Leader Light s.r.o.
M.Gorkeho 33
SK-052 01 Spisska Nova Ves
Slovakia
www.leaderlight.eu
01
03 Installation
03.1 Unpacking
WARNING!!!
Carefully read before installing, powering or servicing.
Nothing to do if anything misunderstand! Installation can be done only
by a qualified professional in accordance with relevant local codes.
USER MANUAL
LL ARC MINI LINE WHITE
LL40 205 LL40 215 LL40 225
COMPLIMENTS ON YOUR PURCHASE!
Safety Information
- Unpack carefully.
- This is electronic equipment and should be handled carefully.
- Damaged delivered package or if are any mechanical parts broken – it must be claim
immediately by the transport company. Photo pictures as evidence are valuable or
future claim.
03.2 Physical installation
01.1 Risk of eyes damage
- Do not look directly into LED lamps.
- Do not look into light beam from a distance of less than 40 cm (16 inches)!
- Loading capacity of bearing area has to be at least 10 times the weight of all device
clusters (luminaries, clamps, cables, ...).
- Hairbreadth from combustible materials is 0,5m.
All dimensions are in milimeters
01.2 Protection from electric shock
1200
600
38
Φ
300
- Shut down power before installation or maintenance.
- Luminaries, Driver and recommended power supply must be installed by a qualified
professional in accordance with relevant local codes. Only acceptable source of power and
frequency that complies with local building and electrical codes to use.
- Do not use or do not connect the products if the power cable, power plug or fixtures are any
way damaged, wet, or if they are overheating.
- Do not modify, alter, or attempt to service the LeaderLight appliance. Doing so will void the
warranty.
- Before removing or installing any cover or part of appliance disconnect from power.
Operation only with DC 24V source! By using a high voltage AC power supply-danger
of electric shock!
Following items are included:
- LL ARC MINI LINE with 5m cable and 6pin LINE connector
1 pc.
- LL BRACKET MINI LINE FIX
1 pc.
- User manual
1 pc.
Additional items needed:
- LL ARC DRIVER
- DC power supply 24V
- Controller compatible with DMX
- Mounting accessories (adjustable bracket)
- Screws and washers M6
Content:
01 SAFETY INFORMATION
01.1 Risk of eyes damage
01.2 Protection from electric shock
01.3 Fire prevention
02 Product Specification
02.1 Technical Specification
03 Installation
03.1 Unpacking
03.2 Physical installation
03.3 Electrical installation
03.3.1 Connecting to AC/DC power supply
03.3.2 Connecting to LL ARC DRIVER for intensity/colour control
04 Maintenance
Environment
- To tackle all Safety Information- 01!
- You can suffer a dangerous electric shock by using a high voltage AC/DC
power supply - by touching the AC/DC power supply wires inside LL ARC MINI LINE!
- LL ARC MINI LINE can be operated in two ways:
- 03.3.1 LL ARC MINI LINE connecting to DC POWER SUPPLY - for switch ON/OFF
luminaries
- 03.3.2 LL ARC MINI LINE connecting to LL ARC DRIVER - for intensity and colour
control
03.3.1 Connecting to DC power supply (Figure Nr. 1.1)
- LL ARC MINI LINE must be connected to the device- MW power supply
IN:100-260AC/ OUT: 24V.
- It is not necessary to open fixture before connecting to MW power supply.
01.3 Fire prevention
-
03.3 Electrical installation
Follow all safety consideration.
Thermostatic switches or fuses never to bypass.
Device never shield – minimum distance around fitting must be 50mm (2 in.).
LEDs never direct cover with filters or other materials.
Allowing max. ambient temperature is 40°C (104°F).
02 Product Specification
02.1 Technical Specification
AC Power Supply Cord plug connections to MW Power supply:
Symbol
Pin
Wire Colour
Screw (US)
L
live
brown
yellow or brass
N
neutral
blue
silver
ground (earth)
yellow/green
green
03.3.2 Connecting to LL LED DRIVER (Figure Nr. 1.2)
Lamp type: 1200mm: 96xW TOP LED (White)
600mm: 48xW TOP LED (White)
300mm: 24xW TOP LED (White)
- For intensity and colour control is necessary connection with LL ARC DRIVER.
- It is not necessary to open fixture before connecting to LL ARC DRIVER.
- Before installing of LL ARC DRIVER carefully read USER MANUAL for LL ARC DRIVER.
Lifetime: Long 100 000 hrs 60% degradation
View Angle: 120°
Control data Input: 1 channel 24V dimming
Power input: 1200mm: max. 8W
600mm: max. 4W
300mm: max. 2W
Power connection: 24V DC 5m cable with 6pin LINE connector
Net weight: 1200/600/300mm: 1kg/ 0,6kg/ 0,3kg
Dimensions LxΦ: 1200/600/300mm x 38mm without bracket
IP: IP20
Ambient temp. (Ta): Maximum 40°C
Cooling: Conventional
Do not throw away the appliance with the normal household waste at the end of its life,
but hand it in at an official collection point for recycling. By doing this, you help to preserve
the environment.
©MMX - Leader Light – All right reserved
Materials and finish: End cups: plastic
Cover: frosted PMMA
Installation: Any position for ceiling, wall and surface-mounting
Edition: A - 2010
If you have any question please, contact support@leaderlight.sk
Order code
Product name
IC (A)
LL40 205
LL ARC MINI LINE White 300
1x0,08A
LL40 215
LL ARC MINI LINE White 600
3x0,16A
LL40 225
LL ARC MINI LINE White 1200
3x0,32A
LL ARC MINI LINE connecting to DIN POWER SUPPLY enables to switch ON/OFF luminaries.
Accessories:
LL41 170
LL BRACKET ARC MINI LINE 300 ADJUSTABLE
LL41 171
LL BRACKET ARC MINI LINE 600/1200 ADJUSTABLE
LL41 150
LL BRACKET ARC MINI LINE FIX
DC 24V
DIN
POWER
SUPPLY
MW 240
DIN 24V
max. 10A
100-260V AC
1.1
MOUNTING ACCESSORIES
LL ARC MINI LINE connecting to PWM DRIVER and DIN POWER SUPPLY enables to switch ON/OFF luminaries and in addition intensity and colour control by DMX controller.
DMX
CONTR.
FIX BRACKET
- standard delivery with luminary
End cup
- standard delivery with luminary
MINI LINE W
connect max. 1,4A per GROUP
AIMING POSSIBILITY
MINI LINE W
The fixture could be aim to wish
position with adjustable bracket.
DC 24V
max. 10A!
180°
max. 16A
MINI LINE W
DIN POWER
SUPPLY
MW 240
DIN 24V
100-260V AC
white
black
White
R+ R- G+ G- B+ B-
Adjustable bracket
1.2
04 MAINTENANCE
- To tackle all Safety Information- 01!
- Damage caused by inadequate cleaning or maintenance is not covered by warranty.
- Regular cleaning is demand (dust, dirt, ...).
Maintenance policy:
- Unplug mains before maintenance and at least 10 minutes cool off
- Appliance do not illegal open or demount
- Clean-up dust only from outer surface (for ex. diffuser).
- Use vacuum or dumpy duster (warm water)
- Before reinstalling to check failure-free state – no wet parts!
If you have any question please, contact support@leaderlight.sk
Download PDF