BJ193PQ Three-phase Combined Power Meter User Manual Version

Blue Jay Technology Co.,Ltd
Product Manual
BJ193PQ
Three-phase Combined Power Meter
User Manual
Version:
:1.1
Tel:+0086-023-67636974
Fax:+0086-023-67636974
Add: Redstone Road 2# 17-3,Jiangbei District , 400020, Chongqing, P.R.China
Email:tech@cqbluejay.com
Blue Jay Technology Co.,Ltd
Product Manual
Read me
When you use BJ193-X series Digital Meter, be sure to carefully read this user manual,
and be able to fully understand the implications, the correct guidance of operations in
accordance with user manual, which will help you make better use BJ193 series Multifunction
Power Meter, and help to solve the various problems at the scene.
1. Before the meter turning on the power supply, be sure that the power supply within the
provisions of the instrument;
2. When installation, the current input terminal must non-open, voltage input terminals must
Non-short circuit;
3. Communication terminal (RS232 or RS485) is strictly prohibited to impose high pressure;
4. Be sure the instrument wiring consistent with the internal system settings;
5. When communicating with the PC, instrument communication parameters must be consistent with
the PC.
● Please read carefully before using this user manual
● Please save this document
Tel:+0086-023-86850812
Email:tech@cqbluejay.com
Fax:+0086-023-67636974
Add: Building 13, 2-8, Jialing third village Pioneer Park, Jiangbei District, Chongqing, P.R.China
-1-
Blue Jay Technology Co.,Ltd
Product Manual
Directory
CONTENTS
Page
1. Summarize -------------------------------------------------------------------------------------
1
2. Specifications-------------------------------------------------------------------------------------
1
3. Installation and Start-up -----------------------------------------------------------------------
5
3.1.- Installation
------------------------------------------------------------------------------
5
3.2.- Connection terminal --------------------------------------------------------------------
6
4. Screen Display --------------------------------------------------------------------------------
8
4.1.- Panel diagram
-------------------------------------------------------------------------
8
4.2.- Display Summary -----------------------------------------------------------------------
8
5. Operating Mode -------------------------------------------------------------------------------
9
6. Setup Procedure --------------------------------------------------------------------------------
10
7. Safety Considerations -----------------------------------------------------------------------
11
8. Maintenance -----------------------------------------------------------------------------------
11
9. Technical Service -----------------------------------------------------------------------------
11
Tel:+0086-023-86850812
Email:tech@cqbluejay.com
Fax:+0086-023-67636974
Add: Building 13, 2-8, Jialing third village Pioneer Park, Jiangbei District, Chongqing, P.R.China
-2-
Blue Jay Technology Co.,Ltd
Product Manual
1.- SUMMARIZE
BJ193-X series Digital Meter is used for power quality monitoring, factory automation and building
automation.
These series can measure the power parameters in power grid:
Current,
Voltage,
Frequency,
Active power,
Reactive power,
Apparent power,
Energy,
Power factor,
It can replace many of a traditional analog measurement instruments, improve system accuracy
and reliability.
2. - SPECIFICATIONS
1.- Reference standard:
Basic electricity: GB/T13850-1998 (IEC688-1992)
Active power : GB/T17215-2002 (IEC61036:2000)
Reactive power : GB/T17882-1999 (IEC61268:1995)
2- Accuracy standards
Parameter
Accuracy
Three phase
Active Power
0.5%fs
W
Reactive Power
0.5%fs
Var
Power Factor
0.5%fs
PF
3.- Input
Voltage: Rated 100/400V
Current: Rated 5A (optional 1A)
Frequency: 45-65Hz
4.- Load
Voltage: <0.5VA / phase (rated 220V)
Current: <0.5VA / phase (rated 5A)
Tel:+0086-023-86850812
Email:tech@cqbluejay.com
Fax:+0086-023-67636974
Add: Building 13, 2-8, Jialing third village Pioneer Park, Jiangbei District, Chongqing, P.R.China
-3-
Blue Jay Technology Co.,Ltd
Product Manual
5.- Overload
Current: 2 times rated continuous; 10 seconds for 10 times the rated
Voltage: 2 times the rated continuous; 10 seconds for 600V
6.- Dielectric strength
IEC 688 / IEC 255-3 (1989)
2kV AC RMS 1 minute, between input / output / case / power supply
7.- EMC Test
standard
Electrostatic discharge immunity
test:
IEC-61000-4-2
level 4
Electrical fast transient burst
immunity test
Surge (Shock) immunity test
8KV
IEC61000-4-4
level 3
Input 1kV; Power supply 2kV
IEC61000-4-5
level 4
common mode test voltage
4kV
8.- Work environment
Temperature: -20 ~ +60 (-4
~ 140 )
Humidity: RH 20% 95% No condensation
℃ ℃ ℉
~ (
Test voltage
℉
)
9.- Protection
Panel: IP40
10.- Storage Conditions
Temperature: -25
+70 (-13
Humidity: RH 20% 95%
℃~ ℃ ℉ ~ 158℉)
~
11.- Power Supply
AC /DC 80-270V
Maximum power consumption 3W
12.- Dimensions
L × W × H =96x96x71mm (3.78x3.78x2.80 inch)
13.- Installation hole size
L × W =(91+0.8)mm×(91+0.8)mm [(3.58+0.032)inch x (3.58+0.032)inch]
Tel:+0086-023-86850812
Email:tech@cqbluejay.com
Fax:+0086-023-67636974
Add: Building 13, 2-8, Jialing third village Pioneer Park, Jiangbei District, Chongqing, P.R.China
-4-
Blue Jay Technology Co.,Ltd
Product Manual
3.- INSTALLATION AND START-UP
The manual you hold in your hands contains information and warnings that the user
should respect in order to guarantee a proper operation of all the instrument functions
and keep its safety conditions. The instrument must not be powered and used until its
definitive assembly on the cabinet’s door.
Whether the instrument is not used as manufacturer’s specifications, the protection of the
instrument can be damaged.
When any protection failure is suspected to exist (for example, it presents external visible
damages),the instrument must be immediately powered off. In this case contact a qualified
service representative.
3.1.- Installation
Mounting
Instrument is to be mounted on panel (cut-out 91+0.8 x 91+0.8 mm). All connections keep
inside the cabinet.
Note that with the instrument powered on, the terminals could be dangerous to touching
and cover opening actions or elements removal may allow accessing dangerous parts.
Therefore, the instrument must not be used until this is completely installed.
Tel:+0086-023-86850812
Email:tech@cqbluejay.com
Fax:+0086-023-67636974
Add: Building 13, 2-8, Jialing third village Pioneer Park, Jiangbei District, Chongqing, P.R.China
-5-
Blue Jay Technology Co.,Ltd
Product Manual
Notes:
Auxiliary power:
BJ193X Series Power Meter with universal (AC / DC) power input, if not for a special statement, we
provide the 220VAC/DC or 110VAC/DC power interface for standard products Instruments limit
work power supply : AC / DC :80-270V, please ensure that the auxiliary power can match for
BJ193-X series meter to prevent damage to the product.
A. Suggest install 1A fuse in the fire line side.
B. For the areas with poor power quality, suggest install lightning surge suppressor and rapid burst
suppressor to prevent lightning strikes
3.2.- Connection terminal and drawing for BJ193P-9X4 (see label on the rear part)
Terminal description
1. *Supply voltage input: 0 V
2. *Supply voltage input:85~265 Va.c.
4. Current A-phase - S1 input
5. Current A-phase - S2 input
6. Current B-phase - S1 input
7. Current B-phase - S2 input
8. Current C-phase - S1 input
9. Current C-phase - S2 input
11. Voltage A-phase input
12. Voltage B-phase input
13. Voltage C-phase input
14. Neutral Voltage input
Tel:+0086-023-86850812
Email:tech@cqbluejay.com
Fax:+0086-023-67636974
Add: Building 13, 2-8, Jialing third village Pioneer Park, Jiangbei District, Chongqing, P.R.China
-6-
Blue Jay Technology Co.,Ltd
Product Manual
IMPORTANT REMARK!
If power = -0.01 is shown for any of the phases and voltage and current are not zero for this phase,
check out following points:
- Assure that A,B,C phases coincide in voltage and current.
- Correct polarity? Reverse the current transformer placed at this phase.
Tel:+0086-023-86850812
Email:tech@cqbluejay.com
Fax:+0086-023-67636974
Add: Building 13, 2-8, Jialing third village Pioneer Park, Jiangbei District, Chongqing, P.R.China
-7-
Blue Jay Technology Co.,Ltd
Product Manual
4. Screen display
4.1.- Panel diagram
4.2.- Display Summary
No.
Display
Explanation
1
Digital display module
Three lines 4 digital LED
measurement power data
show
2
Indicator of the data Unit
"K" means thousand; "M" means million
3*
Enter key
For menu selection and confirmation
4*
Menu key
Used to open the menu and return to
previous menu
5*
Up and Down key
Set the programming value
Note: Please see detail instructions of “*” items at “OPERATION MODE”
Tel:+0086-023-86850812
Email:tech@cqbluejay.com
Fax:+0086-023-67636974
Add: Building 13, 2-8, Jialing third village Pioneer Park, Jiangbei District, Chongqing, P.R.China
-8-
Blue Jay Technology Co.,Ltd
Product Manual
5.- OPERATION MODE
The instrument has three displays. Every led will be on according to the parameter presently
shown in screen.
When the 193P-9X4 is powered up, the entire symbol will be on, and the meter starts to self- test.
After some seconds, the meter is ready for operation and shows one of the available screens.
Parameters on display can be switched by pressing key
screen at any moment
When the key
or
.
LED shown on
is pressed, the screen CURRENT values of each phase are now showing.
Pressing again the key
, the screen will show the following parameters successively.
In setting menu, pressing key
Pressing
can move the setting cursor to left;
can enter the number 0 ~ 9.
This key named "SET" key, pressing it can open the programming menu and return to previous
menu.
This key named “Enter” key, pressing this key you can exit it with saving any modification that
you might have done, in menu operation press “Enter” key, and user can go to the next menu.
Note:
Press key
main screen:
or
in normal standby status, and the meter will show different data in
In the menu set mode, when changes the parameter and exit setting, the meter will ask to
"SAVE", press
exit without saving
press
save and exit.
Tel:+0086-023-86850812
Email:tech@cqbluejay.com
Fax:+0086-023-67636974
Add: Building 13, 2-8, Jialing third village Pioneer Park, Jiangbei District, Chongqing, P.R.China
-9-
Blue Jay Technology Co.,Ltd
Product Manual
6.- SETUP PROCEDURE
The SETUP procedure of the BJ193-X is performed by means of several SETUP options.
Once into the SETUP, use the keyboard to select different options and enter required variables:
Note:
The procedure above is for reference, not all series have the step 3 (communication preference),
only the K series have this step. If you want the X series and D series have this function,
Menu are not specified in the manual would be invalid, do any modify will be no change. If doubt
about the please contact the Technical Service. tech@cqbluejay.com
Tel:+0086-023-86850812
Email:tech@cqbluejay.com
Fax:+0086-023-67636974
Add: Building 13, 2-8, Jialing third village Pioneer Park, Jiangbei District, Chongqing, P.R.China
- 10 -
Blue Jay Technology Co.,Ltd
Product Manual
7.- SAFETY CONSIDERATIONS
All installation specification described at the previous chapters named :
INSTALLATION AND STARTUP, INSTALLATION MODES and SPECIFICATIONS.
Note that with the instrument powered on, the terminals could be dangerous to
touching and cover opening actions or elements removal may allow accessing
dangerous parts. This instrument is factory-shipped at proper operation condition.
8.- MAINTENANCE
The 193X does not require any special maintenance. No adjustment, maintenance or repairing
action should be done when the instrument open and powered on, should those actions are essential,
high-qualified operators must perform them.
Before any adjustment, replacement, maintenance or repairing operation is carried out, the
instrument must be disconnected from any power supply source.
When any protection failure is suspected to exist, the instrument must be immediately put our of
service. The instrument’s design allows a quick replacement in case of any failure.
9.- TECHNICAL SERVICE
For any inquiry about the instrument performance or whether any failure
happens, contact to Blue Jay’s technical service.
Blue Jay - After-sales service
Building 13, 2-8, Jialing third village Pioneer Park,
Jiangbei District , 400020 Chongqing
Tel - + 0086 023 86850812
Fax - + 0086 023 67636974
E-mail : tech@cqbluejay.com
Tel:+0086-023-86850812
Email:tech@cqbluejay.com
Fax:+0086-023-67636974
Add: Building 13, 2-8, Jialing third village Pioneer Park, Jiangbei District, Chongqing, P.R.China
- 11 -
Download PDF