user guide
Manual (DNVM-4) Revision 1 - March, 2015
user’s guide
I mp or t ant E xp or t R e s t ric t ions! C o mm o d it ies,
products, technologies and ser vices contained in
this manual are subject to one or more of the export
control laws and regulations of the U.S. Government
and they fall under the control jurisdiction of either the
US Department of State or the US BIS-Department
of Commerce. It is unlawful and strictly prohibited
to export, or attempt to export or otherwise transfer
or sell any hardware or technical data or furnish any
ser vice to any foreign person, whether abroad or
in the United States, for which a license or written
approval of the U.S. Government is required, without
first obtaining the required license or written approval
from the Department of the U.S. Government having
jurisdiction. Diversion contrary to U.S. law is prohibited.
Objective Lens
(Fine Focus Ajustment)
Manual brightness control
IR On/Off digi-
tal control
Power On/Off
digital control
Battery Housing
Built-in IR illuminator
IR indicator (Red LED)
Power indicator (Green LED)
Rear Ocular (Diopter Adjustment)
• Advanced low-light sensor technology
• High quality optics for maximum light transmission
• Diopter Adjustment for clarity
• Powerful infrared illuminator to allow vision in total darkness
• Lithium battery for extended use (included)
• Ergonomically designed body fits in the palm of your hand
• Adjustable Gain/Brightness control
• Video-out
• Use Day or Night
• Limited two year warranty
The information in this manual furnished for information use only, is subject to
change without notice, is not to be construed as a commitment by ATN Corp.
ATN Corp. assumes no responsibility or liability for any errors or inaccuracies
that may appear in this book.
© 2015 ATN Corp. All right reserved.
Advanced Low-light digital imaging
Lens diameter
42 mm
Field of view
Focus range
2 yard/m to inf.
Diopter adjustment
Power supply
Operating temperature
1 x 3V(CR123A)
-22°F to +140°F/ -30°C to +60°C
7.2”x3”x2.5”/ 183 x 76 x64 mm
1.1 lb / 500 g
* ATN reserves the right to change the above specifications at any time without notice
For today’s budget conscious outdoor enthusiast ATN presents the
DNVM Digital night vision monocular.
Recent advancements in low light digital sensor technology have allowed us to create a new line of night vision monculars that provide the
user with superior clarity and a high light gain at a minimal cost. A wide
array of magnification options combined with a compact, ergonomic
design make the DNVM monocular from ATN an excellent unit for your
night vision needs.
The ATN DNVM is perfect for camping, boating, or home security.
Unpack the device. Remove from carrying case.
Insert the battery, as follows:
1) Unscrew the battery compartment cover.
2) Insert the battery in the battery compartment observing the right
polarity, which is shown on the side of the unit.
3) Reattach the battery compartment cover.
After installing the battery, DNVM is ready for use.
• Remove the lens cap. (please
Power On/Off
note one of the advantages of usdigital control
ing a digital night vision unit is you
can use during the daytime without worry of damage)
• To turn on the device push the
IR On/Off digibutton marked “ON”. After this
tal control
you can start observing. The lit
screen of the digital unit means
that the device is working normally. The power indicator LED will
glow green.
• To turn off the device push the button marked “ON” again. The
lit screen will go dark. The green power indicator LED will turn off.
• Your digital unit has two focusing methods. Distance and diopter.
Your front lens works as your distance focus and your eyepiece is
your diopter.
• Turn eyepiece to ensure clear screen image.
• Turn front lens to obtain a sharp image of viewed objects.
In dark environments to achieve maximum performance turn on the
IR illuminator.
• Turn on the IR illuminator push the button marked “IR”
• The IR indicator light will show red when illuminator is on.
• Turn off the illuminator push the button marked “IR” button again.
The red power indicator LED will turn off.
The DNVM have an advanced
manual gain /brightness adjustadjustment wheel
ment wheel. This wheel will allow
you to be able to maximize the
DNVM brightness to area you are
viewing. Turn the wheel back and
forth while viewing through the
device to lower or increase the
brightness of the unit. Too much
gain will give you a white or washed out image. Too low of a gain will
produce a black or snowy/grainy image.
To make a video connection:
1) Insert a composite video cable to the
Video-out jack on the DNVM.
2) Connect the other end of the cable
to the TV/monitor video input jack.
• If the device will not be in use for extended period of time (more than
10 days) remove the battery. This will prevent leakage of the battery
and damage of contacts in the battery compartment.
• Avoid touching of lenses. If fingerprints or traces of dirt or dust appear,
clean their surface with a Photographic lens cleaning tissue.
• Keep lens cap/daylight filter on when not in use.
• The DNVM is not harmful to the user or the environment.
• Do not disassemble: it will void your warranty.
• Evaluate the scope functionality by looking through it in a lit environment
• Adverse atmospheric conditions such as fog, smog, or haze and a
lack of ambient light (moon or starlight) may diminish the effective
viewing distance.
• If you use the rubber eyecaps for a long period of time, you may suffer skin inflammation. If you develop any symptoms, consult a doctor
Q: Image dark/grainy
S: Turn on IR illuminator. Increase gain by adjusting the manual gain/
brightness adjustment knob
Q: Image white/washed out
S: Turn off IR illuminator. decrease gain by adjusting the manual gain/
brightness adjustment knob
This product is guaranteed to be free from manufacturing defects in
material and workmanship under normal use for a period of 2 (two)
years from the date of purchase. In the event a defect that is covered
by the foregoing warranty occurs during the applicable period stated
above, ATN, at its option, will either repair or replace the product, and
such action on the part of ATN shall be the full extent of ATN’s liability,
and the Customer’s sole and exclusive remedy. This warranty does not
cover a product (a) used in other than its normal and customary manner;
(b) subjected to misuse; (c) subjected to alterations, modifications or
repairs by the Customer of by any party other than ATN without prior
written consent of ATN; (d) special order or “close-out” merchandise
or merchandise sold “as-is” by either ATN or the ATN dealer; or (e)
merchandise that has been discontinued by the manufacturer and
either parts or replacement units are not available due to reasons
beyond the control of ATN. ATN shall not be responsible for any defects
or damage that in ATN’s opinion is a result from the mishandling,
abuse, misuse, improper storage or improper operation, including use
in conjunction with equipment which is electrically or mechanically
incompatible with or of inferior quality to the product, as well as failure to
maintain the environmental conditions specified by the manufacturer.
This warranty is extended only to the original purchaser. Any breach of
this warranty shall be waived unless the customer notifies ATN at the
address noted below within the applicable warranty period.
The customer understands and agrees that except for the foregoing
warranty, no other warranties written or oral, statutory, expressed or
implied, including any implied warranty of merchantability or fitness
for a particular purpose, shall apply to the product. All such implied
warranties are hereby and expressly disclaimed.
ATN will not be liable for any claims, actions, suits, proceedings,
costs, expenses, damages or liabilities arising out of the use of this
product. Operation and use of the product are the sole responsibility
of the Customer. ATN’s sole undertaking is limited to providing the
products and services outlined herein in accordance with the terms
and conditions of this Agreement. The provision of products sold and
services performed by ATN to the Customer shall not be interpreted,
construed, or regarded, either expressly or implied, as being for the
benefit of or creating any obligation toward any third party of legal
entity outside ATN and the Customer; ATN’s obligations under this
Agreement extend solely to the Customer. ATN’s liability hereunder
for damages, regardless of the form or action, shall not exceed the
fees or other charges paid to ATN by the customer or customer’s
dealer. ATN shall not, in any event, be liable for special, indirect,
incidental, or consequential damages, including, but not limited
to, lost income, lost revenue, or lost profit, whether such damages
were foreseeable or not at the time of purchase, and whether or
not such damages arise out of a breach of warranty, a breach
of agreement, negligence, strict liability or any other theory of
In order to validate the warranty on your product, ATN must receive
a completed Product Warranty Registration Card for each unit or
complete warranty registration on our website at
Please complete the included form and immediately mail it to our
Service Center: ATN Corporation, 1341 San Mateo Avenue, South San
Francisco, CA 94080.
To obtain warranty service on your unit, End-user must notify ATN
service department by calling 800-910-2862 or 650-989-5100 or
via e-mail to receive a Return Merchandise
Authorization number (RMA). When returning please take or send the
product, postage paid, with a copy of your sales receipt to our service
center, ATN Corporation at the address noted above. All merchandise
must be fully insured with the correct postage; ATN will not be
responsible for improper postage or, missing or damaged merchandise
during shipment. When sending product back, please clearly mark
the RMA# on the outside of the shipping box. Please include a letter
that indicates your RMA#, Name, Return Address, reason for service
return, Contact information such as valid telephone numbers and/or
e-mail address and proof of purchases that will help us to establish
the valid start date of the warranty. Product merchandise returns
that do not have an RMA listed may be refused or a significant
delay in processing may occur. Estimated Warranty service time is
10-20 business days. End-user/customer is responsible for postage
to ATN for warranty service. ATN will cover return postage/shipping
after warranty repair to end-user/customer only if product is covered
by aforementioned warranty. ATN will return product after warranty
service by domestic UPS ground and/or domestic mail. Any other
requested or required shipping method the postage/shipping fee will be
the responsibility of the end-user/customer.
For customer service and technical support,
please contact
American Technologies Network Corp.
1341 San Mateo Avenue, South San Francisco,
CA 94080, USA
phone: 800-910-2862, 650-989-5100
fax: 650-875-0129
©2015 ATN Corporation
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF