ENGLISH
USER'S MANUAL
Thank you for purchasing the HITACHI LCD Television.
Please read this user manual carefully before operating
this product.
To ensure proper operation, please read and follow ALL
the instructions, especially the "IMPORTANT SAFETY
INSTRUCTIONS" and "SAFETY PRECAUTIONS".
Please keep this user manual for future reference.
1
CONTENTS
About This Manual .......................................................3
Mute ........................................................................... 20
Trademark Credits........................................................3
Input Switching to TV/AV1~4, HDMI, and RGB......... 21
About Software .............................................................3
Input Signal Screen Display....................................... 21
SAFETY PRECAUTIONS ................................................4
MENU OPERATION ...................................................... 22
About the Symbols .......................................................4
How to use the On-Screen Display (OSD) system .... 22
Cleaning and Maintenance...........................................7
Language Menu ......................................................... 22
ABOUT LCD PANEL .......................................................8
Setup Menu (TV mode).............................................. 23
Common phenomena of LCD Panel ............................8
Setup Menu (RGB mode) .......................................... 25
Features .......................................................................9
Picture Menu (TV mode)............................................ 26
Supplied Accessories ...................................................9
Picture Menu (RGB mode)......................................... 28
COMPONENT NAMES ..................................................10
Audio Menu ................................................................ 29
Main Unit ....................................................................10
Timer Menu ................................................................ 30
Remote Control ..........................................................11
FUNCTION..................................................................... 31
PREPARATION..............................................................12
About Teletext ............................................................ 31
Remote Control Batteries Installation.........................12
Size Switching............................................................ 32
Caution When Moving the Main Unit..........................12
Audio Switching ......................................................... 34
Safety Precaution on Main Unit Installation ...............13
Power Save Mode...................................................... 35
Anti-Tumble Measures ...............................................13
TROUBLESHOOTING................................................... 36
CONNECTION................................................................14
When Following Messages Appear on the Screen.... 36
Terminal Positions ......................................................14
Symptom and Check List ........................................... 36
Connecting Procedure................................................14
PRODUCT SPECIFICATIONS ...................................... 39
BASIC OPERATION ......................................................19
Signal Input ................................................................ 40
Power On/Off..............................................................19
Recommended Signal List ......................................... 41
Volume Up/Down .......................................................20
IMPORTANT SAFETY INSTRUCTIONS
z Read this instruction thoroughly.
z Retain this instruction for future reference.
z Heed all warnings and cautions to prevent possible danger.
z Follow all instructions. Improper handling could cause personal injury and/or serious damage to the unit that may
shorten its service time.
z Do not block any ventilation openings.
z Install the product in accordance with the manufacture’s instructions.
z Before calling for the technical support or service technician, read “TROUBLESHOOTING” ( 36 ~ 38 ) to determine
the symptoms when problems occur during installation or operation of the product.
z If serious problems happen (such as smoke or an abnormal odor from the unit), turn off the Main Power, unplug the
Power Cord, and then, contact your local dealer immediately.
2
INSTRUCTIONS
product.
This LCD Television has been designed to meet the International standards. However, it could cause personal injuries and
property damage if improperly handled. In order to prevent potential danger and obtain maximum benefit from your set,
please observe the following instructions when installing, operating, and cleaning the product.
Keep this manual for future reference, and record the serial number of your set in the space provided on the front cover
page of this manual.
About This Manual
●
The information in this manual is subject to change without notice.
●
This manual has been created with extra care. In case that you have any comments or questions regarding this
manual, please contact your local dealer or our Customer Service Center.
●
Before operating this set, please fully understand the prerequisite such as specifications or constraints of the
hardware and software. We are not responsible and have no liability for any loss, damage or injury as a result of
misuse.
●
Reproduction, copying, use, modification, and/or transmission in whole or in part of this manual are prohibited
without any prior written permission
●
All other products and company names used in this manual are trademarks or registered trademarks of their
respective owners.
Trademark Credits
●
VGA and XGA are trademarks of International Business Machines Corporation.
●
APPLE and Macintosh are registered trademarks of Apple Computer Inc.
●
VESA is a registered trademark of the Video Electronics Standard Association.
●
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC.
Even if no special notation has been made of company or product trademarks, these trademarks have been fully
respected.
About Software
You may not alter, decompile, disassemble, decrypt, or otherwise reverse- engineer the Software installed in this
product, which are prohibited by law.
3
ENGLISH
Thank you for purchasing the HITACHI LCD Television. We hope that you will enjoy the great performance with this
SAFETY PRECAUTIONS
For your safety, please read the following precautions carefully before using this product. Improper use would cause serious personal injuries and/or
damage to your property or this product.
About the Symbols
The following are the symbols used in this manual and affixed on the unit itself. Please fully understand the meanings of the symbols before reading the
precautions in this section.
WARNING
CAUTION
Never ignore the instruction. There are risks of serious injuries or possible death to the user.
Do not ignore the instruction. There are possibilities of personal injuries and/or property damage.
Other Symbols
The triangle with illustration is intended to alert the users that there are possibilities of fire, burst, or high temperature if the
product is handled improperly.
Each illustration within the triangle specifies the contents in detail. (The figure on the left is an example.)
The circle with diagonal line and illustration is intended to prohibit the users from doing the indicated actions when handle the
product.
Each illustration within this symbol specifies the contents in detail. (The figure on the left is an example.)
The blacked out circle with illustration is intended to constrain the users to follow the indicated actions when handle
the product. Each illustration within this symbol specifies the contents in detail. (The figure on the left is an example.)
WARNING
There is a risk of fire, electric shock, or serious injury.
„ Unplug the power cord immediately when serious problems happen.
Serious problems such as
z Smoke, abnormal odor or sound comes out from the product.
z No picture, no sound or distorted picture on the display.
z Foreign objects (such as water, metals etc) get inside the unit.
Do not continue using the product under these abnormal conditions.
Turn off the Main Power, unplug the Power Cord, and contact your dealer immediately.
Disconnect the
plug from the
power outlet.
For your safety, never try to repair the product by yourself.
„ Do not insert liquids or any foreign objects (such as metals or flammable items) inside the unit.
z In case it happens, turn off the main power, unplug the Power Cord, and contact your dealer immediately.
z Use special caution when younger children are around the unit.
„ Do not remove cover, or modify the product.
z High-voltage components are installed inside of the unit. Removing covers can expose you to high
voltage, electrical shock, and other dangerous conditions.
z Contact your local dealer to perform servicing such as inspection, adjustment, or repair work.
4
Do not
disassemble.
SAFETY PRECAUTIONS (continued)
WARNING
„
Install the unit at a proper area where it does not expose anyone to any danger.
●
„
ENGLISH
There is a risk of fire, electric shock, or serious injury.
If you hit against the edge of the unit, you may be injured.
Do not place any objects on top of the unit.
Objects such as
z Liquid containers (vase, fish tank, flowerpot, cosmetics or liquid medicine).
z If water or any liquid spill onto the unit, it may cause short-circuit and result in fire or electrical shock.
z In case that it happens, turn off the Main Power, unplug the Power Cord, and contact your dealer immediately.
z Do not place anything heavy on top of the unit.
z Do not climb on or hang from the unit.
z Do not let your pets get on top of the unit
„
Do not expose this unit to rain or moisture.
z Never use this unit in the bathroom or shower room.
z Beware when you use this product outside, especially in rainy or snowy weather, and at the beach or
waterfront.
z When the product gets wet, it could cause fire or electrical shock.
„
Unplug this unit during lightning storm.
z To reduce the risk of electrical shock, do not touch the product when starts lightning.
Disconnect the
plug from the
power outlet
„
Do not do anything that may damage the Power Cord.
z Do not damage, modify, twist, forcibly bend, heat, or pull excessively the Power Cord.
z Do not place heavy objects (including the unit itself) on top of the Power Cord.
z If the Power Cord is damaged, contact your dealer for repairs or exchange.
„
Use only with designated power supply voltage.
z To prevent the risk of fire and electrical shock, operate this product only with the power supply voltage indicated on the unit.
„
Beware not to drop or have any impact on the unit.
z Take extra care while moving the unit.
z There is no protection glass on the surface of the LCD panel. Thus, do not press the panel surface with your fingers or
hands. Or do not hit anything against the television. These actions would damage the LCD cells or the panel surface and
could cause the failure or personal injuries.
z In case that you drop the unit or the cabinet is damaged, turn off the Main Power, unplug the Power Cord and contact your
local dealer immediately.
z Continuing use of the product with above conditions would cause fire or electrical shock.
„
Clean dust or metals on or around the blade of the power plug regularly.
z Continuing use of the product with above condition may cause fire or electrical shock.
z Always unplug the Power Cord first, and clean the blade with dry cloth.
„
Do not place the unit on an unstable surface.
Unstable places such as
z Sloped place or shaky rack, table, stand or trolley.
z If the unit falls down, it could cause personal injury.
5
SAFETY PRECAUTIONS (continued)
CAUTION
„ Do not place the unit at the dusty place.
It could cause malfunction.
„ Do not cover or block any ventilation holes on the product.
The television would overheat, and it could cause fire or damage the product which may shorten its service life.
● Install the product in accordance with the instructions in this manual.
● Do not place the unit with ventilation side down.
● Do not install the unit on the carpet or bedclothes.
● Do not cover the television with table cloth etc.
„ Be sure to ground the earth cable correctly.
● Especially when you use Power Cord adapter, be sure to connect the earth cable to the ground terminal. Incorrect
connection would cause fire or electrical shock.
● For your safety, always make sure to unplug the Power Cord before connect or disconnect the earth cable.
Supply connect
the ground wire
„ Follow the Anti-tumble measures in this manual.
● If the television tumble down, there is a risk of personal injury and possible death. Also, it would damage the product
seriously.
„ Do not install this product near the medical devices.
● To prevent malfunction of the medical devices, do not use this product and the medical devices in the same room.
„ Do not place the CRT-based television near the speaker of the LCD Television.
● It could cause the partial discoloration or blurring of the image on the CRT-based television.
● Please install it away from the speaker of the LCD Television.
„ Disconnect all of the external connection cables and detach the anti-tumble measures before moving
the unit.
● It may cause fire, electrical shock, or personal injuries.
„ Connect the power plug securely.
● Improper connection will cause overheat and may result in fire.
● Do not touch the blade of the plug while connecting it to the wall socket. It could cause electrical shock.
● If the plug is not fitted for the wall socket, contact your dearly for replacement.
„ Do not handle the Power Cord with wet hands.
● It could result in electrical shock.
„ Do not pull the cord when you unplug the Power Cord.
● It may damage the cord and could result in fire or electrical shock.
● Hold the plug when disconnecting it.
„ Unplug the Power Cord when unused the product for long periods of time.
„ Handle the batteries properly.
● Improper or incorrect use of the batteries may cause corrosion or battery leakage, which could cause fire, personal injury
or taint damage to the property.
● Use only the types of the batteries which are indicated in this manual.
● Do not install new batteries with used ones.
● Install the batteries correctly by following the polarity (+ and -) indications on the battery compartment.
● Do not depose the used batteries as domestic waste. Dispose them in accordance with the local regulations.
6
SAFETY PRECAUTIONS (continued)
ENGLISH
PRECAUTIONS
„ Do not install the unit in high temperature.
It could damage the cabinet or parts of the product.
● Do not install near any heat sources such as radiator, heat registers, stoves, or other apparatus that produce heat.
● Keep the unit out of direct sunlight. It could increase the temperature of the unit and cause malfunction.
„ Viewing Advice
● The lighting of the environment in which the product is used should be appropriate. Too bright / dark environment is not good
for your eyes.
● Take time to relax your eyes occasionally.
● When you use this product, keep away from the television 3~7 times of the vertical length of the panel. This is the best
viewing distance in order to protect your eyes against eyestrain.
● Adjust the volume in appropriate level, especially during the night.
„ When transporting this product:
● When the product needs to be transported due to moving or repair, use the carton box and buffer material comes with this
product.
● Do not keep this product lying sideways during transportation. It could damage the panel surface or degrade the phosphors
of the panel.
„ Keep away from the television when you use radio.
This television is designed to meet the international EMI standards due to prevent the interference against the radio. However,
the unit may generate noise in the radio.
● If the noise is in the radio, please try the following actions.
● Adjust the direction of the radio antenna in order not to receive the interference radio wave from the unit.
● Keep the radio away from the television.
● Use coaxial cable for the antenna.
„ About the infrared communication devices:
● The infrared communication devices such as cordless microphone or cordless headphone may not be available around the
television. It is because of the communication failure. Please note that this is not malfunction.
„ When you dispose this product at the end of its life, follow the regulations at your residential area.
● For more information, contact the local authority or the dealer where you purchased the product.
Cleaning and Maintenance
Please make sure to unplug the power cord before cleaning the television.
„ How to clean the LCD panel of the television.
● Wipe the panel with a lint-free and dry cloth in order to prevent damage to the panel surface.
● Do not use a chemical cloth or cleaner. Depending on the ingredients, it may cause discoloration and damage the panel surface.
● Do not wipe with a hard cloth or rub hard. It may hurt the panel surface.
● In case of the greasy dirt such as fingerprint, wipe with a lint-free cloth moistened by a diluted neutral detergent solution, and then wipe with a
soft and dry cloth.
● Do not use a spray cleaner. It could cause malfunction.
„ How to clean the cabinet of the television.
● The following may cause crack, deformation, and paint peeling.
● Do
not wipe the cabinet with benzene, thinner, and other chemical products.
not spray volatile solutions such as insecticide over the cabinet.
● Do not leave the cabinet in prolonged contact with plastic or rubber materials.
● Do not use a chemical cloth, cleaner or wax. Depending on the ingredients, it may cause crack and deformation.
● Use a lint-free cloth to clean the cabinet and control panel of the television. In case of the heavy dirt, wipe with a soft cloth moistened by a
diluted neutral detergent solution, and then wipe with a soft and dry cloth.
● Never use the following detergents. It could cause crack, discoloration, and scratch.
● Acid/ alkaline detergent, alcoholic detergent, abrasive cleaner, powder soap, OA cleaner, car wax, glass cleaner, etc.
● Do
7
ABOUT LCD PANEL
Common phenomena of LCD Panel
The following are the common phenomena when operating LCD Panel due to its structural reason.
Please note that they are not malfunctions.
● Defective Spots on Panel
The LCD panel is manufactured with high-precision technology. However, there might be some spots that are not emitted,
brighter than the others, or in different colors, etc.
● Surface on Panel
The LCD panel displays images by blinking the fluorescent lamps internally. This could raise the temperature of the
display surface.
In addition, do not impact strongly on the surface of the panel because LCD panel is made with fine processing glass.
● Residual image
When a still image or menu is displayed on the screen for a short time (about a minute) and then switches to another
image, it may leave an “after-image” on the screen.
The residual image will disappear on its own.
● The Usage under the Low Temperature Environment
Because of the structural characteristics of the LCD panel, the response speed of the LCD panel becomes slower when
the ambient temperature around the television becomes too low. In some cases, it may cause the residual image.
The residual image will disappear on its own as the temperature goes up and back to normal.
8
FEATURES
ENGLISH
Enjoy not only beautiful and high quality pictures on the display, but also various kinds of useful and convenient
functions in your daily life!
• Large-screen and high-definition LCD panel.
• Improved Digital signal processor.
• Accept more digital input devices with HDMI terminals.
• Great diversity of connecting terminals to cover wide range of audio-visual equipments.
• Enjoy the image from PC with large, high-definition LCD screen.
• Easy-to-use On-Screen Display system operating with Remote control.
• Low power consumption with Power Saving feature.
SUPPLIED ACCESSORIES
Check the supplied accessories before installation.
In case of missing or damaged, please contact with dealer immediately.
User Manual
Remote Control
AA size batteries
Power Cord
X2
(BS Type)*
*The type of power plug provided may be different from this drawing for some countries.
9
COMPONENT NAMES
Main Unit
Front Panel
1. Cabinet
1
2. Panel
3. Indicating Lamp
2
4. Remote Control Receiver
5. Speaker
7
6. Desktop Stand
7. Main Power Switch (on the left surface)
3
4
6
5
Rear Panel
1. Side Input
2. Power Cord Socket
3. Terminal Board (External Device Connection)
4. Control Panel (see below for details)
Please refer to 14 ~ 18
32LD900TA
for the detailed information for the connections.
26LD900TA
4
4
3
3
2
1
2
1
Control Panel (including Card Slot)
1. Sub Power button
These buttons are located on the top.
2. Menu button
3. Channel UP/ S button
4. Channel DOWN/ T button
5. Volume UP
6. Volume DOWN
5, 6
7
10
2
3, 4
7. Input button
1
/f button
/ebutton
COMPONENT NAMES (Continued)
ENGLISH
Remote Control
1. Power ON/OFF
2. [Color (Red, Green, Yellow, Blue)]
1
13
2
3. TV Select (TV)
Press this button to change input to TV.
4. Input Select (AV1/AV2/AV3/AV4/HDMI/RGB)
Press this button to change input mode.
3
4
5. Program Select
Press these buttons to select a TV program directly.
6. Freeze [Hold]
Press this button to change the picture to freeze mode.
5
7. MENU
6
7
14
8. Cursor
15
9. Volume Up/Down
16
10. MUTE
8
11. [Index]
17
9
18
10
19
11
20
12
21
22
12. Picture Size
Press this button to change picture size.
13. Recall
Pressing this button shows the input signal status.
14. [TV Text]
Teletext mode can be changed each time pressed in the
following sequence. TV→Teletext→Mix mode
15. Return
You can use this to return to the previous menu.
16. OK
17. Picture Mode
Picture mode can be changed each time pressed in the
following sequence. Dynamic→Natural→ Cinema
18. Channel Up/Down[P +/-]
19. CHI/II
This is exclusively for TV audio I/II mode.
20. [Reveal]
21. [Sub Title]
22. [Cancel]
NOTE
Some buttons are only for Teletext mode, and other buttons have different functions in Teletext mode from
the use of TV mode. Those buttons are indicated by [ ]. Refer to "About Teletext" on 31 .
11
PREPARATION
Remote Control Batteries Installation
This remote control operates on 2 “AA” batteries.
1. Open the battery compartment cover.
● Slide open the battery compartment cover on the backside of the remote
control in the direction of an arrow.
2. Installing the batteries.
● Install 2 “AA” batteries (included) making sure the polarities match the
indication inside the compartment.
3. Close the battery compartment cover.
● To close the battery compartment cover, slide the cover in the direction
of an arrow till it clicks shut.
CAUTION
It could cause corrosion or battery leakage and may result in physical injury and/or property
damage including fire.
● Never mix used and new batteries in the device.
● Replace all the batteries in a device at the same time.
● Remove the batteries if the remote control is not going to be used for an extended period of time.
To avoid possible failure, read the following instructions and handle the remote control
properly.
● Do not drop or have an impact on the remote control.
● Do not spill water or any liquid on the remote control.
● Do not place the remote control on the wet object.
● Do not place the remote control under the direct sunlight or near sources of excessive heat.
Caution When Moving the Main Unit
As this product is heavy, whenever it is moved, two people are required to transport it safely.
When moving the unit, hold it by the top and bottom frame of the LCD screen. (See the figures below for details.)
12
PREPARATION(continued)
Read SAFETY PRECAUTIONS ( 4
to
7 ) carefully besides this page.
The Desktop Stand has been used for the illustration in this manual.
When installing the main unit, be sure to use the specified mount units in order to obtain maximum performance and
maintain the safety.
We assume no responsibility or liability for personal injuries or property damages caused by use of other mount units or
improper installation.
As for the installation instruction, please read each user manual of the mount units: for Desktop Setup, Wall Mounting,
and Ceiling Mounting.
In case of using Wall or Ceiling Mounting unit, by contacting your local dealer, ask the specified installation specialist to
set up. Never attempt to install it by yourself. It could cause injuries or damages
Please leave the adequate space around this
television in order to avoid increasing the internal
temperature.
Make sure not to block any ventilation holes.
Do not install the television in the small space such
as inside the rack, closet or the box.
Leave more than 10cm of clearance from each side
of television and 30cm from the top of television to
wall.
10cm (4 inches) or more*
10cm or
more
30cm
or more
10cm
or more
Clamp
Cord or
chain
Anti-Tumble Measures
Install in a stable place and implement safety measure against overturning.
Securing to a wall or pillar
Using a commercially available cord, chain and clamp, secure the set
to a firm wall or pillar.
Cord or chain
Hook
Wall or Pillar
Chain
Clamp
Securing to ceiling
Using a commercially available cord, chain, and clamp secure the set to a ceiling.
NOTE
● For more information regarding the mounting of the unit, please contact your dealer.
● Please install the unit at a proper area where it does not expose anyone to the danger of hitting themselves (for
example their hands, head or face, etc) against the edge of the unit and cause personal injury.
13
ENGLISH
Safety Precaution on Main Unit Installation
CONNECTION
Terminal Positions
Rear
1. Power Cord Socket
2. Aerial Socket
3. HDMI
4. RGB
5. AV4
6. Monitor Out and Sub Woofer
7. AV1
8. AV3
Side
9. AV2
10. Headphone output
Connecting Procedure
Your television is ready for various kinds of connections. Make a connection in the following steps. Be sure to turn off the
Main Power first when connecting external equipments.
1. Connect Power Cord to the rear panel.
2. Connect Aerial Lead.
3. Connect your external equipments to the television if any.
4. Connect the Power Plug to the Wall Socket.
1. Connect Power Cord to Rear Panel.
Connect Power Cord to the television.
* Make sure not to connect the Power Plug to the Wall Socket
until all connections are completed.
2. Connecting Aerial Lead.
STB
There are two ways to connect Aerial Lead.
When you do not have any other external equipment: STB
Connect the Aerial Lead directly into the Socket at rear panel.
When you have one or more external devices to connect:
1. Use RF cable to connect between each equipment and
Antenna.
2. Connect the Aerial Lead to an equipment ”In” Socket marked
3. Connect the RF cable from the equipment “Out” to the other
equipment “In”.
4. Then, connect from the equipment ”Out” to “ANT” on the
LCD screen Socket on marked .
VCR
[Example: Connecting Antenna through STB and
VCR.
Precautions when connecting the aerial
● Please use a coaxial cable which is free from interference to connect the aerial. Avoid using a parallel flat feeder wire
as interference may occur, causing reception to be unstable and stripe noise to appear on the screen.
● Avoid using indoor aerial as this may be affected by interference. Please use CATV net or outdoor aerial.
● For safety, install an external aerial conforming to AS1417.1 (applicable for Australia only)
● If there are noise appearance in the picture of VHF-Low band channel, please use the double-shielded cable (not
provided) for RF LEADS to reduce the noise.
14
CONNECTION (continued)
Connecting Procedure (continued)
ENGLISH
3. Connecting to External Equipment
● Terminals on Rear
AV1 can be connected to the equipment with an S-Video
output and Composite output.
IN
OUT
(Example)
VCR
DVD player
Set-Top Box
If your external device has a S-video terminal, S-VIDEO connection is recommended for higher quality picture.
AV3 and AV4 can be connected to the equipment with
either Component or Composite output. Depending on
OUT
IN
whether the
Y/VIDEO input of your selected equipment is Y signal or
Video signal, it automatically regards as Component or
Composite. When using as Composite, do not insert the
jacks into PB or PR.
(Example)
VCR
DVD player
Set-Top Box
If your external device has a Component terminal, COMPONENT connection is recommended for higher quality picture.
15
CONNECTION (continued)
Connecting Procedure (continued)
Monitor Out can be used to display same image as
main unit on another television.
When this output terminal is connected to an external
television with a 75 Ohm terminal, the same image from
composite (AV1~4), or S-Video, or RF signal can be
displayed to the external television.
OUT
(Example)
IN
VCR
Sub Woofer terminal can bring the deep bass sound
from the external speaker.
or
IN
(Example)
OUT
PC terminals (D-sub 15 pin + audio) is connected to
PC, which allows Analog RGB signal.
Mini
stereo
plug
16
IN
(Example)
OUT
CONNECTION (continued)
ENGLISH
Connecting Procedure (continued)
HDMI terminals can be connected to the devices with
HDMI output.
(Example)
VCR
IN
OUT
DVD player
Set-Top Box
Information
HDMI(High Definition Multimedia Interface) is next-generation multimedia I/O interface. Only one cable is used to transmit
all video/audio/control signals, which creates easy connection.
Moreover, those digital signals can produce high quality data without any degradation.
If your external device has a HDMI terminal, HDMI connection is recommended for higher quality picture and sound.
● Terminals on Side
Since the following terminals are located on the side, it is very convenient to use the extra device on a temporary
basis after done the connections on the rear panel.
AV2 can be connected to the equipment with an S-Video output and composite output.
(Example)
VCR
IN
OUT
Camcorder
DVD Player
Home video game system
If your external device has a S-video terminal, S-VIDEO connection is recommended for higher quality picture.
17
CONNECTION (continued)
Connecting Procedure (continued)
Headphone The detail settings can be adjusted from Audio Menu on page 29 .
The audio from the speaker will be muted when connecting the headphone to this terminal.
4. Connecting the plug into the wall socket
Connect the Power Cord after completing all other connections.
(The type of plug is different from this drawing for some countries.)
CAUTION
● Use only the Power Cord provided.
● Do not use a power supply voltage other than that indicated (AC100-240V, 50/60Hz). It may cause fire or electric
shock.
● For the LCD panel, a three-core power cord with a ground terminal is used for efficiency protection. Always be sure to
connect the Power Cord to a three-pronged grounded outlet and make sure that the cord is properly grounded. If you
use a power source converter plug, use an outlet with a ground terminal and screw down the ground line.
● Ensure that both ends of power cord are easily accessible.
● If you have to change the power cord, please use the certified power cord that meets your region’s safety standard.
18
BASIC OPERATION
ENGLISH
POWER On/Off
Now, turn On the main power of the unit. Make sure that the Power Cord
has plugged into the wall socket.
Main Power switch (on the left surface)
Indicating Lamp
● To turn On the power of the television:
Sub Power button
1. Press the Main Power switch on the television.
● The Indicating Lamp will illuminates in Red (Standby mode).
2. Press Sub Power button either on the control panel or on the remote
control.
● The color of the Indicating Lamp turns into Green, and the image
will display on the screen.
● To turn Off the power of the television:
1. Press Sub Power button either on the control panel or on the remote
Sub Power button
control.
● The image disappears from the screen and the Indicating Lamp
turns into Red (Standby mode).
2. Press Main Power switch to completely turn Off the power of the unit.
The Indicating Lamp Status Check
Indicating Lamp
Status
Power Status
Off
Off
Red
Standby mode
Green
On
Orange
Power Save mode*
Power Switch Status
Main power →Off
Main power →On
Sub Power button →Off
Main power →On
Sub Power button →On
Main power →On
Sub Power button →On
* About Power Save mode, see [Power Save Mode]and [When Following Messages Appear on the Screen] on 35
and 36 for details.
Note
● If the image does not appear on the screen at all, or have any problem, see TROUBLESHOOTING on 36
~ 38 .
It may help you to solve the problems.
● You can turn ON the power only by pressing the Sub Power button during the Standby mode.
● Do not switch the power On/Off repeatedly in a short period of time. It could cause malfunction.
● To avoid sudden surges of electricity when the power comes back on, turn Off the main power of the unit before you
leave if there is a blackout during use of the unit.
19
BASIC OPERATION (continued)
Volume UP/DOWN
1. To increase the sound volume, press
button on the remote
control, or Volume Up button on the control panel.
● The Volume Indicator value on the screen will shift right.
2. To decrease the sound volume, press
button on the remote
control or Volume Down button on the control panel.
● The Volume Indicator value on the screen will shift left.
Volume Up/Down
button
Mute button
Mute
1. To mute the sound, press
button on the remote control.
● The sound of the unit is temporarily turned Off.
● When the audio mode is set to Mute, mute icon
Volume Down
button
will be
displayed at the left-bottom corner of the TV.
2. To turn the sound back, press
button again, or Volume Up
button on either remote control or the control panel.
NOTE
You can decrease the volume by pressing
muted the volume.
20
button while
Mute
Volume Up
button
BASIC OPERATION (continued)
Input Switching to TV/AV1~4, HDMI, and RGB
ENGLISH
Input Switching to TV/AV1~4, HDMI, and RGB
Input Select
button
By pressing Input Select button, you can switch the input.
● To watch actual broadcast, press Input Select button on the control
panel, the numeric buttons or Channel Up / Down button on the
remote control.
● To display the image outputting from the external equipments
connected to each terminal (AV1~4, HDMI and RGB), select
Channel
UP/DOWN
button
1. Press Input Select buttons on the remote control.
2.The Input modes can be also switched by using Input Select button
on the control panel.
Each time this button is pressed, the screen displays corresponding
Input Select
mode by following order.
TV
RGB
AV1
AV2
HDMI
Channel Down
button
Channel Up
button
AV3
AV4
3. To directly go back to TV mode, pressing channel Up/Down buttons
on either remote control or the control panel.
Also, you can use the numeric buttons on the remote control.
Input Signal Screen Display
The input signal status can be displayed on the screen by pressing the
RECALL button of the remote control.
● The display will go out in approximately 6 seconds.
TV
1
ABCDE
▼
RECALL
button
TV position
Name
Sound mode
VIDEO
AV1
Composite
Input mode
Signal mode
RGB
RGB
H: 48.4 kHz
V: 60.1 Hz
Input Mode
Input horizontal frequency of
Input vertical frequency of RGB
`
21
MENU OPERATION
How to use the On-Screen Display (OSD) system
With the On-Screen Display system, you can access the various kinds of the features and functions in this product.
Picture
• Basic Operation
Audio
Timer
1. Press
button on the remote control or Menu button on the control panel
of the unit. The Main Menu is displayed on the screen as shown on the right.
Setup
Language
Select
2. To select the item, press ▲ or ▼ buttons.
The selected item will be highlighted in Green.
OK Set
<Main Menu>
button to set your selection.
3. Press
The selected menu page will be displayed on the screen.
4. Use ▲ or ▼ buttons to choose the item on the MENU page.
Press
button to set your selection.
5. Use Wor X buttons to adjust the item values or choose options.
Press
button to set your selection.
6. To exit from the menu, press
button.
NOTE
The OSD menu screen will be closed automatically when no operation has been made
for about one minute.
Language Menu
Select the language from the list so that you can display the OSD menu in the selected language.
How to set Language
Language
English
簡體中文
繁體中文
Pycckий
1. Enter the “Language” menu from the Main Menu.
2. Select the appropriate language with ▲ or ▼ button from the list.
The white dot is marked inside of the circle of selected language.
Select
button to set your selection.
3. Press
The white dot is marked inside of the circle when the selection is fixed.
4. Press
22
button to exit from the entire OSD menu.
OK Set
Return
MENU OPERATION (continued)
ENGLISH
Setup Menu (TV mode)
With this menu, you can access various kinds of features relating to TV channel settings.
Setup
Auto Tuning
Manual Tuning
Fine Tuning
Sort
Teletext Language
Select
Selected Items
Return
Setup hint
Position
Mode
Auto Tuning
OK Set
Direct
Select the way to display the channels on the screen.
The position numbers are displayed on the screen.
(1~125)
The channel number 1~57 are displayed as C∗ ∗, and the
channel number 1~42 are displayed as Z∗ ∗.
Tune the local channels automatically.
Search
Press
button to start searching.
Press channel up (+) down (-) buttons to input position number
(1~125) or channel number (C∗ ∗ or Z∗ ∗ ).
Position
When Auto Tuning Mode is set to [position], search the
frequency by using WX buttons.
Frequency
When Auto Tuning Mode is set to [Direct], this function is not
available (grayed out).
1. Move the cursor to the first digit and select the letters
with ▲▼ buttons.
2. Move to the next digit with Xbutton.
Manual Tuning
Name
3. Press
letters.
button again when you finish inputting all the
• The selectable letters are as follows: “0”~”9”, “A”~”Z”, “+”,
“ ” (blank), “-” (displayed as blank), and “.” (period).
Auto
M
Sound System
BG
Select the sound system from 5 different modes.
I
DK
23
MENU OPERATION (continued)
Setup Menu (TV mode) (continued)
Selected Items
Setup hint
Auto
PAL
Color System
SECAM
Select the color system from 5 different modes.
NTSC4.43
Manual Tuning
NTSC3.58
Off
Skip
On
Fine Tuning
-56~+56
It allows you to skip unregistered channels automatically when
you use channel up (+) down (-) buttons to select channels.
Regarding the unavailable channels, this function will be
set to [On] automatically to skip.
X: Increase the frequency data for the main tuner.
W: Decrease the frequency data for the main tuner.
You can change the order of channels as follows.
1. Move the cursor to the Channel row you want to change order
Sort
and then, press
button.
2. The color of the letters on the designated line will be turned
into green bracket and with [ ].
3. Move the designated row by using ▲▼ buttons.
4. Press
button to fix the position.
• This function is not available (grayed out) when the Auto
Tuning Mode is set to [Direct].
Teletext Language
24
Select Teletext Language from 5 different categories (West
Europe, East Europe, Cyrillic, and Arabic) according to
the area.
Example:
West Europe: Asian countries where the Teletext is
broadcasting in English such as Singapore,
Australia, and Malaysia.
East Europe : Poland, Sweden, Hungary
Cyrillic
: Russia
Arabic
: Arab countries
MENU OPERATION (continued)
ENGLISH
Setup Menu (RGB mode)
With this menu, you can adjust the display condition of the image which is inputting from the RGB terminals.
By pressing ▼ button at the bottom of the 1st Setup menu page, the 2nd Setup menu page will appear on the screen.
Setup
Auto Adjustment
Image Position
Horizontal Clock
Clock Phase
Reset
Select
Selected Items
:►
:►
:
:
: Reset
◄►Set
41
34
Return
Setup hint
Adjust Horizontal Position, Vertical Position, Horizontal
Clock, and Clock Phase automatically.
• Press
button to start auto adjustment.
The message “Auto Adjusting” is displayed.
• Depending on the type of the signal, there is a possibility
that the display may not be adjusted in its optimum
condition with this function. In that case, please adjust
Auto Adjustment
Adjust the display position horizontally.
• When the position exceeds the possible range, the
display color will turn into Magenta.
Image Position*
Horizontal Clock*
Clock Phase*
Reset
0~63
0~100
Minimize the vertical stripes on the screen.
Minimize the blurring of the letters and stripes on horizontal
row.
• Make sure to adjust Horizontal Clock first before
adjusting Clock Phase.
Reset image position.
25
MENU OPERATION (continued)
Picture Menu (TV mode)
In this menu, you can make specific adjustments for the picture based on your preference.
By pressing .button at the▼bottom of each menu page, the next Picture menu page will appear on the screen.
Page 1
Page 2
Picture
Picture Mode
Contrast
Brightness
Color
Sharpness
Tint
Color Temperature
Back Light
Reset
Select
: Dynmaic
:
:
:
:
:
: Cool
: Middle
: Reset
OK Set
Selected Items
Dynamic
Cinema
Contrast*
Brightness*
Color*
Sharpness*
Tint*
Color Temperature*
Back Light
26
55
75
11
:
:
:
:
:
On
On
On
Middle
Reset
45
Return
Select
On/Off
Return
Setup hint
Natural
Picture Mode
50
Picture
NR
Film Mode
3D Comb Filter
Black Enhancement
Reset
You can make the better selection from 3 modes
depending on the lighting condition and intended use.
Dynamic : Suitable for the brighter conditions.
Natural : Suitable for the normal lighting condition.
Cinema : Suitable for watching movie.
0~100
This adjusts the contrast to meet the lighting environment by
using WX.
0~100
With this function, black is adjusted to change the overall
brightness by using WX.
0~100
It can adjust color density based on your preference by using
WX.
0~12
0~90
Cool
Warm
User
Normal
Low
Middle
High
Preferred sharpness can be adjusted by pressing W
button for Softer image or X button for Sharper image.
Pressing Wbutton enhances red and weakens green, while
pressing X button weakens red and enhances green.
The setup hint is adjusting for the realistic skin color. This is not
available by PC mode when receiving RGB signal.
You can select from 4 settings (default) depending on the color
condition with WXbuttons.
Adjust the brightness of the Back Light for the maximum
visibility.
MENU OPERATION (continued)
Selected Items
ENGLISH
Picture Menu (TV mode) (continued)
Setup hint
Off
NR
The noise on the screen or interference could be reduced,
especially at the area of weak electric field.
On
Off
On: Automatically identify if it is the movie film and faithfully
reproduces the original film images.
On
Off: Set to Off if the image does not look natural during
turning on.
Film Mode*
Off
3D Comb Filter
On
This is available only when receiving NTSC/PAL
composite signal. This reduces the dot and color blurring
in minute scales so that it can reproduce purer color.
Off
Low
Black Enhancement*
Adjusts the black level compensation.
Middle
High
Reset
Each item on this menu screen can be restored to the original
factory settings by pressing
button.
Information
The items indicated by “ ∗ ” can be stored the setting for each of inputs and picture modes (Dynamic/Natural/Cinema).
You can enjoy different setting depending on the selected input such as VCR in AV1.
In addition, the items indicated by “ ∗ ∗ ” can be stored the setting for each of color temperature modes.
27
MENU OPERATION (continued)
Picture Menu (RGB mode)
In this menu, you can make specific adjustments for the RGB picture based on your preference.
Picture
Contrast
:
Brightness
:
Color Temperature : Cool
Back Light
: High
Reset
: Reset
Select
Selected Items
Contrast
Brightness
Color Temperature
Back Light
OK Set
50
55
Return
Setup hint
0~100
This adjusts the contrast to meet the lighting environment by
using WX.
0~100
With this function, black is adjusted to change the overall
brightness by using WX.
Cool
Normal
Warm
User
Low
Middle
High
You can select from 4 settings (default) depending on the color
condition with WXbuttons.
Adjust the brightness of the Back Light for the maximum
visibility.
Each item on this menu screen can be restored to the
Reset
original factory settings by pressing
button.
Information
There is a useful function to automatically store the setting on menu in almost every item so that you do not have to reset
every time. Furthermore, the following items can be stored more specifically.
28
MENU OPERATION (continued)
ENGLISH
Audio Menu
With this menu, you can adjust and customize the audio condition as you like.
Audio
Matrix Surround
Dynamic Bass
Bass
Treble
Balance
Perfect Volume
Reset
Select
Selected Items
Matrix Surround
:
:
:
:
:
:
:
◄► On/ Off
On
On
50
55
75
On
Reset
Return
Setup hint
Off
On
Off
Dynamic Bass
On
The surround sound is mixed to left and right in order to create
the illusion of virtual surround speakers.
Dynamic Bass gives you the enhanced bass sound. Low
frequency signals can be boosted while the output signal
amplitude is measured.
Bass
-10~+10
Adjust the Bass of the sound.
Treble
-10~+10
Adjust the Treble of the sound.
Balance
-10~+10
Adjust the balance of the sound comes out from right and left
side of the speakers.
Off
Perfect Volume*
On
Reset
It will automatically adjust the volume to its average level each
time you change the channel.
Reset all the set values on this Menu Page to the original factory
settings.
Information
There is a useful function to automatically store the setting on menu in almost every item so that you do not have to reset
every time. Furthermore, the following items can be stored more specifically.
29
MENU OPERATION (continued)
Timer Menu
This allows your television to turn Off (Standby mode) at set time automatically, which you may find useful.
Timer
Off Timer
Select ◄► Adjust
Selected Items
: 30 Min.
Return
Setup hint
Off
30Min.
Off Timer
60Min.
90Min.
120Min.
30
This function automatically sets the power to Standby
mode when the selected time period has elapsed.
FUNCTION
ENGLISH
About Teletext
z What is “Teletext”
Teletext is the written information services provided by each TV channel.
Most TV channels provide information via Teletext such as:
z
TV program schedule
z
Weather forecasts
z
Sports results
z
Newsflash
z How to operate the Teletext
You can display the Teletext simply by pressing the remote control buttons.
NOTE
Select Teletext language from Setup Menu shown on 24
Operation
To switch Teletext mode:
Teletext mode can be changed each time pressed in the following
sequence. TV→Teletext→Mix mode
Press
[TV
To display Index page.
To access Subtitle service directly (if the channel has the Subtitle service
broadcasting).
To display Hidden text.
ex. The answers of the Quiz or the Game page.
Press again to close the revealed answer.
To return to actual broadcast temporarily while searching for the Teletext
page you request.
When the search is done, the designated page # will be displayed on the
upper left of the screen.
Press again to return to Teletext page.
Text]
[Index]
[Subtitle]
?
[Reveal]
X
[Cancel]
To access the link pages which are displayed at the bottom of the page.
(Select the buttons corresponding to the colors of the letters on screen.)
[Color]
To hold the text picture.
[Hold]
+
P
-
To change Teletext page #:
ex. Press P+/P- to increase/decrease page number of Teletext.
[P +/-]
Information
z
Some Teletext pages do not display Link Pages at the bottom of the screen.
Press
button to display them.
31
FUNCTION (continued)
Size Switching
Each time
button of the remote control is pressed, the screen
display size is switched in sequence, and the status will be displayed
at the bottom of the screen.
TV/AV signal input
TV/AV1/AV2/AV3/AV4 /HDMI
4:3
Panoramic
Picture Size
FULL
Cinema
You can display the image at optimum condition by selecting display size depending on the current output image as
shown below.
Current Output
Display Size
To display suitable screen as follows.
Image
(Input Signal)
4:3
(4:3 Signal)
Panoramic
Cinema
(Cinema)
Full
(Squeeze)
Play a 4:3 image on screen faithfully. Blanking occurs on both sides.
Play a 4:3 image which enlarges horizontal and vertical size of the
middle in equal scales, and displays both sides appearing much wider.
Play a 21:9 image in 4:3 image (Cinema size) expanding vertically.
*In some case, slight blanking may remain at the top and bottom.
Play a 4:3 image faithfully in the standard vertical size and horizontally
squeezed.
16
Information
Aspect ratio represents horizontal : vertical ratio on screen.
For example, vista image is 16:9 in 4:3 image.
16(or 21)
9
9
3
4
CAUTION
Using a wide-screen television
z This television has a screen mode selection feature. If an incompatible screen mode is selected to play certain
software, such as a TV program, the image would appear different form the original. Take this into consideration
when making screen mode choices.
z Use of the wide feature displaying enlarged pictures in coffee shops, hotel and other establishments for
commercial or public viewing purposes could infringe on the copyright holder’s right protected by Copyright Law.
z When a normal 4:3 image (not wide screen) is displayed over the entire screen in the Panoramic mode, the
peripheral image may disappear partly and/or appear distorted in some cases. Use 4:3 mode to view the image
reflecting original intention.
32
FUNCTION (continued)
ENGLISH
Size Switching (continued)
RGB signal input
RGB signal input only support Full size
Display Area Selection Diagram
Resolution
Full display
Display
640 X 480 (VGA)
800 X 600 (SVGA)
1024 X 768 (XGA)
33
FUNCTION (continued)
Audio Switching
Sound Multiplex
(TV mode)
You can make optimum use of available audio by pressing
bottom of remote control. Audio can be switched only if
receiving sound multiplex signals; otherwise, pressing this button will have no effect, such as when only mono sound is
received.
These can be divided into two main categories: Bilingual/Dual Sound broadcast and Stereo broadcast.
Bilingual/Dual Sound broadcast
Bilingual broadcast is the broadcast available on the main and sub languages, while dual sound broadcast is available on
the primary and secondary sounds; for example, some sports programs contain broadcast commentary on a game as
primary sound, and a commentary about a team as the secondary.
When bilingual program is received, sound mode display appears in yellow as shown.
Each time
button is pressed, the display is switched in the sequence of following.
Sound multiplex signal
Green
Yellow
Yellow
[II]
[I]
▼
[I]…Main language/Primary Sound
[II]...Sub language/Secondary Sound
▼…force mono: This selects main language or primary sound.
Stereo broadcast
With stereo broadcast, you can enjoy different sound from either side.
When a stereo program is received, sound mode display will appear in red as shown.
Press
button to switch between stereo and mono sound.
Sound multiplex signal
Red
▼
Green
…stereo
▼…Force Mono
NOTE
z
z
Please select ▼ (force mono) in case of poor reception, noise, poor stereo sound due to signal condition so that you
can receive a clear mono sound.
▽represents the Mono broadcast.
34
FUNCTION (continued)
When the RGB input is selected
z
When this unit is connected to a VESA DPMS computer, the Power Save mode (Operation mode : Off) can be set to be
activated automatically when the computer is not being used to reduce power consumption by this unit.
Horizontal
Yes
Vertical
PC signal
Operation mode
Yes
Active (normal display)
On
Indicating lamp
Lights green
RGB sync
signal
No
Yes
Yes
No
Blank (no display)
Off
Lights orange
Returning to operating status
z
Operate the personal computer, or press either the INPUT SELECT button of the control panel or the RGB button of the
remote control.
35
ENGLISH
Power Save Mode
TROUBLESHOOTING
Before calling service technician, check the following tables first. If the problem is not be solved with the suggested procedures, contact your local
dealer. For your safety, NEVER try to repair the product by yourself.
When Following Messages Appear on the Screen
Message
Power Save
No Sync. Signal
Condition / Action
Page
This indicates it is in Power Save mode. (in RGB mode)
The indicating lamp lights in orange.
19 , 35
The unit cannot detect any signals from any input terminals.
z Check if the cable is connected correctly and firmly.
z Check if the power of the external equipments is ON.
z Check if the input selection matches the connection terminal.
z Check if the PC is in Power Save mode or not.
14 ~ 19
The unit receives signals not supported by the television.
Invalid Scan Freq.
z Check if the cable is connected correctly and firmly.
39 , 41
41
z Check if the input signal is compatible with the specification of the television.
Not Available
This shows when the selected operation is not available.
Check Antenna
Check the connection status when this message appears.
14
Auto Adjusting
This indicates that it is in the process of auto adjusting.
(in RGB mode)
15
Symptom and Check List
Symptom
Check list
Page
z Check the Indicating lamp status (Off, Red, Green, or Orange).
z Check the connection of the Power Cord and/or other cables.
No picture – no sound
z Check if the Main Power of the unit or external equipments is ON.
z Check if the TV mode is selected.
z Check if the TV is in “Standby mode” or “Power Save mode”.
14 ~ 18
19 , 23
35
z Adjust the values in “Picture menu” and “Audio menu”.
z Check the antenna connection and direction.
Snowy picture-poor sound
z The TV station may have broadcast difficulties.
14
z Try another channel.
z Check the antenna connection and direction.
Multiple images-normal sound
z Fine tuning the TV.
z Check the connection of the external equipments.
14 , 23
z The TV station may have broadcast difficulties. Try another channel.
Intermittent interference
z Check if the source of interference is shielded well.
z Remove those kinds of electrical devices away from the TV.
z Check the volume level.
Normal picture, but no sound
z Check if the
button has been press or not.
z Make sure that the headphone is NOT connected.
20
z Check the connection of the external equipments.
No picture – normal sound
z Check the volume level of “Brightness” and “Contrast” in “Picture Menu”.
26 , 28
z Check if the batteries are installed correctly.
The remote control does not work.
z The batteries might be exhausted. Replace them with new ones.
z Remove all the obstructions in front of the sensor window on the unit.
11 , 12
z Check if the buttons of the control panel can work.
Normal picture but no
color-normal sound
36
z Check the connection of the external equipments.
z Check the “Color System” in “Picture Menu”.
26
TROUBLESHOOTING(continued)
Symptom
z No picture
The Indicating lamp → Off
ENGLISH
Symptom and Check List (continued)
Page
Check list
z Check if the Power Cord is plugged into the socket firmly.
z Check if the Main Power is ON.
14 , 19
z Check if all the cables of the external equipments are connected
z No picture
The Indicating lamp → Orange
It means that the unit is in “Power Save
mode”.
correctly and firmly.
z Check if the power of the external equipments is ON.
z Check if the TV/AV mode has been selected correctly.
35
z Check if the PC is in Power Save mode or not.
z Refer to “Power Save mode” and “When following messages appears
on the screen”
z No picture
The indicating lamp → Green
z The top of the television and surface of
the panel heat up.
z Image cannot be displayed in the correct
position.
z When the VCR is in special playback
features (Fast forward or Rewind), the
screen gets dark and cannot see the
image at all.
z Check if the signal cable is connected correctly and firmly.
z Adjust the level of Brightness and Contrast lower.
z It may happen when you use the unit for long hours. Turn off the Main
Power of the unit for a while. Please note that this is not malfunction.
z Press
button to check if the input signal of the displayed image is
14 ~ 18
39 , 41
39 , 41
compatible with the specification of the television.
z It could happen when the VCR is connected to Component output,
such as 480i. This is not malfunction.
z Try Composite output or S-video output and check the picture again.
z The display size is fixed at “FULL” when the receiving signals are
z Screen display size cannot be switched
correctly.
1080i/60Hz, 1080i/50Hz, 720p/60Hz, or 720p/50Hz.
z Check the signal status by pressing the
button on the remote
32 , 33
control.
z Check if the cables are connected correctly.
z Cannot be displayed the image from HDM.
z Check the output format of the equipments.
z (Please refer to “Connecting Procedure” and “Recommended Signal
17 ~ 41
List”.)
37
TROUBLESHOOTING(continued)
Symptom and Check List (continued)
Symptom
Page
Check list
z The image on the screen is moving in
an oblique direction.
(PC input mode only)
z Adjust “Horizontal Clock” and “Clock Phase”.
25
z Adjust “Horizontal clock”.
25
z The coarse horizontal stripes could be
seen in full-display mode.
(PC input mode only)
z The part of the image is lacking.
AAAAA
z Try “Auto Adjust”.
25
(PC input mode only)
z Check the Signal status of the PC by pressing
z The horizontal stripes are moving
button
on the remote control.
vertically with flickering screen.
(PC input mode only)
25
z If the Vertical Frequency of the PC is set to less than 70Hz,
adjust its level higher (up to 70Hz).
z When the characters are displayed on the
whole screen, the vertical stripes appear
and some of the characters are blurred.
(PC input mode only).
z Try “Auto Adjust”.
abcdefgABCDEFGabcd
z When the small patterns are
displayed on the screen, the entire
screen is flickering.
(PC input mode only)
z The thickness of the letters, lines, etc
is not displayed evenly.
(PC input mode only)
38
25
adjust “Horizontal Clock”.
z When the letter string is displayed in
full-screen, all of the characters on
the screen are blurred.
(PC input mode only)
z If the display condition is not improved with Auto Adjust,
abcdefgABCDEFGabcd
z Try “Auto Adjust”.
abcdefgABCDEFGabcd
z If the condition is not improved with Auto Adjust, adjust
25
abcdefgABCDEFGabcd
“Clock Phase” till you get clearest image.
z Try “Auto Adjust”.
z If the condition is not improved with Auto Adjust, adjust
“Clock Phase” till you gets flicker-free display.
z It could happen when the image with more than 768 lines
of vertical resolution is displayed.
Please note this is not malfunction.
25
PRODUCT SPECIFICATIONS
32LD9000TA
Display dimensions
Approx. 32inches
(698 (H) x 392 (V) mm, diagonal
801mm)
Resolution
1366 (H) x 768 (V) pixels
Panel
Net dimensions
Excluding Stand:
Net weight
Temperature
Ambient
conditions
Relative Humidity
26LD9000TA
Approx. 26 inches
(626.0(H) ×373.0(V)mm, diagonal
600.53 mm)
790 (W) x 550 (H) x 120 (D) mm
624(W) x 507(H) x 250(D)
Including Speakers / Stand: 19kg
13.5 Kg
Operating: 5°C to 35°C, Storage: 0°C to 40°C
Operating: 20% to 80%, Storage: 20% to 90% (non-condensing)
Power supply
AC100 - 240V, 50/60Hz
Power consumption/at standby
135W/1W
125W/1W
Audio output
20W
14W
Speaker total
ENGLISH
SPECIFICATION
(VIDEO input)
Input terminals
AV1.2: composite video input terminal (RCA)
L/R audio input terminal (RCA)
AV3.4: component video input terminal (RCA)
L/R audio input terminal (RCA)
HDMI : HDMI input terminal
Input signals
Composite video: PAL, SECAM, NTSC3.58, NTSC4.43, PAL60
Component video: 480i, 576i, 480p, 576p, 720p/50, 720p/60, 1080i/50, 1080i/60
Output signals
OUTPUT (MONITOR): composite video monitor-output terminal (RCA)
OUTPUT (MONITOR): L/R audio monitor- output terminal (RCA)
OUTPUT (HEADPHONE): L/R audio monitor- output terminal (Mini-pin)
OUTPUT (SUB-WOOFER): Woofer output terminal
(RF input)
Input terminal / Receiving range
ANT: 75Ω Unbalanced / 38~884MHz
RF Video System
RAL B, G, H / I / D, K
SECAM B, G / D, K / K1
NTSC-M
(RGB input)
Input terminals
Analog RGB input terminal (D-sub 15-pin)
Audio input terminal (3.5mm Stereo Mini Jack)
Input signals
0.7 V, analog RGB (Recommended Signal)
Sync signals
H/V separate, TTL level [2K Ω]
● The television takes at least 30 minutes to attain the status of optimal picture quality.
39
PRODUCT SPECIFICATIONS (continued)
Signal Input
RGB terminal (D-SUB 15-PIN CONNECTOR)
Pin
Input signal
1
2
3
4
5
6
7
8
9
10
R
G or sync on green
B
No connection
No connection
R.GND
G.GND
B.GND
No connection
GND
11
No connection
12
13
14
15
[SDA]
H. sync
V.sync. [V.CLK]
[SCL]
S-input connector pin specifications
Pin
1
Input Signal
Y
2
Y-GND
3
C
4
C-GND
Frame
GND
HDMI Connector Input pin specifications
Pin
Input Signal
Pin
Input Signal
1
T.M.D.S. Data2+
11
TMDS Clock Shield
2
T.M.D.S. Data2
12
TMDS Clock
3
T.M.D.S. Data2-
13
CEC
4
T.M.D.S. Data1+
14
Reserved(N.C. on
5
T.M.D.S. Data1
15
SCL
6
T.M.D.S. Data1-
16
SDA
7
T.M.D.S. Data0+
17
DDC/CED Ground
8
T.M.D.S. Data0
18
+5V Power
9
T.M.D.S. Data0-
19
Hot Plug Detect
10
T.M.D.S. Clock+
40
When different kinds of input signals are
simultaneously input to the TV via a graphics board or
the like, the TV only support H/V separate sync signal.
PRODUCT SPECIFICATIONS (continued)
ENGLISH
Recommended Signal List
With HDMI INPUT
Signal mode
No.
1
2
3
4
5
6
7
8
9
Signal Name
Resolution
VGA
480i
480P
576i
576P
720P/60
720P/50
1080i/60
1080i/50
640x480
720(1440)x480
720x480P
720(1440)x576
720x576P
1280x720
1280x720
1920x1080
1920X1080
Vertical
frequency
(Hz)
59.94
60
60
50
50
60
50
59.94
50
Horizontal
frequency
(kHz)
Dot clock
frequency
(MHz)
31.47
15.75
31.5
15.63
31.25
45
37.5
33.75
28.13
25.18
27.00
27.00
27.00
27.00
74.25
74.25
74.25
74.25
Remarks
With RGB input
Signal mode
Horizontal
Dot clock
Vertical
frequency
frequency
Remarks
Signal Name
Resolution
frequency
(kHz)
(MHz)
(Hz)
1
VGA
720 x 400
70.09
31.47
25.18
2
VGA
640 x 480
59.94
31.47
25.18
3
SVGA
800 x 600
56.25
35.16
36.0
4
SVGA
800 x 600
60.32
37.88
40.0
5
SVGA
800 x 600
72.19
48.08
50.0
6
XGA
1024 x 768
60.00
48.36
65.0
7
XGA
1024 x 768
70.07
56.48
75.0
The type of video board or connecting cable used may not allow for correct displays adjustment of Horizontal Position,
Vertical Position, Horizontal Clock and Clock Phase.
The television may fail to display an animation image correctly when a signal having a vertical frequency of 72Hz or
higher is input to it.
The television differentiates the signal modes according to the horizontal and vertical frequencies and the horizontal
and vertical sync signal polarities. Note that different signals having all these elements alike may be handled as the
same signal.
Displaying images with more than 768 lines of vertical resolution a Full display (compressed display) can result in the
interpolation of stripes.
No.
z
z
z
z
41
Download PDF