USER MANUAL MUSICE CONTROLLER: RF 20m effective control

USER MANUAL
MUSICE CONTROLLER:
RF 20m effective control
Touching color chooser
Intelligent switch
Wake-up induction
20 main modes
Led backlight
15 music modes
The 3.5mm audio
SPECIFICATIONS:
Input voltage :DC12V~24V
Output power: Max 18A
Remote battery: AAA*2
Remote standby power consumption: 0.08mW
Remote operating power consumption 20mW
INSTRUCTION OF REMOTE BUTTONS:
1: On/pressing for 3 seconds to
to switch to white lighting
2: OFF
3: Color ring
4: Brightness control
5: Speed control
6: Set mode switch
7: Music mode switch
No.
1
GENERAL MODE
Mode
Note
Static Mode
Including
seven colors
No.
1
2
3
4
5
6
7
8
RGB Gradual
Seven Colors Gradual
Red Blink
Green Blink
Blue Blink
Yellow Blink
9
Purple Blink
9
10
11
12
13
14
Cyan Blink
White Blink
Red/Green Gradual
Red/Blue Gradual
Green/Blue Gradual
10
11
12
13
14
15
Seven Colors Blink
Speed
adjustable
2
3
4
5
6
7
8
MUSIC MODE
Mode
Note
Red
Green
Blue
Purple
Orange
Cyan
White
Seven Colors blink
Seven Colors
Gradual
Red Hopping
Green Hopping
Blue Hopping
Red/Green Gradual
Red/Blue Gradual
Green/Blue Gradual
Brightness/S
peed
changing
with music
Color/Bright
ness/Speed
changing
with music
Installation of RGB ROCK LIGHTS
.Installation: connect the central controller (the black box) to the battery and
connect the individual heads to the central controller by joining the plugs directly.
.Flexible Modes: Flash Speed, Flash Modes, Brightness, all can be changed
using the remote controller to make sure you have your most favorable unique
setting lighting kit.
.Music Sync: NO NEED extra connection, just place the mini microphone inside
the car and turn the light kit to
Music Mode. Then just have fun with the synchronized flashing lights full of party
feeling.
.Unique Appearance: You will be the center of anything at anywhere as soon as
you get them turned on.
The heads could be placed at anywhere you like under your car to create
state-of-art lighting effect.
.Guides for the remote controller:
1. Before we start, please connect the lights and then press the bottom right
buttons (both up and down buttons) on the remote controller and hold for 5
second to allow the controller sync with the lighting system.
2. On and Off button is on the top
3. Bottom left buttons control the brightness of the LEDs (up for brighter and down
for dimmer)
4. Second set of buttons control the flashing speed of the LEDs (up for faster and
down for slower)
5. Third set of buttons are used to change between different pre-set flashing
modes
6. The last buttons are to be used when you want music sync mode. Please make
sure you placed the microphone near the speaker before switching to this mode
4
Download PDF