USER MANUAL - CNET Content Solutions

USER MANUAL
ENGLISH
Thank you very much for choosing the iiyama
LCD monitor.
We recommend that you take a few minutes
to read this comprehensive manual carefully
before installing and switching on the monitor.
Please keep this manual in a safe place for
your future reference.
AB52
ENGLISH
ENGLISH
CE MARKING DECLARATION OF CONFORMITY
This LCD monitor complies with the requirements of the EC Directive 2004/108/EC “EMC
Directive” , 2006/95/EC “Low Voltage Directive” and 2009/125/EC “ErP Directive”.
The electro-magnetic susceptibility has been chosen at a level that gives correct operation in
residential areas, business and light industrial premises and small-scale enterprises, inside as
well as outside of the buildings. All places of operation are characterised by their connection to
the public low voltage power supply system.
IIYAMA CORPORATION: Breguetlaan 8, 1438BC Oude Meer The Netherlands
 We reserve the right to change specifications without notice.
 All trademarks used in this user manual are the property of their respective owners.
®
®
 As an ENERGY STAR Partner, iiyama has determined that this product meets the ENERGY STAR guidelines
for energy efficiency.
ENGLISH
TABLE OF CONTENTS
FOR YOUR SAFETY..........................................................................1
SAFETY PRECAUTIONS..............................................................1
SPECIAL NOTES ON LCD MONITORS .......................................3
CUSTOMER SERVICE .................................................................3
CLEANING ....................................................................................3
BEFORE YOU OPERATE THE MONITOR ........................................4
FEATURES....................................................................................4
CHEKING THE CONTENTS OF THE PACKAGE .........................4
FITTING AND REMOVAL OF BASE :
ProLite E2008HDS / ProLite E2008HDD.......................................5
CONTROLS AND CONNECTORS : ProLite B2008HDS .............6
CONTROLS AND CONNECTORS :
ProLite E2008HDS / ProLite E2008HDD.......................................7
CONNECTING YOUR MONITOR : ProLite B2008HDS ................8
CONNECTING YOUR MONITOR :
ProLite E2008HDS / ProLite E2008HDD.......................................9
COMPUTER SETTING ...............................................................10
ADJUSTING THE HEIGHT AND THE VIEWING ANGLE :
ProLite B2008HDS ...................................................................... 11
ADJUSTING THE VIEWING ANGLE :
ProLite E2008HDS / ProLite E2008HDD..................................... 11
OPERATING THE MONITOR...........................................................12
ADJUSTMENT MENU CONTENTS ............................................13
SCREEN ADJUSTMENTS ..........................................................18
POWER MANAGEMENT FEATURE ...........................................21
TROUBLE SHOOTING ....................................................................22
RECYCLING INFORMATION...........................................................23
APPENDIX ......................................................................................24
SPECIFICATIONS : ProLite B2008HDS ....................................24
SPECIFICATIONS : ProLite E2008HDS ....................................25
SPECIFICATIONS : ProLite E2008HDD ....................................26
DIMENSIONS : ProLite B2008HDS ............................................27
DIMENSIONS : ProLite E2008HDS / ProLite E2008HDD ...........27
COMPLIANT TIMING ..................................................................28
We recommend recycling of used product. Please contact your dealer or iiyama
service center. Recycle information is obtained via the Internet, using the address:
http://www.iiyama.com
You can access the Web page of different countries from there.
FOR YOUR SAFETY
SAFETY PRECAUTIONS
WARNING
If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor
and contact your dealer or iiyama service center immediately. Further use may be dangerous and can
cause fire or electric shock.
NEVER REMOVE THE CABINET
High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of fire
or electric shock.
DO NOT PUT ANY OBJECT INTO THE MONITOR
Do not put any solid objects or liquids such as water into the monitor. In case of an accident, unplug
your monitor immediately and contact your dealer or iiyama service center. Using the monitor with any
object inside may cause fire, electric shock or damage.
INSTALL THE MONITOR ON A FLAT, STABLE SURFACE
The monitor may cause an injury if it falls or is dropped.
DO NOT USE THE MONITOR NEAR WATER
Do not use where water may be splashed or spilt onto the monitor as it may cause fire or electric
shock.
OPERATE UNDER THE SPECIFIED POWER SUPPLY
Be sure to operate the monitor only with the specified power supply. Use of an incorrect voltage will
cause malfunction and may cause fire or electric shock.
PROTECT THE CABLES
Do not pull or bend the power cable and signal cable. Do not place the monitor or any other heavy
objects on the cables. If damaged, the cables may cause fire or electric shock.
ADVERSE WEATHER CONDITIONS
It is advisable not to operate the monitor during a heavy thunder storm as the continual breaks in
power may cause malfunction. It is also advised not to touch the plug in these circumstances as it may
cause electric shock.
FOR YOUR SAFETY 1
ENGLISH
STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE
CAUTION
INSTALLATION LOCATION
Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky
areas as it may cause fire, electric shock or damage. You should also avoid areas where the sun
shines directly on the monitor.
ENGLISH
DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION
The monitor may topple and cause injury if not suitably located. Please also ensure that you do not
place any heavy objects on the monitor, and that all cables are routed such that children may not pull
the cables and possibly cause injury.
MAINTAIN GOOD VENTILATION
Ventilation slots are provided to keep the monitor from overheating. Covering the slots may cause fire.
To allow adequate air circulation, place the monitor at least 10 cm (or 4 inches) from any walls.
Do not remove the tilt stand when operating the monitor. Ventilation slots on the back of the cabinet
will be blocked and the monitor may overheat if the stand is removed. This may cause fire or damage.
Operating the monitor on its back, side, upside down or on a carpet or any other soft material may also
cause damage.
DISCONNECT THE CABLES WHEN YOU MOVE THE MONITOR
When you move the monitor, turn off the power switch, unplug the monitor and be sure the signal cable
is disconnected. If you do not disconnect them, it may cause fire or electric shock.
UNPLUG THE MONITOR
If the monitor is not in use for a long period of time it is recommended that it is left unplugged to avoid
accidents.
HOLD THE PLUG WHEN DISCONNECTING
To disconnect the power cable or signal cable, always pull it by the plug. Never pull on the cable itself
as this may cause fire or electric shock.
DO NOT TOUCH THE PLUG WITH WET HANDS
Pulling or inserting the plug with wet hands may cause electric shock.
WHEN YOU INSTALL THE MONITOR ON YOUR COMPUTER
Be sure the computer is strong enough to hold the weight of the monitor, otherwise, you may damage
your computer.
OTHERS
ERGONOMIC RECOMMENDATIONS
To eliminate eye fatigue, do not operate the monitor against a bright background or in a dark room.
For optimal viewing comfort, the monitor should be just below eye level and 40-60 cm (16-24 inches)
away from your eyes. When using the monitor over a prolonged time, a ten minute break every hour is
recommended as looking at the screen continuously can cause eye strain.
2 FOR YOUR SAFETY
SPECIAL NOTES ON LCD MONITORS
NOTE
When you first turn on the LCD monitor, the picture may not fit in the display area

because of the type of computer that is used. In this case, adjust the picture position
to the correct position.
Due to the nature of the backlight, the screen may flicker during initial use. Turn off the

Power Switch and then turn it on again to make sure the flicker disappears.
You may find slightly uneven brightness on the screen depending on the desktop

pattern you use.
Due to the nature of the LCD screen, an afterimage of the previous screen may

remain after switching the image, when the same image is displayed for hours. In this
case, the screen is recovered slowly by changing the image or turning off the Power
Switch for hours.
Contact your dealer or iiyama service center for the backlight replacement when the

screen is dark, flickering or not lighting up. Never attempt to replace it by yourself.
CUSTOMER SERVICE
NOTE
The fluorescent light used in the LCD monitor may have to be periodically replaced.

For the warranty coverage on this component, please check with local iiyama service
center.
If you have to return your unit for service and the original packaging has been

discarded, please contact your dealer or iiyama service center for advice or
replacement packaging.
CLEANING
If you drop any materials or liquids such as water into the monitor when cleaning,
WARNING 
unplug the power cable immediately and contact your dealer or iiyama service center.
CAUTION
For safety reasons, turn off the power switch and unplug the monitor before you clean

it.
NOTE
To protect the LCD panel, do not scratch or rub the screen with a hard object.

Never use any of the following strong solvents. These will damage the cabinet and the

LCD screen.
Thinner
Benzine
Abrasive cleaner
Spray-type cleaner
Wax
Acid or Alkaline solvent
Touching the cabinet with any product made from rubber or plastic for a long time may

cause degeneration or loss of paint on the cabinet.
CABINET
Stains can be removed with a cloth lightly moistened with a mild detergent solvent. Then
wipe the cabinet with a soft dry cloth.
LCD
Periodic cleaning with a soft dry cloth is recommended.
Don't use tissue paper etc. because these will damage the LCD screen.
SCREEN
FOR YOUR SAFETY 3
ENGLISH
The following symptoms are normal with LCD monitors and do not indicate a problem.
BEFORE YOU OPERATE THE MONITOR
FEATURES
 Supports Resolutions up to 1600 × 900
2
 High Contrast 1000:1 (Typical), ACR Function Available / Brightness 250cd/m
(Typical), Quick Response Time 2ms (Gray to Gray)
ENGLISH
 Digital Character Smoothing
 Automatic Set-up
 Stereo Speakers : ProLite B2008HDS / ProLite E2008HDS
2 × 1W Stereo Speakers
Plug & Play VESA DDC2B Compliant
Windows® 95/98/2000/Me/XP/Vista/7 Compliant
®
 Power Management (ENERGY STAR VESA DPMS Compliant)
 VESA Mounting Standard (100mm×100mm) Compliant
 Keyhole for Security Lock
CHEKING THE CONTENTS OF THE PACKAGE
The following accessories are included in your package. Check to see if they are enclosed with the
monitor. If anything is missing or damaged, please contact your local iiyama dealer or regional iiyama
office.
1
 Power Cable* 
Audio Cable*2

 Quick Start Guide
CAUTION
 D-Sub Signal Cable
3
 Stand-Base*
2
 DVI-D Cable*
 Safety Guide
*1 The rating of the Power Cable enclosed in 120V area is 10A/125V. If you are using
a power supply higher than this rating, then a power cable with a rating of 10A/250V
must be used.However, all guarantees and warranties are void for any
problems or damage caused by a power cable not supplied by iiyama.
*2 Accessory for ProLite B2008HDS / ProLite E2008HDS.
*3 Accessory for ProLite E2008HDS / ProLite E2008HDD.
4 BEFORE YOU OPERATE THE MONITOR
FITTING AND REMOVAL OF BASE : ProLite E2008HDS / ProLite E2008HDD
Put the monitor on a stable surface. The monitor may cause injury or damage if it

falls or is dropped.
Do not give a strong impact to the monitor. It may cause damage.

Unplug the monitor before removal or installation to avoid electric shock or damage.

<Installation>
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay
the monitor flat on a table with front face down.
The Stand-Bottom is pulled up as shown in the figure.
Install the Stand-Base to the Stand-Bottom.
<Remove>
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay
the monitor flat on a table with front face down.
Hold down the hooks inside and pull the Stand-Base away from the Stand-Bottom.
BEFORE YOU OPERATE THE MONITOR 5
ENGLISH
CAUTION
ENGLISH
CONTROLS AND CONNECTORS : ProLite B2008HDS
<Front>
<Back>
Power Indicator
NOTE Blue:
Normal operation
Orange: Power Management
The monitor enters into power management mode which reduces the power
consumption to less than 1W when receiving no horizontal and/or vertical
sync signal.
Power Switch (
)
Menu / Select Button (ENTER)
Scroll Up / Brightness Button (
)
Scroll Down / ECO Mode Button*1 (
/
)
Exit Button (EXIT)
Auto Button (AUTO)
Speakers
D-SUB mini 15pin Connector (D-SUB)
DVI-D 24pin Connector (DVI-D)
AC Connector (POWER IN)
Audio Connector*2 (LINE IN)
Keyhole for Security Lock
NOTE You can fasten a security lock and cable to prevent the monitor from being removed
without your permission.
Cable Holder
*1 See page 17 for Direct.
6 BEFORE YOU OPERATE THE MONITOR
ENGLISH
CONTROLS AND CONNECTORS : ProLite E2008HDS / ProLite E2008HDD
<Front>
<Back>
Power Indicator
NOTE Blue:
Normal operation
Orange: Power Management
The monitor enters into power management mode which reduces the power
consumption to less than 1W when receiving no horizontal and/or vertical
sync signal.
Power Switch (
)
Menu / Select Button (ENTER)
Scroll Up / Brightness Button (
)
Scroll Down / ECO Mode Button*1 (
/
)
Exit Button (EXIT)
Auto Button (AUTO)
Speakers*2
D-SUB mini 15pin Connector (D-SUB)
DVI-D 24pin Connector (DVI-D)
AC Connector (POWER IN)
Audio Connector*2 (LINE IN)
Keyhole for Security Lock
NOTE You can fasten a security lock and cable to prevent the monitor from being removed
without your permission.
Cable Holder
*1 See page 17 for Direct.
*2 Available for ProLite E2008HDS only.
BEFORE YOU OPERATE THE MONITOR 7
CONNECTING YOUR MONITOR : ProLite B2008HDS
Ensure that both the computer and the monitor are switched off.
Connect the computer to the monitor with the signal cable.
Connect the monitor to the audio equipment with the Audio Cable for computer when using the
audio features.
Connect the Power Cable to the monitor first and then to the power supply.
Power of the monitor and the computer is turned on.
ENGLISH
NOTE
 The signal cables used for connecting the computer and monitor may vary with the type of
computer used. An incorrect connection may cause serious damage to both the monitor and
the computer. The cable supplied with the monitor is for a standard 15 pin D-Sub connector.
If a special cable is required please contact your local iiyama dealer or regional iiyama
office.
 For connection to Macintosh computers, contact your local iiyama dealer or regional
iiyama office for a suitable adaptor.
 Make sure you tighten the finger screws at each end of the signal cable.
[Example of Connection]
<Back>
Power Cable
(Accessory)
D-Sub Signal Cable
(Accessory)
DVI-D Cable (Accessory)
Audio Cable (Accessory)
Computer
[ Collect Cables ]
A Put the cables through the cable holder.
B Collect cables at the back of the stand.
8 BEFORE YOU OPERATE THE MONITOR
CONNECTING YOUR MONITOR : ProLite E2008HDS / ProLite E2008HDD
Ensure that both the computer and the monitor are switched off.
Connect the computer to the monitor with the signal cable.
Connect the monitor to the audio equipment with the Audio Cable for computer when using the
audio features.
Connect the Power Cable to the monitor first and then to the power supply.
NOTE
 The signal cables used for connecting the computer and monitor may vary with the type of
computer used. An incorrect connection may cause serious damage to both the monitor and
the computer. The cable supplied with the monitor is for a standard 15 pin D-Sub connector.
If a special cable is required please contact your local iiyama dealer or regional iiyama
office.
 For connection to Macintosh computers, contact your local iiyama dealer or regional
iiyama office for a suitable adaptor.
 Make sure you tighten the finger screws at each end of the signal cable.
[Example of Connection]
<Back>
Power Cable
(Accessory)
D-Sub Signal Cable
(Accessory)
DVI-D Cable (Accessory)*1
Audio Cable (Accessory)*2
Computer
1
* Not included in the ProLite E2008HDD.
*2 Available for ProLite E2008HDS only.
[ Fitting and Removal of Cable Holder ]
Removal
Pull out the hook.
Hold the both sides of the hook, and remove one
tab at a time.
Fitting
Collect cables at the back of the stand.
Hold the both sides of the hook, and insert one tab
at a time into the holes.
BEFORE YOU OPERATE THE MONITOR 9
ENGLISH
Power of the monitor and the computer is turned on.
COMPUTER SETTING
ENGLISH
 Signal Timing
Change to the desired signal timing listed on page 28: COMPLIANT TIMING.
 Windows 95/98/2000/Me/XP/Vista/7 Plug & Play
The iiyama LCD monitor complies with DDC2B of VESA standard. The Plug & Play function runs on
Windows 95/98/2000/Me/XP/Vista/7 by connecting the monitor to DDC2B compliant computer with
the Signal Cable supplied.
For installation on Windows 95/98/2000/Me/XP: The monitor Information File for iiyama monitors
may be necessary for your computer and obtained via the Internet, using the address:
http://www.iiyama.com
NOTE
For additional information on how to download the driver for your touch screen monitor,

please access the internet site noted above.
Monitor Drivers are not required in most cases for Macintosh or Unix operating systems.

For further information, please contact your computer dealer first for advice.
10 BEFORE YOU OPERATE THE MONITOR
ADJUSTING THE HEIGHT AND THE VIEWING ANGLE : ProLite B2008HDS
NOTE
 Do not touch the LCD screen when you
change the height or the angle. It
may cause damage or break the LCD
screen.
 Careful attention is required not to
catch your fingers or hands when you
change the height or the angle.
5°
20°
100mm
ENGLISH
 For optimal viewing it is recommended to position
yourself directly opposite to the full face of the
monitor, then adjust the monitor’s height and
angle to your own preference.
 Hold the panel so that the monitor does not topple
when you change the monitor’s height or angle.
 You are able to adjust the monitor's height up to
100mm, angle up to 45 degrees right and left, 20
degrees upward, 5° downward.
45°
45°
ADJUSTING THE VIEWING ANGLE : ProLite E2008HDS / ProLite E2008HDD
 For optimal viewing it is recommended to look at the full face of
the monitor.
 Hold the stand so that the monitor does not topple when you
change the monitor’s angle.
 You are able to adjust the monitor’s angle up to 20° upward, 5°
downward.
 In order to ensure a healthy and relaxed body position
when using the monitor at visual display workstations, it is
recommended that the adjusted tilt angle should not exceed 10
degrees. Adjust the monitor’s angle to your own preference.
NOTE
 Do not touch the LCD screen when you change
the angle. It may cause damage or break the LCD
screen.
 Careful attention is required not to catch your fingers
or hands when you change the angle.
 Do not tilt the post beyond 20 degrees except when
repacking the monitor in its box.
To do so may cause the monitor to fall over and
break.
BEFORE YOU OPERATE THE MONITOR 11
OPERATING THE MONITOR
To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT
TIMING shown on page 28. You are also able to adjust the picture by following the button operation
shown below. For more detailed adjustments, see page 18 for SCREEN ADJUSTMENTS.
Press the ENTER Button to start the On Screen Display feature. There are additional
Menu items which can be switched by using the / Buttons.
Main Menu
ENGLISH
Auto Adjust
Language
Luminance
Recall
Geometry
Miscellaneous
Color
Input Select
OSD
Audio
Select the Menu item which contains the adjustment icon relating to the adjustment
you want to make. Press the ENTER Button. Then, use the
/
Buttons to
highlight the desired adjustment icon.
Press the ENTER Button again. Use the
adjustment or setting.
/
Buttons to make the appropriate
Press the EXIT Button to leave the menu, and the settings you just made would be
automatically saved.
For example, to correct for vertical position, select Menu item of Geometry and then press the
ENTER Button. Then, select
(V.Position) by using the / Buttons.
Main Menu
Geometry
Auto Adjust
Language
Luminance
Recall
Geometry
H. Position
50
V. Position
50
Pixel Clock
50
Phase
50
Miscellaneous
Color
Input Select
OSD
Audio
An adjustment page appears after you press the ENTER Button. Then, use the
/
Buttons to
change the vertical position settings. The vertical position of the overall display should be changing
accordingly while you are doing this.
Press the EXIT Button lastly, it ends, any changes are saved in the memory.
Geometry
V. Position
50
NOTE
When button operations are aborted during adjustment, On-Screen Display disappears when the

time set for the OSD Time has passed. Also, press the EXIT button to quickly turn off the On-Screen
Display.
Any changes are automatically saved in the memory when the On Screen Display disappears.

Turning off the power should be avoided while using the Menu.
Adjustments for H. / V. Position, Pixel Clock and Phase are saved for each signal timing. Except for

these adjustments, all other adjustments have only one setting which applies to all signal timings.
12 OPERATING THE MONITOR
ADJUSTMENT MENU CONTENTS
Only Analog Input
Adjustment Item
Auto Adjust *
Problem / Option
Direct
Button to Press
Adjust H. / V. Position, Pixel Clock and Phase
automatically.
* For best results, use the Auto Adjust in conjunction with the adjustment pattern. See page 18 for
SCREEN ADJUSTMENTS.
Direct
You can skip the Menu items and display an adjustment scale directly by using the following button
operations.
Auto Adjust: Press the Auto Button when the Menu is not displayed.

Luminance *1
Adjustment Item
Brightness *2
Contrast
Problem / Option
Direct
Button to Press
Too dark
Too bright
Too dull
Too intense
*1 Luminance adjustment disabled when ACR mode is active.
*2 Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too
bright.
Direct
You can skip the Menu items and display an adjustment scale directly by using the following button
operations.
Brightness: Press the Button when the Menu is not displayed.

OPERATING THE MONITOR 13
ENGLISH
Auto Adjust
Geometry
Only Analog Input
ENGLISH
Adjustment Item
Problem / Option
H. Position
Too left
Too right
V. Position
Too low
Too high
Pixel Clock
Too narrow
Too wide
Phase
Button to Press
To correct flickering text or lines
Color
Adjustment Item
Problem / Option
9300K
Bluish white
7500K
Yellowish white
6500K
Reddish white
User Preset
Red
Green
Blue
Button to Press
Too weak
Too strong
OSD
Adjustment Item
Problem / Option
Button to Press
H.Position
OSD is too left
OSD is too right
V.Position
OSD is too low
OSD is too high
OSD Time
You can set the OSD display duration time
between 5 and 30 seconds.
14 OPERATING THE MONITOR
Language
Adjustment Item
English
Français
Deutsch
Italiano
Polski
English
French
German
Italian
Polish
Button to Press
Español
Nederlands
Spanish
Dutch
Japanese
Simplified Chinese
Russian
ENGLISH
Language
Problem / Option
Recall
Adjustment Item
Recall All
Problem / Option
Button to Press
Yes
Factory-preset data is restored.
No
Return to Menu.
OPERATING THE MONITOR 15
Miscellaneous
Adjustment Item
Problem / Option
Button to Press
12345
ENGLISH
Sharpness
DDC/CI
NOTE
You can change the picture quality from 1 to 5 (sharp to soft).
Press the Button to change the picture quality in numerical
order. Press the Button to change the picture quality in reverse
numerical order.
On
DDC/CI is turned ON.
Off
DDC/CI is turned OFF.
DDC/CI On and Off are switched as follows by pressing the
On
Off
Button successively.
Displays information regarding the current input signal coming
from the graphic card in your computer.
Miscellaneous
Display Information
Display Information
1600x900
NOTE
ACR
@ 60 Hz
See your graphic card user guide for more information
about changing the resolution and refresh.
On
Increased Contrast Ratio
Off
Typical Contrast Ratio
Full
Expansion display
Aspect
Expansion display of Aspect
On
Increased Response time
Off
Typical Response time
Display Mode
OD
16 OPERATING THE MONITOR
Input Select
Adjustment Item
Problem / Option
D-sub
DVI
Input Select
Select the Analog input.
Select the Digital input.
When only one of the two signal inputs is connected to the signal source, the one connected
is automatically selected. Input Select function is not available if there is no signal input from
the selected connector or during the power management mode.
ENGLISH
NOTE
Button to Press
Audio*
Adjustment Item
Volume
Problem / Option
Button to Press
Too soft
Too loud
On
Turn off the sound temporarily.
Off
Return the sound volume to the previous level.
Mute
NOTE
Mute On and Off are switched as follows by pressing the
On
Off
Button successively.
* Available for ProLite B2008HDS / ProLite E2008HDS only.
Direct
You can skip the Menu items and display an adjustment scale directly by using the following button
operations.
ECO Mode : Press the Button when the Menu is not displayed.

On : Brightness of back light is reduced.
Off : Normal
<ProLite B2008HDS / ProLite E2008HDS>
OptiColor : Press the EXIT Button when the Menu is not displayed.

Standard : For general windows environment and monitor default setting.
Office : For text editing and viewing in a word processing environment.
Movie : For movie and video environment.
Game : For PC game environment.
Scenery : For displaying outdoor scenery images.
<ProLite E2008HDD>
i-Style Color : Press the EXIT Button when the Menu is not displayed.

Standard : For general windows environment and monitor default setting.
Game : For PC game environment.
Cinema : For movie and video environment.
Scenery : For displaying outdoor scenery images.
Text : For text editing and viewing in a word processing environment.
OPERATING THE MONITOR 17
SCREEN ADJUSTMENTS
Adjust the image by following the procedure below to get the desired picture when selecting Analog input.
 The screen adjustments described in this manual are designed to set image position and minimize
flicker or blur for the particular computer in use.
 The monitor is designed to provide the best performance at resolution of 1600 × 900, but can not
provide the best at resolutions of less than 1600 × 900 because the picture is automatically stretched
to fit the full screen. It is recommended to operate at resolution of 1600 × 900 in normal use.
ENGLISH
 Displayed text or lines will be blurred or irregular in thickness when the picture is stretched due to
the screen enlargement process.
 It is preferable to adjust the image position and frequency with the monitor controls, rather than the
computer software or utilities.
 Perform adjustments after a warm-up period of at least thirty minutes.
 Additional adjustments may be required after the Auto Adjust depending on the resolution or signal
timing.
 The Auto Adjust may not work correctly when displaying the picture other than the screen adjustment
pattern. In this case, manual adjustments are required.
There are two ways to adjust the screen. One way is automatic adjustment for Position, Pixel Clock
and Phase. The other way is performing each adjustment manually.
Perform the Auto Adjust first when the monitor is connected to a new computer, or resolution is
changed. If the screen has a flicker or blur, or the picture does not fit in the display area after
performing the Auto Adjust, manual adjustments are required. Both adjustments should be made by
using the screen adjustment pattern (Test.bmp) obtained via the IIYAMA web site (http://www.iiyama.
com).
Adjust the image by following the procedure below to get the desired picture.
This manual explains adjustment under Windows 95/98/2000/Me/XP/Vista/7.
Display the picture at the optimum resolution.
Enter the Test.bmp (screen adjustment pattern) to wallpaper.
NOTE
 Consult the appropriate documentation for doing this.
 Test.bmp is made at resolution of 1280 × 1024. Set the display position to center in the
wallpaper setting dialogue box. If you use Microsoft® PLUS! 95/98 cancel the setting of
“Stretch desktop wallpaper to fit the screen”.
[Adjustment pattern]
Color bar
Zebra pattern
Picture frame
18 OPERATING THE MONITOR
Press the Auto Button. (Auto Adjust)
Adjust the image manually by following procedure below when the screen has a flicker or
blur, or the picture does not fit in the display area after performing the Auto Adjust.
Adjust the V.Position so that the top and bottom of the picture frame will fit to the display
ENGLISH
area.
1) Adjust the H.Position so that the left side of the picture frame will move to the left edge of
the display area.
2) Stretch the right side of the picture frame to the right edge of the display area by
adjusting the Pixel Clock.
NOTE  When the left side of the picture frame moves apart from the left edge of the display
area during the Pixel Clock adjustment, adjust steps 1) and 2).
 Another way to make the Pixel Clock adjustment is to correct the vertical wavy lines in
the zebra pattern.
 The picture may flicker during the Pixel Clock, H.Position and V.Position adjustment.
 In case the picture frame is bigger or smaller than the data display area after the Pixel
Clock adjustment, repeat steps from .
OPERATING THE MONITOR 19
ENGLISH
Adjust the Phase to correct horizontal wavy noise, flicker or blur in the zebra pattern.
NOTE
 In case the strong flicker or blurs remain on a part of the screen, repeat steps F and
G because the Clock may not be adjusted correctly. If the flicker or blurs still remain,
set the refresh rate of computer to low (60Hz) and repeat steps from C again.
 Adjust the H.Position after the Phase adjustment if the horizontal position moves
during the adjustment.
Adjust the Brightness and Color to get the desired picture after you complete the Pixel Clock
and Phase adjustments.
Put back your favorite wallpaper.
20 OPERATING THE MONITOR
POWER MANAGEMENT FEATURE
Power Management Mode

When the H-sync signal / V-sync signal / H and V sync signals from the computer are off, the monitor
enters into Power Management Mode which reduces the power consumption to less than 1W. The
screen becomes dark, and the power indicator turns to orange. From Power Management Mode,
the image reappears in several seconds when either the keyboard or the mouse are touched again.
Power Indicator
NORMAL MODE
POWER MANAGEMENT MODE
Blue
Orange
POWER 0
1W
CONSUMPTION
NOTE
100%
Even when using the power management mode, the monitor consumes electricity. Turn off

the Power Switch whenever the monitor is not in use, during the night and weekends, to
avoid unnecessary power consumption.
It is possible that the video signal from the computer may be on while the H or V sync

signal is missing. In this instance, the POWER MANAGEMENT feature may not work
properly.
OPERATING THE MONITOR 21
ENGLISH
The power management feature of this product complies with power saving requirement of ENERGY
STAR® and VESA DPMS. When activated, it automatically reduces unnecessary power consumption of
the monitor when your computer is not in use.
To use the feature, the monitor needs to be connected to a VESA DPMS compliant computer. There
is a power management step the monitor takes as described below. The power management function,
including any timer settings is configured by the operating system. Check your operating system
manual for information on how this can be configured.
TROUBLE SHOOTING
If the monitor fails to operate correctly, please follow the steps below for a possible solution.
1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem you
have. If the monitor does not get a picture, skip to 2.
2. Consult the following items if you cannot find an appropriate adjustment item in OPERATING THE
MONITOR or if the problem persists.
ENGLISH
3. If you are experiencing a problem which is not described below or you cannot correct the problem,
discontinue using the monitor and contact your dealer or iiyama service center for further assistance.
Problem
Check
The picture does
not appear.
(Power indicator 
The Power Cable is firmly seated in the socket.
does not light up.) 
The Power Switch is turned ON.
The AC socket is live. Please check with another piece of equipment.

(Power indicator
is blue.)
If the blank screen saver is in active mode, touch the keyboard or the mouse.

Increase the Contrast and/or Brightness.

The computer is ON.

The Signal Cable is properly connected.

The signal timing of the computer is within the specification of the monitor.

(Power indicator
is orange.)
If the monitor is in power management mode, touch the keyboard or the mouse.

The computer is ON.

The Signal Cable is properly connected.

The signal timing of the computer is within the specification of the monitor.

The screen is not
synchronized.
The Signal Cable is properly connected.

The signal timing of the computer is within the specification of the monitor.

The video output level of the computer is within the specification of the monitor.

The screen
position is not in
the center.
The signal timing of the computer is within the specification of the monitor.

The screen is too
bright or too dark.
The video output level of the computer is within the specification of the

monitor.
The screen is
shaking.
The power voltage is within the specification of the monitor.

The signal timing of the computer is within the specification of the monitor.

22 TROUBLE SHOOTING
Check
No sound.
The audio equipment (computer etc.) is ON.

The Audio Cable is properly connected.

The Volume is turned up.

The Mute is OFF.

The audio output level of the audio equipment is within the specification

of the monitor.
The sound is too
loud or too quiet.
The audio output level of the audio equipment is within the specification

of the monitor.
A strange noise is
heard.
The Audio Cable is properly connected.

RECYCLING INFORMATION
For better environment protection please don't dispose your monitor.
Please visit our web site: www.iiyama.com/recycle for monitor recycling.
TROUBLESHOOTING / RECYCLING INFORMATION 23
ENGLISH
Problem
APPENDIX
SPECIFICATIONS : ProLite B2008HDS
20"
LCD Panel
Driving system
a-Si TFT Active Matrix
Size
Diagonal: 20" (50.8cm)
ENGLISH
Size Category
Pixel pitch
0.2768mm H × 0.2768mm V
Brightness
250cd/m2 (Typical)
Contrast ratio
1000 : 1 (Typical), ACR Function Available
Viewable angle
Right / Left : 80 degrees each, Up / Down : 80 degrees each (Typical)
Response time
2ms (Gray to Gray)
Display Colors
Approx.16.7M
Sync Frequency
Horizontal: 31.0-83.0kHz, Vertical: 56-75Hz
Maximum Resolution
1600 × 900, 1.44 MegaPixels
Input Connector
D-Sub mini 15 pin, DVI-D 24 pin
Plug & Play
VESA DDC2BTM
Input Sync Signal
Separate sync: TTL, Positive or Negative
Input Video Signal
Analog: 0.7Vp-p (Standard), 75Positive
Digital: DVI (Digital Visual Interface Standard Rev.1.0) compliance
Input Audio Connector
ø 3.5mm mini jack (Stereo)
Input Audio Signal
1.0Vrms maximum
Speakers
1W × 2 (Stereo speakers)
Maximum Screen Size
442.8mm W × 249.1mm H / 17.4" W × 9.8" H
Power Source
100-240VAC, 50/60Hz, 0.7A
Power Consumption*
25W typical, Power management mode: 1W maximum
Dimensions / Net Weight
485.0× 389.5 - 489.5 × 214.5mm / 19.1 × 15.3 - 19.3 × 8.4" (W×H×D)
6.6kg / 14.55lbs
Tilt Angle
Upward: 20 degrees Downward: 5 degrees Right / Left: 45 degrees each
Environmental
Considerations
Operating: Temperature
Humidity
Storage: Temperature
Humidity
Approvals
CE, TÜV-Bauart, VCCI-B
NOTE
* Audio equipment is not connected.
24 APPENDIX
5 to 35°C / 41 to 95°F
10 to 80% (No condensation)
-20 to 60°C / -4 to 140°F
5 to 85% (No condensation)
Size Category
20"
LCD Panel
Driving system
a-Si TFT Active Matrix
Size
Diagonal: 20" (50.8cm)
Pixel pitch
0.2768mm H × 0.2768mm V
Brightness
250cd/m2 (Typical)
Contrast ratio
1000 : 1 (Typical), ACR Function Available
Viewable angle
Right / Left : 80 degrees each, Up / Down : 80 degrees each (Typical)
Response time
2ms (Gray to Gray)
Display Colors
Approx.16.7M
Sync Frequency
Horizontal: 31.0-83.0kHz, Vertical: 56-75Hz
Maximum Resolution
1600 × 900, 1.44 MegaPixels
Input Connector
D-Sub mini 15 pin, DVI-D 24 pin
Plug & Play
VESA DDC2BTM
Input Sync Signal
Separate sync: TTL, Positive or Negative
Input Video Signal
Analog: 0.7Vp-p (Standard), 75Positive
Digital: DVI (Digital Visual Interface Standard Rev.1.0) compliance
Input Audio Connector
ø 3.5mm mini jack (Stereo)
Input Audio Signal
1.0Vrms maximum
Speakers
1W × 2 (Stereo speakers)
Maximum Screen Size
442.8mm W × 249.1mm H / 17.4" W × 9.8" H
Power Source
100-240VAC, 50/60Hz, 0.7A
Power Consumption*
25W typical, Power management mode: 1W maximum
Dimensions / Net Weight
485.0× 367.0 × 193.0mm / 19.1 × 14.4 × 7.6" (W×H×D)
4.0kg / 8.8lbs
Upward: 20 degrees Downward: 5 degrees
Tilt Angle
Environmental
Considerations
Operating: Temperature
Humidity
Storage: Temperature
Humidity
Approvals
CE, TÜV-Bauart, VCCI-B
NOTE
5 to 35°C / 41 to 95°F
10 to 80% (No condensation)
-20 to 60°C / -4 to 140°F
5 to 85% (No condensation)
* Audio equipment is not connected.
APPENDIX 25
ENGLISH
SPECIFICATIONS : ProLite E2008HDS
ENGLISH
SPECIFICATIONS : ProLite E2008HDD
Size Category
20"
LCD Panel
Driving system
a-Si TFT Active Matrix
Size
Diagonal: 20" (50.8cm)
Pixel pitch
0.2768mm H × 0.2768mm V
Brightness
250cd/m2 (Typical)
Contrast ratio
1000 : 1 (Typical), ACR Function Available
Viewable angle
Right / Left : 80 degrees each, Up / Down : 80 degrees each (Typical)
Response time
2ms (Gray to Gray)
Display Colors
Approx.16.7M
Sync Frequency
Horizontal: 31.0-83.0kHz, Vertical: 56-75Hz
Maximum Resolution
1600 × 900, 1.44 MegaPixels
Input Connector
D-Sub mini 15 pin, DVI-D 24 pin
Plug & Play
VESA DDC2BTM
Input Sync Signal
Separate sync: TTL, Positive or Negative
Input Video Signal
Analog: 0.7Vp-p (Standard), 75Positive
Digital: DVI (Digital Visual Interface Standard Rev.1.0) compliance
Maximum Screen Size
442.8mm W × 249.1mm H / 17.4" W × 9.8" H
Power Source
100-240VAC, 50/60Hz, 0.7A
Power Consumption
25W typical, Power management mode: 1W maximum
Dimensions / Net Weight
485.0× 367.0 × 193.0mm / 19.1 × 14.4 × 7.6" (W×H×D)
4.0kg / 8.8lbs
Upward: 20 degrees Downward: 5 degrees
Tilt Angle
Environmental
Considerations
Operating: Temperature
Humidity
Storage: Temperature
Humidity
Approvals
CE, TÜV-Bauart, VCCI-B
26 APPENDIX
5 to 35°C / 41 to 95°F
10 to 80% (No condensation)
-20 to 60°C / -4 to 140°F
5 to 85% (No condensation)
DIMENSIONS : ProLite B2008HDS
485.0mm/19.1”
445.0mm/17.5”
(
ENGLISH
309.0mm/12.2”
214.5mm/8.4”
251.5mm/9.9”
292.0mm/11.5”
389.5mm/15.3” (489.5mm/ 19.3”)
62.5mm/2.5”
) : Maximum adjustment range
DIMENSIONS : ProLite E2008HDS / ProLite E2008HDD
485.0mm / 19.1"
445.0mm / 17.5"
193.0mm / 7.6"
367.0mm / 14.4"
251.0mm / 9.9"
291.5mm / 11.5"
62.5mm / 2.5"
242.5mm / 9.6"
APPENDIX 27
COMPLIANT TIMING
Video Mode
VGA
SVGA
ENGLISH
VESA
VGA TEXT
XGA
640 × 480
800 × 600
1024 × 768
PC Input
Horizontal
Frequency
Vertical
Frequency
Dot Clock
31.469kHz
59.940Hz
25.175MHz
37.500kHz
75.000Hz
31.500MHz
37.879kHz
60.317Hz
40.000MHz
46.875kHz
75.000Hz
49.500MHz
48.363kHz
60.004Hz
65.000MHz
60.023kHz
75.029Hz
78.750MHz
63.981kHz
60.020Hz
108.000MHz
SXGA
1280 × 1024
79.976kHz
75.025Hz
135.000MHz
HD+
1600 × 900
55.540kHz
60.000Hz
97.750MHz
640 × 350
31.469kHz
70.087Hz
25.175MHz
720 × 400
31.469kHz
70.087Hz
28.322MHz
*
*
NOTE * DVI input is not compliant.
28 APPENDIX
M049A21
Download PDF