Universal Bowl Cutters Instruction Manual

Universal Bowl Cutters
Model FP-CN-0003/ FP-CN-0005
Item 10916/ 10917
Instruction Manual
Revised - 6/19/2015
Toll Free: 1-800-465-0234
Fax: 905-607-0234
Email: sales@omcan.com
www.omcan.com
Table of Contents
Model FP-CN-0003/ FP-CN-0005
Section
Page
General Information ------------------------------------------------------------------------------------------ 3 - 4
Safety and Warranty --------------------------------------------------------------------------------------------- 4
Technical Specifications --------------------------------------------------------------------------------------- 5
Installation ---------------------------------------------------------------------------------------------------------- 6
Operation ----------------------------------------------------------------------------------------------------------- 6
Parts Breakdown --------------------------------------------------------------------------------------------- 7-10
Warranty Registration ----------------------------------------------------------------------------------------- 11
2
General Information
Omcan Manufacturing and Distributing Company Inc. and Food Machinery of America, Inc. dba Omcan
are not responsible for any harm or injury caused due to any person’s improper or negligent use of
this equipment. The product shall only be operated by someone over the age of 18, of sound mind, and
not under the influence of any drugs or alcohol, who has been trained in the correct operation of this
machine, and is wearing authorized, proper safety clothing. Any modification to the machine voids any
warranty, and may cause harm to individuals using the machine or in the vicinity of the machine while
in operation.
CHECK PACKAGE UPON ARRIVAL
Upon receipt of an Omcan shipment please inspect for external damage. If no damage is evident on the
external packaging, open carton to ensure all ordered items are within the box, and there is no concealed
damage to the machine. If the package has suffered rough handling, bumps or damage (visible or concealed),
please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may
initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be
filled out within three days, from the delivery date shown in the shipping documents. Omcan has no recourse
for damaged products that were shipped collect or third party.
Omcan Fabrication et distribution Companie Limité et Food Machinery d’Amerique, dba Omcan ne
sont pas responsables de tout dommage ou blessure causé du fait que toute personne ait utilisé
cet équipement de façon irrégulière. Le produit ne doit être exploité que par quelqu’un de plus de 18
ans, saine d’esprit, et pas sous l’influence d’une drogue ou d’acohol, qui a été formé pour utiliser
cette machine correctement, et est vêtu de vêtements de sécurité approprié. Toute modification de la
machine annule toute garantie, et peut causer un préjudice à des personnes utilisant la machine ou
des personnes à proximité de la machine pendant son fonctionnement.
VÉRIFIEZ LE COLIS DÈS RÉCEPTION
Dès réception d’une expédition d’Omcan veuillez inspecter pour dommages externes. Si aucun dommage
n’est visible sur l’emballage externe, ouvrez le carton afin de s’assurer que tous les éléments commandés
sont dans la boîte, et il n’y a aucun dommage dissimulé à la machine. Si le colis n’a subi aucune mauvaises
manipulations, de bosses ou de dommages (visible ou cachée), notez-le sur le bond de livraison avant
d’accepter la livraison et contactez Omcan dans les 24 heures qui suivent, pour que nous puissions engager
une réclamation auprès du transporteur. Un rapport détaillé sur l’étendue des dommages causés à la machine
doit être rempli dans un délai de trois jours, à compter de la date de livraison indiquée dans les documents
d’expédition. Omcan n’a aucun droit de recours pour les produits endommagés qui ont été expédiées ou cueilli
par un tiers transporteur.
Omcan Empresa De Fabricacion Y Distribucion Inc. Y Maquinaria De Alimentos De America, Inc. dba
Omcan no son responsables de ningun daño o perjuicío causado por cualquier persona inadecuada o
el uso descuidado de este equipo. El producto solo podra ser operado por una persona mayor de 18
años, en su sano juicio y no bajo alguna influencia de droga o alcohol, y que este ha sido entrenado
en el correcto funcionamiento de esta máquina, y ésta usando ropa apropiada y autorizada. Cualquier
modificación a la máquina anúla la garantía y puede causar daños a las personas usando la máquina
mientras esta en el funcionamiento.
3
General Information
REVISE EL PAQUETE A SU LLEGADA
Tras la recepcion de un envio Omcan favor inspeccionar daños externos. Si no hay daños evidentes en el
empaque exterior, Habra el carton para asegurararse que todos los articulos solicitados ésten dentro de la
caja y no encuentre daños ocultos en la máquina. Si el paquete ha sufrido un manejo de poco cuidado, golpes
o daños (visible o oculto) por favor anote en la factura antes de aceptar la entrega y contacte Omcan dentro
de las 24 horas, de modo que podamos iniciar una reclamación con la compañia. Un informe detallado sobre
los daños causados a la máquina debe ser llenado en el plazo de tres días, desde la fecha de entrega que se
muestra en los documentos de envío. Omcan no tiene ningun recurso por productos dañados que se enviaron
a recoger por terceros.
Safety and Warranty
WARNING
PLEASE READ THE USER MANUAL CAREFULLY BEFORE OPERATING THE MACHINE
This manual has been prepared to enable the correct installation, regulation and maintenance of the unit. It
is therefore of basic importance that the warnings contained in this booklet are carefully read as they supply
essential indications regarding the safety of the installation, use and maintenance. The appliance must be
installed, tested and serviced by qualified personnel only. Any adjustment whatsoever not expressly authorized
and in disrespect of this manual voids the warranty. Observe all existing local regulations at the time of
installation. The packing materials (plastic bags, polystyrene, nails, etc.) as potential hazards, must be kept out
of the reach of children and properly recycled according to the existing local regulations. For repairs contact
Omcan and request the use of original spare parts. If in doubt do not use the appliance and contact Omcan.
Not following the above conditions could risk the safety of those using the unit.
QS series universal fitter is the newly designed and made for high performance. It can cut meat, ginger, garlic,
peanuts, beans and many more! QS series universal fritter is easy to operate and highly efficient which is
suitable for your food preparation needs.
1 YEAR PARTS AND LABOUR WARRANTY
Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule an Omcan authorized
service technician to repair the equipment locally.
Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures not
improper use.
Please see http://www.omcan.com/warranty.html for complete information.
4
Safety and Warranty
WARNING:
The packaging components are classified as normal solid urban waste and can therefore be disposed
of without difficulty. In any case, for suitable recycling, we suggest disposing of the products separately
(differentiated waste) according to the current norms.
DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!
Technical Specifications
Model
Bowl Capacity
RPM
Motor Power
Rated Input Power
Electrical
Weight
Dimensions (DWH)
Item Number
FP-CN-0003
3L/ 3.2 QT
1400
0.65 kW/ 0.88 HP
0.88 kW/ 1.2 HP
110V/ 60/ 1
70.5 lbs./ 32 kg.
10” x 12” x 19”/ 254 x 304.8 x 482.6 mm
10916
Model
FP-CN-0005
Bowl Capacity
RPM
Motor Power
Rated Input Power
Electrical
Weight
5L/ 5.3 QT
1400
1.5 kW/ 2 HP
1.9 kW/ 2.5 HP
110V/ 60/ 1
85.8 lbs./ 38.9 kg.
Dimensions (DWH)
Item Number
15” x 12” x 21”/ 381 x 304.8 x 533.4 mm
10917
5
Installation & Operation
1. Place the machine on the table or floor with a leveled surface and attach the power line with the proper
connection. Make sure the plug is properly secured.
2. Before use, check whether the voltage matches with the rating plate.
3. Open the barrel head, take out the knife (Note: do not touch the bowl’s side and orientation area , avoid to
attain the knife’s mouth).
4. Hold the bowl’s handle, press the safety handle on the bottom, run the bowl clockwise and remove the bowl.
5. Clean the bowl, knife and barrel head with a clean cloth.
6. Place the bowl in a 20 degree position with the handle facing forward then turn counter-clockwise.
7. Install knife and cover the bowl lid. The safety button on the barrel head should be aimed at the handle of
the bowl and the lock button should be used to safely secure the bowl. If not secured properly the machine will
not start.
8. Turn the knob switch to , press the start button and turn the knob switch to “0” . Check if the knife is properly
placed through the clarity glass on top the cover to ensure proper rotation.
9. Confirm that the knife’s turning, open the back bowl cover, place the food in the machine and cover it (Note:
cover the bowl after the knife stops running). Depending on the food placed in the bowl, the power selected for
Item:10917 can be turned to power “1” or “2” and then can the machine be turned on.
10. Turn the knob to “0” to turn off the machine . Typically, the food should be placed in the cutter for a
minimum of 10 seconds to thoroughly cut food but users can cut their food as they desire.
11. To maintain this unit, clean all the parts with a clean cloth.
TIME RECOMMENDATION FOR CUTTING FOOD
Food
Meat
Ginger
Garlic
Peanut
Bean
Time
13 secs
45 secs
30 secs
18 secs
15 secs
* The above time is just for reference, user can process the food to their thickness.
6
Parts Breakdown
Model FP-CN-0003 10916
23437 1
23438 2
18 23454
19 23455
23439 3
20 23456
21 23457
23440 4
23441 5
23442 6
23443 7
23444 8
23445 9
23446 10
17
23453
22 23458
16 23452
15
23451
23 23459
23447 11
23448 12
23449 13
14
23450
7
24 Bottom Plate 23460
25 Bottom Foot 23461
Parts Breakdown
Model FP-CN-0003 10916
Item No.
OMCD ID
Description
Position
23437
QS50301
Bowl Cover
1
23438
QS50302
Rubber Ring
2
23439
QS50303
Knife
3
23440
QS50304
Tight Screw
4
23441
QS50305
Set Pin
5
23442
QS50306
Set pole
6
23443
QS50307
Bump Pole I
7
23444
QS50308
Round Screw
8
23445
QS50309
Bump Pole II
9
23446
QS50310
Pressure Sping
10
23447
QS50311
Set Screw
11
23448
QS50312
Change Switch
12
23449
QS50313
Start/ Stop Button
13
23450
QS50314
Rack
14
23451
QS50315
Switch Seat
15
23452
QS50316
Bowl Adjust Ring
16
23453
QS50317
Copper Setting
17
23454
QS50318
Screw
18
23455
QS50319
Bowl
19
23456
QS50320
Six Angle Screw
20
23457
QS50321
Motor Set Plate
21
23458
QS50322
Six Angle Screw
22
23459
QS50323
Motor
23
23460
QS50324
Bottom Plate
24
23461
QS50325
Bottom Foot
25
8
Parts Breakdown
Model FP-CN-0005 10917
23412 1
23413 2
18 23429
19 23430
23414 3
20 23431
21 23432
23415 4
23416 5
23417 6
23418 7
23419 8
23420 9
23421 10
17
23428
22 23433
16 23427
15
23426
23 23434
23422 11
31517, 23423 12
31518, 13
31520,
23424
14
23425
9
24 Bottom Plate 23435
25 Bottom Foot 23436
Parts Breakdown
Model FP-CN-0005 10917
Item No.
OMCD ID
Description
Position
23412
QS505A01
Bowl Cover
1
23413
QS505A02
Rubber Ring
2
23414
QS505A03
Knife
3
23415
QS505A04
Tight Screw
4
23416
QS505A05
Set Pin
5
23417
QS505A06
Set pole
6
23418
QS505A07
Bump Pole I
7
23419
QS505A08
Round Screw
8
23420
QS505A09
Bump Pole II
9
23421
QS505A10
Pressure Sping
10
23422
QS505A11
Set Screw
11
31517, 23423
QS505A12
Change Switch
12
31518, 31520, 23424
QS505A13
Start/ Stop Button
13
23425
QS505A14
Rack
14
23426
QS505A15
Switch Seat
15
23427
QS505A16
Bowl Adjust Ring
16
23428
QS505A17
Copper Setting
17
23429
QS505A18
Screw
18
23430
QS505A19
Bowl
19
23431
QS505A20
Six Angle Screw
20
23432
QS505A21
Motor Set Plate
21
23433
QS505A22
Six Angle Screw
22
23434
QS505A23
Motor
23
23435
QS505A24
Bottom Plate
24
23436
QS505A25
Bottom Foot
25
10
Electrical Schematics
10917
10916
Code
Name
M
KM
SB1
SA
FR
SB
Motor
Contractor
Stop Button
Change Switch
Heat Relay
SQ
SQ1
FU
TC
Journew Switch
Centrigal switch
Fusioner
Transformer
Start Button
11
Notes
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
12
Notes
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
13
Notes
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
14
Warranty Registration
Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear off the card at
the perforation and then send to the address specified below. You can also register online by visiting:
Merci d’avoir acheté un produit Omcan. Pour enregistrer votre garantie pour ce produit, complétez les informations ci-dessous, détachez la
carte au niveau de la perforation, puis l’envoyer à l’adresse spécifié ci-dessous. Vous pouvez également vous inscrire en ligne en visitant:
Gracias por comprar un producto Omcan usted. Para registrar su garantía para este producto, complete la información a continuación,
cortar la tarjeta en la perforación y luego enviarlo a la dirección indicada a continuación. También puede registrarse en línea en:
www.omcan.com/warrantyregistration.html
For mailing in Canada
For mailing in the US
Pour postale au Canada
Pour diffusion aux États-Unis
Por correo en Canadá
Por correo en los EE.UU.
OMCAN INC.
OMCAN
PRODUCT WARRANTY REGISTRATION
3115 Pepper Mill Court,
Mississauga, Ontario
PRODUCT WARRANTY REGISTRATION
4450 Witmer Industrial Estates, Unit 4,
Niagara Falls, New York
Canada, L5L 4X5
USA, 14305

Purchaser’s Information
Name:
Company Name:
Address:
Telephone:
City:
Province or State:
Postal or Zip:
Country:
Email Address:
Type of Company:
Dealer from which Purchased:
Dealer City:
Dealer Province or State:
Invoice:
Restaurant
Bakery
Deli
Butcher
Supermarket
Caterer
Institution (specify):
Other (specify):
Model Name:
Model Number:
Serial Number:
Machine Description:
Date of Purchase (MM/DD/YYYY):
Date of Installation (MM/DD/YYYY):
Thank you for choosing Omcan | Merci d’avoir choisi Omcan | Gracias por elegir Omcan
Since 1951 Omcan has grown to become a leading distributor of equipment and supplies to the North
American food service industry. Our success over these many years can be attributed to our commitment
to strengthen and develop new and existing relationships with our valued customers and manufacturers.
Today with partners in North America, Europe, Asia and South America, we continually work to improve
and grow the company. We strive to offer customers exceptional value through our qualified local sales
and service representatives who provide convenient access to over 3,500 globally sourced products.
Depuis 1951 Omcan a grandi pour devenir un des “leaders” de la distribution des équipements et
matériel pour l’industrie des services alimentaires en Amérique du Nord. Notre succès au cours de ces
nombreuses années peut être attribué à notre engagement à renforcer et à développer de nouvelles
et existantes relations avec nos clients et les fabricants de valeur. Aujourd’hui avec des partenaires en
Amérique du Nord, Europe, Asie et Amérique du Sud, nous travaillons continuellement à améliorer et
développer l’entreprise. Nous nous efforçons d’offrir à nos clients une valeur exceptionnelle grâce à
nos ventes locales qualifiées et des représentants de service qui offrent un accès facile à plus de 3500
produits provenant du monde entier.
Desde 1951 Omcan ha crecido hasta convertirse en un líder en la distribución de equipos y suministros
de alimentos en América del Norte industria de servicios. Nuestro éxito en estos años se puede atribuir
a nuestro compromiso de fortalecer y desarrollar nuevas relaciones existentes con nuestros valiosos
clientes y fabricantes. Hoy con socios de América del Norte, Europa, Asia y América del Sur, que trabajan
continuamente para mejorar y crecer la empresa. Nos esforzamos por ofrecer a nuestros clientes valor
excepcional a través de nuestro local de ventas y representantes de los servicios que proporcionan un
fácil acceso a más de 3,500 productos con origen a nivel mundial.
Download PDF