F23P – 3U CompactPCI® PlusIO Intel® Core™ i7 CPU Board

F23P – 3U CompactPCI® PlusIO Intel® Core™ i7 CPU Board
Embedded Solutions
for Transportation and Industrial Markets
www.men.de/products/02F023P.html
F23P – 3U CompactPCI® PlusIO Intel® Core™
i7 CPU Board
n Intel® Core™ i7, 4th generation
n Quad-core 64-bit processor
n For CompactPCI® 2.0 systems or CompactPCI®
PlusIO 2.30 hybrid systems (2.0 and CPCI-S.0)
n Up to 16 GB DDR3 DRAM soldered, ECC
n microSD™ card and mSATA slots
n Front I/O: VGA, 2 Gbit Ethernet, 2 USB
n Rear I/O: 4 PCIe®, 4 USB, 4 SATA, 1 Gbit
Ethernet
n Other I/O (onboard, side card): SATA, HDMI/
Display Port, HD audio, USB, UART etc.
n 2.4 to 3.4 GHz Turbo Boost, Hyper-Threading,
Active Management Technology
n Open CL support
The F23P versatile 3U 4HP single-board computer is a
member of the scalable family of Intel® CPU boards
which ensures future-safety and long-term availability
of a system.
The F23P can be equipped with the whole range of
Intel®'s fourth generation Core i7, Core i5, Core i3 and
Celeron® processors offering up to 3.4 GHz maximum
turbo frequency and the latest quad core processor
architecture from Intel® with full 64-bit support, Turbo
Boost, Hyper-Threading, Active Management
Technology and Virtualization Technology.
An excellent graphics performance, thermal supervision
of the processor and a watchdog for the operating
system top off the functionality of the F23P.
A Trusted Platform Module is assembled for platform
integrity.
The F23P comes with a tailored passive heat sink. The
robust design of the F23P - all components including
the DDR3 DRAM are soldered - makes the board
especially suited for use in rugged environments with
regard to shock and vibration according to applicable
DIN, EN or IEC industry standards. The F23P is also
F23P Data Sheet / 2014-12-01
ready for coating for use in humid and dusty environments. Using a
special frame, the F23P can quickly be adapted to conduction-cooled
systems.
The F23P supports the CompactPCI® PlusIO (PICMG 2.30) specification,
meaning it can be used in a hybrid system for control of both
CompactPCI® and CompactPCI® Serial peripheral boards. Compliant to
the standard, 4 USB 2.0, 4 PCI Express® x1, 4 SATA 6 Gb/s interfaces as
well as one Gigabit Ethernet are accessible on the J2 rear I/O connector.
The standard I/O available at the front panel of F23P includes VGA, two
Gigabit Ethernet and two USB 2.0 ports. The F23P can be extended by
different side cards. Additional functions include a variety of different
UARTs or another four USBs, SATA for hard disk connection and HD
audio.
The F23P operates in Windows® and Linux environments as well as
under real-time operating systems that support Intel®'s multi-core
architecture. The InsydeH2O™ EFI BIOS was specially designed for
embedded system applications.
The F23P is the perfect choice for all applications in harsh environments
where high computing and graphics performance is needed.
Page 1
Embedded Solutions
for Transportation and Industrial Markets
www.men.de/products/02F023P.html
Diagram
PCIe
ECC DDR3
SDRAM
Intel® Core™ i7
4th Generation
F
PCIe/PCI bridge
PCIe
Gb Ethernet
DisplayPort/HDMI
Gb Ethernet
DisplayPort/HDMI
F
F
HD Audio
VGA
PHY
Side
Card
J3/P3
USB 2.0
Gb Ethernet
SATA (A/B switchable)
Rear
I/O
J1/J2
PCIe x1
USB 2.0
F
USB 2.0
F
QM87
Platform
Controller Hub
B
PCIe x1
USB 2.0
microSD B
mSATA
USB 2.0
SATA
SGPIO
R
B
F Front
F23P Data Sheet / 2014-12-01
SATA (6 Gb)
R Rear
B Onboard SA SA-Adapter™
Options
Page 2
Embedded Solutions
for Transportation and Industrial Markets
www.men.de/products/02F023P.html
Technical Data
CPU
n
n
The following CPU types are available:
®
o Intel Core™ i7
®
o Intel Core™ i5
®
o Intel Core™ i3
®
®
o Intel Celeron
See overview of supported processor types for processor options and a feature matrix of the Intel® Core™
series.
Chipset
n
QM87 Platform Controller Hub (PCH)
Memory
n
System Memory
o Soldered DDR3, ECC support
o 4 GB, 8 GB, or 16 GB
Boot Flash
o 16 MB
n
Mass Storage
n
The following mass storage devices can be assembled:
o microSD™ card
o mSATA disk
Graphics
n
Integrated in QM87 chipset
Maximum resolution: 1920x2000 pixels
24-bit color at 60 Hz (reduced blanking)
Simultaneous connection of two monitors
n
n
n
Front Interfaces
n
n
n
n
n
Rear Interfaces
n
n
n
n
n
F23P Data Sheet / 2014-12-01
Video
o One VGA connector
o Additional interfaces are available via a side card
USB
o Two Series A connectors, USB 2.0 (480 Mbit/s)
Ethernet
o Two RJ45 connectors, 1000BASE-T (1 Gbit/s), or
o One RJ45 connector, 1000BASE-T (1 Gbit/s), or
o One 9-pin D-Sub connector, two 100BASE-T (100 Mbit/s), or
o Two M12 connectors on 8 HP, two 1000BASE-T (1000 Mbit/s)
o One front channel can optionally be led to the backplane
o Two link and activity LEDs per channel
Front-panel LED for board status
Reset button
Compatible with PICMG 2.30 CompactPCI® PlusIO
o 1PCI33/4PCIE5/2SATA3/2SATA6/4USB2/1ETH1G, or
o 1PCI33/4PCIE5/2SATA3/2SATA6/4USB2/2ETH1G
SATA
o Four channels, SATA Revision 3.x (6 Gbit/s), RAID level 0/1/5/10 support
USB
o Four channels, USB 2.0 (480 Mbit/s)
Ethernet
o One channel, 1000BASE-T (1 Gbit/s), or
o Two channels, 1000BASE-T (1 Gbit/s)
o One front channel can optionally be led to the backplane
PCI Express®
®
o Four x1 links (500 MB/s per link), PCIe 2.x (5 Gbit/s per lane)
®
o One x4 link (2 GB/s per link), PCIe 2.x (5 Gbit/s per lane)
Page 3
Embedded Solutions
for Transportation and Industrial Markets
www.men.de/products/02F023P.html
Technical Data
Onboard Interfaces
n
n
n
n
n
n
Supervision and Control
n
n
n
n
n
An onboard connector allows a side card to be plugged onto the CPU board to add front panel
connections or mass storage devices. A range of standard side cards is available to implement different
functions.
DisplayPort®/HDMI
o Two channels
HD Audio
o One channel
SATA
o One channel, SATA Revision 2.x (3 Gbit/s), RAID level 0/1/5/10 support
USB
o Four channels, USB 2.0 (480 Mbit/s)
PCI Express®
®
o Three x1 links (500 MB/s per link), PCIe 2.x (5 Gbit/s per lane)
Board controller
Watchdog timer
Temperature measurement
Real-time clock with supercapacitor or battery backup
Intel® Active Management Technology
Backplane Standard
n
CompactPCI® Core Specification PICMG 2.0 R3.0
o System slot
®
o 32-bit/33 or 66-MHz CompactPCI bus
o V(I/O): +3.3V (+5V tolerant)
o The board can be supplied with +5V only, all other voltages are generated on the board. The backplane
connectors are used for power supply only.
Electrical Specifications
n
Supply voltages
o +5 V (-3%/+5%)
o +3.3 V (-3%/+5%)
o +12 V (-10%/+10%)
Mechanical Specifications
n
Dimensions
o 3U, 4 HP, or
o 3U, 8 HP
Weight: 388 g (model 02F023P00)
n
Environmental Specifications
n
Temperature range (operation)
o -40°C to +85°C (model 02F023P00)
o 0°C to +60°C (model 02F023P01)
o Airflow 1.5 m/s
o Depends on system configuration (CPU, hard disk, heat sink...)
Temperature range (storage): -40°C to +85°C
Cooling concept
o Air-cooled
o Conduction-cooled in MEN CCA frame
Relative humidity (operation): max. 95% non-condensing
Relative humidity (storage): max. 95% non-condensing
Altitude: -300 m to +2000 m
Shock: 50 m/s², 30 ms
Vibration (Function): 1 m/s², 5 Hz to 150 Hz
Vibration (Lifetime): 7.9 m/s², 5 Hz to 150 Hz
Reliability
n
MTBF: 549 414 h @ 40°C according to IEC/TR 62380 (RDF2000) (model 02F023P00)
Safety
n
UL 94V-0
n
n
n
n
n
n
n
n
F23P Data Sheet / 2014-12-01
Page 4
Embedded Solutions
for Transportation and Industrial Markets
www.men.de/products/02F023P.html
Technical Data
EMC
n
n
n
n
n
n
Software Support
n
Note that 64-bit hardware technology can be used in an optimal way with 64-bit operating system
support
Windows®
Linux
VxWorks® (on request)
QNX® (on request)
For more information on supported operating system versions and drivers see Downloads.
n
InsydeH2O™ UEFI Framework
n
n
n
n
n
BIOS
F23P Data Sheet / 2014-12-01
EN 55022 (radio disturbance)
IEC 61000-4-2 (ESD)
IEC 61000-4-3 (electromagnetic field immunity)
IEC 61000-4-4 (burst)
IEC 61000-4-5 (surge)
IEC 61000-4-6 (conducted disturbances)
Page 5
Embedded Solutions
for Transportation and Industrial Markets
www.men.de/products/02F023P.html
Configuration & Options
Standard Configurations
Article No.
CPU Type
Clock
Cores/Threads
System RAM
Operating
Temperature
Ethernet
Connector
Width
02F023P00
Celeron 2002E
1.5 GHz
2/2
4 GB
-40..+85°C
RJ45
4HP
02F023P01
Core
i7-4700EQ
2.4 GHz
4/8
16 GB
0..+60°C
RJ45
4HP
02F023P02
Celeron 2002E
1.5 GHz
2/2
4 GB
-40..+85°C
M12
8HP
F23P Data Sheet / 2014-12-01
Page 6
Embedded Solutions
for Transportation and Industrial Markets
www.men.de/products/02F023P.html
Ordering Information
Standard F23P Models
Related Hardware
Memory
Systems & Card Cages
02F023P00
Intel® Celeron® 2002E, 1.5 GHz, 4GB DDR3 DRAM with ECC, RTC battery,
TPM, -40..+85°C screened
02F023P01
Intel® Core™ i7-4700EQ, 2.4 GHz, (turbo boost 3.4GHz), 16 GB DDR3 DRAM with ECC,
RTC battery, TPM, 0..+60°C screened
02F023P02
Intel® Celeron® 2002E, 1.5 GHz, 4GB DDR3 DRAM with ECC, 2 M12 for Gb ETH, RTC
battery, TPM, -40..+85°C screened, conformal coating
02F600-00
2 COM extensions and SATA hard disk slot, for F14 and compatible SBCs, -40..+85°C
screened
02F601-00
1 DVI-D and 1 audio at front, SATA hard disk slot, for F14 and compatible SBCs, 4HP,
0..+60°C
02F603-00
3U CompactPCI® side card with 2 USB and 1 COM extension, SATA hard disk and
CompactFlash® slot, for F14 and compatible SBCs, mounted to the right of the SBC,
0..+60°C
02F604-00
3U CompactPCI® side card with 1 IEEE 1394 FireWire, 1 DVI, 1 HD audio and 1 COM
extension, SATA hard disk slot, for F14 and compatible SBCs, mounted to the right of the
SBC, 0..+60°C
02F606-00
2 Gigabit Ethernet on Lemo railway compliant connectors, 1 COM extension (SA-Adapter
not included), SATA hard disk slot, for F14 and compatible SBCs, conformally
coated, -40...+85°C screened
02F608-00
4 SATA and 2 COM ports, additional SATA hard disk slot on-board, for F14 and
compatible SBCs, mounted to the right of the SBC, 0..+60°C
08CT12-00
CompactPCI® PlusIO rear transition module 3U/80mm, 2 Ethernet, 4 USB, 4 SATA, 4
PCIe® x1, -40°C..+85°C qualified
0751-0046
MicroSD card, 2 GB, -40..+85°C
0751-0051
SSD mSATA, 8 GB, -40..+85°C
0751-0052
MicroSD card, 4 GB, -40..+85°C
0701-0046
CompactPCI® 19" 4U/24HP desktop system for 3U cards, 3-slot 3U CompactPCI®
backplane, system slot right, 1U fan tray with 1 fan, 8 HP space for 1 pluggable PSU
0701-0056
CompactPCI® 19" 4U/84HP rack-mount enclosure for 3U cards (vertical), 4+4-slot 3U
CompactPCI® / CompactPCI® Serial hybrid backplane, prepared for rear I/O, 250W
power supply wide range 90..264VAC on rear, 1U fan tray with 2 fans included, 0..+60°C
MEN delivers turn-key systems completely installed (hardware, operating system, accessories), wired and
tested. Different rack sizes, power supplies and backplanes on request.
For details please contact your local sales representative.
Miscellaneous Accessories
0713-0003
Software: Linux
This product is designed to work under Linux. See below for all available separate software packages.
13MD05-90
F23P Data Sheet / 2014-12-01
CompactPCI® 3U 1-slot backplane for stand-alone operation of F14, F15, F17, F18, F19P,
F21P, F22P, F23P: 32-bit/33-MHz with rear I/O, 3.3V supply, ATX-power, power, JTAG,
IPMB and utility connection, 6x screw connection M3
MDIS5 System (and Device Driver) Package (MEN) for Linux. This software package
includes most standard device drivers available from MEN.
Page 7
Embedded Solutions
for Transportation and Industrial Markets
www.men.de/products/02F023P.html
Ordering Information
Software: Windows®
This product is designed to work under Windows®. See below for all available separate software packages.
10Y000-78
Windows® Embedded Standard 7 BSP for F19P, F21P, F22P, F23P, G20, G22, CB70C,
CB70, XM2, MM2, BC50M, BC50I, BL50W, BL50S, BC70M, BL70S, BL70W, BL70E, DC2,
DC13, F205, F206, F210, F215, F216, G215, P506, P507 and P511
13T005-70
Windows® USB2UART driver (FTDI) for F14, F15, F17, F18, F19P, F21P, F22P, F23P, D9,
A19, A20, XM2 and XM50 / XM51 / F50P / F50C hosts
13T006-70
Windows® HD Audio driver (Realtek) for F14, F15, F17, F18, F19P, F21P, F22P, F23P, D9
and A19
13Y021-70
Windows® ERTC/SMB support package
For operating systems not mentioned here contact MEN sales.
Documentation
Compare Chart 3U CompactPCI® Serial CPU and I/O cards » Download
Compare Chart 3U CompactPCI® / PlusIO CPU cards » Download
Compare Chart 3U CompactPCI® / PlusIO peripheral cards » Download
Compare Chart 3U CompactPCI® / PlusIO extension cards » Download
21APPN014
Application Note: Switching on the AMT function
21APPN015
Application Note: Using Real-Time Operating Systems on MEN CPUs with InsydeH2O™
UEFI BIOS
21APPN016
Application Note: Accessing SMBus under Linux Kernel 3.2 on MEN Intel® Boards
Contact Information
Germany
France
USA
MEN Mikro Elektronik GmbH
Neuwieder Straße 3-7
90411 Nuremberg
Phone +49-911-99 33 5-0
Fax +49-911-99 33 5-901
MEN Mikro Elektronik SAS
18, rue René Cassin
ZA de la Châtelaine
74240 Gaillard
Phone +33 (0) 450-955-312
Fax +33 (0) 450-955-211
MEN Micro Inc.
860 Penllyn Blue Bell Pike
Blue Bell, PA 19422
Phone (215) 542-9575
Fax (215) 542-9577
[email protected]
www.men.de
[email protected]
www.men-france.fr
[email protected]
www.menmicro.com
The date of issue stated in this data sheet refers to the Technical Data only. Changes in ordering information given herein do not affect the date of issue. All brand or product names are
trademarks or registered trademarks of their respective holders.
MEN is not responsible for the results of any actions taken on the basis of information in the publication, nor for any error in or omission from the publication.
MEN expressly disclaims all and any liability and responsibility to any person, whether a reader of the publication or not, in respect of anything, and of the consequences of anything,
done or omitted to be done by any such person in reliance, whether wholly or partially, on the whole or any part of the contents of the publication.
The correct function of MEN products in mission-critical and life-critical applications is limited to the environmental specification given for each product in the technical user manual.The
correct function of MEN products under extended environmental conditions is limited to the individual requirement specification and subsequent validation documents for each product
for the applicable use case and has to be agreed upon in writing by MEN and the customer.Should the customer purchase or use MEN products for any unintended or unauthorized
application, the customer shall indemnify and hold MEN and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses,
and reasonable attorney fees arising out of, directly or indirectly, any claim or personal injury or death associated with such unintended or unauthorized use, even if such claim alleges
that MEN was negligent regarding the design or manufacture of the part.
In no case is MEN liable for the correct function of the technical installation where MEN products are a part of.
Copyright © 2015 MEN Mikro Elektronik GmbH. All rights reserved.
F23P Data Sheet / 2014-12-01
Page 8
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement