PRODUCT GUIDE

PRODUCT GUIDE
www.quikrete.com
TABLE
OF
CONTENTS
CONCRETE MIXES ...................................................................... 3
MORTAR & MASONRY PRODUCTS ........................................... 4
PORTLAND & MASONRY CEMENTS ............................................. 6
CONCRETE REPAIR & WATERPROOFING ..................................... 7
CRACK SEALERS & CAULKS ...................................................... 9
POLYURETHANE SEALANTS, ADHESIVES & ANCHORING EPOXIES..... 10
SEALERS & ADDITIVES ............................................................... 11
CONSTRUCTION & RESTORATION PRODUCTS ............................ 13
DOT REPAIR MATERIALS ............................................................ 15
STUCCO PRODUCTS ................................................................... 16
SANDS & AGGREGATES .............................................................. 17
HARDSCAPES by QUIKRETE ® ........................................................ 19
UNDERLAYMENTS & THINSETS ................................................... 20
BLACKTOP PRODUCTS ................................................................ 21
DECORATIVE CONCRETE STAINS ............................................... 22
SURFACE PREPARATION ............................................................. 23
CONCRETE & MASONRY COATINGS ................................................ 23
FLOOR COATINGS ................................................................................. 24
CONCRETE ACCESSORIES .................................................................... 25
WINTER PRODUCTS .............................................................................. 26
Since 1940, The QUIKRETE® Companies has served the construction
and home improvement industries. The QUIKRETE® brand is the most
respected and trusted brand of cement and concrete products in the
United States.
With more than 100 manufacturing locations throughout the United States, Puerto
Rico, Canada, Central and South America, The QUIKRETE® Companies is
committed to providing reliable, high performance and innovative products for the
contractor and homeowner.
What America’s Made Of.®
Concrete Mixes
CONCRETE MIX
CONCRETE MIXES
Original 4000 psi average compressive strength blend of
Portland cement, sand, gravel or stone, and other approved
ingredients. Just add water. Use For:
• Floors
• Footings • Steps
• Sidewalks
• Patios
• Curbs
• Setting Posts
Exceeds the requirements of ASTM C 387
Item No.
Package Size
Metric
Quantity
1101-10
10 lb. bag
4.5 kg
6/bale
1101-40
40 lb. bag
18.1 kg
80/pallet
1101-60
60 lb. bag
27.2 kg
56/pallet
80 lb. bag
1101-80
* 90 lb. bags available regionally.
36.2 kg
42/pallet
FAST-SETTING CONCRETE MIX
A special blend of fast-setting cements, sand and gravel designed
to set hard in approximately 20-40 minutes. Use for building and
setting posts. Sets posts without mixing. Pour dry mix into hole
and soak with water.
Use For Setting:
Use For Building:
Item No.
Package Size
Metric
Quantity
1004-50
50 lb. bag
22.7 kg
64/pallet
• Fence posts
• Steps
• Mailbox posts • Sidewalks
• Swing sets
• Air conditioner pads
Exceeds the requirements of ASTM C 387
QUIKRETE® 5000 CONCRETE MIX
Commercial Grade concrete mix designed for higher-early
strength gain. Achieves 2500 PSI in 3 days and 5000 PSI in 28
days. Ideal for cold weather application. Use For:
Item No.
Package Size
Metric
Quantity
1007-01
60 lb. bag
27.2 kg
56/pallet
1007-00
80 lb. bag
36.2 kg
42/pallet
N
EW
!
• Concrete projects 2” thick or more that require high strength
• Driveway aprons
• Patios
• Curbs
• Sign footings
• Deck supports
• Floors
Exceeds the requirements of ASTM C 387
Q•MAX PRO CONCRETE MIX
Fiber reinforced, rapid hardening concrete formulated to provide
a 1-hour working time, a walk-on time of 3 hours, and achieve
a compressive strength of 6500 PSI. The mix provides superior
workability and finishing characteristics and resists drying
shrinkage cracks. Air entrained for improved freeze-thaw durability
and contains a corrosion inhibitor to protect reinforced steel.
Item No.
Package Size
Metric
Quantity
1004-81
80 lb. bag
36.2 kg
42/pallet
CRACK RESISTANT CONCRETE MIX
Commercial Grade concrete mix with air entraining admixture,
and alkali-resistant reinforcing fibers. Formula significantly
reduces cracking from drying shrinkage and is designed for
use in structural concrete applications. Achieves 4000 PSI in
28 days. Other benefits & features include:
• Superior workability
• Provides greater impact resistance
• Air entrained for improved freeze-thaw durability
• Eliminates the need for wire mesh in typical slab-on-grade slabs
Exceeds the requirements of ASTM C 387
Item No.
Package Size
Metric
Quantity
1006-67
60 lb. bag
27.2 kg
56/pallet
1006-80
80 lb. bag
36.2 kg
42/pallet
COUNTERTOP MIX
A specially formulated flowable high strength concrete mix
for usein pre-cast and cast-in-place concrete countertop
applications. Available in Gray & Tint-Base White. Other
benefits and features include:
• High flow formula minimizes the need for mechanical vibration
• Reduced shrinkage formulation
• Strip forms in 18 hours
• Exceeds 2,500 PSI (17.7 MPa) @ 3 days
3,500 PSI (24.1 MPa)@ 7 days
5,000 PSI (34.5 MPa) @ 28 days
Item No.
Package Size
Metric
Quantity
Gray
80 lb. bag
36.2 kg
42/pallet
80 lb. bag
36.2 kg
42/pallet
1106-80
Tint Base White
1106-81
QUIKRETE® Timeline: 1940-2015
May 22, 1940 Maintenance
Products Inc - QUIKRETE® Founded
3
April 1951 Produces first QUIKRETE®
branded product: Gemaco QUIKRETE®
August 1954 QUIKRETE®
receives US trademark registration
Mortar & Masonry Products
MORTAR MIX
A blend of masonry cement and graded sand. Just add water.
Use for non structural construction & repair of brick,
block and stone:
• Barbecues
• Pillars
• Planters
• Tuck pointing mortar • Veneers
• Non-structural walls
Meets the requirements of ASTM C 270 & C 1714 for Type N Mortar
MASON MIX
Item No.
Package Size
Metric
Quantity
1102-10
10 lb. bag
4.5 kg
6/bale
1102-40
40 lb. bag
18.1 kg
80/pallet
1102-60
60 lb. bag
27.2 kg
56/pallet
1102-80
80 lb. bag
36.2 kg
42/pallet
Package Size
Metric
Quantity
1136-00
60 lb. bag
27.2 kg
56/pallet
1136-80
80 lb. bag
36.2 kg
42/pallet
1136-86
80 lb. bag
36.2 kg
42/pallet
Type M
1136-85
80 lb. bag
36.2 kg
42/pallet
Item No.
Package Size
Metric
Quantity
80 lb. bag
36.2 kg
42/pallet
1136-72
80 lb. bag
36.2 kg
42/pallet
Item No.
Package Size
Metric
Quantity
1610-00
50 lb. bag
22.7 kg
63/pallet
High strength, contractor grade, pre-blended mortar mix.
Mason Mix contains properly graded masonry sand and
requires only the addition of water. Use for structural &
non-structural masonry applications above and below
grade:
Item No.
• Walls
• Brick/stone veneers
• Columns
• Tuck pointing
Meets the requirements of ASTM C 270 & C 1714
* Also available in 3000 lb. bulk bags
Type S
Type N
MORTAR & MASONRY PRODUCTS
MASON MIX - COLORED FORMULA
High strength, contractor grade, pre-blended mortar mix.
Colored Mason Mix contains properly graded masonry
sand and color pigment. Use for structural masonry
applications above and below grade:
Type S
1136-71
• Walls
• Brick/stone veneers
• Columns
• Tuck pointing
• Also available in Type “N” and “M” formulations
Meets the requirements of ASTM C 270 & C 1714
Type N
* Contact your local representative for exact color availability.
* Also available in 3000 lb. bulk bags
GLASS BLOCK MORTAR
Specifically formulated blend of white sand, white cement,
hydrated lime and waterproofing additives. Just add water.
Use For:
• Laying glass block for interior and exterior walls
• Laying brick, block or tile where white mortar is desired
Meets the requirements of ASTM C 270 & C 1714 for Type S Mortar
VENEER STONE MORTARS
A Portland cement and hydrated lime based mortar designed
for veneer applications and tuck pointing of manufactured
and natural stone. Also available in Polymer-Modified
and Natural Stone formulas.
• Apply directly to concrete and masonry surfaces or over
expanded metal lath
• Superior bond strength
• Consistent, pre-blended mix
Meets the requirements of ASTM C 270 & C 1714
* Also available in 3000 lb. bulk bags
January 1959 Introduces
QUIKRETE® Vinyl Concrete Patcher
January 1967 Introduces
Hydra-Hold (Hydraulic Water Stop)
Item No.
Package Size
Metric
Quantity
1137-80
80 lb. bag
36.2 kg
42/pallet
80 lb. bag
36.2 kg
42/pallet
80 lb. bag
36.2 kg
42/pallet
Poly-Mod
1137-85
Natural Stone
1137-88
April 1968 Publishes Do-It-Yourself
With Packaged Concrete
And Mortar Guide
1972
4
10th Plant
Mortar & Masonry Products
ROOF TILE MORTAR FL-15
Contractor grade, high bond strength mortar. Use For:
• Setting flat and low profile clay, cement and other roof tile
• Roofs up to 15 feet high
Meets the requirements of ASTM C 270 for Type M Mortar
Item No.
Package Size
Metric
Quantity
1140-80
80 lb. bag
36.6 kg
42/pallet
CORE-FILL GROUTS
A properly proportioned mixture of Portland cement, graded
aggregate, and other ingredients designed to provide a
flowable grout, requiring only the addition of water. Available
in Fine and Coarse. Use For:
Item No.
MORTAR & MASONRY PRODUCTS
Package Size
Metric
Quantity
80 lb. bag
36.2 kg
42/pallet
80 lb. bag
36.2 kg
42/pallet
Coarse
• Filling masonry block cores
• Pumped or poured applications
• Use Fine Core-Fill Grout when grout space is less than 4 inches
in either direction
• Use Coarse Core-Fill Grout when grout space it greater than 4
inches in either direction
1585-07
Fine
1585-08
Meets the strength requirements of ASTM C 476
SELF-CONSOLIDATING CORE-FILL
GROUT
A Portland cement based highly fluid grout specifically
designed to fill masonry block cores without segregation
Other benefits & features include:
• Eliminates the need for vibrating.
• Can be placed in single lifts up to 12 ft. 8 in. high
• Contains 3/8 in. (9.5 mm) aggregate.
• For use when grout space is greater than 4 in. (100 mm)
in both directions.
Item No.
Package Size
Metric
Quantity
1585-06
80 lb. bag
36.2 kg
42/pallet
Meets the requirements of ASTM C 476 at 24-28 in. (600-700 mm)
slump flow
September 1974 First national
QUIKRETE® ad: The Turnover Twins
1977
5
20th Plant
January 1977
Introduces QUIKWALL
Surface Bonding Cement
PORTLAND & MASONRY CEMENTS
PORTLAND CEMENT
Mixed with aggregate and other ingredients to make
concrete mix, mortar mix and base coat stucco.
Available in Type I, Type I/II, Type II and Type III.
To make Concrete Mix:
To make Type S Mortar Mix:
• 3 Parts Gravel
• 3½ to 4½ Parts Masonry Sand
• 2 Parts All-Purpose Sand
• ½ Part Hydrated Lime
• 1 Part Portland Cement (by volume) • 1 Part Portland Cement (by volume)
Item No.
Package Size
Metric
Quantity
1124-31
31 lb. bag
14.1 kg
100/pallet
1124-47
47 lb. bag
21.3 kg
63/pallet
1124-94
94 lb. bag
42.6 kg
35/pallet
1124-42
92.6 lb. bag
42 kg
35/pallet
Meets the requirements of ASTM C 150 and Federal Specifications for Portland cement.
MASONRY CEMENT
Available in Type N and Type S masonry cement.
To make Type N Mortar Mix:
• 3 Parts Masonry Sand
• 1 Part Type N Masonry Cement (by volume)
To make Type S Mortar Mix:
• 3 Parts Masonry Sand
• 1 Part Type S Masonry Cement (by volume)
Item No.
Package Size
Metric
Quantity
70 lb. bag
31.7 kg
40/pallet
70 lb. bag
31.7 kg
40/pallet
Type S
1125-71
Type N
1125-70
Meets the requirements of ASTM C 91 and Federal Specifications for masonry cement.
PORTLAND-LIME CEMENT
Blend of Portland cement and hydrated lime meeting
the Type S proportions.
Available Regionally.
To make Type S Mortar Mix:
• 2½ to 3 Parts Masonry Sand
• 1 Part Portland-Lime Cement (by volume)
Item No.
Package Size
Metric
Quantity
1125-21
70 lb. bag
31.7 kg
40/pallet
Item No.
Package Size
Metric
Quantity
1125-98
94 lb. bag
42.6 kg
35/pallet
Item No.
Package Size
Metric
Quantity
1201-85
80 lb. bag
36.2 kg
42/pallet
Item No.
Package Size
Metric
Quantity
2121-94
94 lb. bag
42.6 kg
35/pallet
Meets the requirements of ASTM C 91 and Federal Specifications for masonry cement.
PREMIUM PLASTERING CEMENT
Properly proportioned blend of Portland cement with air
entraining and plasticized admixtures for use in base
coat and finish coat mixes. Formulation provides improved
workability, reduced shrinkage and low-sag characteristics.
Available Regionally.
Meets the requirements of ASTM C 91 and Federal Specifications for masonry cement.
Blended cement designed for use with plaster sand to make
base coat stucco and finish coat stucco mixes.
Available Regionally.
To make base coat stucco mix:
• 3-4 parts plaster sand (ASTM C 897)
• 1 part stucco cement (by volume)
Meets the requirements of ASTM C 91
PLASTIC CEMENT
Blended cement specifically designed for use with plaster
sand to make Base Coat Stucco. Available Regionally.
To make Scratch and Base Coat Stucco Mix:
• 3 to 4 Parts Plaster Sand
• 1 Part Plastic Cement (by volume)
Portland & masonry cements
STUCCO CEMENT
Meets the requirements of ASTM C 1328 Type M and S.
May 1980 Introduces color-coded
pails for QUIKRETE® Repair Products
June 1982 First
QUIKRETE® Profit Manual
1981
6
30th Plant
CONCRETE REPAIR & WATERPROOFING
Concrete Repair & Waterproofing
CONCRETE RESURFACER
A special blend of Portland cement, sand, polymer modifiers
and other additives. Designed to provide a shrinkage
compensated repair material for making thin repairs to sound
concrete in need of surface renewal. Can be squeegee, trowel
or brush applied. Use For:
• Sidewalks
• Driveways
• Curbs
• Pool decks• Patios
• Concrete floors
• Parking decks
• Floors
Item No.
Package Size
Metric
Quantity
1131-20
20 lb. pail
9.1 kg
60/pallet
1131-40
40 lb. bag
18.1 kg
64/pallet
1131-40
40 lb. bag
18.1 kg
35/mini pallet
1131-80
80 lb. bag
36.2 kg
42/pallet
SAND/TOPPING MIX
Consists of a uniformly blended mixture of Portland cement,
graded sand and other approved ingredients.
Use For:
• Repairing and topping damaged concrete surfaces less than
2 inches thick
• As a base for laying flagstone and paving bricks
Item No.
Package Size
Metric
Quantity
1103-10
10 lb. bag
4.5 kg
6/bale
1103-40
40 lb. bag
18.1 kg
80/pallet
1103-60
60 lb. bag
27.2 kg
56/pallet
1103-80
80 lb. bag
36.2 kg
42/pallet
VINYL CONCRETE PATCHER
Multi-purpose concrete repair material with strong adhesive
properties. Trowels to a feather edge of 1⁄16”. Made of a
special blend of exterior grade vinyl resin, fine sand, and
Portland cement. Just add water. Available in gray and white.
Use For:
• Making smooth repairs to cracked or chipped concrete
floors, sidewalks or steps
QUICK-SETTING CEMENT
Specially formulated to set in approximately 10–15 minutes.
Can be molded or sculpted into place. Use For:
• Making concrete repairs where rapid setting is required
• Ideal for repairing broken edges of concrete steps and curbs
Item No.
Package Size
Metric
Quantity
1133-11
10 lb. pail
4.5 kg
4/case
1133-20
20 lb. pail
9.1 kg
60/pallet
1133-40
40 lb. bag
18.1 kg
64/pallet
1133-40
40 lb. bag
18.1 kg
35/mini pallet
Item No.
Package Size
Metric
Quantity
1240-11
10 lb. pail
4.5 kg
4/case
1240-20
20 lb. pail
9.1 kg
60/pallet
1240-50
50 lb. bag
22.7 kg
64/pallet
Item No.
Package Size
Metric
Quantity
1245-11
10 lb. pail
4.5 kg
4/case
1245-20
20 lb. pail
9.1 kg
60/pallet
1245-60
50 lb. pail
22.7 kg
64/pallet
ANCHORING CEMENT - EXTERIOR USE
A pourable rapid setting expansive cement that develops
strength greater than concrete. Sets in 10-30 minutes.
Expands as it hardens to fill voids and lock itself securely into
place. Suitable for wet environments. Use For:
• Setting bolts, handrails, or anything metal to be anchored in
concrete
• Ideal for repairing loose wrought iron railings
• Can be used for interior or exterior applications
August 1985 Secures Don Knotts
as spokesperson.
Publishes Build & Repair With Concrete
1984
7
40th Plant
March 1988 Introduces
Fast-Setting Concrete Mix
HYDRAULIC WATER-STOP CEMENT
Rapid setting, high strength repair material designed to plug
leaks instantly in concrete and masonry. Sets in 3-5 minutes
and can be used above and below grade. Use For:
Item No.
Package Size
Metric
Quantity
1126-11
10 lb. pail
4.5 kg
4/case
1126-20
20 lb. pail
9.1 kg
60/pallet
• Blocking running water or leaks in cracked masonry or
concrete surfaces
• Can be used on swimming pools, foundations and for
sealing around concrete pipe
1126-50
50 lb. pail
18.1 kg
64/pallet
10 lb. pail
4.5 kg
4/case
White
1126-15
Zip & Mix - Repair Mortar
Polymer modified fast-setting repair mortar in a new zip
closure pouch. Add water directly to the pouch, zip the pouch
closed and knead the bag for 3 minutes, then apply right out
of the pouch. Use For:
• Vertical or horizontal repairs to concrete and masonry surfaces
from 1/8” to 2” thick.
Item No.
Package Size
Metric
Quantity
1241-15
3 lb. bag
1.36 kg
12/case
Item No.
Package Size
Metric
Quantity
8650-35
1 qt. pail
.95 L
12/case
CONCRETE REPAIR & WATERPROOFING
Concrete Repair & Waterproofing
CONCRETE PATCHING COMPOUND
Pre-mixed, ready to apply, acrylic patching compound for
non-structural repairs to concrete and masonry surfaces. Use
for patches up to ¼” thick. No mixing required Use for:
• Sidewalks
• Steps
• Walkways
• Patios
HEAVY DUTY MASONRY COATING
Package Size
Metric
Quantity
2401-20
20 lb. pail
9.1 kg
60/pallet
1301-40
40 lb. bag
18.1 kg
63/pallet
2402-20
20 lb. pail
9.1 kg
60/pallet
1312-40
40 lb. bag
18.1 kg
63/pallet
A powdered mixture of Portland cement, waterproofing agents
and sand used to seal and beautify concrete, block, brick,
stucco, and stone walls. Can be used in both interior and
exterior applications both above grade and below. Available
in white and gray. Use For:
Item No.
• Basement walls
• Ponds
• Retaining walls
• Swimming pools
White
Gray
MULTI-PURPOSE
CONCRETE RESURFACER
Polymer modified Portland cement based trowel applied
repair material designed to provide a new, durable and wear
resistant surface over worn or scaling concrete. Ideal for
resurfacing large areas. Use for:
• Sidewalks
• Patios
• Loading docks
April 1988 Runs first national TV ads with
Don Knotts featuring Fast-Setting Concrete and
The QUIKRETE® Concrete Repair Center
• Steps
• Driveways
• Traffic barriers
January 1991 Introduces
Gray Concrete Crack Seal
& Fiber-Reinforced Concrete
Item No.
Package Size
Metric
Quantity
1131-45
40 lb. bag
18.1 kg
64/pallet
• Ramps
• Floors
January 1992 Introduces
QUIKRETE® 5000, Mason Mix
& WALKMAKER
8
Crack Sealers & Caulks
CONCRETE CRACK SEAL
A uniformly blended latex emulsion, specially designed to
adhere to all concrete surfaces. No mixing is required. Just
pour from the bottle. Blends in with the natural color of
concrete. Use For:
Item No.
Package Size
Metric
Quantity
8640-15
5.5 oz. tube
163 mL
12/case
8640-00
1 qt. bottle
946 mL
12/case
8640-01
1 gal. bottle
3.8 L
4/case
Item No.
Package Size
Metric
Quantity
8620-13
5.5 oz. tube
163 mL
12/case
8620-10
10 oz. tube
296 mL
12/case
Item No.
Package Size
Metric
Quantity
8620-05
5.5 oz. tube
163 mL
12/case
8620-09
10 oz. tube
296 mL
12/case
Item No.
Package Size
Metric
Quantity
8650-05
5.5 oz. tube
163 mL
12/case
8650-10
10 oz. tube
296 mL
12/case
Item No.
Package Size
Metric
Quantity
8630-15
5.5 oz. tube
163 mL
12/case
8630-10
10 oz. tube
296 mL
12/case
Item No.
Package Size
Metric
Quantity
8620-21
10 oz. tube
296 mL
12/case
• Repairing cracks in concrete sidewalks, patios and driveways
CONCRETE REPAIR
A weather-resistant, sanded acrylic and flexible crack-filler
and sealer. Helps prevent water and ice damage to concrete
& masonry surfaces. Dries to a textured finish to blend with
surrounding surface. Apply with standard caulking gun for 10
oz. size. Use For:
• Repairing cracks in concrete, masonry and stucco
• Ideal for vertical surfaces
MORTAR REPAIR
Crack Sealers & Caulks
A sanded acrylic formula that adheres to brick, block, stone
and concrete surfaces. Texture and color blends with the
surrounding mortar. On the 10 oz. caulk tube the square
applicator tip is designed to smooth mortar joints.
Use For:
• Tuck-pointing and sealing mortar joints
STUCCO REPAIR
Fills and seals cracks in stucco up to 1/2” (12 mm) wide.
Weather resistant formula provides excellent adhesion and
flexibility. Sanded acrylic formula blends with the texture of
the surrounding stucco surface. Use For:
• Vertical or horizontal stucco repair applications
BLACKTOP REPAIR
A weather-resistant crack-filler, provides excellent adhesion
and minimal shrinkage. Helps prevent water and ice damage
to blacktop surfaces. Dries to a textured black finish. Nonflammable. Use For:
• Repairing cracks in blacktop and asphalt surfaces
including driveways, roofs and chimney flashings
FIREPLACE REPAIR MORTAR
A silicate based refractory cement caulk for tuck-pointing
damaged fireplace mortar joints and repairing cracked or
chipped firebricks in fireplaces and wood-burning stoves.
It provides superior adhesion and withstands temperatures of
2000º F (1093º C). Use For:
• Tuck-pointing damaged fireplace mortar joints and
repairing cracked or chipped firebricks
Meets the requirements of ASTM E 136
January 1993 Introduces
QUIKRETE® 1-800 consumer hotline
1992
9
50th Plant
October 1994 Introduces
Concrete Project Instruction Center
Polyurethane Sealants, Adhesives & Anchoring Epoxies
POLYURETHANE
SELF-LEVELING SEALANT
High performance, commercial grade, polyurethane sealant,
used for sealing cracks and joints in horizontal concrete
surfaces. Self leveling formula provides superior adhesion,
flexibility and durability. Meets ASTM C 920 Type S, Grade P,
Class 25. Available in gray or sandstone.
Use For:
• Sealing expansion joints in concrete slabs
• Sealing cracks in concrete floors, driveways, patios, steps,
basements and pool decks
Item No.
Package Size
Metric
Quantity
8660-10
10.1 oz. tube
300 mL
12/case
8660-30
29 oz. tube
858 mL
6/case
29 oz. tube
858 mL
6/case
Gray
Sandstone
8660-31
POLYURETHANE NON-SAG SEALANT
High performance, commercial grade polyurethane sealant
designed for vertical and overhead surfaces. The non-sag
formula provides superior adhesion and flexibility. Meets
ASTM C 920, Type S, Grade NS.
Use For:
Item No.
Package Size
Metric
Quantity
8660-11
10.1 oz. tube
300 mL
12/case
• Expansion joints in concrete wall panels and stucco walls
• Sealing around window and door openings
• Sealing cracks in concrete, stucco and masonry surfaces
POLYURETHANE
CONSTRUCTION ADHESIVE
High performance, commercial grade adhesive designed for
permanently bonding concrete, brick, marble, stone, wood,
glass, aluminum, steel, PVC and tile.
Use For:
Item No.
Package Size
Metric
Quantity
9902-10
10.1 oz. tube
300 mL
12/case
9902-11
29 oz. tube
858 mL
6/case
• Repairing broken concrete
• Bonding retaining wall block and caps
Commercial grade polyurethane sealant for permanently
sealing and waterproofing cracks in concrete, masonry and
stucco surfaces. The textured, non-sag formula blends with
the surrounding surface. Dries to a firm, flexible consistency.
Use on vertical and horizontal applications
Item No.
Package Size
Metric
Quantity
8620-17
10.1 oz. tube
300 mL
12/case
Item No.
Package Size
Metric
Quantity
8620-18
10.1 oz. tube
300 mL
12/case
Item No.
Package Size
Metric
Quantity
8.6 oz. tube
255 mL
12/case
8620-31
8.6 oz. tube
255 mL
12/case
Item No.
Package Size
Metric
Quantity
6917-42
3/4” diameter
20’ long
19.1 mm
x6M
12/case
POLYURETHANE
MORTAR JOINT SEALANT
Commercial grade polyurethane sealant for sealing,
waterproofing and tuck-pointing damaged and deteriorating
mortar joints. The textured, matte-finish non-sag formula
blends with surrounding mortar joints. Dries to a firm, flexible
consistency.
ANCHORING EPOXY
A two component, high modulus, non-sag, gray, structural
epoxy. Anchoring Epoxy is solvent free, low odor, high strength
and moisture insensitive. FastSet Anchoring Epoxy is suitable
for vertical or horizontal applications with a working time of 4-5
minutes. High Strength Anchoring Epoxy is suitable for horizontal
applications with a working time of approximately 20 minutes.
Use For:
FastSet
8620-30
High Strength
• Anchoring bolts, threaded rods, tie bars and rebar dowels into
concrete and masonry substrates.
• Bonding raised reflective pavement markers to concrete or asphalt.
BACKER ROD
Foam rope used to partially fill large cracks, gaps and joints
before applying sealant. Use for horizontal and vertical
applications. Available in 3/4” diameter in 20 foot lengths.
January 1994 Introduces
Liquid Cement Colors
1995
January 1995 Introduces
Acrylic Concrete Cure & Seal
POLYURETHANE SEALANTS, ADHESIVES & ANCHORING EPOXIES
POLYURETHANE
CONCRETE CRACK SEALANT
January 1996
Introduces
bilingual packaging
10
60th Plant
Sealers & Additives
SEALERS & ADDITIVES
CONCRETE & MASONRY
WATERPROOFING SEALER - NATURAL LOOK
Water based, penetrating, silane/siloxane sealer waterproofs
and protects concrete, brick, masonry, pavers and stucco
surfaces.
Clear sealer does not change the surface
appearance. Seals from water, salts and oils. UV Resistant.
Interior or exterior use. Wait 30 days before applying to new
concrete surfaces.
Use for sealing:
• Driveways
• Patios
• Stucco
• Walls
• Sidewalks
• Pavers
Item No.
Package Size
Metric
Quantity
8800-05
1 gal. bottle
3.8 L
4/case
8800-07
5 gal. pail
18.9 L
36/pallet
Item No.
Package Size
Metric
Quantity
8800-06
1 gal. bottle
3.8 L
4/case
8800-08
5 gal. pail
18.9 L
36/pallet
Item No.
Package Size
Metric
Quantity
8730-02
1 gal. bottle
3.8 L
4/case
8730-03
5 gal. pail
18.9 L
36/pallet
Item No.
Package Size
Metric
Quantity
9902-14
1 qt. bottle
946 mL
12/case
9902-01
1 gal. bottle
3.8 L
4/case
9902-05
5 gal. pail
18.9 L
36/pallet
Item No.
Package Size
Metric
Quantity
8610-14
1 qt. bottle
946 mL
12/case
8610-01
1 gal. bottle
3.8 L
4/case
8610-05
5 gal. pail
18.9 L
36/pallet
• Steps
• Floors
• Bricks
CONCRETE & MASONRY
HIGH GLOSS SEALER - WET LOOK
Water based siliconized-acrylic clear sealer waterproofs,
protects and enhances the color of concrete, masonry, brick,
paver and natural stone surfaces. Seals from acids, grease,
food stains, oil, salt and more. UV resistant. Interior or exterior
use. Wait 30 days before applying to new concrete surfaces.
Use for Sealing:
• Decorative concrete
• Exposed Aggregate
• Pavers
• Brick
• Floors
• Steps
• Natural Stone
• Stucco
ACRYLIC CONCRETE CURE & SEAL SATIN FINISH
Water based, clear acrylic coating cures freshly placed
concrete and seals concrete and masonry surfaces.
Features and benefits include:
• Eliminates the need for water curing freshly placed concrete.
• Protects and seals from acids, grease, oils, food stains, salt
and more.
Meets the requirements of ASTM C 309
CONCRETE BONDING ADHESIVE
Permanently bonds new concrete, plaster, and stucco to
existing concrete, plaster or stucco. Eliminates the need for
roughing the surface before the application.
Use For:
• Bonding applications on concrete overlays 1” or thicker
• Interior and exterior applications
Meets the performance requirements of ASTM C 1059 Type I & II
CONCRETE ACRYLIC FORTIFIER
Acrylic resin admixture designed to enhance bonding and
water resistance of concrete patching materials, stucco,
surface bonding cement, thin-set mortars and tile grouts.
Use To:
• Improve bonding to existing surfaces
• Eliminate moist curing in most circumstances
• Reduce permeability
Meets the requirements of ASTM C 1438
January 1997 Launches
first website
January 1998 Introduces
Commercial Grade FASTSET Products
1998
11
70th Plant
Sealers & Additives
LIQUID CEMENT COLORS
Package Size
Metric
Quantity
10 oz. bottle
296 mL
12/case
10 oz. bottle
296 mL
12/case
10 oz. bottle
296 mL
12/case
10 oz. bottle
296 mL
12/case
1317-04
10 oz. bottle
296 mL
12/case
Item No.
Package Size
Metric
Quantity
8601-14
1 qt. bottle
946 mL
12/case
8601-01
1 gal. bottle
3.8 L
4/case
Item No.
Package Size
Metric
Quantity
9800-01
1.5 lb. carton
.68 kg
24/case
SEALERS & ADDITIVES
Item No.
Mix with water and then add to dry concrete mix. One bottle
will mix with two 80 lb. or 60 lb. bags of Concrete Mix.
Available in red, brown, buff, charcoal and terra cotta.
Use For:
Charcoal
1317-00
Brown
• Adding color to WalkMaker projects
• Adding color to any concrete, mortar, sand topping or stucco project
• Provides permanent integral color
Meets the requirements of ASTM C 979
1317-01
Buff
1317-02
Red
1317-03
Terra Cotta
Charcoal
Brown
Buff
Red
Terra Cotta
CONCRETE & ASPHALT CLEANER CONCENTRATE
A multi-purpose cleaner that is safe to use on any hard surface
where water can be used. Use prior to any repair project to
achieve the strongest bond. Non-toxic, non-flammable and
contains no acid.
Use For:
• Removing soil, grease, oil, etc. from all types of masonry, stucco
concrete, mortar and grout
CONCRETE MIX ACCELERATOR
Add to concrete mix for faster set time. Use one to two boxes
of accelerator per 60 lb. (27.2 kg) bag of concrete mix.
Use For:
• Fence and lamp post
• Swing sets
• Curbs
• Basketball backboards
• Piers
THERMO-LUBE®
Winter admixture. Reduces the time that the fresh concrete or
mortar needs to be protected from freezing. Reduces set time
and improves initial strength gain.
Use In:
Item No.
Package Size
Metric
Quantity
1905-01
1 gal. bottle
3.8 L
4/case
1905-05
5 gal. pail
18.9 L
36/pallet
• Concrete and mortar in cold weather
LIQUID STUCCO & MORTAR COLORS
Adds a decorative touch to stucco and mortar projects.
Add to mixing water and then mix colored water with dry
mix. Provides permanent integral color.
Use with any of our mortar or stucco products including:
• Mason Mix
• QUIKRETE® Finish Coat Stucco
• Heavy Duty Masonry Coating
• QUIKWALL®
• One Coat Fiberglass Reinforced Stucco
20 colors available. Textured color chart available.
January 2000 Introduces
“QUIKRETE® Makes It Easy” ad campaign
Item No.
Package Size
Metric
Quantity
1319
10 oz. bottle
296 mL
12/case
Shell-00
Champagne-12
Cream-21
Ivory-02
Opal-14
Aspen-20
Sandstone-10
Wheat-15
Canyon-11
Palomino-04
Desert-16
Dune-03
Coral-09
Blush-19
Sage-18
Birch-17
Twilight-13
Charcoal-01
Pewter-06
Mocha-05
January 2001 Introduces
Concrete Resurfacer
January 2003 Introduces project
illustrations featured on product packaging
12
Construction & RESTORATION Products
FASTSET CONCRETE MIX
A rapid hardening concrete mix designed with a 20-30 minute
set time, allowing for mixing, pouring and finishing. Use at any
thickness from 1-1/2” to 24”.
Use to build or repair:
• Street repairs
• Concrete floors
• Concrete parking lots
• Bridge decks
Compressive Strength ASTM C 39
3 Hours
3000 psi
20.7 MPa
24 Hours
5000 psi
34.5 MPa
7 Days
6000 psi
41.3 MPa
28 Days
7000 psi
48.3 MPa
• Highways
• Sidewalks
Item No.
Package Size
Metric
Quantity
1004-51
70 lb. bag
31.7 kg
42/pallet
Exceeds the requirements of ASTM C 928 R-3
FASTSET REPAIR MORTAR
CONSTRUCTION & RESTORATION PRODUCTS
A low-sag repair mortar formula. Ideal for vertical & overhead
repairs. 20-30 minute working time & unique properties allow
sculpting of the material during placement.
Use for repairing:
• Pre-stress panels
• Loading docks
• Retaining walls
• Bridge columns
• Tunnels
• Curbs/steps
Compressive Strength ASTM C 109 Modified
3 Hours
2000 psi
13.8 MPa
24 Hours
4000 psi
27.6 MPa
7 Days
5000 psi
34.5 MPa
Exceeds the requirements of ASTM C 928 R-2
28 Days
6000 psi
41.4 MPa
Item No.
Package Size
Metric
Quantity
1241-20
20 lb. pail
9.1 kg
60/pallet
1241-50
50 lb. pail
22.7 kg
each
1241-60
60 lb. bag
27.2 kg
56/pallet
Item No.
Package Size
Metric
Quantity
1585-20
20 lb. pail
9.1 kg
60/pallet
1585-50
50 lb. pail
22.7 kg
each
1585-09
60 lb. bag
27.2 kg
56/pallet
FASTSET NON-SHRINK GROUT
For structural concrete repairs from 1/4” to 24” deep. 30
minute set time, non shrink characteristics & rapid strength
gain. Can be mixed to a plastic, flowable or fluid consistency.
Use for anchoring & grouting:
• Anchor bolts
• Floor leveling
• Steel column bases
• Bearing plates
• Pre-cast concrete keyways
Compressive Strength ASTM C 109
Time
Fluid
3 Hours
2000 psi (13.8 MPa)
24 Hours
4000 psi (27.6 MPa)
7 Days
5000 psi (34.5 MPa)
28 Days
6500 psi (44.8 MPa)
Flowable
2500 psi (17.2 MPa)
4500 psi (31.0 MPa)
5500 psi (37.9 MPa)
7500 psi (51.7 MPa)
Plastic
3000 psi (20.7 MPa)
5000 psi (34.5 MPa)
6000 psi (41.3 MPa)
8000 psi (55.1 MPa)
Exceeds the requirements of ASTM C 928 R-3 and ASTM C 1107.
NON-SHRINK PRECISION GROUT
High strength, non-metallic, non-shrink grout designed for
precision grouting and general construction applications. Can be
mixed to a plastic, flowable or fluid consistency.
Use For:
• Grouting heavy equipment, pre-cast concrete, bearing plates,
steel columns and anchoring applications
Item No.
Package Size
Metric
Quantity
1585-00
50 lb. bag
22.7 kg
64/pallet
1585-00
50 lb. bag
22.7 kg
35/mini pallet
Compressive Strength at 28 Days
Plastic
14,000 psi 96.5 MPa
Flowable
12,000 psi 86.2 MPa
Fluid
8,000 psi 55.2 MPa
Meets the requirements of ASTM C 1107 and Army Corp. of Engineers
CRD 621
January 2003 Introduces current
QUIKRETE® logo & new packaging
13
May 2003 Runs national TV ad
featuring Concrete Resurfacer
January 2006 Introduces Veneer
Stone Mortar & FastSet DOT Mix
Construction & RESTORATION Products
NON-SHRINK GENERAL
PURPOSE GROUT
High strength, non-metallic Portland cement based
grout including expansive additives. Can be mixed to a
plastic, flowable or fluid consistency.
Use For:
Item No.
Package Size
Metric
Quantity
• Grouting, anchoring and general construction applications
1585-01
50 lb. bag
22.7 kg
64/pallet
Package Size
Metric
Quantity
80 lb. bag
36.2 kg
42/pallet
80 lb. bag
36.2 kg
42/pallet
Item No.
Package Size
Metric
Quantity
1228-80
50 lb. bag
22.7 kg
64/pallet
1229-81
80 lb. bag
36.2 kg
42/pallet
50 lb. bag
22.7 kg
64/pallet
Compressive Strength at 28 Days
Plastic
10,000 psi 68.9 MPa
Flowable
9,000 psi 62.1 MPa
Fluid
8,000 psi 55.2 MPa
Meets the requirements of ASTM C 1107 and Army Corp. of Engineers CRD 621, tested at 70˚F
FIBER-REINFORCED DECK MIX &
POLYMER MODIFIED
FIBER-REINFORCED DECK MIX
Item No.
Fiber-Reinf
• Parking structures
• Loading docks
• Roads
1251-80
Poly-Mod
1251-81
• Bridge decks
• Balconies
• Industrial floors
SHOTCRETE MS &
SHOTCRETE MS-FIBER REINFORCED
Portland cement based structural repair material for making
repairs to horizontal, vertical or overhead surfaces. The micro
silica enhanced formulation provides high adhesion and very
low rebound and permeability characteristics. Shotcrete MS
is available in alkali-resistant fiberglass fiber, polypropylene
fiber or steel fiber formulations.
Use for construction and repair of:
Fiber-Reinf
1228-51
• Tunnels
• Slope stabilization
• Foundations
• Bridge columns & beams• Walls
• Structural concrete line
Also available in 3000 lb. bulk bags.
* Achieves 9000 PSI (MPa) at 28 days when field applied
CONSTRUCTION & RESTORATION PRODUCTS
Portland cement based, high-early strength 6000 PSI
concrete mix.
The fiber-reinforced and air-entrained
formation provides improved freeze/thaw durability and crack
resistance and contains an integral corrosion inhibitor.
Use for:
ARCHITECTURAL FINISH
Polymer modified, Portland cement based repair material
designed to make smooth repairs to surface defects such as
honey combs, bug-holes, spalls and chips.
Use For:
• Tilt-up wall panels
• Pre-cast concrete
Item No.
Package Size
Metric
Quantity
1220-55
40 lb. bag
18.1 kg
80/pallet
• Poured concrete
• Masonry surfaces
FORM & POUR
High-flow, high-strength concrete mix designed for structural
repairs to bridge, parking structures, tunnels, dams, concrete
walls, industrial floors and filling voids in concrete. The
material is air entrained (5-7%) and achieves a compressive
strength of 6500 psi when poured at a 7”-9” in slump and
8000 PSI when poured in a 4”-5” slump
January 2007 Introduces
PowerLoc™ Jointing Sand
Item No.
Package Size
Metric
Quantity
808100-65
80 lb. bag
36.2 kg
42/pallet
March 2008 Introduces Concrete
Patching Compound & Countertop Mix
2008
14
80th Plant
DOT REPAIR MATERIALS
FASTSET DOT MIX &
FASTSET DOT MIX - EXTENDED
For structural concrete repair of bridge decks, roadways &
parking decks from 1/2” to 24” thick. Can be extended with
up to 25 lb. of 3/8” stone or gravel with a top size of up to
1/2” for patched over 2” thick. Also available in pre-extended
formulas (No. 1244-80).
Use for anchoring & grouting:
• Structural concrete repair
• Roadways
Compressive Strength ASTM C 109
1½ Hours 3000 psi
20.7 MPa
3 Hours
4500 psi
31.0 MPa
24 Hours
6500 psi
44.8 MPa
7 Days
8000 psi
55.1 MPa
28 Days
10,000 psi 69.0 MPa
Package Size
Metric
Quantity
1244-56
55 lb. bag
25.0 kg
64/pallet
80 lb. bag
36.2 kg
42/pallet
Extended
• Bridge decks
• Parking deck applications
1244-80
Exceeds the requirements of ASTM C 928 R-3
Exceeds DOT region 3 requirements for exposure to de-icing chemicals
RAPID ROAD REPAIR® &
RAPID ROAD REPAIR® - EXTENDED
Fast-setting, rapid-hardening structural repair mortar,
designed to make pavement repairs to concrete pavement.
Alkali-resistant fiber reinforced for improved flexural
performance. Available in pre-extended formula (No. 124280)
Use For Repairing:
• Highways
• Concrete footings
Item No.
• Bridge decks
• Parking garages
Item No.
Package Size
Metric
Quantity
1242-51
50 lb. bag
22.7 kg
64/pallet
80 lb. bag
36.2 kg
42/pallet
Extended
1242-80
Exceeds: 3000 psi (20.7 MPa) at 1 hour
8300 psi (57.5 MPa) at 28 days
Exceeds the requirements of ASTM C 928 R-3
• Runways
• Driveways
RAPID ROAD REPAIR® - EXTENDED
TYPICAL COMPRESSIVE STRENGTH ASTM C 109
RAPID ROAD REPAIR®
TYPICAL COMPRESSIVE STRENGTH ASTM C 109
TIME
PSI
TIME
PSI
1 HOUR
3000 PSI (20.7 MPa)
90 MINUTES
2000 PSI (13.8 MPa)
3 HOURS
3400 PSI (23.4 MPa)
24 HOURS
4000 PSI (27.6 MPa)
24 HOURS
5000 PSI (35.9 MPa)
7 DAYS
5500 PSI (37.9 MPa)
7 DAYS
8100 PSI (55.9 MPa)
28 DAYS
6000 PSI (41.4 MPa)
28 DAYS
8370 PSI (57.7 MPa)
DOT REPAIR MATERIALS
RIP RAP
Commercial grade blend of Portland cement and specially
graded sand, packaged in a fiber reinforced, biodegradable
bag for erosion control applications. Requires no mixing or
equipment to install. The free-form construction method also
allows for the elimination of forming and finishing procedures
and is ideal for remote and accessible locations.
Use For:
• Slopes
• Riverbanks • Beaches
• Bulkheads • Embankments • Dams
• Seawalls
• Revetment • Canals
• Lake fronts
• Culverts
January 2009 Introduces
Base Coat Stucco - Pump Grade
January 2009 Publishes Guide To
Concrete, Masonry & Stucco Projects
GUIDE TO
CONCRETE
MASONRY & STUCCO PROJECTS
15
STUCCO
MASONRY
REPAIR
Item No.
Package Size
Quantity
1129-60
1129-80
SCRIM
1134-80
BURLAP
1129-60
POLY
1129-62
60 lb. bag
80 lb. bag
56/pallet
42/pallet
80 lb. bag
42/pallet
60 lb. bag
56/pallet
60 lb. bag
56/pallet
January 2010 Introduces
Hardscapes by QUIKRETE®
STUCCO PRODUCTS
An alkali resistant fiberglass reinforced stucco designed for
use in one-coat stucco applications. Available in a sanded
version requiring only the addition of water or a concentrated
version which requires the addition of clean plaster sand and
water.
Features& benefits include:
• Crack resistant formula
• Extended board life
• 1 hour fire rating over plywood or OSB & EPS foam when applied
in accordance with ICC ESR-1240
• Superior workability
Package Size
Metric
Quantity
80 lb. bag
36.2 kg
42/pallet
1216-80
80 lb. bag
36.2 kg
42/pallet
1216-93
90 lb. bag
40.8 kg
35/pallet
Item No.
Sanded
1200-80
Concentrated
BASE COAT STUCCO
A Portland cement based stucco used for construction and
repair of stucco walls. Available in Extended Board- Life
formulation.
Use For:
• Scratch and brown coat in a three coat stucco application
• Apply directly to masonry walls in a two coat stucco application
• Superior workability
Item No.
Package Size
Metric
Quantity
1139-81
50 lb. bag
22.7 kg
56/pallet
1139-80
80 lb. bag
36.2 kg
42/pallet
Ext. Board
1139-87
80 lb. bag
36.2 kg
42/pallet
STUCCO PRODUCTS
ONE COAT FIBERGLASS REINFORCED
STUCCO
Meets the requirements of ASTM C 926 for cement based plaster
BASE COAT STUCCO-PUMP GRADE
A fiber reinforced contractor grade pre-blended Portland
cement based scratch and brown coat stucco mix.
Use For:
• Scratch and brown coat in a three coat stucco application
• Apply directly to masonry walls in a two coat stucco application
• May be spray or trowel applied
Item No.
Package Size
Metric
Quantity
1139-86
80 lb. bag
36.2 kg
42/pallet
Item No.
Package Size
Metric
Quantity
1139-89
80 lb. bag
36.2 kg
42/pallet
Exceeds the requirements of ASTM C 926 for Portland cement based
plaster
BASE COAT STUCCO with WATER-STOP
An exterior stucco with Water-Stop additive, used for the
construction and repair of stucco walls. The Water-Stop,
waterproofing additive prevents moisture penetration from
wind driven rain.
Use For:
• Scratch and brown coat in a three coat stucco application
• Apply directly to masonry walls in a two coat stucco application
Meets the requirements of ASTM C 926 requirements for cement
based plaster.
Item No.
Package Size
Metric
Quantity
White
1201-80
80 lb. bag
36.2 kg
42/pallet
1201-80
80 lb. bag
36.2 kg
24/mini pallet
1201-91
90 lb. bag
40.8 kg
35/pallet
Gray
1202-80
80 lb. bag
36.2 kg
42/pallet
1202-80
80 lb. bag
36.2 kg
24/mini pallet
90 lb. (40.5 kg) Finish Coat Stucco Available Regionally
1201-92
90 lb. bag
40.8 kg
35/pallet
QUIKWALL® SURFACE BONDING CEMENT
Item No.
Package Size
Metric
Quantity
1230-50
50 lb. bag
22.7 kg
64/pallet
1230-50
50 lb. bag
22.7 kg
35/mini pallet
1231-50
50 lb. bag
22.7 kg
64/pallet
1231-50
50 lb. bag
22.7 kg
35/mini pallet
50 lb. bag
22.7 kg
64/pallet
FINISH COAT STUCCO
A stucco finishing plaster designed for use as a color and
texture coat over Portland cement base coat or QUIKRETE®
Fiberglass Reinforced Stucco. Requires only the addition of
water. Available in white or gray. Color can be added using
QUIKRETE® Stucco & Mortar Color.
Use For:
• A decorative color and texture finish coat for stucco
An alkali resistant fiberglass reinforced, Portland cement
based surface bonding cement used for construction of drystack (without mortar) cement block walls. Add color with
QUIKRETE® Stucco & Mortar Color. Use For:
• Waterproofing and strengthening block walls without mortar
• Rehabilitating existing walls with a water-resistant & decorative
coating
• Construction of structural and non-structural walls
Gray
Unsanded
1220-50
Meets the requirements of ASTM C 887
PRE-MIXED STUCCO PATCH
Ready-to-use acrylic latex formula for making repairs to
cracks, breaks and holes up to ¼” thick in stucco surfaces.
• Dries to a durable and flexible finish
• Sanded formula blends with the texture of surrounding stucco
January 2010 QUIKRETE® celebrates
70th Anniversary with Rose Parade Float
White
2010
Item No.
Package Size
Metric
Quantity
8650-32
1 qt. pail
.95 L
24/case
January 2011 Introduces
QR Codes & full-color project photos
featured on QUIKRETE® Repair Products
16
90th Plant
SANDS & AGGREGATES
PREMIUM PLAY SAND®
Specially graded fine sand that has been washed, dried and
screened.
Use For:
• Children’s sand boxes
Item No.
Package Size
Metric
Quantity
1113-51
50 lb. bag
22.7 kg
56/pallet
• Molding and building
ALL-PURPOSE SAND
Washed, properly graded coarse sand with multiple uses.
Use For:
• Underlayment for brick pavers and flagstone
• Increasing traction on snow and ice
• Mixing with potting soil or for use in other garden applications
• Mixing with Portland cement and gravel to make concrete mix
Meets ASTM C 33 specifications
Item No.
Package Size
Metric
Quantity
1152-51
50 lb. bag
22.7 kg
56/pallet
1152-70
70 lb. bag
31.7 kg
42/pallet
60 lb. bag
27.2 kg
56/pallet
Poly-woven
1152-60
ALL-PURPOSE GRAVEL
Multi-use product for a variety of decorative and landscaping
applications. Also for making concrete. Washed, properly
graded gravel.
Use For:
Item No.
Package Size
Metric
Quantity
1151-50
50 lb. bag
22.7 kg
56/pallet
SANDS & AGGREGATES
• Landscaping, gardening, patios, tree wells, walks, rooftops,
fish ponds and aquariums
• Mix with Portland cement & all purpose sand to make concrete mix
Meets ASTM C 33 specifications.
POWERLOC® JOINTING SAND
A polymer-modified graded sand for filling between
interlocking pavers, brick, patio blocks and concrete slabs up
to 1/2” (12.7 mm) wide. Once swept into the paver joints &
dampened with a water mist it hardens, locking pavers into
place. Also available in a dark color.
Features & benefits include:
• Resists erosion
• Stabilizes pavers
• Non-staining
Item No.
Package Size
Metric
Quantity
1150-47
50 lb. bag
22.7 kg
56/pallet
50 lb. bag
22.7 kg
56/pallet
Dark
1150-37
• Contains safe organic binder
• Resists weed growth & insects
• Environmentally friendly
PATIO PAVER BASE SAND
Underlayment base sand used to provide a firm, stable base,
for interlocking pavers, flagstone, brick and patio block.
Use For:
• Driveways
• Walkways Item No.
Package Size
Metric
Quantity
1150-49
50 lb. bag
22.7 kg
56/pallet
Item No.
Package Size
Metric
Quantity
1150-59
50 lb. bag
22.7 kg
56/pallet
Package Size
Metric
Quantity
50 lb. bag
100 lb. bag
22.7 kg
45.4 kg
56/pallet
30/pallet
50 lb. bag
100 lb. bag
22.7 kg
45.4 kg
56/pallet
30/pallet
50 lb. bag
100 lb. bag
22.7 kg
45.4 kg
56/pallet
30/pallet
• Patios
PATIO PAVER JOINTING SAND
Properly graded fine sand for filling joints between
interlocking pavers, flagstone, brick & patio block.
Use For:
• Driveways
• Walkways COMMERCIAL GRADE SAND
• Patios
Consistently graded washed and kiln dried sand with multiple
industrial and construction applications.
Use For:
• Underlayment for brick pavers and flagstone
• Epoxy and industrial coatings
• Specialized cement mixes
June 2011 Introduces project how-to videos,
establishes social media presence
on Facebook & Twitter
17
Item No.
Fine
1961-52
1961-02
Medium
1962-51
1962-01
Coarse
1963-03
1963-01
January 2012 Introduces
polyurethane sealants,
Zip & Mix™ Repair Mortar & anchoring epoxies
September 2013 Introduces
QUIKRETE®
Concrete Coatings
SANDS & AGGREGATES
POOL FILTER SAND
Properly graded clean silica sand.
Use For:
Item No.
Package Size
Metric
Quantity
1153-50
50 lb. bag
22.7 kg
56/pallet
A washed, properly graded, fine masonry sand. Use for:
Item No.
Package Size
Metric
Quantity
• Mix with QUIKRETE® Portland Cement & Hydrated Lime or
QUIKRETE® Masonry Cement to make Mortar Mix
• Fill joints between patio pavers, bricks or stone
• Mix with potting soil or use for other garden applications
1961-56
50 lb. bag
22.7 kg
56/pallet
A washed, properly graded, coarse plaster sand. Use for:
Item No.
Package Size
Metric
Quantity
• Mix with QUIKRETE® Portland Cement & Hydrated Lime - Type
S or with QUIKRETE® Plastic Cement to make Base Coat Stucco
• Mix with potting soil or use for other garden applications
1152-58
50 lb. bag
22.7 kg
56/pallet
Item No.
Package Size
Metric
Quantity
1954-00
50 lb. bag
22.7 kg
56/pallet
• Swimming pool filtration systems
• 20/40 gradation
MASON SAND
Meets ASTM C 897 specifications
Contains approx. 1/2 cu. ft. (14.2 L) of sand by volume
ATHLETIC FIELD MARKER
Pulverized white limestone or marble used for marking
athletic fields.
SANDS & AGGREGATES
WASHED PLASTER SAND
LIME PRODUCTS
HYDRATED LIME - TYPE S
For use in building construction. Can be mixed with Portland
cement and other ingredients to make mortar mix and base
coat stucco.
Meets the requirements of ASTM C 207, Type S Hydrated Lime for
masonry purposes
AGRICULTURAL LIME
Calcium Carbonate used to neutralize soil acidity
Item No.
Package Size
Metric
Quantity
9907-53
50 lb. bag
22.7 kg
50/pallet
Item No.
Package Size
Metric
Quantity
1111-50
50 lb. bag
22.7 kg
56/pallet
Available Regionally
February 2015 Introduces
Q•MAX PRO Concrete Mix
March 2015 Introduces
QUIKRETE® Mobile App
18
STONES, PEBBLES & ROCK
STONES, PEBBLES & ROCK
Stone, pebbles and rocks for landscaping.
Use for:
• Controlling erosion
• Resisting decay
• Decorative features
1175-00
Metric
Quantity
0.5 cu. ft.
.014 cu. m
63/pallet
0.5 cu. ft.
.014 cu. m
63/pallet
0.5 cu. ft.
.014 cu. m
63/pallet
0.5 cu. ft.
.014 cu. m
63/pallet
0.5 cu. ft.
.014 cu. m
63/pallet
0.5 cu. ft.
.014 cu. m
63/pallet
Red Lava Rock
1175-05
Quantity Calculators
Bilingual
Product Descriptions
Heavy Duty Bags
Size 0.5 cu. ft.
UV Resistant
Pea Pebbles
1175-10
River Pebbles
1175-15
All-Purpose Stone
1175-20
Rock varieties:
• Red Lava Rock
• Pond Pebbles
• Marble Chips • River Pebbles
Package Size
Marble Chips
Packaging elements:
•
•
•
•
•
•
Item No.
• Crushed Rock • All-Purpose Stone • Pea Pebbles
Pond Pebbles
1175-25
STABILIZING SAND
POLYMERIC JOINTING SAND
A polymer-modified graded sand for filling joints up to
2” wide between interlocking pavers, brick, natural stone
and concrete slabs. Once swept into the paver joints &
dampened with a water mist it hardens, locking pavers
into place.
Features & benefits include:
• Resists erosion
• Resists weed growth & insects
• Commercial or Residential Use
Item No.
Package Size
Metric
Quantity
1175-56
50 lb. bag
22.7 kg
64/pallet
• Stabilizes pavers
SPECIALTY SANDS
PAVER BASE
Paver base provides a firm, stable foundation for
interlocking pavers, flagstone, bricks or patio block. Use
as a base for:
• Pavers • Concrete slabs
Item No.
Package Size
Metric
Quantity
1175-45
0.5 cu. ft.
.014 cu. m
63/pallet
Item No.
Package Size
Metric
Quantity
1175-40
0.5 cu. ft.
.014 cu. m
63/pallet
Item No.
Package Size
Metric
Quantity
1175-50
0.5 cu. ft.
.014 cu. m
63/pallet
Item No.
Package Size
Metric
Quantity
1175-35
0.5 cu. ft.
.014 cu. m
63/pallet
• Walkways
PAVER SAND
A properly graded fine sand used to fill joints between
interlocking pavers, flagstone, bricks or patio block.
Use or:
• Patios
• Walkways
• Driveways
PLAY SAND
Specially graded washed sand.
Ideal for:
• Childrens’ sand boxes
• Safe surface for playground
• Molding
ALL-PURPOSE SAND
Washed, properly graded coarse sand with multiple
uses including, paver underlayment, soil and garden
applications and mixing with cement.
Ideal for:
• Pavers
• Mixing with cement
19
• Soil & garden
UNDERLAYMENTS & THINSET
Self-finishing interior floor topping and underlayment
specially formulated to produce a smooth surface ready
for the installation of ceramic tile, resilient flooring or other
finishes. No troweling required. Use for:
• Resurfacing existing concrete floors with damaged finishes
• Over new concrete floors & pre-cast slabs w/unacceptable finishes
Fast-Setting formula exceeds:
1,800 psi (12.4 MPa) in 24 hours
4,000 psi (27.6 MPa) in 7 days
5,500 psi (37.9 MPa) in 28 days.
Item No.
Package Size
Metric
Quantity
50 lb. bag
22.7 kg
64/pallet
50 lb. bag
22.7 kg
64/pallet
Fast-Setting
1249-51
Regular
1249-50
Regular formula exceeds:
1,000 psi (6.9 MPa) in 7 days
2,000 psi (13.8 MPa) in 28 days.
THIN SET SANDED
UNDERLAYMENTS & THINSET
FAST-SETTING SELF-LEVELING
FLOOR RESURFACER &
SELF-LEVELING FLOOR RESURFACER
A Portland cement based thin set for setting absorptive & nonabsorptive tile on walls and floors. Addition of Acrylic Fortifier
is recommended.
Apply over:
• Concrete
• Concrete block
• Cementicious backer board
• Wall board
• Portland cement plaster
• Plywood expanded metal lath
Meets the requirements of ANSI A 118-1
Item No.
Package Size
Metric
Quantity
1547-50
50 lb. bag
22.7 kg
63/pallet
Item No.
Package Size
Metric
Quantity
1547-51
50 lb. bag
22.7 kg
63/pallet
THIN SET SANDED - WHITE
A white Portland cement based thin set for setting absorptive
& non-absorptive tile on walls and floors. Addition of Acrylic
Fortifier is recommended.
Apply over:
• Concrete
• Concrete block
• Cementicious backer board
• Wall board
• Portland cement plaster
• Plywood expanded metal lath
Meets the requirements of ANSI A 118-1
MULTI-PURPOSE THIN SET
A polymer modified, Portland cement based thin set used
for setting ceramic tile and natural stone such as marble
or granite and saltillo tile on walls and floors. Requires no
additional latex or fortifiers. Available in gray and white.
Apply over:
• Plywood
• Concrete
• Cementicious backer units
• Concrete block
• Portland cement plaster
• Wall boards
Meets the requirements of ANSI A 118-1 and ANSI A 118.4.
FLOOR MUD
Portland cement based underlayment mortar designed for
leveling travertine, slate and marble floor tile, and for shower
pan applications
WALL FLOAT
Portland cement based leveling mortar for vertical applications
of tile, marble and brick veneer. Addition of Acrylic Fortifier or
Concrete Bonding Adhesive is recommended.
Item No.
Package Size
Metric
Quantity
50 lb. bag
22.7 kg
63/pallet
50 lb. bag
22.7 kg
63/pallet
Gray
1550-49
White
1550-50
Item No.
Package Size
Quantity
1548-81
60 lb. bag
56/pallet
1548-82
80 lb. bag
42/pallet
Item No.
Package Size
Quantity
153-50
50 lb. bag
65/pallet
153-76
75 lb. bag
48/pallet
20
BLACKTOP PRODUCTS
COMMERCIAL GRADE
PERMANENT BLACKTOP REPAIR
High performance asphalt cold patch specially formulated
for permanent repairs to potholes and cracks over 1 inch
(25 mm) wide in asphalt pavement. DOT Approved formula.
Stays pliable in cold weather applications.
• Use all-year-round in wet or dry conditions
• Can be used in hot or cold weather
• Provides superior bond strength
• Does not require heating or mixing, pour directly out of bag
• Can be formed and compacted
• Patched area is ready for immediate use
• Very Low VOC formula - Meets all state requirements
Item No.
Package Size
Metric
Quantity
1701-59
50 lb. bag
22.7 kg
63/pallet
ASPHALT COLD PATCH 90% RECYCLED MATERIALS
High performance cold patch containing recycled
materials and special binder additives. Environmentally
friendly formula permanently bonds to surrounding asphalt
pavement. Available Regionally
Other features & benefits include:
Item No.
Package Size
Metric
Quantity
1701-58
50 lb. bag
22.7 kg
63/pallet
• No odor/very low VOC
• Repair area is ready for immediate use
• No heating or mixing required
Meets Air Quality Standards of AQMD Rule 1108
BLACKTOP PRODUCTS
BLACKTOP REPAIR
A weather-resistant crack-filler, provides excellent adhesion
and minimal shrinkage. Helps prevent water and ice damage
to blacktop surfaces. Dries to a textured black finish.
Non-flammable. Very Low VOC formula - Meets all state
requirements.
Use For:
Item No.
Package Size
Metric
Quantity
8630-15
5.5 oz. tube
163 mL
12/case
8630-10
10 oz. tube
300 mL
12/case
Item No.
Package Size
Metric
Quantity
8640-05
1 qt. bottle
946 mL
12/case
8640-06
1 gal. bottle
3.8 L
4/case
• Repairing cracks in blacktop and asphalt surfaces
including driveways, roofs and chimney flashings
BLACKTOP CRACK SEAL
A uniformly blended latex emulsion, specifically designed
to adhere to asphalt and concrete surfaces. No mixing is
required. Just pour from the bottle. Black color blends with
surrounding surface.
Use For:
• Repairing cracks in blacktop and asphalt surfaces
21
DECORATIVE CONCRETE STAINS
Package Size
Metric
Quantity
1 Gallon
3.8 L
4/case
1 Gallon
3.8 L
4/case
1 Gallon
3.8 L
4/case
1 Gallon
3.8 L
4/case
1 Gallon
3.8 L
4/case
1 Gallon
3.8 L
4/case
1 Gallon
3.8 L
4/case
7215-06
1 Gallon
3.8 L
4/case
Item No.
Package Size
Metric
Quantity
1 Gallon
3.8 L
4/case
1 Gallon
3.8 L
4/case
1 Gallon
3.8 L
4/case
1 Gallon
3.8 L
4/case
Item No.
Red
7215-00
TRANSLUCENT CONCRETE STAINS
Semi-translucent appearance highlights the natural variations in
concrete and masonry surfaces. Translucent Concrete Stain can be
used in multiple color combinations to achieve a unique multi-tone,
layered appearance.
Terra Cotta
• Does not peel
• Interior or exterior use
• Low odor & Low VOC
• Water based, Polymer-Bonded, UV Resistant formula
• Matte finish
• Ideal for garage floors, driveways, pool decks, sidewalks & patios
Light Brown
7215-01
Cola
7215-02
7215-04
Light Gray
7215-03
Blue
7215-05
Golden Wheat
7215-07
Brick Red
RED
TERRA COTTA
LT GRAY
BLUE
COLA
LT BROWN
GOLDEN WHEAT BRICK RED
PENETRATING CONCRETE STAINS
Opaque appearance provides deep, rich color that is highlighted by
the natural variations of concrete and masonry surfaces.
• Matte finish
• Penetrating Stain does not peel
• Low odor & Low VOC
• Water based, Polymer-Bonded, UV Resistant formula
• Interior or exterior use
• Ideal for floors, driveways, sidewalks & patios
Charcoal
7215-16
Gray
7215-15
Walnut Brown
7215-17
Burnt Orange
7215-18
GRAY
WALNUT
BROWN
BURNT
ORANGE
CONCRETE ETCHING STAINS
Item No.
Transforms plain concrete into a marble-like appearance with warm
earth tones and unique shading. The acid-based stainst react with the
cement as they penetrate the surface, creating a permanent effect.
Tan
• Use on new or existing concrete
• Interior or exterior use
• Permanently stains concrete in one step
• Creates unique, decorative, multi-toned appearance
• Ideal for interior rooms, patios, porches & driveways
7215-26
7215-25
Package Size
Metric
Quantity
1 Gallon
3.8 L
4/case
1 Gallon
3.8 L
4/case
1 Gallon
3.8 L
4/case
1 Gallon
3.8 L
4/case
1 Gallon
3.8 L
4/case
Coffee
Black
7215-27
English Red
7215-28
DECORATIVE CONCRETE COATINGS
CHARCOAL
Olive
7215-29
TAN
COFFEE
BLACK
ENGLISH
RED
OLIVE
22
SURFACE PREPARATION & CLEANERS
SURFACE PREPARATION & CLEANERS
CLEANER, ETCHER & DEGREASER
Surface preparation treatment for use prior to repairing, sealing or
staining concrete, paver and masonry surfaces
• Degreases, cleans oil and etches the surface
• Significantly improves adhesion of coatings and repair materials
• Concentrated formula
• Solvent-free, Low odor and Low VOC
CONCRETE & MASONRY COATINGS
Item No.
Package Size
Metric
Quantity
8675-34
1 Gallon
3.8 L
4/case
Item No.
Package Size
Metric
Quantity
8670-06
1 Gallon
3.8 L
4/case
Item No.
Package Size
Metric
Quantity
8675-33
1 Gallon
3.8 L
4/case
Item No.
Package Size
Metric
Quantity
8610-09
1 Gallon
3.8 L
4/case
8610-29
5 Gallon
18.9 L
each
Item No.
Gray
Package Size
Metric
Quantity
8730-06
1 Gallon
3.8 L
4/case
5 Gallon
3.8 L
Each
1 Gallon
3.8 L
4/case
5 Gallon
3.8 L
Each
1 Gallon
3.8 L
4/case
5 Gallon
3.8 L
Each
1 Gallon
3.8 L
4/case
5 Gallon
3.8 L
Each
OIL STAIN REMOVER
Removes oil stains and grease from concrete, paver and masonry
surfaces.
• Heavy duty cleaner
• Solvent-free formula
• Ideal for use on concrete, garage floors, driveways and patios
• Low odor and Low VOC
EFFLORESCENCE & RUST REMOVER
Removes efflorescence salts, rust and hard water deposits from
horizontal and vertical concrete, pavers, brick, masonry and stucco
• Use to remove efflorescence, rust and other stains from surface
• Ideal for use on concrete or paver patios and walkways, and
masonry or stucco walls
• Renews concrete, masonry and paver surfaces
• No scrubbing required
CONCRETE & MASONRY COATINGS
MASONRY WATERPROOFER
Beautifies and waterproofs porous concrete and masonry surfaces.
• Heavy duty resin technology delivers maximum adhesion and a
water-tight barrier
• Resists surface mold and mildew
• Ideal for basement walls, foundations and other porous surfaces
• Can be applied by roller or brush
• Ready-to-use
• Color: Bright White
TEXTURED ACRYLIC CONCRETE COATING
Textured acrylic coating provides a non-slip, new look finish to
concrete surfaces
• Provides a consistent color and new look finish to old worn
concrete surfaces
• Heavy duty resin technology provides superior adhesion to
concrete surfaces
• Ideal for steps, sidewalks, driveways and patios
• Ready-to-use
Gray
8730-07
Mocha
8730-36
Mocha
8730-37
Sedona Red
8730-16
Sedona Red
8730-17
Cool Gray
GRAY
23
MOCHA
SEDONA
RED
COOL
GRAY
8730-26
Cool Gray
8730-27
FLOOR COATINGS
GARAGE FLOOR COATING
An advanced formula, water-based epoxy formulated for long lasting
performance as a garage floor coating. Protects against oil, grease
and chemicals.
• Showroom high gloss finish with exceptional durability
• Superior adhesion eliminates hot tire pickup
• 1 car kit covers up to 250 sq ft
Item No.
Package Size
Gray
KIT
0703-57
120 fl oz
Tan
KIT
0703-58
120 fl oz
Metric
Quantity
3.6 L
EACH
3.6 L
EACH
Kit Includes:
• 2 part epoxy
• Cleaner, Etcher & Degreaser
• Application instructions
• Color flakes
• Stir stick
Gray
Tan
EPOXY HIGH-GLOSS COATING
Clear, advanced formula, water-based epoxy formulated for long
lasting performance as a garage floor protective coating. For use on
bare or coated concrete.
• Provides superior chemical resistance & durability
• High solids, clear protective coating
• One kit covers up to 500 sq ft of coated concrete
Item No.
0703-55
Package Size
KIT
120 fl oz
Metric
Quantity
3.6 L
EACH
Kit Includes:
• 2 part epoxy
• Stir stick
• Anti-Skid additive
• Application instructions
COLOR FLAKES
Add a custom touch to your Garage Floor Coating project. Available
for both Gray and Tan coatings, Color Flakes give depth to newly
coated surfaces.
• Custom appearance
• Available for Gray and Tan
• Add as little or as much as you like
Blue Blend added
to Gray Garage
Floor Coating
Tan Blend added
to Tan Garage
Floor Coating
FLOOR COATINGS
24
CONCRETE ACCESSORIES
CONCRETE ACCESSORIES
QUIK-TUBE® BUILDING FORMS
Rigid fiber building form tube eliminates the need to build
wood forms. Available regionally in 10 foot & 12 foot
lengths.
Use For:
• Mailbox bases
• Deck supports
• Columns
Item No.
Package Size
Metric
Quantity
6922-01
8 in. dia x 4 ft. h
20 cm x 1.2 m
36/tray
6922-02
10 in. dia x 4 ft. h
25.4 cm x 1.2 m
24/tray
6922-03
12 in. dia x 4 ft. h
30.5 cm x 1.2 m
18/tray
Item No.
Package Size
Metric
Quantity
6917-03
½ in. x 4 in x 5 ft.
12.7 mm x 1.5 m
40/carton
6917-04
½ in. x 4 in x 10 ft. 12.7 mm x 3 m
EXPANSION JOINT STRIPS
Expansion joint filler made from resilient cane fibers used
to prevent damage during expansion and contraction of
concrete. Weather resistant.
Use for:
40/carton
• Driveways, sidewalks and patios
• Between concrete slabs and to separate slabs from structures
Meets the requirements of ASTM D 1751
WALKMAKER BUILDING FORM COUNTRY STONE PATTERN
Reusable plastic mold in cobblestone pattern. Fill the mold
with 80 lbs. of Concrete Mix, trowel, and remove the mold.
For best results, use QUIKRETE® Crack Resistant Concrete.
Use For:
Item No.
Package Size
Metric
Quantity
6921-32
2 ft. x 2 ft.
.6 m x .6 m
12/case
Item No.
Package Size
Metric
Quantity
Brick Bond
6921-33
2 ft. x 2 ft.
.6 m x .6 m
12/case
Euro Block
6921-34
2 ft. x 2 ft.
.6 m x .6 m
12/case
Brick Weave
6921-35
2 ft. x 2 ft.
.6 m x .6 m
12/case
• Creating cobblestone patterned paths, patios, courtyards, etc.
• Add color to concrete mix with QUIKRETE® Liquid Cement
Color (No. 1317), available in Charcoal, Buff, Red, Brown, &
Terra Cotta
WALKMAKER BUILDING FORM • RUNNING BOND BRICK PATTERN
• EUROPEAN BLOCK PATTERN
• BASKET WEAVE PATTERN
Reusable plastic molds. Fill the mold with 80 lbs. of Concrete
Mix, trowel, and remove the mold. For best results, use
QUIKRETE® Crack Resistant Concrete.
Use For:
• Creating brick patterned paths, patios, courtyards, etc.
• Add color to concrete mix with QUIKRETE® Liquid Cement
Color (No. 1317), available in Charcoal, Buff, Red, Brown, &
Terra Cotta
GUIDE TO CONCRETE BOOK
The QUIKRETE® GUIDE TO CONCRETE book provides
practical instructions and clear step-by-step photos to help
accomplish the most popular projects and repairs made with
concrete, masonry and stucco products.
Other benefits and features include:
• Full color step-by-step project photography
• Detailed descriptions, quantity calculators and lists of tools
and materials needed for projects
• At-a-glance project information
• Helpful hints & insight designed to make projects run smoothly
from start to finish
• Free-standing counter display case
Item No.
Package Size
Quantity
6924-07
1 case
12/case
How to Build
a Double-w
ythe Brick
How
Wall, continued
to Build
a Conc
rete
Sidewalk
, contin
ued
How to Build a Glass Block Shower Wall, continued
6 n Cut a
half brick,
then
bed for a half
brick on top throw and furrow a
end of the
mortar
of the first
half
course. Butter
bed, creating brick, then set the half
the
brick
a 3/8" joint.
sure bricks
Cut away excess in the mortar
are plumb
mortar. Make
and level.
7 n Add more
bricks and
at the end
half bricks
until you
to both wythes
lay the first
course. Align
bricks
build corners, bricks with the reference in the fourth
lay
lines. Note:
wythes. Position a header brick at the
To
end of two
course perpendicuthe header brick
parallel
lar to the header in each subsequen
course (inset).
t
brick in the
previous
8 n Check
9 n Check the blocks with a level as you work to make
10 nthe
When
the first course is complete, fill any low
spacing
11n Lay down a half-thickness mortar bed for the
straightedg
sure each one is plumb, level, and aligned with the other
of joints
the end
spots
at the tops of the
e. Properly
with mortar.
bricksSet
the spacers
spaced bricks
third course, and then set the first panel anchor into the
blocks. Tap the blocks with the mallet or trowel handle
when
with
a
to youforplace
the next
course, then
9 n Every
lay form
a full a3/8"-thick
the straightedg
bed.
straightmortar
adjust them. You can set a flat board across several blocks
bricks. If bricks
30 minutes, mortar. Cut a length of glass block reinforcement track to
line
e over
Install are
thenot
second course
to smooth
of the stepped
checking your work
stop the
laying
span
out all the untooled
to check for level and make adjustments.
wall,
in alignment, block,
and and
bricks already
set it into the mortar, overlapping the
bricks
end
with aset.
level.
prepare
tool. Mortar
mortar
Try to compensatdo not move those
anchor
by joints
6". Add
joints should
the other half of the mortar over the
gradually as
with
a jointing
be smoothed
is thumbprint
you
e
install the next course of block.
(struck) and
slightly reducing fill in the middle (field) for the problem
hard. Do the wire and anchors,
when
vertical joints.
mortar
horizontal
bricks (step
or increasing
joints first,
Cut away any
9) by
the spacing
then the
joints using
between joints.
a trowel. When excess mortar pressed
Using Glass Block Spacers
from the
hard, brush
the mortar
any excess mortar
has set
from the brick but is not too
faces.
Metal wall
11n Lay
the remaining
called the closure
field bricks.
brick, should
The last brick,
Center the
be buttered
closure brick
bricks, then
between the at both ends.
set in place
with the trowel two adjoining
first three
courses of
handle. Fill
each
string up one
in the
course after wythe, moving the mason’s
completing
12 n Clean up the joints. When
each
thecourse.
mortar in the
lower courses is hard enough to resist light finger pressure
(typically within 30 minutes), twist off the T-spacer tabs
(inset photo) and pack mortar into the voids. Smooth the
joints with a glass block jointing tool. Fill in low spots with
mortar and remove excess and spilled mortar with a soft
brush or damp sponge, rinsing frequently.
tie
8 n Build
a curv
crown
ed scree
when
make
d boar
s this you smooth
easier.
d and
out the
use it
concr
to form
ete. Note:
A helpe a
r
12 n In the
into the mortarfourth course, embed
bed of one
metal wall
adjacent to
wythe and
it.
on top of the ties
courses. For Space the ties 2 to 3
ft. apart, every brick
added strength,
cavities between
three
set metal
the wythes
rebar into
and fill with
the
thin mortar.
9n
Smo oth
float.
The goal the conc
main
rete
is to
tain
surf ace
the slighsmooth it,
screed
board
t crow not to level with a wood
.
n creat
it
ed by (you shoul
the curve d
d
Control
n Contr
ol
12 n
bristle Crea te a
d
text ured
overla broom acros
,
pping
broom s the surfacnons kid surfa
marks
e once
ce
.
the surfac by draw
e is thum ing a c
bprin
th
Joints
allow joints are
for concr designed
contraction
ete expan to
, and move
sion,
ment
joints
.
a groov can be
ing tool. made
n Contr
ol
where joints tell the
during to crack as concrete
the harde
it shrink
which
s
ning
is
n Contr called hydra process,
tion.
ol joints
groov
made
ing tool
by a
mum
must
of
of the one-fourth be a minithe depth
deep slab (for exam
for a 4"ple, 1"
thick
n Contr
slab).
ol joint
Slab thickn
spaci
ess (in ng formula:
= joint
inche
s) x
feet). placement
For exam
interv 2.5
2.5 =
ple, 4" al (in
10
thick
n Keep ft.
x
as possithe slab
as squar
ble.
e
n Contr
ol
using
10 n Build
Line block
the
Stretch a mason’s opposite end of
the wall with
string between
the string.
the same methods
the two ends
Pull the string
as
to establish
the mason’s
until it is taut.
a flush, level the first using the chalk
string as a
Begin to fill
10 n
guide.
line between
lines as a reference.
in the field
ends—use
bricks (the
13 n Lay
concr Shap e the
bricks between
blocks
nline
Clean
as to
you
ete
go. As you complete each rowevery
remaining
secure
ends)13
(about 30 the
edge
after
on the first
courses, installing
n QUIKRETE®
the form by runni
thirdminutes
tooling
courseclean
the joints),
s of the
course.
ng an
GUIDE TO
usingand smooth the joints with a wet
tile setter’s
Check with
sponge,
CONCRETE
alignment,
edger
created s. Smoo
mason’s string metal ties
rinsing frequently. After the wall is complete, removefor
14 n Lay
and from
the cloudy residue
th
use a level
along
a furrowed
and level.
to make sure frequently
the blocks using a clean, dry cloth, and then buff with aplumb
Lift the by the edge out any
mortar
and place
piece of
scrap carpeting.
bed on
the wall is
a wall cap
leadi
r using mark s
theng
14 n Let the mortar
top course,
cure for spaces
at
of the
and provide on top and
float
a float.
wallslight
to coveredge of
least 24 hours, and then seal around
a finished
excess mortar.
the edge
appearance ly as empty
QUIK-TIP
you
the glass block wall(s) with silicone seallevel. Fill the Make sure the cap blocks . Remove
r
work.
any
joints between 14
are aligned
ant or non-sag polyurethane sealant.
cap blocks
and
Use a dry 4 x 4" piece of carpet to clean the glass block surface.
with
The carpet
n QUIK
Apply a sealant to the mortar joints,
mortar. u
will lift the cement without smearing.
RETE ®
if desired, following the manufacturer’s
GUID
E TO
Walls &
directions. u
Wall Finishes
CONC
82
n Full spacers help maintain joint spacing
where four glass blocks meet. To use spacers where blocks
adjoin a wall, ceiling, or curb, break off the side tabs, then trim
off two of the spacer legs to create T-spacers. For
the outside corners of a wall, trim off four legs to create L-spacers.
110
n QUIKRETE® GUIDE TO CONCRETE
n
Indoor Projects n
111
83
RETE
11 n
Cut cont
concr
rol joint
ete
but befor after the
s
e it harde concrete in the
sets up
ns.
uOpti
with a on: Apply
garde
acrylic
the need
n spray
cure and
er or roller
for
concr
ete for water curin
to eliminseal
a more
g
durab and to seal ate
le surfac
the
e.
14 n
Remove
at the
the f
sides
of the
walkw
Walk
w
25
WINTER PRODUCTS
ROCK SALT - Graded Coarse Natural Salt
Item No.
Package Size
Metric
Quantity
9002-25
25 lb. bag
11.3 kg
100/pallet
• For melting ice and snow on stairs sidewalks, driveways, etc.
9002-50
50 lb. bag
22.7 kg
56/pallet
9002-80
80 lb. bag
36.2 kg
30/pallet
Item No.
Package Size
Metric
Quantity
9004-80
50 lb. bag
22.7 kg
56/pallet
9004-79
25 lb. bag
11.3 kg
56/pallet
9004-83
50 lb. bag
22.7 kg
42/pallet
Use for:
ICE DEVIL & ICE DEVIL EF
Ice Devil®
• Melts ice down to -10˚ F (-23˚ C)
• Blended for quick melting results
• Residential & commercial use
• Contains MgCL and NaCL
Ice Devil® EF
• Melts ice down to 0˚ F (-18˚ C)
• Safer on landscaping
• Easier on concrete surfaces
• Contains KCL, liquid MgCL, & NaCL
• Contains color tracker
• Non-staining and non-tracking
EF
*Can be used before or during ice and snow storms to prevent excessive
bonding of ice and snow to concrete or pavement
Available Regionally
A dry, coarse sand, ideal for traction on all surfaces in icy
conditions.
Use For:
Item No.
Package Size
Metric
Quantity
1158-51
50 lb. bag
22.7 kg
56/pallet
Item No.
Package Size
Metric
Quantity
1159-60
60 lb. bag
27.2 kg
42/pallet
• Traction on icy and snow-covered surfaces
• Added vehicle weight
TUBE SAND
Tube-shaped bag fits along side rear axle, above wheel wells or
in bed of pick-up trucks.
Use For:
WINTER PRODUCTS
TRACTION SAND
• Traction and vehicle weight for winter driving conditions
• UV resistant woven-poly bag
26
The QUIKRETE® Companies continues to add manufacturing locations to better serve you with high performance products. With more
than 100 locations throughout The United States, Puerto Rico, Canada, Central and South America, The QUIKRETE® Companies is
unsurpassed in our ability to provide efficient and expedient delivery.
The QUIKRETE® Companies
3490 Piedmont Road, Suite 1300
Atlanta, GA 30305
800.282.5828
www.QUIKRETE.com
6943-99 (11/14)
Download PDF