TECHNOMATE TM-7100 HD Owner Manual

TM-7102HD-T2 Super

INTRODUCTION

Overview

Main Features

EASY INSTALLATION GUIDE

SAFETY INFORMATION

CHECK POINTS BEFORE USE

Accessories

Satellite Dish

CONTROLS/FUNCTIONS

Front Panel

Rear Panel

Remote control

Front Display

EQUIPMENT CONNECTION

Connection With Antenna/ TV Set/ A/V System

OPERATION

Getting Started

System Settings

Edit Channels

EPG (Electronic Program Guide)

Games

USB Menu (How to download SW from USB)

System Information

Common Interface

Conditional Access System

DVR

PIP

HOW TO DOWNLOAD SOFTWARE FROM PC

TROUBLE SHOOTING

SPECIFICATIONS

BRIEF USER’S GUIDE IN FRANCH

51

53

55

57

1

2

4

7

9

10

15

17

2

OVERVIEW

This satellite receiver is designed for using both free-to-air and encrypted channel reception. Enjoy the rich choice of more than 10,000 different channels, broadcasting a large range of culture, sports, cinema, news, events, etc. This receiver is a technical masterpiece, assembled with the highest qualified electronic parts.

MAIN FEATURES

High-Definition Personal Video Recorder (HD PVR)

2x DVB-S/DVB-S2 Satellite Tuners (MPEG-2, MPEG-4 & H.264)

1x DVB-T / DVB-T2 Terrestrial Tuner

RF modulator (CH 21 - CH 69 PAL G, I, K, M)

Output resolution : 576p & 576i, 720p, 1080p & 1080i

2 Smart Card Reader & 2 Common Interfaces (2CI)

HDMI & Component Output (YPbPr) with Upscaler to Improve Picture Quality

10,000 TV & Radio Channels

MP3 player and JPEG viewer via internal HDD or USB flash Drive (memory stick)

Software & Channel List download via USB 2.0

Fully Featured VFD text Front Panel Display

Sensitive Tuner

Support 4:2:0

Less than 1 second channel change

Dolby Digital Optical S / PDIF

DiSEqC 1.0, 1.1, 1.2 & 1.3 (USALS) compatible

Auto Navigation system select as many satellites as you want to search

On-screen display with true full colour resolution

Enhanced 16 Favourite channel groups

Channel control by : Favourites, Lock, Skip, Move & Delete

Channel sort by : All, Alphavet, Transponder & CAS

Multilingual OSD Menu : English, Spanish, Portuguese, French, Dutch, German, Italian,

Turkish, Arabic, Russian, Persian, Greek, Czech, Romanian

Extended EPG and program reservation on EPG

Teletext & Subtitle by OSD and VBI

Last channel memory function

Factory default channel list

Various games

Software & channel list upgrade via RS-232C : PC to STB, STB to PC, STB-STB and USB

Parental, Installation & Receiver Lock

Zoom function on Pause & Live channel

Multipicture display

Support for multiple language broadcasts

SCPC & MCPC receivable from C/Ku band satellites LNBs supported : Universal, Single,

Single S & C band wideband LNBs

AC 100~250V 50/60Hz

LNB Short Circuit protection onboard

2 Scarts, (CVBS, RGB / Loop-through RGB) & S-Video

Supports up to 1TB S-ATA 3.5” & 2.5” Hard Disk Drives (HDD)

2x USB 2.0 Ports: PVR function using external HDD, playback MP3, JPEG Photos &

Software transfer

Record: 1. Channel from each tuner and playback a recording at the same time

2. Channels using the two satellite tuners (2 Channels have to be on the same Transponder TP)

3. Channels and playback a recording or watch another live channel at the same time

Lan 10/100Mbps Ethernet

Blind Search

Manufactured under license from Dolby Laboratories.

“Dolby” and the double-D Symbol are trademarks of Dloby Laboratories.

DiSEqC is a trademark of EUTELSAT

The digital receiver can supply a current 400 milliampere at maximum for antenna devices including LNB, DiSEqc switch and antenna rotor through each antenna input connection separately but not simultaneously.If there are too many antenna devices to be supplied with power through antenna input connections simultaneously for a long time, your LNBs may lack power to operate. So it is recommended to link the

LOOP OUT 1 connector to the LNB INPUT 2 connector with a loop cable even though the digital receiver is designed to operate over two antennas alternatively.

3

This receiver is preinstalled with 25 Satellite and 1500 default Channels and is fully configured.

No settings need to be changed.

After turning ON the receiver, select a language and Country. You will be taken to the

Viewing mode. Press the

SAT button on the Remote and select a satellite. To bring up the

Channel List, press the

OK button on the remote.

To delete unwanted Satellites-press the MENU button on the remote and go to Installation.

Press OK and OK on Satellite Setup. Press OK again and a Satellite List will appear. To delete a

Satellite, press the BLUE( ) button on the remote.

This receiver is preinstalled with 25 Satellite and 1500 default Channels, and is fully configured.No settings need to be changed.

Press the

MENU button on the remote.Press OK on Installation. Go to Motorised Setting and press

OK. Go to the Third line (DiSEqC Motor) and use the Left/Right arrow buttons on the remote to select

USALS. Then go to Position Setting and press OK. Then go to Longitude and

Latitude and enter the coordinates of where you live (London’s Longitude is 000. 1 West;

South of UK’s Latitude is 51.5 North).Press the

EXIT button on the remote. Go to GOTO and press

OK. Wait until the Signal Quality is more than 40% in the progress bar. When a Satellite is found, then all the selected 25 Satellites are fully configured for a Motorised system.

If the Signal Quality is below 40%, then the settings are incorrect and the Longitude needs to be adjusted, for example: 000.2, 000.3, 000.4,5/6/7/8/9 West or East. The Latitude may also need to be adjusted. If you still have not got a signal, then the external installation (dish, etc) needs to be adjusted.

Press the MENU button on the remote and go to Installation and press OK. Go to Motorised

Setting and press OK. Press OK again to open the satellite list. Select a satellite from the list and press OK. Go to the Third line (DiSEqC Motor) and use the Left/Right buttons on the remote to select DiSEqC 1.2. Go to Move and press and hold the Left/Right buttons on the remote until you get a Signal Quality of more than 40%. Go to Save and press

RED(

OK. Press the

)button on the remote to Scan. To scan extra satellites, repeat the above.

If you want to start the receiver without the preinstalled Satellites and Channels, press the

MENU button on the remote and go to System Settings and press the OK button. Go to

Factory Reset, press OK and enter 0000. Then select Factory Reset. Press OK and select Yes.

4

(

Press the

MENU button on the remote and press the OK button on Installation. Press OK on

Satellite Setup and

OK again to display a Satellite List. To add a Satellite, press the YELLOW

)button on the remote. Press the

EXIT button on the remote to exit the list.

When the Quality Bar is at its highest level, press the RED( the Satellite. To view a channel, press the OK button in

) button on the remote to Scan the Viewing Mode (clear screen) and select any channel. To view $ (Scrambled) channels, a

CAM (Decoder) and a viewing card are required.

Press the

MENU button on the remote and press the OK button on Installation. Press OK on

Satellite Setup and

OK again to display a Satellite List. Select a Satellite (e.g. Hotbird 13E and

Astra 19.2E) and press the

YELLOW button on the remote for each Satellite to Save. Press the

EXIT button on the remote to exit the list.

Go to DiSEqC Switching and select a Satellite (e.g. Hotbird 13E as Number 1 and Astra 19.2E as

Number 2). When the Quality Bar is at its highest level for each Satellite, press the RED ( ) button on the remote to Scan. To view a channel, press the OK button in the Viewing

Mode (clear screen) and select any channel. To view $ (Scrambled) channels, a CAM

(Decoder) and a viewing card are required.

If the above installation was not successful, change the DiSEqC Switching number, e.g. Hotbird

13E as Number 2 and Astra 19E as Number 1.

Press the MENU button on the remote and press the OK button on Installation. Press OK on

Satellite Setup and OK again to display a Satellite List. Select a Satellite (e.g. Hotbird 13E and

Astra 19.2E) and press the YELLOW button on the remote for each Satellite to Save.

Press the EXIT button on the remote to exit the list.

Press the EXIT button again. Press OK on Motorised Setting. Press OK again to display a Satellite

List. Select a Satellite and press OK. Go to the Third line (DiSEqC Motor) and use the Left/Right buttons on the remote to select DiSEqC 1.2. Go to Move and press and hold the Left/Right buttons on the remote until you get a Signal Quality of more than 40%. Go to Save and press

OK. Press the RED button on the remote to Scan. Repeat the above for more satellites.

Press the

MENU button on the remote and press the OK button on Installation. Press OK on

Satellite Setup and

OK again to display a Satellite List. Select a Satellite (e.g. Hotbird 13E and

Astra 19.2E) and press the

YELLOW (

) button on the remote for each Satellite to Save.

Press the

EXIT button on the remote to exit the list.

Press the

EXIT button again. Go to Motorised Setting and press OK. Go to the Third line (DiSEqC

Motor) and use the

Left/Right arrow buttons on the remote to select USALS. Then go to Position

Setting and press

OK. Then go to Longitude and Latitude and enter the coordinates of where you live (London’s Longitude is 000.1 West; South of UK’s Latitude is 51.5 North). Press the

EXIT

button on the remote. Go to

GOTO and press OK. Wait until the Signal Quality is more than 40% in the progress bar. Press the

RED (

) button on the remote to Scan.

5

If the Signal Quality is below 40%, then the settings are incorrect and the Longitude needs to be adjusted, for example : 000.2, 000.3, 000.4,5/6/7/8/9 West or East.

The Latitude may also need to be adjusted. If you still have not got a signal, then the external installation (dish, etc) needs to be adjusted.

Press

MENU button on the remote. Go to Factory Reset, Then go to Restore default channels.

Press

OK button on the remote, and input password and wait.

It will retrieve default channels.

Be sure to read the user’s manual before starting the operation of the unit.

Do not touch the power cord with wet hands as it may cause electric shock.

For Technomate Motorized Systems

Never open the cover. It is very dangerous to touch the inside of the unit due to the possibility of an electric shock.

Place the unit in a well ventilated and noheat environment.

6

When you do not use this unit for a long time, make sure that the power cord is pulled out from the outlet. Also do not use a damaged power cord as it may cause fire or electric shock.

A professional installation is required. If reception is interrupted, contact your local service centre.

7

Place the unit horizontally. An uneven placement may cause the unit to be damaged.

Do not put heavy items such as a TV on the unit. This may damage the unit.

ACCESSORIES

User’s manual : 1 Remote control : 1

Do not leave the unit near water.

Do not put water containing items such as vase on the unit.

Batteries (AAA type) : 2

HDMI cable : 1

TM-7102 HD-T2

Power cord : 1 or

Warranty card : 1

Do not install the unit :

Where it is subject to vibrations.

Where it is exposed to direct sunlight.

Where there is humidity.

Where the temperature is too high or too low.

Where there is no ventilation.

Moving the unit to a hot area from a cold one will cause condensation. Do not operate the unit for one or two hours or until it has dried completely.

The mains plug is used as the disconnect device.

8

The disconnect device shall remain readily operable.

If any accessories listed above are missing, contact the sales representative where you purchased this unit.

SATELLITE DISH

Your dish should be properly installed and azimuth and elevation must be precisely set up.

This unit is working with DiSEqC 1.2 on a compatible antenna positioner.

Ask your dealer for more information.

9

REAR PANEL

FRONT PANEL

1. Power :

To switch the receiver between “Standby” and “Power ON” modes.

2. Standby/Power Indicators :

Red in Standby mode and no light in Power-On mode.

3. Menu :

To enter or exit the Main Menu.

4. Select :

To open the Channel List in non-menu mode and to select/confirm an item in menu mode.

5-6. VOL( / ) :

To change the volume level in non-menu mode and to modify a setting in menu mode.

7-8. CH( / ) :

To change channels or to move Up/Down in the menus/application.

9. 2.5” & 3.5” S-ATA HDD(Max. 1TB)

10

No. Name Connector

1 RF OUT UHF 21-69 IEC 169-2 MALE

2 TV ANT IN IEC 169-2 FEMALE

3 USB

4 RS-232C

5 S/PDIF

USB A-type

DB-9

Fiber Optic

6 HDMI

7 LAN

HDMI

RJ-45

8 VCR/AUX SCART SCART

9 TV SCART

10 VIDEO

11 AUDIO L

12 AUDIO R

13 Y

14 Pb

15 Pr

16 LNB INPUT2

17 LNB INPUT1

18 LNB OUTPUT2

19 LNB OUTPUT1

20 DVB-T IN

21 LOOP OUT

22 VIDEO(option)

23 AUDIO(option)

24 AUDIO(option)

25 Y(option)

26 Cb(option)

27 Cr(option)

SCART

RCA cinch

RCA cinch

RCA cinch

RCA cinch

RCA cinch

RCA cinch

IEC 169-24 FEMALE

IEC 169-24 FEMALE

IEC 169-24 FEMALE

IEC 169-24 FEMALE

IEC 169-2 FEMALE

IEC 169-2 MALE

RCA cinch

RCA cinch

RCA cinch

RCA cinch

RCA cinch

RCA cinch

Function

Output to TV

Input from analog terrestrial antenna

USB 2.0

Low speed serial port

Digital audio output (Optical)

Digital Video/Audio Output

10/100Mbps Ethernet

CVBS Video Output

CVBS, RGB Video Input

Audio Output

CVBS, RGB Video Output, Audio Output

Composite video output

Left audio output

Right audio output

Component video output(Y)

Component video output(Pb)

Component video output(Pr)

IF input from LNB to digital tuner2

IF input from LNB to digital tuner1

IF loop-through output from digital tuner2

IF loop-through output from digital tuner1

Cable signal input to digital tuner.

Loop-through output from digital tuner.

Composite video input

Left audio input

Right audio input

Component video input (Y)

Component video input (Cb)

Component video input (Cr)

11

REMOTE CONTROL

TM-7102 HD-T2

1. POWER : To turn the receiver On/Off.

2. TV/RADIO : To switch between TV and Radio modes.

3. MUTE : To turn the sound On/Off.

4. TV/SAT : To switch the TV output source between the satellite input and the UHF/VHF antenna input.

5. MEDIA : To access media file playback menu.

6. SLEEP : To adjust the Sleep Timer.

7. PIP SWAP : To swap the PIP picture and the main picture.

8. PIP : To activate the Picture in Picture function.

9. PIP LIST : To display the PIP list.

10. EPG : To show the TV/Radio program guide.

11. SUBTITLE : To show the subtitle contents if subtitle is transmitted.

12. FAV : To show favorite list in the favorite group or to move to the next page.

13. A-Z : To sort channel list.

14. USB : To show the usb menu.

15. TEXT : To show the teletext contents if teletext is transmitted. Used for special functions in menu mode.

16. AUDIO : To show Multi-language audio track, the stereo-mono mode and subtitle information. Used for special functions in menu mode.

17. INFO : To show information about the current program. Press twice to show detailed information.

18. MENU : To enter or exit the main menu.

19. EXIT : To exit from the present menu and to go to the previous menu.

20-21. VOL UP & DOWN : To change the volume le vel in non-menu mode.

REMOTE CONTROL

TM-7102 HD-T2

12

22-23. UP & DOWN : To change channels in non menu mode and move the cursor up/down in menu mode.

24-25. LEFT & RIGHT : To change the volume level in non-menu mode.

26. OK : To show the Channel List in non-menu mode and select an item or confirm in menu mode.

27. SAT : To show Satellite list.

28. RECALL : To go to the previous channel menu.

Used for special functions in menu mode.

29. FILELIST : To display the filelist.

30. PLAY : Play Content.

31. STOP : Stop Playback.

32. RWD : Rewind a file / Arrow UP : To move to the previous page when many pages are available.(It is worked when in Menu List)

33. PAUSE : Pause playback.

34. FWD : Forward a file / Arrow Down : To move to the next page when many pages are available (It is worked when in Menu List).

35. ADVANCE : Go to live channel.

36. REC : Start recording.

37. SLOW : Playback in slow mode.

38. BOOKMARK : Set the bookmark position.

39. Color : To control brightness, contrast color of a picture (when in CVBS mode).

40. POS : To show the DiSEqC motor view control.

41. Color Key : To use special functions in the menu.

42. Numeric Keys (0 - 9) : To enter numerical settings(such as channel numbers) directly.

43. V.FORMAT : To change video output’s resolution.

44. Wide : To select a TV aspect ratio with Pan

Scan or Letter-Box(4:3) (Full screen or Pillar box(16:9).

13

FRONT DISPLAY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

16 17 19 18 20

13

14

15

16

9

10

11

12

7

8

5

6

3

4

1

2

17

18

19

20

21

22

14

22 21

Power On/Off mode.

It is displayed when a Satellite signal is present.

It is displayed when a channel is recording.

It is displayed when Time-Shift mode is enabled.

It is displayed when Time-Shift mode is enabled.

It is displayed when a Timer is set (in Standby mode).

It is displayed when the channel is HD.

It is displayed when a USB device is connected.

It is displayed when a channel is locked.

It is displayed when a channel is broadcasted in Dolby Digital Audio.

It is displayed when the audio is muted.

Feature not supported.

Feature not supported.

It is displayed when the MP3 player is enabled.

It is displayed when Loop mode is selected in the MP3 player.

It is displayed when you are in Radio mode.

It is displayed when you are in TV mode.

It is displayed when a Terrestrial signal is present.

It is displayed when in Playback mode in File List.

It is displayed when during Playback.

Displays the video output’s resolution.

It is displayed if the resolution Progressive or Interlaced.

CONNECTION WITH ANTENNA / TV SET / A/V SYSTEM

1. Connect the TV antenna to TV ANT IN.

2. Connect the Video and Audio of TV to the Video and Audio.

Connect Red and White connector to Audio R and Audio L, and Yellow into

Video port respectively.

3. Connect the Component Video of your TV to Component Video of best quality.

Connect the Y, Pb and Pr of your TV to Y, Pb and Pr respectively.

4. Connect your satellite dish.

RFIN

* Note : In some receivers TV scart is at the top or bottom of the rear of the receiver please follow the Writing of the TV then connect your scart cable for viewing.

15

3.5”, 2.5” SATA HDD ASSEMBLY INSTRUCTION

1. Turn off AC power.

2. Open the HDD SLOT cover.

3. Remove HDD Bracket .

Push no.1 and pull no 2.

4. Screw & assemble HDD and HDD

Bracket.

5. Assemble HDD Bracket at the HDD

SLOT.

* Note : For PVR Mode, Please go to Page 45

2.5inch HDD

& SCREW

3.5inch HDD

& SCREW

GETTING STARTED

Menu Language Setting

1. Turn on your TV and receiver.

2. The language selection menu will be displayed, select a language and press the

OK button on.

Country

1. Select a country and press the OK button on.

16 17

Tuner Setup

Satellite Setup

1. Press the

MENU button on the remote to display the main menu.

2. Use / and / button on the remote to move in the menu.

3. Select Satellite Setup, the Satellite Setup menu will appear.

4. Select each menu you want to edit/change.

- Satellite : Select any satellite by pressing / buttons on the remote.

- Tuner : Select Tuner1 / Tuner2 / Both(Tuner1) / Both(Tuner2).

- Transponder : Select the Transponder.

- LNB Power : Select LNB Power ON/OFF / 13V / 18V.

- LNB Type : Select your LNB Type Single / Universal / OCS.

- LNB Freq : Select LNB oscillator frequency.

18

1. Press the

MENU button on the remote to display the main menu and go to Installation

2. Select

Tuner Connection, the Tuner

Connection menu will appear.

3. Select your Dish setup:

Twin (using 2 satellite dishes or a Twin LNB or

Single or Loopthrough)

- 22KHz : Select ON/OFF of 0/22 KHz.

- DiSEqC 1.0 : Select DiSEqC 1.0 Port.

- DiSEqC 1.1 : Select DiSEqC 1.1 Port.

5. Scan : Press Red ( ) button on the remote to begin satellite search.

6. Rename : Press Green ( ) button on the remote to rename the selected satellite.

7.

Auto Navigation : Press Green ( navigation.

8.

Save : Press Yellow (

) button on the remote to begin auto

) button on the remote to save the selected satellite.

9. Delete : Press Blue ( ) button on the remote to de select the selected satellite.

Motorized Setting

1. Press the MENU button on the remote to display the main menu.

2. Use the / and / buttons on the remote to move in the menu.

3. Select

Motorized Setting, the Motorized Setting menu will appear.

4. Select each menu you want to edit / change.

- Satellite : Select any satellite by pressing / buttons on the remote.

- Tuner : Select Both(Tuner1) / Both(Tuner2).

- Transponder : Displays the current TP value of the selected satellite.

- DiSEqC Motor : Select DiSEqC Motor type OFF/1.2/USALS.

- Save : Press OK button on the remote to save.

5. Scan : Press Red ( ) button on the remote to begin satellite search.

6.

Auto Navigation : Press Green ( navigation.

) button on the remote to begin auto

19

DiSEqC 1.2 Setup

1. Select DiSEqC 1.2 on

DiSEqC Motor, the

DiSEqC 1.2 menu will appear.

- Satellite : Select any satellite by pressing / buttons.

- Tuner : Select Both(Tuner1) / Both(Tuner2).

- Transponder : Displays the current TP value of the selected satellite.

- DiSEqC Motor : Selected DiSEqC 1.2

- Move : Move the dish position to west/east by pressing / buttons.

- Move Fine : Move the dish position 1 step at a time to west/east by pressing / buttons.

- Motor Control : Control motor by press OK button on the remote.

Recalculate : Recalculate the position of all other saved satellites relative to the known position.

Reset System : Reset the position of all saved satellites.

Goto Reference : Move the dish to the 0 position.

Delete Limit : Delete east and west limit.

Enable Limit : Enable the saved east and west limit.

Set East Limit : Edit & Save east limit by pressing / or OK buttons.

Set West Limit : Edit & Save west limit by pressing / or

OK buttons.

- Go To : Go to the position of the saved satellite.

- Save : Save the current setting of DiSEqC 1.2 system.

2.

Scan : Press Red (

) button on the remote to begin satellite search.

3. Auto Navigation : Press Green ( navigation.

) button on the remote to begin auto

USALS System Setup

1. Select USALS on

DiSEqC Motor, the USALS menu will appear.

- Satellite : Select any satellite by pressing / buttons.

- Tuner : Select Both(Tuner1) / Both(Tuner2).

- Transponder : Display the current TP value of the selected satellite.

- DiSEqC Motor : Select DiSEqC Motor USALS.

- Move : Move the dish position to West/East by pressing / buttons.

- Motor Control : Control Motor by press OK button on the remote.

Goto Reference : Goto reference by pressing OK button.

Delete Limit : Delete limit by pressing OK button.

Enable Limit : Enable the saved east and west limit.

Set East Limit : Edit & Save east limit by pressing / or

OK buttons.

Set West Limit : Edit & Save west limit by pressing / or OK buttons.

- Sat Degree : Displays the current degree of the selected satellite.

Edit degree by pressing / buttons and numeric buttons.

Goto Reference : Move the dish to the 0 position.

Antenna Longitude : Edit antenna longitude by pressing / buttons and numeric buttons.

Antenna Latitude : Edit antenna latitude by pressing / buttons and numeric buttons.

- Go To : Save the current setting of USALS System.

2. Scan : Press Red ( ) button on the remote to begin satellite search.

3. Auto Navigation : Press Green ( ) button the remote to begin auto navigation.

* Note : When you change each parameter, you need to know exact parameter of the LNB to modify L.O(local oscillator) frequency.

20 21

DiSEqC Motor View Control

Auto Navigation

All the available channels/satellites can be searched in this menu. Select the satellite and save before Auto Search.

1. Press the

MENU button on the remote to display the main menu.

2. Use the /

and / buttons to move in the menu.

3. Select

Auto Navigation, Auto Navigation

menu will appear.

4. Select the satellites you want to search by pressing the OK button on the remote.

You can select more satellites by pressing the

/ buttons and

OK button on the remote.

- Search Type : Select the type of channel search you want by pressing / buttons

Free : To search Free To Air channels only.

TV : To search TV channels only.

on the remote.

All : To search all the Free To Air and scrambled channels, TV & Radio channels.

- Network Search : Select Network Search ON/OFF to find more transponders through NIT

Search.

22

1. Select

DiSEqC 1.2 or USALS in the Motorized

Setting menu.

2. In the viewing mode, Press

POS button on the remote to display

DiSEqC Motor View Control.

3. Press / buttons on the remote to move

DiSEqC Motor to get the best singal.

- Scan : Begin channel search of the selected satellite.

5.

Auto Navigation : Press Red (

) button on the remote.

6.

Auto Navigation Blind Search : Press Green(

) button on the remote and then begin Blind Search of the selected satellite.

* Note : Make sure that the signal level of the selected satellites is high by the signal quality bar. If the signal quality is lower than 50%, go gack to satellite Setup and check LNB DiSEqC Switching, ect.

Blind Search

1. Select the satellites you want to search by pressing the button on the remote.

2. For

Polarization, choose from ALL, V or H. For

Scan Mode choose either Fast or Detail.

3. Press the

OK button to start scanning.

4. Auto Navigation Blind Search : Press Red

( )button on the remote and then begin

Blind Search of all ‘selected’ satellite.

Advance Search

Te edit and search channels on newly launched satellites or not preprogrammed satellites in the list.

1. Press the MENU button to display the main memu.

2. Use /

and

/ buttons to move in the menu.

3. Select Advence Search, the Advence Search menu will appear.

4. Select each menu you want to edit/ change.

- Satellite : Select a satellite by pressing / buttons on the remote.

- Transponder : Displays the current Transponder list of the selected satellite.

- Symbol Rate : Displays the current symbol rate list of the selected transponder.

- Polarization : Select Horizontal/ Vertical.

- Search Type : Select All Channel/ FTA Only/ TV Only.

- Network Search : Select Network Search ON/OFF.

23

5. Scan : Press Red ( ) button on the remote to begin satellite search.

6.

Add TP : Press Green (

) button on the remote to add new transponders by using numeric buttons

0~9 and / buttons on the remote.

7.

Delete TP : Press Yellow (

) button on the remote to delete transponders.

Terrestrial Scan

Through this function, the receiver searches for all the available channels and saves them in memory.

- Auto Scan

1. When the Quality is at its highest level, press the

YELLOW(

) button on the remote control to start scanning for channels.

- Manual Scan

1. Select the channel number or frequency that you want to search by using the

UP/DOWN

buttons on the remote control, manually enter a frequency.

2. For

Bandwidth, choose either 7 MHz or 8MHz

For

Search Type, choose from : All Channel,

FTA Only or TV Only.

3. For Network Search, select ON to find the most channels available. The Strength and

Quality of the signal from the selected channel is shown by the Level and Quality indicators at the bottom of the screen.

4. Antenna Supply 5V : Select antenna booster power ON / OFF.

5. Press the OK button to start scanning.

PID Search

Edit the information of the current transponder

PID/Audio PID/PCR PID and search the satellite.

1. Press the

MENU button on the remote to display the main menu.

2. Use /

and

/ buttons on the remote to move in the menu.

3. Select PID Search, then the PID Search menu will be displayed.

- Satellite : Select a transponder which you want to search.

- Transponder : Displays the Transponders of the selected satellite.

- Symbol Rate : Displays the current symbol rate list of the selected transponder.

- Polarization : Select Vertical/ Horizontal.

- Video PID / Audio PID / PCR PID : Select and edit by using numeric buttons 0~9 and / buttons on the remote.

4. Scan : Press Red ( ) button on the remote to begin PID Search.

5.

Add TP : Press Green (

) button on the remote to edit transponder by using numeric buttons

0~9 and / buttons on the remote.

6.

Delete TP : Press Yellow ( transponder.

) button on the remote to delete the selected

* Note : Setup is now completed. If you cannot see programme after finishing these procedures, please contact your local dealer.

Fast Scan

1. For Provider choose either Canal Digitaal or

TV Vlaanderen.

2. For CHs Renumber select

ON/OFF

3. Press the Red( ) button.

24 25

Channel Selection

If you know the channel number, enter the channel number by using numeric buttons on the remote and wait 2 seconds until the channel changes.

If you know the channel name, press

OK

button on the remote, then the channel list will be displayed. Select the channel you want to watch by using / ,

OK buttons on the remote.

1. In the right side of screen, detailed information of the selected channel is displayed. (Satellite Name, TP and Channel Name)

2. You can navigate between channels with these buttons.

- / : Moves up/ down

- / or / / : Moves page up / page down.

- RED (

-

GREEN (

-

YELLOW (

- BLUE (

) : Displays all channels in current satellite.

) : Displays channels sorted by alphabetical order.

) : Displays channels sorted by transponder.

) : Displays channels sorted by FTA/ FTA + Scrambled / CAS.

3. When the selection bar is positioned on the channel you want to see, press OK on the remote.

Other Functions of the Remote Control

Volume Control

1. While you are watching a program me, press / buttons on the remote to control volume.

2. Press the

MUTE button to turn off the sound of the program me.

Press

MUTE button again to turn the sound On.

Channel Information

Displays the information of a program me by pressing INFO button on the remote.

26

TV/ RADIO switching

You can press this key to change from a TV channel to a Radio channel or vice versa.

RECALL

Press to return to the previous channel.

Audio

Press to adjust the subtitle and / or audio status of the current channel :

- Audio Mode : Select between, Stereo -> Mono-Left -> Mono-Right

- Audio Track : Select between tracks available in this program

- Audio Level : Select between, High -> Medium -> Low

* Note : These subtitle and audio paramenters are workable only when the desired channel supports these functions.

TEXT

The Teletext service is a text data service sometimes available from the Service

Provider.

SAT

Press the SAT button on the remote and select a satellite in the Satellite List.

FAV

Press FAV button on the remote to display a favorite channel list int the favorite group.

FREEZE

You can press this key to freeze the video. Press it again to resume the video.

GROUP

When watching TV or listening to Radio, you can press this button to view the list of satellite and / or favorite channel groups. Only registered satellites and favorite groups are displayed.

Multi Picture Display

Press the

MOSAIC button on the remote to display multi-picture mode.

You can select the numbers of multi-pictures.

eg. 1x2, 2x2, 2x3, 3x3

27

ZOOM

You can press to zoom in the video.

1. Press the PAUSE button and press ZOOM button You can zoom in sections of

Freezed Video.

2. While watching a program, press. You can zoom in sections of playing video.

3. To cancel the freeze status, please release the zoom status.

V.FORMAT

Press the V.FORMAT button to change the video resolution : 1080p > 1080i > 720p >

576p > 576i

WIDE

Press the WIDE button to change the TV’s Aspect Ratio :

- 4:3 : Pan-Scan or Letter-Box

- 16:9 : Full-Screen or Pillar-Box

SUBTITLE

You can press select the subtitle language of current channel.

SLEEP

You can set the receiver to turn off after a few minutes. Press the

SLEEP button to set a Sleep timer.

- To cancel a Sleep Timer, press the

SLEEP button until you set the time as “0 min”.

(Disable, 10, 20, 30, 60, 100, 120 Minutes)

COLOR Adjustment

Press the COLOR button on the remote to select Color Adjustment menu.

By using the / buttons on the remote, you can adjust the brightness, contrast and the color of picture.

28 29

SYSTEM SETTINGS

Time Setting

This sub-menu allows you to set your local time,wake up time, wake up channel and sleep time.

- GMT Usage : If you turn it ON, local time is determined by adjusting the differences from GMT

(Greenwich Meantime), according to your location.

- Current Date : If GMT Usage is ON, this date is determined by GMT. If GMT Usage is OFF, you can modify this by pressing the OK button on the remote. If you set OFF, the receiver doesn’t refer to GMT. Local time is determined by asjusting current date and current time.

- Current Time : If GMT Usage is ON, this time is determined by GMT.

If GMT Usage is OFF, you can modify this by pressing any NUMERIC button.

- Local Offset : If GMT Usage is ON, the Local time is GMT time + Local Offset.

- Summer Time : Select the period during which Summer Time is in force.

- Wake Up Mode : You can set the cycle of the wake up mode Off/Once/Daily.

- Wake Up Time : You can set wake up time by pressing any NUMERIC button.

- Wake Up Channel : You can set wake up channel by pressing the OK button on the remote.

- Sleep Mode : You can set the cycle of the sleep mode : Off/Once/Daily.

- Sleep Time : You can set a sleep time by pressing any NUMERIC button.

- Automatic Standby : Selects auto standby time (OFF/After 1~8Hour) After making your selection press (OK key) to confirm

- Timer Lead Time : Press (OK key) to set the Timer Lead In And Lead Out Time.

Advance Search

This submenu allows you to specify the audio/video output setting.

- Audio Language : Set the default audio language when selecting a channel.

- Subtitle Language : Set the default subtitle language.

- SCART : Select the SCART output.(CVBS/RGB)

- Screen Format : Select the screen format. (16:9 / 4:3)

30

- Display Format : Select the TV aspect ratio (Letter Box/Pan Scan, Full Screen/Pillar Box)

- RF Type : Select among supported PAL standards.(PAL B/G, PAL I, PAL D/K).

- RF Channel : Set the RF channel to which to display the audio and video signals on your TV set

(21 to 69); if you select 40, they will be displayed at channel 40 on your TV set.

- Video Format : Select the Scanning type (Interaced, Progressive)

- Digital Audio : Select the Audio output type (Dolby SPDIF / PCM / DOLBY HDMI)

- Radio Backpicture : Set the radio backpicture to On/Off

OSD Setting

This sub-menu allows you to set the menu language, OSD transparency, Information and volume timeout.

- Menu Language : Select the desired language of the menu.

- Transparency : Select OSD transparency of the menu. (1%~100%)

- Information Timeout : Select the display duration of the information banner

1 sec /

2 sec / 3 sec / 5 sec / 10 sec.

- Volume Timeout : Select the display duration of the volume box1 sec / 2 sec / 3 sec / 5 sec / 10 sec.

- Moving Display Message : Turn the DiSEqC moving message ON/OFF.

- Use Recall list : Store previous channels. If you press recall key on RCU then you will show recall list.

Front Display Setting

This sub-menu allows you to set the blue light & text moving on the front display window.

- Blue Light : Turn the blue light ON/OFF.

- Text Moving : Turn the text moving ON/OFF.

- Channel Number : Turn the channel number ON/OFF.

- Standby Mode : Select the standby Mode. (Normal /

Power Saving)

31

Password Setting

This sub-menu allows you to change the password option to access or lock menu entry and to change password.

- Receiver Lock : If you turn it ON, you will be asked to enter PIN code when power on.

- Remote / Ch / Install Lock :

If you turn it ON, you will be asked to enter PIN code when you go to Installation/Edit Channels and When you use Function keys on the remote.

- Lock Channel Confirm :

If you turn it ON, you wil be asked to enter PIN code when you switch to a locked channel.

- Age Limit : Prevents children or unauthorized people from watching the specific prgrams.

(Free / 8 above / 12 above / 15 above /

18 above)

- Current Password : Enter current password to change password.

- New Password : Enter the new password you want to change.

- Verify Password : Enter new password to confirm.

* Note : The default password is 0000.

Factory Reset

This sub-menu allows you to restore the factory setting if the users encounters a problem after changing any settings.

- Delete Radio Channels : Erase all radio channels.

- Delete Scramble Channels : Erase all scramble channels.

- Delete All Channels : Erase all channels and restore default setting.

- Factory Reset : Erase all channels and restore factory default setting.

32

IP Setting

- Save As Default Channel : Change the factory channels.

- Restore Default Channels : Restores 25 satellites and approx 1,500 channels pre-tuned.

If the Network supports DHCP, IP settings can be allocated automatically. If the Network does not support DHCP, the Addresses must enter manually (Static IP).

- DHCP Usage : On/Off to receive IP settings automatically

- IP Address : Here enter the IP address

- Subnet Mask : Here enter Subnet Mask Number from your Network

- Gateway : Here enter IP address of Gateway (e.g.

router)

- DNS : Here Enter IP address of main DNS Server

- Mac Address : Mac Address display

- Firmware update : Support download from a LAN.

1) BLUE button, appear input target IP address.

2) button to connect after input a target IP.

3) Choose a update software and (OK)button for downloading.

* Note : Have to run PC tool before connect PC.

33

Data Transfer

This sub-menu allows you to transfer the software of a receiver to another receiver.

- Firmware : Transfer the firmware of a receiver to another receiver.

- Games : Transfer the game data of a receiver to another receiver.

- All : Transfer all data (Firmware + Channel Data + Games) to another receiver.

EDIT CHANNELS

Set Favorites

This sub-menu allows you to set up favorite name and favorite lists.

You can choose TV or Radio channels by pressing the

TV/RADIO button. Supports is for 16 favorite groups.

1. Press the MENU button on the remote to display the main menu.

2. Use / and / button on the remote to move in the menu.

3. Select

Set Favorites, Select Favorite Group will appear.

4. Select a favorite group by pressing the / and OK buttons on the remote. The TV/Radio channel list will appear.

If you want to edit the favorite group name, press the

RED (

) button on the remote. A virtual keyboard will appear.

34

Rename CH / Edit PIDs

5. Set favorite channels by pressing the / and OK buttons on the remote. The selected channels will have a heart symbol on the right.

Press the

OK button on the remote again to remove the channel from a favorite group.

6. Press the

EXIT button on the remote to return to the previous menu.

This sub-menu allows you to rename the channels and input user PID.

You can switch between TV or Radio channels by pressing the TV/RADIO button on the remote.

1. Select

Rename CH / Edit Pids, the Rename CH

/ Edit PIDs menu will appear.

2. Press the

OK button on the channel that you want to edit.

3. Press the OK button on Edit Name to rename a channel. A virtual keyboard will appear.

Rename a channel by using the / , / and OK buttons on the remote. Press the EXIT button on the remote to exit.

4. You can edit a PID by using NUMERIC buttons on the remote.

* Note : The VIDEO PID, AUDIO PID and PCR PID are very important for optimal satellite signal reception.

35

Move Channels

This sub-menu allows you to move a channel in the list.

You can switch between TV or Radio channels by pressing the

TV/RADIO button.

1. Press the

OK button on Move Channels, the

Move Channels menu will appear.

2. Press the OK button to select the channel that you want to move, then arrow buttons will appear.

3. Use any NUMERIC buttons on the remote to move the selected channel or press

/ , OK buttons to move a channel.

4. Press the

EXIT button on the remote to return to the previous menu.

Lock Channels

This sub-menu allows you to lock channels.

Once the channel is locked, every time you want to watch the channel, you will have to enter the password.

* Note : If you set Lock Channel Confirm OFF, you will not be asked to enter a password even if a channel is locked.

1. Press the

OK button on Lock Channels, the

Lock Channels menu will appear.

2. Press the OK button to select the channel that you want to lock. A lock symbol will appear next to the channel’s name.

3. Press the OK button again to unlock a channel. The lock symbol will disappear.

4. Press the

EXIT button on the remote to return to the previous menu.

Skip Channels

This sub-menu allows you to skip channels.

Once a channel is skipped, every time you try to change the channel using / in the viewing mode, this channel will be skipped.

* Note : If you try to change the channel using NUMERIC button in viewing mode, you can watch this channel.

1. Press the

OK button on Skip Channels, the Skip

Channels menu will appear.

2. Press the OK button on the remote to select the channel that you want to skip. A skip symbol will appear.

3. Press the OK button on the remote again to cancel skip. The skip symbol will disappear.

4. Press the

EXIT button on the remote to return to the previous menu.

Delete Channels

This sub-menu allows you to delete channels.

* Note : If you delete a channel, you cannot watch this channel until you do a channel search again.

1. Press the OK button on Delete Channels, the

Delete Channels menu will appear.

2. Press the

OK button to select the channel that you want to delete. A symbol will appear.

3. Press the

OK button again to cancel delete.

The delete symbol will disappear.

4. Press the INFO button to delete all channels in the current list. You will be asked to enter a password.

5. Press the EXIT button to return to the previous menu.

36 37

Add Channels

1. Select the satellite and save in the Satellite setup before Add Channels.

- Satellite : Select a transponder which you want to search.

- Transponder : Display the Transponders of the selected satellite.

- Channel Name : Press OK button on the Channel

Name that you want to edit.

- Channel Type : Select TV/Radio.

- Video PID/Audio PID/PCR PID : Select and edit by using numeric buttons 0~9 and / buttons on the remote.

- Video Type : Select video type MPEG1/2 / H.264.

- Audio Type : Select audio type MPEG1/2 / HE-AAC / AC3 / MPEG4 / AAC / DD+.

2. Press Yellow ( )buttons on the remote to add channel.

AV In

This function allows you to view externel device output.

- AV Input : On/Off to add or delete a AV IN Channel.

If you selecto ON then you will see AV IN

Channel in channel list.

- Input Select : Select the video input type. (CVBS or

YPbPr)

38

EPG (ELECTRONIC PROGRAMME GUIDE)

EPG (Electronic Prograamme Guide)

This sub-menu allows you to view the electronic programme guide (if available).

1. Press the

EPG button on the remote, the EPG menu will appear.

2. Press the / to go to the previous/next

EPG.

3. Press the / or / buttons to change the channel.

4. Press the OK button on right side of screen

(Program List) and the selected program will be reserved ( Record OFF) in the Timer menu. Repeat for more programs.

5. Press the

REC button on right side of screen(Program List) and the selected program will be reserved(

Record ON) in the Timer menu. Repeat for more programs.

6. Press the

TV/Radio button on the remote to view TV/RADIO channel list.

7. Press the SAT/FAV button on the remote to view the SAT/FAV list.

8. Press the RED ( ) button on the remote, the Timer menu will appear.

9. Press the

INFO (

) button on the remote to EPG mode switching.

Timer

This sub-menu allows you to set the on/off time of your receiver.

1. Press the

RED (

) button in the

EPG menu, the

Timer menu will appear.

2. Press the / buttons to move to other menus.

3. Press the / buttons to change the selection.

- Timer No. 1-8 : Select the timer that you want to modify.

- State : Select the timer : Off/Once/Daily/Weekly.

- Date : Press the OK button to select the date. A virtual calendar will appear.

- Start Time : Enter the time by using the NUMERIC buttons on the remote for your receiver to turn On.

- End Time : Enter the time by using the NUMERIC buttons on the remote for your receiver to turn OFF.

39

- Channel : To view the channel list, press OK button on the remote.

- If you want to record a program in the right side of the screen, you can select a program by using

OK button. The selected program will be reserved.

- Record : Select the record ON / OFF.

- You can also see change the timer menu.

GAMES

Tetris

1. Press the OK button on Tetris, the game will load.

2. Select a skill by using the / buttons on the remote.

3. Press the

OK button to start a game or press the

EXIT button to return to the previous menu.

4. Press the OK button to rotate the block.

5. Press the / buttons to move the block.

6. Press the button to drop the block.

7. In the top right window, you can see the next block.

8. Press the EXIT button to quit a game.

Snake

Sokoban

To play Sokoban, you have to push the balls into their correct positions. The balls can only be pushed, not pulled. You have to be careful not to push them into a corner where you cannot get them out again. You can only push one ball at a time.

1. Press the

OK button on Sokoban, the Game will load.

2. Select a skill by using the / buttons on the remote.

40

3. Press the OK button to start a game or press the EXIT button to return to the previous menu.

4. Press the / or / buttons to move.

5. Press the

RED (

) button to undo previous move.You can only undo a step once at a time.

6. Press the GREEN ( game.

) button to restart the

7. Press the YELLOW ( ) / BLUE ( ) buttons to jump to the previous / next level. You can jump between completed levels.

8. Press the

EXIT button to quit a game.

1. Press the

OK button on Snake, the game will load.

2. You can select a skill using the / buttons on the remote.

3. Press the OK button to start a game or press the EXIT button the remote to return to the previous menu.

4. Press the / or / buttons to move.

5. If the snake takes BLUE blocks on the screen, the length will increase.

6. If the snake takes RED blocks on the screen, the length will decrease.

7. If the snake takes BLACK blocks, the game will end.

8. Press the

EXIT button to quit a game.

41

Calculator

This submenu allows you to use a calculator on the screen.

- You can switch between Hex (Hexadecimal) and

Dec (Decimal) basis for arithmetic with the

RED

( ) button of the remote control unit.

- Use the Numerical and the

/ and / buttons on the remote control unit.

USB Menu

This sub-menu allows you to playback MP3(music) and JPEG(picture) files and to download software and channel list by connecting your USB memory stick(USB flash drive) to the USB port in the receiver.

MP3 Menu

1. Select the MP3 file that you want to listen to by using the / ,

OK buttons in the file list. Press the

OK button select a file.

2. Press the

EXIT button to hide the file list.

You can then select an option using / ,

OK

buttons.

3. Use the VOL+/VOL- buttons to adjust the volume.

4. Press the

OK button on be displayed.

5. Press the

OK button on

.

. The MP3 file list will

The MP3 file information will be displayed.

- FILELIST : Open/Close the MP3 file list.

- INFO : Displays MP3 file information.

- YELLOW (

) : Choose:Hard Disk or USB device.

42

JPEG Menu

1. Use the / buttons to select a picture.

2. Press the

OK button to dispay the picture.

- RED (

) : Set the time interval between slides

(slideshow)

) : Slideshow

- GREEN (

- YELLOW (

) : Choose:Hard Disk or USB device

- FILELIST : Open/Close the JPEG file list

- BLUE (

) : Rotate the picture.

Data Transfer Menu (How to download Software from USB)

1. Select the software or channel list you want to download by using the / buttons in the list.

2. Press

OK button to start the software download.

- YELLOW (

) : Choose:Hard Disk or USB device

- RED : Upload the current CNDF(compressed dish and channel data file).

* Warning : Do not turn off your receiver whilst downloading.

Management

- Default Disk : Set the DVR disk.

- Disk Information : Choose:Hard Disk or USB device. You can view the information of the USB device (used size, total size, free size).

- Check Disk : Choose:Hard Disk or USB device. You can check the USB device.

- Format Disk : Formats the USB device or HDD.

43

44

- Testing USB Speed : USB speed test.

- Timeshift Rec Time : You can change default timeshift recording time.

- Auto Timeshift : Set automatic timeshift On/Off.

- HDD Sleep Time : HDD is change sleep mode after selected time.

Status of the CAM

1. Go to

Common Interface. Press OK on the CAM to see further information of the

CAM.

2. Proceed with further instructions displayed on the screen, then you can check further details depending on the CAM in use.

* Note : Further detailed information is not mentioned in this manual since the information depends on the type of CAM.

SYSTEM INFORMATION

You can check the current information about your receiver, such as the receiver model name, software version, hardware version, manufacturing date, etc.

* Note : This information is necessary when you want to download a new software or you need to repair the receiver.

COMMON INTERFACE

CAM Initializing

To watch scrambled channels, you will need a

Conditional Access Module (CAM) and Smart card which is specific to that CAM from the service provider (broadcaster).

* Note : Without a CAM and a smart card, you can watch only FreetoAir programmes.

1. Insert a CAM into a CAM slot in the receiver and a Smart card the CAM.

2. The message : CAM Initializing will appear.

CONDITIONAL ACCESS SYSTEM

Card Initializing

To Enjoy CONAX CAS7 scrambled channels, you will need a Smart Card from the service provider

(program distributor). If you are subscribing to services from more than one service provider, you will need a Smart Card from each one.

Since a Smart Card is connected to a single service provider, a limited range of channels will be available via it.

* Note : Without the Smart Card, you can watch only Free-To-Air programs.

1. Insert the Smart Card into the receiver’s slot designed for it.

2. The message ‘Smart Card Initializing’ will appear on the screen.

3. After the message

‘Smart Card Initializing’ has disappeared, you will be able to watch the channels offered by the service provider.

45

The Status of the Smart Card

1. You can access detailed information about the Smart Card using the / keys in the Main

Menu to select

‘CA’ and pressing / .

2. Proceed with further instructions displayed on the screen to check more detailed information depending on the Smart Card in use.

* Note : Futher detailed information is not mentioned in this manual since the information depends on the Smart Card in use.

PVR Mode via Internal HDD or USB

File List

File Playback

1. Press the

FILELIST button to open the file list.

Select the file you want to playback by using UP/DOWN & OK buttons.

2. Press the OK button. On the left side of screen, detailed information about the selected file will be displayed.

(Recorded Date/Time, Used size, Total Size)

- For Full Screen, press the

OK button once more and then following time-bar will appear.

46

Edit Menu

Enter the password. Press the

YELLOW button. A popup menu will appear.

Select the file that you want to edit, and set its parameters as desired.

1. Normal Mode : Press the

OK button on file that you want to see a preview.

2. Lock Mode : Press the OK button on the file that you want to lock/unlock.

3. Delete Mode : Press the OK button on the file that you want to delete.

4. Rename Mode : Press the

OK button on the file that you want to rename.

- RED : Choose from : File Mode <-> Dir Mode

- GREEN : Displays all sorted files. Choose from : Sort by name <-> Sort by time

* If you set ‘Channel Lock’ to OFF (refer to <Figure 6.2.4> security setting), you will not be asked to enter a password, even if the channel is locked.

Trick Mode

You can operate the Trick Mode while you are playing the files. This function is available in

Playback mode and Time-Shift mode.

PLAYBACK

This button will display a time-banner.

If you want to open the playlist while playing the file, press the PLAY button on the remote.

In This Mode, press the INFO button to show the trick-operation.

PAUSE

This button will pause the file until you playback again (press the PLAY button or

PAUSE button to resume watching).

ADVANCE

If Time-Shift mode is enabled, press the

ADVANCE button to go to the real time live broadcast.

47

FF (Fast Forward)

When playing the file, press the FF button to forward the program (adjust the playing speed).

- Choose from : x2, x4 and x8, x8 and x32

RWD (Rewind)

When playing the file, press the

RWD button to rewind the program (adjust the playing speed).

- Choose from : x2, x4 and x8, x8 and x32

Slow (1/2x, 1/4x)

When playing the file, press the SLOW button to slow the speed of the playback

(adjust the playing speed)

Bookmark

To create a bookmard/chapter at a specific time/place of the file.

- RED : Press the RED button and a red triangle will appear at that position.

If you want to delete the bookmarked position, press the RED button once more and the red triangle will disappear.

- GREEN : Press the GREEN button to go/jump to the previous bookmark position. Playback will start from this point.

- YELLOW : Press the YELLOW button to return to the next bookmark position.

Playback will start from this point.

* Note : The maximum number of bookmarks is 20 for each file.

File Edit

- BLUE : Press this button and edit(copy, cut) the file.

Press (OK key) button to select edit start position and one more (OK key) button to selectedit end position. Select cut or copy.

Jump

- Go to a desired position of the file by using the LEFT/RIGHT buttons.

- If you press this key continuously, you can go to the desired position faster.

48 49

Instant Recording

1. You can record the current channel you are watching instantly by using

REC

button.

If you then press the

PLAY button, a time-banner will be displayed.

2. Press the

REC button once more. The following picture shows that you can select an item when you record the current channel.

- Channel : Displays the current channel

- Name : Displays the current recording name

- Duration : You can change the duration of a recording’s time by using the LEFT /

RIGHT button. Current recorded time will appear.

* Note1 : DO NOT REMOVE the USB device while recording a program.

* Note2 : You can’t change to another channel while recording a program.

Record Stop

1. Press the

STOP button on the remote to stop the recording then Record Stop will be displayed.

2. Select the recording file by OK / STOP button.

3. Press EXIT button then selected recording is stopped.

Timer Recording

This function is available when a USB device is connected. You can choose a channel to record from the EPG Guide by using the

REC button.

(Refer to 6.4 EPG, 2) Timer)

Divx Play

Press (f1 key) button to display divx file list.

Press (OK key) button to play the selected file.

Time Shift

1. To pause and resume live TV channel, press the

PASUSE button. The default time for Time-Shift is 30 minutes.

2. To resume live TV channel, press the PLAY button.

3. The trick-mode operations are available. To return to the live broadcast, press the

ADVANCE button.

50 51

PIP

Start, Stop, Change PIP screen size

Press (pip key) on the remote to start PIP and “Sub Channel List” will displayed.

Select the channel using (OK key)

Press Exit to hide Sub Channel List.

Press (pip key) on the remote to change small PIP screen size.

Press (pip key) on the remote to stop PIP.

Sub channel list

Press (pip channel list key) on the remote to display Sub Channel List.

Press (exit key) on the remote to hide Sub Channel List.

Swap to Channel

Press (swap key) on the remote to swap main with sub channel.

1. Connect the null model cable to the RS-232C connection on the back of the receiver and to your PC.

2. Download the latest version of the TM Loader from the

Technomate web site (www.technomate.com).

3. Download the latest software (.STB) of your receiver

Ensure that the model number of the software is the same as the receiver you have.

4. Click on Browse in the TM Loader.

5. Select the file from where you saved it when you downloaded it from the Technomate website.

6. Turn ON the satellite receiver.

7. Click on Connect on TM Loader and then click Start to begin the software download.

8. The downloading status is displayed.

9. Once it displays 100% Finished (wait until it has completed erasing), the software download has finished.

10. When it completes the writing of the new software, disconnect the cable between the receiver and the PC.

A Factory Reset is rezuired.

11. Go to System Information on the main menu and make sure that you have correct software version.

52 53

Note. How to download / upload Channels

If you want to download / upload Channels, Click on

Channels in the TM loader, then select Download / Upload.

* Downloading Channels PC to TM-7100HD Series.

1. Click on

Download, and then Click on Browse in the TM Loader.

2. Select the file from where you saved it.

3. Turn on the satellite receiver.

4. Click on

Connect in the TM Loader and then click on Start to begin downloading

Channels PC to TM-7100HD Series.

5. Once it displays 100% fifnished, the Channel downloading has finished.

* Downloading Channels TM-7100HD Series to PC.

1. Click on

Upload, and then Click on Browse in the TM Loader.

2. Select the file and folder where you want to save in your PC.

3. Turn on the satellite receiver.

4. Click on

Connect in the TM Loader and then click on Start to begin uploading

Channels TM-7100HD to PC.

5. Once it displays 100% finished, the Channel uploading has finished...

* You can upload / download default channels maximu 1,500 TV & Radio channels.

If you want to add more than 1,500 channels, you will have to do a channel search/scan.

There may be various reasons for the abnormal operation of a set-top box. If it does not work properly, check if according to the procedures shown in the table below.

54 55

56

The receiver is on but I cannot get any Menu on the screen?

1) Check if the scart is connected,

2) Check the A/V settings on your television is correct,

3) Scart cable could be faulty there fore replace of in doubt.

I get the message ‘no signal’ displayed?

1) Check if the LNB cable is inserted into the IF INPUT,

2) Check if the LNB setup menu is correctly set.

3) Your satellite Dish may be out of alignment or your LNB may be is faulty.

4) Go to Easy installatin guide and start fresh,

5) Contact your dealer / installer.

I cannot access a particular channel I require?

You need to check the following :

1) Check if you a correct transponder.

Go to advance search, Turn on the Network Search, press red button to tune.

2) Make sure you have correct PID numbers.

b) if above dose not help go to www.lyngsat.com

www.kingofsat.net/en/prefs.php

Please contact your Supplier for further assistance.

How can I find out what software version I have?

Press Menu on the remote, Go to system information press ok, Full information is displayed.

I have lost my personal Lock Code setting, what do I do?

For security reason, please contact your dealer.

System capabilities satellite

LNB/Tuner input

Demodulator

Fully DVB compliant

Connector

Frequency range

Signal level

LNB supply

LNB switch control

DiSEqC

Front end

Symbol rate

IEC 169-24, female

950MHz ~ 2150MHz

-65dBm ~ -25dBm

DC 13/18V, max 400mA

22KHz

Ver 1.0/1.1/1.2/USALS Compatible

DVB-S/S2 QPSK, 8PSK

DVB-S : 2~45Msps

DVB-S2 : 10~30Msps(QPSK) 10~30Msps(8PSK)

TERRESTRIAL

System capabilities

Tuner

& Channel Decoder

SCPC and MCPC Capable

Spectral inversion

Input connector

Loop-through out

Frequency range

Input impedance

Signal level

IF Bandwidth

Waveform

Carrier Mode

Code Rate

System resource

Video decoder

Teletext

MPEG Audio

Serial data interface

Guard Interval

Processor

DDR SDRAM

FLASH

EEPROM

MPEG 2

Data Rate

Resolution

Video format

Aspec Ratio

DVB compliant

MPEG 1 layer 1 &2

Type

Sampling rates

Connector

Auto conversion

IEC 169-2, Female

IEC 169-2, Male

149 ~ 426 MHz, 434 ~ 858 MHz

75 Ohms Nominal

7,8MHz(-78dBm~-25dBm) switchable by software

7,8MHz

OFDM(DVB-T, DVB-T2)

DVB-T : 2k, 8k / DVB-T2 : 1k, 2k, 4k, 8k, 16k, 32k

DVB-T : 1/2, 2/3, 3/4, 5/6, 7/8

DVB-T2 : 1/2, 3/5, 2/3, 3/4, 4/5, 5/6

DVB-T : 1/4, 1/8, 1/16, 1/32

DVB-T2 : 1/4, 5/32, 1/8, 5/64, 1/16, 1/32, 1/64, 1/128

32bit processor (450MHz)

128Mbyte X 2

8Mbyte

256Kbit

MPEG-2, MPEG-4, H.264

up to 15M bits/s

1920 X 1080p/i, 1280 X 720p, 720 X 576p/i

PAL

4:3,16:9

Mono, Stereo, Joint Stereo

32, 44.1 and 48 KHz

9pin D-sub male, Max 115K bps

57

Remote control

USB

Power supply

Rear Panel connectors

Option

Physical

Specification

Code

Operating condition

USB Supply(Front/Rear)

Power consumption

Supply voltage

Supply frequency

TV SCART

VCR SCART

Video

Audio L/R

Component(Y/Pb/Pr)

Serial data

Digital tuner input X 2

Loop-through Digital tuner X 2

Terrestrial ant input

Terrestrial ant output

RF modulator input

RF modulator output

S/PDIF

HDMI

USB

LAN

Video input

Audio L/R input

Component input(Y/Pb/Pr)

Size (W X H X D)

Weight (Net)

NEC-IR up to 7 Meter

DC 5V Max 500mA max 60W

AC 100V ~ 250V

50Hz ~ 60Hz

CVBS, RGB Video output,

Loop-through RGB output

Audio Out

Video Output(CVBS)

Video Input(CVBS, RGB)

Audio Out(L, R)

1 X RCA cinch

2 X RCA cinch

3 X RCA cinch

9pin D-sub

IEC 169 - 24

IEC 169 - 24

IEC 169 - 2

IEC 169 - 2

IEC 169 - 2

IEC 169 - 2

Fiber Optic

1 X HDMI

USB A-type

RJ-45

1 X RCA cinch

2 X RCA cinch

3 X RCA cinch

390 X 73 X 283(mm)

3.5Kg

Disposal of Old Electrical & Electronic Equipment(Applicable in the European Union and other European Countries with separate collection systems)

This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipnent. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropirate waste handling of this product. The recycling of materials will help to conserve natural resources.

For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

58

60

INTRODUCTION

CONSIGNES ELEMENTAIRES DE SECURITE

POINTS DE CONTRÔLE AVANT L’EMPLOI

CONTRÔLES/FUNCTIONS

EQUIPMENT CONNEXION

OPERATION

EN CAS DE PROBLEME

59

59

61

62

66

66

77

Nous vous remercions de nous avoir fait confiance pour l’acquisition de votre

Terminal Numérique. Nous espérons qu’il vous donnera entière satisfaction durant de nombreuses années.

Ce produit étant un appareil de haute technologie, il est nécessaire d’en prendre soin et de respecter les consignes élémentaires de sécurité que nous vous communiquons ci-dessous.

Avant de commencer toute opération, bien lire le manuel.

Ne pas toucher le câble d’alimentation avec les mains humides, il pourrait causer un choc électrique.

Ne jamais ouvrir le récepteur. Ne pas toucher l’intérieur du récepteur, ceci peut causer un choc électrique.

Laisser libres tous les orifices de ventilation du récepteur.

Ne surchargez pas une prise murale, un cordon prolongateur ou un adaptateur car cela pourrait entraîner un incendie ou un choc électrique.

L’installation par un personnel qualifié est recommandée. Si la réception estinterrompue, contactez votre centre de service local.

Installez le récepteur horizontalement. Une installation non conforme peut endommager le système.

Ne pas déposer un objet lourd comme une télévision sur le récepteur.

Cela peut endommager le récepteur.

Le récepteur ne doit pas être exposé à des gouttes ou à des éclaboussures.

Aucun abjet contenant du liquide, comme une vase, ne doit être placé sur l’appareil.

61

62

Ne pas installez le récepteur :

A un endroit sujet à des vibrations.

A la lumière du soleil directe.

A l’humidité.

A une température trop haute ou trop basse.

ou il n y a aucune ventilation.

Déplacer le récepteur d’un endroit chaud à un endroit froid provoquerq de la condensation. N’allumez pas le récepteur durant une ou deux heures, jusqu’à qu’il soit complètement sec.

Accessoires

Manuel d’utilisation

Télécommande

Piles (type AAA)

HDMI câble

Si certains accessoires énumérés ci-dessus sont perdus, entrez en contact avec votre représentant afin d’en obtenir de nouveaux.

Antenne parabolique

Votre antenne devrait être installée et orientée correctement et l’élévation doit être ajustée avec précision.

Ce récepteur est conçu pour être compatible avec DiSEqC 1.2.

Demandez à votre revendeur pour plus d’informations.

63

Panneau Arrière

Panneau Frontal

1. Power :

To switch the receiver between “Standby” and “Power ON” modes.

2. Standby/Power Indicators :

Red in Standby mode and no light in Power-On mode.

3. Menu :

To enter or exit the Main Menu.

4. Select :

To open the Channel List in non-menu mode and to select/confirm an item in menu mode.

5-6. VOL( / ) :

To change the volume level in non-menu mode and to modify a setting in menu mode.

7-8. CH( / ) :

To change channels or to move Up/Down in the menus/application.

9. 2.5” & 3.5” S-ATA HDD(Max. 1TB)

64

No. Name Connector

1 RF OUT UHF 21-69 IEC 169-2 MALE

2 TV ANT IN

3 USB

4 RS-232C

IEC 169-2 FEMALE

USB A-type

DB-9

5 S/PDIF

6 HDMI

Fiber Optic

HDMI

7 LAN RJ-45

8 VCR/AUX SCART SCART

9 TV SCART

10 VIDEO

11 AUDIO L

12 AUDIO R

13 Y

14 Pb

15 Pr

16 LNB INPUT2

17 LNB INPUT1

18 LNB OUTPUT2

19 LNB OUTPUT1

20 DVB-T IN

21 LOOP OUT

22 VIDEO(option)

23 AUDIO(option)

24 AUDIO(option)

25 Y(option)

26 Cb(option)

27 Cr(option)

SCART

RCA cinch

RCA cinch

RCA cinch

RCA cinch

RCA cinch

RCA cinch

IEC 169-24 FEMALE

IEC 169-24 FEMALE

IEC 169-24 FEMALE

IEC 169-24 FEMALE

IEC 169-2 FEMALE

IEC 169-2 MALE

RCA cinch

RCA cinch

RCA cinch

RCA cinch

RCA cinch

RCA cinch

Function

Output to TV

Input from analog terrestrial antenna

USB 2.0

Low speed serial port

Digital audio output (Optical)

Digital Video/Audio Output

10/100Mbps Ethernet

CVBS Video Output

CVBS, RGB Video Input

Audio Output

CVBS, RGB Video Output, Audio Output

Composite video output

Left audio output

Right audio output

Component video output(Y)

Component video output(Pb)

Component video output(Pr)

IF input from LNB to digital tuner2

IF input from LNB to digital tuner1

IF loop-through output from digital tuner2

IF loop-through output from digital tuner1

Cable signal input to digital tuner.

Loop-through output from digital tuner.

Composite video input

Left audio input

Right audio input

Component video input (Y)

Component video input (Cb)

Component video input (Cr)

65

Télécommande

TM-7102 HD-T2

1. POWER : To turn the receiver On/Off.

2. TV/RADIO : To switch between TV and Radio modes.

3. MUTE : To turn the sound On/Off.

4. TV/SAT : To switch the TV output source between the satellite input and the UHF/VHF antenna input.

5. MEDIA : To access media file playback menu.

6. SLEEP : To adjust the Sleep Timer.

7. PIP SWAP : To swap the PIP picture and the main picture.

8. PIP : To activate the Picture in Picture function.

9. PIP LIST : To display the PIP list.

10. EPG : To show the TV/Radio program guide.

11. SUBTITLE : To show the subtitle contents if subtitle is transmitted.

12. FAV : To show favorite list in the favorite group or to move to the next page.

13. A-Z : To sort channel list.

14. USB : To show the usb menu.

15. TEXT : To show the teletext contents if teletext is transmitted. Used for special functions in menu mode.

16. AUDIO : To show Multi-language audio track, the stereo-mono mode and subtitle information. Used for special functions in menu mode.

17. INFO : To show information about the current program. Press twice to show detailed information.

18. MENU : To enter or exit the main menu.

19. EXIT : To exit from the present menu and to go to the previous menu.

20-21. VOL UP & DOWN : To change the volume le vel in non-menu mode.

Télécommande

TM-7102 HD-T2

66

22-23. UP & DOWN : To change channels in non menu mode and move the cursor up/down in menu mode.

24-25. LEFT & RIGHT : To change the volume level in non-menu mode.

26. OK : To show the Channel List in non-menu mode and select an item or confirm in menu mode.

27. SAT : To show Satellite list.

28. RECALL : To go to the previous channel menu.

Used for special functions in menu mode.

29. FILELIST : To display the filelist.

30. PLAY : Play Content.

31. STOP : Stop Playback.

32. RWD : Rewind a file / Arrow UP : To move to the previous page when many pages are available.(It is worked when in Menu List)

33. PAUSE : Pause playback.

34. FWD : Forward a file / Arrow Down : To move to the next page when many pages are available (It is worked when in Menu List).

35. ADVANCE : Go to live channel.

36. REC : Start recording.

37. SLOW : Playback in slow mode.

38. BOOKMARK : Set the bookmark position.

39. Color : To control brightness, contrast color of a picture (when in CVBS mode).

40. POS : To show the DiSEqC motor view control.

41. Color Key : To use special functions in the menu.

42. Numeric Keys (0 - 9) : To enter numerical settings(such as channel numbers) directly.

43. V.FORMAT : To change video output’s resolution.

44. Wide : To select a TV aspect ratio with Pan

Scan or Letter-Box(4:3) (Full screen or Pillar box(16:9).

67

Raccordement avec le système A/V / antenne / TV set

1. Raccordez TV ant IN de l’appareil à l’antenne TV.

2. Raccordez vidéo et Audio de l’appareil au TV et Vidéo de la TV.

Raccordez le connecteur rouge et blanc à audio R et audio L, et le jaune dans le port vidéo respectivement.

3. Raccordez votre antenne satellite.

Démarrage

Démarrez le récepteur en appuyant sur Power et procédez à l’installation du système comme suit :

Installation du menu langue

1. Allumez votre récepteur et TV.

2. Le menu langage apparaître.

Sélectionnez la langue et appuyez sur la touche OK de la télécommande pour procéder.

Installation Satellite

1. Appuyez sur la touche menu de la télécommande pour faire apparaître le menu.

2. Utilisez les touches / et / de la télécommande pour se déplacer dans le menu.

3. Sélectionnez Satellite Setup = installation satellite, alors le menu installation satellite s’affichera à l’écran.

68

Installation Satellite

4. Sélectionnez chaque menu que vous voulez éditer / changer.

Satellite : Sélectionnez le satellite souhaité à l’aide des touches / de la télécommande.

Tuner :

Transpondeur :

LNB Power : A l’aide des touches sélectionnez sur ON/OFF / 13V/18V.

LNB Type : Sélectionnez votre type de LNB sur soit Single/Universal/OCS.

22KHz : Sélectionnez sur ON/OFF ou 0/22 KHz.

DiSEqC 1.0 :

DiSEqC 1.1 :

5.

Scan : Appuyez sur la touche rouge de la télécommande pour commencer les recherches satellite.

6.

Rename=renommer : Appuyez sur la touche verte de la télécommande pour renommer le satellite sélectionné.

7.

Save=sauvegarder : Appuyez sur la touche jaune de la télécommande pour sauvegarder.

8.

Delete=supprimer : Appuyez sur la touche bleue de la télécommande pour supprimer le satellite sélectionné.

Installation motorisée

Appuyez sur la touche MENU de la télécommande pour afficher le menu principal.

1. Appuyez sur la touche MENU de la télécommande pour afficher le menu principal.

2. Utilisez les touches / et / de la télécommande pour déplacer dans le menu.

3. Sélectionnez installation motorisée, la fenêtre suivante apparaîtra.

4. Sélectionnez chaque menu que vous voulez éditer ou changer.

Tuner :

Satellite : Sélectionnez le satellite souhaité à l’aide des touches / de la télécommande.

Transpondeur : Montre la valeur courante de transpondeur du satellite choisi.

DiSEqC Motor : A l’’aide des touches, sélectionnez OFF 1.2 USALS.

Save=sauvegarder : Appuyez sur la touche OK de la télécommande pour sauvegarder.

5. Appuyez sur la touche rouge de le télécommande pour commencer les recherches.

6. Appuyez sur la touche verte de la télécommande pour renommer les satellites.

69

Recherche avancée

1. Appuyez sur la touche menu pour faire apparaître le menu principal.

2. Utilisez les touches / et / pour sélectionnez dans le menu.

3.Sélectionnez recherche avancée, ensuite la fenêtre suivante apparaîtra.

4. Sélectionnez chaque menu que vous voulez éditer ou changer.

Satellite : A l’aide des touches / de la télécommande sélectionnez le satellite souhaité.

Transpondeur : Montre la liste courante de transpondeur du satellite choisi.

Symbole rate : Montre la liste courante de symbole rate du satellite choisi.

Polarisation : Sélectionnez Horizontal ou Verticale.

Type de recherche : Sélectionnez toutes les chaînes ou seulement FTA ou seulement TV.

Recherche Network : Sélectionnez Network recherche sur ON ou OFF.

5. Scan : Appuyez sur la touche rouge de la télécommande pour commencer les recherches satellite.

6.

Add TP : Appuyez sur la touche «verte» de la télécommande pour ajouter ua nouveau transpondeur à l’aide des touches numériques 0-9 et les touches / de la télécommande.

7.

Delete TP : Appuyez sur la touche jaune de la télécommande pour supprimer le transpondeur.

Recherche PID

1. Appuyez sur la touche MENU de la télécommande pour afficher le menu principal.

2. Utilisez lez touches de la télécommande pour déplacer dans le menu.

3. Sélectionnez PID recherche, ensuite la fenêtre suivante apparaîtra.

Satellite : sélectionnez un transpondeur dans lequel vous souhaitez faire des recherches.

Transpoondeur : il montre le transpondeur d’un satellite sélectionné.

Symbol Rate : il montre la liste courante de symbole rate du satellite choisi.

Polarisation : Sélectionnez Vertical ou Horizontal.

Video PID / Audio PID / PCR PID : sélectionnez et éditez à l’aide des touches numériques 0-9 de la télécommande.

Add TP : appuyez sur la touche verte de la télécommande pour éditer le transpondeur à l’aide des touches numériques 0-9 et des touches / de la télécommande.

Delete TP : appuyez sur la touche jaune de la télécommande pour supprimer le transpondeur sélectionné.

70 71

Sélection de programme

Vous pouvez changer le programme courant par un autre programme.

Dans le cas où vous voulez sélectionnez une chaîne au hasard sans savoir le nom de celle-ci, vous pouvez naviguer entre les chaînes jusqu’à ce que vous trouviez ce que vous souhaitez.

Si vous connaissez le numéro de chaîne souhaitée, entrez le numéro et attendez 2 secondes jusqu’à ce que la chaîne change.

Si vous connaissez le nom de la chaîne souhaitée, appuyez sur OK et la liste de chaîne apparaîtra.

1. Dans l’écran droit, l’information détaillée de la chaîne sélectionnée apparaîtra.

2. Vous pouvez naviguer entre les chaînes avec ces touches:

/ : Déplacer vers le haut et vers le bas

/ : Déplacer de page en page

Rouge : Affichera toutes les chaînes

Vert : Affichera toutes les sortes de chaînes par ordre alphabétique

Jaune : Affichera toutes les chaînes par transpondeur

Bleu : Affichera

3. Lorsque la chaîne souhaitée est sur surbrillance, appuyez sur OK pour confirmer.

Autre Fonction de ra télécommande

Contrôle du volume

1. Lorsque vous regardez un programme, à l’aide des touches / vous pouvez contrôler le volume.

2. Lorsque c’est nécessaire, appuyez sur la touche Mute pour couper le son.

Appuyez à nouveau sur la touche mute pour remettre le son.

Information

L’information à propos d’un programme apparaîtra en utilisant la touche INFO de la télécommande.

72 73

EDIT CHANNELS

Installation des chaînes favorites

Ce sous-menu vous permet d’installer le nom préféré et les listes préférées comme vous le souhaitez.

En utilisant la touche TV/Radio, vous pouvez alterner entre les modes TV et Radio.

ll soutient 8 groupes favoris.

1. Appuyez sur la touche OK de pour installation favorite, ensuite « select

Favorite Group » = « sélection de groupe favoris » apparaîtra.

2. Sélectionnez un groupe favoris en utilisant les touches / et OK de la télécommande, la liste de chaînes TV

Radio apparaîtra. Si vous voluez changer le nom du groupe favoris, appuyez sur la touche Rouge et le tableau s’affichera.

3. Réglez les chaînes préférées en utilisant les touches / et OK de la télécommande Appuyez à nouveau sur la touche OK de la télécommande pour enlever le groupes favoris.

4. Appuyez sur la touche Exit de la télécommande pour retourner au menu principal.

74

Renommer ch / edit pids

Se sous-memu vous permet de renommer les chaînes et entrer l’utilisateur PID.

En utilisant la toche TV/Radio, vous pouvez alterner entre les modes TV/Radil.

Vous pouvez changer la liste de chaîne en utilisant les touches SAT/FAV de la télécommande.

1. Appuyez sur la touche OK pour renommer

Ch/Edit Peds, le menu suivant apparaîtra.

2. Appuyez sur la touche OK pour la chaîne que vous voulez éditer.

3. Appuyez sur la touche OK pour renommer une chaîne, le tableau suivant s’affichera.

Renommer une chaîne en utilisant les touches / et / , OK de la télécommande. Appuyez sur la touche

Exit de la télécommande pour quitter.

4. Vous pouvez éditer en utilisant les touches numériques de télécommande.

Déplacer les chaînes

Vous pouvez changer la liste de chaînes en utilisant lf touche GROUP.

1. Appuyez sur OK pour déplacer les chaînes.

Le menu suivant apparaîtra.

2. Appuyez sur OK pour sélectionnez la chaîne que vous voulez changer.

3. Appuyez sur les touches numériques pour déplacer la chaîne sélectionnée ou appuyez sur les touches / , OK pour déplacer une chaîne.

4. Appuyez sur la touche Exit de la télécommende pour retourner au menu précédent.

75

Chaîne verrouilée

Ce sous-menu vous permet de verrouiller les chaînes. Une fois que la chaîne est verrouillée, lorsque vous essayez de la regarder ; vous devez entrer le mot de passe.

En utilisant les touches TV/Radil vous pouvez alterner entre les modes TV ou Radio.

En utilisant les touches SAT/FAV vous pouvez changer la liste de chaîne.

* Note : si vous placez sur OFF la chaîne qui est verrouillée, alors vous ne devez plus entrer le mot de pass même si une chaîne est verrouillée.

1. Appuyez sur la touche OK pour la chaîne verrouillée. Le menu suivant apparaîtra.

2. Appuyez sur la touche OK pour sélectionner la chaîne que vous voulez verrouiller.

L’icône «verrouillé» s’affichera.

3. Appuyez à nouveau sur la touche OK pour déverrouiller une chaîne. L’icône

«verrouillé» disparaîtra.

4. Appuyez sur la touche Exit = quitter de la télécommande pour revenir au menu précédent.

Suppression de chaînes

Ce sous-menu vous permet de supprimer les chaînes. En utilisant les touches

TV/Radio, vous pouvez alterner entre les TV/Radio.

Vous pouvez changer le groupe de liste de chaîne à I’aide de la touche GROUP.

* Note : Attention! Si vous supprimer une chaîne, vous ne pourrez la regarder que si vous la recherchez à nouveau.

1. Appuyez sur OK pour «Suppression de chaîne». Le menu suivant s’affichera.

2. Appuyez sur la touche OK pour sélectionner la chaîne que vous souhaitez supprimer. L’icône «suppression» s’affichera.

3. Appuyez à nouveau sur la touche OK pour confirmer.

L’icône «suppression» disparaîtra.

4. Appuyez sur la touche INFO pour supprimer toutes les chaînes de la liste courante.

Vous serez invité à entrer le mot de passe.

5. Appuyez sur la touche Exit = Quitter pour revenir au menu précédent.

76 77

EPG (Electronic Program Guide)

EPG (le guide électronique des programmes)

Ce sous-menu vous permet de visualiser le guide électronique des programmes si il est disponible.

1. Appuyez sur la touche EPG de la télémmande, le menu Guide Eléctronique des programmes s’affichera.

2. Appuyez sur / pour voir le guide

électronique des programmes précédent ou suivant.

3. Appuyez sur les touches / ou / pour vous faire passer verticalement d’une chaîne à l’autre.

4. Appuyez sur la touche OK sur côté droit de l’écran (liste de programme) et le programme sélectionné sera réservé dans le menu Timer. Vous pouvez sélectionner autant de programmes que vous souhaitez.

5. Sélectionnez Programme TV/Radio à l’aide des touches TV/Radio de la télécommaned.

6. Sélectionnez SAT, liste Favori à l’aide des touches SAT, FAV de la télécommande.

7. Appuyez sur la touche Rouge de la télécommande, le menu Timer s’affichera.

Interface commune

CAM (modules d’accès conditionnel)

Pour regarder les chaînes cryptées, vous avez besoin de modules d’accès conditionnel (CAM) et/ou une carte à puce d’abonnement.

* Note : sans le module d’accès conditionnel et/ou la carte à puce, vous ne pouvez regarder que les services libre d’accès.

1. Insérez le module d’accès conditionnel dans l’une de fente du récepteur et une carte Smart dans le module.

2. Le message de « CAM Initializing » s’affichera à l’écran.

3. Après ce message, vous pouvez sélectionner la chaîne souhaitée.

Menu Minuterie

Ce sous-menu vous permet de programmer la mise en veille de votre récepteur.

1. Appuyez sur la touche rouge dans le menu guide, le menu Timer s’affichera.

2. Appuyez sur les touches / pour déplacer à d’autre menu.

3. Appuyez sur les touches / pour changer la sélection.

78 79

80

TM-6902HD-T2 Super

TM-7102HD-T2 Super