Owner’s Manual
7000 Series C-I Cycle
Item #53079
March 2, 2014
www.yorkfitness.com
Table of Contents
Congratulations on
purchasing your exercise
equipment from
You have chosen a high quality, safe and innovative piece
of equipment as your training partner and we are certain
it will keep you motivated on the way to achieving your
personal fitness goals.
Please take the time to read this owner’s manual as it
will help you to get the most out of your new exercise
equipment.
For more information visit www.yorkfitness.com
CONTENTS
Safety information 03
Customer support
04
Assembly Instructions
05
Operational Instructions
12
Troubleshooting16
Fitness Guide
18
Exploded Drawing
20
Part List
22
Protect the environment by not disposing
of this product or batteries with household
waste. Check your local authority for
recycling advice and facilities.
2
www.yorkfitness.com
Safety Information
Please read this instruction manual before you begin
assembly. Great care has been taken to design these
instructions and following them will help you with quicker
assembly and minimize the risk of injury.
It is important that you keep these instructions for future
reference.
This list is not exhaustive - You are responsible for your own
safety!
• Always assemble and operate the equipment on a level
surface.
• Ensure the equipment is stable before use.
• Always ensure that the equipment has adequate space
on each side.
• The safety level of this equipment can only be
maintained if it is regularly examined for wear and tear.
• Replace defective components immediately and keep
the equipment out of use until it is repaired.
• Use only the adjustment setting as described in the
instructions. Always use the correct adjustment pin /
fixing.
• Always check that any pins / fixings are tight and secure
before use and after adjustment.
• Never leave any adjustment devices projecting from the
equipment.
• Always consult your doctor before undertaking any
exercise program.
• Always wear suitable clothing and footwear. (e.g.
tracksuit / shorts / training shoes)
• Remove all personal jewelry before exercising.
• Ensure you warm-up well before using the equipment
as this will help to prevent muscle strain.
• After eating, allow 1-2 hours before exercising as this
will help to prevent muscle strain.
• Never overload the equipment. (See maximum user
weight)
• If children are allowed to use the equipment, their
mental and physical development and above all their
temperament should be taken into account. They
should be controlled and instructed in the correct use of
the equipment.
• The equipment is under no circumstances suitable as a
children’s toy.
• Children should not be allowed on or around the
equipment, especially when it is not in use.
• This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person
responsible for their safety.
• This product is not suitable for therapeutic purposes.
• This product has been tested for use in a home
environment and is warranted for In Home, personal,
family or household use.
• Due to our continuous policy of product development,
York Fitness reserves the right to change specifications
without notice.
CAUTION! The instructions must be followed carefully in
the assembly, use and maintenance of your equipment.
The warranty does not cover damage due to negligence of
the assembly, adjustment and maintenance instructions
described herein.
Maximum user weight: 180kg
Safety Standards
This equipment meets the requirements of the EU’s EMC
and Low Voltage directives (where applicable), CLASS SB
EN957-1: 2005&EN957-5:2009. Therefore the equipment
carries the following marks:
• Never use the equipment in any other manner other
than the ways explained in these instructions and any
wall-chart supplied.
• Injuries to health may result from incorrect or excessive
training.
• Parents and others in charge of children should be
aware of their responsibility, because the natural play
instinct and the fondness of experimenting of children
can lead to situations and behavior for which the
training equipment is not intended.
www.yorkfitness.com
3
Customer Support
Should you require any assistance regarding this product please gather the following information and then contact us
using the details below:
• Serial No. - This can be found on the sticker below, located as indicated.
• Original purchase date
• Place of purchase
• Information about the place and conditions of use
• Precise description of the issue / defect
Product’s Name
Use only on a level surface
Not suitable for therapeutic purpose
Manufacturer:
Contact:
Product Name:
Max User Weight:
Safety Standards:
Electrical Info:
YORK BARBELL
York Way, Daventry, England, NN11 4YB
7000 Series C-I Cycle
180KG
CLASS SB EN957-1: 2005&EN957-5:2009
Selfgen, 9V, 3A
SERIAL NO:
53079-
Serial Number
Underside of the
main body.
This product label is an example only, it is not the
real product name and serial number of the item
you have bought.
IMPORTANT!! - Please retain your sales receipt, York Fitness Customer Care may request proof of purchase to validate
eligibility for warranty service. Warranty cover starts from the date shown on the proof of purchase.
ENGLAND
AUSTRALIA
The best way to contact us is via the website:
www.yorkfitness.com
The best way to contact us is via the website:
www.yorkfitness.com.au
York Barbell UK Ltd.
York Way, Daventry,
England, NN11 4YB
Tel: 0844 225 3112
York Fitness Australia
1/2 Swaffham Rd, Minto,
PO Box 5130, NSW 2566
Tel: 1800 730 149
4
www.yorkfitness.com
Assembly Instructions
PREPARE YOUR WORK AREA - It is important you assemble the product in a clean and uncluttered space.
WORK WITH A FRIEND - We recommend you have someone assist you with the assembly as some of the components are
quite heavy.
OPEN THE CARTON - Check any warnings on the carton and make sure you have it the right way up.
UNPACK THE CARTON - Remove all the parts and lay them out on the floor.
Make sure you have the following parts:
Z
H
B
G
A
I
C
F
N
R
E
O
P
www.yorkfitness.com
Q
5
BLISTER PACK
Assembly Instructions
STEP 1
8 x N-1
M8*20L
8 x N-3
D16
8 x N-2
D15.4
STEP 3
4 x N-4
M8*50L
4 x N-3
D16
4 x N-2
D15.4
STEP 4
4 x N-2
D15.4
4 x N-3
D16
N-7
4 x N-1
M8*20L
2 x N-5
M5*15L
N-6
6
www.yorkfitness.com
53079
KH-815G0
1
Z
N-1
N-2
N-3
N-1 x 8
F
E
N-2 x 8
N-3 x 8
2
G
G-3
G-4
H
A
Z
B
www.yorkfitness.com
7
Assembly Instructions
3
A
C
O
R C-3
C-4 B C-2
C
O
N-3
N-2
N-4
D-14
D-6
N-4 x 4
N-2 x 4
N-3 x 4
4
B
N-5
P
N-1
N-2
N-3
N-1 x 4
4-2
4-1
B
N-1
N-2
N-3
N-2 x 4
N-3 x 4
N-5 x 2
8
A
B
C
www.yorkfitness.com
D
5
A-1
C-4
B-3
I-2
C-2
R
I-2
A-2 x 6
pre-installed
6
L
L
I-1
A-3
Q
www.yorkfitness.com
9
Assembly Instructions
Final Check
Your equipment is now assembled. Please make the following
final checks:
• Make sure all screws / bolts are tightened.
• Make sure the equipment is on a flat, level surface.
Care & Maintenance
• This equipment should not be placed outdoors, in a garage or an outbuilding. Keep the equipment in a dry place
with as little temperature variation as possible.
• We recommend placing a mat beneath the equipment to protect both the equipment and your flooring.
• Always place the equipment in a dry environment.
• Use a warm, damp cloth to keep the product clean.
• No wet cleaning of electrical components. Unplug before any care and maintenance.
• The safety level of the equipment can be maintained only if it is regularly examined for damage and wear. This
includes any ropes, pulleys, nuts, bolts, moving parts, bushes, chains, wheels, bearings & connection points etc.
• Ensure that you inspect the product regularly - at least once a week is recommended.
• Ensure that all fixings are tight before use.
• Always replace damaged / worn components with original parts from the manufacturer.
10
www.yorkfitness.com
Batteries Replacement Instructions:
WARNING: The equipment use NiMH batteries. Using
other types of batteries during charging will damage the
equipment.
DO NOT USE ALKALINE BATTERIES IN THIS PRODUCT.
1.
Open the battery compartment under the equipment.
2.
Remove batteries.
3.
Insert 7.4V, 1300mAh Li-ion batteries ensuring you
match the polarity markings (+ and -) on the batteries
with the indicators in the battery compartment. Push
flat end ( - ) against spring and when clear push other
end into holder.
4.
Close the battery compartment.
Tips & Warnings
• Always change all the batteries at the same time.
• Always use the same type of batteries.
• Never recharge Alkaline AA batteries.
• Do not try to heat, ignite, disassemble or throw AA batteries
into a fire.
D-12
1
Protect the environment by not disposing of
this product or batteries with household waste.
Check your local authority for recycling advice
and facilities.
6
www.yorkfitness.com
2
D-11
3
5
4
11
Operational Instructions
Console:
CAUTION: Read and understand user’s manual before using this machine. Keep away from children.
Do not use this machine if you have an acute illness, cold or fever. Stop exercising immediately if:
You feel faint or dizzy / You exceed your maximum heart rate set by your physician
%
PR O G R AM S
HR C
S TART
WAT T
MODE
USER
GO A L
STO P
UP
DOWN
Key Function:
KEYS
FUNCTIONS
MODE
• Confirm setting or selection
• Lock workout value scan function during workout
LEVEL UP/DOWN
• P. During program setup, press UP/DOWN key to adjust the following: Time / Distance /
CALORIE / LEVEL profile /WATT/ AGE / WEIGHT / Gender/THR PCT
• After program started, press UP/DOWN key to adjust the resistance level.
• level adjustment = 1
PROGRAMS
• Press PROGRAMS key to select PROGRAM P 1~P 12
HRC
• Press HRC key to select THR 60 PCT, THR70 PCT, THR 80 PCT, THR 70 PCT
WATT
• Press WATT key to select WATT MODE
USER
• Press USER key to select USER U 1~ U 7
GOAL
• Press GOAL key to select GOAL MODE
START
• Start workout
STOP
• Pause or Stop the training
• Press and hold “STOP” key for 2 seconds to back to IDLE MODE
• When the parameter is set, this key to return to the previous option set
12
www.yorkfitness.com
Display:
DISPLAY
DESCRIPTION
SCAN
• When Scan is activated will show the data in order: Level, Watt, Distance, Calorie, Scan icon will
be on when Scan mode is activated.
• Scan mode in which each of the four pieces of data will display for 3 seconds, then switch to the
next set of data
TIME
• Workout time displayed or time countdown during exercise.
• Setting range 0:00 ~ 99:00(MINUTES)
DISTANCE
(DIST.)
• Workout distance displayed or distance countdown in goal mode.
CALORIE
(CAL.)
• Burned calories during workout display or calories countdown in goal mode.
SPEED
• Workout speed displayed during exercise.
• Setting range 0.0 ~ 99.9(KM)
• Setting range 10 ~ 9990(CAL)
• Display range 0.0~99.9(KPH)
RPM
• Workout revolutions per minute displayed during exercise.
• Display range 0~999
LEVEL
• Workout resistance level
• Setting range 1~ 40
WATT
• Workout watt displayed during exercise
• Setting range 50~350
PULSE
• Pulse bpm displayed during exercise
• Heart signal twinkle
• Display range:0~220(BPM)
• No pulse bpm displayed “P”
Power On
Plug in power supply and the computer will power on and display all segments for 2 seconds. MW will show “YORK
FITNESS” one time, Then press UP/DOWN key to set Gender>Age>Weight when the user power on the monitor for the first
time.
General Saving Mode
1.
The LCD monitor will into General Saving mode after 5 minutes of inactivity.
2.
Press on any key or detect the speed signal input to wake the monitor.
Idle Mode
Dot Matrix window cyclically to display program profile. The text of the flow display “SELECT PROGRAM OR QUICK START”.
When pause and stop the machine, after 5 minutes of inactivity into to IDLE mode.
www.yorkfitness.com
13
Operational Instructions
Quick Start
1.
Press START key to begin workout.
2.
Press UP / DOWN key to adjust resistance level profile.
3.
Press STOP key to pause workout. And again press the STOP key to stop the machine.
Goal Mode
1.
Press GOAL key to select GOAL mode and press MODE key to confirm.
2.
Press UP / DOWN key to set Time > Distance > Calorie. Press the START KEY after setting (The last setting items for the
effective setting).
3.
Press START key to accept current default values and begin workout.
• Default TIME = 20 minutes
• Default LEVEL = 1
4.
Press UP / DOWN key to adjust resistance level profile.
5.
Press STOP key to pause workout. And again press the STOP key to stop the machine.
Programs Mode
1.
Press PROGRAMS key to select preset program (P 1~P 12) and press MODE key to confirm.
2.
Press UP/DOWN key to set Time. And press MODE key to confirm.
3.
Press START key to accept current default values and begin workout.
• Default TIME = 20 minutes
• Default profile= LEVEL Profile
4.
Press UP / DOWN key to adjust resistance level profile.
5.
Press STOP key to pause workout. And again press the STOP key to stop the machine.
14
P1
P2
P3
P4
P5
P6
P7
P8
P9
P10
P11
P12
www.yorkfitness.com
Watt Mode
1.
Press WATT key to select WATT mode and press MODE key to confirm.
2.
Press UP / DOWN key to set Time > Target Watt value. And press MODE key to confirm each setting.
3.
Press START key to start workout.
4.
Press UP / DOWN key to adjust target WATT value.
5.
Press STOP key to pause workout. And again press the STOP key to stop the machine.
User Mode
1.
Press USER key to select USER U 1-U 7, and press MODE key to confirm.
2.
Press UP / DOWN key to set Gender>Age>Weight>Time, and press MODE key to confirm each setting.
3.
Press UP / DOWN key to set resistance level of each column and press MODE key to select the next column. Repeat
this step for all 24 columns.
4.
Press START key to start workout.
5.
Press UP / DOWN key to adjust resistance level profile.
6.
Press STOP key to pause workout. And again press the STOP key to stop the machine.
HRC Mode, HRC wireless receiver built-in with chest belt
1.
Press HRC key to select H1: THR 60 PCT, H2: THR 70 PCT,H3: THR 80 PCT and H4: THR 70 PCT
2.
Press UP / DOWN key to set PCT(This pct entry is for H4 only), THR 70 will blink(70 is the default PCT) and the user
may press UP/DOWN key to set new pct.
3.
Press START key to start workout. If user presses start and a chest strap HR is not received then the MW displays
“CHEST STRAP MUST BE WORN FOR THIS PROGRAM”. If user presses start and a chest strap HR is detected then begin
HR control.
4.
Press START key to start workout.
5.
Press UP / DOWN key to adjust resistance level profile.
6.
Press STOP key to pause workout. And again press the STOP key to stop the machine.
Built in Wireless Heart Rate Receiver
This machine is equipped with a built-in receiver for your heart rate monitoring. To get an accurate reading using
these devices, you will need to be within 90cm of the console, and a minimum of 120cm from others using a heart
rate monitoring device. (Note: The transmitter may fluctuate erratically if you are too close to other
Chest belt is not included into packing.
www.yorkfitness.com
15
Troubleshooting
If you have a problem with your exercise equipment, before you do anything else please check that all the cables
have been connected correctly. Loose cables are very common and many problems can be solved by making sure
the cables are properly connected.
The following table details the most common problems and how to fix them. If you still have a problem after going through
the troubleshooting guide please call your local YORK distributor for advice.
PROBLEM
CAUSE
CORRECTION
NO DISPLAY
No power
Keep pedaling, and make sure RPM is above 15
Rechargeable battery is out of power or
damaged.
Please use machine every three months at least
to charge battery or change new battery
NO SPEED
DISPLAY
Wires are damaged or not connected properly
Verify all wires are connected properly
Speed sensor is too far from magnet
Contact your local YORK distributor
NO PULSE
SIGNAL
Wires are damaged or not connected properly
Verify all wires are connected properly
Too much hand movement
Grip steadily
Palms too wet
Dry palms
Hand Pulse Sensor is being gripped too tightly
Grip using moderate pressure
E1
16
EEPROM error message (MCU error)
www.yorkfitness.com
Notes
www.yorkfitness.com
17
Fitness Guide
Starting and Finishing Your Workout
Begin and end each workout with a Warm Up / Down session - a few minutes of stretching to help prevent strains, pulls and
cramps.
Correct Cycling Form
Sit on the cycle, with your feet on the pedals and inside the pedal straps.
Ensure that the seat height is adjusted correctly - you should be stable and balanced whilst on the saddle. The basic rule for
getting the seat height right is that as the pedal reaches its lowest point, the leg is almost straight.
Try to ensure that your back is straight whilst exercising, especially for long periods.
Suggested Stretches
The correct form for several basic stretches is shown at the right. Move slowly as you stretch—never bounce.
4. Inner Thigh Stretch
1. Hamstring Stretch
2. Calf/Achilles Stretch
3. Quadriceps Stretch
With one leg in front of the
With one hand against a wall
Sit with the soles of your
Sit with one leg extended.
for balance, reach back and
feet together and your
other, reach forward and
Bring the sole of the
grasp one foot with your
knees outward. Pull your
place your hands against
opposite foot toward you
other hand. Bring your heel
feet toward your groin area
and rest it against the inner a wall. Keep your back leg
as close to your buttocks as
as far as possible. Hold
straight and your back foot
thigh of your extended leg.
possible. Hold for 15 counts,
for 15 counts, then relax.
flat on the floor. Bend your
Reach toward your toes
then relax. Repeat 3 times
Repeat 3 times. Stretches:
front leg, lean forward and
as far as possible. Hold
move your hips toward the
for each leg. Stretches:
Quadriceps and hip
for 15 counts, then relax.
muscles.
wall. Hold for 15 counts,
Quadriceps and hip muscles.
Repeat 3 times for each
then relax. Repeat 3 times
leg. Stretches: Hamstrings,
for each leg. To cause
lower back and groin.
further stretching of the
achilles tendons, bend
your back leg as well.
Stretches: Calves, achilles
tendons and ankles.
18
www.yorkfitness.com
How Long Should I Exercise For?
That really depends on your current level of fitness. If you’re just starting out on a new exercise program, you should start
gradually and build up - do not try to do too much too quickly. 30 minutes, 3 times a week should be enough.
Don’t push yourself too hard - you should never feel exhausted during or following exercise.
Heart Rate Training
To get the most out of your new piece of fitness equipment and see the best results from your training you should exercise
at the right level of effort, and that means listening to your heart! Working out to a target heart rate means you can direct
your workout to achieve different goals:
Good health - For those wishing to improve quality of life and general well being. Your sessions will need to be done at an
intensity of between 50 - 60% of your estimated maximum heart rate, should last about 30 minutes and can be done on
most days of the week.
Weight loss - To see a significant reduction in body fat, your sessions must be a little more intense - between 60 and 70% of
your estimated maximum heart rate. These sessions can also be performed on most days of the week for up to 30 minutes.
Improving fitness levels - These sessions should be performed at 70 - 80% of your estimated maximum heart rate and can
also involve bouts of interval training that would have your heart rate peaking for short times near your maximum heart
rate level. These are intense sessions and will require at least a 48 hour rest between sessions.
Calculating Your Target Heart Rate
First, you need to find your estimated maximum heart rate using the formula “220 minus your age in years”. So, if you are 35
years old your estimated maximum heart rate is:
220 - 35 = 185 beats per minute (bpm)
Next, to calculate your target heart rate, simply multiply your estimated maximum heart rate (185bpm) by the applicable
percentage. So, if your goal is better health:
185 x 60% = 111bpm
NOTE: The important issue to remember with all estimated calculations is that they are just estimates
- if you don’t feel comfortable exercising at your target then reduce it to a level you are comfortable
with.
Heart rate training requires you to monitor your heart rate throughout the workout. For this we
recommend using a chest strap (if your machine has a wireless receiver) or a heart rate monitor. For
more information please get in touch using the Contact Us details.
Always consult your doctor before undertaking a new exercise regime. If you experience nausea,
dizziness or other abnormal symptoms during exercise, stop at once and consult your doctor.
www.yorkfitness.com
19
Exploded Drawing
B
A
N-5
P
N-1
N-2
N-3
C
G
R C-3
H
O
I-2
Z
N-4
N-2
N-3
E
N-3 N-2 N-1
I-1
Q
20
www.yorkfitness.com
F
D
J
D-4
C
J-5
D-2
J-6
J-7
J-1
J-8
C-2
C-4
D-3
C-1
D-1
J-3
C-3
D-5
D-6 D-7
D-8
D-9 D-10 D-11 D-12 D-13 D-14
J-4
J-2
A
B
G
R
A-1
G-1
A-2
G-2
G-3
A-3
M
M-1
L
B-3 B-4 B-1
L-13 L-14
L-1
L-2
K
L-3
K-2
M-3
L-4
K-4
M-2 M-7
L-5
K-9
L-7
K-10
F
L-10 L-9 L-8 L-7 L-6
H-2
H-1
K-5
L-12
L-11
M-6
H
K-1
M-2
M-4
M-5
G-4
B-2
K-11
K-12
K-7 K-6
K-3 K-8
P
E
E-8
E-1 E-2
F-2
E-5
F-1
F-3
E-6
E-4
E-7
F-4 F-5
E-9
E-3
Q
O
I
I-1
www.yorkfitness.com
I-2
21
Part List
YORK REF.
REF.
DESCRIPTION
QTY.
YORK REF.
REF.
DESCRIPTION
53079-001
A
COMPUTER SET
1
53079-053
H-2
CAP (25*50*26L)
QTY.
2
53079-002
A-1
COMPUTER (AA00330)
1
53079-054
I
PEDAL SET (JD-36A)
1
53079-003
A-2
BOLT (M6*12L)
6
53079-055
J
CHAIN COVER SET
1
53079-004
A-3
VOICE CABLE (400L)
1
53079-056
J-1
RIGHT CHAIN COVER (534.7*502*82.7)
1
53079-005
B
FIXED HANDLEBAR SET
1
53079-057
J-2
LEFT CHAIN COVER (534.7*502*78.1)
1
53079-006
B-1
FOAM (3T)
1
53079-058
J-3
FRONT RIGHT DECORATIVE COVER (338.3*68*420.5)
1
53079-007
B-2
HANDLE PULSE (PE18)
2
53079-059
J-4
FRONT LEFT DECORATIVE COVER (338.3*72.2*420.5)
1
53079-008
B-3
HANLDPULSE CABLE (700L)
2
53079-060
J-5
SCREW (ST4.2X1.4X20L)
13
53079-009
B-4
SCREW (ST4*1.41*25L)
2
53079-061
J-6
PIN (D6*26.5*7.7)
3
53079-010
C
HANDLEBAR POST SET
1
53079-062
J-7
WASHER RING (117*58*9.3)
1
53079-011
C-1
HANDLEVAR POST
1
53079-063
J-8
REAR COVER (137.2*61.2*158.3)
1
53079-012
C-2
UPPER COMPUTER CABLE (900L)
1
53079-064
K
CRANK SET
1
53079-013
C-3
BOLT (M5*0.8*15L)
2
53079-065
K-1
BELT (995 J6 (390))
1
53079-014
C-4
SENSOR CONNECTING CABLE (1000L)
1
53079-066
K-2
BELT WHEEL (D260*19)
1
53079-015
D
MAIN FRAME SET
1
53079-067
K-3
CRANK AXLE WELDING SET
1
53079-016
D-1
MAIN FRAME (JD-9115)
1
53079-068
K-4
BOLT (M6X1.0X15L)
4
53079-017
D-2
BEARING (#6004-2RS(C0))
2
53079-069
K-5
ANTI-LOOSE NUT (M6X1.0X6T)
4
53079-018
D-3
KNOB (D50XM16X22XD8)
1
53079-070
K-6
C-RING (D22.5*D18.5*1.2T)
2
53079-019
D-4
INNER TUBE (40X80X129)
1
53079-071
K-7
CURVED WASHER (D27*D21*0.3T)
1
53079-020
D-5
ELECTRIC CABLE (1200L)
1
53079-072
K-8
ROUND MAGNET
1
53079-021
D-6
LOWER COMPUTER CABLE (1800L)
1
53079-073
K-9
LEFT CRANK (165LX9/16"-20BC)
1
53079-022
D-7
BATTERY CONNECTING CABLE (650L)
1
53079-074
K-10
ANTI-LOOSE NUT (M10*1.25*10T)
2
53079-023
D-8
SENSOR CABLE (450L)
1
53079-075
K-11
SCREW COVER (D26*11L)
2
53079-024
D-9
CONTROLLER (AE0009-V1.0)
1
53079-076
K-12
RIGHT CRANK (165LX9/16"-20BC)
1
53079-025
D-10
BOLT (M5X0.8X12L)
3
53079-077
L
IDLE WHEEL SET
1
53079-026
D-11
BATTERY
1
53079-078
L-1
FIXING PLATE FOR IDLE WHEEL SET
1
53079-027
D-12
FIXING PLATE FOR BATTERY (97*37.4*1.5T)
1
53079-079
L-2
FLAT WASHER (D24*D16*1.5T)
1
53079-028
D-13
SCREW (ST4*1.41*12L)
2
53079-080
L-3
BEARING (#99502)
2
53079-029
D-14
SENSOR (300L)
1
53079-081
L-4
CURVED WASHER (D21XD16.2X0.3T)
1
53079-030
E
FRONT STABILIZER SET
1
53079-082
L-5
C-RING (S-16(1T))
1
53079-031
E-1
FRONT STABILIZER
1
53079-083
L-6
ALLEN BOLT (M8*1.25*50L)
1
53079-032
E-2
RIGHT TRIANGLE CAP (95.7*57.2*51.3)
1
53079-084
L-7
NUT (M8*1.25*6T)
2
53079-033
E-3
LEFT TRIANGLE CAP (95.7*57.2*51.3)
1
53079-085
L-8
FIXED NUT (D15*13L)
1
53079-034
E-4
ADJUSTABLE WHEEL (D59*M10*40L)
2
53079-086
L-9
SPRING (D3*D19*67L)
1
53079-035
E-5
ANTI-LOOSE NUT (M8*1.25*8T)
2
53079-087
L-10
PLASTIC COVER (D3*30L)
1
53079-036
E-6
BUSHING (D16*D8.1*20)
4
53079-088
L-11
ANTI-LOOSE NUT (M8*1.25*8T)
1
53079-037
E-7
ALLEN BOLT (M8*1.25*60L)
2
53079-089
L-12
FLAT WASHER (D28*D8.5*3T)
1
53079-038
E-8
ROUND WHEEL (D70.2*31)
2
53079-090
L-13
PLASTIC FLAT WASHER (D10*D24*0.4T)
1
53079-039
E-9
SCREW (ST4*1.41*15L)
4
53079-091
L-14
PLASTIC FLAT WASHER (D50*D10*1.0T)
1
53079-040
F
REAR STABILIZER SET
1
53079-092
M
MAGNET SYSTEM SET
1
53079-041
F-1
REAR STABLIZER (95.4*50.6*2.0TX500L)
1
53079-093
M-1
SELF-GENERATING ELECTRIC SYSTEM (D242.7*84.5)
1
53079-042
F-2
RIGHT TRIANGLE CAP (95.7*57.2*51.3)
1
53079-094
M-2
SCREW (M6*1.0*15L)
5
53079-043
F-3
LEFT TRIANGLE CAP (95.7*57.2*51.3)
1
53079-095
M-3
SPRING WASHER (D10.5*D6.1*1.3T)
4
53079-044
F-4
ADJUSTABLE WHEEL (D59*M10*40L)
2
53079-096
M-4
FLAT WASHER (D13*D6.5*1.0T)
5
53079-045
F-5
SCREW (ST4*1.41*15L)
4
53079-097
M-5
OUTER CONNECTING CABLE (350L)
1
53079-046
G
SEAT SET
1
53079-098
M-6
OUTER CONNECTING CABLE(II) (400L)
1
53079-047
G-1
SEAT (LS-A28)
1
53079-099
M-7
FIXING PLATE (20*27*4T)
1
53079-048
G-2
SEAT ADJUSTABLE TUBE SET
1
53079-100
N
53079-049
G-3
FLAT WASHER (D25XD8.5X2T)
1
53079-101
53079-050
G-4
KNOB (D60X32L(M8X1.25))
1
53079-051
H
SEAT TUBE SET
1
53079-052
H-1
SEAT SUPPORTING TUBE SET
1
22
SCREW BAG SET
1
N-1
ALLEN BOLT (M8X1.25X20L)
12
53079-102
N-2
SPRING WASHER (D15.4 XD8.2X2T)
16
53079-103
N-3
FLAT WASHER (D16*D8.5*1.2T)
16
53079-104
N-4
ALLEN BOLT (M8*1.25*50L)
4
www.yorkfitness.com
YORK REF.
REF.
DESCRIPTION
53079-105
N-5
BOLT (M5X0.8X15L)
QTY.
2
53079-106
N-6
ALLEN SPANNER (M6)
1
53079-107
N-7
SPANNER (155*30*5T)
1
53079-108
O
UPPER PROTECTIVE COVER (137.1*121*73.4)
1
53079-109
P
PROTECTIVE COVER (100*81*40.8)
1
53079-110
Q
ADAPTOR (OUTPUT:9V,3A)
1
53079-111
R
WATER BOTTLE BRACKET (120*87*3T)
1
www.yorkfitness.com
23
www.yorkfitness.com
Download PDF