INSPECTION TOOL
WiFi Inspection Camera
Model: GD8722/GD8723/GD8725/GD8726/GD8727/GD8729
EU Environmental Protection
INSPECTION TOOL
Waste electrical products should
not be disposed of with household
waste. Please recycle where
facilities exist. Check with your
local authority or retailer for
recycling advice.
Model: GD8722/GD8723/GD8725/GD8726/GD8727/GD8729
Version 1.0
Please read this user manual carefully before using this product.
Failure to understand operation procedures may result in injury.
CONTENTS
General Safety Information
02
Welcome
03
Features
03
Packing List
03
Structure
04
Installation
04
Operation
06
Basic Operation
06
Operations for iOS Apple system client
07
07
WiFi Connection
08
Device Operation
09
Important Notes
11
Installation APP software
14
14
Device Operation
15
Important Notes
18
FCC Information
* GD8722 = GT8723(handle) + GT4802(camera)
GD8725 = GT8723(handle) + GT4805(camera)
GD8727 = GT8723(handle) + GT4807(camera)
01
14
WiFi Connection
Specifications
WARNING! Read and understand all instructions. Failure to follow all instructions listed below may
result in electric shock, fire and/or serious personal injury.
SAVE THESE INSTRUCTIONS!
※
※
※
Installation APP software
Operations for Android system client
GENERAL SAFETY INFORMATION
※
※
※
※
※
※
※
※
※
※
※
Prevent object and liquid entry. Never spill liquid of any kind on the video display unit. Liquid
increases the risk of electrical shock and damage to the product.
The unit is not shock-resistant. Do not use Explorer Standard as a hammer and avoid high
impact resultant from things such as dropping the unit from height
Do not immerse camera handle in water. Avoid moisture, and store product in a dry place.
Such measures reduce the risk of electric shock and damage. The lens and the tube are water
resistant when the unit is fully assembled, but the handle is not.
Do not use the camera if condensation forms inside the lens. Let the water evaporate before
using again.
Turn off the system if it is not in use.
This product can only be completely disconnected for from its power source by unplugging the
power adapter.
Attention should be given to the environmental aspects of battery disposal.
Remove the batteries when cleaning the unit.
Remove the batteries before storing the unit for a long time.
When necessary, REPLACE ALL FOUR (4) BATTERIES in this unit with new ones, not one (1) or
two (2) batteries at a time.
Use only the size and type of battery specified.
Be sure to install the battery with the correct polarity as indicated in the battery compartment.
Properly dispose of batteries. Exposure to high temperatures can cause batteries to e
xplode,
so do not dispose of in a fire. Place tape over the terminals to prevent direct contact with other
objects.
Some countries have regulations concerning battery disposal. Please follow all applicable
regulations.
21
22
GD8723 = GT8723(handle) + GT4853(camera)
GD8726 = GT8723(handle) + GT4806(camera)
GD8729 = GT8723(handle) + GT4809(camera)
02
WELCOME
STRUCTURE
Congratulations on your purchase of WiFi inspection camera. Please read the user manual carefully
before using this product. This product is designed as a remote inspection device with WiFi
transmission (support iPhone, iPad and Android phone), capable of recording video/taking pictures.
Appropriate for use in surveying pipes or other hard-to-reach places, equipment or furnishing
installation, car repair, etc. Features include waterproof LED lens, real-time recording.
Reset
Flexible Tube Interface
Power Indicator
Take a photo
Rotate button
Flexible Tube
FEATURES
●
●
●
●
●
●
●
●
●
WIFI transmission, support iPhone, iPad and Android phone
Allows for easy surveying of small, hard-to-reach places
Mini 17/9/5.8/5.5/4.5mm water-proof camera with 1m (3 ft.) flexible extended tube
Manufactured and tested to IP67 waterproof standard
Video recording and photo capture capability
Increase visibility with 3×zoom capability
Adjustable brightness on lens-mounted LED light
3 useful accessories included: Hook, mirror and magnet
Lightweight, hand-held design, flexible and convenient to use
Battery Slot
Mini Waterproof
LED Lens
Power Switch
Installation
PACKING LIST
To Install Batteries
(Dry your hands before installation or replacing batteries.)
1. Remove the cover as illustrated below:
Flexible Tube
with Lens
x 1
03
Handle
x 1
Accessories x 1
(only for GD8722)
Accessories x 1
(only for GD8723)
17mm
Camera
9mm
Camera
5.8mm
Camera
17mm
Side
Camera
4.5mm
Camera
for GD8722
for GD8723
for GD8725
for GD8726
for GD8727
5.5mm
Camera
for GD8729
2. Remove battery compartment and insert four (4) AA batteries into their appropriate
slots, with proper orientation, as indicated on the battery compartment.
3. Reinstall battery compartment and replace battery cover and screw
04
To Attach Flexible Tube with Handle
To connect the flexible tube camera with control
handle, first make sure that the keyed end of the
tube is aligned with the slot in the handle, then
use slight force to push them together. Once
properly aligned, twist the treaded knob clockwise
until the connection is securely in place.
Operation
Keyed end plugs into socket
Fasten the treaded knob
Basic Operation
1. As you roll the power switch to turn on the camera, the power indicator on the camera handle
will light. The rolling switch then acts as a dimmer for the twin LEDs that surround the camera
on the end of the flexible tube.
2. When in use, the tube should easily maneuver itself into position. Do not apply e
xcessive force.
The flexible tube can be bent into numerous shapes that may help you explore areas you otherwise
thought were impossible to see.
3. The accessories included with WiFi inspection camera can be used to retrieve small items lik
e
dropped rings or screws.
To Install Accessories
The three (3) included accessories (mirror, hook and magnet) are all attached to the camera in the
same way as illustrated below:
For GD8722
Aim at the cut of slot
Twin LEDs
provide
lighting
For GD8723
Click to lock up
Hook the hole
Wear the rubber ring
4. The connecting part of the handle can be rotated, the user can through the knob to lock / unlock.
Note: Please use coins except for sharp objects to operate, so as not to damage the knob.
For GD8722: to prepare accessory for installation, push down on stem-side
of black interface while pulling away from adjacent side. This will open the base
of the accessory. Next, align inside of stem-side to either treaded surface at
the base of camera head. Tighten to secure the accessory in place.
1
5. Operating the camera function on the handle, you must connect the WIFI of intelligent mobile device,
and turn on the APP software.
05
06
Note: The client supports Android and iOS.
WiFi Connection
Version: Android 2.2, iOS 4.3, and later versions
1.Touch “Settings” on the home screen of your device.
Default settings:
SSID:WIFICAMERA
Password:88888888
Operations for iOS Apple system client
Installation APP software
To install software for your smart mobile device that runs an iOS system:
1. Turn on the intelligent mobile device and enter APP Store
.
2.Touch “WLAN” and select your camera
(The initial SSID is “WIFICAMERA”).
3.Connect the WiFi with default password
(88888888). and touch “Join”.
Search for the software “wifi instrument cam”, and download.
2. Touch Install. The software can be installed on your device.
3. After the installation is complete, the icon of the software is displayed
on the home screen, as shown in the following figure.
Note: When the WIFI connection problem, the user can turn on / off the power switch of
handle to select WIFI channels. then reconnect the WIFI.
07
08
Device Operation
When the WiFi connection succeeds,the home screen is displayed on the device. Touch
If the WiFi connection succeeds, you will see the image captured by the WiFi camera in
to enter the software screen.
applications. If the WiFi connection fails, the screen shown in the following figure is displayed.
This screen is also displayed if a WiFi interruption occurs when you view an image.
In this case, exit the application and check whether the WiFi connection is proper.
Video
playback
Photo
Record
playback a video
Take
a photo
Settings
Video playback
Touch this
icon to open the video playback list and select the video you want to play back.
If you slide left, the button
is displayed. You can touch it to delete the video. when
browsing the video, you can touch this
icon to send e-mail.
Photo playback
09
Touch this
icon to open the photo playback list and preview the desired photos. you can
touch this
icon to send e-mail.
10
Take a photo
Touch this
2. Touch “WLAN” and touch
icon to take a photo.
on the right of the camera for which you want to change the
password.
3. Then touch “Forget this Network”.
Record a video
Touch this
icon to record a video. The recording time is displayed in the
upper left corner of the screen. Touch this icon again to stop the recording.
Settings
Touch this
icon to display the settings menu.
You can set a new SSID or password for your WiFi network.
Important Notes:
After you change the SSID or password, touch Settings on the home screen to forget this
network and reconnect your device to the network. Otherwise, a message indicating a login
error is always displayed. To forget this network:
1. Touch “Settings” on the home screen of your device.
11
12
4. Touch “Forget” to remove network records. Then, reconnect to the network using the
previous WiFi connection methods.
Operations for Android system client
Installation APP software
To install software for your smart mobile device that runs an Android system:
1. Turn on interlligent mobile device and enter Google Play store.
Search for the software “wifi instrument cam”, and download.
2. Touch Install. The software can be installed on your device.
3. After the installation is complete, the icon of the software is
displayed on the home screen, as shown in the following figure.
wifi instrument cam
ULIFE TEAM / Media and video
(2)
OPEN
WiFi Connection
Touch “Settings” on the home screen of your device.
Touch “WLAN” and select your camera (The initial SSID is “WIFICAMERA”)
and connect the WiFi with default password (88888888).
Note: When the WIFI connection problem, the user can turn on / off the power switch of
handle to select WIFI channels. then reconnect the WIFI.
13
14
Device Operation
If the WiFi connection succeeds, this
icon is highlighted and you
will see the image captured by the WiFi camera in applications.
When the WiFi connection succeeds, the home screen is displayed on the device.
If the WiFi connection fails, this
icon is dimmed and the background is
Touch
to enter the software screen.
black, as shown in the following figure.
If a WiFi interruption occurs when you view an image, the
icon becomes
Record
a video
Take
a photo
Video/Photo Settings
playback
dimmed and the picture viewing stops. In this case, exit the application and
check whether the WiFi connection is proper.
15
16
Record a video
Touch this
Settings
icon to record a video. The recording time is displayed in
Touch this
icon to display the settings menu. You can change the default SSID and
the upper left corner of the screen.
password of the WiFi camera. Touch
Touch this icon again to stop the recording.
Touch
to check whether the modification succeeds.
to cancel the setting.
Take a photo
Touch this
icon to take a photo.
Video and photo playback
Touch this
icon to list saved videos and pictures. Touch
to list saved videos. You can
select the video you want to play back or touch and hold the video to delete it. Touch
to list saved pictures. You can select the picture you want to view or touch and hold the
picture to display
. Then, touch
to delete the picture.
Important Notes:
After you change the SSID or password, touch Settings on the home screen to forget this
network and reconnect your device to the network. Otherwise, a message indicating a login
error is always displayed. To forget this network:
1.Touch “Settings” on the home screen of your device.
17
18
2.Touch
WLAN
to search for the WiFi name.
4.Touch “Forget” to remove network records. Then, reconnect to the network using the
previous WiFi connection methods.
3.Then touch the modified WiFi camera.
Note: Normally the yellow light is on. When the red light is on, the battery voltage is low and
the batteries must be replaced.
If you forget the SSID and password of the smart mobile device, you can press Reset
on the product for 5 seconds to enable factory defaults.
19
20
Specifications
Model No.
FCC information
GD8722
GD8723
GD8725
Imaging Sensor
Effective Pixels
GD8727
GD8729
PAL
704 x 576
640 x 480
640 x 488
640 x 488
320 x 240
720 x 625
NTSC
712 x 486
640 x 480
640 x 488
640 x 488
320 x 240
720 x 525
42o
35
5.8mm
17mm
Horizontal Viewing Angle
Tube Diameter
50
o
17mm
45
o
9mm
Minimum Illumination
Transmission Frequency
Transmit Power
camera
GD8726
CMOS
o
63
o
4.5mm
0 Lux (LED ON)
12+/-1.5 dBm
11b:-90,11g/n:-72 dBm
Modulation /
Demodulation Mode
802.11g/n:OFDM (BPSK, QPSK, 16QAM, 64QAM)
802.11b:DSSS (CCK, DQPSK, DBPSK)
Transmission Rate
1--150M bps
Frequency Stability
±20 PPm
Unobstructed
Effective Range
≥10 m
Working Voltage
DC 4V--6.5V
Consumption Current (Max.)
< 400mA
Working Time
Waterproof Capacity
Dimensions (W x D x H)
>1 hours
AA x 4 batteries (1.5V x 4)
IP67 (for lens/tube only)
260 x 50 x 40 (mm) (Excluding Flexible Tube)
Handle Weight
Operating Temperature
Operating Humidity (Max.)
o
2400~2483.5MHz
Receiver Sensitivity
Power Supply
48
5.5mm
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference;
(2) This device must accept any interference received, including interference that may cause
undesired operation. Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
174g
O
O
O
O
-10 C~50 C/14 F~122 F
20~85%RH
* Actual transmission range of wireless monitoring may vary according to the weather, location,
interference or building construction.
* All specifications are subject to minor change without prior notice.
The graphics included in this user manual are subject to minor change without notice.
21
22
Download PDF