User Manual Snapshot

Snapshot
Use on Dimmer
Outdoor Use
Sound Activated
DMX
Master/Slave
Auto-ranging
Power Supply
Replaceable Fuse
User Serviceable
Duty Cycle
User Manual
3000 N 29th Ct, Hollywood, FL 33020 U.S.A.
(800) 762-1084 – (954) 929-1115
FAX (954) 929-5560
www.chauvetlighting.com
TABLE OF CONTENTS
1. BEFORE YOU BEGIN ................................................................................................................................................... 3
WHAT IS INCLUDED ................................................................................................................................................................................ 3
UNPACKING INSTRUCTIONS .................................................................................................................................................................... 3
AC POWER........................................................................................................................................................................................... 3
SAFETY INSTRUCTIONS .......................................................................................................................................................................... 4
NON-INTERLOCKED HOUSING WARNING ..................................................................................................................................... 5
LASER SAFETY AND OPERATING INSTRUCTIONS ...................................................................................................................... 5
LASER EMISSION DATA ................................................................................................................................................................... 7
LASER EXPOSURE WARNING ............................................................................................................................... 7
2. INTRODUCTION ........................................................................................................................................................... 8
FEATURES ............................................................................................................................................................................................ 8
ADDITIONAL FEATURES .......................................................................................................................................................................... 8
DMX CHANNEL SUMMARY ..................................................................................................................................................................... 8
PRODUCT OVERVIEW............................................................................................................................................................................. 9
Back Panel View ....................................................................................................................................................... 9
PRODUCT DIMENSIONS ........................................................................................................................................................................ 10
PROPER USAGE .................................................................................................................................................................................. 11
3. SETUP ........................................................................................................................................................................ 12
MOUNTING.......................................................................................................................................................................................... 12
Orientation .............................................................................................................................................................. 12
Rigging ................................................................................................................................................................... 12
Power Linking ......................................................................................................................................................... 12
4. OPERATING INSTRUCTIONS .................................................................................................................................... 13
NAVIGATING THE CONTROL PANEL........................................................................................................................................................ 13
DMX OPERATION................................................................................................................................................................................ 13
STANDALONE OPERATION .................................................................................................................................................................... 14
Automatic ................................................................................................................................................................ 14
Sound-Active .......................................................................................................................................................... 14
Laser Sky ................................................................................................................................................................ 14
MASTER/SLAVE OPERATION................................................................................................................................................................. 14
MENU FUNCTIONS ............................................................................................................................................................................... 15
DMX CHANNEL VALUES ...................................................................................................................................................................... 16
Channel 2 Values (Pattern Selection)...................................................................................................................... 17
5. APPENDIX .................................................................................................................................................................. 18
RETURNS PROCEDURE ........................................................................................................................................................................ 18
CLAIMS .............................................................................................................................................................................................. 18
SETTING THE STARTING ADDRESS ........................................................................................................................................................ 18
GENERAL TROUBLESHOOTING .............................................................................................................................................................. 19
CONTACT US ...................................................................................................................................................................................... 19
TECHNICAL SPECIFICATIONS ................................................................................................................................................................ 20
CHAUVET®, 2009, All Rights Reserved
Information and specifications in this User Manual are subject to change without
notice. CHAUVET® assumes no responsibility or liability for any errors or
inaccuracies that may appear in this manual.
Scorpion™ GBC User Manual
2
12/17/2009 10:50 AM
1. BEFORE YOU BEGIN
What is included




1 x Scorpion™ GBC
1 x Power cable
1 x Warranty Card
1 x User Manual
Unpacking Instructions
Immediately upon receiving a fixture, carefully unpack the carton, check the contents to ensure that
all parts are present, and have been received in good condition. Notify the shipper immediately and
retain packing material for inspection if any parts appear damaged from shipping or the carton itself
shows signs of mishandling. Save the carton and all packing materials. In the event that a fixture
must be returned to the factory, it is important that the fixture be returned in the original factory box
and packing.
AC Power
This fixture has an auto-ranging power supply that can accommodate a wide range of input voltages.
The only thing necessary to do before powering on the unit is to make sure the line voltage you are
applying is within the range of accepted voltages. This fixture will accommodate between
100~240 VAC, 50/60 Hz. All fixtures must be powered directly off a switched circuit and cannot be run
off a rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer channel is used
solely for a 0% to 100% switch.
Scorpion™ GBC User Manual
3
12/17/2009 10:50 AM
Safety Instructions
Please read these instructions carefully, which includes important
information about the installation, usage and maintenance of this
product.
Please keep this User Manual for future consultation. If you sell the unit to another user, be sure that
they also receive this instruction booklet.
Always make sure that you are connecting to the proper voltage, and that the line voltage you are
connecting to is not higher than that stated on the decal or rear panel of the fixture.
This product is intended for indoor use only! To prevent risk of fire or shock, do not expose fixture to
rain or moisture.
Make sure there are no flammable materials close to the unit while operating.
The unit must be installed in a location with adequate ventilation, at least 20 in (50 cm) from adjacent
surfaces. Be sure that no ventilation slots are blocked.
Always disconnect from power source before servicing or replacing fuse and be sure to replace with
same fuse size and rating.
Secure fixture to fastening device using a safety chain.
Maximum ambient temperature (Ta) is 104° F (40° C). Do not operate fixture at temperatures higher
than this.
In the event of a serious operating problem, stop using the unit immediately. Never try to repair the
unit by yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please
contact the nearest authorized technical assistance center.
Never connect the device to a dimmer pack.
Make sure the power cord is never crimped or damaged.
Never disconnect the power cord by pulling or tugging on the cord.
Avoid direct eye exposure to the light source while it is on.
Lasers can be hazardous and have unique safety considerations. Permanent eye injury and
blindness is possible if lasers are used incorrectly. Pay close attention to each safety REMARK and
WARNING statement in the user manual. Read all instructions carefully BEFORE operating this
device.
Caution!
Avoid direct eye contact with laser light. Never intentionally expose your eyes or others to
direct laser light.
Caution!
This laser product can potentially cause instant eye injury or blindness if laser light directly
strikes the eyes.
Caution!
It is illegal and dangerous to shine this laser into audience areas, where the audience or other
personnel could get direct laser beams or bright reflections into their eyes.
Caution!
It is a US Federal offense to shine any laser at aircraft.
Caution!
Use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
Caution!
There are no user serviceable parts inside the unit. Do not open the housing or attempt any
repairs yourself. In the unlikely event your unit may require service, please contact the dealer
nearest to you.
Scorpion™ GBC User Manual
4
12/17/2009 10:50 AM
NON-INTERLOCKED HOUSING WARNING
This unit contains high power laser devices internally. Do not open the laser housing, due to potential exposure to unsafe
levels of laser radiation. The laser power levels accessible, if the unit is opened, can cause instant blindness, skin burns
and fires.
LASER SAFETY AND OPERATING INSTRUCTIONS
STOP AND READ ALL LASER SAFETY DATA
Laser Light is different from any other light sources with which you may be familiar. The light from this product can
potentially cause eye injury if not set up and used properly. Laser light is thousands of times more concentrated than light
from any other kind of light source. This concentration of light can cause instant eye injuries, primarily by burning the
retina (the light sensitive portion at the back of the eye). Even if you cannot feel “heat” from a laser beam, it can still
potentially injure or blind you or your audience. Even very small amounts of laser light are potentially hazardous even at
long distances. Laser eye injuries can happen quicker than you can blink.
It is incorrect to think that because these laser entertainment products split the laser into hundreds of beams that the laser
beam is scanned out in high speed, that an individual laser beam is safe for eye exposure. This laser product uses
dozens of milliwatts of laser power (Class 3B levels internally) before it splits into multiple beams (Class 3R levels). Many
of the individual beams are potentially hazardous to the eyes.
It is also incorrect to assume that because the laser light is moving, it is safe. This is not true. Nor, do the laser beams
always move. Since eye injuries can occur instantly, it is critical to prevent the possibility of any direct eye exposure. In the
laser safety regulation, it is not legal to aim Class 3R lasers in areas which people can get exposed. This is true even if it
is aimed below people’s faces, such as on a dance floor.
Do not operate the laser without first reading and understanding all safety and technical data in this
manual.
Always set up and install all laser effects so that all laser light is at least 3 meters (9.8 feet) above the floor
on which people can stand. See “Proper Usage” section later in this manual.
After set up, and prior to public use, test laser to ensure proper function. Do not use if any defect is
detected. Do not use if laser emits only one or two laser beams rather than dozens/hundreds, as this could
indicate damage to the diffraction grating optic, and could allow emission of higher laser levels above
Class 3R.
Do not point lasers at people or animals.
Never look into the laser aperture or laser beams.
Do not point lasers in areas in which people can potentially get exposed, such as uncontrolled balconies,
etc.
Do not point lasers at highly reflective surfaces, such as windows, mirrors and shiny metal. Even laser
reflections can be hazardous.
Never point a laser at aircraft, this is a federal offense.
Never point un-terminated laser beams into the sky.
Do not expose the output optic (aperture) to cleaning chemicals.
Do not use laser if the laser appears to be emitting only one or two beams.
Do not use the laser if the housing is damaged, open, or if the optics appear damaged in any way.
Never open the laser housing. The high laser power levels inside of the protective housing can start fires,
burn skin and will cause instant eye injury.
Never leave this device running unattended.
The operation of a class 3R laser show is only allowed if the show is controlled by a skilled and welltrained operator, familiar with the data included in this manual.
The legal requirements for using laser entertainment products vary from country to country. The user is
responsible for the legal requirements at the location/country of use.
Always use appropriate lighting safety cables when hanging lights and effects overhead.
Scorpion™ GBC User Manual
5
12/17/2009 10:50 AM
LASER SAFETY LABEL REPRODUCTION
EXPLANATORY, MANUFACTURER’S ID &
CERTIFICATION LABEL
CAUTION – CLASS 3B
LASER RADIATION
WHEN OPEN. AVOID
EXPOSURE TO BEAM
NON INTERLOCKED HOUSING LABEL
LASER HAZARD WARNING LABEL
LASER APERTURE LABEL
Scorpion™ GBC User Manual
6
12/17/2009 10:50 AM
LASER EXPOSURE WARNING
LASER LIGHT
AVOID DIRECT EYE EXPOSURE
Further guidelines and safety programs for safe use of lasers can be found in the ANSI Z136.1 Standard “For Safe Use of
Lasers”, available from the Laser Institute of America: www.laserinstitute.org. Many local governments, corporations,
agencies, military and others, require all lasers to be used under the guidelines of ANSI Z136.1. Laser Display guidance
can be obtained via the International Laser Display Association: www.laserist.org.
LASER EMISSION DATA
LASER CLASSIFICATION
CLASS 3R (EQUIV. TO US CLASS IIIA)
Green Laser Medium
DPSS Nd:YVO4, 532 nm
Blue Laser Medium
473 nm, typical
Beam Diameter
<5 mm at aperture
Pulse Data
All pulses < 4 Hz (>0.25 sec)
Divergence (each beam)
<2 mrad
Divergence (total light)
<160 degrees
Laser Power of Each
Beam from Aperture*
<5 mW
*As measured under IEC measurement conditions for classification.
LASER COMPLIANCE STATEMENT
This laser product complies with EN/IEC 60825-1 Ed 2, 2007-03, and US FDA/CDRH FLPPS via the terms of Laser
Notice No. 50 dated June 24, 2007. This laser device is Classified 3R. (Class 3R is the international equivalent of US
Class IIIa). No maintenance is required to keep this product in compliance with laser performance standards.
Scorpion™ GBC User Manual
7
12/17/2009 10:50 AM
2. INTRODUCTION
Features
10-channel DMX-512 controlled green, blue & cyan aerial effect laser
Programmable pan, tilt and zoom with separate X, Y, and Z rolling effects
32 built-in pattern selections each with adjustable parameters
Color selection of green, blue and/or cyan with strobe control
Built-in automatic programs via master/slave or DMX
Built-in sound activated programs via master/slave or DMX
Additional Features
Complies with FDA / CDRH standards for Class 3R
Multiple mounting locations for bracket
Additional power output: max 20 units
DMX Channel Summary
CHANNEL FUNCTION
1
Control Mode
2
Pattern Selection
3
Color selection
4
Color Changing Speed
5
Zoom
6
X Axis Move (Pan)
7
Y Axis Move (Tilt)
8
Y Axis Roll
9
X Axis Roll
10
Z Axis Rotate
Scorpion™ GBC User Manual
8
12/17/2009 10:50 AM
Product Overview
Back Panel View
Hanging
bracket
Laser Aperture
Bracket
adjustment knob
(1 of 2)
Power LED
Audio LED
Scorpion™ GBC User Manual
9
12/17/2009 10:50 AM
Product Dimensions
Scorpion™ GBC User Manual
10
12/17/2009 10:50 AM
Proper Usage
This fixture has been designed to be hung. It is recommended for safety purposes, your
lighting effects are properly mounted using a suitable hanging clamp and safety cable. Items
appropriate for safe and effective mounting are easily sourced from your lighting vendor.
International laser safety regulations require that lasers must be operated in the fashion
illustrated below, with a minimum of 3 meters (9.8 ft) of vertical separation between the floor
and the lowest laser light vertically. Additionally, 3 meters of horizontal separation is required
between laser light and audience or other public spaces.
3 meters
CAUTION: Use of controls, adjustments, or performance of
procedures other than what is specified herein may result in
hazardous radiation exposure
CAUTION: Use of controls, adjustments, or
performance of procedures other than what is
specified herein may result in hazardous radiation
exposure
Scorpion™ GBC User Manual
11
12/17/2009 10:50 AM
3. SETUP
Mounting
Orientation
This fixture may be mounted in any safe position, provided there is adequate room for
ventilation.
Hanging Clamp
Rigging
It is important never to obstruct the fan or vents pathway.
Mount the fixture using, a suitable “C” or “O” type clamp.
Adjust the angle of the fixture by loosening both knobs and
tilting the fixture. After finding the desired position, retighten
both knobs.
Note!
When selecting installation location, take into consideration
Clamp is sold separately.
access and routine maintenance.
Safety cables must always be used.
Never mount in places where the fixture will be exposed to rain, high humidity, extreme
temperature changes or restricted ventilation.
Do not use any tool on the bracket adjustment knob. Hand-tighten only!
Power Linking
This fixture contains power linking via the edison outlet located in front of the power input cable.
Please see the diagram below for further explanation.
The maximum number of fixtures that may be linked for this fixture is 20.
Additional
power link
Fixture #3
Fixture #2
Fixture #1
Scorpion™ GBC User Manual
12
12/17/2009 10:50 AM
4. OPERATING INSTRUCTIONS
Navigating the Control Panel
Access control panel functions using the four panel buttons located directly underneath the LED
Display.
Button
Function
<MODE>
Used to access the menu or to return to a
previous menu option
<UP>
Scrolls through menu options in ascending
order
<DOWN>
Scrolls through menu options in descending
order
<ENT>
Used to select and store the current menu
or option within a menu
MODE
UP
DOWN
ENT
The Control Panel LED Display shows the menu items you select from the menu map. When a menu
function is selected, the display will show immediately the first available option for the selected menu
function. To select a menu item, press <ENT>.
Use <UP> and <DOWN> to navigate the menu map and menu options. Press <ENT> to access the
menu function currently displayed or to enable a menu option. To return to the previous option or
menu without changing the value, press <MODE>.
DMX Operation
This is the operating mode which will allow for control with an external DMX controller. You
must set the starting address for this mode. If this is your first time using DMX, then it is
recommended that you refer to the “DMX Primer” section in the “Appendix” of this manual.
When operating in DMX receiving mode, the display will blink at a constant rate in
the absence of DMX signal.
Use the following procedure for setting the fixture to DMX operation.
1.
2.
3.
Scorpion™ GBC User Manual
Press <MODE> repeatedly until a number from 001~512 appears on the LED
display.
Use <UP> and <DOWN> to select the DMX starting address.
Press <ENT>.
13
12/17/2009 10:50 AM
Standalone Operation
Automatic
This fixture has preprogrammed automatic programs. These are accessed via the LED
display on the back panel of the product. Please see the instructions below for further
explanation.
1.
2.
3.
Press <MODE> until a standalone mode appears on the LED display. See the
chart under menu functions to identify these.
Use <UP> and <DOWN> to scroll through the standalone modes.
Press <ENT> when the desired automatic standalone mode has been located.
Sound-Active
This fixture has preprogrammed sound-triggered programs. These are accessed via the
LED display on the back panel of the product. The sound control adjustment knob may be
used to adjust the microphone sensitivity. Please see the instructions below for further
explanation.
1.
2.
3.
Press <MODE> until a standalone mode appears on the LED display. See the
chart under menu functions to identify these.
Use <UP> and <DOWN> to scroll through the standalone modes.
Press <ENT> when the desired sound standalone mode has been located.
Laser Sky
This fixture has preprogrammed laser sky programs. These are accessed via the LED
display on the back panel of the product. Please see the instructions below for further
explanation.
1.
2.
3.
Press <MODE> until a standalone mode appears on the LED display. See the
chart under menu functions to identify these.
Use <UP> and <DOWN> to scroll through the standalone modes.
Press <ENT> when the desired laser sky standalone mode has been located.
Master/Slave Operation
When operating more than one fixture in standalone mode, it is possible to link them in a
master/slave configuration. This is when one or more slave fixtures will operate identically
to the master fixture. Please see the instructions below for further explanation on how to set
a fixture to slave mode.
1.
2.
Press <MODE> until slave mode appears on the LED display. See the chart
under menu functions to identify this.
Press <ENT>.
A fixture that is operating in one of the standalone mode will function as a master unit when
the fixtures are linked using DMX cables in a daisy chain configuration.
Scorpion™ GBC User Manual
14
12/17/2009 10:50 AM
Menu Functions
MAIN FUNCTION
SELECTION
DESCRIPTION/VALUES
DMX mode
DMX starting address assignment
Automatic fast (blue)
Automatic slow (blue)
Automatic fast (green)
Automatic slow (green)
Automatic fast (cyan)
Automatic slow (cyan)
Automatic fast (mixed)
Standalone
modes
Automatic slow (mixed)
Sound (blue)
Sound (green)
Sound (cyan)
Sound (mixed)
Random
Laser sky (blue)
Laser sky (green)
Laser sky (cyan)
Laser sky (sound)
Slave Mode
Slave mode
Test Mode
Used for service purposes
Scorpion™ GBC User Manual
15
12/17/2009 10:50 AM
DMX Channel Values
CHANNEL VALUE
FUNCTION
1
000  017
018  035
036  053
054  071
072  089
090  107
108  125
126  143
144  161
162  179
180  197
198  215
216  233
234  255
Control Mode
Manual Mode
Automatic fast (blue)
Automatic slow (blue)
Automatic fast (green)
Automatic slow (green)
Automatic fast (cyan)
Automatic slow (cyan)
Automatic Fast (mixed)
Automatic Slow (mixed)
Sound (blue)
Sound (green)
Sound (cyan)
Sound (mixed)
Random (Auto)
2
000  255
Pattern selection (only when CH1 is between 000~017)
See the following page for channel values.
000  024
025  049
050  074
075  099
100  124
125  149
150  174
175  199
200  224
225  255
Color selection
Blackout
Preprogrammed Color
Blue
Green
Cyan
Alternate Blue-Green
Alternate Green-Cyan
Alternate Blue-Cyan
Alternate Blue-Green-Cyan
Color Roll
4
000  004
005  255
Color Changing Speed
Stop
Slow  fast
5
000  127
128  169
170  209
210  255
Zoom
100%~5%
Zoom In Macro
Zoom Out Macro
Zoom In and Out Macro
6
000  127
128  191
192  255
X-Axis Move (Pan)
128 different positions on Y-Axis
Move Left to right to Left (Slow  fast)
Move Left to right to Left (Fast  slow)
7
000  127
128  191
192  255
Y-Axis Move (Tilt)
128 different positions on X-Axis
Move Up to down to Up (Slow  fast)
Move Up to down to Up (Fast  slow)
8
000  127
128  191
192  255
X-Axis Roll
0~359 Y-Axis Roll
Roll (Slow  fast)
Roll (Fast  slow)
9
000  127
128  191
192  255
Y-Axis Roll
0~359 Y-Axis Roll
Roll (Slow  fast)
Roll (Fast  slow)
10
000  127
128  191
192  255
Rotate
0~359 Z-Axis Roll
Clockwise Rotate
Counterclockwise Rotate
3
Scorpion™ GBC User Manual
16
12/17/2009 10:50 AM
Channel 2 Values (Pattern Selection)
Value
Pattern
Value
Pattern
Value
Pattern
Value
000~007
064~071
128~135
190~197
008~015
072~079
136~143
198~205
016~023
080~087
144~151
206~213
024~031
088~095
152~159
214~221
032~039
096~103
160~167
222~229
040~047
104~111
168~175
230~237
048~055
112~119
176~181
238~245
056~063
120~127
182~189
246~255
Scorpion™ GBC User Manual
17
Pattern
12/17/2009 10:50 AM
5. APPENDIX
Returns Procedure
Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued.
Package must be clearly labeled with a Return Merchandise Authorization Number (RMA #).
Products returned without an RMA # will be refused. Call CHAUVET® and request RMA # prior to
shipping the fixture. Be prepared to provide the model number, serial number and a brief description
of the cause for the return. Be sure to properly pack fixture, any shipping damage resulting from
inadequate packaging is the customer’s responsibility. CHAUVET® reserves the right to use its own
discretion to repair or replace product(s). As a suggestion, proper UPS packing or double-boxing is
always a safe method to use.
Note:
If you are given an RMA #, please include the following information on a piece of
paper inside the box:
1) Your name
2) Your address
3) Your phone number
4) The RMA #
5) A brief description of the symptoms
Claims
Damage incurred in shipping is the responsibility of the shipper; therefore the damage must be
reported to the carrier upon receipt of merchandise. It is the customer's responsibility to notify and
submit claims with the shipper in the event that a fixture is damaged due to shipping. Any other claim
for items such as missing component/part, damage not related to shipping, and concealed damage,
must be made within seven (7) days of receiving merchandise.
Setting the Starting Address
This DMX mode enables the use of a universal DMX controller device. Each fixture requires a "start
address" from 1 to 512. A fixture requiring one or more channels for control begins to read the data
on the channel indicated by the start address. For example, a fixture that uses 6 DMX channels and
was addressed to start on DMX channel 100, would read data from channels: 100, 101, 102, 103,
104, and 105. Choose start addresses so that the channels used do not overlap, and note the start
address selected for future reference.
If this is your first time addressing a fixture using the DMX-512 control protocol, we suggest jumping
to the Appendix Section and reading the heading “DMX Primer”. It contains very useful information
that will help you understand its use.
Scorpion™ GBC User Manual
18
12/17/2009 10:50 AM
General Troubleshooting
Applies to
Symptom
Solution(s)
Lights
Foggers
& Snow
Controllers
Dimmers
& Chaser
Breaker/Fuse keeps
blowing
Check total load placed on device
Chase is too slow
Check user manual for speed adjustment



Device has no power
Check for power on Mains.
Check device’s fuse. (internal and/or external)



Loss of signal
Use only DMX cables
Install terminator
Note: Keep DMX cables separated from power cables
or black lights.


No laser output
Bounce mirror motor may have shifted during shipping;
readjust




If you still have a problem after trying the above solutions, please contact CHAUVET® Technical
Support.
Contact Us
World Wide
General Information
CHAUVET®
3000 North 29th Court
Hollywood, FL 33020
voice: 954.929.1115
fax:
954.929.5560
toll free: 800.762.1084
Technical Support
CHAUVET®
3000 North 29th Court
Hollywood, FL 33020
voice: 954.929.1115 (Press 4)
fax:
954.929.5560 (Attention: Service)
World Wide Web
www.chauvetlighting.com
Scorpion™ GBC User Manual
19
12/17/2009 10:50 AM
Technical Specifications
WEIGHT & DIMENSIONS
Length ........................................................................................................................ 11.3 in (287 mm)
Width.......................................................................................................................... 13.4 in (340 mm)
Height .......................................................................................................................... 9.1 in (230 mm)
Weight........................................................................................................................... 7.8 lbs (3.5 kg)
POWER
Auto-ranging power supply ..............................................................................100~240 VAC, 50/60 Hz
Fuse............................................................................................................ T 1.5 A, 250 V (slow-blow)
Power Consumption@ 120 V .................................................................................... 23 W (0.3 A) max
Inrush Current@ 120 V ................................................................................................................ 0.3 A
Power Consumption@ 230 V .................................................................................... 20 W (0.2 A) max
Inrush Current@ 230 V ................................................................................................................ 0.2 A
Power Output .................................................................................................................... 20 units max
LASER
Green diode ................................................................................................................. 532 nm, 30 mW
Blue diode .................................................................................................................... 473 nm, 40 mW
Laser Type .................................................................................................................................. DPSS
Cooling............................................................................................................................... Fan Cooled
RANGE
Coverage Angle .............................................................................................................................. 53°
THERMAL
Maximum ambient temperature ...................................................................................... 104° F (40° C)
CONTROL & PROGRAMMING
Data input ............................................................................................. locking 3-pin XLR male socket
Data output ........................................................................................ locking 3-pin XLR female socket
Data pin configuration ............................................................................ pin 1 shield, pin 2 (-), pin 3 (+)
Protocols .....................................................................................................................DMX-512 USITT
DMX Channels .................................................................................................................................. 10
ORDERING INFORMATION
Scorpion™ GBC......................................................................................................... SCORPIONGBC
WARRANTY INFORMATION
Warranty ........................................................................................................... 2-year limited warranty
Laser Diode Warranty ...................................................................................... 90-day limited warranty
Scorpion™ GBC User Manual
20
12/17/2009 10:50 AM
Download PDF