24-port 10/100/1000BaseT/TX Switch
with 2 1000Base SFP Dual Media Ports
User’s Manual
The Signamax 065-7341GF Switch is a 24-port
unmanaged Gigabit switch with 22 10/100/1000BaseT/TX
unmanaged ports plus 2 10/100/1000BaseT/TX /
1000BaseSFP Dual Media ports. It is a powerful
unmanaged switch that can be used for high-speed data
transport for workgroups and branch operations.
This switch also supports two 1000Base SFP
receptacles, which can be used to extend a Local Area
Network (LAN) to two different locations at up to 110 km
distances for fiber backhaul and distributed LAN
solutions. It has a 1U rack mount form factor, with the
rack mounting hardware included.
The Signamax 065-7341GF is the ideal choice for those
who desire to economically deploy distributed Gigabit
Ethernet LANs cost-effectively.
Key features:
Supports twenty-four (24) 10/100/1000 Mbps Gigabit
Ethernet 10/100/1000BaseT/TX PoE/PoE+ ports with 2
1000Base Dual Media SFP receptacles (24 ports total).
48 Gbps switching bandwidth. Full wire-speed nonblocking reception and transmission.
Forwarding rate:
o 1000 Mbps: 1,488,000 pps
o 100 Mbps: 148,800 pps
o 10 Mbps: 14,880 pps
Status LEDs:
o System power
o Link / Activity
Store-and-forward switching method.
Back pressure Flow Control for Half-Duplex mode.
IEEE 802.3x Flow Control for Full-Duplex mode.
Plug and Play.
User Guide:
1. Check the switch:
1. Please check the enclosure, the RJ-45 ports, and
the LED indicators, making sure they are ok.
2. Connect the switch to AC power, making sure the
initialization of the PoE switch occurs as below:
• POW indicator is on and remains on after
connection to AC power.
• Other indicators will be on, then off after one
or two seconds.
2. Cable connection:
1. Connect the Switch to a Computer or other device
by Cat. 5e or better cables.
2. Connect the external power cord to the Switch and
the power cord to AC plug.
3. Turn on the switch.
1) All operation should be provided only by a qualified
service technician.
2) Please avoid having any heavy thing placed on the
3) Do not use this product near water, for example, in
a wet basement or near a swimming pool.
4) Avoid using this product during an electrical storm.
There may be a remote risk of electric shock from
5) For outdoor use, the Switch itself should be housed
inside a protective enclosure.
6) Cutting power during a firmware upgrade can
damage your device.
7) Only use attachments/accessories specified by the
8) Opening the switch or tampering with the warranty
sticker can void your warranty.
Technical Specifications:
Network ports
IEEE 802.3i 10BaseT
IEEE 802.3u 100BaseTX
IEEE 802.3ab 1000BaseT
IEEE 802.3z 1000Base–X (via SFP module)
IEEE 802.3x Flow Control
24 - 10/100/1000BaseT/TX Auto-MDIX
2 - 1000Base SFP receptacles (shared with ports 23
& 24)
:48 Gbps
Network delay:
:Max 20 microsecond
Database size:
:8 K MAC addresses
Forwarding Rates: 1000 Mbps/ 1,488.000 pps, 100
Mbps / 148,800 pps, 10 Mbps /
14,880 pps
LED indicator
Power, Link / Activity
Power supply
Internal, 100-240V, 50/60Hz
Dimensions: 17.3 x 7.09 x 1.73 in. W x D x H
(280 x 180 x 44 mm)
:4.78 lbs (2.17 kg)
Operating Temperature: 32°F~104°F (0°C~40°C)
Storage Temperature: 14°F~158°F (-10°C~70°C)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing
Limited 5-year warranty
Contact Information:
an AESP Company
999 N.W. 159th Drive
Miami, Florida 33169, U.S.A.
Phone: 305-944-7710 Fax: 305-949-4483
Sales: 800-446-2377
Tech. Support: 800-446-2377, ext. 201
E-mail: info@signamax.com
Download PDF