pp are available from CITROËN dealers.
CONNECTING A USB MEMORY STICK
1
Connect the memory stick to the port, directly or using a lead. If the audio equipment is switched on, the USB source is detected as soon as it is connected. Play begins automatically after a delay which depends on the capacity of the
USB memory stick.
The fi le formats recognised are .mp3 (mpeg1 layer 3 only), .wma (standard 9 only,
128 kbits/sec compression), .wav and .ogg.
The playlists types accepted are m3u, .pls, .wpl.
The system puts together playlists (temporary memory) created over a period which depends on the capacity of the USB device.
The other sources are available during this time.
The playlists are updated each time the ignition is switched off or each time a USB memory stick is connected.
When connecting for the fi rst time, the classi fi cation suggested is by folder. When you reconnect, the classi fi cation selected previously is retained.
* According to vehicle.
2
3
05 USB BOX
USING THE USB PORT
Press and hold LIST to display the different classi fi cations.
Select by Folder/Artist/Genre/Playlist, press OK to select the classi fi cation required, then press OK again to con fi rm.
- by Folder: all folders containing audio fi les recognised on the peripheral device, classi fi ed in alphabetical order without following the fl ow chart.
- by Artist: all of the artist names de fi ned in the ID3 Tags, classi fi ed in alphabetical order.
- by Genre: all of the genres de fi ned in the ID3 Tags.
- by Playlist: in accordance with the playlists recorded on the USB device.
Press LIST brie fl y to display the previously selected classi fi cation.
Navigate through the list using the left/right and up/down buttons.
Con fi rm the selection by pressing OK.
5
Press one of these buttons to gain access to the previous/next track on the classi fi cation list currently being played.
Press and hold one of the buttons for fast forward or backward play.
Press one of these buttons to gain access to the previous/next Genre,
Folder, Artist or Playlist on the classi fi cation list currently being played.
CONNECTING AN iPod ® VIA THE USB PORT
1
The lists available are Artist, Genre and Playlist (as de fi ned on the iPod ® ).
Selection and Navigation are described in steps 1 to 5 above.
Do not connect a hard disk or USB devices other than audio equipment to the USB port. This could damage your installation.
9.91
9.92
2
05 USB BOX
USING THE AUXILIARY INPUT (AUX)
JACK socket or USB port (according to vehicle)
The auxiliary input, JACK or USB, allows the connection of a portable device (MP3 player...).
Do not connect a device to both the JACK socket and the USB port at the same time.
1
Connect the portable device
(MP3 player…) to the JACK socket or to the USB port, using a suitable cable (not supplied).
Press the SOURCE button several times in succession and select AUX.
1
ADJUSTING THE VOLUME OF
THE AUXILIARY SOURCE
First adjust the volume of your portable device.
2
Then adjust the volume of your audio system.
1
2
3
4
06 BLUETOOTH FUNCTIONS
BLUETOOTH TELEPHONE
SCREEN C
(AVAILABILITY DEPENDS ON MODEL AND VERSION)
PAIRING A TELEPHONE
For safety reasons and because they require prolonged attention on the part of the driver, the operations for pairing of the Bluetooth mobile telephone with the Bluetooth hands-free system of your audio equipment must be carried out with the vehicle stationary and the ignition on.
The services offered depend on the network, the SIM card and the compatibility of the
Bluetooth equipment used.
Consult your telephone's manual and your operator to fi nd out which services are y p available from the network. Consult a CITROËN dealer.
The TELEPHONE menu permits access to the following functions in particular: Directory * , Call list, Pairing management.
* If your telephone is fully compatible.
6 Select the telephone to be connected from the list. Only one telephone can be connected at a time.
Activate the telephone's Bluetooth function.
Press the MENU button.
In the menu, select:
- Bluetooth
Audio
- Bluetooth fi guration
- Perform a Bluetooth search
A window is displayed with "Searching...".
7
8
9
10
A virtual keypad is displayed on the screen: enter a code with at least 4 digits.
Con fi rm by pressing OK.
A message is displayed on the screen of the telephone chosen: to accept the pairing, enter the same code on the telephone, then con fi rm by pressing OK.
If pairing fails, the number of attempts is not limited.
"Pairing of Name_telephone successful" appears on the screen.
The automatic connection authorised is only active after the telephone has been con fi gured.
The directory and the call list can be accessed after the synchronisation period.
5 The fi rst 4 telephones recognised are displayed in this window.
The pairing can also be initiated from the telephone.
9.93
06 BLUETOOTH FUNCTIONS
RECEIVING A CALL
1 display on the multifunction screen.
2
Select the YES tab on the display using the buttons and con fi rm by pressing OK.
Press the steering mounted control OK to accept the call.
MAKING A CALL
From the Bluetooth telephone function Audio menu, select Manage the telephone call then Call, Call list or Directory.
2
Press the end of the steering mounted control for more than two seconds to gain access to your directory.
Or
To dial a number, use your telephone's keypad, with the vehicle stationary.
9.94
BLUETOOTH AUDIO STREAMING
Wireless transmission of the telephone's music fi les via the audio equipment. The telephone must be able to manage the appropriate bluetooth pro fi les (Pro fi les A2DP/AVRCP).
1
Initiate the pairing between the telephone and the vehicle. This pairing can be initiated from the vehicle's telephone function menu or via the telephone's keypad. See steps 1 to 10 on the previous pages.
During the pairing phase, the vehicle must be stationary with the key in the ignition.
2
Select the telephone to be connected from the telephone function menu.
The audio system connects to a newly paired telephone automatically.
3
Activate the streaming source by pressing the SOURCE button * . The tracks to be played can be controlled as usual via the buttons on the Radio control panel and the steering mounted controls ** . The contextual information can be displayed on the screen.
* In certain cases, playing of the Audio fi les must be initiated from the keypad.
** If the telephone supports the function.
4
3
2
1
07 CONFIGURATION
SETTING THE DATE AND TIME
SCREEN A
Press the MENU button.
Using the arrows, select DISPLAY
CONFIGURATION.
Press to con fi rm the selection.
Using the arrows, select YEAR.
7
8
5
6
Press to con fi rm the selection.
Adjust the setting.
Press to con fi rm the selection.
Start again from step 1 then set
MONTH, DAY, HOUR, MINUTES.
9.95
9.96
4
3
2
1
07 CONFIGURATION
SETTING THE DATE AND TIME
SCREEN C
Press the MENU button.
Using the arrows, select
PERSONALISATION
CONFIGURATION.
Press to con fi rm the selection.
Using the arrows, select DISPLAY
CONFIGURATION.
7
8
5
6
Press to con fi rm the selection.
Using the arrows, select ADJUST
DATE AND TIME.
Press to con fi rm the selection.
Adjust the settings one by one con fi rming by pressing the OK button. Next select the OK tab on the screen then con fi rm.
08 TRIP COMPUTER
Each press of the button, located at the end of the wiper stalk, displays the different trip computer information in succession, depending on the screen.
MONOCHROME SCREEN A MONOCHROME SCREEN C
Each press displays in succession:
- Range,
- Current fuel consumption,
- Average fuel consumption,
- Average speed.
11
- the "vehicle" tab with:
● the range, the current fuel consumption and the distance remaining to the destination,
- the "1" tab (trip 1) with:
● the average speed, the average consumption and the distance travelled calculated over trip "1" ,
- the "2" tab (trip 2) with the same information for a second trip.
Zero reset
When the required trip is displayed, press the control for more than two seconds.
A FEW DEFINITIONS
Range: displays the distance which can travelled with the remaining fuel detected in the tank, basd on the average consumption over the last few miles (kilometres).
This displayed value may vary signi fi cantly following a change in the vehicle speed or the relief of the route.
When the range falls below 20 miles (30 km), dashes are displayed.
After fi lling with at least 10 litres of fuel, the range is recalculated and is displayed when it exceeds 60 miles (100 km).
, g, contact a CITROËN dealer.
Current fuel consumption: only calculated and displayed above 20 mph (30 km/h).
Average fuel consumption: this is the average fuel consumption since the last trip computer zero reset.
Distance travelled: calculated since the last trip computer zero reset.
Distance remaining to the destination: calculated with reference to the fi nal destination, entered by the user. If guidance is activated, the navigation system calculates it as a current value.
Average speed: this is the average speed calculated since the last trip computer zero reset (ignition on).
9.97
09 SCREEN MENU MAP
MONOCHROME A
1
MAIN FUNCTION
2
OPTION A
3
OPTION A1
3
OPTION A2
2
OPTION B...
1
RADIO-CD
2
RDS SEARCH
2
REG MODE
2
CD REPEAT
2
RANDOM PLAY
1
VEHICLE CONFIG *
2
REV WIPE ACT
2
GUIDE LAMPS
1
OPTIONS
2
DIAGNOSTICS
3
CONSULT
3
ABANDON
1
UNITS
2
TEMPERATURE: °CELSIUS/°FAHRENHEIT
2
FUEL CONSUMPTION:
KM/L - L/100 - MPG
* The parameters vary according to vehicle.
9.98
09 SCREEN MENU MAP
1
DISPLAY ADJUST
2
YEAR
2
MONTH
2
DATE
2
HOUR
2
MINUTES
2
12 H/24 H MODE
1
LANGUAGE
2
FRANCAIS
2
ITALIANO
2
NEDERLANDS
2
PORTUGUES
2
PORTUGUES-BRASIL
2
DEUTSCH
2
ENGLISH
2
ESPANOL
9.99
09 SCREEN MENU MAP
MONOCHROME C
Press the OK dial for access to short-cut menus according to the display on the screen:
RADIO
1
1
1 activate/deactivate RDS activate/deactivate REG mode activate/deactivate radiotext
CD/MP3 CD
1
1 activate/deactivate Intro activate/deactivate track repeat
(the entire current CD for CD, the entire current folder for MP3 CD)
1 activate/deactivate random play
(the entire current CD for CD, the entire current folder for MP3 CD)
1
USB
activate/deactivate track repeat (of the current folder/artist/genre/playlist)
1 activate/deactivate random play (of the current folder/artist/genre/playlist)
9.100
09 SCREEN MENU MAP
MONOCHROME C
Pressing the MENU button displays:
2
PLAY MODES
3 album repeat (RPT)
4
activate/deactivate
3 track random play (RDM)
4
activate/deactivate
1
AUDIO FUNCTIONS
2
FM BAND PREFERENCES
3 alternative frequencies (RDS)
4 activate/deactivate
3 regional mode (REG)
4 activate/deactivate
3 radio-text information (RDTXT)
4 activate/deactivate
1
TRIP COMPUTER
2
ENTER DISTANCE TO DESTINATION
3
Distance: x miles
2
ALERT LOG
3
Diagnostic s
2
STATUS OF THE FUNCTIONS *
3
Functions activated or deactivated
* The parameters vary according to vehicle.
1
PERSONALISATION-CONFIGURATION
2
DEFINE THE VEHICLE PARAMETERS *
2
DISPLAY CONFIGURATION
3 video brightness adjustment
4 normal video
4 inverse video
4 brightness (- +) adjustment
3 date and time adjustment
3 day/month/year adjustment
4 hour/minute adjustment
4 choice of 12 h/24 h mode
3 choice of units
4 l/100 km - mpg - km/l
4
°Celsius/°Fahrenheit
2
CHOICE OF LANGUAGE
9.101
09 SCREEN MENU MAP
1
BLUETOOTH TELEPHONE
2
BLUETOOTH CONFIGURATION
3
Connect/Disconnect a device
3
Telephone function
3
Audio Streaming function
4
Consult the paired device
4
Delete a paired device
4
Perform a Bluetooth search
2
CALL
3
Calls list
4
Directory
2
MANAGE THE TELEPHONE CALL
3
Terminate the current call
3
Activate private mode
9.102
FREQUENTLY ASKED QUESTIONS
QUESTION
There is a difference in sound quality between the different audio sources (radio, CD...).
The CD is ejected automatically or is not played by the player.
ANSWER
For optimum sound quality, the audio settings (Volume, Bass, Treble,
Ambience, Loudness) can be adapted to the different sound sources, which may result in audible differences when changing source
(radio, CD...).
The CD is inserted upside down, is unplayable, does not contain any audio data or contains an audio format which the player cannot play.
The CD is protected by an anti-pirating protection system which is not recognised by the audio equipment.
The message "USB peripheral error" is displayed on the screen.
The Bluetooth connection is cut.
The CD player sound is poor.
The battery of the peripheral may not be suf fi ciently charged.
The USB memory stick is not recognised.
The memory stick may be corrupt.
The CD used is scratched or of poor quality.
The audio equipment settings (bass, treble, ambiences) are unsuitable.
SOLUTION
Check that the audio settings (Volume, Bass,
Treble, Ambience, Loudness) are adapted to the sources listened to. It is advisable to set the AUDIO functions (Bass, Treble, Front-Rear
Balance, Left-Right Balance) to the middle position, select the musical ambience "None" and set the loudness correction to the "Active" position in CD mode or to the "Inactive" position in radio mode.
- Check that the CD is inserted in the player the right way up.
- Check the condition of the CD: the CD cannot be played if it is too damaged.
- Check the content in the case of a recorded CD: consult the advice in the "Audio" section.
- The audio equipment's CD player does not play DVDs.
- Due to their quality level, certain writeable
CDs will not be played by the audio system.
Recharge the battery of the peripheral device.
Reformat the memory stick.
Insert good quality CDs and store them in suitable conditions.
Set the treble or bass level to 0, without selecting an ambience.
9.103
QUESTION ANSWER
The stored stations do not function (no sound,
87.5 Mhz is displayed...).
An incorrect waveband is selected.
SOLUTION
Press the BAND AST button to return to the waveband (AM, FM1, FM2, FMAST) on which the stations are stored.
The traf fi c announcement
(TA) is displayed. I do not receive any traf fi c information.
The radio station is not part of the regional traf fi c information network.
The quality of reception of the radio station listened to gradually deteriorates or the stored stations do not function
(no sound, 87.5 Mhz is displayed...).
The vehicle is too far from the transmitter used by the station listened to or there is no transmitter in the geographical area through which the vehicle is travelling.
The environment (hills, buildings, tunnels, basement car parks...) block reception, including in RDS mode.
The aerial is absent or has been damaged (for example when going through a car wash or into an underground car park).
Sound cut-outs of 1 to
2 seconds in radio mode.
During this brief sound cut-out, the RDS searches for any frequency permitting better reception of the station.
Tune to a radio station which broadcasts traf fi c information.
Activate the RDS function to enable the system to check whether there is a more powerful transmitter in the geographical area.
This phenomenon is normal and does not indicate a failure of the audio equipment.
Have the aerial checked by a CITROËN dealer.
Deactivate the RDS function if the phenomenon is too frequent and always on the same route.
With the engine off, the audio equipment switches off after a few minutes of use.
The message "the audio system is overheated" appears on the display.
When the engine is switched off, the audio equipment operating time depends on the battery charge.
The switch-off is normal: the audio equipment switches to economy mode and switches off to prevent discharging of the vehicle's battery.
Start the vehicle's engine to increase the battery charge.
In order to protect the installation if the surrounding temperature is too high, the audio equipment switches to an automatic thermal protection mode leading to a reduction of the volume or stopping of the playing of the CD.
Switch the audio system off for a few minutes to allow the system to cool.
9.104
Exterior
EXTERIOR
Dimensions 144-147
Accessories 111
Remote control
Changing the battery,
19-20 reinitialisation 20
Key 20
Starting 41
Central locking/unlocking 19, 23
Alarm 21-22
Rear lamps, direction indicators
3rd brake lamp
Changing rear bulbs
Doors, tailgate
Emergency control
42-43, 133
135
131, 134
22-25
25
Number plate lamp 135
Temporary puncture repair kit
Spare wheel, jack, changing a wheel, tools
Inflation, pressures
124
126-130
150
Towing, lifting
Parking sensors
141
91
Brakes, pads
Emergency braking
ABS, EBFD
ASR, ESP
Rear suspension
90, 117
92
92
93
150
84-86
Wiper blade
Door mirrors
Side repeater
140
87
133
Front lamps, foglamps, direction indicators 42-44, 131
Headlamp beam height adjustment 44
Changing front bulbs
Headlamp wash
Snow shield
131-133
45, 116
130
Front doors
Sliding side door
22-23
23-24
Key 20
Opening the bonnet 112
Electric child lock 24
Filler cap, fuel tank
Fuel cut-off, Diesel priming
120-121
121-122
10
Instruments and controls
Instrument panels, screens,
Wiper controls
Automatic wiping
Warning lamps, indicator lamps 28-33
Windscreen/headlamp wash
Indicators, gauge 34-36
Trip computer
Setting the time in the instrument panel 27
Dashboard lighting dimmer
Gear shift indicator
36
37
Starter, ignition switch
45-46
45
45
Section 9
41
Lighting controls 42-43
Automatic illumination of headlamps 44
Foglamps 43
Daytime running lamps 43
Steering mounted controls:
- NaviDrive
- MyWay
- Audio system
Section 9
Section 9
Section 9
Cruise control
Fixed speed limiter
Speed limiter
47-49
49
50-52
Headlamp beam height adjustment 44
Opening the bonnet
Parking brake
112
90
Dashboard fuses, right-hand side 137
Steering wheel adjustment 41
Horn 92
Mat 81
Electric windows, electric mirrors 87-89
Rear view mirror
Toll cards, car park tickets
Child surveillance mirror
88
81
88
Hazard warning lamps 90
Heating, ventilation
53-54
53
54
Air conditioning with separate adjustments 55-57
Demisting/defrosting 59-60
Additional heating 62-63
Cab fittings
- ashtray,
- 12 volt socket,
77-79
Passenger's airbag deactivation 100
Instruments and controls
Courtesy lamps 80, 133
Warning lamp in overhead storage unit 26
Heated seats 66
Rear ventilation 61, 62-63
Screens, display
Setting the time in the screen
Section 9
Section 9
Controls
- alarm
- electric child lock
23
21-22
24
91
93
Technology on board Section 9
- Emergency or assistance call
- NaviDrive
- MyWay
Gearbox 37
10
Interior
INTERIOR
Front seats, adjustments, head restraint
2-seat front bench
Seat belts
65-66
67-68
94-95
Passenger's airbag deactivation 100
Opening the bonnet 112
Rear seats, rear benches
Seat configuration
69-75
76
Rear view mirror
Toll cards, car park tickets
Front courtesy lamp
Changing courtesy lamp bulbs
88
81
80
133 Front, side, curtain airbags 97-100
Rear courtesy lamp
Changing courtesy lamp bulbs
80
133
Seating area fittings
- load space cover,
- coat hook and net fixing,
81-83
- 12 volt socket,
Battery, charging, starting
Passenger compartment fuses
123
138
Parking brake, handbrake
Rear ventilation
90
61
Child seats
Isofix mountings
Rear side windows
101-108
103-105
88
Temporary puncture repair kit
Spare wheel, jack, changing a wheel, tools
124
126-130
Rear suspension
Accessories 111
84-86
TECHNICAL DATA - MAINTENANCE
Warning lamps 28-33
Identification markings, serial number, paint code, tyres 150
Engine fuses 139
Windscreen/headlamp wash, levels 116
Bulbs, lighting, changing bulbs 131-135
Opening the bonnet, stay 112
Technical data - Maintenance
Changing a wiper blade 140
Levels 115-116
- dipstick,
- power steering fluid,
- coolant.
- screen and headlamp wash fluid.
Water bleeding, Diesel filter 118
Checks 117-118
- battery,
- gearbox,
- carbon fi lter, passenger compartment fi lter,
- particle emission filter,
Under the bonnet
- Diesel
- petrol
Fuel cut-off, Diesel priming
Engine technical data
- brake drums, discs.
Emissions controls (EOBD)
113
114
121-122
149
Weights 148
Model code 156
35
141
148
10
Model code
MODEL CODE
Consult your registration certificate.
This table presents the Petrol and Diesel Model Codes.
Vehicle
Body types
6 seats max, short L1
6 seats max, long L2
9 seats max, short L1
9 seats max, long L2
X
X*____/_
XA____/_
XB____/_
XC____/_
XD____/_
XE____/_
X_***_/_
8-9 seats, long L2
Engines
Diesel
1.6 HDi 90
2.0 HDi 120
2.0 HDi 120 with PEF
2.0 HDi 136 with PEF
2.0 HDi 163 with PEF
X_9HU_/_
X_RHK_/_
X_RHG_/_
X_RHR_/_
-
Petrol
2.0 PETROL 140
Versions
X_RFH_/_
X____*/_
The version code is a combination determined by the type of manual gearbox and the associated emissions controls level.
Manual gearbox
5-speed
6-speed
Variants
X____*/_
X____*/_
X_____/*
The variant code is determined in relation to the parameters authorised when the vehicle was manufactured.
PRECAUTIONS...
Precautions
10
This handbook describes all of the equipment available in the whole range.
Your vehicle will be fi tted with some of this equipment described in this document, depending on its trim level, version and the speci fi cation for the country in which it is sold.
The descriptions and illustrations are given without any obligation. Automobiles CITROËN reserves the right to modify the technical speci fi cations, equipment and accessories without having to update this edition of the handbook.
This document is an integral part of your vehicle.
It should be passed on to the new user in the event of sale or transfer.
Automobiles CITROËN declares, by application of the provisions of the European regulation
(Directive 2000/53) relating to End of Life Vehicles, that it achieves the objectives set by this regulation and that recycled materials are used in the manufacture of the products that it sells.
Reproduction or translation of all or part of this handbook is prohibited without written authorisation from Automobiles CITROËN.
Printed in the EU
Anglais
05-11
11JPY.0031
Anglais
2011 – DOCUMENTATION DE BORD
4Dconcept
Diadeis
Seenk
Edipro
CRÉATIVE TECHNOLOGIE
Advertisement