Unitech MS910 Quick Start Guide

MS910

Quick Start Guide

SETUP AND INSTALLATION

The following steps will walk you through the installation process.

Step 1: Connect and CHarge

The Unitech MS910 Pocket Scanner

Installation Instructions & Popular Configuration Settings

Step 2:

Enable Pairing on MS910

Enable Simple Pairing

Scan here to begin Simple Pairing.

Step 6: Pincode Start

Step 3: Enable Bluetooth on host

Go to your device (phone/tablet/computer) settings and turn on the Bluetooth function.

The MS910 will appear on your device as

“Wireless Scanner” or simply “Wireless”

Select/Press “Wireless Scanner”

If you have Bluetooth 2.1, “Wireless Scanner” will now appear as paired. Your device is now paired with the MS910

*If your device does not pair automatically continue to step 4*

Step 7:

Flip the rubber cover up to expose the mini USB port on the scanner. Insert the mini USB cable into the port on the scanner and into the port on the host computer. Charge for at least 5 hours.

Step 4: HID Mode

Bluetooth Mode: HID

Scan here to continue the pairing process between your host device and the MS910.

Numeric Barcodes

Step 5: Finish Pairing

The MS910 will appear on your device as

“Wireless Scanner” or simply “Wireless”

Select/Press “Wireless Scanner”

Your device is now paired with the MS910.

*If prompted to enter a pincode to finish the pairing process, proceed to steps 6-9*

Finish Pairing

Pincode Start

Scan here to indicate the beginning of the pincode sequence.

Scan the pincode sequence provided by your device using these barcodes.

Enter

Scan here to indicate the end of the pincode sequence.

MS910

Quick Start Guide

Step 9: Pincode Stop Test & Finish

Open a word processing program such as Microsoft Word or

Notepad on your host. Now scan the following barcode:

Pincode Stop

Scan here to submit the pincode sequence. Your host device is now paired with the MS910.

How can we help you?

The MS910 should be recognized as a generic HID device by your host device, similar to a standard keyboard. This allows you to scan into any field that you could normally type into.

Unitech’s professional support team is available to quickly answer questions or technical-related issues. Should equipment issues occur, please contact a Unitech Service Representative at (800) 861-8648 for more information.

If the word “Unitech” appears on the screen you have succesfully installed your scanner. Congratulations!

Good Read / Bad Read

SETTINGS AND CONFIGURATION

The following section covers the most common configuration settings for your MS910 scanner.

For additional configuration options please visit

unitechscanners.com/MS910 and select the

“Download” tab. You will find the User’s Manual and a variety of other resources.

KeyBoard TOggle

You can bring up the keyboard on Apple iPhones using the MS910.

Simply double tap the scan button on your MS910.

Double tap the scan button once again to hide the keyboard.