MD461 OR
MD461OR Quick Reference Guide.indb i
2/17/12 10:45:58 AM
Manufacturer’s Recycling Information
Disposing of your old NEC product
The aim of recycling is to gain an environmental benefit by means of re-use, upgrading, reconditioning or reclamation of
material. Dedicated recycling sites ensure that environmentally harmful components are properly handled and securely
disposed. To ensure the best recycling of our products, NEC DISPLAY SOLUTIONS offers a variety of recycling procedures
and gives advice on how to handle the product in an environmentally sensitive way, once it has reached the end of its life.
All required information concerning the disposal of the product and country-specific information on recycling facilities can be
found on our following websites:
http://www.nec-display-solutions.com/greencompany/ (in Europe).
WEEE Mark (European Directive 2002/96/EC)
Within the European Union
EU-wide legislation, as implemented in each Member State, requires that waste electrical and electronic
products carrying the mark (left) must be disposed of separately from normal household waste. This includes
monitors and electrical accessories, such as signal cables or power cords. When you need to dispose of your
NEC display products, please follow the guidance of your local authority, or ask the shop where you purchased
the product, or if applicable, follow any agreements made between yourself and NEC.
The mark on electrical and electronic products only applies to the current European Union Member States.
Outside the European Union
If you wish to dispose of used electrical and electronic products outside the European Union, please contact your local authority
so as to comply with the correct disposal method.
MD461OR Quick Reference Guide.indb ii
2/17/12 10:45:59 AM
English
Index
Important Information ...................................................................................................................English-1
Warning, Caution ..........................................................................................................................English-1
Intended Use ................................................................................................................................English-2
Recommended use ......................................................................................................................English-3
Controls ........................................................................................................................................English-4
OSD (On-Screen-Display) ...........................................................................................................English-6
Specifications ...............................................................................................................................English-8
Important Information
WARNING
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT
USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE
PRONGS CAN BE FULLY INSERTED.
REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKET. TO
FULLY DISENGAGE THE POWER TO THE UNIT, PLEASE DISCONNECT THE POWER CORD FROM THE AC OUTLET.
DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
Power Cord Important Information
CAUTION: Please use the power cord provided with this monitor in accordance with the table below. If a power cord is not
supplied with this equipment, please contact your supplier. For all other cases, please use a power cord that matches the
AC voltage of the power outlet and has been approved by and complies with the safety standard of your particular country.
Plug Type
European Continental
U.K.
Country
EU (except U.K.)
U.K.
Voltage
230
230
Plug Shape
NOTE:
This product can only be serviced in the country where it was purchased.
Declaration
Declaration of the Manufacturer
Means of Conformity
Device Classification:
Class I, non-measuring function
Applicable Rules:
Annex IX, Rules 1.4 (Section 1)
and 1.1 (Section 3)
Product Name:
MD461OR
46" Operating Room Solution
Model Number:
MD461OR
UMDNS Code:
16-603
NEC Display Solutions Europe GmbH declares that the product
listed is in conformity with the essential requirements and
provisions of the Council Directive 93/42/EEC, including the
amendments of the Council Directive 2007/47/EC, and conforms
to the applicable clauses of the following standards:
– EN 60601-1
– EN 60601-1-2
– EN 61000-3-2
– EN 61000-3-3
NEC Display Solutions Europe GmbH
Landshuter Allee 12-14. 80637 Muenchen, Germany
English-1
MD461OR Quick Reference Guide.indb 1
2/17/12 10:46:00 AM
Intended Use
The MD461OR Operating Room Solution is intended to be used for review of medical images by trained physicians.
MD461OR cannot be used for a life-support system.
Safety Precaution
The unit is designed for exclusive interconnection with IEC60950 certified equipment outside of patient environment and IEC
60601-1 certified equipment inside the patient environment.
•
Equipment connected to digital interfaces must comply with the respective IEC standards (e.g. IEC 60950 for data
processing equipment and IEC 60601-1 for medical equipment).
•
This device complies with EN60601-1-2. To minimize the interference from other equipment, a minimum 0.5 m distance shall
be kept form other potential electromagnetic sources, such as a Cell Phone.
•
To reduce the risk of electric shock, make sure the power cord is unplugged from the wall socket. To fully disengage
the power to the unit, please disconnect the power cord from the ac outlet. Do not remove the front or back cover. No
user serviceable parts inside. Refer servicing to qualified service personnel. The AC outlet shall be readily available and
accessible.
European Customers
Unpacking, Installation and calibration of this monitor must only be done by authorized and trained personnel. Any installation
done by a non-authorized person is done under his own risk and we accept no responsibility in any device malfunctioning.
NOTE:
The MultiSync P462 User’s Manual, is an integral part of this product. For all items exceeding the scope of this
Quick Reference Guide, please refer to the MultiSync P462 User’s Manual.
English-2
MD461OR Quick Reference Guide.indb 2
2/17/12 10:46:00 AM
English
Recommended use
Safety Precautions and Maintenance
FOR OPTIMUM PERFORMANCE, PLEASE
NOTE THE FOLLOWING WHEN SETTING UP
AND USING THE LCD MONITOR:
WARNING: Do not modify this equipment without authorization of the manufacturer.
WARNING: To disconnect this product from the mains supply disconnect the mains plug from the socket outlet.
•
DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose
you to dangerous shock hazards or other risks. Refer all servicing to qualified service personnel.
•
Do not spill any liquids into the cabinet or use your monitor near water.
•
Do not place any heavy objects on the power cord. Damage to the cord may cause shock or fire.
•
Do not place this product on a sloping or unstable cart, stand or table, as the monitor may fall, causing serious damage to
the monitor.
•
The power supply cord you use must have been approved by and comply with the safety standards of your country.
•
In UK, use a BS-approved power cord with molded plug having a black (5A) fuse installed for use with this monitor.
•
Do not place any objects onto the monitor and do not use the monitor outdoors.
•
The lamps in this product contain mercury. Please dispose according to state, local or federal law.
•
Do not bend power cord.
•
Do not use monitor in high temperatured, humid, dusty, or oily areas.
•
Temperature controlled fans are implemented in this monitor. For reliable performance and long useful life of this product, it
is mandatory to not cover any vents on the monitor.
•
Vibration can damage the backlight. Do not install where the monitor will be exposed to continual vibration.
•
If monitor or LCD panel is broken, do not come in contact with the liquid crystal and handle with care.
•
To prevent damage to the LCD monitor caused by tipping over due to earthquakes or other shocks, make sure to install the
monitor in a stable location and take measures to prevent falling.
•
Please do not touch patient and this medical device at the same time.
Immediately turn off the power, unplug your monitor from the wall outlet and move to a safe location then refer servicing to qualified
service personnel under the following conditions. If the monitor is used in this condition, the monitor may cause fall, fire and electric
shock:
•
If the monitor has been wobbled.
•
If the monitor has an unusual odor.
•
When the power supply cord or plug is damaged.
•
If liquid has been spilled, or objects have fallen into the cabinet.
•
If the monitor has been exposed to rain or water.
•
If the monitor has been dropped or the cabinet damaged.
•
If the monitor does not operate normally by following operating instructions.
CAUTION
•
Allow adequate ventilation around the monitor so that heat can properly dissipate. Do not block ventilated
openings or place the monitor near a radiator or other heat sources. Do not put anything on top of monitor.
•
The power cable connector is the primary means of detaching the system from the power supply.
The monitor should be installed close to a power outlet which is easily accessible.
•
Handle with care when transporting. Save packaging for transporting.
•
Do not touch LCD panel surface while transporting, mounting and setting.
Applying pressure on the LCD panel can cause permanent damage.
After turning off the MD461OR, it is recommended to let them “cool down” for approximately 2 minutes.
This minimizes the risk of blowing a fuse in the medical transformer or tripping the wall outlet circuit breaker.
Image Persistence: When a residual or “ghost” image of a previous image remains visible on the screen, this is called image
persistence. Unlike CRT monitors, LCD monitors’ image persistence is not permanent, but constant images being displayed for
a long period of time should be avoided.
To alleviate image persistence, turn off the monitor for as long as the previous image was displayed. For example, if an image
was on the monitor for one hour and a residual image remains, the monitor should be turned off for one hour to erase the image.
NOTE: As with all display devices, NEC DISPLAY SOLUTIONS recommends using a moving screen saver at regular intervals
whenever the screen is idle or turning off the monitor when not in use.
English-3
MD461OR Quick Reference Guide.indb 3
2/17/12 10:46:00 AM
Controls (For further details, please refer to the MultiSync P462 User’s Manual)
Wireless Remote Controller
쐏 ASPECT button
Selects picture aspect, [FULL], [WIDE], [DYNAMIC], [1:1],
[ZOOM] and [NORMAL].
쐄 SOUND button
Artificial surround sound for internal/external speakers.
Audio out is disabled when surround is set to ON.
쐂 KEYPAD
Press buttons to set and change passwords, change channel
and set REMOTE ID.
쐆 ENT button*2
쐊 DISPLAY button
Turns on/off the information OSD.
쐎 MENU button
Turns on/off the menu mode.
쐅 AUTO SETUP button
Enters auto setup menu.
쐈 EXIT button
Returns to previous menu within OSD menu.
쐉 UP/DOWN button
button to move the highlighted area up or down
Acts as
to select adjustment items within OSD menu.
Small screen which adjusted “PIP” mode moves up or down.
쐃 POWER button
Switches the power on/standby.
쐇 INPUT button
Selects input signal.
DVI: DVI
DISPLAYPORT: DPORT
VGA: VGA
RGB/HV: RGB/HV
HDMI: HDMI
DVD/HD: DVD/HD, SCART
VIDEO: VIDEO1, VIDEO2
S-VIDEO: S-VIDEO
OPTION: Depends on your connection
쐋 PICTURE MODE button
Selects picture mode, [HIGHBRIGHT], [STANDARD],
[sRGB], [CINEMA], [AMBIENT1], [AMBIENT2].
HIGHBRIGHT: for moving images such as DVD.
STANDARD: for images.
sRGB: for text based images.
CINEMA: for movies.
AMBIENT1 and AMBIENT2: activate auto dimming
function.
씈 MINUS/PLUS (-/+) button
Increases or decreases the adjustment level within OSD
menu settings.
Small screen which adjusted “PIP” mode moves left or right.
씉 SET button
Makes selection.
씊 VOLUME UP/DOWN button
Increases or decreases audio output level.
씋 CH UP/DOWN button*2
씌 GUIDE button*2
씍 MUTE button
Turns on/off mute function.
씎 STILL button
ON/OFF button: Activates/deactivates still picture mode.
STILL CAPTURE button: Captures still picture.
English-4
MD461OR Quick Reference Guide.indb 4
2/17/12 10:46:01 AM
English
씏 PIP (Picture In Picture) button
ON/OFF button: Toggle switches between PIP, POP,
PICTURE BY PICTURE-ASPECT and PICTURE BY
PICTURE-FULL.
INPUT button: Selects the “picture in picture” input signal.
CHANGE button: Replaces to the main picture and sub
picture.
Main picture
Sub picture
DVI
DPORT
VGA
RGB/HV
HDMI
DVD/HD
SCART
VIDEO1
VIDEO2
S-VIDEO
DVI
No
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
DPORT
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
VGA
Yes
Yes
No
No
Yes
Yes
Yes
Yes
Yes
Yes
RGB/HV
Yes
Yes
No
No
Yes
No
No
Yes
No
Yes
HDMI
No
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
DVD/HD SCART VIDEO1 VIDEO2 S-VIDEO
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
No
No
Yes
No
Yes
No
No
No
No
No
Yes
No
No
No
No
No
No
No
No
No
Yes
No
No
No
No
REMOTE ID button
Activates REMOTE ID function.
MTS button*2
AUDIO INPUT button
Selects audio input source [IN1], [IN2], [IN3], [HDMI],
[OPTION]*1.
button
Activates closed captioning.
Note: VIDEO1, VIDEO2, S-VIDEO inputs only.
*1: The product you purchased may not have this feature.
*2: This button’s action depends on which option board you use.
Refer to the option board’s manual for further information.
English-5
MD461OR Quick Reference Guide.indb 5
2/17/12 10:46:01 AM
OSD (On-Screen-Display) (For further details, please refer to the MultiSync P462 User’s Manual)
NOTE:
Some functions may not be available depending on the model or optional equipment.
Input source
Main Menu Icons
Main Menu Item
70
50
50
50
50
50
Sub Menu
THANK YOU FOR SAVING
THE ENVIRONMENT.
CARBON FOOTPRINT
86.0 %
PICTURE MODE
Select
Adjustment Settings
Goto Adjustment
Return
Close
Key Guide
Press UP or DOWN
button to select
sub-menu.
Press SET.
Press UP or DOWN,
PLUS or MINUS to select
the function or setting to
be adjusted.
Press MENU or EXIT.
Press UP or DOWN
button to select.
Press INPUT button
to decide.
Press UP or DOWN, PLUS
or MINUS button to select.
Press EXIT
Remote Control
OSD screen
English-6
MD461OR Quick Reference Guide.indb 6
2/17/12 10:46:02 AM
Picture Aspect
The LCD monitor follows the VESA approved DPM Display
Power Management function.
The power management function is an energy saving
function that automatically reduces the power consumption
of the display when the keyboard or the mouse has not been
used for a fixed period.
The power management feature on your new display has
been set to the “ON” mode. This allows your display to
enter a Power Saving Mode when no signal is applied. This
could potentially increase the life and decrease the power
consumption of the display.
DVI, VGA, RGB/HV, DPORT
NOTE:
NOTE:
FULL
1:1
ZOOM
English
Using Power Management
NORMAL
HDMI, DVD/HD, SCART, VIDEO1, VIDEO2, S-VIDEO
FULL
WIDE
Aspect ratio
of image
Depending on the PC and video card used, this
function may not operate.
DYNAMIC
Unchanged view*3
4:3
1:1
ZOOM
NORMAL
Recommended selection
for picture aspect*3
NORMAL
DYNAMIC
It takes about 10 minutes for the monitor to go into
power management mode when using DVD/HD,
SCART, VIDEO1, VIDEO2 and S-VIDEO.
FULL
Squeeze
Selecting a video source
To view a video source:
WIDE
Use the input button to set [VIDEO1], [VIDEO2], [S-VIDEO].
Letterbox
Use the COLOR SYSTEM menu to set [AUTO], [NTSC],
[PAL], [SECAM], [PAL60], [4.43NTSC], according to your
video format.
*3 Grey areas indicate unused portions of the screen.
NORMAL: Displays the aspect ratio the same as it is sent
from the source.
FULL: Fills entire screen.
WIDE: Expands a 16:9 letter box signal to fill entire screen.
DYNAMIC: Expands a 4:3 pictures to fill the entire screen
with non-linearity. Some of the outside image area will be cut
off due to expansion.
1:1: Display the image in a 1 by 1 pixel format.
ZOOM
The image can be expanded beyond the active display area.
The image which is outside of active display area is not
shown.
ZOOM
ZOOM
English-7
MD461OR Quick Reference Guide.indb 7
2/17/12 10:46:02 AM
Specifications
Product Specifications
LCD Module
Pixel Pitch:
Resolution:
Color:
Brightness:
Contrast Ratio:
Frequency
46”/1168 mm diagonal
0.530 mm
1920 x 1080
Over 16 million colors (depending on video card used)
500 cd/m2 (Factory setting Typ.) @25°C
3500:1
Horizontal: 15.625/15.734 kHz, 31.5 kHz - 91.1 kHz (Analog Input)
31.5 kHz - 91.1 kHz (Digital Input)
Vertical: 50.0 - 85.0 Hz
Pixel Clock
25.2 MHz - 162.0 MHz
Viewable Size
1018.1 x 572.7 mm
Input Signal
DVI
Digital RGB
DVI (HDCP)
VGA60, SVGA60, XGA60, WXGA60, SXGA60, UXGA60*1, 1920X1080 (60Hz), 1080p, 1080i
DisplayPort DisplayPort Connector Digital RGB
DisplayPort Complies with Standard V1.1a, applicable to HDCP V1.3
VGA60, SVGA60, XGA60, WXGA60, SXGA60, UXGA60*1, 1920x1080 (60 Hz), 1080p, 720p
VGA
Analog RGB
0.7 Vp-p/75 ohm
VGA60, SVGA60, XGA60, WXGA60, SXGA60, UXGA60*1, 1920X1080 (60Hz)
Sync
Separate: TTL level (Pos./Neg.)
Composite sync on Green Video: 0.3 Vp-p Neg.
Analog RGB
0.7 Vp-p/75 ohm
VGA60, SVGA60, XGA60, WXGA60, SXGA60, UXGA60*1, 1920X1080 (60Hz)
Sync
Separate: TTL level (Pos./Neg.)
Composite sync on Green Video: 0.3 Vp-p Neg.
RGB/HV*2
DVI-D 24pin
15pin Mini D-sub
BNC (R,G,B,H,V)
HDMI
HDMI Connector
Digital YUV
Digital RGB
HDMI
VGA60, SVGA60, XGA60, WXGA60, SXGA60, UXGA60*1, 1920x1080 (60 Hz), 1080p, 1080i,
720p@50Hz/60Hz, 576p@50Hz, 480p@60Hz, 576i@50Hz, 480i@60Hz
DVD/HD*2
BNC X 3
Component
Y: 1.0 Vp-p/75ohm, Cb/Cr (Pb/Pr): 0.7 Vp-p/75 ohm
HDTV/DVD: 1080p, 1080i, 720p@50Hz/60Hz, 576p@50Hz, 480p@60Hz, 576i@50Hz, 480i@60Hz
VIDEO1
VIDEO2*2
BNC
BNC
Composite
1.0 Vp-p/75 ohm
NTSC/PAL/SECAM/4.43NTSC/PAL60
S-VIDEO
Mini DIN 4 pin
S-VIDEO
Y: 1.0 Vp-p/75 ohm C: 0.286 Vp-p/75 ohm (NTSC), 0.3 Vp-p/75 ohm (PAL/SECAM)
NTSC/PAL/SECAM/4.43NTSC/PAL60
DVI-D 24pin
Digital RGB
DVI (HDCP)
Output Signal
DVI
DisplayPort DisplayPort Connector Digital RGB
DisplayPort Complies with Standard V1.1a, applicable to HDCP V1.3
VIDEO1
1.0 Vp-p with 75 ohm terminated
BNC
Composite
AUDIO
AUDIO
Input
AUDIO
Output
RCA (L/R)
Analog Audio
STEREO Mini Jack X2
Stereo L/R 0.5 Vrms
HDMI Connector
Digital Audio
PCM 32, 44.1, 48 KHz (16/20/24bit)
STEREO Mini Jack
Analog Audio
Stereo L/R 0.5 Vrms
Speaker Output
Control
Power Supply
Internal Speaker 10W + 10W
RS-232C In:
RS-232C Out:
LAN:
Remote IN:
Remote OUT:
9 Pin D-sub
9 Pin D-sub (with daisy chain)
RJ-45 10/100 BASE-T
Stereo Mini jack 3.5
Stereo Mini jack 3.5
1.25 A @ 240V AC, 50/60Hz
Operational Environment
Temperature: 5 - 30°C / 41 - 86°F (Default brightness)
Humidity: 20 - 80% (without condensation)
Storage Environment
Temperature: -20 - 60°C / -4 - 140°F
Humidity: 10 - 90% (without condensation) / 90% - 3.5% x (Temp - 40°C) regarding over 40°C
Dimension
1153 (W) x 820 (H) x 180 (D) mm / 45.4 (W) x 32.3 (H) x 7.1 (D) inches
Weight
Ca. 65 kg (143.3 lbs)
Power Management
VESA DPM
Plug & Play
VESA DDC2B, DDC/CI, DisplayPort
IP Grade
IP55 Front Side / IP21 Overall
NOTE: Technical specifications are subject to change without notice.
*1: Compressed image
*2: Common terminal
English-8
MD461OR Quick Reference Guide.indb 8
2/17/12 10:46:03 AM
NEC Display Solutions Europe GmbH
Landshuter Allee 12-14
D-80637 Muenchen
Germany
Phone: +49 89 99699 0
Fax:
+49 89 99699 500
1st Edition, February 2012
Printed on recycled paper
MD461OR Quick Reference Guide.indb 10
Printed in Germany
Part No. 100012970
2/17/12 10:46:17 AM
Download PDF