GB
WASHING INSTRUCTIONS
Always disconnect the heatpad before washing.
MACHINE WASHING
Ʒ The heatpad can be machine washed at 30°C with a normal cycle.
Ʒ Only the gentle spin cycle is to be used. DO NOT set an additional spin cycle.
DRYING
Ʒ Set the dryer at a low temperature.
Ʒ Do not apply pegs on the electrical parts when hanging the heatpad to dry in order not
to damage them.
Ʒ DO NOT use the heatpad until it is completely dry.
GB page
DISPOSAL
The product is packaged in recyclable materials. Dispose of it in compliance with the
environmental protection standards.
The product must be disposed of appropriately, in compliance with European
standard 2002/96/EC. The recyclable materials contained in the appliance must be
recovered so as to prevent environmental pollution. For further information, contact
the local disposal body or the appliance dealer.
ASSISTANCE AND WARRANTY
GUARANTEE
1. The appliance is guaranteed for a period of three years from purchase. Your receipt /
invoice is your proof of purchase.
2. The appliance is guaranteed against any defects arising from manufacture during this
period. Should this be evident we will repair or replace it.
3. The guarantee does not apply to instances of customer misuse/abuse.
4. The guarantee does not apply in professional / commercial usage situations.
5. The guarantee does not affect your statutory rights.
INTELLIHEAT
HEATPAD
SERVICING
For repair / replacement under the terms of our guarantee, the appliance must be returned
to the Service Centre accompanied by a valid proof of purchase.
CUSTOMER SERVICE
PO BOX 166 Middlewich-CHESHIRE-CW10 0ZU - Tel:01606 837222
e-mail: info@imetec.co.uk - www.dreamlanduk.co.uk
TYPE E0801 E0802
E0804
5
1
ILLUSTRATIVE GUIDE
GB
E0804
INTELLIHEAT NECK AND
BACK HEATED WRAP
USE
CONNECTING AND REMOVING THE INTELLIHEAT CONTROL
ATTENTION! The heatpad can only be used with the control supplied. The
relative model is specified on the label sewn on the heatpad.
E0801
E0802
INTELLIHEAT HEATPAD
INTELLIHEAT LARGE HEATPAD
• Insert the control connector (6) to the heatpad connector (5), to connect the Intelliheat
control to the connector on the heatpad.
• Insert the plug in the socket.
SWITCHING THE HEATPAD ON AND SELECTING THE TEMPERATURE
• Push down on the ON/OFF
switch (4) to turn the heatpad on.
• The display (1) will light up and the temperature will be automatically set to position 5
which is fast heat.
• Select the desired temperature (from 1 = low, 5 = high. For fast heat up select 5) by pressing
(3) until your chosen temperature lights up on the display (1).
the temperature button
[B]
AUTOMATIC SHUTDOWN
[A]
• The heatpad will provide a 3 hour heat treatment, then it will automatically shut off. The
standby light
(2), will be blue, after the 3 hours of operating to indicate that the product
has switched off automatically.
• Switch the heatpad back on by pressing the On/Off switch twice, and select your
preferred temperature setting. 1 = low heat, 5 = High heat.
SWITCH-OFF
• Switch the heatpad off by pressing the ON/OFF
• Remove the plug from the socket.
switch (4).
CLEANING AND MAINTENANCE
The heatpad is washable. The washing symbols are also on the heatpad care label.
[C]
5
1
4
1 - LED Display
2 - Stand by light
3 - Temperature selector
4 - Power On/Off switch
Do not bleach.
Tumble-dry at less than 40°C.
Do not iron.
Do not dry-clean.
[D]
2
3
6
Wash at 30°C.
Connecting the heatpad
II
4
TECHNICAL DATA
15 W (max. 110 W)
15 W (max. 110 W)
15 W (max. 110 W)
III
GB
HEATPAD INSTRUCTIONS FOR USE
Dear customer, DREAMLAND thanks you for purchasing this product. We are certain you
will appreciate the quality and reliability of this heatpad, designed and manufactured with
customer satisfaction in mind. These instructions for use have been drawn up in accordance
with European standard EN 62079.
IMPORTANT INSTRUCTIONS
KEEP FOR FUTURE USE
ATTENTION!
Instructions and warnings for a safe use.
Please read the operating instructions and safety warnings in
particular before using the appliance and follow these at all times.
Keep this manual and illustrative guide with the appliance for
future consultation. Should you pass the appliance on to another
user, make sure to also include this documentation. Should certain
parts of this user manual be difficult to understand or should
doubts arise, contact the company before using the product, at the
address indicated on the last page.
CONTENTS
SAFETY WARNINGS
SYMBOLS
DESCRIPTION OF THE HEATPAD CONTROL
USING THE HEATPAD
USE
CLEANING AND MAINTENANCE
DISPOSAL
ASSISTANCE AND WARRANTY
ILLUSTRATIVE GUIDE
TECHNICAL DATA
page
page
page
page
page
page
page
page
page
page
1
3
3
3
4
4
5
5
I-II
III
SAFETY WARNINGS
• After having removed the heatpad from its packaging,
verify its integrity based on the drawing and check for any
damage caused during transport. If in doubt, do not use the
appliance and contact the authorised service centre.
• Do not let children play with the packaging! Keep the plastic
wrapping out of the reach of children; risk of suffocation!
1
GB
• Before connecting the heatpad, check that the mains
voltage data reported on the identification plate corresponds
to that of the available electric mains. The identification plate
is attached to the heatpad.
• This heatpad is intended exclusively as a heatpad for home
use. Any other use is improper and potentially dangerous.
• The heatpad is not to be used by persons (including
children) with reduced physical, sensorial or mental abilities,
or with no experience or knowledge, unless supervised by
a person responsible for their safety, supervision or after
having received instructions regarding its use.
• Children must be supervised to ensure they do not play with
the heatpad.
• Do not use the heatpad for ill people, for infants or for
persons who are insensitive to heat.
• This heatpad must not be used by children if the control
devices have not been set beforehand by a parent or guardian
or if the child has not been properly instructed on how to use
the device safely.
WARNING – NOT suitable for children under the age of 3.
Children under the age of 3 must not use the appliance as
they are unable to react in the event of overheating.
•
DO NOT activate the temperature control with wet hands.
•
DO NOT pull the power cord or the appliance itself to
remove the plug from the socket.
• Always disconnect the heatpad from the mains before
cleaning or performing maintenance and when the heatpad
is not in use.
• In case of a fault or malfunctioning of the heatpad, switch
it off and do not tamper with it. If the appliance needs to be
repaired, contact an authorised technical service centre.
• If the power cord is damaged, it must be replaced by an
authorised technical service centre, so as to prevent all risks.
• The heatpad must be used solely with the types of control
indicated on the label.
• Inspect the heatpad frequently to check for signs of wear
•
2
GB
and tear. If such signs are found or if the appliance has been
used incorrectly, contact an authorised technical assistance
centre before continuing to use it.
ATTENTION!
It is recommended that people with pacemakers do not
use the heatpad. Please check with your cardiologist.
• This heatpad is not intended for medical use inside of
hospitals.
DO NOT use the heatpad if it is wet.
•
•
DO NOT use the heatpad to keep animals warm.
•
DO NOT leave the heatpad running while you sleep.
•
DO NOT INSERT PINS OR NEEDLES.
• Application of the heatpad for a long time at high temperature
can burn the skin.
SYMBOLS
Protection class II.
Prohibited actions.
Warning.
Temperature selector (3).
Power ON/OFF (4).
STAND-BY light (2).
DESCRIPTION OF THE HEATPAD CONTROL
1 Temperature display.
3 Temperature selector.
5 Control socket.
2 Stand-by Display.
4 ON/OFF selector.
6 Plug.
USING THE HEATPAD
The heatpad is designed to warm the human body. It allows for targeted application of heat.
The heatpad can be placed on parts of the body, such as: neck, shoulders, back,
abdomen and joints, depending on the relative model.
3
Download PDF