Fanvil Product User Manual Android IP Video Phone Model: D800

Android IP Video Phone D800 User Manual
Fanvil Product User Manual
Android IP Video Phone
Model: D800
Android IP Video Phone D800 User Manual
Contents
INTRODUCTION ............................................................................. 6
ANDROID IP VIDEO PHONE D800 OVERVIEW .............................................................. 6
WITH ATTACHMENT ..................................................................................................... 6
PHONE COMPONENT DESCRIPTIONS ............................................................................. 7
THE INSTALLATION OF BACKPLANE ............................................................................. 9
INTERFACE INTRODUCTION .......................................................................................... 9
TOUCH SCREEN DESCRIPTION ................................................................................... 12
UPDATE OF THE PHONE .............................................................................................. 13
BASIC FUNCTION ......................................................................... 14
SCREEN KEYBOARD .................................................................................................. 14
STATUS BAR .............................................................................................................. 15
MAIN SCREEN ........................................................................................................... 16
THE APPLICATION OF ANDROID IP VIDEO PHONE D800’S FUNCTION: .................. 18
DESKTOP WIDGETS.................................................................................................... 21
SETTINGS ..................................................................................... 24
STATUS ...................................................................................................................... 24
NETWORK.................................................................................................................. 25
Network................................................................................................................................. 25
PPPoE .................................................................................................................................... 26
QoS ........................................................................................................................................ 27
Port ........................................................................................................................................ 30
Stun ....................................................................................................................................... 31
ACCOUNTS ................................................................................................................ 32
CALL ......................................................................................................................... 35
General .................................................................................................................................. 35
Dial plan ................................................................................................................................ 37
Account ................................................................................................................................. 39
DISPLAY .................................................................................................................... 40
Screen.................................................................................................................................... 40
Hibernate .............................................................................................................................. 41
Display ................................................................................................................................... 42
SOUND....................................................................................................................... 43
Tone ....................................................................................................................................... 44
Volume .................................................................................................................................. 44
LANGUAGE ................................................................................................................ 45
DATE & TIME ............................................................................................................. 46
MAINTAIN.................................................................................................................. 47
1
Android IP Video Phone D800 User Manual
Update ................................................................................................................................... 47
Service port ........................................................................................................................... 50
Password ............................................................................................................................... 51
Reset phone .......................................................................................................................... 52
CWMP set.............................................................................................................................. 53
AUDIO ....................................................................................................................... 54
Audio ..................................................................................................................................... 54
Audio param .......................................................................................................................... 55
VIDEO........................................................................................................................ 55
Video param.......................................................................................................................... 56
Bandwidth ............................................................................................................................. 56
SETTINGS................................................................................................................... 57
ACTION URL .............................................................................................................. 59
PHONE APPLICATION ................................................................... 59
PHONE ....................................................................................................................... 59
CONTACTS ................................................................................................................. 65
CALL LOGS ................................................................................................................ 69
MEMORY KEY ........................................................................................................... 71
NETWORK PHONEBOOK ............................................................................................. 74
MWI ......................................................................................................................... 75
OTHER APPLICATION ................................................................... 77
EMAIL ....................................................................................................................... 77
CALCULATOR............................................................................................................. 79
BROWSER .................................................................................................................. 82
RECORDER................................................................................................................. 82
DIGITAL CLOCK ......................................................................................................... 84
ALARM CLOCK .......................................................................................................... 84
GALLERY ................................................................................................................... 84
FILE MANAGER ......................................................................................................... 85
CAMERA .................................................................................................................... 87
MESSAGING ............................................................................................................... 88
MUSIC ....................................................................................................................... 89
CALIBRATION ............................................................................................................ 90
CALENDAR ................................................................................................................ 91
PINGBOX ................................................................................................................... 91
THE SHORTCUT TO REBOOT THE PHONE QUICKLY. ...................................................... 93
ANDROID SYSTEM SETTING ......................................................... 94
BASIC SETTINGS ........................................................................................................ 94
WAN ...................................................................................................................................... 94
2
Android IP Video Phone D800 User Manual
Sound & display..................................................................................................................... 95
Configuration management .................................................................................................. 97
Language & keyboard............................................................................................................ 98
Date & time ........................................................................................................................... 98
VOIP ......................................................................................................................... 99
CALL SETTINGS........................................................................................................ 103
ADVANCED SETTINGS .............................................................................................. 105
Location & security.............................................................................................................. 105
Privacy ................................................................................................................................. 106
Applications ......................................................................................................................... 106
Accounts & sync .................................................................................................................. 106
SD card and memory ........................................................................................................... 106
Search.................................................................................................................................. 107
ABOUT PHONE ......................................................................................................... 107
WEB PAGE CONFIGURATION DESCRIPTION ................................ 109
BASIC ...................................................................................................................... 109
NETWORK................................................................................................................ 111
VOIP ....................................................................................................................... 113
PHONE ................................................................................................................... 119
MAINTENANCE ................................................................................................... 122
SECURITY ............................................................................................................ 130
LOGOUT................................................................................................................ 132
3
Android IP Video Phone D800 User Manual
Introduction
Android IP Video Phone D800 Overview
With Attachment
Item
Power Adapter
Network Cable
Handset
Handset Line
Function
Power supply for telephone.
Used to access network for the phone.
Make phone calls with the phone’s basic functions.
Connected with the Handset and the phone.
6
Android IP Video Phone D800 User Manual
Phone component descriptions
Key
Function
Search key. Tap the key and you can enter the search
interface.
Option key. You can browse and accomplish all functions
of the phone through pressing this key.
Return key. Press this button in the detailed interface, it
will return to the previous interface; If it is pressed in the
application program interface, the current program will be
closed.
Home key. Press this key, the phone will return to the idle
screen.
Volume control key. Turn down or turn up all kinds of
volume by pressing these two keys.
Mute key. In the call mode, press this key in calling mode,
you can hear the other side, and the other side cannot hear
you; press this button again to leave this mode.
When the phone call is ringing, press this button to turn
off the ring tips.
7
Android IP Video Phone D800 User Manual
Confirm key.
Delete key.
R/Send key. Use the key to dial the last call number. It
also could be used to make a phone call by sending a
phone number.
Navigation key.
Menu key.
Phone book. Tap to enter the contacts interface.
Call log. Tap to see call logs.
Headset key.
Digital keyboard.
The hands-free key.
8
Android IP Video Phone D800 User Manual
The Installation of backplane
 Set the telephone in horizontal
The back plate is horizontally placed in the telephone at the bottom, and makes
the phone and joint part of the two screws tightened, right now its steady level
placed on the desktop.
Interface introduction
Interface illustration picture 1
9
Android IP Video Phone D800 User Manual
Name
Meaning
SD Card interface
Connect SD Card for saving
data.
DC Power Interface
Input: 220V AC
Output: 12V DC
LAN Network interface
Specification RJ45, connect it
computer.
WAN Internet interface
Specification RJ45, connect it
to network.
PSTN Normal
interface
Specification RJ11, connect the
general
public
telephone
network.(Not available)
（Left first）
（Left second）
（Left third）
（Right third）
(Right second）
Handset interface
（Right first）
phone
Specification RJ9, used to
connect the Handset to the
phone.
10
Android IP Video Phone D800 User Manual
Name
Meaning
USB interface.
Connect it to USB disk.
Headset interface.
Connect the Headset.
HDMI interface.
Interface for high-definition
audio and video. A-A interface,
A to A interface.
(Left first)
(Center)
(Right first)
 Note:
1. Put the handset line into the handset interface according to the interface
illustration picture.
2. Install the backplane to the bottom of the phone with the above methods.
3. Plug the power adapter into the DC port; poke the other side of the power
adapter into an electric socket.
4. Insert one end of RJ45 network cable into the phone’s WAN port (Please
refer to the interface illustration picture 1) and put the other end into the
network equipment. After that, if the network connection status on the status
bar is displayed as
, actions such as making some telephone calls and
surfing the internet could be done. If the network connection status on the
11
Android IP Video Phone D800 User Manual
status bar is displayed as
, please verify whether the network was
configured correctly and the network cable was plugged in correctly.
Touch Screen Description
You can touch the screen manually to complete the corresponding operation.
Here are three ways to use:
Click: Any icon or button can be clicked to realize its function.
Click the icon
Click the "Application" icon, and then it will jump to the following interface.
Long press:
 Long press the idle desktop. After that, an option box could be popped up,
and then you can do more according to the prompt.
 Long press one list such as a list of contact list. After that, another option
box could be popped up, and then you can do more about this list according
to the prompt.
12
Android IP Video Phone D800 User Manual
Picture:
Slide:
Slide your hand on the screen upward or downward slowly to move the
interface on the screen.
On some kinds of screen such as idle desktop, you can switch the desktop just
by moving your fingers on the screen to left or right. Dragging your finger to
slide will not select or activate anything on the screen.
You can just wait or gently press any place of the screen to stop the sliding
after your fingertips rapidly sliding on the screen. Gently pressing or touching
to stop the scrolling will not select or activate anything on the screen.
Update of the phone
Please contact with service provider to get the new version to upgrade.
Auto provision: Keep phone registered successfully and configure parameters
about automatic updates such as server address, upgrade file name, time
interval and so on. And then the phone will check for updates from the server at
a fixed time intervals and upgrade itself. See the specific automatically upgrade
instructions, please switch to Update.
Manual update: USB update
USB update. It has two update methods:
1. Create a directory named "imp install" in the USB disk, and copy the update
file to this directory, and then insert the USB into the phone. The phone will
13
Android IP Video Phone D800 User Manual
automatically compare the update image, if the image name is different from
the phone has, it will automatically update. (Upgrade where needs to be
updated)
2. Create a directory named "imp Linux" in the USB disk, and copy the update
file to this directory, and then insert the USB into the phone. The phone will
automatically compare the update version number in the U disc and telephone
after rebooting. Then it will automatically upgrade just as the version number
and the image in the U disc is different. (Upgrade all system)
Basic Function
Screen Keyboard
If you need to input, click on the input box. A screen keyboard will
automatically be displayed. (Every input method has its own unique screen
keyboard).For instance:
Press the return key to close the screen keyboard after finishing the input.
Input Text:
1. Tap the text field.
2. Tap the screen keys on the keyboard.
Shift key, tapping shift key can switch the
Type in capital letters
uppercase and lowercase.
Delete character, tab
key to delete a character, if
Delete character
you want to delete many characters, tap this icon
14
Android IP Video Phone D800 User Manual
for a long time.
Type in digital,
punctuation and
symbols
Space
Enter
Tap
key to switch to digital, punctuation and
symbols input interface.
Space symbol.
Enter symbol, tap this key to switch to next line.
Status Bar
All of the status information about Android IP Video Phone D800 is displayed
on the top of the screen. You can click on the notification icon in the left of
the status bar or drag down the drop-down list with your fingers to enter the
notification panel to further review and deal with all of the information.
Note: The right icon of the status bar can’t be drag, just the left can.
Status bar
Meaning
The rig The right icon of the status bar
Indicates that the phone is in the handset
Handset mode
mode.
Indicates that the phone is in the headset
Headset mode
mode.
Shows that the phone is in silent mode.
This mode can be canceled by directly
Silent mode
clicking the mute button when the
screen is in the idle interface.
Hands-free mode
Indicates that the call is in hands-free
status.
Alarm clock
If you set an alarm clock, the alarm
clock icon will display on the status bar.
The left icon of the status bar
Network
status (successful)
Network status
(failed)
USB
Displays that the network connection is
successful. Tap the icon directly into
the network settings.
Shows no network connection. You
need to check the network is properly
connected and the parameters are
configured correctly.
Displays that the phone successfully
identifies the USB device. Tap the icon
directly to switch into the USB
application wizard.
15
Android IP Video Phone D800 User Manual
New call
Missed call
Do not disturb
When the phone has a new call, it will
appear in the status bar.
Shows that there are several missed
calls. You can click on the icon
directly to switch into the call log.
Shows that the phone is on Do Not
Disturb mode. Any of the call could be
directly rejected before it’s ring
interface appears. There is only a
missed call icon leaving in the status
bar.
Call forward
Shows that the call forward function is
opened.
Auto answer
Shows that the auto answer function is
opened.
Black list
New record
If a phone number is
added to the firewall, then open
the firewall function, all calls about this
phone number could be rejected
directly.
Indicates that there are several new
unread phone recordings.
Main Screen
Android IP Video Phone D800 will go directly to the main screen after
rebooting.
The main screen contains three idle interfaces. Each one can display some
programs shortcuts. You can switch the desktop just by moving your fingers on
the screen to left or right.
Default Screen:
16
Android IP Video Phone D800 User Manual
The idle interface
The icon at the upper left of the idle interface is the phone status icon. It can
display some state including network connection status and the registration
status of each line in time.
You can slide your fingers on this interface to glance over all of the
applications. You can click on some program icons to open the corresponding
application program.
The application program interface
If you want to delete application shortcuts on the idle interface, you can long
press the shortcut, and then put it into the dustbin at the bottom of the interface.
(Note: Let it go just as the icon and the dustbin turned red as is shown at the
17
Android IP Video Phone D800 User Manual
following picture.)
The Application of Android
IP
Video
Phone
D800’s Function:
Click this icon, and it will switch to pre-dial interface. You can
make some phone calls through the screen or keyboard.
Phone
Email
Has the function of sending and receiving e-mail. When an
account has been configured successfully, you can send and
receive your e-mail on the phone and this account will
automatically sync the contacts to the mailbox account.
It contains System, Network, Account, Call, Display and so on.
You can configure some settings.
Settings
Work with simple calculation operations such as add, subtract,
multiply, divide and some advanced operations.
Calculator
Note pad
Record a number of important events or you can record
information such as phone number when press the "Note pad"
during a call.
18
Android IP Video Phone D800 User Manual
Memory
Key
You can make a rapid call through your contacts in the memory
key.
Support functions such as search, add, remove and edit.
Contacts
You can surf the internet through this browser as convenient as
a computer.
Browser
Provide call recording and the ordinary recording.
Recorder
Alarm
Clock
Android
settings
Gallery
You can set your own time and the alarm will remind you at
your appointed time.
It contains the Call settings, Basic settings, Advanced settings,
VOIP and so on, you can configure some settings in the
corresponding menu.(Android system settings)
View photos stored on the phone, or through the USB storage
device storing photos or videos, you can enter the photo gallery
for dynamic playing.
You can easily manage the files.
File
Manager
Through the camera you can take High-definition pictures and
make other operations.
Camera
19
Android IP Video Phone D800 User Manual
Like the mobile phone, with messages to write, read and send
function.
Message
Music player. It can play music in various formats.
Music
All calls will be transferred into voice mail when the MWI is
enabled.
MWI
Calibrate the screen to ensure the accuracy of the screen.
Screen
Calibration
Enter into the calendar and you can view the accurate date.
Calendar
Call log
Enter the call log and you can view all call records. You can
also view the "Incoming Calls", "Outgoing Calls" and "Missed
Calls" records by pressing the Option key.
Ping box is the system's built-in toolbox of network testing tool;
You can use it to check whether the network is unobstructed.
Ping Box
The shortcut of close the screen.
Screen Off
The shortcut to reboot the phone quickly.
Reboot
20
Android IP Video Phone D800 User Manual
Desktop Widgets
Operation steps:
Long press the idle screen and the list named "Add to Home Screen" will
appear. Tap the "Widgets" and then choose the widgets you want to display on
the desktop. It is easy to quick operate which saves the time and look beautiful.
It can control the power light to turn on or turn off. If the power
light is turned off, like the first picture. As this time whether
making calls or doing other operations, power light is often
destroyed.
Power
If power light is turned on, like the second picture. As this time
indicator
when the telephone is called or it has missed calls, the power
light will twinkle；when the telephone is calling or in the idle
status, the power light have been always light；when the
telephone has one call, then another call is ringing, the power
light will twinkle.
Idle screen display:
Light off
Light On
Analog clock which looks like a watch can be displayed on any
space of the idle screen; it is convenient for you to check the
time.
Analog clock
Idle screen display:
Digital clock is displayed with white fonts and time or date
could be seen directly. You can move it to any space.
Digital clock Idle screen display:
The default search bar is the Google’s Quick Search Box; You
can enter any content you want to search.
Idle screen
Search
display:
21
Android IP Video Phone D800 User Manual
It controls four functions: DND, Call forward, Auto answer,
Blacklist. You can make some settings quickly just by clicking
the button to turn on or turn off the function.
Idle screen display:
Call set
This widget shows the network connection status and the
registration status of each line.
network connection status:
It shows the network connection modes and IP information if it
is successful. But it shows "Network disconnect" once it is
failed.
Registration status：
lamp
gray
red
Phone status
green
yellow
Contents of
registration
null
phone number@
server address
phone number@
server address
phone number@
backup server address
Status
not registered
Failed
successful on the main
server
successful on the
backup server
Idle screen display:
You can display anyone of your favorite picture on the idle
screen through this picture frame.
Picture
frame
Idle screen display:
Using this widget, you can listen to your music quickly and
enjoy your life easily at any time.
Music
Idle screen display:
22
Android IP Video Phone D800 User Manual
View the date, add activities and remind, etc.
Calendar
Idle screen display:
Long press the idle screen, and the "Add to Home Screen" list will be popped
up, tap "Folders" and enter to the "Select folder" list, select the appropriate file
to add to the desktop:
New
folder
You can move the application shortcuts on the desktop to the
new folder.
Notes
It will show recently added content's title, tap the title to view
the detailed information.
All contacts
Show all contacts in it.
Starred
contacts
Show favorites contacts in it; tap a contact to view detailed
information.
Contacts
with phone
numbers It will show the contact which has the number and do not show
the contact which has no phone number.
23
Android IP Video Phone D800 User Manual
Settings
Status
Tapping "Settings" can directly enter the default window "Status". It displays
the current state.
Status interface
Configuration item
PPPoE
Meaning
Displays the connection status of the PPPoE, there
are three display states : Disable、Connection and
Connection mode
IP address
Subnet mask
IP gateway
Primary DNS
Secondary DNS
MAC address
Version
the IP address.
Displays the selected network mode, DHCP or Static
IP.
Displays the IP address of the current network
model.
Displays the Subnet Mask of the current network
model.
Displays the default gateway of the current network
model.
Displays the primary DNS server address of the
current network model.
Displays the standby DNS server address of the
current use of the network model.
Displays the current MAC address.
Displays the current version of the phone.
24
Android IP Video Phone D800 User Manual
Phone model
Account
Displays the current phone model.
Displays the current configuration of the Account
and more detailed information will be displayed on
the desktop widget.
Network
Network
Tap "Network"----> "WAN mode" interface, the default interface is "DHCP":
click "Save" button to save successfully after the configuration of each
interface is finished. Then a tip box "save successfully" will be shown.
DHCP interface
25
Android IP Video Phone D800 User Manual
Static IP interface
Configuration
DHCP
Meaning
Under the default situation the phone attempts to
contact a DHCP Server in your network in order to
obtain its valid network settings, e.g. IP address, sub
mask, gateway, DNS server, etc.
Obtain DNS server automatically：If you enable
Static IP
it ,the DHCP server will send the phone the DNS
address which could used by it when it is assigned a
DHCP ip address
If your phone cannot contact a DHCP Server for any
reason, you need to enter the network settings
manually via Static IP Address.
IP address: Input your assigned IP address.
Subnet mask: Input your assigned subnet mask.
IP Gateway: Input your assigned gateway.
Primary DNS: Input your assigned DNS server
address.
Secondary DNS: Input your assigned Secondary
DNS server address.
PPPoE
Tap "Network" ----> "PPPoE". After configuring the parameters, you can click
"Save" button to save successfully.
26
Android IP Video Phone D800 User Manual
PPPoE interface
Configuration
PPPoE
Meaning
User: Input your assigned PPPoE Username.
Password: Input your assigned PPPoE Password.
Auto connect on power up: Whether to
automatically connect PPPoE on power up.
Auto reconnect: When connecting failed whether to
automatically connect PPPoE.
Enabl PPPoE: Whether to enable PPPoE.
After the parameter configuration is completed, if
you do not select "enable PPPoE", then you can
click on the "save" button, it only saves the
configuration parameters; but if you select "enable
PPPoE" and click "save" button, it can
immediately use the PPPoE mode to connect the
network, at the same time it will pop up PPPoE
connection box, clicking the "disconnected" will
pop up PPPoE configuration frame; if you click
"connect", it will reconnect PPPoE; if you click
"Cancel" button, it will only save the
configuration parameters which have been set, not to
enable PPPoE connection.
QoS
Tap "Network"----> "QoS", after selecting or modifying the default settings
click the "Save" button to save successfully.
27
Android IP Video Phone D800 User Manual
QoS-DSCP interface
DSCP is one standard of QoS. It can set the priority of Voice, Video and Signal.
Configuration item
QoS- DSCP
Meaning
Enable DSCP: Enable/Disable DSCP.
Audio RTP DSCP: Set the number of Audio RTP
DSCP.
Video RTP DSCP: Set the number of Video RTP
DSCP.
SIP RTP DSCP: Set the number of SIP DSCP.
Click Next to enter the QoS-WAN VLAN page,
QoS-WAN VLAN interface
VLAN is a group of hosts with a common set of requirements that communicate as if they were
attached to the Broadcast domain, regardless of their physical location. The following table lists
Enable VLAN, then you can set
VLAN ID, the range of ID number is 0~4095; you can also set the priority of
802.1p, the range is 0~7.
Note: You must enable DSCP if you want to set 802.1P priority.
Configuration item
Meaning
Enable WAN port VLAN: Enable/Disable WAN
QoS- WAN VLAN
port VLAN.
WAN port VLAN ID: Set the number of VLAN
ID.
Audio 802.1P priority: Set the priority number of
Audio 802.1p priority.
Video 802.1P priority: Set the priority number of
Video 802.1p priority.
SIP 802.1P priority: Set the priority number of
the instruction of the field about the VLAN Setting.
28
Android IP Video Phone D800 User Manual
SIP 802.1p priority.
Click Next，enter QoS-Port VLAN interface
Port VLAN interface
Port VLAN is based on port VLAN, in the same VLAN port to communicate
with each other.
Configuration item
Meaning
Port VLAN mode: Select the status of Port VLAN
QoS- Port VLAN
mode.
 Disable: Disable Port VLAN.
 Follow WAN: Follow the ID number of WAN.
 Enable: Enable Port VLAN and set the LAN
Port VLAN ID different from WAN.
Port VLAN ID: Set the number of LAN Port
VLAN ID different from WAN.
Click Next, enter LLDP interface,
29
Android IP Video Phone D800 User Manual
LLDP interface
Configuration item
QoS-LLDP
Meaning
Enable LLDP: Enable/Disable LLDP.
Enable learning function: After enabling LLDP
learning function, telephone can automatically
learn the number of DSCP, 802.1p, VLAN ID of
the network. If the number is different from the
number of network, telephone will change its own
value to the value of the network.
Packet interval(s): The time interval of sending
LLDP Packet. Default is 60(s).
Port
Tap "Network" ----> "Port", after selecting or modifying the default settings
click "Save" button to save successfully.
30
Android IP Video Phone D800 User Manual
Configuration item
Port
Port interface
Meaning
RTP port range start:
Set the telephone’s RTP start port. This port is
distributed to dynamic allocation.
(The value is 10000--60000)
RTP port quantity:
Set the maximum number of allocated RTP port.
The default is 200.
Stun
Tap "Network" ----> "STUN", after selecting or modifying the default settings
click "Save" button to save successfully.
STUN interface
31
Android IP Video Phone D800 User Manual
Configuration item
STUN
Meaning
Server address: Configure the SIP STUN server
address.
Server port: Configure the SIP STUN server port.
Accounts
Tap "Accounts"---->"Account1", after setting the parameters you can click the
"More" button to switch to the next page to set; it has a total of five interfaces,
after all the parameters are set, you can click "Save" button to save
successfully. (You can also save single page.)
(Note: The Account1, 2, 3, 4 has the same settings.)
Account page 1
Configuration item
Account
Meaning
Enable registration: Enable/Disable register.
Disable register,
Enable register.
Server address: Set your SIP server address.
It supports the address in the form of domain
name.
SIP user: Input the phone number assigned by
your VoIP service provider. Phone will not
register if there is no phone number configured.
Authentication user: Set your SIP account.
Authentication password: Set your SIP
32
Android IP Video Phone D800 User Manual
password.
Domain realm: Configure the SIP domain name
(You do not need to configure it because the
system will configure automatically).
Account page 2
Display name: Configure the display name, it
allows the English alphabet input (does not
support Chinese).
Server name: Configure the SIP register server
name.
Server port: Configure the SIP register server
port.
Registration expires: Configure the server
registration expire(s), default is 60 seconds. If the
registration time of the server required is greater
or less than the time of the phone to configure,
telephone can automatically modify to the time
limit that server recommended, and register
again.
DTMF type: Select DTMF type, there are four
types:
DTMF_RELAY
DTMF_RFC2833
DTMF_SIP_INFO
DTMF_AUTO
Different server vendors can provide different
models.
RFC protocol edition: Configure the protocol
version of the phone. When your phone needs to
communicate with gateway which uses SIP1.0,
33
Android IP Video Phone D800 User Manual
such as CISCO5300, you need to configure to
RFC2543 to conduct normal communication.
RFC3261 is used by default.
Anonymous call edition: Configure whether to
use anonymous security call. It supports
RFC3323 and RFC3325.
Transport protocol: Configure the transport
protocol, TCP or UDP
Ban anonymous call: Configure whether to ban
anonymous call.
Enable strict proxy: Compatible with special
server. (Using source address of opposite side
when return message, no longer use the address
in via field).
Subscribe for MWI: After successful
registration, you can subscribe to information,
such as someone else's status or voice mail and so
on.
Enable report: Configure whether to support
RFC3581, report mechanism is used in internal
network, and requires a SIP server to support, it
is used for keeping the NAT connect of the
internal network and the external network.
Enable PRACK: Configure whether to support
SIP-PRACK function (used by "Color Ring Back
Tone") Recommend：Use the default
configuration.
Convert URI: When you send URI it will
convert # to %23.
Enable DNS SRV: Configure whether to enable
RFC2782 protocol edition.
Set to make quotation mark to display name as
the phone sends out signal, in order to be
compatible with server.
Enable display name quote: Set to make
quotation mark to display name as the phone
sends out signal, in order to be compatible with
server.
Enable STUN: Enable/Disable SIP STUN.
Enable BLF List: Enable/Disable BLF List.
BLF List number: Input the URL of BLF List.
Enable session timer: Enable/Disable session
timeout.
34
Android IP Video Phone D800 User Manual
Session timeout(s): Set the time of session
timeout.
Backup server address: Configure a backup
server address. When the primary server is not
connected, you can use the backup server for
calling communications (The backup server can
be connected only when the primary server
cannot connect); When the primary server is
connected, the phone will automatically switch
back to the primary server to communicate.
Backup server port: Configure the backup
server port.
Call
After configuring the parameters of each interface, you can click "Save"
button to save successfully.
General
Tap "Call" ----> "General" interface. After configuring the parameters, you
can click "Save" button to save successfully.
General interface 1
Configuration
General
Meaning
Do not disturb: Enabled the "DND",
the phone will not allow incoming
phone calls, but the notification about
35
Android IP Video Phone D800 User Manual
missed calls will be displayed at the
status bar.
Enable call waiting: Set whether to
enable the call waiting function.
Default calling mode: Set the default
call mode of the phone, Audio or
Video.
Default answering mode: Set the
default answer mode of the phone,
Audio or Video.
Display caller address: After enabling
the call attribution show, and when a
call comes in, the incoming interface
can display the attribution information
of the caller’s number.
Auto answer timeout: Set the "Auto
answer timeout".
General interface 2
Enable password dial: Enable/Disable
password dial.
Password dial prefix: Input the
password prefix, such as 138.
Password length: Input the length of
number you want to hide. Such as 3.
So if your enable the password dial and
want to dial the number 13812054896,
You set the password prefix is 138,
password length is 3, then when you
dial the number, the screen will show
138******54896.
36
Android IP Video Phone D800 User Manual
Hide DTMF: Select "All "or "Delay" or
"Disabled".
 If you select "Disabled", then when
you use DTMF to input number, the
number will display as what you
input.
 If you select "All ", then when you
use DTMF to input number, the
number will all display as *.
 If you select "Delay", then when you
use DTMF to input number, the
number will delay to display as *.
Auto answer mode:
Hansfree: Use Hadsfree to auto answer.
Headset: Use Headset to auto answer.
General interface 3
Hide local area code: After enabled,
when there is a call, the screen will not
display the local area code.
Country code: Input the Country code,
e.g. China is 86
Area code: Input the Area code, e.g.
Beijing is 10.
Call waiting response code: Choose call
waiting response code, 180 or 182.
Dial plan
Tap "Call"----> "Dial plan" interface. After configuring the parameters, you
37
Android IP Video Phone D800 User Manual
can click "Save" button to save successfully.
Configuration item
Dial plan
Dial plan interface
Meaning
Enable E164: Enable/Disable E164. After it is
enabled, it will directly dial numbers according
with E164 rules.
Press # to send: Enable/Disable. After enabling
the function, input the number end with "#" in the
non-pre-dial mode, it will directly dial the phone
number.
Dial fixed length to send: Enable/Disable. After
enabling the function, inputting the number of
specified length in the non-pre-dial mode will
make the call directly.
Send after (3-99): Enable/Disable. After enabling
the function, input the number in the non-pre-dial
mode, it will dial the phone number in the
specified time.
Dial prefix: Enable/Disable. After enabled the
function, it will be automatically added the outside
line prefix number before the outgoing number
when you are going to call.
Method to use the prefix: Example
If you set the prefix is 135856, and you want to
dial the number 13585679801. Then when you dial
the number, you can long press 0, when the
“+”appears, you can just input 79801and send the
number, the “+79801” is the numb you input, but you can
see the dialing number is 13585679801.
38
Android IP Video Phone D800 User Manual
Account
Tap "Call "----> "Account 1, 2, 3, 4". After configured the parameters, you
can click "Save" button to save successfully.
Configuration item
Account
Account interface 1
Meaning
Call forward: Enabled/Disable Call forward
function. (You can select "Always" , "No answer" ,
"Busy" and "Close forward")
Forward number: Set the forward number for
each SIP line.
MWI number: Set the voicemail number for each
SIP line.
Hotline number: Set the hotline number for each
SIP line.
Warm line wait time (0-99): Set the waiting time
of the hotline number after hooking off ,pressing
the speaker or headset , if the timeout number is
not set, the default time is 0, and then it will
immediately call the hotline number.
Enable auto answer: Whether to enable "Auto
answer" function.
39
Android IP Video Phone D800 User Manual
Configuration item
Account
Account interface 2
Meaning
Display PAI number: Whether to display the PAI
number. Support the standard ISP number, if not
enabled, when there is a coming call, the screen only
displays the last few digitals.
User is phone: After enabling, you can input the
phone number directly; or you must input the
country code and the area code.
Display
Tap "Display" ----> "Display" interface. After configuring the parameters, you
can click "Save" button to save successfully.
Screen
Tap "Display settings"----> "Screen saver" interface. After configuring the
parameters, you can click "Save" button to save successfully.
40
Android IP Video Phone D800 User Manual
Configuration item
Screen saver
Screen saver interface
Meaning
Mode: Enable/Disable. After enabling this
function, the LCD screen will be the state of the
screen saver mode after the specified time. There
are three types of screen saver ("Disabled",
"Album" and "Clock") for you to choose.
Timeout: Input the waiting time after enabling the
screen saver mode, the default unit is minute.
Deactive period: Set prohibit operation period and
other related parameters.
Hibernate
Tap "Display settings" ----> "Hibernate" interface. After configuring the
parameters, you can click "Save" button to save successfully.
41
Android IP Video Phone D800 User Manual
Configuration item
Hibernate
Hibernate interface
Meaning
Enable hibernate: Enable/Disable. After enabling
this function, the LCD screen will be the state of
the hibernate mode after the specified time.
Hibernate timeout: Input the waiting time after
enabling the hibernate mode, the default unit is
minute.
Display
Tap "Display settings" ----> "Display" interface. After configuring the
parameters, you can click "Save" button to save successfully.
Display interface
42
Android IP Video Phone D800 User Manual
Configuration item
Display
Configuration item
Display
Meaning
Animation: Set the window animation mode, there
are three kinds of mode ("No animations", "Some
animations" and "All animations") for you to
choose.
Brightness: Regulate brightness of screen display.
Power indicator interface
Meaning
Power state: Enable/Disable the Power LED.
Missed calls: Enable missed calls and power state is
enabled, when there is a missed call, the Power LED
will blink.
MWI: Enable MWI and power state is enabled,
when there is a MWI, the Power LED will blink.
SMS: Enable SMS and power state is enabled, when
there is a message, the Power LED will blink.
Push-News: Enable Push-News and power state is
enabled, when there is a push-news, the Power LED
will blink.
Sound
Tap "Settings" ----> "Sound" interface. After configuring the parameters, you
can click "Save" button to save successfully.
43
Android IP Video Phone D800 User Manual
Tone
Tap "Sound settings" ----> "Tone" interface. After configuring the parameters,
you can click "Save" button to save successfully.
Configuration item
Tone
Tone interface
Meaning
Phone ringtone: Set telephone ringtone of
incoming calls.
Notification ringtone: Set notification ringtone of
the telephone.
Audible touch tones: Enable/Disable. After
enabling the function, when you use a dialing
keyboard it can play sound.
Audible selection: Enable/Disable. After enabled
the function, when you select the screen it can play
sound.
Volume
Tap "Sound" ----> "Volume" interface. After configuring the parameters, you
can click "Save" button to save successfully.
44
Android IP Video Phone D800 User Manual
Configuration item
Volume
Volume interface
Meaning
Ring volume: Adjust the volume size of incoming
call.
Notification volume: Adjust the volume size of
notification.
Media volume: Adjust the volume size of media.
Enable silent mode: Set whether to enable Silent
mode. After enabling the function,
all sounds will not take effect expect media volume
and alarm clock.
Language
Tap "Settings" ----> "Language" interface. After configuring the parameters,
you can click "Save" button to save successfully.
45
Android IP Video Phone D800 User Manual
Language interface
Date & time
Tap "Settings" ----> "Date time" interface. After configuring the parameters,
you can click "Save" button to save successfully.
Configuration item
Date & time
Date & time interface
Meaning
Enable DHCP time: Enable/Disable DHCP time.
After enabling, the phone will automatically
synchronize the network time in a certain period of
time.
NTP server: Configure SNTP server address of
the phone to get the current time.
46
Android IP Video Phone D800 User Manual
Timezone: Select the current time zone.
Time format: Select the current time format. You
can choose "Use 12-hour format" or "Use 24-hour
format."
Date format: Select the current date format. There
are three types for you to choose ("Year - Month Day", "Day - Month - Year" or "Month - Day Year").
Manually set time: You can manually set the
current date and time.
Maintain
Update
Tap "Settings" ----> "Maintain" ----> "Update" interface. After configuring the
parameters, you can click "Save" button to save successfully.
Fanvil endpoint supports PnP and DHCP and Phone Flash to obtain the
parameters. The PnP and DHCP and Phone Flash are all deployed, endpoint
will go by the following process to try to obtain the server address and other
parameters, when it boots up:
DHCP option 

Tap "Update", enter the PNP interface:
Plug and Play interface
47
Android IP Video Phone D800 User Manual
Support Common CFG file and MAC-Oriented CFG file and ID-Oriented
CFG file auto provision. The endpoints download Common CFG file firstly,
and then download MAC-Oriented CFG file or ID-Oriented file.
Configuration
Plug and play
Meaning
Enable PNP: Enable/Disable PNP. Enable PnP by
selecting it, then the phone will send SIP
SUBSCRIBE messages to a multicast address
when it boots up. Any SIP server understanding
that message will reply with a SIP NOTIFY
message containing the Auto Provisioning Server
URL where the phones can request their
configuration.
PNP server: Input the PNP Server name. The
default is 224.0.1.75. It depends on your
environment.
PNP port: Input the PNP port number.
PNP transport: Select the transport protocol,
“TCP” or “UDP”
PNP interval (h): Input automatic update interval.
Unit is hour.
Update-DHCP
Support Common CFG file and MAC-Oriented CFG file and ID-Oriented
CFG file auto provision. The endpoints download Common CFG file firstly,
and then download MAC-Oriented CFG file or ID-Oriented file.
Configuration
Meaning
DHCP option setting: Select "DHCP Option
DHCP
43","DHCP Option 66" or "DHCP Option
Custom".
48
Android IP Video Phone D800 User Manual
Custom DHCP option: After select "Custom
DHCP option", you need to input the DHCP value.
A valid Custom DHCP Option is from 128 to 254.
The Custom DHCP Option must be in accordance
with the one defined in the DHCP server.
Update-Phone flash
Support Common CFG file and MAC-Oriented CFG file or Custom CFG
file. If customer deploys Custom CFG file name in the web page, the endpoint
will download Custom CFG file. If customer doesn’t deploy Custom CFG file
name, the endpoint will download MAC-Oriented.
Configuration
Meaning
Server address: Set FTP/TFTP/HTTP server IP
Phone flash
address for auto update. The address can be IP
address or Domain name with subdirectory.
Protocol type: Select Protocol, including
"FTP","TFTP","HTTP", and “HTTPS".
Username: Set FTP server Username. System will
use anonymous if username keep blank.
Password: Set FTP server Password.
49
Android IP Video Phone D800 User Manual
Phone flash2
Update--Phone flash 2
Config file name: Input MAC-Oriented
configuration file or defined configuration name of
user.
Commen cfg encrypt key: Input the Common
Encrypt Key, if the Common Configuration file is
encrypted. The keys must be 64 characters and the
supported characters are: 0 ~ 9, A ~ F, a ~ f.
Config encrypt key: Input the Encrypt Key, if the
configuration file is encrypted.
Update mode: Different update modes:
1. Disable: means no update
2. Update after reboot: means update after reboot.
3. Update at time interval: means periodic update
Update interval time(h): If you select Time
Interval，you should fill out the update time, unit is
hour.
Service port
Tap "Maintain"---->"Service port" interface. After configured the parameters,
you can click "Save" button to save successfully.
50
Android IP Video Phone D800 User Manual
Service port interface
Configuration
Service port
Meaning
Web server type: Select "HTTP" or "HTTPS".
After selecting one server, you can use the selected
server to login the telephone’s web page.
Such as: https://192.168.1.20
HTTP port: Input server port, default is 80.
Password
Tap "Maintain"---->"Password" interface. After configured the parameters,
you can click "Save" button to save successfully.
51
Android IP Video Phone D800 User Manual
Password interface
Configuration
Password
Meaning
Current Password: Default password: 123456.
New password: Input your new password.
Confirm password: Input your new password
again.
Reset phone
Tap "Maintain"----> "Reset phone" interface. After configured the parameters,
you can click "Reset phone" button to reset successfully.
Reset phone interface
52
Android IP Video Phone D800 User Manual
Configuration
Reset phone
Meaning
Input the password, default is 123456.
Reset phone: Click "Reset phone" to reset.
CWMP set
Tap "Maintain"----> "CWMP set" interface. You can input the password to
enter the configuration interface.
CWMP set interface 1
Configuration
Reset phone
CWMP set interface 2
Meaning
Enable TR069: Enable/Disable TR069, you can
select China Telecom or Normal.
53
Android IP Video Phone D800 User Manual
ACS Server: Input the ACS Server address.
Account: Input the ACS Server Account.
Password: Input the ACS Server password of the
account.
Serial Number: The serial number is specified by
the server.
Auto connect: After Enabling TR069 Auto Login,
you can input the account and password.
Audio
Touch "Settings" ----> "Audio", enter the detailed view.
Audio
Touch "Audio"----> "Audio" interface. After configuring the parameters, you
can click "Save" button to save successfully.
Audio interface
Configuration item
Audio
Meaning
First codec: Set the first priority in the use of
voice coding. Default is G.711U.
Second codec: Set the second priority in the use of
voice coding. Default is G.711A.
Third codec: Set the third priority in the use of
voice coding. Default is G.729AB.
Enable VAD: Whether to enable VAD. (Voice
Activity Detection); If you enabling VAD function,
54
Android IP Video Phone D800 User Manual
then the G.729 payload length cannot be set greater
than 20ms.
Audio param
Touch "Audio"----> "Audio param" interface. After configuring the
parameters, you can click "Save" button to save successfully.
Audio param interface
Configuration item
Audio param
Meaning
G729 payload length: Set G729 codec payload
length.
DTMF payload type: Set DTMF payload type,
values between 96 and 127.
ILBC payload type: Set ILBC payload type,
values between 96 and 127.
ILBC payload length: Set ILBC payload length.
G723.1 bit rate: Set the rate of G723.1, you can
choose 5.3kb / s or 6.3kb / s.
Video
Touch "Settings" ----> "Video" and enter the settings interface.
55
Android IP Video Phone D800 User Manual
Video param
Touch "Video"----> "Video param" interface. After configuring the parameters,
you can click "Save" button to save successfully.
Configuration item
Video param
Video param interface
Meaning
First video codec:
Set the first priority in the
use of video coding.
Second video codec: Set the second priority in the
use of video coding.
Third video codec: Set the third priority in the use
of video coding.
H.264 payload type: Set payload type of H.264,
value between 96 and 127.
MPEG4 payload type: Set payload type of
Mpeg4, value between 96 and 127.
Bandwidth
Touch "Video"----> "Bandwidth" interface. After configuring the parameters,
you can click "Save" button to save successfully.
56
Android IP Video Phone D800 User Manual
Configuration item
Bandwidth
Bandwidth interface
Meaning
Video bit rate: Set receiving video bandwidth in
video calls. You can choose 9 kinds of video
bandwidth types ("64Kbps", "192Kbps",
"256Kbps", "384Kbps", "512Kbps", "768Kbps",
"1Mbps", "1.6Mbps", or "2Mbps).
Video resolution: Set video encoding resolution in
a video call. You can choose 4 types of video
resolution ("QCIF (176*144)", " CIF (352*288)"
"VGA(640*480)"or " 4CIF (704*576)").
Settings
Tap "Settings" ----> "Blacklist" interface. Enable blacklist.
57
Android IP Video Phone D800 User Manual
Blacklist interface
Delete selected status interface
Configuration item
Meaning
Enable blacklist: Whether to enable the blacklist.
Blacklist
After enabling the function, there will be a
notification note in the status bar. When a number
is added to the firewall, the telephone will
automatically reject all incoming calls of this
number, at the same time there won't be any note.
Blacklist item: Input the number you want to add
to the Blacklist.
Add: Add the number into "Blacklist".
Delete: Select one of telephone information, click
the "delete" button to remove this number from the
Blacklist.
Delete All: Delete all phone number from the
Blacklist.
Next page: When the "Blacklist" number is more
than one page, you can tap "Next page" button.
Previous page: When the number you added is
more than one page and then you can tap "Previous
page" button.
M/N: M represents the current number of pages; N
represents the total number of pages.
58
Android IP Video Phone D800 User Manual
Action url
Configuration item
Meaning
Active URI Limit IP：Specify the server IP that
remote control phone for corresponding operation.
Action url：Specify the Action URL that Record the
operation of phone, send these corresponding
Action url
information to server, url ： http://InternalServer
/FileName.xml? （ InternalServer is server ip ，
FileName is name of xml that contains the action
message ）
Phone Application
Phone
59
Android IP Video Phone D800 User Manual
This terminal support VoIP to communicate with each other.
Dialing
 Dialing on the dialer view
You can directly dial a phone number.
1. Press the phone icon in the idle.
2. Select the line to dialing (SIP1, SIP2, SIP3, SIP4）.
3. Enter telephone number on the keypad, if it is wrong, you can select
to
delete. If you want to delete the entire input, please long press
.
4. To make a call, perform the following steps:
5. Enter the full number, tap the "Audio" or "Video" button; In the talking
state, the icon
will be shown.
 Use the memory key
1. Press the "Memory key" icon
in the launcher.
2. Tap the contact you want to call and tap "OK" button or double-click the
contact;
3. Tap the "Video" or "Audio" button to dial.
 Use the call log
1. Press the "Call logs" icon
in the launcher.
2. Select the number you want to call, when the content is larger than one
screen, use a finger sliding up and down the screen to view.
3. Tap the audio call button
or video call button
on the right, and
select a line to dial (SIP1, SIP2, SIP3, SIP4).
You can also use the R/send key. In the dialer view or the standby, press the
R/send key will dial the call log number in the last breath.
 Use the contacts
Touch the Contacts icon
in the launcher, or enter the dialer view, tap
the "Contacts" tab, select a contact you want to call, a context menu will be
shown, select the "Call contact" and select a line to dial.
Answer the ringing
1. When you receive a call from the contact occurs when talking views
displays the caller's local picture, name, phone number and location as shown
in Figure:
60
Android IP Video Phone D800 User Manual
2. When you receive an incoming call that is not from a stored contact, the
call will appear on the screen of default contact picture, phone numbers and
the location (need to be opened in the Call settings), the name will be
displayed as Unknown.
Ringing view (Unknown contact)
Ringing view (Known contact)
3. In the ringing view, you can choose "forward", "Video", "Audio" or
"Reject", just press the corresponding button or the soft key to choose.
Call options
 Video call
You can make a video call by the following way:
1. If the remote terminal supports video calls, you can tap the "Video" button
to enter the video call.
61
Android IP Video Phone D800 User Manual
Video calling interface
Video talking interface
2. Tap the video button
to start a video invite in the audio talking,
waiting for the "Accept" of the others to enter the video call.
3. When you receive a remote video invite in the audio talking, tap the
"Accept" button to enter the video call.
4. In the video talking, press button
video.
to switch the different views of
5. If you want to go back to the audio talking, tap the button
.
Note:
If you want to enter the three-ways conference from video talking, the video
62
Android IP Video Phone D800 User Manual
will be stopped first. The conference cannot support video call.
 Call recording
You can press the button
to record the talking, the view
shown, and the record button will turn
Press the button
will be
.
to stop recording. The record file will be shown in the
"Talking record" content of the Record application, and the
will display
at the status bar.
 Hold/Resume the call
1. When during a call, press the Hold button to put your active call on hold.
2. If there is only one call on hold, press the Resume button to retrieve the
call.
3. If there are more than one call on hold, press the Up/Down key to highlight
the call , then press the Resume button to retrieve the call.
Note: When you are under the call hold status, putting down the handset,
the conversation
 Call mute
During the talking, you can tap the button
to mute the call, then the
remote cannot hear your voice, but you can hear the others’. The button will
turn
in the mute state; tap again will recover the talking.
 Attended transfer
You can complete the Attended transfer by the following ways:
1. A and B is on an conversation, A press Transfer Button to put B on hold,
then A can dial the third telephone number C (or press Memorykey to enter
the MemoryKey list, then choose a record) and press the SEND button to call
out.
2. Enterprise IP Phone Using the Basic Call Functions After C answered it, A
and C can have a private conversation without B hearing it, then A press the
Transfer button to complete the transfer.
3. A will be disconnected from the call. B can talk to C.
 Blind transfer
1. A and B is on a conversation, A press Transfer Button to put B on hold,
then A can dial the third telephone number C (or press Memorykey to enter
the MemoryKey list, then choose a record) and press the Transfer button or
"#" or hung up to call out. A will turn to the hold status, and the LCD will
display as Transferring.
2. After the C answered it, or A press the Cancel key to complete the transfer.
3. A will be disconnected from the call. B can talk to C.
63
Android IP Video Phone D800 User Manual
4. If C refused to answer the call, it will prompt A that the transfer operation
is failed. This function should be supported by server.
 Three-ways conference
To establish a conference:
1. Press the NewCall button during an active call.
2. Dial the number to C, then press the R/Send key or Video button or Audio
button.
3. When the call is answered, press the Conference button, select the number.
4. If you want to stop conference, press "split" button to stop three-ways
conference.
The figure:
 Multi-line calls
This phone supports multi-line calls. When there are two or more calls, you
can tap "Transfer" or "Conference" button and select "New call" to make a
new call, and it can support up ten calls exists at the same time. The current
talking will be highlight shown. You can press the small contact card of the
other call and resume it.
MWI
Go to "Settings"—"Call"—"MWI number", input MWI number to listen to
the message.
If you have new MWI message, then
1. The status bar will appear the
, you can click it to pop-up the
detailed box, it contains "Account"----which number has the messages,
"Old"----already read messages, "New"----not reading messages.
2. And
then click the
to dial the MWI number.
3. You
may be prompted to enter the password which is needed to connect to
64
Android IP Video Phone D800 User Manual
your VoIP telephony system. It depends on your system.
4. Your voice mailbox is called and you are able to listen to your new and old
messages.
Note: Need server supports.
Contacts
Telephone contact address book. A contact can store more than one number,
email and house information.
Search contacts
You can search the contacts on the VOIP by the contacts’ first letter (Chinese
names are searched by its first letter of the alphabets).
1. Tap the contacts button;
2. Tap the "Search" button, or press
, then tap the search button
,
input the name of the contact you are searching for.
As you type, contacts with matching names appear below the search box.
For example, the contact name is Fanvil, and number is 123456, then input F
in the search box, you will see Fanvil in the search box. When more than one
message matches your input, all will be displayed.
3. Contacts with matching names may appear below the search box when you
are typing in. For example, you have the contact with name "Fanvil" and
number 123456. You will see "Fanvil" below the search box after you have
inputted "F". It will display more than one message if more names match with
the letter "F".
4. Tap the correct contact in the list to open its detail.
New contact
1. Tap the contacts button.
2. Tap the “New” button or press Option
and tap New contact button.
3. Add a picture for a contact. Tap
into the picture selection interface to
select photos in your list of photos when editing contacts. It will automatically
return to the editing interface after you save it. If you want to change the
picture, tap the Contacts icon to select "use this photo", "delete the icon" or
65
Android IP Video Phone D800 User Manual
"change the icon".
4. In the given and family name field, input the contact's given and family
name, and then add the contact's phone, e-mail and other information. Tap a
category’s plus button
to add the other item options in every application.
For example, you can add both work and home numbers by pressing this
button.
5. When you have finished it, tap Done button.
Figure:
Contacts interface 1
Contacts interface 2
Delete a contact
Two methods:
Method one:
1. Tap "Contacts" button.
2. Tap the "Delete" or press
and tap "Delete Manager".
66
Android IP Video Phone D800 User Manual
3. Select the contact you want to delete, and then press "Delete" button to
delete or you can bulk delete, by tapping the right button of the contact you
want to delete, to make the state checked just as
4. Press "Option" button
.
and tap "Delete Manager" button .If you want
to delete all, tap "Select All", all contacts will be checked, and then press
"Delete" button to delete all contacts.
Method two:
1. Long press one "Contact", then the contacts edit list will be popped up. You
can just tap "Delete contact".
2. Then a selection box will be popped up and you can click "OK" to delete or
tap "Cancel" to return to the contact interface.
Set a ringtone for a contact
1. Tap "Contacts" button.
2. Tap the name of a contact in the list.
3. Press "Option"
and tap "Options".
4. Tap "Ringtones" and select the ringtone that you want in the pop-up box.
5. Tap "OK" button. When the contact calls you, it will play the ringtone just
set.
Add contacts to the blacklist
1. Tap "Contacts" button;
2. Long press the name of a contact and select "Add to blacklist";
3. Under the idle interface, tap "Settings"---"Blacklist", select "Enable
blacklist", then the number in the blacklist will not come in. But our phone
has the missed call prompt.
Add a contact to your favorites
You can add contacts to your favorites, so that it will be convenient for you to
contact them.
1. Tap "Contacts" button.
2. You can add the contact to your favorite just by tapping the star icon
on the right until it turns to
. You can also long press one contact and
tap "Add to favorites" in the prompting box.
Set a default phone number for the contact
When a contact has more than one phone number, it will not be convenient for
you to call him/her, so you can set a default phone number to solve this
problem.
1. Tap "Contacts" button.
2. Tap the name of a contact in the list that you want to set a default phone
67
Android IP Video Phone D800 User Manual
number for it.
3. The view will display many numbers of this contact. Long tap the number
you want to set as the default phone number and select "Make default
number" in the prompt box. Then the default phone number is marked with a
checkmark
.
4. Later to make a call through the contacts, you can call directly the
default number just set.
Import/export contacts
Tap "Contacts", and then tap the "I/E port" button or press Option key
.
Then select the "Import/Export" label, you can choose to import or export at
the option box "Import/Export contacts".
1. Import: You can select the way to import (from SD card or USB) from the
option box "Import/Export contacts". Choose to importing one, multiple or all
vCard files in the following option box, and then select the file which you
want to import.
2. Export: You can select the way to export (to SD card or USB) from the
option box "Import/Export contacts" if there are some contacts in the
"Contacts". Press "OK" to export the file in the option box "Confirm export".
The file will be named by the current time and stored at root directory of USB
or SD card.
3. It supports three formats to import or export, vcf/csv/xml format.
Contacts Group
You can add contacts to a group specified, and then you can easily send a
message to all members of the group.
Tap
to switch to Contacts group interface (You can also switch to the
full screen).
 New Group
1. Touch "New Group".
2. Input the new group name then touch "OK".
3. If the Contact group list is too long, you can tap
to scan the group
quickly.
 Edit Group
1. Long press one group, you can select “Modify Group Name”, “Add Group
Member” and “Delete Group”;
2. Tap “Modify Group Name”, you can rename the group.
3. Tap “Add Group Member”, you can select the contact you want to add,
then click the “Add” button to save.
68
Android IP Video Phone D800 User Manual
4. Tap “Delete Group”, you can delete the current group; if you want to delete
many groups, you can tap the Del Group to select groups to delete, when the
turns to
, then select “Delete”.
5. If a group has a few contacts, long press the group, you can also select
"Remove Group Member" or "Add Group Member Ringtone" to operate.
Call logs
The Call logs are a list of all the calls you’ve dialed, received, or missed. It
offers a convenient way for you to R/send a number, call back, or adds a
number to your contacts.
The figure:
Interface of all calls 1
Interface of all calls 2
69
Android IP Video Phone D800 User Manual
To view missed calls
When you have some missed calls, the status bar will show us the missed
call icon
, open notification panel and touch "Missed call" to view all of
the missed call. Open Call log you can tap
or have the Phone /Contacts
tab opened, and then touch the Call log tab. The recent call records are
displayed. The missed call would be marked with icon
Option key
. You can also press
and touch "Missed Calls" to view all missed calls.
Other actions on a Call log record
In the call log interface, you can touch a Call log record to open an option box
where you can call the contact again, send the contact a message, add the
number to your Contacts, and learn more about the original call.
Tap
, the left of the screen will display “All calls”, “InComing Calls”,
“OutGoing Calls” and “Missed Calls”, or you can press Option key
and touch "Incoming Calls", "Outgoing Calls, Missed Calls", and "All Calls"
to view the type you selected.
Other actions on a Call log entry
In the call log interface, you can touch a Call log record to open an option box
where you can call the contact again, send the contact a message, add the
number to your Contacts, and learn more about the original call.
Press "Option" key
and touch "Incoming Calls", "Outgoing Calls,
Missed Calls", and "All Calls" to view the type you selected.
Working with the Call log
Delete the Call log
1. Remove one: Touch the record then touch "Remove from call log" in the
box that opens. You can remove it which you selected from call log.
4. Clear by type: Tap the Delete Manager button, you can select the call logs
that you want to delete; you can also select “Remove all” to clear all call logs;
or you can press "Option" key
and touch "Clear call log", you can
select one or more types you want to clear. When it is finished, touch "OK".
You can also long press one call log, and then select “Delete all call logs of
the same number”, and then the call logs of this number will be cleared.
Dial a number in the Call log
1. Touch the icon
or
at the right of the record, then select a line and
70
Android IP Video Phone D800 User Manual
touch "OK".
2. Touch the record to open a menu with options for communicating with that
contact in other ways.
3. Long touch the record to open a menu with options then touch "Call ***"
or touch "Edit" number before call, it will open the dial-up interface. You can
call the number which you edit and select from call log.
Add a record’s number to your Contacts
1. Touch the record. Touch "Add to contacts" in the menu that opens, in the
list of contacts that opens, touch "Create new contact" at the top, or scroll to
find an existing contact which you want to add the number to.
2. Long touch the record. Touch "Add to contacts" in the menu that opens, in
the list of contacts that opens, touch "Create new contact" at the top, or scroll
to find an existing contact which you want to add the number to.
Add an entry’s number to Blacklist
Long touch the record. Touch "Add to blacklist" in the menu that opens. If
you enable the blacklist function, the call will be denied access.
Memory Key
You can pre-set speed dial buttons for quick dial.
View Speed Dial Information
Touch "speed dial", the terminal will display the current speed dial
information interface 16; the default button on the display is empty. You can
tap the screen at the top of the "1, 2, 3" to switch to another interface.
Speed Dial can be set to a total of 48 speed dial information. If you configure
the speed dial, then the corresponding button on the display you configure the
number corresponding to the name.
You can also use the navigation keys on the terminal to view the
configured speed dial button, orange background that the currently
selected speed dial button.
The figure:
71
Android IP Video Phone D800 User Manual
Speed Dial Management
 Editing Speed Dial
Open your "Memory Key", touch & hold a null button, then touch "Edit".
Add a contact name, number, call the line (SIP1/2/3/4), and call type (video /
voice). Select the Subscribe mode. When you are finished, touch "OK".
1. If you select None, it is just the normal speed dial mode.
2. If you select Presence or BLF, it means that the phone has the function to
monitor the other numbers of other phones.
BLF is also called “Busy lamp field”, and it is used to prompt the user to pay
attention to the state of the object than has been subscribed, and used to
cooperate with the server to pick up the phone call. You can configure the key
for Busy Lamp Field (BLF) which allows you to monitor the status (idle,
ringing, or busy) of other SIP account. User can dial out on a BLF configured
key. Please refer to “LED Instruction” for more detail about the LED status in
different situation.
3. Presence is called present, and compared to the BLF, it can also check
whether object online
Note: You can subscribe the BLF and presence station of the same number at
the same time.
When selected BLF or Presence, you can see the light appears on the button.
And BLF or Presence can monitor the other numbers status by the color of the
light.
72
Android IP Video Phone D800 User Manual
The status of light is below:
The status of the monitored phone
The status of the BLF indicator light
Online、IDLE
Green
Ring
Yellow
Using、Inuse
Red
Offline
Gray
 Deleting Speed Dial
Open your "Memory Key", touch & hold the button you want to delete, and
then touch "Delete". When you are finished, touch "OK".
 Dialing With Speed Dial:
Open your "Memory Key", touch & hold the button you want to dial, then
touch "Dial".
The figure:
73
Android IP Video Phone D800 User Manual
Network Phonebook
Android IP Video Phone D800 terminal can download contacts the from the
Internet where the information stored by the users. If you use Network
Phonebook, you can follow these steps:
1. Configure parameters related to the network phonebook in settings.
Tap "Cotacts"----> "network phonebook".
2. Use the Network Phonebook
Enter your Network Phonebook interface, press "Option" button
tap "Add Accounts". Terminal wills pop-up a Basic Setting list.
and
Basic Setting
Configuration
Account
Meaning
The name of your network phonebook. It will display on
the screen.
Support HTTP/FTP/TFTP/LDAP server.
Protocol Type
The address of your HTTP/FTP/TFTP/LDAP server.
Server
The port of the HTTP/FTP/TFTP/LDAP server
Port
Name of the update file where you put in the
File Name
ServerDirectory.
When your server need authentication, you need to fill
User Name
it. It's server's username.
When your server need authentication, you need to fill
Password
it. It's server's password.
Note: When you use LDAP to download the network phonebook, it will
74
Android IP Video Phone D800 User Manual
appear the follow steps.
Profile
LDAP server's host.
Host
LDAP server's port.
Port
You can just click "Fetch base DNs" to get the "Base
Base DN
DN".
Enable it can make the operational process more safely.
Use secure
connection(SSL)
Credentials
Enable/Disable anonymous.
Anonymous
Simple and DIGEST-MD5.
Mechanisms
Input the authentication name of LDAP server.
Principal
Input the authentication password of LDAP server..
Password
For example:
1. Account : Input what you want. Such as My colleague. So your network
phone book's name is my colleague.
2. Protocol Type: Use LDAP. Click "OK" to the Profile list.
Note: If you select HTTP or TFTP server, you need not input User Name
and Password. But FTP server needs them.
3. Input the Host, such as 192.168.1.206, Port is default, then click Fetch
base DNs, as this time, if you enable Use secure connections(SSL), the
Port will change. Click Next to the Credentials list.
4. Disable Anonymous, then you should select Mechanisms, Principal and
Password. Such as : Select Simple; Principal: adminroot;
Password: admin or you can enable Anonymous, and then just click OK.
The screen will appear the Account that you have filled----My colleague.
You can long press My colleague to Edit or Delete the User.
5. Click My colleague to look up.
6. Now you can long press a contact to make a call or send messages and so
on.
MWI
Easily view voice messages, quickly listen in voice messages.
75
Android IP Video Phone D800 User Manual
Touch the MWI icon
on the home screen or in the Launcher, you can
view voice messages information.
 Set the number to listen in voice messages
Touch "Settings" ----> "Call settings" ----> "MWI", open voice mail settings
screen, then touch "Number to dial for checking MWI", enter the number to
listen in voice messages.
 View and Listen in voice messages
On the MWI screen, you can view count of unread voice messages and count
of read messages when there were voice messages, and touch listen icon
corresponding line to listen in voice message. If you do not set the number to
listen in voice messages, touch
will open a dialog to open voice mail
settings screen or enter numbers in the dial pad to dial.
Detailed:
1. The status bar will appear the
, you can click it to pop-up the detailed
box, it contains "Account"----which number has the messages, "Old"----already
read messages, "New"----not reading messages.
2. And
then click the
to dial the MWI number.
3. You may be prompted to enter the password which is needed to connect to
your VoIP telephony system. It depends on your system.
4. Your voice mailbox is called and you are able to listen to your new and old
messages.
Multi-line operation
Multi-line is to satisfy the multi-way call queuing of some enterprise, that is a
SIP line can accommodate multiple calls, the user can have the option of a call
to operate. A SIP line on this phone most can accommodate ten way SIP calls,
and if there is a call in the call status, other calls will be put on hold.
When in called, you can click on the soft key "New Call" in call interface to
make a new call. If the existing call is no more than ten, when there is a new
call, you can answer the new call by off-hook, press the "Speaker" key, tap the
"Audio" or "Video" key to answer new calls. You can achieve to switch
multiple calls by clicking the small card in call interface to cooperate with four
keys below.
76
Android IP Video Phone D800 User Manual
Other Application
Email
Press the E-mail, the phone will skip to the email interface. The first time used
to configure users a usable account and user name.
As shown in the following image:
Click next, and you will enter the interface of account type selecting. You can
choose among the following three options: POP3, IMAP and Exchange.
Introduction to the configuration of Exchange:
Gmail account
In the Contact interface， you can press Option
and select "account" ---->
"add account" (You can also directly tap "Email" application to enter the
interface );
Input your user name and password, and then click on the "Next";
Domain\Username: gmail.com\username (**@gmail.com);
Password: Input your password;
Exchange server: m.google.com.
QQ account
Log on QQ mailbox in web page, you can click "Settings" ----> "experience
77
Android IP Video Phone D800 User Manual
room" "Exchange mobile terminal synchronization service" ----> "I want to
open";
In the Contact interface you can press
and select "account" ----> "add
account" (or you can directly tap "Email" application to enter);
Input your QQ user name and password, and then click on the "Next";
Domain\Username : gmail.com\username（**@gmail.com）;
Password: Input your password;
Exchange server: ex.qq.com.
Click "Next" to the Exchange server Settings.
After the completion of the configuration, you can click "Next" to the interface
of account options;
In the interface you can choose "Email checking frequency". It contains
"Automatic (Push)", "Never", "Every 5 minutes", " Every 10 minutes"," Every
15 minutes"," Every 30 minutes" and " Per hour" and so on. You can also
choose "Amount to synchronize". It contains "One day", "Three days", "One
week", "Two weeks" or "One month". And you can decide whether to enable
"Send email from this account by default", "Notify me when email arrives" or
"Sync contact from this account".
Click "next" to enter the interface of account names setting, you can set "Give
this account a name (optional)" and "Your name (display on outgoing
message)".
Click "Done", then you can go directly to the inbox interface to view mails.
In the Inbox interface, you can press
, and then choose "Refresh",
"Compose", "Folders", "Accounts" or "Account settings".
The "Folders" contains "Inbox", "Drafts", "Outbox", and "sent", "Trash" and so
on.
78
Android IP Video Phone D800 User Manual
Click on the "Accounts," you can go into the current account interface, and
then press the Option key, you will see "add account" screen. You can add a
new account there.
Long press an email, it will pop up a tip box in which you can choose "Open",
"Delete", "Forward", "Reply all" or "Reply" for operation;
"Account settings" which has been mentioned groups all the Settings together.
We will not repeat it here.
Calculator
The use of the calculator
You can touch the numbers and functions of the "calculator", just like the use
of a standard calculator. If you touch the buttons of addition, subtraction,
multiplication, and division, the display window will show you the
corresponding operation symbols. So you can know the operations to perform.
The Basic panel
Touch "Calculator" to enter the basic panel.
The basic panel includes the most basic functions of the electronic calculators,
which are very simple and practical, such as addition, subtraction,
multiplication, and division.
The Advanced panel
Figure:
79
Android IP Video Phone D800 User Manual
In the basic panel, you can enter the "advanced panel" either by selecting the
"advanced panel" after touching the "Option " button, or sliding your single
finger from right to left; In the advanced panel, you can return to the "basic
panel" either by selecting the "basic panel" after touching the "Option " button,
or sliding your single finger from left to right.
sin, cos, tan
To calculate a numerical value of trigonometric function(sin,
cos, tan)
To input the value of π.
To calculate the factorial of a numeric.
To calculate the natural logarithm of a numeric.
To calculate the logarithm of a numeric.
To input the value of e.
To calculate the n exponent of a numeric.
To calculate the square root of a numeric.
π
!
ln
log
e
^
√
View history
After opening the calculator, you can check the historical data that have been
operated by touching the up and down navigation keys.
Clear history
After opening the calculator, you can press the "Option " button
and
then select "clear history" to clear all of the historical data saved before.
Edit text
When entering text, you can select one input method after long pressing the
input box. If there is text in the input box already, you can choose the following
operations in the pop-up window: "Select all", "Select text", "Cut all", "and
Copy all", "Input method".
Exit calculator
By pressing the "return" key, you can exit and close calculator application.
80
Android IP Video Phone D800 User Manual
Note pad
You can write down a memo for checking at any time.
Add a memo record
You can either touch "Add note", or select the "Add note" after touching the
"Option" button
to enter the interface of "edit notepad". You can enter
the information that you want to record. The memo will be saved if you touch
the return key. If you select "Discard", the memo will not be saved. Then you
will exit from the edit interface. As shown in the following figure:
Besides, you can touch the icon of the notepad to enter the interface of editing
where you can add a memo needed.
View a memo
You can check a memo by touching it after opening the notepad.
Edit a memo
Touch "Note pad", select the memo needed to be modified, touch the "Option"
button
and choose "edit text" to enter the notepad editing screen, after
modification completion, press the return key to be saved, or press the "Option"
button to choose "Discard" don't save exit editing screen.
Edit the title of a memo
Firstly, you need to touch "Note pad "and choose the title needed to be
modified. Secondly, you should press "Option" button
and choose
"Edit the title" in the in the pop-up dialog box. Lastly, you should click "Yes" to
save the new title and exit from the "Edit the title" window.
Besides, you can touch the "Option" button in the text editing screen at first,
and select "Edit title". Then do the above operations.
Delete a memo
You need to touch "Note pad "and choose the memo that you want to
delete .Then you can delete it if you touch the "Option " button and select
"Delete".
Besides, you can delete a memo by choosing "delete" in the pop-up window
after long-pressing on the memo.
Closed notepad
By touching the return key, you can exit the notepad.
81
Android IP Video Phone D800 User Manual
Browser
You can surf and browse web with the terminal just like using a computer.
The default home page is Google search home page; you can change it by
setting.
Open web
For the first time, please touch "Browser" and go into the page, the default
home page is Google search home page. If you have changed it, it will jump
into the home page which is set. The pre-installed browser of android operation
system does not have the feature of auto-exit. When you go into the browser
once again, it may be the last interface before you tap the return key.
Input the website
You can directly input the website you want to scan at the address bar, and then
tap "Go" or
to search in the input box.
If the contents of the webpage are too many, you can quickly click the screen
twice, and then it will zoom in or zoom out.
When you press the
button on the phone, it will show you all
functions of the browser.
If you click "More", it will show you other functions.
If you click "setting", you can set the browser more detailed.
Recorder
You can record at any time and at any place.
Tap "Recorder" to open the recorder application.
The recording documents mainly include "Local Record" and "Talking
Record".
82
Android IP Video Phone D800 User Manual
You can tap "Recorder" application to make local record or you can make
talking record when you have a call.
Add record
You can enter the interface of recording, if you touch "Add a recording" in the
recorder window. Then, you can tap the "Record" button to start recording. If it
is finished, you can tap the "Stop" button to stop. The user can choose "Yes" to
save it or choose "Cancel" to discard it in the pop-up dialog box. As shown in
the following figure:
Play the records
Firstly, you should use the navigation key up and down button to select a sound
recording. And then, you need to touch "Play" button to go into the playing
interface. At last, you should touch "Play" to start. Besides you can touch
"Pause" to stop playing temporarily .In this way, you can realize the switch
between playing and pausing.
You can also directly tap a recording document in your single finger to go into
the playing interface and to play the document.
Delete the records
Firstly, you should use the up and down navigation button to select a recording
documents, and then you just need to touch the "Delete" button to delete the
selected documents.
Backup the records
When you plug in an external device, you can see the tape "backup" option on
the screen. Please touch "backup" and select the recording document needed to
be backed, and then touch "OK" to start. You can also touch "Cancel" button to
cancel the backup.
Close the Recorder
You can exit and turn off the recorder either by touching the return key or click
"Quit".
83
Android IP Video Phone D800 User Manual
Digital clock
By using the digital clock, you can know the date and time more easily.
Digital clock supports desktop widget; it is showed on the idle screen by
default.
It shows the date and the time.
Alarm Clock
Open the Alarm Clock application. By pressing
, you can choose "Add
alarm", "Hide clock" or "Settings". If you select "Add alarm", then you can set
"Time", "Ringtone", "Repeat", and "Label".
"Time" is the alarm time that needs you to set.
"Ringtone" is the alarm’s music.
"Repeat" is that you can set the repeated days you want.
"Label" is the tips you set.
If you select "Hide clock", then the icon of the clock will disappear, you can
also select "Show clock" to make it appear.
If you select "Settings", then you can enter the advanced settings interface.
It includes:
"Alarm in silent mod": Whether to play alarm even when the phone is in silent
mode;
"Alarm volume": Set the volume of alarms;
"Snooze duration": Select the snooze duration.
Gallery
84
Android IP Video Phone D800 User Manual
You can browse photos and videos easily.
Browse Pictures
Tap "Gallery" application, open a gallery album, press "Option" key, select
"Slideshow", then the screen will display the pictures in the form of slide
mode.
You can also manually view each picture by sliding the screen from left to right
or click the left (right) arrow on the screen.
General Settings
Configuration item
Display size
Sort order
Confirm deletions
Slideshow settings
Configuration item
Slideshow interval
Slideshow transition
Repeat Slideshow
Shuffle slideshow
Thumb slides
Meaning
Select the display size of pictures and videos.
Select the sort order of pictures and videos
Show confirmation before deleting a picture or
video.
Meaning
Select how long each slide displays in the show.
Select the effect used when moving from one slide
to the next.
Play slideshow more than once.
Show pictures in random order.
Play slideshow in thumb or full-size.
Batch delete
In a file or directory, press
to select "Multiselect", and then select
images or videos you want, click "Delete" or "Cancel", you can achieve batch
delete or cancel your operation.
Note:
When you view the pictures, you can select "enlarge", "reduce", "Set as
Contact icon or Wallpaper", or you can press
to choose "Rotate",
"Delete", "Crop", "Set as", "Details", "More" to operate the picture.
File Manager
You can easily organize multiple files. The view of the File Manager as the
Figure 1 and Figure 2 are as follows:
85
Android IP Video Phone D800 User Manual
Figure 1
Figure 2
"Figure 1" is showing files as icon, "Figure 2" is showing files as a list, the
form of the list will display the operation time of the file (need to be checked in
the settings). Long press a file, you can select "Open", "Copy", "Cut", "Paste",
"Delete", "Rename", "Select/Cancel" and "Properties" to operate.
By taping the "Multiple" button, multiple files can be selected.
After your taping on the "Up" button, it can return to the previous page.
After your taping on the "History" button, it can show the resent historical of
operations.
After your taping on the "Icon/List" button, it will show files as different view.
By taping the "Refresh", you can refresh the view.
By taping the "More" button, you can do more operations such as "New
Folder", "New File", "Paste", "Search", "APK Manager", "Settings",
"Multiple/Cancel", and "Exit", as shown in the Figure 3:
86
Android IP Video Phone D800 User Manual
Figure 3
New Folder: You can create a new folder.
Paste: Past the copied and cut file.
Search: You can choose "Case sensitive" or "Exact match" to search the files
that match the input.
APK Management：Manage the applications. Follow the steps:
Tap "APK Manager"-->"
"--> you can select "All software, System
software, User software or Refresh List"--> select one application--> pop up a
list--> you can choose "Start Software, Uninstalling Software, Backup
Software or Details", then you can know more details.
Settings: Click to enter the APK Backup Directory, select whether to "Hide
prefix. File", "Display file size (list)" or "Show documents time (list)".
Multiple：Multichoice, when click it, you can select Multiple Files, then long
press screen to open、copy、cut or do other operations.
Exit: Exit from the FileManager application.
Camera
You can take pictures at anytime and share them with your friends.
Photographs
Tap "camera", the phone screen will show camera interface, then tap the photo
button of the lower right corner to take pictures, you can also enlarge on the
image processing before taking pictures, in order to take the result.
In the photo window, users can also tap the "Option" button, select the
"Gallery", it is easy to view all the pictures in the gallery, including
photographs that have been took.
Shooting Set
The user can tap the "Option" button, select "Settings", enter the camera
settings interface, and then you can save photos and conduct the picture quality
settings.
Browse photos
After taking the picture, you can tap the small photo icon of the upper right
corner to view photos.
Users can use finger touch photos, it will shows "amplifier" and "narrow"
buttons, the user can set the picture as wallpaper or contact icon through the
87
Android IP Video Phone D800 User Manual
"amplifier" or "narrow" button.
Tap the "Done" or return button to exit the photo view window.
Photo process
Tap the "Option " button when you view the photos, select "spin", you can
rotate left or right, and it will be automatically saved; or select the "pruning",
and then trim operation is completed, click "save "button to save, or click the"
discard "button to unsaved.
Delete photos
In the photo viewer window, lightly tap the upper right corner of the "delete"
button; you can delete the corresponding photos.
Turn off the camera
In the camera window, tap the "Back" button to exit and close the camera
application.
Messaging
Press “Messaging”，press "New message", then press "New message",
New message interface
To：You can input the phone number or click the contact photo on the screen
to add the number from contact, if you want send to many people, use "," to
divide. Just like 13816547, 15875456, 466565.
88
Android IP Video Phone D800 User Manual
Music
It has high-quality sound, and you may enjoy listening to music in android IP
video phone se780.
Tap "music" to open the application.
View music files
You can view the music files in different statuses by tapping "Artists",
"Albums", "Songs", "Playlists" and "Now playing".
Play music files
Press Option button in the "Songs" interface; you can choose "Party shuffle",
"Shuffle all" or "Play all" according to the different pop-up box.
Long press an artist in the "Artists" interface, then select "Play" in the pop-up
box, you can play all the songs of this artist.
Long press an album in the "Albums" interface, then select "Play" in the
pop-up box, you can play all the songs of this album.
Long press a playlist in the "Playlists" interface, then select "Play" in the
pop-up box, you can play all the songs of the playlist.
Long press a song in the "Songs" interface, then select "Play" in the pop-up box,
then it can be played.
Delete music files
Long press an artist, an album or a song, then select "Delete" in the popup box,
you can achieve the purpose of deleting music files. Pay attention to that the
deleted files are permanently deleted and cannot be recovered.
Search music files
Long press a piece of music file, select the "Search" in the pop-up box, then
select "Browser" or "Music "to search the music files.
Make phone ringtone
Long press a piece of song, select "Use as phone ringtone" in the pop-up box, it
will set the song as the ringtone of phone.
New playlist
Tap "Now playing" to open the music player, then tap the playlist icon to enter
the playing list. You can choose a song and long press it, choose "Add to
playlist" in the pop-up box, and then choose "New". Then a new playlist will be
created.
Or you can tap "Now playing" to open the music player, then press Option key,
chooses "Add to playlist", and then choose "New playlist". Then a new playlist
89
Android IP Video Phone D800 User Manual
will be created.
Add music to playlist
Long press an artist, an album or a piece of song, and select "Add to playlist" in
the pop-up box.
Delete music file from playlist
Enter the corresponding playlist, long press a piece of song file, select "Delete"
in the pop-up box and the music will be deleted successfully.
Or you can tap "Now playing" to open the music player, then tap "Playlist"
button, enter "Now playing" interface, long press a piece of song, and choose
"delete from the playlist", then you have finished the purpose of deleting music
file.
Difference between the default playlist and the list of user-defined
The default playlist can be only played or edited, but the user-defined can be
played, deleted and or renamed.
Music settings
In the "Now playing" interface, you can set the play mode, including "Repeat
off", "Repeat all songs" and "Repeat current song".
Calibration
Screen calibration uses the five calibration method. After using the phone a
long time, there may be inaccurate, then set the "upper left", "upper right" and
"left down" and "right down" and "middle" five icons through the screen
calibration procedures to adjust the screen, and let the screen in a state of
accurate.
Touch "Calibration" application, and input 123456 then you can start
calibration.
90
Android IP Video Phone D800 User Manual
Input 123456 to start calibration.
The Calibration will be take effect after reboot.
Calendar
You can view the current "year, month, day" and "day of week" through the
calendar, so it is convenient for you to arrange your daily routine.
And you can also create one or more new events to remind you doing sth.
PingBox
Check to see whether the network is connected successfully, so you can know
the status of network connection better and faster. You can also capture the
packet to analyze more information.
91
Android IP Video Phone D800 User Manual
Ping interface
Configuration
item
Ping
Meaning
Through the PingBox can check whether Internet
unobstructed and connection are successful, etc, so as to
know better and faster the network connection state. You can
input IP address or domain name to test.
Capture interface
Start: Tap Start button, then will pop-up a list with
Configuration parameters tips.
Capture
Protocol Type: Support UDP，TCP，SIP，HTTP and All of
the eth0. You Can select one protocol or multiple protocols.
Save Path: The default path is SD Card.
92
Android IP Video Phone D800 User Manual
Log
Log interface
Export System Log:Select export path is SD Card or U
disk.
Export Event Log:Select export path is SD Card or U disk.
Screen Off
The shortcut of closing the screen.
Reboot
The shortcut to reboot the phone quickly.
93
Android IP Video Phone D800 User Manual
Android system setting
Basic settings
Tap "Settings" to enter settings interface to configure.
WAN
Tap "Settings", the default selection is" Basic settings", select "WAN" to switch
to "WAN" interface.
Configuration item Meaning
Display telephone’s IP, gateway, Netmask, the primary
Status
DNS and the backup DNS that are using currently.
94
Android IP Video Phone D800 User Manual
Ethernet
configuration
PPPoE set
Network: After enabling, the phone will try to
connect network.
Ethernet configuration: Tap the Ethernet
configuration button, it will pop up a "Configure
Ethernet device" dialog, and then do the following
configurations, after configuring, you can tap "OK"
button to make settings take effect.
Network devices: Tap the Network devices button
then it will pop up a selection list of physical network.
The default is eth0.
DHCP: Use DHCP to connect network.
DNS server address automatically: Whether to use
DNS assigned by DHCP server to connect network.
Static IP: Whether to use static IP to connect network.
IP: Input your assigned IP address.
Netmask: Input your assigned Netmask.
Gateway: Input your assigned Gateway.
Primary
DNS:
Input
assigned
primary
DNS
Username:
Input
youryour
assigned
PPPoE
account
address.
username.
Alert
DNS:Input
Inputyour
yourassigned
assignedPPPoE
Alter DNS
address.
Password:
password.
Auto login connection: Whether to automatically
connect PPPoE on booting.
After the configuration is completed, if you click
"Connect" button, it will connect to the network using
PPPoE mode at once; If you click "OK" button, it will
only save the configuration parameters; If you click
"cancel" button, the parameters you have been set will
not be saved.
Sound & display
Tap "Basic settings", then select "sound & display" to switch to sound &
display interface.
Configuration item
Meaning
Silent mode: Set whether to enable Silent mode.
Volume Set
After enabling the function,
all sounds will not take effect expect media volume
and alarm clock.
Ringer volume: Adjust the volume size of
incoming call.
Media volume: Adjust the volume size of media.
Phone ringtone: Set telephone ringtone of
Ring Set
incoming calls.
95
Android IP Video Phone D800 User Manual
Tone Set
Screen Saver Set
Hibernate Set
Display Set
U Disk notifications
Notification ringtone: Set notification ringtone of
the telephone.
Audible touch tones: Enable/Disable. After
enabling the function, when you use a dialing
keyboard it can play sound.
Audible selection: Enable/Disable. After enabling
the function, when you select the screen it can play
sound.
Enable screen saver: Enable/Disable. After
enabling this function, the LCD screen will be the
state of the screen saver mode after the specified
time.
Screen saver timeout: Input the waiting time after
enabling the screen saver mode, the default unit is
minute.
Screen saver mode: There are three types of
screen saver ("Close LCD", "Album" and "Clock")
for you to choose.
Prohibit operation period: Set prohibit operation
period and other related parameters.
Enable hibernate: Enable/Disable. After enabling
this function, the LCD screen will be the state of
the hibernate mode after the specified time.
Hibernate timeout: Input the waiting time after
enabling the hibernate mode, the default unit is
minute.
Animation: Set the window animation mode, there
are three kinds of mode ("No animations", "Some
animations" and "All animations") for you to
choose.
Brightness: Regulate brightness of screen display.
Enable/Disable. After enabling, it will play the
corresponding notification alert tone when you
install and uninstall the U-Disk.
Appendix:
1. If you enable hibernation and screen saver at the same time, the phone
will first enter the screen saver, Then enter the state of dormancy.
2. To introduce the Screen saver prohibit operation period parameters.
Use screen saver prohibit operation period:
If enabled, screen saver will not take effect at the specified time, it will close
LCD directly.
The first period start time: Set the first period start time.
The first period end time: Set the first period end time.
The second period start time: Set the second period start time.
96
Android IP Video Phone D800 User Manual
The second period end time: Set the second period end time.
Configuration management
Tap "Settings", and then select "Configuration management" to switch to
Configuration management interface.
Configuration item Meaning
Server: Input the upgrade server address.
Auto provision
Protocol: Select the protocol used by the automatic
upgrade, Include: FTP, HTTP and TFTP.
Account: Input the upgrade server account. (Note: It
is only used when using the FTP protocol.)
Password: Input the upgrade server password. (Note:
It is only used when using the FTP protocol.)
File name: Input the filename needed to be upgraded.
Time interval: Input automatic update interval.
Mode: select the upgrade modes: "Disable", "After
reboot", "Time interval".
Manual upgrade: Manual to upgrade.
Server: Input the server address of the network
Network
phonebook.
phonebook
File name: Configure the network phonebook name
that is consistent with the file name on the server,
otherwise, download will be failed.
Refresh time: Configure the interval time to update
data of the phone from the server, the unit is hour.
Server: Input the server address of TR069, in TR069
TR-069
interface press any DTMF button can pop up an input
box of entering the server address.
Account: Input the account that used in registering
TR069 server.
Password: Input the password that used in registering
TR069 server.
Automatic login: Enable/Disable. After enabling, it
will use the saved user name and password after the
phone reboot and do not need to manually input.
Local sequence number: Display the local sequence
number of TR069.
Attach:
You must make a version file, that is version. txt, before automatic upgrade the
applications, as follows:
Version: 1.0.837.35.64
97
Android IP Video Phone D800 User Manual
Server: 192.168.1.249
Image: home.tar.gz
Protocol: ftp
User: ad
Password: ad
Version: Phone version, this version can be arbitrarily input. But the version
number cannot be same with the telephone version number, otherwise it will
not upgrade.
Server: Upgrade the server address that is using.
Image: The file that need to be updated, the suffix name must use tar.gz.
Protocol: Upgrade the protocol that is using, For example ftp, tftp, http etc.
User: According to the protocol, fill in the corresponding user name.
Password: According to the protocol, fill in the corresponding password.
1. In the automatic upgrade interface, you can configure corresponding
parameters, the file name must be input with version.txt, and the other settings,
according to the configuration on the above form, then upgrade.
2. After the upgrade is completed, telephone notification bar will have the
upgrade prompt notification; Clicking it will pop up a dialog box to ask
whether to upgrade the new version, you can click "OK", then update.
Language & keyboard
Tap "Basic settings", then select "language & keyboard" to switch to language
& keyboard interface.
Configuration item
Meaning
Set the phone language environment, the default
Select locale
selection is English.
Set the Android keyboard, Google Input Method,
Text settings
Penpower Input Method etc that the phone uses.
Be careful:
Users through the Android market to install third party input method will
be automatically added to the language and keyboard settings.
Date & time
Tap the "Basic Settings", and then choose "Date & time" switch to the date and
time settings interface.
Configuration item
Meaning
When enabled, the phone will automatically get the
Auto
98
Android IP Video Phone D800 User Manual
Automatic timing
current time through the sntp server.
Configuring the phone to get the sntp server
address at the current time.
server Settings
Set the date
Set the current date.
Select time zone
Select the current time zone.
Set the time
Set the current time manually.
Use the 24-hour
When enabled, the time will be displayed in a
24-hour format.
format
Select the date format
Select the current date format. There are three
types for you to choose ("Year - Month - Day",
"Day - Month - Year" or "Month - Day - Year").
Note:
1. You need to configure the available time server address and select the
corresponding time zone after enabling "Auto", at the same time you must
ensure that the phone is in network status, or it cannot get the correct time.
2. After enabling "Auto", you cannot set the time and date manually.
VoIP
Tap "Settings" and select "VoIP Settings" to switch to VoIP setup interface.
99
Android IP Video Phone D800 User Manual
Configuration item
SIP set
Line set
Voice
Video
QoS
Port
Meaning
Configure the corresponding registration parameter
of each sip account, such as sip server address and
so on, then click "OK" button after configuration is
completed.
Configure the corresponding sip line of each line
key on the phone keyboard.
Configure voice parameters in the process of calls,
such as voice coding, whether to enable VAD, etc.
Configure video parameters in the process of video
calls, such as encoding resolution, frame rate, etc.
DiffServ enable: Configure whether to enable
differentiated services.
DiffServ value: Configure differentiated services
parameter value, if you set normal level, the value
is 0x00.
Media initial port(10000-60000):
Configure the media initial port, this port assigned
as dynamic allocation.
(Size 10000--60000)
Media port quantial(100-400):
Configure the maximum number of RTP port
allocated, default value is 200.
Attachment:
SIP registration parameters introductions:
Configuration item
Meaning
Set your SIP server address.
Server
It supports the address in the form of domain
name.
Set your SIP account.
Account
Set your SIP password.
Password
Input the phone number assigned by your VoIP
Phone Number
service provider. Phone will not register if there is
no phone number configured.
Enable/Disable register.
SIP register
Disable register,
Display name
Server Name
Enable register.
Configure the display name, it allows the English
alphabet input (does not support Chinese).
Configure the SIP register server name.
100
Android IP Video Phone D800 User Manual
Domain realm
Server port
Register expire time
(seconds)
DTMF mode
RFC protocol edition
RFC privacy edition
Transport protocol
Ban anonymous call
Enable strict proxy
Enable subscribe
Enable via rport
Enable prack
Configure the SIP domain name (the user can
choose not to configure, the system will
automatically configure).
Configure the SIP register server port.
Configure the server register timeout(s), default 60
seconds. If the registration time of the server
required is greater or less than the time of the
phone to configure, telephone can automatically
modify to the time limit that server recommended,
and register again.
Set DTMF mode, there are four types:
 DTMF_RELAY
 DTMF_RFC2833
 DTMF_SIP_INFO
 DTMF_AUTO
Different server vendors can provide different
models.
Configure the protocol version of the phone. When
your phone needs to communicate with gateway
which uses SIP1.0, such as CISCO5300, you need
to configure to RFC2543 to
conduct normal communication. RFC3261 is used
by default.
Configure whether to use anonymous security call.
It supports RFC3323 and RFC3325.
Configure the transport protocol, TCP or UDP.
Configure whether to ban anonymous call.
Compatible with special server. (Using source
address of opposite side when return message, no
longer use the address in via field).
After successful registration, you can subscribe to
information, such as someone else's status or voice
mail and so on.
Configure whether to support RFC3581, rport
mechanism is used in internal network, and
requires a SIP server to support, it is used for
keeping the NAT connect of the internal network
and the external network.
Configure whether to support SIP-PRACK
function (used by "Color Ring Back Tone")
Recommend：Use the default configuration.
Enable uri convert
Enable DNS SRV
When you send URI it will convert # to %23.
Configure whether to support RFC2782 protocol
101
Android IP Video Phone D800 User Manual
Enable display name
quote
Enable CLIR
Use stun
Stun Server
Stun port
Backup server
Backup server port
edition.
Set to make quotation mark to display name as the
phone sends out signal, in order to be compatible
with server.
Enable/Disable CLIR
Enable/Disable SIP STUN;
Configure the SIP STUN server address.
Configure the SIP STUN server port.
Configure a backup server address. When the
primary server is not connected, you can use the
backup server for calling communications (The
backup server can be connected only when the
primary server cannot connect); When the primary
server is connected, the phone will automatically
switch back to the primary server to communicate.
Configure the backup server port.
Voice coding settings parameters:
Configuration item
Meaning
Set the first priority in the use of voice coding.
First codec
Set the second priority in the use of voice coding.
Second codec
Set the third priority in the use of voice coding.
Third codec
Set the fourth priority in the use of voice coding.
Fourth codec
Set the fifth priority in the use of voice coding.
Fifth codec
Set the sixth priority in the use of voice coding.
Sixth codec
Set the seventh priority in the use of voice coding.
Seventh codec
Set the eighth priority in the use of voice coding.
Eighth codec
Set G729 codec payload length.
G729 payload length
Set DTMF payload type, values between 96 and
DTMF payload type
127.
Set ILBC payload type, values between 96 and
ILBC payload type
127.
Set ILBC payload length.
ILBC payload length
Set the rate of G723, you can choose 5.3kb / s or
G723 bit rate
6.3kb / s.
Silence detection; If you enabling VAD function,
VAD
then the G.729 payload length cannot be set greater
than 20ms.
Video encoding settings parameters:
Configuration item
Meaning
Set accept video mode during a video call.
Accept video mode
Three ways for choice:
102
Android IP Video Phone D800 User Manual
First video codec
Second video codec
Third video codec
Video packet size
H.264 payload type
Mpeg4 payload type
Video resolution
Media Bandwidth
"Manual accept video", "Auto accept video" and
"Auto reject video".
Set the first priority in the use of video coding.
Set the second priority in the use of video coding.
Set the third priority in the use of video coding.
Set the size of a single video packet during the
video call
Set payload type of H.264, value between 96 and
127.
Set payload type of Mpeg4, value between 96 and
127.
Set video encoding resolution during a video call,
There are three ways for choice: QCIF, CIF and
4CIF.
Set the media bandwidth of receiving video during
a video call.
Call settings
Tap "Settings" and select "Call settings" switch to the Call interface.
Configuration item
Default calling mode
Default answering
mode
Blacklist
Meaning
Set the default call mode of the phone, Audio or
Video.
Set the default answer mode of the phone, Audio or
Video.
Whether to enable the firewall. After enabling the
function, there will be a notification note in the
status bar. When a number is added to the firewall,
103
Android IP Video Phone D800 User Manual
Do not disturb
Call waiting
Voicemail
No answer time
Digital map
Hotline number
the telephone will automatically reject all incoming
calls of this number, at the same time there won't
be any note.
Click to view all the firewall numbers successfully
added, at the same time, you can click a firewall
number to delete in check process; you can also
add and delete by the menu option.
Enabled the "DND", the phone will not allow
incoming phone calls, but the notification about
missed calls will be displayed at the status bar.
Set whether to enable the call waiting function.
Set the parameters of the voicemail:
Check for voicemail: Check which line enabled
the voicemail, you can also enable it from here.
Number to dial for checking voicemail: Set the
phone number to listen the voicemail for each line.
Number for sending calls to voicemail: Set the
phone number of the voicemail for each line.
Set no answer time. The default unit is second.
Use E164: Enable/Disable E164. After it is
enabled, it will directly dial numbers according
with E164 rules.
Use # as dial key: Enable/Disable. After enabling
the function, input the number end with "#" in the
non-pre-dial mode, it will directly dial the phone
number.
Use fixed length: Enable/Disable. After enabling
the function, inputting the number of specified
length in the non-pre-dial mode will make the call
directly.
Dial with fixed-length : Enter the number of fixed
length(1-30)
Use time out: Enable/Disable.
Dial timeout (3-99): After enabling the function,
input the number in the non-pre-dial mode, it will
dial the phone number in the specified time.
Dial plan prefix: Enable/Disable. After enabled
the function, it will be automatically added the
outside line prefix number before the outgoing
number when you are going to call.
Outside line prefix: Input the prefix number
Hotline number: Set the hotline number for each
SIP line.
Hotline timeout (0-99): Set the waiting time of the
104
Android IP Video Phone D800 User Manual
Reveal incoming
telephone place
hotline number after hooking off, if the number is
not set, the default time is 0, and then it will
immediately call the hotline number.
After enabling the call attribution show, and when
a call comes in, the incoming interface can display
the attribution information of the caller’s number.
Note:
1. Enable "DND", "Auto answer" and "call forward" at the same time, the
transfer effect priority is "DND" > > "Auto answer">> "call forward".
2. Digital Map : "Use E164","End with #","Use fixed length", "Use time out"
are in effect under the condition of non pre-dial.
Advanced settings
Location & security
Tap "Advanced Settings" and then select "location and security" switch to the
location and security settings interface.
Configuration item
Meaning
Set the password to enter the configuration items.
Set menu password
Show password as you type.
Visible password
Allow applications to access secure certificates and
Use secure
other credentials.
credentials
Install encrypted certificates from SD card.
Install from SD card
Set or change the credential storage password
Set password
Clear credential storage of all contents and reset its
Clear storage
password.
105
Android IP Video Phone D800 User Manual
Default configuration password: 123456.
Privacy
Tap "Advanced Settings" and then select "Privacy" switch to the privacy
settings interface.
Configuration item
Meaning
Clear all user information on the phone, and the entire
Factory data reset
configuration to the default configuration.
Click to restart the phone.
Reboot
Applications
Tap "Advanced Settings" and then select "Applications" switch to the
application settings interface.
Configuration item
Meaning
Allow install of non-Market application
Unknown sources
Manage and remove installed application
Manage
applications
View and control current running services
Running services
Set options for application development
Development
USB debugging: Debug mode when USB is
connected.
Allow mock locations: Allow mock locations.
Accounts & sync
Tap "Advanced Settings" and then select "Account & sync" switch to account
and sync settings interface.
Configuration item
Meaning
Application can sync, send and receive data at any
Background data
time.
Application sync data automatically.
Auto-sync
You can configure an Exchange account.
Add account
SD card and memory
Tap "Advanced Settings" and then select "SD card and memory" switch to the
106
Android IP Video Phone D800 User Manual
SD card and memory settings interface.
Configuration item
Meaning
Display the size of the total storage capacity of the
Total space
SD card.
Show the remaining available storage space size of
Available space
SD card.
Must uninstall SD card at first, then you can
Unmount SD card
remove it safely.
Format (erase) the SD card.
Format SD card
Show the total memory size of the phone.
Internal phone
storage
Show the available phone memory space.
Available space
Search
Tap "Advanced Settings" and then select search" switch to search settings
interface.
Tap "search" to switch to search settings interface.
Configuration item
Meaning
Show page proposal: When enabled, it displays the
Google search
advice that Google propose when inputting.
settings
You can choose to search content on the phone,
Searchable items
including: browser, contacts, applications and
music.
Clear shortcuts of the search results chosen
Clear search
currently.
shortcuts
About phone
Tap "Settings" and then select "About phone" switch to About Settings
interface.
107
Android IP Video Phone D800 User Manual
Configuration item
Status
Meaning
Display phone status information.
My phone number: Display phone number on each
line.
Mobile network type: Whether successfully or
unsuccessfully the phone connect to the network.
Legal information
System tutorial
Model number
Firmware version
Kernel version
Build number
MAC address: Show the physical address of the
phone.
Up time: Shows the running time of the phone to
boot.
Show open-source licensing information.
Display open-source licensing information
Display phone model.
Shows the android version number.
Display system of Linux kernel version.
Display phone version information.
108
Android IP Video Phone D800 User Manual
Web page configuration description
When both of the SE780 phone and your PC are successfully connected to the
network, enter the IP address and the web browser port about your phone as
the URL such as "http://xxx.xxx.xxx.xxx(such as: http://192.168.1.32), then
you can see the login page shows as the following picture. Enter the user
name and password and click "Logon" button to the detailed interface.
Login page
The web logo is in the left of the web. The figure:
LOGO
Basic
 Status
109
Android IP Video Phone D800 User Manual
STATUS interface
Status
Field name
Network
Phone Number
Explanation
Shows the MAC address and IP address
of the telephone.
Shows the phone numbers provided by
the SIP LINE 1-4 servers.
The last line shows the version number
and issued date.
110
Android IP Video Phone D800 User Manual
Network
QOS&VLAN interface
Field name
QOS&VLAN
Explanation
Link Layer Discovery Protocol (LLDP )Settings
Open the phone's function to send LLDP messages.
Enable LLDP
Open the phone's function to learn LLDP. After
enabling LLDP Learn, telephone can automatically
Enable
Learning learn the number of DSCP, 802.1p, VLAN ID of the
network. If the number is different from the number
Function
of network, telephone will change its own value to
the value of the network.
The time interval to send LLDP messages of the
Package
phone, the unit is seconds. Default is 60 seconds.
Interval(1--3600)
Quality of Service (QoS) Settings
Enable/Disable DSCP
Enable DSCP
Set the number of Audio RTP DSCP.(Valid value is
Audio RTP DSCP
0--63)
Set the number of Video RTP DSCP.(Valid value is
Video RTP DSCP
0--63)
Set the number of Signal DSCP.(Valid value is 0--63)
SIP DSCP
111
Android IP Video Phone D800 User Manual
WAN Port VLAN Settings
Enable WAN Port
Enable/Disable VLAN.
VLAN
Set the number of VLAN ID. Range is 0~4095.
WAN Port VLAN ID
Set the priority number of SIP 802.1p. Valid value is
SIP 802.1P Priority
0~7.
Set the priority number of Audio 802.1p. Valid value
Audio 802.1P Priority
is 0~7.
Set the priority number of Signal 802.1p. Valid value
Video 802.1P Priority
is 0~7.
Select LAN Port VLAN Mode.
 Disable: Disable Port VLAN.
LAN
Port
VLAN  Follow WAN: Follow the ID number of WAN.
 Enable: Enable Port VLAN and set the Port
Mode
VLAN ID different from WAN.
LAN Port VLAN ID
Set the number of Port VLAN ID different from
WAN. Range is 0~4095.
SERVER PORT interface
112
Android IP Video Phone D800 User Manual
SERVER
Field name
Explanation
Notice: Please reboot the system if you modify the HTTP port number
(The new number should be greater than 1024)!
Use the type of web server, you can choose
HTTP or HTTPS. After selecting one server,
you can use the selected server to login the
Web Server Type
telephone’s web page.
Such as :
https://192.168.1.25 or http://192.168.1.25 .
Set HTTP web browser port, the default is 80
port, if you want to enhance system safety,
you'd better change it into non-80 standard
port;
HTTP Port
Example: The IP address is 192.168.1.70. and
the port value is 8090, the accessing address is
http://192.168.1.70:8090
HTTPS Port
RTP Port Range Start
RTP Port Quantity
Set HTTPS web browser port.
Set the RTP Initial Port.
It is dynamic allocation.
Set the maximum quantity of RTP Port,
the default is 200.
VOIP
 SIP
113
Android IP Video Phone D800 User Manual
SIP Basic Settings interface
Advanced SIP Setting interface
114
Android IP Video Phone D800 User Manual
Sip Configuration
Field name
Explanation
Choose line to set info about SIP, there are 4 lines to choose.
Basic Settings
Shows whether the phone has been registered the SIP
Status
server, if not, show Unapplied.
Server Address Input your SIP server address.
Set your SIP server port.
Server Port
Authentication
Input your SIP register account name.
User
Authentication
Input your SIP register password.
Password
Input the phone number assigned by your VoIP service
provider. Phone will not register if there is no phone
SIP User
number configured.
Set the display name.
Display Name
Enable
Enable/Disable resistration.
Registration
Set the sip domain if needed, otherwise this VoIP
phone will use the Register server address as sip
Domain Realm
domain automatically. (Usually it is same with
registered server and proxy server IP address).
Set proxy server IP address. (Usually, Register SIP
Server configuration is the same as Proxy SIP Server.
Proxy Server
But if your VoIP service provider give different
Address
configurations between Register SIP Server and Proxy
SIP Server, you need make different settings)
Proxy Server
Set your Proxy SIP server port.
Port
Input your Proxy SIP server account.
Proxy User
Proxy
Input your Proxy SIP server password.
Password
Phone backup server address, if the primary server is
Backup Server
not successfully registered then enabled the backup
Address
server.
Backup Server
Configure the backup server port.
port
Set the server name. It is displayed on the dialer
Server Name
interface.
Advanced SIP Settings
Enable/Disable Signal encryption.
SIP
115
Android IP Video Phone D800 User Manual
Encryption
SIP
Encryption
Key
RTP
Encryption
RTP
Encryption
Key
Enable
BLF
List
BLF
List
Number
Keep Alive
Type
Keep Alive
Interval
User Agent
DTMF Type
Local Port
Anonymous
Call Edition
Enable report
Enable
PRACK
Enable Long
Contact
Convert URI
Dial Without
Registered
Ban
Anonymous
Call
Set the key for signal encryption.
Enable/Disable RTP encryption.
Set the key for RTP encryption.
Enable/Disable BLF List.
Input the BLF List number.
Select the keep alive type, if the type is SIP option,
the phone will send option sip message to server every
NAT Keep Alive Period(s), then the server responses
with 200 to keep alive. If the type is UDP, the phone
will send UDP message to server to keep alive every
NAT Keep Alive Period(s).
Set examining interval of the server, default is 60
seconds
Set the user agent if you have, the default is VoIP Phone
1.0.
Select DTMF sending mode, there are three modes:
* DTMF_RELAY
* DTMF_RFC2833
* DTMF_SIP_INFO.
Different service providers may provide different mode.
Set sip port of each line.
Set Anonymous call out safely; Support RFC3323 and
RFC3325.
Enable or disable system to support RFC3581. Via
report is a special way to realize SIP NAT.
Enable/Disable SIP PRACK function (basically is used
at). Suggest using the default configuration.
Set more parameters in contact field, connect with SEM
server.
Convert # to %23 when send the URI.
Enable/Disable Dial without Register. If enabled, you
can call directly the gateway.
Set to ban anonymous Call.
116
Android IP Video Phone D800 User Manual
Enable DNS
SRV
Enable
Session Timer
Session
Timeout
Conference
Type
Conference
Number
Subscribe for
MWI
MWI Number
Subscribe
Period
Registration
Expires
Server Type
RFC Protocol
Edition
Transport
Protocol
Keep
Authentication
Click to talk
Ans. With a
Single Codec
Auto TCP
Enable Strict
Proxy
Support DNS looking up with _sip. udp mode
Enable/Disable Session Timer to support RFC4028 or
not. It will refresh the SIP sessions.
Set the time out of the session.
Select "Local" or "Remote".
Input the number of the conference.
Enable/Disable the subscribe for MWI.
Input MWI number.
Overtime of resending subscribe packet. Suggest using
the default configuration.
Set expire time of SIP server register, default is 60
seconds. If the register time of the server requested is
longer or shorter than the expire time, the phone will
change automatically the time into the time
recommended by the server, and register again.
Select the special type of server which is encrypted, or
has some unique requirements or call flows.
Select SIP protocol version to adapt for the SIP server
which uses the same version as you select. For example,
if the server is CISCO5300, you need to change to
RFC2543, else phone may not cancel call normally.
System uses RFC3261 as default.
Set transport protocols, TCP or UDP.
Enable or Disable. Keep Authentication. If it is enabled,
system will take the last authentication field which is
passed the authentication by server to the request
packet. It will decrease the server’s repeated
authorization work
Set click to Talk (need practical software support).
Enable/Disable the function. When call is incoming,
phone replies SIP message with just one codec which
phone supports.
Set to use automatically TCP protocol to guarantee
usability of transport when message is above 1300 byte.
Support the special SIP server-when phone receives the
packets sent from server, phone will use the source IP
address, not the address in via field.
117
Android IP Video Phone D800 User Manual
Enable GRUU
Enable
Display name
Quote
Enable
user=phone
Set to support GRUU.
Set to make quotation mark to display name as the
phone sends out signal, in order to be compatible with
server.
Enable user=phone by selecting it, it is contained in the
invite sip message, in order to be compatible with
server.
 Stun Configuration
By STUN server, the phone in private network could know the type of NAT
and the NAT mapping IP and port of SIP. The phone might register itself to
SIP server with global IP and port to realize the device both calling and being
called in private network.
STUN interface
118
Android IP Video Phone D800 User Manual
STUN
Field name
Explanation
Simple Traversal of UDP through NATs (STUN) Settings
Shows STUN NAT Transverse estimation, true
STUN NAT
means STUN can penetrate NAT, while False
Transversal
means not.
STUN Server
Set your SIP STUN Server IP address.
Address
Set your SIP STUN Server IP port.
Server Port
Set STUN Binding Period . If NAT server finds
that a NAT mapping is idle after time out, it will
release the mapping and the system need send a
Binding Period
STUN packet to keep the mapping effective and
alive.
When use stun, call waiting for the response of the
SIP Waitting Time
stun overtime time.
Enable / disable SIP STUN.
Use Stun
Note: SIP STUN is used to realize SIP penetration to NAT. If your phone
configures STUN Server IP and Port (default is 3478), and enable SIP Stun,
you can use the ordinary SIP Server to realize penetration to NAT.
PHONE
 MEDIA
119
Android IP Video Phone D800 User Manual
MEDIA interface
MEDIA Configuration
Field name
Audio Settings
First Codec
Second Codec
Third Codec
Fourth Codec
Fifth Codec
Sixth Codec
Seventh Codec
Explanation
The fist preferential DSP codec:
G.711A/u,G.722,G.723,G.729,iLBC,ARM,ARMWB
The second preferential DSP codec:
G.711A/u,G.722,G.723,G.729,iLBC,ARM,ARMWB
The third preferential DSP codec:
G.711A/u,G.722,G.723,G.729,iLBC,ARM,ARMWB
The fourth preferential DSP codec:
G.711A/u,G.722,G.723,G.729,iLBC,ARM,ARMWB
The fifth preferential DSP codec:
G.711A/u,G.722,G.723,G.729,iLBC,ARM,ARMWB
The sixth preferential DSP codec:
G.711A/u,G.722,G.723,G.729,iLBC,ARM,ARMWB
The seventh preferential DSP codec:
120
Android IP Video Phone D800 User Manual
Eighth Codec
Tone Standard
DTMF payload Type
ILBC Payload Type
ILBC Payload Length
ARM Payload Type
ARM-WB Payload
Type
G723.1 Bit Rate
G729AB Payload
Length
Hook Check
Enable VAD
G.711A/u,G.722,G.723,G.729,iLBC,ARM,ARMWB
The eighth preferential DSP codec:
G.711A/u,G.722,G.723,G.729,iLBC,ARM,ARMWB
Select Signal standard.
Configure a dual - tone multi-frequency’s
effective payload.
Set the ILBC load type, value based on 96-127.
Set the ILBC payload length.
Set the ARM payload type.
Set the ARM-WB payload type.
Select the G.723.1 rate, it has two rates.(5.3kb / s
or 6.3kb / s)
Configure the G729AB audio coding Payload
length.
Check the on-hook or off-hook status, if the
on-hook, but the screen status is off-hook, use
this option.
Mute detection; if you enable VAD, G.729
payload length cannot be set more than 20ms.
Video Settings
First Video Codec
Second Video Codec
Third Video Codec
Video Packet Size
H.264 Payload Type
Mpeg4 Payload Type
Video Bit Rate
Video Frame Rate
Video Resolution

The fist preferential video codec: H.263, H.264,
Mpeg4.
The second preferential video codec: H.263,
H.264, Mpeg4.
The third preferential video codec: H.263, H.264,
Mpeg4.
Video packet size.
Set the H.264 payload type, value based on
96-127.
Set the Mpeg4 payload type, value based on
96-127.
Set the Video Bit Rate.
Set the Video Frame Rate.
Set video resolution: QCIF, CIF,VGA and 4CIF.
FEATURE
121
Android IP Video Phone D800 User Manual
FEATURE interface
FEATURE
Explanation
Field name
Feature Settings
603, server reject the invite.
Reject Return Code
486, server is busy.
Busy Return Code
480, do not disturb.
DND Return Code
Input the server IP of the active URI.
Active URI Limit IP
Action URL Settings
Input the Action URL, then click the Apply button to see whether the
operation of the lcd screen is right.
MAINTENANCE
 Auto Provision
122
Android IP Video Phone D800 User Manual
t
AUTO PROVISON interface
AUTO PROVISION
Field name
Explanation
Auto Update Settings
Show the current config file’s version. If the
version of the configuration downloaded is higher
Current Config
than the version of the running configurations,
Version
the auto provision would upgrade, or stop here. If
the endpoints confirm the configuration by Digest
123
Android IP Video Phone D800 User Manual
method, the endpoints wouldn’t upgrade
configuration unless the configuration in the
server is different with the running configuration.
Show the common config file’s version. If the
configuration downloaded and the running
configurations are the same, the auto provision
Common Config would stop here. If the endpoints confirm the
configuration by Digest method, the endpoints
Version
wouldn’t upgrade configuration unless the
configuration in the server is different with the
running configuration.
CPE
Serial Shows the Serial CPE number. It depends on the
server.
Number
Specify FTP/HTTP/HTTPS server Username.
System will use anonymous if username keep
User
blank.
Specify FTP/HTTP/HTTPS server Password.
Password
Input the Encrypt Key, if the configuration file is
Config
encrypted.
Encryption Key
Common Config Input the Common Encrypt Key, if the Common
Configuration file is encrypted.
Encryption Key
Save
Auto Save the username and password authentication
message of http/https/ftp and input ID message in
Provision
the phone until the url in the server changes.
Information
DHCP Option Settings
Specify DHCP Option. DHCP option supports
DHCP custom option and DHCP option 66 and
DHCP
Option DHCP option 43 to obtain the parameters. You
Setting
could choose one method among them ， the
default is DHCP option disable.
A valid Custom DHCP Option is from 128 to
Custom
DHCP 254. The Custom DHCP Option must be in
accordance with the one defined in the DHCP
Option
server.
Plug and Play
Enable/Disable PNP.
Enable PnP
Specify the PnP Server
PnP Server
Specify the PnP Server
PnP Port
Specify the PnP Transfer protocol
PnP Transport
Specify the Interval time, unit is hour
PnP Interval
Phone Flash
Set FTP/TFTP/HTTP server IP address for auto
Server Address
124
Android IP Video Phone D800 User Manual
Config File Name
update. The address can be IP address or
Domain name with subdirectory.
Set configuration file’s name which need to
update. System will use MAC as config file
name if config file name keep blank. For
example, 000102030405.。
Protocol Type
Specify the Protocol type FTP、TFTP or HTTP.
Update Interval
Specify update interval time, unit is hour.
Different update modes:
1. Disable: means no update
2. Update after reboot: means update after
reboot.
3. Update at time interval: means periodic
update.
Update Mode
TR069 Settings
Enable TR069
ACS Server Type
ACS Server URL
ACS User
ACS Password
TR069 Auto Login
"Inform" Sending
Period
Enable TR069 by selecting it.
Specify the ACS Server Type.
Specify the ACS Server URL.
Specify ACS User.
Specify ACS Password.
Enable TR069 Auto Login by selecting it.
Specify the “inform” Sending Period, unit is
second.
 SYSLOG
125
Android IP Video Phone D800 User Manual
SYSLOG interface
Syslog Configuration
Field name
Syslog Settings
Server IP
Server Port
MGR Log Level
SIP Log Level
Enable Syslog
Web Capture
Start
Stop
Explanation
Set Syslog server IP address.
Set Syslog server port.
Set the level of MGR log.
Set the level of SIP log.
Select it or not to enable or disable syslog.
Click the start button when you need capture the WAN
packet stream of the phone, then open or save the file
as the interface.
Click the end button to stop capturing the packet
stream.
Note:
Syslog is a protocol which is used to record the log messages with
client/server mechanism. Syslog server receives the messages from clients, and
classifies them based on priority and type. Then these messages will be written
into log by some rules which administrator can configure. This is a better way
for log management.
8 levels in debug information:
Level 0---emergency: This is highest default debug info level. You system
cannot work.
Level 1---alert: Your system has deadly problem.
Level 2---critical: Your system has serious problem.
126
Android IP Video Phone D800 User Manual
Level 3---error: The error will affect your system working.
Level 4---warning: There are some potential dangers. But your system can
work.
Level 5---notice: Your system works well in special condition, but you need to
check its working environment and parameter.
Level 6---info: the daily debugging info.
Level 7---debug: the lowest debug info Professional debugging info from R&D
person.
At present, the lowest level of debug information is info; debug level only can
be displayed on telnet.
CONFIG interface
CONFIG
Field name
Save
Configuration
Backup
Configuration
Clear
Configuration
Explanation
You can save all changes of configurations. Click the
Save button, all changes of configuration will be
saved, and be effective immediately.
Right clicks on “Right click here…” and select “Save
Target As….” then you will save the config file in .txt
or .xml format.
User can restore factory default configuration and
reboot the phone.
If you login as Admin, the phone will reset all
configurations and restore factory default; if you login
as Guest, the phone will reset all configurations except
for VoIP accounts (SIP1-4) and version number.
127
Android IP Video Phone D800 User Manual
UPDATE interface
Update
Field name
Web Update
Explanation
Click the browse button, find out the config file saved
before or provided by manufacturer, download it to the
phone directly, press “Update” to save. You can also
update downloaded update file, firmware by web.
TFTP/FTP Update
Set the FTP/TFTP server address for
Server
download/upload. The address can be IP address or
Domain name with subdirectory.
Set the FTP server Username for download/upload.
Username
Set the FTP server password for download/upload.
Password
Set the name of update file or config file. The default
File name
name is the MAC of the phone, such as
000102030405.
Notice: You can modify the exported config file. And you can also download
config file which includes several modules that need to be imported. For
example, you can download a config file just keep with SIP module. After
reboot, other modules of system still use previous setting and are not lost.
Action type that system want to execute：
Type
Protocol
1. Application update: download system update file
2. Config file export: Upload the config file to
FTP/TFTP server, name and save it.
3. Config fie import: Download the config file to
phone from FTP/TFTP server. The configuration will
be effective after the phone is reset.
Select FTP/TFTP server
128
Android IP Video Phone D800 User Manual
 ACCESS
You can add or delete user account, and change the authority of each user
account in this web page.
ACCESS interface
Field name
User Settings
ACCESS
Explanation
This table shows the current user existed.
Adding User
Set account user name.
User Name
Set the password.
Password
Confirm the password.
Confirm
Set user level. Root user has the right to
User Level
modify configuration, General can only read.
User Management
Select the account and click the Modify to modify the selected
account, and click the Delete to delete the selected account.
General user only can add the user whose level is General.
129
Android IP Video Phone D800 User Manual
 REBOOT
REBOOT interface
REBOOT
Explanation
Field name
Reboot Phone
If you modified some configurations which need the phone’s reboot to
be effective, you need click the Reboot, then the phone will reboot
immediately.
Notice: Before reboot, you need confirm that you have saved all
configurations.
SECURITY
 WEB FILTER
130
Android IP Video Phone D800 User Manual
WEB FILTER interface
WEB FILTER
Field name
Explanation
WEB Filter Table
User could make some device own IP, which is pre-specified, access to
the MMI of the phone to config and manage the phone.
Note: After configuration, you need to reboot the system to make it
take effect.
WEB Filter Table Settings
Add or delete the IP address segments that access to the phone.
Set initial IP address in the Start IP column, Set end IP address in the
End IP column, and click Add to add this IP segment. You can also click
Delete to delete the selected IP segment.
WEB Filter Setting
Select it or not to enable or disable Web Filter.
Enable Web Filter
Click Apply to make it effective.
SECURITY interface
SECURITY
Explanation
Field name
Update Security File
Browse the security file you want to update, then click "Update" to
update.
131
Android IP Video Phone D800 User Manual
LOGOUT
 Logout
Logout interface
Field name
Logout
Logout
Explanation
Click "logout" and you will exit web page. If
you want to enter it next time, you need input
user name and password again.
132