500-5, Sangdaewon-Dong, Sungnam-Shi, Kyeonggi-Do, Korea
Tel. 82-31-731-3600 ext. 210 / 211
Fax. 82-31-733-1155
Email. dgetrade@chol.com
http://www.teatime.or.kr
Dong Gu Electronics Co., Ltd.
Model : DSK-118-FA
1
Contents
Enable to make more tender and full bodied
espresso shot through hot water temperature
control quite freely.
Able to adjust Hot Water
Temperature at personal preference
Just pressing a button leads you to have a fresh
cup of coffee, fully automatically from bean to cup.
Fully Automatic Bean to Cup System
6
2
4
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
23
25
Personal cup facility instead using paper cup
is a precious part of protecting environment &
us.
Eco-Friendly Personal Cup
Facility
All process of bean to cup can be shown at
LCD screen, which allows the easy to use and
control.
Easy to use and control with LCD
Display
The easy to use MICOM Control System
enable to control any function conveniently.
Fully Automatic Micom System
1. Features / Contents
2. Precaution / Accessories
3. Description of Parts
4. How to fit and fill bean hopper
5. How to fit and fill topping canister
6. Installation and how to use - Pumped Type
7. Installation and how to use - Water Filter Connect Type
8. How to install Grinder
9. Brewer Reset / How to clean interior components / Cup Test
10. How to adjust taste / water volume
11. Drink Volume standard setting value
12. How to set price
13. How to adjust hot water temperature
14. Set sugar dose adjust-unit
15. Count Vended Cup
16. Personal Cup / One Time Personal Cup Facility
17. Vending Test
18. Bean Volume Test
19. How to set grinder
20. TroubleShooting Guide
21. How to clean
22. How to disassemble components
23. How to replace a fuse
5
1
3
Grind bean just before brewing allows to enjoy a
deep aroma and soft flavor.
Elegant European Espresso Machine
Features
Keys (2 pcs)
Drip Tray
Spare Fuse
(250v, 12A)
Waste Bin
Coin Box
User Manual
Water supply hose1(1pcs)
Water supply hose2(1pcs)
Drain hose(1pcs)
Canister
(3 pcs)
Clean Brush
(1 pcs)
Bean Hopper
Holder
Water Tank Cover O ring P34
(1pcs)
Bean Baffle
Plate
It might cause trouble.
2
When stop operating the machine for a long
time, unplug power to the machine
and empty bean hopper & canisters.
It might cause explosion, fire and injury
Do not keep inflammables near by machine
or put it into.
It might cause Electric Shock or Fire.
Be sure to call your local A/S service team to repair it
Stop operation when the plug and outlet is
damaged.
It might cause a burn or electric
shock.
Do not disassemble without a trainned
technician’s instruction. When the machine
is out of order, ask a trainned person from
an approved service agent to check
and repair.
Bean Hopper
connect pipe
Prohibited
Prohibited
Prohibited
Bean Hopper
DSK-118-FA Accessories
It might cause burst in winter when
keep it outside.
It might cause an electric leakage
and fire due to rain or snow.
At the place below 0 , be sure to
turn on machine.
Be sure to operate the machine for
indoor-use only at room temperature.
It might cause fire.
Do not connect electrical plug to
outlet when the outlet is loose
It might cause fire.
Do not connect multiple plugs of
appliances to one outlet at the same
time.
It might cause fire.
Be sure to use only grounded outlet when
connect the electrical plug to the outlet.
Do not ground the machine to the water
supply pipe.
Precaution
3
Canister
Inside
Front
Drip Tray
Waste Bin
Set Switch
Mixing Bowl
Brewer
Hot-Wire
Switch
Grinder
Bean Hopper
Cup outlet
Drink Button
Coin Slot
LCD Display
and Mode
Button
Bean Hopper
Description of parts
Power Cord
Drain hose
connect pipe
Water Supply
hose1
connect pipe
Exhaust Fan
Fuse
Power Switch
Cup Outlet
Box
Coin Box
Coin Sensor
Cup Container
Front Door Inside
Rear Side
6
5
4
3
2
1
Be sure to use roasted coffee bean only.
Ground bean might cause trouble.
Recommend to use the Arabica Coffee Bean for espresso.
Do not use low grade quality bean or over roasted bean.
It might cause trouble.
Fill the bean hopper with coffee bean. After fill out the
hopper, close the lid and lock.
Unlock the bean hopper lid with key.
When do not push the plate completely, the bean is not able to be supplied to
grinder, which cause trouble in vending a cup.
Fit the bean baffle plate into the bean hopper hole and
push the plate completely to make bean outlet open
The bean hopper can be removed during operating unless fix it.
Fit the bean hopper into its holder groove and then get the
connecting pipe fixed by turning clockwise.
The bean hopper connecting pipe fitting hole needs to be directed at front side.
Press bean hopper connecting pipe downward and fit it to
the grind level control ring.
Fit bean hopper holder groove into square hole on upside
of machine for fitting bean hopper.
How to fit and fill bean hopper
Installation and Precaution
4
5
Cream
1,080g
Chocolate
1,300g
1,850g
Sugar
5
Canister Capicity
Fit the bean hopper into panel then place the ingredient
dispense guide as shown in figure.
4
Be sure to check label on canister and panel if each canister is fitted to the correct
position .
Fit the fixing hole of canister into the rotation shaft correctly as
shown.
When filling up ingredients, be sure to rotate the ingredient dispense guide so that it
points up (loading position).
And slide canister backward and hold it carefully to prevent spilling.
When filling up ingredients, do not tamp the ingredient.
It might cause ingredient being solid and blocking ingredients outlet.
Fill canisters with toppings correctly and close canister lid.
Remove any wetness inside of canister perfectly to prevent ingredients from being
solid. Then put ingredients into canisters.
Fit the jut in bottom of canisters into panel hole correctly.
3
2
1
Lift the canister up slightly and pull front part of canister
toward user.
How to fit and fill topping canister
Installation and Precaution
1,200g
Bean
6
5
4
3
2
1
Insert coins and then press drink button to select.
When LCD screen displays "Enjoy a cup!", take out the cup.
(1) Machine works to supply water to water tank and heater tank.
(2) When finish heating, the machine is at standby condition.
Be sure to plug in its own grounded electrical outlet.
Turn on power switch at the right side of machine.
Refer to page 7~9 how to fill and fit & remove the bean hopper.
Refer to page 19 how to install grinder.
Fill each canister with Chocolate, Cream, Sugar and Bean.
After fill of the bean, install grinder.
Do not use unstandarized, Crushed and Wet Cup.
Do not press cups to fill too much. It might cause trouble in the cup sensor.
Fill 5 to 10 cups at a time by getting cup container full
cautiously not to damage cup sensor.
Remove any remains in the hose prior to connect.
It might cause trouble if the remains go through the machine.
Be sure to use filtered water and not recommend to use mineral water, if
possible.
3) Connect water supply hose 1 to its connect pipe and the
water supply hose 2 as shown in figure.
When fit it, circle slide cut part of the hose need to be directed at bottom.
Connect water supply hose
1) Unbend water supply hose 2 ( tefron hose ).
2) Fit the water supply hose 2 to water bottle cover with
1~2cm upward from top of the cover then put it into the
water supply bottle.
If it is not leveled, it might cause noise.
Space of 15cm from wall is required when install.
Clean the machine.
Place the machine on a flat level.
Installation - Pumped Type
Installation and Precaution
6
Fit the "-" fitting ( ) of the assembled water supply valve for
water filter to connecting pipe and fit the valve to hole using
enclosed fix screw.
Connect the electrical wire terminal and connector.
Assemble the lower pannel of rear side of machine, connect
it to water filter using "-" fitting ( ).
Fill the cup container with 5 to 10 cups cautiously not to
damage cup sensor.
2
3
4
7
7
6
5
Connect "-" fitting ( ), hose( ) and "-" fitting ( ) into water
supply valve( ) for water filter
as shown in figure, then connect enclosed electrical wire
terminal ( ) to any directions.
1
Insert coin and press drink button to select.
Take out the cups when LCD displays "enjoy a cup ! ".
1) Machine works to supply water to water tank and heater tank.
(2) When finish heating, the machine converts to standby condition.
Be sure to plug in its own grounded electrical outlet.
Turn on power switch at the right side of machine.
Refer to page 4~5 how to fill and fit & remove the bean hopper.
Refer to page 8 how to install grinder.
Fill each canister with Choco, Cream, Sugar and Bean.
After fill of the bean, install grinder.
Do not use unstandarized, Crushed and Wet Cup.
Do not tamp cups to fill too much. It might cause trouble in the cup sensor.
Unscrew the lower panel in rear lower side of machine.
Separate water supply pump fixed screw with connector.
Pull out the hose connected to the water supply pump.
The materials for connecting water filter are option.
Installation - Water Filter Connected Type
Installation and Precaution
2
4
6
5
As shown in figure, slide flapper(Blue part) to inside
direction and then press drink button to test bean volume
pushing the flapper till finish the 1st test.
3
Assemble the brewer mech. and
place set switch at "Lock".
Setting
Lock
As shown in figure, slide flapper(Blue part) to the outside
direction till over sill. Then have the bean volume test 2 or 3
times. Adjust the bean volume setting value at a range of
7g 10% using scale.
Press the mode button 8 times then
"Bean Volume Test" displayed on
LCD
Lock
Place Internal Set switch at Setting
1
Setting
Fill the bean hopper and grinder with roasted coffee bean.
How to install Grinder
Set Mode
Insert Coin
Refresh Time
With VENUSTA
Remove brewer
Press drink button
To test
Bean Volume Test
Press mode button
Installation and Precaution
8
1
2
2
1
9
After fill extra water tank with water when empty, press the reset
button long. Pump works to supply water to extra water tank and
process initialization.
A function to supply water to extra water tank.
Press the reset button once in left inside of the machine .
A function to return Brewer Mech to "standby
condition".
Use 6.5 oz or 7 oz of paper cup.
Be sure to use same size and same company’s cup only.
When using different size, it cause a problem in cup dispense.
LCD screen displays the test process and a cup will be
dispensed.
Fill cup container with paper cup then press the cup test
button inside of machine.
Cup Test
Be careful of the dripped hot water might cause burn.
Empty the drip tray when finish auto-clean.
Empty drip tray then locate it correctly
Press the button one time : clean brewer
Press the button two times : clean mixing bowl of sugar, cream
Press the button three times: clean mixing bowl of hot choco
Press the button long time once : clean the water circuit in turns
Press auto-clean button in left inside of machine.
Hot water rinse the mixing bowl and dropped to drip tray.
How to clean interior components automatically
Function2
Function1
Functions in condition of "Brewer Location Error" or "No Water". It will not work at "standby condition".
Reset Brewer & Water Supply
5
4
3
2
1
After finish adjustment, place Set
Switch at Lock .
Adjusted value will be stored with a
beep sound.
Pressing the personal cup button goes to next
step.
Adjust with the sugar +/- button in
front panel
Ex) when adjust espresso volume, press espresso
button. Able to set Ingredients and water
volume as per each drink selection button
Select drink to adjust volume
Press the Mode Button in Front
Panel one time.
Place Internal Set switch at Setting
Setting
Setting
Lock
Lock
Insert Coin
Refresh Time
With VENUSTA
Bean:3.5 ESP:50cc
Sugar:1.0 Water:2.5
Espresso
Bean:3.3 ESP:50cc
Sugar:1.0 Water:2.5
Espresso
Select drink
To adjust volume
Ingredient Time
Press mode button
Set Mode
10
How to adjust Taste / Water volume
11
8
5
3
1
1.0
2.5
25
Sugar
Water
Hotwater
50cc
1.0
2.0
4.0
ESP
Sugar
Milk
Water
0.7
1.5
2.5
0.7
2.0
Sugar
Milk
Water
Choc
Water
Water
8.0
setting
value
50cc
ESP
Hot water
3.3
Bean
setting
value
Cafe mocha
3.3
Bean
setting
value
50cc
ESP
Cafe latte
3.3
Bean
setting
value
Americano
-
Ingredient
volume
-
3.5g
-
7.5g
2g
-
7g
Ingredient
volume
-
10g
3g
-
7g
Ingredient
volume
-
-
3g
-
7g
Ingredient
volume
0.0 ~ 9.9sec
Range
0.0 ~ 7.0sec
0.0 ~ 7.0sec
0.0 ~ 7.0sec
0.0 ~ 7.0sec
0.0 ~ 7.0sec
0.0 ~ 70cc
0.0 ~ 7.0sec
Range
0.0 ~ 7.0sec
0.0 ~ 7.0sec
0.0 ~ 7.0sec
0.0 ~ 70cc
0.0 ~ 7.0sec
Range
0.0 ~ 70cc
0.0 ~ 7.0sec
0.0 ~ 7.0sec
0.0 ~ 70cc
0.0 ~ 7.0sec
Range
The standard setting value is based on 7 oz cup.
Please refer to page 10 and 19 when you need to adjust.
7
6
4
2
2.5
Water
Water
Milk
Water
Choc
Chocomilk
Water
Choc
4.0
2.0
1.0
50cc
3.3
3.5
2.0
4.5
3.0
setting
value
8.0
4.0
setting
value
Hot Choco
Water
Milk
Sugar
ESP
Bean
setting
value
Cappuccino
1.0
50cc
3.3
setting
value
Sugar
ESP
Bean
Espresso
-
10g
-
15g
Ingredient
volume
-
20g
Ingredient
volume
-
10g
3g
-
7g
Ingredient
volume
-
3g
-
7g
Ingredient
volume
0.0 ~ 8.0sec
0.0 ~ 7.0sec
0.0 ~ 8.0sec
0.0 ~ 7.0sec
Range
0.0 ~ 9.9sec
0.0 ~ 7.0sec
Range
0.0 ~ 7.0sec
0.0 ~ 7.0sec
0.0 ~ 7.0sec
0.0 ~ 70cc
0.0 ~ 7.0sec
Range
0.0 ~ 7.0sec
0.0 ~ 7.0sec
0.0 ~ 70cc
0.0 ~ 7.0sec
Range
Drink Volume standard setting value
5
4
3
2
1
LCD Screen will display the set price when
press the drink button at standby condition.
After finish setting, place Set
Switch at Lock .
Adjusted value will be stored with
a beep sound.
Use the sugar +/- button in front
panel to set price
Ex) When Select Espresso to set price
Select drink to adjust
Press Mode Button 2 times in front
panel.
Place Internal Set switch at Setting
How to set price
Setting
Setting
Lock
Lock
Insert Coin
Refresh Time
With VENUSTA
Set price with
Sugar +/- button
Espresso : 0100
Set price with
Sugar +/- button
Espresso : 0000
Select Drink
To adjust
Set Price
Press mode button
Set Mode
12
Set hot water temperature with the
sugar +/- button in front panel
Hot water Temperature Range : 60
to 99
2
3
13
4
Press Mode Button 3 times in front
panel.
1
After finish setting, place Set
Switch at Lock
Adjusted value will be stored with a
beep sound.
Ex) When select espresso to set temperature.
Place Internal Set switch at Setting
Setting
Setting
Lock
Lock
Incert Coin
Refresh Time
With VENUSTA
H.W.Temp: 99
Set HotWater Temp.
Set temperature
With the +/- button
H.W.Temp: 96
Set HotWater Temp.
Set temperature
With the +/- button
Press mode button
Set Mode
How to adjust hot water temperature
Setting
Lock
Lock
One time Sugar + / - function
After finish setting, place Set
Switch at Lock
Adjusted value will be stored with a
beep sound.
Sugar dose adjust range :0.1 to 0.5 sec
Set the adjust unit with the sugar +/button in front panel
Press Mode Button 4 times in front
panel.
Setting
Insert Coin
Refresh Time
With VENUSTA
Unit: 0.3sec
Set Sugar Dose Unit
Set adjust unit
With the +/- button
Unit: 0.1sec
Set Sugar Dose Unit
Set adjust unit
With the +/- button
Press mode button
Set Mode
When pass 5 seconds after pressing sugar +/- button,
convert to standby condition automatically.
1. Adjust sugar dose with sugar +/ - button
2. Press the drink button, sugar dose adjusted cup would be dispensed.
Adjust sugar dose.
14
Function to enable consumers to add or decrease sugar for personal preference, which
works just one time.
4
3
2
1
Place Internal Set switch at Setting
Set sugar dose adjust-unit
Press Mode Button 5 times in front
panel.
Press the drink button to count
1
2
3
Place Set Switch at Lock after
counting.
4
5
15
Press the personal cup button one
time.
Total paid/free cup number per drink
will be displayed on LCD screen.
Able to count the paid or the free cups as per
drink
ex) When you select Espresso
Place Internal Set switch at Setting
Setting
Setting
Lock
Lock
Set Mode
Insert Coin
Refresh Time
With VENUSTA
Total : 001,100
Paid : 001,000
Amount: 00013000
Free: 000,100
Free : 000,047
Amount : 00000000
Paid : 000,000
Espresso : 000,047
Select drink
To count
Count Vend Cup
Press mode button
How to count cups vended
After finish setting, place Set
Switch at Lock
Adjusted value will be stored with a
beep sound.
Auto-Dispense : press the sugar + button at the
personal cup mode
Personal Cup : press the sugar - button at autodispense mode
Use the sugar +/- button to set the
cup dispense
Press Mode Button 6 times in front
panel.
Setting
Setting
Lock
Lock
Insert Coin
Personal Cup Mode
Fit cup to outlet
Insert Coin
Refresh Time
With VENUSTA
Cup dispense: my cup
Set Cup Dispense
Set cup dispense
With the +/- button
Cup dispense: auto
Set Cup Dispense
Set cup dispense
With the +/- button
Press mode button
Set Mode
After 5 seconds from pressing the personal cup button, it converts to standby condition automatically.
1. Press Personal Cup Button in front panel.
2. Fit the personal Cup to the cup outlet and select drink.
3. After serving the cup, it converts to the Auto dispense mode.
A function to use personal cup only one time.
One Time Personal Cup Mode
4
3
2
1
Place Internal Set switch at Setting
Personal Cup Facility
16
Press Mode Button 7 times in front
panel.
Press drink button to test
After Test , place set switch at
Lock .
Adjusted value will be stored with a
beep sound.
1
2
3
4
17
Place Internal Set switch at Setting
Vending Test
Setting
Setting
Lock
Lock
Insert Coin
Refresh Time
With VENUSTA
Espresso Test
Select drink to test
Vend Test
Press mode button
Set Mode
5
4
3
2
1
After Test, place the set switch at
"Lock"
Check the bean volume dispensed.
Fit cup to cup outlet then press drink
button to test.
Press Mode Button 8 times in front
panel.
Place Internal Set switch at Setting
Setting
Setting
Bean Volume Test
Lock
Lock
Insert Coin
Refresh Time
With VENUSTA
Bean Volume Test
Remove brewer
Press drink button
To test
Bean Volume Test
Remove brewer
Press drink button
To test
Press mode button
Set Mode
18
Coarse
Screw the bean chute ( ) and follow the process of how to install grinder, page 8.
2
3
19
Remove bean grounds blocked in bean chute
outlet with enclosed small brush.
1
In case bean chute is blocked by bean grounds
Do not use the level between 1 and " " mark when you want a fine grind. It
might cause trouble or abrasion of grinder.
When you select a coarse grind, adjust bean volume properly because it might
cause excessive load.
- The grind level is varied from 1 to 7 level and
best at 2~4 level.
- When adjust the grind level by rotating the control
ring, recommend to select from 3 to 5 level, if
possible.
(refer to page 10~11, how to adjust bean volume)
Bean particle size
Unscrew the bean chute.
1
Able to adjust the level by rotating the grind level
control ring equipped in the upside of grinder.
How to adjust grind level
How to set grinder
Fine
error
lower thermistor
error
top thermistor
pls check
Heating Error
pls check
No Cup
pls check
No water
pls check
brewer location error
LCD Display
1. load cups in its container
1. check the stock of cup in its container
2. check connection of lower thermistor
1. check connection of top thermistor
2. check anti-overheating thermostat
1. check connection of heater tank electric
wire.
3. check 2 row cup valve
connect the thermistor
connector when disconnected
2. press top of the
anti-overheating thermostat
1. connect the wire well
3. replace the 2 row valve
2. replace cup with the fit size.
3. replace water pump
3. check water pump
2. check cup size
2. connect water supply hose
to water tank
20
1. fill water tank with water
1. check water level in water tank
2. check connection of water supply hose
Reassemble brewer referred
to page 23
Solution
1. check the brewer location state
Check Points
TroubleShooting Guide
21
Clean the cover and hose more one time in every 3
months.
Refer to ’how to disassemble’ at page 24.
Put and soak in water then wash out
ingredients powder and dust.
And remove moisture completely.
Exhaust Fan Cover and Hose
Be sure to unplug the machine prior to cleaning.
Remove ingredients powder, dust with
small brush then wipe with damp cloth.
Exhaust Fan
3. When do not operate machine for a long
term, empty and clean the waste bin.
It might cause trouble and unsanitary condition.
1. Empty drip tray and waste bin and soak
in water then wash out.
2. Need to check the waste bin more one
time in a day to prevent it from overflow
as the capacity of bin is for around 100
cups.
Drip Tray & Waste Bin
Clean more one time in a day
Refer to ’how to disassemble’ at page 23 .
Put the canister into water and soak
ingredients solid and stuck to canister in
water. Then wash out with a soft sponge.
Mixing Bowl
Assemble after remove moisture completely.
Clean canisters more one time in a month.
Put the canister into water and soak ingredients
solid and stuck to canister in water.
Then wash out with a soft sponge.
Ingredient(topping) Canister
How to clean and schedule
Prohibited
22
Do not use volatile cleaning agents, thinner, benzene,
solvent, etc when clean. It might cause trouble and injury.
Needs to check defects of O-Ring in upper piston and upper screen filter in every
six months.
When the O-Ring and filter is defected, needs to replace with new one.
Check point in every six months.
Needs to check lubricating state of internal movement part once in a month.
When the lubricating state is not good, spread silicone grease on , in below
figure.
2. Monthly Check
Clean the filter part completely with brush to remove any
impurities.
Be sure to clean when over 100 cups are vended in a day.
Rinse it with hot water well.
Refer to page 23, how to disassemble.
1. When upper piston filter is blocked by remaining coffee grounds,
which cause trouble in brewing and vending, needs to clean it
more one time in two days.
Recommend to clean brewer mech frequently for sanitary.
Brewer Mech
Remove remaining moisture completely.
Clean cup station more one time in a day.
Wipe with damp cloth
Cup Station
23
Remove canister
then pull the A
part up, as below
figure.
2
Pull B part up, as
below figure.
1
1
2
turn brewer handle
anti-clockwise and
arrange it in original
position.
2
3
Turn the lock lever
anti-clockwise
direction.
3
Push it straight to get lower
both side parts of brewer
mech. positioned well
between both edges of lock
lever bracket.
fit the brewer into
hole of bean motor
then push it straight.
3
Pull out the mixer
clockwise
direction, as below
figure.
Pull the lock lever to left
direction and get it open.
How to assemble Brewer Mech.
Pull out the brewer hose
How to remove Brewer Mech
1
How to remove mixing bowl
Disconect hose by
pulling out the upper part
of the hose connected to
ingredient dispense
holder.
4
Push the lock lever
completely and
connect hose.
Turn the lock lever anticlockwise direction and pull
out toward user.
Connect
Hose
4
How to disassemble components
Be sure to turn off machine before remove the cover.
It might cause injury
1. Turn off machine
2. Unscrew the exhaust fan cover
How to remove the exhaust fan cover
24
25
4
Dimension
Weight
700 (h) x 430 (w) x 530 (d)
36Kg
MICOM
LCD
Display
Control System
3( Chocolate, Cream, Sugar) / 1 Bean Hopper
210mL
Water Tank Capacity
)
Canisters
550mL
Bi-Metal Type ( works at 125
1,450W
220V / 60Hz
DSK-118-FA
Boiler Capacity
Thermostat
Close the fuse holder
2
Using unstandardized fuse might cause fire.
Power Consumption
Electricity
Model
Unscrew the fuse holder.
Be sure to replace the broken fuse with standard new fuse (250V-12 A)
Replace the broken fuse with new one.
Specification
3
1
Be sure to unplug power cord when change
fuse.
Change current fuse
Fuse is a overcurrent protection device.
Replace with standard new fuse ( 250V - 12A ), when fuse is broken
How to change fuse
MEMO
26
Download PDF