Memo
Type of product
P URE PRO
DRINKING WATER SYSTEM
M500
Date of purchase
Name
Tel
Address
REVERSE OSMOSIS SYSTEM
REVERSE OSMOSIS SYSTEM
M500
USER'S MANUAL
PURE-PRO
15
01
Introduction of M500
02
What is reverse osmosis
03
Components & Selected filters
04
Cartridge filters
05
The parts of M500
06
Tubing connection diagram
07
Installation diagram
08
Change filters
09
Change membrane
10
Operation regulation
12
FAQ
14
Maintenance checking list
15
Memo
Thank you very much for selecting Pure-Pro Water Corp.
In order to bring the best use of your system, please read
the user's manual carefully before installation and follow
M500 In-Line Filter RO Systems
P URE PRO
DRINKING WATER SYSTEM
the regulations.
Maintenance checking list
Introduction of M500
¨ M500-In-Line Filter RO systems
PURE-PRO
01
Filters
1st stage 2nd stage 3rd stage
4th stage
Other items
Date
REVERSE OSMOSIS SYSTEM
The newly designed M series M500 is user friendly with design simplicity in mind.
It requires no tools for filter changes. Use in-line cartridge filter design makes
filter changes fast, clean and easy. This space saving allows maximum use of
your under counter space.
¨ Specifications
Production: 50 GPD / 189 LPD
14
Water storage tank: 3.2gallons / 12.2 liters
With a booster pump (optional):
Input in AC 110Volt, 220Volt or 240Volt (50 / 60Hz)
Operation pressure: 10 - 80 psi
Dimensions: (cm) 20 (L) x 28 (H) x 31.5 (W)
(cm) 28 (L) x 35 (H) x 28 (W) - tank
Weight: 6 kg - system
4 kg - tank
M500 In-Line Filter RO Systems
M500 In-Line Filter RO Systems
P URE PRO
P URE PRO
DRINKING WATER SYSTEM
5th stage
PURE-PRO
REVERSE OSMOSIS SYSTEM
PurePro M500 reverse osmosis system uses the most advanced water treatment
technology available. Reverse Osmosis is recognized as one of the best
available technologies for producing high quality drinking water. It's also the
same method used by many bottled water companies to make safe and great
tasting drinking water.
DRINKING WATER SYSTEM
What is reverse osmosis
Q: How will the Pure-Pro series water affect mixed beverages?
Because reverse osmosis removes invisible contaminants that mask flavor, it
allows the natural taste of your beverages to come through. You will be able to
use less coffee and still get the full flavor. Concentrated beverages like orange
juice will taste tangier. You will probably be drinking a lot more water as well,
since many people drink soda, Kool-Aid, concentrated juices, and beer as an
alternative to bad-tasting tap water. Also, Pure-Pro eliminates most of the lime
build up on drip coffee makers, preventing the need for frequent cleaning. No
longer will you find the white scum on the inside of pans after boiling water.
Reverse osmosis was originally designed to make sea water drinkable for the
navy. It is ideal for anyone on a low sodium diet. An R.O. membrane has a pore
size much smaller than bacteria virus, or the cryptosporidium parasite. When
functioning properly it will remove all microorganisms from tap water and produce
sterile water. Reverse osmosis is the reversal of the natural flow of osmosis. In a
water purification system, the goal is not to dilute the salt solution, but to
osmotic flow is reversed, water from the salt solution is forced to pass through the
membrane in the opposite direction by application of pressure-thus the term
Q: How much water does the Pure-Pro system produce ?
Under ideal conditions, the RE1812-70 TFC membrane is rated at 70gallons of
production per day (70gpd at 60psi, 95gpd at 100psi). Under the average
conditions, the consumer can expect 70-95 gallons of product water per day. But
that's still a lot of water for the average household's drinking and cooking
requirements.
REVERSE OSMOSIS. Through this process, we are able to produce pure water
by screening out the salts and other contaminants.
PURE-PRO
13
REVERSE OSMOSIS SYSTEM
separate the pure water from the salt and other contaminants. When the natural
02
Q: Don't people need minerals removed from the water ?
Most of the minerals that we receive are from the foods we eat. Only a very
small percentage comes from the water we drink.
Reverse Osmosis
Pressure
Membrane
Q: What is the maintenance schedule for the Pure-Pro System ?
The three pre-filter cartridges should be changed every 6 months. The 5 micron
sediment cartridge filter is the first one; the second is a carbon cartridge filter,
and the third one is a 1 micron sediment filters. (some systems comes with the
Extruded carbon filter.) Failure to change the cartridge every 6 months may
cause chlorine to destroy the membrane.
Water flow
M500 In-Line Filter RO Systems
M500 In-Line Filter RO Systems
P URE PRO
P URE PRO
DRINKING WATER SYSTEM
DRINKING WATER SYSTEM
PURE-PRO
REVERSE OSMOSIS SYSTEM
FAQ
Components & Selected filters
Standard faucet
3.2G water storage tank
Tank ball shut-off valve
Deliver-valve
Water supply connector
Drain saddle
PURE-PRO
03
Color tubing
¨Selected filters
Q: Can the Pure-Pro system be connected to an extra faucet?
It only takes a 1/4" tee and tubing to run the water to a refrigerator or a extra
faucet. Some families run Pure-Pro system to all of their bathrooms.
T.D.S
Mineral
Mineral cartridge filter
TDS meter
Infra-Red
Infra-red cartridge filter
Upgraded european
ceramic faucet
UVC-LIGHTING
ULTRAVIOLET WATER STERILIZER
Q: What factors affect the quantity and the quality of the water production?
There are four major variables to consider:
1.Pressure-The greater the water pressure, the better water quantity and
quality it produced. Water pressure of 60 PSI is ideal.
0
0
2.Temperature-76 F is the ideal water temperature for R.O. 40 F water will
0
cause the production of R.O. water to fall to half of that at 76 F. The maximum
0
water temperature recommended is 85 F.
3. Total Dissolved Solids (TDS) -The higher the amount of dissolved
contaminants in the water, the lower the quantity of water produced. A high
level of TOTAL DISSOLVED SOLIDS can be overcome with additional water
pressure.
4. Membrane -Different membranes have different characteristics. Some
produce more water than others; some have better contaminant rejection
capabilities; some have greater resistance to chemical abrasion for longer life.
Pure-Pro system includes RE1812-70 The Thin Film Composite (TFC)
membranes combine the best of these characteristics and are considered the
finest membrane in the world.
Q: What does the Pure-Pro series drinking water taste like?
The taste of the Pure-Pro water depends on the amount of contaminants in the
tap water originally. If 95% of dissolved minerals and chemicals are removed,
the R.O. water may taste like distilled water (no minerals), bottled water (low
mineral), or natural spring water (moderate mineral content).
UV water sterilizer
M500 In-Line Filter RO Systems
M500 In-Line Filter RO Systems
P URE PRO
P URE PRO
DRINKING WATER SYSTEM
DRINKING WATER SYSTEM
REVERSE OSMOSIS SYSTEM
Q: What is the guarantee on the Pure-Pro system ?
The Pure-Pro System (excluding filters) is guaranteed for 1 year for material
and workmanship. All defective parts will be replaced free within the first year
under natural breakdown. The membrane has one year pro-rated guarantee.
12
PURE-PRO
REVERSE OSMOSIS SYSTEM
¨Components
FAQ
Operation regulation
A.With everything connected, turn on the water check for leaks.
B.Make sure the storage tank shut-off valve is "OFF". Open the sink
top faucet.
C.Within a few minutes (up to 15) the water will start to run from the
Cartridge Filters
Cartridge Filters
Filter Description
Service Life
Stage 1
This 5micron sediment filter is made of 100%
pure polypropylene fibers. High capacity filter
removes dusts, particles and rusts.
6 Months
It takes out 99% of the chlorine and organic
chemicals. It provides enhanced reduction of
taste, odor, and color.
6 Months
It takes out 99% of the chlorine and organic
chemicals. It provides enhanced reduction of
taste, odor, and color.
6 Months
Made in USA. High rejection TFC type membrane
with the capacity of producing 50 gallons per day.
This membrane removes the following hard water
contaminants that may be present in your water:
lead, cooper, barium, chromium, mercury, sodium,
cadmium, fluoride, nitrite, nitrate, and selenium.
4 Years
NSF approved. This post carbon filter is designed
to improve taste. It removes any residual
impurities and odors from the tank and provides a
finer conditioning of pure water.
1 Year
5 Micron
Sediment Filter
faucet slowly.
D.Let the water run for at least 30 minutes. This flushes the carbon
PURE-PRO
11
Stage 2
GAC Filter
the sink top faucet.
F.Tank will now full of water (usually 2 to 3 hours) after the tank has
filled. Open the sink top faucet and drain all water until the storage
tank is empty and there is only a small flow from the sink top
faucet.*** DO NOT USE FIRST TANK OF WATER.***
G.Close the sink top faucet. The system is now ready for use.
Stage3
GAC Filter
H.Change filters regularly every 6 to 12 months and have the
04
membrane checked annually.
Stage 4
TFC Membrane
Caution
0
1.Do not use hot water (over 45 C)!
2.Do not freeze the machine!
3.Switch off electricity and water source if away for more than 5 days,
Stage 5
and drain out pure water.
Post Carbon Filter
M500 In-Line Filter RO Systems
M500 In-Line Filter RO Systems
P URE PRO
P URE PRO
DRINKING WATER SYSTEM
REVERSE OSMOSIS SYSTEM
E.After initial flushing, open the shut-off valve on the tank and close
PURE-PRO
REVERSE OSMOSIS SYSTEM
filters on first time use.
DRINKING WATER SYSTEM
Operation regulation
The parts of M500
1 Turn on water source.
3rd stage
2nd stage
To RO system
Front view
2 Switch on water tank.
Auto shut-off valve
Post carbon filter
10
PURE-PRO
PURE-PRO
05
REVERSE OSMOSIS SYSTEM
REVERSE OSMOSIS SYSTEM
1st stage
RO membrane housing
Back view
3 Let the water run for at least 30
minutes. This flushes the carbon
filters on first time use.
To the faucet
To the tank
To drain out tube
Mini flow restrictor
Input water
Side view
M500 In-Line Filter RO Systems
M500 In-Line Filter RO Systems
P URE PRO
P URE PRO
DRINKING WATER SYSTEM
DRINKING WATER SYSTEM
Change membrane
1 Turn off water source.
2 Switch off water tank.
Tubing connection diagram
CONNECTING THE COLOR TUBING:
A. Connect the WHITE tubing to the water supply connector.
B. Connect the BLUE tubing to the sink top faucet.
C. Connect the BLACK tubing to the drain saddle.
REVERSE OSMOSIS SYSTEM
REVERSE OSMOSIS SYSTEM
D. Connect the RED tubing to the storage tank.
To RO system
4 Remove the membrane housing
cap anticlockwise.
3 Loose the Jaco fitting anticlockwise.
PURE-PRO
06
PURE-PRO
09
Jaco
Faucet
B
C
Tank
6 Install the membrane by carefully
pushing the spigot end into the
socket at the far end of the housing
until completely in.
5 Remove the membrane by a pincer.
O
RE
NG
PR
TE
WA
R
SY
D
Drain
A
O
ST
EM
Input water
M500 In-Line Filter RO Systems
M500 In-Line Filter RO Systems
P URE PRO
P URE PRO
DRINKING WATER SYSTEM
DRINKING WATER SYSTEM
Change filters
Installation diagram
Input water :
1 Turn off water source.
Install water tank :
2 Switch off water tank.
Hand tighten plastic
shut-off valve to tank.
Then connect color
tubing.
To RO system
Deliver valve
To RO system
To water source pipe
Install European ceramic faucet :
Install drain saddle :
Drill a 1/4" hole into
the drain pipe.
3 Loose the Jaco fitting anticlockwise.
Jaco
4 Remove the used filters from clips
and replace with new ones.
PURE-PRO
08
PURE-PRO
07
REVERSE OSMOSIS SYSTEM
REVERSE OSMOSIS SYSTEM
To faucet
Mount drain
saddle aligning
holes.
5 Turn on water source and water
tank, drain out 1 Gallon of water
to purify replacement filters.
Assemble membrane :
1.Remove the membrane housing cap.
2.Replace the membrane.
M500 In-Line Filter RO Systems
M500 In-Line Filter RO Systems
P URE PRO
P URE PRO
DRINKING WATER SYSTEM
DRINKING WATER SYSTEM
Download PDF