LED Festoon Lamp Holder User Manual

LED Festoon Lamp Holder User Manual
1. This manual is applied to the following models only:
SBH-210
2. Specification
Dimension
L 2 ¼” x W 5/8” x H ¾” (55x16x18
mm)
Standard Base
Festoon
Color
Black / White
Compatible Lamp
Type
Xenon ( Max.10W ) or LED festoon
lamps ( Max.1W ), length 1 ¾” ( 44 ± 1
mm)
Mounting Track
Used for WAC linear track systems
Temperature
rating
Maximum operating temperature of the
feed connector and fittings is
194ºF(90ºC).
UL Listed
Complies with UL-1574
3. Installation instruction
•
Lamping on this lamp holder has no polarity. Refer to drawings for
detailed mounting ocedure.
•
Multiple Lamp holders can then be connected to linear track systems.
•
Be sure that the total lamp power load does not exceed the
transformer’s power capacity.
•
Working ambient temperature:
-4ºF − 122ºF(-20ºC − 50ºC).
•
The lamp working temperature is warm, please be cautious when
uninstalling the lamps or lamp holders from the track.
•
The lamp and lamp holder are not waterproof
and for indoor use only.
Retain these instructions for future service and adjustments
44 Harbor Park Drive, Port Washington, NY 11050
Tel: (800) 526-2588 Fax (800) 526-2585
www.waclighting.com
Download PDF