P6X58D Premium Motherboard Manual
Motherboard
P6X58D
Premium
E4779
First Edition (V1)
November 2009
Copyright © 2009 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any
means, except documentation kept by the purchaser for backup purposes, without the express written
permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless
such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the
product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS
DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,
LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),
EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY
DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO
RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS
MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identification or explanation and to the
owners’ benefit, without intent to infringe.
ii
Contents
Contents....................................................................................................................... iii
Notices....................................................................................................................... vii
Safety information..................................................................................................... viii
About this guide.......................................................................................................... ix
P6X58D Premium specifications summary.............................................................. xi
Chapter 1:
1.1
1.2
1.3
Package contents....................................................................................... 1-1
Special features.......................................................................................... 1-2
1.3.1
Product highlights........................................................................ 1-2
1.3.3
ASUS exclusive overclocking features........................................ 1-5
1.3.2
Chapter 2:
2.1
2.2
2.2.1
Motherboard layout...................................................................... 2-2
2.2.3
Placement direction..................................................................... 2-4
2.2.4
Installing the CPU........................................................................ 2-5
2.3.3
Uninstalling the CPU heatsink and fan........................................ 2-9
Installing the CPU heatsink and fan............................................. 2-8
System memory........................................................................................ 2-10
2.4.1
Overview.................................................................................... 2-10
2.4.3
Installing a DIMM....................................................................... 2-17
2.4.4
Memory configurations............................................................... 2-11
Removing a DIMM..................................................................... 2-17
Expansion slots........................................................................................ 2-18
2.5.1
Installing an expansion card...................................................... 2-18
2.5.3
Interrupt assignments................................................................ 2-19
2.5.4
2.5.5
2.7
Screw holes................................................................................. 2-4
2.3.1
2.5.2
2.6
Layout contents............................................................................ 2-3
Central Processing Unit (CPU).................................................................. 2-5
2.4.2
2.5
Hardware information
Motherboard overview................................................................................ 2-2
2.3.2
2.4
ASUS unique features................................................................. 1-3
Before you proceed.................................................................................... 2-1
2.2.2
2.3
Product introduction
Welcome!..................................................................................................... 1-1
2.5.6
Configuring an expansion card.................................................. 2-18
PCI slots..................................................................................... 2-20
PCI Express x1 slot.................................................................... 2-20
PCI Express 2.0 x16 slots.......................................................... 2-20
Jumpers..................................................................................................... 2-22
Onboard switches..................................................................................... 2-23
iii
Contents
2.8
Connectors................................................................................................ 2-25
2.8.1
Rear panel connectors............................................................... 2-25
2.8.3
Internal connectors.................................................................... 2-29
2.8.2
2.9
2.10
2.8.4
3.2
Turning off the computer.......................................................................... 2-38
Updating BIOS............................................................................................. 3-1
3.2.1
ASUS Update utility..................................................................... 3-2
3.2.3
ASUS CrashFree BIOS 3 utility................................................... 3-5
3.3.1
BIOS menu screen....................................................................... 3-6
3.3.3
Navigation keys............................................................................ 3-7
3.3.4
3.3.5
3.3.6
3.3.7
3.3.8
3.3.9
Menu items.................................................................................. 3-7
Submenu items............................................................................ 3-7
Configuration fields...................................................................... 3-7
Pop-up window............................................................................ 3-7
Scroll bar...................................................................................... 3-7
General help................................................................................ 3-7
3.4.1
SATA 1–6..................................................................................... 3-8
3.4.3
AHCI Configuration.................................................................... 3-11
3.4.4
Storage Configuration................................................................ 3-10
System Information.................................................................... 3-11
Ai Tweaker menu....................................................................................... 3-12
3.5.1
Ai Overclock Tuner..................................................................... 3-12
3.5.3
Intel(R) SpeedStep(TM) Tech.................................................... 3-13
3.5.2
3.5.4
3.5.5
3.5.6
3.5.8
3.5.9
3.5.10
3.5.11
iv
Menu bar...................................................................................... 3-6
Main menu................................................................................................... 3-8
3.4.2
3.5
ASUS EZ Flash 2 utility................................................................ 3-4
BIOS setup program................................................................................... 3-6
3.3.2
3.4
BIOS setup
Knowing BIOS............................................................................................. 3-1
3.2.2
3.3
ASUS Q-Connector (system panel)........................................... 2-37
Starting up for the first time..................................................................... 2-38
Chapter 3:
3.1
Audio I/O connections................................................................ 2-26
CPU Ratio Setting...................................................................... 3-13
Intel(R) TurboMode Tech............................................................ 3-13
Xtreme Phase Full Power Mode................................................ 3-13
BCLK Frequency........................................................................ 3-13
DRAM Frequency...................................................................... 3-14
UCLK Frequency....................................................................... 3-14
QPI Link Data Rate.................................................................... 3-14
DRAM Timing Control................................................................ 3-14
Contents
3.5.7
CPU Voltage Control.................................................................. 3-16
3.5.14
CPU PLL Voltage....................................................................... 3-16
3.5.13
3.5.15
3.5.16
3.5.17
3.5.18
3.5.19
3.5.20
3.5.21
3.5.22
3.5.23
3.5.24
3.5.25
3.5.26
3.5.27
3.6
3.5.28
IOH Voltage................................................................................ 3-17
IOH PCIE Voltage...................................................................... 3-17
ICH Voltage................................................................................ 3-17
ICH PCIE Voltage...................................................................... 3-17
DRAM Bus Voltage.................................................................... 3-17
DRAM DATA REF Voltage on CHA/B/C..................................... 3-18
DRAM CTRL REF Voltage on CHA/B/C.................................... 3-18
Load-Line Calibration................................................................. 3-18
CPU Differential Amplitude......................................................... 3-18
CPU Clock Skew........................................................................ 3-18
CPU Spread Spectrum.............................................................. 3-18
IOH Clock Skew......................................................................... 3-18
PCIE Spread Spectrum.............................................................. 3-18
CPU Configuration..................................................................... 3-19
3.6.3
Onboard Devices Configuration................................................. 3-22
3.6.5
Chipset....................................................................................... 3-22
USB Configuration..................................................................... 3-24
PCIPnP...................................................................................... 3-25
Power menu............................................................................................... 3-26
3.7.1
Suspend Mode........................................................................... 3-26
3.7.3
ACPI 2.0 Support....................................................................... 3-26
3.7.2
3.7.4
3.7.5
3.7.6
3.7.7
Repost Video on S3 Resume..................................................... 3-26
ACPI APIC Support.................................................................... 3-26
EuP Ready................................................................................. 3-26
APM Configuration..................................................................... 3-27
Hardware Monitor...................................................................... 3-28
Boot menu................................................................................................. 3-29
3.8.1
Boot Device Priority................................................................... 3-29
3.8.3
Security...................................................................................... 3-31
3.8.2
3.9
QPI/DRAM Core Voltage........................................................... 3-16
Advanced menu........................................................................................ 3-19
3.6.4
3.8
CPU Voltage ............................................................................. 3-16
3.6.1
3.6.2
3.7
PCIE Frequency......................................................................... 3-14
3.5.12
Boot Settings Configuration....................................................... 3-30
Tools menu................................................................................................ 3-33
3.9.1
ASUS EZ Flash 2....................................................................... 3-33
3.9.3
ASUS O.C. Profile...................................................................... 3-35
3.9.2
Express Gate............................................................................. 3-34
Contents
3.10
3.9.4
AI NET 2..................................................................................... 3-36
Exit menu................................................................................................... 3-37
Chapter 4:
4.1
4.2
4.3
Software support
Installing an operating system.................................................................. 4-1
Support DVD information........................................................................... 4-1
4.2.1
Running the support DVD............................................................ 4-1
4.2.2
Obtaining the software manuals.................................................. 4-2
Software information.................................................................................. 4-3
4.3.1
ASUS PC Probe II........................................................................ 4-3
4.3.3
ASUS EPU................................................................................... 4-5
4.3.2 ASUS AI Suite.............................................................................. 4-4
4.3.4
ASUS Fan Xpert.......................................................................... 4-6
4.3.5
ASUS TurboV............................................................................... 4-7
4.3.6
4.4
ASUS Express Gate SSD............................................................ 4-8
4.3.7
Audio configurations.................................................................... 4-9
RAID configurations................................................................................. 4-10
4.4.1
RAID definitions......................................................................... 4-10
4.4.3
Setting the RAID item in BIOS................................................... 4-11
4.4.2
4.5
Installing Serial ATA hard disks.................................................. 4-11
4.4.4
Intel® Matrix Storage Manager option ROM utility...................... 4-11
Creating a RAID driver disk..................................................................... 4-15
4.5.1
Creating a RAID driver disk without entering the OS................. 4-15
4.5.3
Installing the RAID driver during Windows® OS installation....... 4-16
4.5.2
Creating a RAID driver disk in Windows®.................................. 4-15
4.5.4
Using a USB floppy disk drive.................................................... 4-17
Chapter 5:
5.1
Multiple GPU technology support
ATI® CrossFireX™ technology................................................................... 5-1
5.1.1
Requirements............................................................................... 5-1
5.1.3
Installing two CrossFireX™ graphics cards................................. 5-2
5.1.2
Before you begin.......................................................................... 5-1
5.1.4
Installing three CrossFireX™ graphics cards............................... 5-3
5.1.5
5.2
Enabling the ATI® CrossFireX™ technology................................ 5-4
NVIDIA SLI™ technology.......................................................................... 5-6
®
5.2.1
Requirements............................................................................... 5-6
5.2.3
Installing three SLI-ready graphics cards..................................... 5-8
5.2.2
5.2.4
5.2.5
vi
Installing the device drivers.......................................................... 5-4
5.1.6
Installing two SLI-ready graphics cards....................................... 5-7
Installing the device drivers.......................................................... 5-9
Enabling the NVIDIA® SLI™ technology...................................... 5-9
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
•
•
This device may not cause harmful interference, and
This device must accept any interference received including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with manufacturer’s instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.
•
•
Increase the separation between the equipment and receiver.
Consult the dealer or an experienced radio/TV technician for help.
The use of shielded cables for connection of the monitor to the graphics card is required
to assure compliance with FCC regulations. Changes or modifications to this unit not
expressly approved by the party responsible for compliance could void the user’s authority
to operate this equipment.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions from
digital apparatus set out in the Radio Interference Regulations of the Canadian Department
of Communications.
This class B digital apparatus complies with Canadian ICES-003.
REACH
Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of
Chemicals) regulatory framework, we published the chemical substances in our products at
ASUS REACH website at http://green.asus.com/english/REACH.htm.
DO NOT throw the motherboard in municipal waste. This product has been designed to
enable proper reuse of parts and recycling. This symbol of the crossed out wheeled bin
indicates that the product (electrical and electronic equipment) should not be placed in
municipal waste. Check local regulations for disposal of electronic products.
DO NOT throw the mercury-containing button cell battery in municipal waste. This symbol
of the crossed out wheeled bin indicates that the battery should not be placed in municipal
waste.
vii
Safety information
Electrical safety
•
•
•
•
•
•
To prevent electrical shock hazard, disconnect the power cable from the electrical outlet
before relocating the system.
When adding or removing devices to or from the system, ensure that the power cables
for the devices are unplugged before the signal cables are connected. If possible,
disconnect all power cables from the existing system before you add a device.
Before connecting or removing signal cables from the motherboard, ensure that all
power cables are unplugged.
Seek professional assistance before using an adapter or extension cord. These devices
could interrupt the grounding circuit.
Ensure that your power supply is set to the correct voltage in your area. If you are not
sure about the voltage of the electrical outlet you are using, contact your local power
company.
If the power supply is broken, do not try to fix it by yourself. Contact a qualified service
technician or your retailer.
Operation safety
•
•
•
•
•
•
viii
Before installing the motherboard and adding devices on it, carefully read all the manuals
that came with the package.
Before using the product, ensure all cables are correctly connected and the power
cables are not damaged. If you detect any damage, contact your dealer immediately.
To avoid short circuits, keep paper clips, screws, and staples away from connectors,
slots, sockets and circuitry.
Avoid dust, humidity, and temperature extremes. Do not place the product in any area
where it may become wet.
Place the product on a stable surface.
If you encounter technical problems with the product, contact a qualified service
technician or your retailer.
About this guide
This user guide contains the information you need when installing and configuring the motherboard.
How this guide is organized
This guide contains the following parts:
•
Chapter 1: Product introduction
This chapter describes the features of the motherboard and the new technology it
supports.
•
Chapter 2: Hardware information
•
Chapter 3: BIOS setup
•
Chapter 4: Software support
•
Chapter 5: Multiple GPU technology support
This chapter lists the hardware setup procedures that you have to perform when
installing system components. It includes description of the switches, jumpers, and
connectors on the motherboard.
This chapter tells how to change system settings through the BIOS Setup menus.
Detailed descriptions of the BIOS parameters are also provided.
This chapter describes the contents of the support DVD that comes with the
motherboard package and the software.
This chapter describes how to install and configure multiple ATI® CrossFireX™ and
NVIDIA® SLI™ graphics cards.
Where to find more information
Refer to the following sources for additional information and for product and software updates.
1.
2.
ASUS websites
The ASUS website provides updated information on ASUS hardware and software
products. Refer to the ASUS contact information.
Optional documentation
Your product package may include optional documentation, such as warranty flyers,
that may have been added by your dealer. These documents are not part of the
standard package.
ix
Conventions used in this guide
To ensure that you perform certain tasks properly, take note of the following symbols used
throughout this manual.
DANGER/WARNING: Information to prevent injury to yourself when trying to
complete a task.
CAUTION: Information to prevent damage to the components when trying to
complete a task.
IMPORTANT: Instructions that you MUST follow to complete a task.
NOTE: Tips and additional information to help you complete a task.
Typography
Bold text
Indicates a menu or an item to select.
Italics
Used to emphasize a word or a phrase.
<Key>
Keys enclosed in the less-than and greater-than sign means that you must press the enclosed key.
Example: <Enter> means that you must press the Enter or Return key.
<Key1> + <Key2> + <Key3> If you must press two or more keys simultaneously, the key names are linked with a plus sign (+).
Example: <Ctrl> + <Alt> + <Del>
P6X58D Premium specifications summary
CPU
LGA1366 socket for Intel® Core™ i7 Processor Extreme Edition /
Core™ i7 Processor
Supports Intel® Turbo Boost Technology
* Refer to www.asus.com for Intel CPU support list
Chipset
Intel® X58 / ICH10R
System bus
Up to 6.4GT/s; Intel® QuickPath Interconnect
Memory
6 x DIMM, max. 24GB, DDR3 2000(O.C.) / 1866(O.C.) / 1800(O.C.) /
1600(O.C.) / 1333 / 1066 MHz, non-ECC, un-buffered memory
Triple channel memory architecture
Supports Intel® Extreme Memory Profile (XMP)
* Hyper DIMM support is subject to the physical characteristics of
individual CPUs.
** Refer to www.asus.com or this user manual for the Memory
QVL (Qualified Vendors Lists)
Expansion slots
3 x PCI Express 2.0 x16 slots (at x16/x8/x8 or x16/x16/x1 mode)
1 x PCI Express x1 slot
2 x PCI slots
Multi-GPU support
Supports NVIDIA® 3-Way SLI™ Technology
Supports ATI® Quad-GPU CrossFireX™ Technology
Storage
Intel® ICH10R Southbridge
- 6 x SATA 3.0 Gb/s ports
-Intel® Matrix Storage Technology supports SATA RAID 0, 1,
5, and 10
Marvell® 88SE9123 SATA 6.0 Gb/s controller
- 2 x SATA 6.0 Gb/s ports
LAN
Dual Gigabit LAN controllers
2 x Marvell® 88E8056 PCIe Gigabit LAN controller featuring
AI NET2
Audio
Realtek® ALC889 8-channel High Definition Audio CODEC
- DTS Surround Sensation UltraPC
- BD audio layer Content Protection
- Supports Jack-Detection, Multi-streaming, and Front Panel Jack-Retasking
- Coaxial / Optical S/PDIF out ports at back I/O
IEEE 1394
VIA® VT6308 controller supports 2 x IEEE 1394a ports (one at midboard; one at back panel)
USB
NEC® USB 3.0 controller
- 2 x USB 3.0/2.0 ports (at back panel)
Intel® ICH10R Southbridge
-8 x USB 2.0/1.1 ports
(4 ports at midboard; 4 ports at back panel)
(continued on the next page)
xi
P6X58D Premium specifications summary
ASUS unique features
ASUS Xtreme Design
ASUS Xtreme Phase:
- ASUS 16+2 Phase Power Design
ASUS Exclusive Overclocking Features
- ASUS TurboV
ASUS Exclusive Features
- MemOK!
- ASUS EPU
- Express Gate SSD
ASUS Quiet Thermal Solutions
- ASUS Fanless Design: Heat-pipe solution
- ASUS Fanless Design: Stack Cool 3+
- ASUS Fan Xpert
ASUS Crystal Sound
- ASUS Noise Filter
ASUS EZ DIY
- ASUS Q-Slot
- ASUS Q-Shield
- ASUS Q-Connector
- ASUS O.C. Profile
- ASUS CrashFree BIOS 3
- ASUS EZ Flash 2
- ASUS MyLogo 2™
- Multi-language BIOS
ASUS exclusive
overclocking features
ASUS TurboV utility
Precision Tweaker 2
- vCore: Adjustable CPU voltage at 0.00625V increment
- vCPU PLL: 36-step reference voltage control
- vDRAM Bus: 49-step DRAM voltage control
- vChipset(N.B.): 31-step chipset voltage control
- vNB-PCIe: 65-step chipset-PCIe voltage control
SFS (Stepless Frequency Selection)
- Internal Base Clock tuning from 100MHz up to 500 MHz at
1MHz increment
- PCI Express frequency tuning from 100MHz up to 180MHz
at 1MHz increment
Overclocking protection
- ASUS C.P.R. (CPU Parameter Recall)
(continued on the next page)
xii
P6X58D Premium specifications summary
Back panel I/O ports
1 x PS/2 keyboard port (purple)
1 x PS/2 mouse port (green)
1 x Clear CMOS button
1 x Coaxial S/PDIF Out port
1 x Optical S/PDIF Out port
1 x IEEE 1394a port
2 x LAN (RJ-45) ports
2 x USB 3.0/2.0 ports
4 x USB 2.0/1.1 ports
8-channel Audio I/O ports
Internal I/O connectors
2 x USB connectors support additional 4 USB 2.0/1.1 ports
2 x SATA 6.0 Gb/s connectors (gray)
6 x SATA 3.0 Gb/s connectors (blue)
1 x CPU Fan connector
3 x Chassis Fan connectors (1 x 4-pin, 2 x 3-pin)
1 x Power Fan connector
1 x IEEE1394a connector
Front panel audio connector
1 x S/PDIF Out header
CD audio in
24-pin ATX Power connector
8-pin ATX 12V Power connector
System Panel (Q-Connector)
1 x MemOK! button
1 x Power on switch
1 x Reset switch
BIOS features
16 Mb Flash ROM, AMI BIOS, PnP, DMI 2.0, WfM 2.0,
SM BIOS 2.3, ACPI 2.0a, Multi-language BIOS,
ASUS EZ Flash 2, ASUS CrashFree BIOS 3
Manageability
WfM 2.0, DMI 2.0, WOL by PME, WOR by PME, PXE
Support DVD contents
Drivers
ASUS Utilities
ASUS Update
Anti-virus software (OEM version)
Form factor
ATX form factor: 12 in. x 9.6 in. (30.5 cm x 24.4 cm)
*Specifications are subject to change without notice.
xiii
xiv
Chapter 1
Chapter 1:
Product introduction
1.1
Welcome!
Thank you for buying an ASUS® P6X58D Premium motherboard!
Chapter 1
The motherboard delivers a host of new features and latest technologies, making it another
standout in the long line of ASUS quality motherboards!
Before you start installing the motherboard, and hardware devices on it, check the items in
your package with the list below.
1.2
Package contents
Check your motherboard package for the following items.
1 x ASUS P6X58D Premium motherboard
1 x ASUS SLI™ bridge cable
1 x 2-port USB 2.0 and 1-port
eSATA module
2 x Serial ATA 6.0 Gb/s cables
4 x Serial ATA 3.0 Gb/s cables
1 x 2-in-1 ASUS Q-Connector kit
1 x ASUS Q-Shield
1 x ASUS 3-Way SLI™
bridge connector
1 x Optional Fan
for water-cooling or passive-cooling only
nual
User Ma
1 x User guide
1 x Support DVD
•
If any of the above items is damaged or missing, contact your retailer.
•
The illustrated items above are for reference only. Actual product specifications may
vary with different models.
ASUS P6X58D Premium
1-1
1.3
Special features
1.3.1
Product highlights
Chapter 1
Intel® Core™ i7 Processor Extreme Edition / Core™ i7 Processor support
This motherboard supports the latest Intel® Core™ i7 processors in LGA1366 package with
integrated memory controller to support 3-channel (6 DIMMs) DDR3 memory. Supports Intel®
QuickPath Interconnect (QPI) with a system bus of up to 6.4 GT/s and a max bandwidth of
up to 25.6 GB/s. Intel® Core™ i7 processor is one of the most powerful and energy efficient
CPUs in the world. Refer to page 2-5 for details.
Intel® X58 Chipset
The Intel® X58 Express Chipset is one of the most powerful chipset designed to support
the Intel® Core™ i7 Processors with LGA1366 package and Intel® next generation system
interconnect interface, Intel® QuickPath Interconnect (QPI), providing improved performance
by utilizing serial point-to-point links, allowing increased bandwidth and stability. It also
supports up to 36 PCI Express 2.0 lanes providing better graphics performance.
Triple-Channel DDR3 2000(O.C) / 1866(O.C.) / 1800(O.C.) / 1600(O.C.) / 1333 /
1066 support
The motherboard supports DDR3 memory that features data transfer rates of
2000(O.C.) / 1866(O.C.) / 1800(O.C.) / 1600(O.C.) /1333 / 1066 MHz to meet the higher
bandwidth requirements of the latest 3D graphics, multimedia, and Internet applications. The
triple-channel DDR3 architecture enlarges the bandwidth of your system memory to boost
system performance. Refer to page 2-10 for details.
3-Way SLI™ and Quad-GPU CrossFireX™ support
The P6X58D Premium breaks the boundaries to bring you the multi-GPU choice of either SLI™
or CrossFireX™. The motherboard features a dedicated graphics engine on the most powerful
Intel® X58 platform to optimize PCIe allocation in multiple GPU configurations. Expect a
brand-new gaming style you’ve never experienced before! Refer to chapter 5 for details.
True USB 3.0 Support
Experience ultra-fast data transfers at 4.8 Gb/s with USB 3.0–the latest connectivity standard.
Built to connect easily with next-generation components and peripherals, USB 3.0 transfers
data 10X faster and is also backward compatible with USB 2.0 components.
True Serial ATA 6.0 Gb/s support
Supporting the next-generation Serial ATA (SATA) storage interface, this motherboard
delivers up to 6.0 Gb/s data transfer rates. Additionally, get enhanced scalability, faster data
retrieval, double the bandwidth of current bus systems. Refer to page 2-30 for details.
Green ASUS
This motherboard and its packaging comply with the European Union’s Restriction on the
use of Hazardous Substances (RoHS). This is in line with the ASUS vision of creating
environment-friendly and recyclable products/packaging to safeguard consumers’ health
while minimizing the impact on the environment.
1-2
Chapter 1: Product Introduction
1.3.2
ASUS unique features
ASUS Xtreme Design
Chapter 1
ASUS Xtreme Phase
ASUS True 16+2 Phase Power Design
The groundbreaking 16+2 phase VRM design is brought to the ASUS motherboards.
16+2 phase power design, 16-phase for vCore and extra 2-phase for QPI/Memory
controller inside CPU, can provide the highest power efficiency, and hence generates
less heat to effectively enhance the overclocking capability. With the high quality power
components such as low RDS (on) MOSFETs, Ferrite core chokes with lower hysteresis
loss, and 100% Japan-made high quality conductive polymer capacitors, ASUS 16+2
phase VRM design also ensure longer component life and minimum power loss.
ASUS Exclusive Features
MemOK!
Memory compatibility is among the top concerns during computer upgrades. Worry no
more. MemOK! is the fastest memory booting solution today. This remarkable memory
rescue tool requires nothing but a push of a buttton to patch memory issues and get
your system up and running in no time. The technology is able to determine failsafe
settings that can dramatically improve your system booting success. Refer to page
2-24 for details.
ASUS EPU
The ASUS EPU (Energy Processing Unit) provides total system power management by
detecting current PC loadings and intelligently moderating power usage for critical PC
components in real-time–helping save power and money!
Express Gate SSD
Express Gate™ is an ASUS exclusive OS that provides you with quick access to the
Internet and key applications before entering the Windows® OS. Refer to pages 3-34
and 4-8 for details.
ASUS Quiet Thermal Solutions
ASUS Quiet Thermal solutions make the system more stable and enhance the overclocking
capability.
Fanless Design—Heat-pipe solution
The Heat Pipe design effectively directs the heat generated by the chipsets to the
heatsink near the back IO ports, where it can be carried away by existing airflow from
CPU fan or bundled optional fan. The purpose of the innovative heat pipe design on
this motherboard is that the groundbreaking fanless design does not have lifetime
problems as a chipset fan does. Furthermore, it provides options for users to install
side-flow fan or passive cooler. The Heat Pipe design is the most reliable fanless
thermal solution to date.
DO NOT uninstall the heat-pipe by yourself. Doing so may bend the tubing and affect the
heat dissipation performance.
ASUS P6X58D Premium
1-3
Up to 20ºC (36ºF) Cooler—Stack Cool 3+
Chapter 1
Stack Cool 3+ is a fanless cooling solution offered exclusively by ASUS. It effectively
and noiselessly transfers heat generated by the critical components to the other side
of the specially designed PCB (printed circuit board) for effective heat dissipation—
making temperatures cooler by up to 20ºC.
Fan Xpert
ASUS Fan Xpert intelligently allows you to adjust both the CPU and chassis fan speeds
according to different ambient temperatures caused by different climate conditions
in different geographic regions and your PC’s loading. The built-in variety of useful
profiles offer flexible controls of fan speed to achieve a quiet and cool environment.
Refer to page 4-6 for details.
ASUS Crystal Sound
This feature can enhance speech-centric applications like Skype, online game, video
conference and recording.
Noise Filter
This feature detects repetitive and stationary noises (non-voice signals) like computer
fans, air conditioners, and other background noises then eliminates it in the incoming
audio stream while recording.
DTS Surround Sensation UltraPC
DTS Surround Sensation UltraPC delivers exceptional 5.1 surround experience
through the most common PC audio setups—your existing stereo speakers or
headphones. In addition to virtual surround, “Bass enhancement” provides stronger low
frequency bass sound, and “Voice clarification” provides clear human dialogue even
with loud background sound. With these technologies, you may experience a better
home-theater audio with ease.
ASUS EZ DIY
ASUS EZ DIY feature collection provides you with easy ways to install computer components,
update the BIOS, or back up your favorite settings.
ASUS Onboard Switch
With an easy press during overclocking, the exclusive onboard switches allow gamers
to effortless fine-tune the performance without having to short the pins! Refer to page
2-23 for details.
ASUS Q-Slot
ASUS Q-Slot enhances your DIY experience that speeds up and simplifies the DIY
process!
ASUS Q-Shield
ASUS Q-Shield’s special design makes it convenient and easy to install on your
motherboard. With better electric conductivity, it ideally protects your motherboard
against static electricity and shields it against Electronic Magnetic Interference (EMI).
1-4
Chapter 1: Product Introduction
ASUS Q-Connector
Chapter 1
ASUS Q-Connector allows you to easily connect or disconnect the chassis front panel
cables to the motherboard. This unique module eliminates the trouble of connecting the
system panel cables one at a time and avoiding wrong cable connections.
ASUS O.C. Profile
The motherboard features the ASUS O.C. Profile that allows you to conveniently store
or load multiple BIOS settings. The BIOS settings can be stored in the CMOS or a
separate file, giving you the freedom to share and distribute your favorite settings.
ASUS CrashFree BIOS 3
ASUS CrashFree BIOS 3 allows you to restore corrupted BIOS data from a USB flash
disk containing the BIOS file. This protection eliminates the need to buy a replacement
ROM chip.
ASUS EZ Flash 2
ASUS EZ Flash 2 is a user-friendly utility that allows you to update the BIOS without
using a bootable floppy disk or an OS-based utility.
ASUS MyLogo2™
This feature allows you to convert your favorite photo into a 256-color boot logo for a
more colorful and vivid image on your screen.
Multi-language BIOS
The multi-language BIOS allows you to select the language of your choice from the
available options. The localized BIOS setup menu helps you configure your system
easier and faster.
1.3.3
ASUS exclusive overclocking features
ASUS TurboV
Feel the adrenaline rush of real-time OC—now a reality with the ASUS TurboV. This easy OC
tool allows you to overclock without exiting or rebooting the OS; and its user-friendly interface
makes overclock with just a few clicks away. Moreover, the ASUS OC profiles in TurboV
provides the best O.C. settings in different scenarios.
Precision Tweaker 2
Allows you to adjust the CPU voltage in 0.00625v steps and NB/DRAM voltage in 0.02v
steps to fine-tune voltage to achieve the most precise setting for the ultimate overclocking
configuration.
C.P.R. (CPU Parameter Recall)
The BIOS C.P.R. feature automatically restores the CPU default settings when the system
hangs due to overclocking failure. C.P.R. eliminates the need to open the system chassis and
clear the RTC data. Simply shut down and reboot the system, and the BIOS automatically
restores the CPU parameters to their default settings.
ASUS P6X58D Premium
1-5
Chapter 1
1-6
Chapter 1: Product Introduction
Chapter 2
Chapter 2:
Hardware information
2.1
Before you proceed
Take note of the following precautions before you install motherboard components or change
any motherboard settings.
Unplug the power cord from the wall socket before touching any component.
•
Before handling components, use a grounded wrist strap or touch a safely grounded
object or a metal object, such as the power supply case, to avoid damaging them due
to static electricity.
•
Hold components by the edges to avoid touching the ICs on them.
•
Whenever you uninstall any component, place it on a grounded antistatic pad or in the
bag that came with the component.
•
Before you install or remove any component, ensure that the ATX power supply is
switched off or the power cord is detached from the power supply. Failure to do so
may cause severe damage to the motherboard, peripherals, or components.
Chapter 2
•
ASUS P6X58D Premium
2-1
2.2
Motherboard overview
2.2.1
Motherboard layout
Chapter 2
Refer to 2.8 Connectors for more information about rear panel connectors and internal
connectors.
2-2
Chapter 2: Hardware information
Layout contents
Connectors/Jumpers/Slots
Page
1.
ATX power connectors (24-pin EATXPWR, 8-pin EATX12V)
2-35
2.
CPU, chassis, and power fan connectors (4-pin CPU_FAN, 4-pin CHA_FAN1
3-pin CHA_FAN2–3, 3-pin PWR_FAN)
2-33
3.
LGA1366 CPU Socket
2-5
4.
DDR3 DIMM slots
2-10
5.
CPU / DRAM Bus / QPI DRAM overvoltage settings (3-pin OV_CPU;
3-pin OV_DRAM_BUS; 3-pin OV_QPI_DRAM)
2-22
6.
MemOK! switch (MEMOK)
2-24
7.Marvell® Serial ATA 6.0 Gb/s connectors
(7-pin SATA_6G_1, 7-pin SATA_6G_2 [gray])
2-30
8.
ICH10R Serial ATA 3.0 Gb/s connectors (7-pin SATA1–6 [blue])
2-29
9.
System panel connector (20-8 pin PANEL)
2-36
10.
USB connectors (10-1 pin USB56, USB78)
2-31
11.
IEEE 1394a port connector (10-1 pin IE1394_2)
2-32
12.
Onboard Reset switch
2-23
13.
Onboard Power-on switch
2-23
14.
Optical drive audio connector (4-pin CD)
2-32
15.
Front panel audio connector (10-1 pin AAFP)
2-34
16.
Digital audio connector (4-1 pin SPDIF_OUT)
2-34
ASUS P6X58D Premium
Chapter 2
2.2.2
2-3
2.2.3
Placement direction
When installing the motherboard, ensure that you place it into the chassis in the correct
orientation. The edge with external ports goes to the rear part of the chassis as indicated in
the image below.
2.2.4
Screw holes
Place nine screws into the holes indicated by circles to secure the motherboard to the
chassis.
DO NOT overtighten the screws! Doing so can damage the motherboard.
Chapter 2
Place this side towards
the rear of the chassis
2-4
Chapter 2: Hardware information
2.3
Central Processing Unit (CPU)
The motherboard comes with a surface mount LGA1366 socket designed for the Intel®
Core™ i7 Processor Extreme Edition / Core™ i7 Processor.
2.3.1
•
Upon purchase of the motherboard, ensure that the PnP cap is on the socket and
the socket contacts are not bent. Contact your retailer immediately if the PnP cap
is missing, or if you see any damage to the PnP cap/socket contacts/motherboard
components. ASUS will shoulder the cost of repair only if the damage is shipment/
transit-related.
•
Keep the cap after installing the motherboard. ASUS will process Return Merchandise
Authorization (RMA) requests only if the motherboard comes with the cap on the
LGA1366 socket.
•
The product warranty does not cover damage to the socket contacts resulting from
incorrect CPU installation/removal, or misplacement/loss/incorrect removal of the PnP
cap.
Chapter 2
Ensure that all power cables are unplugged before installing the CPU.
Installing the CPU
To install a CPU:
1.
Locate the CPU socket on the motherboard.
Before installing the CPU, ensure that the cam box is facing towards you and the load lever
is on your left.
ASUS P6X58D Premium
2-5
2.
Press the load lever with your thumb
(A), then move it to the left (B) until it is
released from the retention tab.
To prevent damage to the socket pins,
do not remove the PnP cap unless
you are installing a CPU.
3.
4.
Retention tab
A
B
Load lever
Lift the load lever in the direction of the
arrow to a 135º angle.
Load plate
Lift the load plate with your thumb and
forefinger to a 100º angle.
4
Chapter 2
3
5.
Remove the PnP cap from the CPU
socket.
PnP cap
2-6
Chapter 2: Hardware information
6.
Position the CPU over the socket,
ensuring that the gold triangle is on the
bottom‑left corner of the socket, and then
fit the socket alignment key into the CPU
notch.
The CPU fits in only one correct
orientation. DO NOT force the CPU
into the socket to prevent bending
the connectors on the socket and
damaging the CPU!
Gold
triangle
mark
CPU notch
7.
Chapter 2
Alignment key
Apply some Thermal Interface Material
to the exposed area of the CPU that the
heatsink will be in contact with, ensuring
that it is spread in an even thin layer.
Some heatsinks come with pre-applied
thermal paste. If so, skip this step.
The Thermal Interface Material is
toxic and inedible. DO NOT eat it. If
it gets into your eyes or touches your
skin, wash it off immediately, and seek
professional medical help.
To prevent contaminating the paste, DO NOT spread the paste with your finger directly.
8.
Close the load plate (A), then push
the load lever (B) until it snaps into the
retention tab.
A
B
ASUS P6X58D Premium
2-7
2.3.2
Installing the CPU heatsink and fan
The Intel LGA1366 processor requires a specially designed heatsink and fan assembly to
ensure optimum thermal condition and performance.
®
•
When you buy a boxed Intel® processor, the package includes the CPU fan and
heatsink assembly. If you buy a CPU separately, ensure that you use only Intel®‑certified
multi‑directional heatsink and fan.
•
Your Intel® LGA1366 heatsink and fan assembly comes in a push-pin design and
requires no tool to install.
If you purchased a separate CPU heatsink and fan assembly, ensure that the Thermal
Interface Material is properly applied to the CPU heatsink or CPU before you install the
heatsink and fan assembly.
Chapter 2
Ensure that you have installed the motherboard to the chassis before you install the CPU
fan and heatsink assembly.
To install the CPU heatsink and fan:
1.
2.
Place the heatsink on top of the installed
CPU, ensuring that the four fasteners
match the holes on the motherboard.
A
B
B
Push down two fasteners at a time in
a diagonal sequence to secure the
heatsink and fan assembly in place.
A
B
B
A
A
1
1
Orient the heatsink and fan assembly such that the CPU fan cable is closest to the CPU fan
connector.
2-8
Chapter 2: Hardware information
Connect the CPU fan cable to the connector on the motherboard labeled CPU_FAN.
Chapter 2
3.
DO NOT forget to connect the CPU fan connector! Hardware monitoring errors can occur if
you fail to plug this connector.
2.3.3
Uninstalling the CPU heatsink and fan
To uninstall the CPU heatsink and fan:
1. 2.
3.
4.
Disconnect the CPU fan cable from the
connector on the motherboard.
Rotate each fastener counterclockwise.
Pull up two fasteners at a time in a
diagonal sequence to disengage the
heatsink and fan assembly from the
motherboard.
A
B
B
A
A
B
B
A
Carefully remove the heatsink and fan assembly from the motherboard.
ASUS P6X58D Premium
2-9
2.4
System memory
2.4.1
Overview
The motherboard comes with six Double Data Rate 3 (DDR3) Dual Inline Memory Modules
(DIMM) sockets.
A DDR3 module has the same physical dimensions as a DDR2 DIMM but is notched
differently to prevent installation on a DDR2 DIMM socket. DDR3 modules are developed for
better performance with less power consumption.
The figure illustrates the location of the DDR3 DIMM sockets:
Chapter 2
Recommended memory configurations
One DIMM:
You may install one memory module in slot A1, B1 or C1 as a single-channel operation.
Two DIMMs (dual-channel operation):
DIMM A1
DIMM B1
DIMM A1
DIMM B1
DIMM A1
DIMM B1
DIMM A1
DIMM B1
DIMM A1
DIMM B1
DIMM C1
DIMM A1
DIMM B1
DIMM C1
Four DIMMs (triple-channel operation):
DIMM A2
DIMM A1
DIMM B1
DIMM C1
A2
DIMM
DIMM A1
DIMM B1
DIMM C1
2-10
DIMM A2
DIMM A1
DIMM B1
DIMM C1
A2
DIMM
DIMM A1
DIMM B1
DIMM C1
DIMM A2
DIMM A1
DIMM B2
DIMM B1
A2
DIMM C2
DIMM A1
C1
DIMM B2
DIMM B1
DIMM C2
DIMM C1
definition,
Three DIMMs (triple-channel operation):
DIMM A1
DIMM B1
DIMM C1
DIMM A1
DIMM B1
DIMM C1
Six DIMMs (triple-channel operation):
DIMM A2
DIMM A1
DIMM B2
DIMM B1
DIMM C2
A2
DIMM
DIMM C1
A1
DIMM
DIMM B2
DIMM B1
DIMM C2
DIMM will
C1
system
Due to Intel CPU spec
the
not boot if only one DIMM is installed
in DIMM slot A2, B2, or C2. Follow the illustrations above for recommended memory
configuration.
Chapter 2: Hardware information
2.4.2
Memory configurations
•
You may install varying memory sizes in Channel A, Channel B and Channel C. The
system maps the total size of the lower-sized channel for the dual-channel or
triple-channel configuration. Any excess memory from the higher-sized channel is then
mapped for single-channel operation.
•
Due to Intel spec definition, X.M.P. DIMMs and DDR3-1600 are supported for one
DIMM per channel only.
•
According to Intel® CPU spec, DIMM voltage below 1.65V is recommended to protect
the CPU.
•
Always install DIMMs with the same CAS latency. For optimum compatibility, we
recommend that you obtain memory modules from the same vendor.
•
Due to the memory address limitation on 32-bit Windows OS, when you install 4GB
or more memory on the motherboard, the actual usable memory for the OS can be
about 3GB or less. For effective use of memory, we recommend that you do any of the
following:
- Use a maximum of 3GB system memory if you are using a 32-bit Windows OS.
- Install a 64-bit Windows OS when you want to install 4GB or more on the
motherboard.
For more details, refer to the Microsoft® support site at
http://support.microsoft.com/kb/929605/en-us.
•
This motherboard does not support DIMMs made up of 512Mb (64MB) chips or less
(Memory chip capacity counts in Megabit, 8 Megabit/Mb = 1 Megabyte/MB).
•
The default memory operation frequency is dependent on its Serial Presence Detect
(SPD), which is the standard way of accessing information from a memory module.
Under the default state, some memory modules for overclocking may operate at a
lower frequency than the vendor-marked value. To operate at the vendor-marked
or at a higher frequency, refer to section 3.5 Ai Tweaker menu for manual memory
frequency adjustment.
•
For system stability, use a more efficient memory cooling system to support a full
memory load (6 DIMMs) or overclocking condition.
ASUS P6X58D Premium
Chapter 2
You may install 1GB, 2GB and 4GB unbuffered non‑ECC DDR3 DIMMs into the DIMM
sockets.
2-11
P6X58D Premium Motherboard Qualified Vendors Lists (QVL)
DDR3-2000 MHz capability
Vendor
Part No.
Size
SS/ Chip Chip NO.
DS Brand
Crucial
BL12864BE2009.8SFB3(EPP)
1GB
SS
G.SKILL
F3-16000CL9D-4GBTD(XMP)
4GB(2 x 2GB) DS N/A
G.SKILL
G.SKILL
G.SKILL
GEIL
F3-16000CL9D-4GBRH(XMP)
F3-16000CL7T-6GBPS(XMP)
F3-16000CL9T-6GBPS(XMP)
GU34GB2000C9DC(XMP)
N/A
4GB(2 x 2GB) DS N/A
6GB(3 x 2GB) DS N/A
6GB(3 x 2GB) DS N/A
4GB(2 x 2GB) DS N/A
KINGSTON KHX2000C8D3T1K3/3GX(XMP) 3GB(3 x 1GB) SS
N/A
KINGSTON KHX2000C8D3T1K3/6GX(XMP) 6GB(3 x 2GB) DS N/A
KINGSTON KHX2000C9D3T1K3/6GX(XMP) 6GB(3 x 2GB) DS N/A
OCZ
OCZ3FXT20002GK
2GB(2 x 1GB) SS
OCZ
OCZ3B2000LV6GK
6GB(3 x 2GB) DS N/A
OCZ
Gingle
Patriot
Chapter 2
Patriot
OCZ3P20002GK(EPP)
9CAASS37AZZ01D1
PVS32G2000LLKN
PVT36G2000LLK(XMP)
2GB(2 x 1GB) SS
2GB
N/A
N/A
DS N/A
2GB(2 x 1GB) SS
N/A
6GB(3 x 2GB) DS N/A
Timing
Lable(Bios)
DIMM socket
Voltage support (Optional)
A*
B*
Heat-Sink Package 9-9-9-28(1333-9-9-9-24) 2
V
V
Heat-Sink Package 9-9-9-24 (1333-9-9-9-24) 1.65
V
V
Heat-Sink Package 9-9-9-24 (1333-9-9-9-24) 1.65
Heat-Sink Package 7-8-7-20(1066-8-8-8-20) 1.65
Heat-Sink Package 9-9-9-24(1066-8-8-8-20) 1.65
Heat-Sink Package 9-9-9-28 (1333-7-7-7-24) 2
Heat-Sink Package 8(1333-9-9-9-24)
1.65
Heat-Sink Package 9 (1333-9-9-9-24)
1.65
Heat-Sink Package 8(1333-9-9-9-21)
Heat-Sink Package 8
Heat-Sink Package 9
Heat-Sink Package 7-8-7(1066-9-9-9-24)
Heat-Sink Package 9-9-9-24
1.65
1.9
1.9
1.65
N/A
Heat-Sink Package 9-9-9-24(1066-7-7-7-20) 2
Heat-Sink Package 8-8-8-24(1067-9-9-9-24) 1.65
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
P6X58D Premium Motherboard Qualified Vendors Lists (QVL)
DDR3-1866 MHz capability
SS/ Chip Chip NO.
DS Brand
DIMM socket
Voltage support (Optional)
A*
B*
Timing
Lable(Bios)
Vendor
Part No.
Size
CORSAIR
TR3X3G1866C9DVer4.1(XMP)
3GB(3 x 1GB) SS N/A
Heat-Sink Package 9-9-9-24(1866-9-9-9-24) 1.65
G.SKILL
F3-15000CL9D-4GBRH (XMP)
4GB(2 x 2GB) DS N/A
Heat-Sink Package 9-9-9-24 (1333-9-9-9-24) 1.65
CORSAIR
TR3X6G1866C9DVer4.1(XMP)
G.SKILL
F3-15000CL9D-4GBTD(XMP)
OCZ
OCZ3RPR1866C9LV3GK
OCZ
OCZ3P1866C9LV6GK
KINGSTON KHX1866C9D3T1K3/6GX(XMP)
OCZ
OCZ
OCZ3P1866LV4GK
OCZ3RPR1866C9LV6GK
Super Talent W1866UX2GB(XMP)
Patriot
Team
PVS32G1866LLK(XMP)
6GB(3 x 2GB) DS N/A
4GB(2 x 2GB) DS N/A
6GB(3 x 2GB) DS N/A
3GB(3 x 1GB) SS N/A
4GB(2 x 2GB) DS N/A
6GB(3 x 2GB) DS N/A
6GB(3 x 2GB) DS N/A
2GB(2 x 1GB) SS N/A
2GB(2 x 1GB) SS N/A
BoxP/N:TXD34096M1866HC7DC-L 4GB(2 x 2GB) DS N/A
(TXD32048M1866HC7-L)(XMP)
Heat-Sink Package 9-9-9-24(1866-9-9-9-24) 1.65
V
V
Heat-Sink Package 9-9-9-24 (1333-9-9-9-24) 1.65
Heat-Sink Package 9(1333-9-9-9-24)
1.65
Heat-Sink Package 9-9-9(1067-9-9-9-24)
1.65
Heat-Sink Package 9-9-9(1066-7-7-7-20)
Heat-Sink Package 9-9-9(1066-7-7-7-20)
Heat-Sink Package 9-9-9(1066-7-7-7-20)
V
1.65
V
1.65
Heat-Sink Package 8-8-8-24(1866-8-8-8-24) 1.9
Heat-Sink Package 7-7-7-21(1333-9-9-9-24) 1.65
V
V
V
1.65
Heat-Sink Package 8-8-8-24(1333-9-9-9-24) N/A
V
V
V
V
V
V
V
V
V
V
V
V
P6X58D Premium Motherboard Qualified Vendors Lists (QVL)
DDR3-1800 MHz capability
2-12
Size
Voltage
DIMM socket
support (Optional)
Heat-Sink Package 8-8-8-24
1.80
V
SS/ Chip Chip NO.
DS Brand
Timing
Lable(Bios)
Vendor
Part No.
CORSAIR
BoxP/N:TW3X4G1800C8DF
(CM3X2G1800C8D)Ver4.1(XMP) 4GB(2 x 2GB) DS N/A
OCZ
OCZ3P18002GK
Heat-Sink Package 8
Patriot
PVS32G1800LLKN(EPP)
A*
B*
KINGSTON KHX1800C9D3T1K3/6GX(XMP)
6GB(3 x 2GB) DS N/A
Heat-Sink Package (1333-9-9-9-24)
1.65~1.85 V
V
Transcend
2GB(2 x 1GB) SS N/A
Heat-Sink Package 8
1.65-1.85 V
V
TX1800KLU-2GK(XMP)
2GB(2 x 1GB) SS N/A
2GB(2 x 1GB) SS N/A
1.65-1.85 V
Heat-Sink Package 8-8-8-20(1066-7-7-7-20) 1.9
V
V
V
Chapter 2: Hardware information
P6X58D Premium Motherboard Qualified Vendors Lists (QVL)
DDR3-1600 MHz capability
DIMM socket
support (Optional)
Part No.
Size
SS/ Chip
DS Brand
Chip NO.
Timing
Lable(Bios)
A-DATA
AD31600G001GMU
1GB
SS N/A
Heat-Sink Package
9-9-9-24 (1333-8-8-8-24) 1.65~1.85 V
A-DATA
AX3U1600PB1G8-2P
2GB(2 x 1GB) SS N/A
Heat-Sink Package
8-8-8-24(1333-9-9-9-24) 1.65-1.85 V
A-DATA
A-DATA
A-DATA
A-DATA
A-DATA
A-DATA
A-DATA
A-DATA
A-DATA
A-DATA
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
Crucial
Crucial
G.SKILL
G.SKILL
G.SKILL
G.SKILL
G.SKILL
G.SKILL
GEIL
KINGMAX
KINGMAX
AX3U1600GB1G9-AG
AD31600E001GMU
AX3U1600GB1G9-3G
AX3U1600PB1G8-3P
AX3U1600GB2G9-AG(XMP)
AX3U1600XB2G7-EF(XMP)
AD31600F002GMU(XMP)
AX3U1600GB2G9-3G(XMP)
AX3U1600GB2G9-3G(XMP)
AX3U1600XB2G7-FF(XMP)
TR3X3G1600C8D
2GB(2 x 1GB) SS N/A
3GB(3 x 1GB) SS N/A
3GB(3 x 1GB) SS N/A
3GB(3 x 1GB) SS N/A
4GB(2 x 2GB) DS N/A
4GB(2 x 2GB) DS N/A
6GB(3 x 2GB) DS N/A
6GB(3 x 2GB) DS N/A
6GB(3 x 2GB) DS N/A
6GB(3 x 2GB) DS N/A
3GB(3 x 1GB) SS N/A
TR3X3G1600C8DVer2.1(XMP) 3GB(3 x 1GB) SS N/A
TR3X3G1600C9Ver1.1(XMP)
3GB(3 x 1GB) SS N/A
BoxP/N:TW3X4G1600C9DHXNV 4GB(2 x 2GB) DS N/A
(CM3X2G1600C9DHXNV)Ver4.1
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
8-8-8-24(1333-9-9-9-24) 1.65-1.85 V
9-9-9-24 (1333-8-8-8-24) 1.65~1.85 V
8-8-8-24(1333-9-9-9-24) 1.65-1.85 V
9-9-9-24 (1600-9-9-9-24) 1.65~1.85 V
7-7-7-20(1333-9-9-9-24) 1.75-1.85 V
7-7-7-20(1333-9-9-9-24) 1.75-1.85 V
9-9-9-24 (1600-9-9-9-24) 1.65~1.85 V
9-9-9-24 (1600-9-9-9-24) 1.65~1.85 V
7-7-7-20(1333-9-9-9-24) 1.75-1.85 V
8-8-8-24(1600-8-8-8-24) 1.65
V
9-9-9-24(1601-9-9-9-24) 1.65
V
8-8-8-24(1601-8-8-8-24) 1.65
Patriot
V
6GB(3 x 2GB) DS N/A
BL25664BN1608.16FF(XMP)
2GB
BL12864BA1608.8SFB(XMP)
F3-12800CL9D-2GBNQ
F3-12800CL9D-4GBRL
F3-12800CL7D-4GBRH(XMP)
F3-12800CL8T-6GBHK(XMP)
F3-12800CL8T-6GBPI(XMP)
F3-12800CL9T-6GBNQ
GV34GB1600C8DC
FLGD45F-B8KG9-NAES
FLGE85F-B8KG9-NEES
1GB
SS N/A
DS N/A
2GB(2 x 1GB) SS N/A
2GB(2 x 1GB) SS N/A
4GB(2 x 2GB) DS N/A
6GB(3 x 2GB) DS N/A
6GB(3 x 2GB) DS N/A
6GB(3 x 2GB) DS N/A
4GB(2 x 2GB) DS N/A
1GB
2GB
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
8-8-8-24(1600-8-8-8-24) 1.65
9-9-9-24(1333-9-9-9-24) 1.65
(1601-8-8-8-24)
1.8
(1333-9-9-9-24)
1.6
8-8-8-24 (1333-9-9-9-24) 1.65
(1333-9-9-9-24)
8-8-8-21(1333-8-8-8-21) 1.6-1.65
8-8-8-21(1066-8-8-8-20) 1.6~1.65
9-9-9-24(1601-9-9-9-24) 1.5-1.6
8-8-8-28(1600-8-8-8-28) 1.6
SS KINGMAX KFB8FNGXF-ANX-12A 9(1600-9-8-9-28)
DS KINGMAX KFB8FNGXF-ANX-12A 9(1600-9-8-9-28)
OCZ3G1600LV3GK
OCZ3P1600EB4GK
OCZ3P1600LV4GK
OCZ3X16004GK(XMP)
OCZ3FXE1600C7LV6GK
OCZ3G1600LV6GK
OCZ3G1600LV6GK
OCZ3X1600LV6GK(XMP)
OCZ3X1600LV6GK(XMP)
6GB(3 x 2GB) DS N/A
M2F2G64CB8HA4N-DG
SS N/A
3GB(3 x 1GB) SS N/A
3GB(3 x 1GB) SS N/A
4GB(2 x 2GB) DS N/A
4GB(2 x 2GB) DS N/A
4GB(2 x 2GB) DS N/A
6GB(3 x 2GB) DS N/A
6GB(3 x 2GB) DS N/A
6GB(3 x 2GB) DS N/A
6GB(3 x 2GB) DS N/A
6GB(3 x 2GB) DS N/A
6GB(3 x 2GB) DS N/A
2GB(2 x 1GB) DS N/A
2GB
DS Elixir
DS N/A
996657
4GB(2 x 2GB) DS N/A
PVT33G1600ELK
3GB(3 x 1GB) SS N/A
998659(XMP)
PGS34G1600LLKA
PVS34G1600ELK
PVS34G1600LLKN
PVT36G1600ELK
PVT36G1600ELK
PVT36G1600LLK(XMP)
ASUS P6X58D Premium
6GB(3 x 2GB) DS N/A
4GB(2 x 2GB) DS N/A
4GB(2 x 2GB) DS N/A
4GB(2 x 2GB) DS N/A
6GB(3 x 2GB) DS N/A
6GB(3 x 2GB) DS N/A
6GB(3 x 2GB) DS N/A
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
N2CB1G80AN-DG
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
1.6
7-7-7-24(1333-8-8-8-24) 1.65
8(1333-9-9-9-24)
1.5
1.5
1.65
1.65
1.65
7-6-6-24(1333-7-7-7-20) N/A
8-8-8(1066-7-7-7-20)
1.65
7-7-6(1333-7-7-7-20)
1.8
7-7-7(1066-7-7-7-20)
7-7-7(1067-7-7-7-20)
7-7-7(1066-7-7-7-16)
7-7-7(1066-9-9-9-24)
8-8-8(1066-7-7-7-20)
8-8-8(1066-7-7-7-16)
8-8-8(1600-8-8-8-24)
8-8-8(1066-7-7-7-16)
(1333-8-8-8-24)
1.65
1.65
1.9
1.65
1.65
1.65
1.65
1.65
N/A
7-7-7-14(1066-7-7-7-20) 1.7-1.9
9(1333-9-9-9-28)
N/A
7-7-7-20
N/A
(1333-8-8-8-24)
N/A
9-9-9-24(1333-9-9-9-24) 1.5-1.6
9-9-9-24(1066-7-7-7-20) 1.65
7-7-7-20(1067-7-7-7-20) 1.7
9-9-9-24(1066-7-7-7-20) 1.8
7-7-7-20(1066-7-7-7-20) 2.0
9-9-9-24(1066-7-7-7-20) 1.65
9-9-9-24(1600-7-7-7-20) 1.65
8-8-8-24(1067-7-7-7-20) 1.65
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
TR3X6G1600C9Ver2.1(XMP)
Heat-Sink Package
V
V
V
M2Y2G64CB8HA9N-DG(XMP) 2GB
Patriot
V
V
V
Elixir
Patriot
V
V
V
8-8-8-24(1601-8-8-8-24) 1.65
CS322271
Patriot
V
V
Heat-Sink Package
6GB(3 x 2GB) DS N/A
Cell Shock
Patriot
V
V
V
TR3X6G1600C8DVer2.1(XMP) 6GB(3 x 2GB) DS N/A
Super Talent WB160UX6GB(XMP)
PATRIOT
V
V
V
TR3X6G1600C8D
OCZ3P1600LV3GK
Patriot
V
V
V
V
OCZ
Mushkin
V
V
V
V
1GB
Mushkin
V
V
V
OCZ3P1600EB1G
Elixir
V
V
V
OCZ
OCZ
V
8-8-8-24(1333-9-9-9-24) 1.65
9(1333-9-9-9-24)
OCZ
V
V
Heat-Sink Package
Heat-Sink Package
OCZ
V
4GB(2 x 2GB) DS N/A
CMD4GX3M2A1600C8(XMP)
4GB(2 x 2GB) DS N/A
OCZ
V
V
KINGSTON KHX1600C9D3K3/6GX(XMP)
OCZ
D*
V
1.80
KINGSTON KHX1600C8D3K2/4GX(XMP)
OCZ
C*
V
(1333-9-9--9-24)
(1066-7-7-7-20)
OCZ
V
B*
Heat-Sink Package
Heat-Sink Package
OCZ
A*
9-9-9-24 (1333-8-8-8-24) 1.65~1.85 V
KINGSTON KHX1600C9D3K3/12GX(XMP) 12GB(3 x 4GB) DS N/A
OCZ
Voltage
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
2-13
Chapter 2
Vendor
P6X58D Premium Motherboard Qualified Vendors Lists (QVL)
DDR3-1333 MHz capability
Vendor
Part No.
Size
SS/ Chip
DS Brand
Chip NO.
Timing
Lable(Bios)
A-DATA
AD3133301GOU
1GB
SS A-DATA
AD30908C8D-15IG
(1333-9-9-9-24)
A-DATA
AD3U1333B2G9-2
2GB
DS A-DATA
AD30908C8D-15IG
(1333-9-9-9-24)
A-DATA
A-DATA
A-DATA
A-DATA
A-DATA
AD31333002GOU
AX3U1333PB2G7-2P
AD3U1333C4G9-B
AD31333E002G0U
AX3U1333PB2G7-3P
CORSAIR TR3X3G1333C9 (Ver2.1)
CORSAIR CM3X1024-1333C9DHX
CORSAIR BoxP/N:TWIN3X2048-1333C9
(CM3X1024-1333C9)Ver1.1
DS A-DATA
4GB(2 x 2GB) DS N/A
4GB
DS Hynix
6GB(3 x 2GB) DS N/A
6GB(3 x 2GB) DS N/A
3GB(3 x 1GB) SS N/A
1GB
DS N/A
AD30908C8D-15IG
Heat-Sink Package
H5TQ2G83AFRH9C
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
(1333-9-9-9-24)
N/A
V
V
V
V
N/A
V
V
V
V
N/A
V
7-7-7-20(1333-9-9-9-24) 1.65-1.85 V
1333-9-9-9-24
N/A
V
7-7-7-20(1333-9-9-9-24) 1.65-1.85 V
7-7-7-20(1333-9-9-9-24) 1.65-1.85 V
9-9-9-24(1333-9-9-9-24) 1.5
(1333-9-9-9-24)
1.1
V
V
V
V
V
V
V
V
Chapter 2
2GB(2 x 1GB) DS N/A
Heat-Sink Package
9-9-9-24(1066-7-7-7-20) 1.70
V
V
CORSAIR BoxP/N:TW3X4G1333C9DHX
(CM3X2048-1333C9DHX)Ver3.2 4GB(2 x 2GB) DS N/A
Heat-Sink Package
9-9-9-24(1066-7-7-7-20) 1.70
V
V
Crucial
CT12864BA1339.8FF
D9KPT
9-9-9-24(1333-9-9-9-24) 1.5
V
Crucial
CT12872BA1339.9FF
V
CORSAIR TR3X6G1333C9 (Ver2.1)
6GB(3 x 2GB) DS N/A
Heat-Sink Package
Crucial
1GB
MT8JF12864AY-1G4D1 (1333-9-9-9-24)
CT12864BA1339.8SFD
1GB
SS MICRON
1GB
SS MICRON
SS MICRON
D9KPT(ECC)
Crucial
BL25664BN1337.16FF(XMP) 2GB
DS N/A
Heat-Sink Package
Crucial
CT25664BA1339.16FF
2GB
DS MICRON
D9KPT
Crucial
CT25672BA1339.18FF
2GB
DS MICRON
D9KPT(ECC)
Crucial
Crucial
ELPIDA
ELPIDA
G.SKILL
G.SKILL
G.SKILL
G.SKILL
G.SKILL
G.SKILL
G.SKILL
G.SKILL
G.SKILL
G.SKILL
GEIL
GEIL
Hynix
Hynix
Hynix
CT25664BA1339.16SFD
BL25664BA1336.16SFB1
EBJ10UE8BAW0-DJ-E
EBJ21UE8BAW0-DJ-E
F3-10600CL7D-2GBPI
F3-10600CL8D-2GBHK
F3-10666CL7T-6GBPK(XMP)
F3-10666CL7D-4GBPI(XMP)
F3-10666CL7D-4GBRH(XMP)
F3-10666CL8D-4GBHK(XMP)
GG34GB1333C9DC
GV34GB1333C7DC
HMT112U6BFR8C-H9
HMT125U6BFR8C-H9
HMT125U6BFR8C-H9
MICRON
MT8JTF12864AZ-1G4F1
MICRON
MT9JSF12872AZ-1G4F1
OCZ
OCZ
OCZ
OCZ
OCZ
OCZ
2GB
SS ELPIDA
DS ELPIDA
2GB(2 x 1GB) SS N/A
2GB(2 x 1GB) SS N/A
2GB
DS N/A
4GB(2 x 2GB) DS N/A
4GB(2 x 2GB) DS N/A
4GB(2 x 2GB) DS N/A
6GB(3 x 2GB) DS N/A
KINGSTON KVR1333D3N9/4G
MICRON
1GB
F3-10666CL9T-6GBNQ
F3-10666CL9D-4GBRL
KINGSTON KVR1333D3N9/2G
MICRON
4GB(2 x 2GB) DS NA
4GB(2 x 2GB) DS N/A
KINGSTON KVR1333D3N9/1G
MICRON
DS MICRON
F3-10666CL9D-4GBNQ
KINGSTON KVR1333D3N9/1G
MICRON
2GB
F3-10666CL8D-4GBRM(XMP) 4GB(2 x 2GB) DS N/A
KINGMAX FLFD45F-B8EE9
2-14
2GB
DIMM socket
Voltage support (Optional)
A* B* C* D*
MT8JTF12864AZ-1G4F1
MT16JF25664AZ-1G4F1
MT16JTF25664AZ-1G4F1
MT18JSF25672AZ-1G4F1
OCZ3RPX1333EB2GK
OCZ3G1333LV3GK
OCZ3P1333LV3GK
OCZ3P13332GK
OCZ3P13334GK
OCZ3P1333LV4GK
4GB(2 x 2GB) DS N/A
4GB(2 x 2GB) DS GEIL
4GB(2 x 2GB) DS N/A
1GB
SS Hynix
2GB
DS Hynix
2GB
1GB
1GB
1GB
2GB
4GB
1GB
1GB
1GB
2GB
2GB
2GB
1GB
DS Hynix
SS ELPIDA
SS Hynix
SS ELPIDA
DS Qimonda
Heat-Sink Package
J1108BABG-DJ-E
J1108BABG-DJ-E
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
GL1L128M88BA12N
Heat-Sink Package
H5TQ1G83BFR
H5TQ1G83BFR
H5TQ1G83BFRH9C
J1108BASE-DJ-E
H5TQ1G83BFR
J1108BABG-DJ-E
N/A
9(1333-9-9-9-24)
N/A
7-7-7-24
(1333-9-9-9-24)
D9KPT(ECC)
DS MICRON
DS MICRON
DS MICRON
SS N/A
3GB(3 x 1GB) SS N/A
DS N/A
4GB(2 x 2GB) DS N/A
4GB(2 x 2GB) DS N/A
D9KPT
9FF22 D9KPT
D9KPT(ECC)
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
9(1333-9-9-9-24)
N/A
V
V
V
V
9(1333-9-9-9-24)
N/A
V
V
V
V
(1333-9-9-9-24)
N/A
6-6-6-20(1333-9-9-9-24) 1.8
9(1333-9-9-9-24)
N/A
(1337-7-7-7-18)
1.65
9(1333-9-9-9-24)
(1337-8-8-8-22)
N/A
1.65
7-7-7-18(1333-7-7-7-18) 1.5-1.6
7-7-7-21(1333-9-9-9-24) 1.5
7-7-7-21(1333-9-9-9-24) 1.5
8-8-8-21(1333-7-7-7-20) 1.5-1.6
8-8-8-21(1333-7-7-7-20) 1.5-1.6
(1333-9-9-9-24)
(1333-9-9-9-24)
1.65
1.65
9-9-9-24(1333-9-9-9-24) 1.5
9-9-9-24 (1333-9-9-9-24) 1.3
7-7-7-24(1333-8-8-8-28) 1.5
9(1333-9-9-9-24)
N/A
9(1333-9-9-9-24)
N/A
9(1333-9-9-9-24)
(1333-9-9-9-24)
9(1333-9-9-9-24)
9(1066-8-7-7-20)
9(1333-9-9-9-24)
SS MICRON
V
V
V
SS MICRON
D9KPT
V
V
V
9(1333-9-9-9-24)
9FF22 D9KPT
V
V
V
IDSH1G-03A1F1C-13H 9(1333-9-9-9-24)
SS MICRON
N/A
V
V
V
1.65
DS SAMSUNG K4B2G0846B-HCH9
3GB(3 x 1GB) SS N/A
1GB
D9JNM
9(1333-9-9-9-24)
V
9(1066-8-8-8-20)
9(1333-9-9-9-24)
9(1333-9-9-9-24)
9(1066-8-8-8-20)
9(1333-9-9-9-24)
(1066-6-5-5-20)
9-9-9(1066-7-7-7-20)
7-7-7(1066-7-7-7-16)
N/A
N/A
1.5
1.5
1.5
1.5
N/A
N/A
N/A
N/A
N/A
N/A
N/A
1.65
1.65
7-7-7-20(1333-9-9-9-24) N/A
7(1333-7-7-7-20)
7-7-7(1067-9-9-9-24)
1.8
1.65
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
Chapter 2: Hardware information
P6X58D Premium Motherboard Qualified Vendors Lists (QVL)
DDR3-1333 MHz capability (cont.)
Chip NO.
Timing
Lable(Bios)
4GB(2 x 2GB) DS N/A
Heat-Sink Package
(1066-6-5-5)
DIMM socket
Voltage support (Optional)
A* B* C* D*
1.85
V V
6GB(3 x 2GB) DS N/A
Heat-Sink Package
7-7-7(1066-7-7-7-20)
1.65
Part No.
Size
OCZ
OCZ3RPX1333EB4GK
OCZ
OCZ3P1333LV6GK
OCZ
OCZ
OCZ3G1333LV6GK
OCZX1333LV6GK(XMP)
SAMSUNG M378B2873DZ1-CH9
SAMSUNG M378B2873EH1-CH9
SAMSUNG M391B2873DZ1-CH9
SAMSUNG M378B5673DZ1-CH9
SAMSUNG M378B5673EH1-CH9
SAMSUNG M391B5673DZ1-CH9
SAMSUNG M378B5273BH1-CH9
Super
Talent
W1333UX2GB(XMP)
SS/ Chip
DS Brand
6GB(3 x 2GB) DS N/A
6GB(3 x 2GB) DS NA
Heat-Sink Package
Heat-Sink Package
1GB
SS SAMSUNG K4B1G0846D
1GB
SS SAMSUNG K4B1G0846D(ECC)
1GB
2GB
2GB
2GB
4GB
SS SAMSUNG K4B1G0846E
DS SAMSUNG K4B1G0846D
DS SAMSUNG K4B1G0846E
DS SAMSUNG K4B1G0846D(ECC)
DS SAMSUNG K4B2G0846B-HCH9
2GB(2 x 1GB) SS N/A
Heat-Sink Package
9-9-9(1066-7-7-7-20)
8-8-8(1066-7-7-7-16)
9(1333-9-9-9-24)
(1066-8-7-7-20)
9(1333-9-9-9-24)
9(1333-9-9-9-24)
(1066-8-7-7-20)
9(1333-9-9-9-24)
9(1333-9-9-9-24)
1.65
V
V
V
1.6
V
V
V
V
V
V
N/A
N/A
N/A
N/A
N/A
N/A
N/A
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
8(1333-8-8-8-24)
1.8
V
V
V
V
Transcend TS128MLK64V3U
1GB
SS SAMSUNG K4B1G0846D
9(1333-9-9-9-24)
N/A
V
V
V
V
Asint
SLY3128M8-EDJ
1GB
SS Asint
DDRIII1208-DJ
(9-9-9-24)
N/A
V
V
V
V
Asint
SLZ3128M8-EDJ
DS Asint
DDRIII1208-DJ
Transcend TS256MLK64V3U
Asint
Asint
ASUS
ATP
ATP
ATP
ATP
SLY3128M8-EDJE
SLZ3128M8-EDJE
N/A
AQ28M64A8BJH9S
AQ28M72D8BJH9S
AQ56M64B8BJH9S
AQ56M72E8BJH9S
BUFFALO FSX1333D3G-1G
BUFFALO FSH1333D3G-T3G(XMP)
BUFFALO FSX1333D3G-2G
Elixir
M2Y2G64CB8HA9N-CG
Patriot
PVT33G1333ELK
Patriot
Patriot
Patriot
Patriot
Silicon
Power
Silicon
Power
PDC32G1333LLK
PVS34G1333ELK
PVS34G1333LLK
PVT36G1333ELK
2GB
1GB
2GB
2GB
1GB
1GB
1GB
2GB
2GB
1GB
DS SAMSUNG K4B1G0846D
SS ELPIDA
DS ELPIDA
DS N/A
J1108BASE-DJ-E
J1108BASE-DJ-E
Heat-Sink Package
SS SAMSUNG K4B1G0846E
SS SAMSUNG K4B1G0846D(ECC)
DS SAMSUNG K4B1G0846D
DS SAMSUNG K4B1G0846D(ECC)
SS N/A
Heat-Sink Package
2GB
DS N/A
Heat-Sink Package
1GB
SS PATRIOT
3GB(3 x 1GB) SS N/A
2GB
DS N/A
3GB(3 x 1GB) SS N/A
4GB(2 x 2GB) DS N/A
4GB(2 x 2GB) DS N/A
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
(1066-8-8-8-20)
(9-9-9-24)
(1066-8-8-8-20)
(1333-9-9-9-24)
(1333-9-9-9-24)
(1333-9-9-9-24)
(1333-9-9-9-24)
(1333-9-9-9-24)
(1066-7-7-7-20)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
7-7-7-20(1066-8-7-7-20) N/A
(1066-7-7-7-20)
N/A
7(1337-7-7-7-20)
1.7
(1333-7-7-7-20)
N/A
9-9-9-24(1066-7-7-7-20) 1.65
9-9-9-24(1066-7-7-7-20) 1.5
7-7-7-20(1066-7-7-7-20) 1.7
9-9-9-24(1066-7-7-7-20) 1.65
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
SP001GBLTU133S02
1GB
SS S-POWER I0YT3E0
9(1333-9-9-9-24)
N/A
V
V
V
V
SP002GBLTU133S02
2GB
DS S-POWER I0YT3E0
9(1333-9-9-9-24)
N/A
V
V
V
V
ASUS P6X58D Premium
6GB(3 x 2GB) DS N/A
Heat-Sink Package
9(1333-9-9-9-24)
2-15
Chapter 2
Vendor
P6X58D Premium Motherboard Qualified Vendors Lists (QVL)
DDR3-1066 MHz capability
Vendor
Part No.
Size SS/
DS
Chip
Brand
Chip NO.
Timing
Lable(Bios)
CORSAIR
CM3X1024-1066C7
1GB DS
N/A
Heat-Sink Package
7
Crucial
CT12864BA1067.8SFD
1GB SS
MICRON
D9JNL
7
Crucial
Crucial
Crucial
Crucial
Crucial
ELPIDA
ELPIDA
ELPIDA
ELPIDA
Hynix
Hynix
Hynix
Chapter 2
Hynix
CT12864BA1067.8FF
CT12872BA1067.9FF
CT25664BA1067.16FF
CT25664BA1067.16SFD
CT25672BA1067.18FF
EBJ10UE8BAW0-AE-E
EBJ11RD8BAFA-AE-E
EBJ11UD8BAFA-AG-E
EBJ21UE8BAW0-AE-E
HMT112U6AFP8C-G7N0
HYMT112U64ZNF8-G7
HMT125U6AFP8C-G7N0
HYMT125U64ZNF8-G7
KINGSTON KVR1066D3N7/1G
KINGSTON KVR1066D3N7/1G
KINGSTON KVR1066D3N7/2G
KINGSTON KVR1066D3N7/2G
KINGSTON KVR1066D3N7/4G
MICRON
MT8JTF12864AY-1G1D1
MICRON
MT8JTF12864AZ-1G1F1
MICRON
MICRON
MICRON
MICRON
MICRON
MICRON
MT8JTF12864AZ-1G1F1
MT9JSF12872AZ-1G1F1
1GB SS
1GB SS
2GB DS
2GB DS
2GB DS
1GB SS
1GB DS
1GB DS
2GB DS
1GB SS
1GB SS
2GB DS
2GB DS
1GB SS
1GB SS
2GB DS
2GB DS
4GB DS
1GB SS
1GB SS
1GB SS
1GB SS
MT16JTF25664AY-1G1D1 2GB DS
MT16JTF25664AZ-1G1F1 2GB DS
MT16JTF25664AZ-1G1F1 2GB DS
MT18JSF25672AZ-1G1F1 2GB DS
SAMSUNG M378B5273BH1-CF8
4GB DS
Asint
1GB SS
Transcend
TS256MLK64V1U
Asint
SLZ3128M8-EAE
Elixir
WINTEC
SLY3128M8-EAE
M2Y2G64CB8HA9N-BE
3DU3191A-10
2GB DS
2GB DS
2GB DS
1GB DS
MICRON
MICRON
MICRON
MICRON
MICRON
ELPIDA
ELPIDA
ELPIDA
ELPIDA
HYNIX
HYNIX
HYNIX
HYNIX
D9KPT
D9KPT(ECC)
D9KPT
D9JNL
D9KPT(ECC)
J1108BABG-DJ-E
J5308BASE-AC-E(ECC)
J5308BASE-AC-E
J1108BABG-DJ-E
H5TQ1G83AFPG7C
HY5TQ1G831ZNFP-G7
H5TQ1G83AFPG7C
HY5TQ1G831ZNFP-G7
KINGSTON D1288JEKAPA7U
ELPIDA
J1108BABG-DJ-E
ELPIDA
J1108BABG-DJ-E
MICRON
7VD22
MICRON
D9KPT
KINGSTON D1288JEKAPGA7U
SAMSUNG K4B2G0846B-HCF8
MICRON
MICRON
MICRON
MICRON
MICRON
MICRON
8ZF22 D9KPV
D9KPT(ECC)
7VD22
8ZF22 D9KPV
D9KPT
D9KPT(ECC)
SAMSUNG K4B2G0846B-HCF8
ELPIDA
J1108BABG-AE-E
Asint
DDRIII1208-AE
Asint
N/A
Qimonda
DDRIII1208-AE
Heat-Sink Package
IDSH51-03A1F1C-10F
DIMM socket
Voltage support (Optional)
A*
B*
C*
D*
1.1
V
V
V
N/A
V
V
V
7(1066-7-7-7-20) N/A
7(1066-9-9-9-25) N/A
7(1066-7-7-7-20) N/A
7
N/A
7(1066-7-7-7-20) N/A
7(1066-7-7-7-20) N/A
7
N/A
8
N/A
7(1066-7-7-7-20) N/A
7
N/A
7
N/A
7
N/A
7
N/A
7(1067-7-7-7-20) 1.5
(1066-7-7-7-20)
1.5
(1066-7-7-7-20)
1.5
7
N/A
7(1067-7-7-7-20) 1.5
(1066-7-7-7-20)
1.5
7(1066-7-7-7-20) N/A
7(1066-7-7-7-20) N/A
7(1066-9-9-9-25) N/A
7
N/A
7(1066-7-7-7-20) N/A
7(1066-7-7-7-20) N/A
7(1066-7-7-7-20) N/A
8(7-7-7-20)
1.5
(7-7-7-20)
N/A
(1066-7-7-7-20)
N/A
7(1066-7-7-7-20) N/A
(7-7-7-20)
7
N/A
N/A
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
Side(s): SS - Single-sided DS - Double-sided
DIMM support:
• A*: Supports two (2) modules inserted into slot A1 and B1 as one pair of Dual-channel
memory configuration.
• B*: Supports three (3) modules inserted into the blue slots (A1, B1 and C1) as one
set of Triple-channel memory configuration.
• C*: Supports four (4) modules inserted into the blue slots (A1, B1 and C1) and the
black slot A2 as one set of Triple-channel memory configuration.
• D*: Supports six (6) modules inserted into both the blue slots and the black slots as
two set of Triple-channel memory configuration.
2-16
•
ASUS exclusively provides hyper DIMM support function.
•
Hyper DIMM support is subject to the physical characteristics of individual CPUs. Load
the X.M.P. or D.O.C.P. settings in the BIoS for the hyper DIMM support.
•
Visit the ASUS website for the latest QVL.
Chapter 2: Hardware information
2.4.3
Installing a DIMM
Ensure to unplug the power supply before adding or removing DIMMs or other system
components. Failure to do so may cause severe damage to both the motherboard and the
components.
2
To install a DIMM:
1.
2.
DIMM notch
Press the retaining clips outward to
unlock a DIMM socket.
Align a DIMM on the socket such that
the notch on the DIMM matches the
break on the socket.
1
Chapter 2
1
Unlocked retaining clip
A DIMM is keyed with a notch so that it fits in only one direction. DO NOT force a DIMM into
a socket to avoid damaging the DIMM.
3.
Firmly insert the DIMM into the socket
until the retaining clips snap back in
place and the DIMM is properly seated.
3
Locked Retaining Clip
2.4.4
Removing a DIMM
To remove a DIMM:
1.
2
Simultaneously press the retaining
clips outward to unlock the DIMM.
1
1
Support the DIMM lightly with your fingers when pressing the retaining clips. The DIMM
might get damaged when it flips out with extra force.
2.
Remove the DIMM from the socket.
ASUS P6X58D Premium
2-17
2.5
Expansion slots
In the future, you may need to install expansion cards. The following subsections describe the
slots and the expansion cards that they support.
Ensure to unplug the power cord before adding or removing expansion cards. Failure to do
so may cause you physical injury and damage motherboard components.
2.5.1
Installing an expansion card
To install an expansion card:
1.
2.
Chapter 2
3.
4.
5.
6.
Before installing the expansion card, read the documentation that came with it and
make the necessary hardware settings for the card.
Remove the system unit cover (if your motherboard is already installed in a chassis).
Remove the bracket opposite the slot that you intend to use. Keep the screw for later
use.
Align the card connector with the slot and press firmly until the card is completely
seated on the slot.
Secure the card to the chassis with the screw you removed earlier.
Replace the system cover.
2.5.2
Configuring an expansion card
After installing the expansion card, configure it by adjusting the software settings.
1.
2.
3.
Turn on the system and change the necessary BIOS settings, if any. See Chapter 3 for
information on BIOS setup.
Assign an IRQ to the card. Refer to the tables on the next page.
Install the software drivers for the expansion card.
When using PCI cards on shared slots, ensure that the drivers support “Share IRQ” or that
the cards do not need IRQ assignments. Otherwise, conflicts will arise between the two PCI
groups, making the system unstable and the card inoperable. Refer to the table on the next
page for details.
2-18
Chapter 2: Hardware information
2.5.3
Interrupt assignments
Standard interrupt assignments
Priority
0
1
Standard function
System Timer
1
2
Keyboard Controller
2
–
Redirect to IRQ#9
4
12
Communications Port (COM1)*
5
13
IRQ Holder for PCI Steering*
6
14
Floppy Disk Controller
7
15
Reserved
8
3
System CMOS/Real Time Clock
9
4
IRQ Holder for PCI Steering*
10
5
IRQ Holder for PCI Steering*
11
6
IRQ Holder for PCI Steering*
12
7
Reserved
13
8
Numeric Data Processor
14
9
Primary IDE Channel
Chapter 2
IRQ
* These IRQs are usually available for PCI devices.
IRQ assignments for this motherboard
IOH
NEC USB 3.0
Marvell 9123
PCIE16_1
PCIE16_2
ICH
PCIE16_3
PCIE1_1
LAN1 (8056)
LAN2 (8056)
Marvell 6111
Marvell SAS
PCI_1
PCI_2
USB_1
USB_2
USB_3
USB_4
USB_5
USB_6
USB 2.0_1
USB 2.0_2
SATA_1
SATA _2
Audio
ASUS P6X58D Premium
24
–
–
used
–
25
–
–
–
–
26
–
–
–
–
27
–
–
–
–
28
–
used
–
–
29
used
–
–
–
30
–
–
–
used
31
–
–
–
–
A
–
shared
–
–
shared
–
shared
–
–
–
–
shared
–
–
–
–
–
–
–
B
shared
–
–
shared
–
–
–
shared
–
–
–
–
–
–
–
–
–
–
–
C
–
–
shared
–
–
–
–
–
–
–
shared
–
–
–
–
shared
–
–
–
D
–
–
–
–
–
shared
–
–
–
shared
–
–
–
shared
–
–
–
–
–
E
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
shared
shared
–
F
–
–
–
–
–
–
–
–
–
–
–
–
used
–
–
–
–
–
–
G
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
used
H
–
–
–
–
–
–
–
–
shared
–
–
–
–
–
shared
–
–
–
–
2-19
2.5.4
PCI slots
The PCI slots support cards such as a LAN card, SCSI card, USB card, and other cards that
comply with PCI specifications. Refer to the figure below for the location of the slots.
2.5.5
PCI Express x1 slot
This motherboard supports PCI Express x1 network cards, SCSI cards and other cards that
comply with the PCI Express specifications. Refer to the figure below for the location of the
slots.
2.5.6
PCI Express 2.0 x16 slots
This motherboard has three PCI Express 2.0 x16 slots that support PCI Express x16 2.0
graphic cards complying with the PCI Express specifications. Refer to the figure below for the
location of the slots.
Chapter 2
PCIe 2.0 x16_3 slot (gray, at max. x8 link)
PCI slot 2
PCI slot 1
PCIe 2.0 x16_2 slot (blue, at max. x16 link)
PCIe 2.0 x16_1 slot (blue, at x16 link)
PCIe x1_1 slot
2-20
Chapter 2: Hardware information
PCI Express operating mode
PCIe x16_1
PCIe x16_2
PCIe x16_3
Single VGA/PCIe card
x16 (Recommend for
single VGA)
x16 (Single VGA)
N/A
Dual VGA/PCIe card
x16
x16
x1
x16
x16
x1
x16
x8
x8
Triple VGA/PCIe card
•
In single VGA card mode, use first the PCIe 2.0 x16_1 slot (blue) or PCIe 2.0 x16_2
slot (blue) for a PCI Express x16 graphics card to get better performance.
•
In CrossFireX™ or SLI™ mode, use the PCIe 2.0 x16_1 (blue) and PCIe 2.0 x16_2
(blue) slots for PCI Express x16 graphics cards to get better performance.
•
Use the three PCIe 2.0 x16 slots for 3-Way SLI or CrossFireX™ mode.
•
If you install a PCIe x16 graphics card on to the PCIe x16_1 slot, a PCIe device with
a bandwidth faster than x8 link to the PCIe x16_2 slot, and a PCIe device with a
bandwidth slower than x4 link to the PCIe x16_3 slot, the three PCIe x16 slots will
work at x16, x16, x1 link as the default.
•
If you install a PCIe x16 graphics card on to the PCIe x16_1 slot, a PCIe device with
a bandwidth slower than x8 link to the PCIe x16_2 slot, and a PCIe device with a
bandwidth faster than x4 link to the PCIe x16_3 slot, the three PCIe x16 slots will work
at x16, x8, x8 link as the default.
•
You may manually reassign the link width of PCIe x16_2 and PCIe x16_3 slots in
BIOS settings. See page 3-22 for details.
•
We recommend that you provide sufficient power when running
CrossFireX™ or SLI™ mode. See page 2-35 for details.
•
Connect a chassis fan to the motherboard connector labeled CHA_FAN1/2/3 when
using multiple graphics cards for better thermal environment. See page 2-33 for
details.
ASUS P6X58D Premium
Chapter 2
VGA configuration
2-21
2.6
Jumpers
CPU / DRAM Bus / QPI DRAM overvoltage setting
(3-pin OV_CPU, 3-pin OV_DRAM_BUS, 3-pin OV_QPI_DRAM)
These jumpers allow you to enable or disable the advanced CPU, DRAM Bus, and QPI
DRAM overvoltage settings in BIOS. Read the following information before you change the
jumper settings.
Chapter 2
2-22
OV_CPU
OV_DRAM_BUS
OV_QPI_DRAM
Pins 1-2 (Default)
up to 1.70V
up to 2.00V
up to 1.70V
Pins 2-3 (OV Enabled)
up to 2.10V
up to 2.46V
up to 1.90V
•
Before you change the jumper settings for extra-high overvoltage ability, use the BIOS
items first to adjust the desired CPU, DRAM, and QPI performance. Ensure that your
system functions well under the highest BIOS voltage settings before you change the
setting of these three jumpers.
•
DO NOT set the OV_CPU jumper to pins 2–3 when you install a new CPU and have
not booted for the first time. Doing so may cause the system to halt. For system failure
due to the wrong setting of the OV_CPU jumper, shut down the computer and move
the cap back to pins 1–2.
•
According to Intel CPU spec, DIMMs with voltage requirement over 1.65V may
damage the CPU permanently. We recommend you install the DIMMs with the voltage
requirement below 1.65V.
•
The system may need a better cooling system (for example, a water-cooling system)
to work stably under high voltage settings.
Chapter 2: Hardware information
2.7
Onboard switches
Onboard switches allow you to fine-tune performance when working on a bare or open-case
system. This is ideal for overclockers and gamers who continually change settings to enhance
system performance.
Power-on switch
The motherboard comes with a power-on switch that allows you to power up or wake
up the system. This switch also lights up when the system is plugged to a power source
indicating that you should shut down the system and unplug the power cable before
removing or plugging in any motherboard component. The illustration below shows the
location of the onboard power-on switch.
Chapter 2
1.
2.
Reset switch
Press the reset switch to reboot the system.
ASUS P6X58D Premium
2-23
3.
MemOK! switch
Installing DIMMs that are incompaible with the motherboard may cause system boot
failure, and the DRAM_LED near the MemOK! switch lights continuously. Press and
hold the MemOK! switch until the DRAM_LED starts blinking to begin automatic
memory compatibility tuning for successful boot.
Chapter 2
2-24
•
The DRAM_LED also lights when the DIMM is not properly installed. Turn off the
system and reinstall the DIMM before using the MemOK! function.
•
Pressing the MemOK! switch under Windows® OS environment will reboot the
computer and start the memory tuning.
•
During the tuning process, the system loads and tests failsafe memory settings. It
takes about 30 seconds for the system to test one set of failsafe settings. If the test
fails, the system reboots and test the next set of failsafe settings. The blinking speed
of the DRAM_LED increases, indicating different test processes.
•
Due to memory tuning requirement, the system automatically reboots when each
timing set is tested. If the installed DIMMs still fail to boot after the whole tuning
process, the DRAM_LED lights continuously. Replace the DIMMs with ones
recommended in the Memory QVL (Qualified Vendors Lists) in this user manual or on
the ASUS website at www.asus.com.
•
If you turn off the computer and replace DIMMs during the tuning process, the system
continues memory tuning after turning on the computer. To stop memory tuning, turn
off the computer and unplug the power cord for about 5–10 seconds.
•
If your system fail to boot due to BIOS overclocking, press the MemOK! switch to boot
and load BIOS default settings. A messgae will appear during POST reminding you
that the BIOS has been restored to its default settings.
•
We recommend that you download and update to the latest BIOS version from the
ASUS website at www.asus.com after using the MemOK! function.
Chapter 2: Hardware information
Connectors
2.8.1
Rear panel connectors
Chapter 2
2.8
Rear panel connectors
1.
PS/2 mouse port (green)
7.
Clear CMOS switch
2.
Coaxial S/PDIF Out port
8.
USB 3.0 ports 1 and 2
3.
LAN2 (RJ-45) port*
9.
Optical S/PDIF Out port
4.
IEEE 1394a port
10. USB 2.0 ports 3 and 4
5.
LAN1 (RJ-45) port*
11. USB 2.0 ports 1 and 2
6.
PS/2 keyboard port (purple)
12. Audio I/O ports**
*and **: Refer to the tables on the next page for LAN port and audio port definitions.
Press the Clear CMOS switch to clear BIOS setup information only when the system hangs
due to overclocking.
ASUS P6X58D Premium
2-25
* LAN port LED indications
ACT/LINK SPEED
LED
LED
Activity Link LED
Speed LED
Status
Description
Status
Description
OFF
No link
OFF
10 Mbps connection
ORANGE
Linked
ORANGE
100 Mbps connection
BLINKING
Data activity
GREEN
1 Gbps connection
LAN port
** Audio 2, 4, 6, or 8-channel configuration
Port
Headset
2-channel
4-channel
6-channel
8-channel
Chapter 2
Light Blue
Line In
Line In
Line In
Line In
Lime
Line Out
Front Speaker Out
Front Speaker Out
Front Speaker Out
Pink
Mic In
Mic In
Mic In
Mic In
Orange
–
–
Center/Subwoofer
Center/Subwoofer
Black
–
Rear Speaker Out
Rear Speaker Out
Rear Speaker Out
Gray
–
–
–
Side Speaker Out
2.8.2
Audio I/O connections
Audio I/O ports
Connect to Headphone and Mic
2-26
Chapter 2: Hardware information
Connect to Stereo Speakers
Chapter 2
Connect to 2.1 channel Speakers
Connect to 4.1 channel Speakers
ASUS P6X58D Premium
2-27
Connect to 5.1 channel Speakers
Chapter 2
Connect to 7.1 channel Speakers
2-28
Chapter 2: Hardware information
2.8.3
1.
Internal connectors
ICH10R Serial ATA connectors (7-pin SATA 1–6 [blue])
These connectors are for the Serial ATA signal cables for Serial ATA hard disk drives
and optical disc drives.
Chapter 2
If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10
configuration with the Intel® Matrix Storage Technology through the onboard Intel®
ICH10R RAID controller.
•
These connectors are set to Standard IDE mode by default. In Standard IDE mode,
you can connect Serial ATA boot/data hard disk drives to these connectors. If you
intend to create a Serial ATA RAID set using these connectors, set the Configure
SATA as item in the BIOS to [RAID]. See section 3.4.2 Storage Configuration for
details.
•
Before creating a RAID set, refer to section 4.4 RAID configurations or the manual
bundled in the motherboard support DVD.
•
You must install Windows® XP Service Pack 2 or later version before using Serial
ATA hard disk drives. The Serial ATA RAID feature is available only if you are using
Windows® XP SP 2 or later version.
•
When using hot-plug and NCQ, set the Configure SATA as in the BIOS to [AHCI].
See section 3.4.2 Storage Configuration for details.
ASUS P6X58D Premium
2-29
2.
Marvell® Serial ATA 6.0 Gb/s connectors
(7-pin SATA_6G_1, 7-pin SATA_6G_2 [gray])
These connectors are for the Serial ATA 6.0 Gb/s signal cables for Serial ATA 6.0 Gb/s
hard disk drives.
Chapter 2
2-30
•
These connectors are set to Standard IDE mode by default. In Standard IDE mode,
you can connect Serial ATA data hard disk drives to these connectors.
•
You must install Windows® XP Service Pack 2 or later versions before using Serial ATA
hard disk drives.
•
When using hot-plug and NCQ, set the Marvell 9123 Controller item in the BIOS to
[AHCI Mode]. Refer to section 3.6.3 Onboard Devices Configuration for details.
Chapter 2: Hardware information
USB connectors (10-1 pin USB56; USB78)
These connectors are for USB 2.0 ports. Connect the USB module cable to any of
these connectors, then install the module to a slot opening at the back of the system
chassis. These USB connectors comply with USB 2.0 specification that supports up to
480 Mbps connection speed.
Chapter 2
3.
Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard!
You can connect the front panel USB cable to the ASUS Q-Connector (USB, blue) first, and
then install the Q-Connector (USB) to the USB connector onboard if your chassis supports
front panel USB ports.
The USB module cable is purchased separately.
ASUS P6X58D Premium
2-31
4.
IEEE 1394a port connector (10-1 pin IE1394_2)
This connector is for an IEEE 1394a port. Connect the IEEE 1394a module cable
to this connector, then install the module to a slot opening at the back of the system
chassis.
Chapter 2
Never connect a USB cable to the IEEE 1394a connector. Doing so will damage the
motherboard!
The IEEE 1394a module cable is purchased separately.
5.
2-32
Optical drive audio connector (4-pin CD)
These connectors allow you to receive stereo audio input from sound sources such as
a CD-ROM, TV tuner, or MPEG card.
Chapter 2: Hardware information
6.
CPU, chassis, and power fan connectors
(4-pin CPU_FAN; 4-pin CHA_FAN1; 3-pin CHA_FAN2–3; 3-pin PWR_FAN)
Chapter 2
Connect the fan cables to the fan connectors on the motherboard, ensuring that the
black wire of each cable matches the ground pin of the connector.
Do not forget to connect the fan cables to the fan connectors. Insufficient air flow inside the
system may damage the motherboard components. These are not jumpers! Do not place
jumper caps on the fan connectors!
•
The CPU_FAN connector supports the CPU fan of maximum 2A (24 W) fan power.
•
Only the CPU_FAN, CHA_FAN 1, CHA_FAN 2 and CHA_FAN 3 connectors support
the ASUS Fan Xpert feature.
•
If you install two VGA cards, we recommend that you plug the rear chassis fan cable
to the motherboard connector labeled CHA_FAN1/2/3 for better thermal environment.
ASUS P6X58D Premium
2-33
7.
Digital audio connector (4-1 pin SPDIF_OUT)
This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port. Connect
the S/PDIF Out module cable to this connector, then install the module to a slot opening
at the back of the system chassis.
Chapter 2
The S/PDIF module is purchased separately.
8.
2-34
Front panel audio connector (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module that supports
either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel
audio I/O module cable to this connector.
•
We recommend that you connect a high-definition front panel audio module to this
connector to avail of the motherboard’s high-definition audio capability.
•
If you want to connect a high-definition front panel audio module to this connector, set
the Front Panel Type item in the BIOS setup to [HD Audio]; if you want to connect an
AC'97 front panel audio module to this connector, set the item to [AC97]. By default,
this connector is set to [HD Audio].
Chapter 2: Hardware information
ATX power connectors (24-pin EATXPWR; 8-pin EATX12V)
These connectors are for ATX power supply plugs. The power supply plugs are
designed to fit these connectors in only one orientation. Find the proper orientation and
push down firmly until the connectors completely fit.
•
For a fully configured system, we recommend that you use a power supply unit
(PSU) that complies with ATX 12 V Specification 2.0 (or later version) and provides a
minimum power of 350 W.
•
Do not forget to connect the 8-pin EATX12 V power plug; otherwise, the system will
not boot.
•
We recommend that you use a PSU with higher power output when configuring a
system with more power-consuming devices. The system may become unstable or
may not boot up if the power is inadequate.
•
If you want to use two or more high-end PCI Express x16 cards, use a PSU with
1000W power or above to ensure the system stability.
•
If you are uncertain about the minimum power supply requirement for your system,
refer to the Recommended Power Supply Wattage Calculator at http://support.asus.
com/PowerSupplyCalculator/PSCalculator.aspx?SLanguage=en-us for details.
PSU suggested list:
Seventeam ST-522HLP
Seventeam ST550EAJ-05F
Antec SG-850
ASUS P-50GA
ASUS U-75HA
Be quiet P6-PRO-850W
Be quiet BN077
CoolerMaster RS-850EMBA
Corsair CMPSU-620HX
EnerMAX EGX1000EWL
HECHUAN ST-ATX330
HUNTKEY 磐石500
Be quiet P6-PRO-850W
ASUS P6X58D Premium
OCZ OCZGXS850
OCZ OCZ1000PXS
Seasonic SS-850EM
Silverstone SST-ST85F
Tagan TG1100-U33
Thermaltake W0132RE
Thermaltake W0133RU
Aelta GPS-550AB
Antec EA-380
OCZ OCZ780MXS
Seasonic SS-351HT
Seasonic SS-460HS
Seasonic SS-500GB
Chapter 2
9.
Seasonic SS-500HM
Seasonic SS-550HT
Seasonic SS-600HT
Seventeam ST-420BKP
Snake PSH500V
Silverstone SST-ST50EF
Silverstone PSU ST56ZF
T.C.STAR D420
Thermaltake TWV500W-AP
Thermaltake PUREPower-600AP
Zalman ZM600-HP
Zippy HP2-6500PE (G1)
Zippy PSL6720P
2-35
10. System panel connector (20-8 pin PANEL)
Chapter 2
•
2-36
This connector supports several chassis-mounted functions.
System power LED (2-pin PLED)
This 2-pin connector is for the system power LED. Connect the chassis power LED
cable to this connector. The system power LED lights up when you turn on the system
power, and blinks when the system is in sleep mode.
•
Hard disk drive activity LED (2-pin IDE_LED)
•
System warning speaker (4-pin SPEAKER)
•
ATX power button/soft-off button (2-pin PWRSW)
•
Reset button (2-pin RESET)
This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity LED cable
to this connector. The IDE LED lights up or flashes when data is read from or written to
the HDD.
This 4-pin connector is for the chassis-mounted system warning speaker. The speaker
allows you to hear system beeps and warnings.
This connector is for the system power button. Pressing the power button turns the
system on or puts the system in sleep or soft-off mode depending on the BIOS settings.
Pressing the power switch for more than four seconds while the system is ON turns the
system OFF.
This 2-pin connector is for the chassis-mounted reset button for system reboot without
turning off the system power.
Chapter 2: Hardware information
2.8.4
ASUS Q-Connector (system panel)
Use the ASUS Q-Connector to connect/disconnect the chassis front panel cables.
To install the ASUS Q-Connector:
Connect the front panel cables to the ASUS
Q-Connector.
Refer to the labels on the Q-Connector to
know the detailed pin definitions, and then
match them to their respective front panel
cable labels.
The labels on the front panel cables
may vary depending on the chassis
model.
2.
Install the ASUS Q-Connector to the system
panel connector, ensuring the orientation
matches the labels on the motherboard.
3.
The front panel functions are now enabled.
The figure shows the Q-Connector is properly
installed on the motherboard.
ASUS P6X58D Premium
IDE_LED+
IDE_LED-
PWR
Ground
Reset
Ground
IDE_LED
R SW
POWE
RESET
SW
Chapter 2
1.
2-37
2.9
Starting up for the first time
1.
After making all the connections, replace the system case cover.
3.
Connect the power cord to the power connector at the back of the system chassis.
2.
4.
5.
6.
Chapter 2
7.
Be sure that all switches are off.
Connect the power cord to a power outlet that is equipped with a surge protector.
Turn on the devices in the following order:
a.
Monitor
c.
System power
b.
External SCSI devices (starting with the last device on the chain)
After applying power, the system power LED on the system front panel case lights up.
For systems with ATX power supplies, the system LED lights up when you press the
ATX power button. If your monitor complies with the “green” standards or if it has a
“power standby” feature, the monitor LED may light up or change from orange to green
after the system LED turns on.
The system then runs the power-on self tests or POST. While the tests are running, the
BIOS beeps (see the BIOS beep codes table below) or additional messages appear on
the screen. If you do not see anything within 30 seconds from the time you turned on
the power, the system may have failed a power-on test. Check the jumper settings and
connections or call your retailer for assistance.
BIOS Beep
Description
One short beep
VGA detected
Quick boot set to disabled
No keyboard detected
One continuous beep followed by two short
beeps then a pause (repeated)
No memory detected
One continuous beep followed by three short
beeps
No VGA detected
One continuous beep followed by four short
beeps
Hardware component failure
At power on, hold down the <Delete> key to enter the BIOS Setup. Follow the
instructions in Chapter 3.
2.10 Turning off the computer
While the system is ON, pressing the power switch for less than four seconds puts the system
on sleep mode or soft-off mode, depending on the BIOS setting. Pressing the power switch
for more than four seconds lets the system enter the soft-off mode regardless of the BIOS
setting. Refer to section 3.7 Power menu in Chapter 3 for details.
2-38
Chapter 2: Hardware information
Chapter 3
Chapter 3:
3.1
BIOS setup
Knowing BIOS
BIOS (Basic Input and Output System) stores system hardware settings such as storage
device configuration, overclocking settings, advanced power management, and boot device
configuration that are needed for system startup in the motherboard CMOS. In normal
circumstances, the default BIOS settings apply to most conditions to ensure optimum
performance. We recommend that you not change the default BIOS settings except in
the following circumstances:
•
•
An error message appears on the screen during the system bootup and requests you to
run the BIOS Setup.
You have installed a new system component that requires further BIOS settings or
update.
Inappropriate settings of the BIOS may result to instability or failure to boot. We strongly
recommend that you change the BIOS settings only with the help of a trained service
personnel.
3.2
Updating BIOS
The ASUS website publishes the latest BIOS versions to provide enhancements on system
stability, compatibility, or performance. However, BIOS updating is potentially risky. If there
is no problem using the current version of BIOS, DO NOT manually update the BIOS.
Inappropriate BIOS updating may result in the system’s failure to boot. Carefully follow the
instructions of this chapter to update your BIOS if necessary.
Chapter 3
Visit the ASUS website (www.asus.com) to download the latest BIOS file for this
motherboard.
The following utilities allow you to manage and update the motherboard BIOS setup program.
1.
ASUS Update: Updates the BIOS in Windows® environment.
3.
ASUS CrashFree BIOS 3 utility: Restores the BIOS using the motherboard support
DVD or a USB flash drive when the BIOS file fails or gets corrupted.
2.
ASUS EZ Flash 2: Updates the BIOS using a USB flash drive.
Refer to the corresponding sections for details on these utilities.
Save a copy of the original motherboard BIOS file to a USB flash disk in case you need
to restore the BIOS in the future. Copy the original motherboard BIOS using the ASUS
Update utility.
ASUS P6X58D Premium
3-1
3.2.1
ASUS Update utility
The ASUS Update is a utility that allows you to manage, save, and update the motherboard
BIOS in Windows® environment. The ASUS Update utility allows you to:
•
Save the current BIOS file
•
Update the BIOS from an updated BIOS file
•
•
•
Download the latest BIOS file from the Internet
Update the BIOS directly from the Internet
View the BIOS version information
This utility is available in the support DVD that comes with the motherboard package.
ASUS Update requires an Internet connection either through a network or an Internet
Service Provider (ISP).
Installing ASUS Update
To install ASUS Update:
1.
Place the support DVD in the optical drive.
3.
The ASUS Update utility is copied to your system.
2.
From the Main menu, click the Utilities tab, then click Install ASUS Update VX.XX.XX.
Quit all Windows® applications before you update the BIOS using this utility.
Updating the BIOS through the Internet
Chapter 3
To update the BIOS through the Internet:
1.
3-2
From the Windows® desktop, click
Start > Programs > ASUS >
ASUSUpdate > ASUSUpdate. The
ASUS Update main window appears.
2.
Select Update BIOS from the
Internet from the drop‑down menu,
and then click Next.
Chapter 3: BIOS setup
3.
Select the ASUS FTP site nearest
you to avoid network traffic, or click
Auto Select. Click Next.
4.
From the FTP site, select the BIOS
version that you wish to download. Click
Next.
5.
Follow the onscreen instructions to complete the update process.
The ASUS Update utility is capable of updating itself through the Internet. Always update
the utility to avail all its features.
Updating the BIOS through a BIOS file
To update the BIOS through a BIOS file:
2.
Fom the Windows® desktop, click
Start > Programs > ASUS >
ASUSUpdate > ASUSUpdate. The
ASUS Update main window appears.
Select Update BIOS from a file
from the dropdown menu, then click
Next.
3.
4.
Locate the BIOS file from the Open
window, then click Open.
Chapter 3
1.
Follow the onscreen instructions to
complete the update process.
P6X58DPM.ROM
P6X58DPM
Ensure to load the BIOS default
settings to ensure system
compatibility and stability. Select the
Load Setup Defaults item under
the Exit menu. See section 3.10 Exit
Menu for details.
ASUS P6X58D Premium
3-3
3.2.2
ASUS EZ Flash 2 utility
The ASUS EZ Flash 2 feature allows you to update the BIOS without having to use a
bootable floppy disk or an OS‑based utility.
Before you start using this utility, download the latest BIOS from the ASUS website
at www.asus.com.
To update the BIOS using EZ Flash 2:
1.
Insert the USB flash disk that contains the latest BIOS file to the USB port, and then
launch EZ Flash 2 in any of these two ways:
•
•
Press <Alt> + <F2> during POST to display the following.
Enter the BIOS setup program. Go to the Tools menu to select EZ Flash 2 and
press <Enter> to enable it.
ASUSTek EZ Flash 2 BIOS ROM Utility V3.44
FLASH TYPE: MXIC 25L1605A
Current ROM
BOARD: P6X58D PREMIUM
VER: 0216
DATE: 10/16/2009
Update ROM
BOARD: Unknown
VER: Unknown
DATE: Unknown
PATH: A:\
A:
Chapter 3
Note
[Enter] Select or Load
[Up/Down/Home/End] Move
2.
[Tab] Switch
[B] Backup
[V] Drive Info
[Esc] Exit
Press <Tab> to switch between drives until the correct BIOS file is found. When
the correct BIOS file is found, EZ Flash 2 performs the BIOS update process and
automatically reboots the system when done.
•
This function can support devices such as a USB flash disk with FAT 32/16 format and
single partition only.
•
DO NOT shut down or reset the system while updating the BIOS to prevent system
boot failure!
Ensure to load the BIOS default settings to ensure system compatibility and stability. Select
the Load Setup Defaults item under the Exit menu. See section 3.10 Exit Menu for
details.
3-4
Chapter 3: BIOS setup
3.2.3
ASUS CrashFree BIOS 3 utility
The ASUS CrashFree BIOS 3 utility is an auto recovery tool that allows you to restore the
BIOS file when it fails or gets corrupted during the updating process. You can restore a
corrupted BIOS file using the motherboard support DVD or a USB flash drive that contains
the BIOS file.
The BIOS file in the motherboard support DVD may be older than the BIOS file published
on the ASUS official website. If you want to use the newer BIOS file, download the file at
support.asus.com and save it to a USB flash drive.
Recovering the BIOS
To recover the BIOS:
1.
2.
3.
4.
5.
Turn on the system.
Insert the motherboard support DVD to the optical drive, or the USB flash drive
containing the BIOS file to the USB port.
The utility automatically checks the devices for the BIOS file. When found, the utility
reads the BIOS file and starts flashing the corrupted BIOS file.
Turn off the system after the utility completes the updating process and power on
again.
The system requires you to enter BIOS Setup to recover BIOS setting. To ensure
system compatibility and stability, we recommend that you press <F2> to load default
BIOS values.
Chapter 3
DO NOT shut down or reset the system while updating the BIOS! Doing so can cause
system boot failure!
ASUS P6X58D Premium
3-5
3.3
BIOS setup program
A BIOS Setup program is provided for BIOS item modification. When you start up the
computer, the system provides you with the opportunity to run this program. Press <Del>
during the Power-On Self-Test (POST) to enter the Setup utility. Otherwise, POST continues
with its test routines.
If you wish to enter Setup after POST, restart the system by pressing <Ctrl> + <Alt> + <Delete>,
or by pressing the reset button on the system chassis. You can also restart by turning the
system off and then back on. Do this last option only if the first two failed.
The Setup program is designed to make it as easy to use as possible. Being a menu-driven
program, it lets you scroll through the various submenus and select from the available options
using the navigation keys.
•
The BIOS setup screens shown in this section are for reference purposes only, and
may not exactly match what you see on your screen.
•
If the system becomes unstable after changing any BIOS setting, load the default
settings to ensure system compatibility and stability. Select the Load Setup Defaults
item under the Exit menu. See section 3.10 Exit Menu for details.
•
3.3.1
If the system fails to boot after changing any BIOS setting, try to clear the CMOS and
reset the motherboard to the default value. See section 2.7.1 Rear panel connectors
for information on how to erase the RTC RAM.
BIOS menu screen
Menu items
Main
Menu bar
Ai Tweaker
System Time
System Date
Language
Chapter 3
SATA1
SATA2
SATA3
SATA4
SATA5
SATA6
Configuration fields
BIOS SETUP UTILITY
Advanced
Power
Boot
General help
Tools
Exit
[13:51:25]
[Fri 10/23/2009]
[English]
Use [ENTER], [TAB]
or [SHIFT-TAB] to
select a field.
[HDT722516DLA380]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
Use [+] or [-] to
configure system Date.
Storage Configuration
System Information
←→
↑↓
+Tab
F1
F10
ESC
Select Screen
Select Item
Change Field
Select Field
General Help
Save and Exit
Exit
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
Submenu items
3.3.2
Navigation keys
Menu bar
The menu bar on top of the screen has the following main items:
3-6
Main
For changing the basic system configuration
Ai Tweaker
For changing the overclocking settings
Advanced
For changing the advanced system settings
Power
For changing the advanced power management (APM) configuration
Boot
For changing the system boot configuration
Tools
For configuring options for special functions
Exit
For selecting the exit options and loading default settings
Chapter 3: BIOS setup
3.3.3
Navigation keys
At the bottom right corner of a menu screen are the navigation keys for that particular menu.
Use the navigation keys to select items in the menu and change the settings.
The navigation keys may differ from one screen to another.
3.3.4
Menu items
The highlighted item on the menu bar displays the specific items for that menu. For example,
selecting Main shows the Main menu items.
The other items (Ai Tweaker, Advanced, Power, Boot, Tools, and Exit) on the menu bar have
their respective menu items.
3.3.5
Submenu items
A solid triangle before each item on any menu screen means that the item has a submenu. To
display the submenu, select the item and press <Enter>.
3.3.6
Configuration fields
These fields show the values for the menu items. If an item is user-configurable, you can
change the value of the field opposite the item. You cannot select an item that is not
user-configurable.
A configurable field is enclosed in brackets, and is highlighted when selected. To change the
value of a field, select it and press <Enter> to display a list of options. Refer to 3.3.7 Pop-up
window.
Pop-up window
Select a menu item and press <Enter> to
display a pop-up window with the configuration
options for that item.
3.3.8
BIOS SETUP UTILITY
Advanced
Power
Boot
Ai Tweaker
Suspend Mode
ACPI Version Features
ACPI APIC support
Tools
Exit
Use [ENTER], [TAB] or
[SHIFT-TAB] to select
a field.
[Auto]
[Disabled]
[Enabled]
Disabled
Enabled
Use [+] or [-] to
configure system Time.
APM Configuration
Hardware Monitor
Scroll bar
A scroll bar appears on the right side of a
menu screen when there are items that do not
fit on the screen. Press the Up/Down arrow
keys or <Page Up> / <Page Down> keys to
display the other items on the screen.
3.3.9
Main
Chapter 3
3.3.7
←→
↑↓
+-
Tab
F1
F10
ESC
Select Screen
Select Item
Change Field
Select Field
General Help
Save and Exit
Exit
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
Scroll bar
Pop-up window
General help
At the top right corner of the menu screen is a brief description of the selected item.
ASUS P6X58D Premium
3-7
3.4
Main menu
When you enter the BIOS Setup program, the Main menu screen appears, giving you an
overview of the basic system information. Select an item and press <Enter> to display the
submenu.
Refer to section 3.3.1 BIOS menu screen for information on the menu screen items and
how to navigate through them.
Main
Ai Tweaker
System Time
System Date
Language
SATA1
SATA2
SATA3
SATA4
SATA5
SATA6
BIOS SETUP UTILITY
Advanced
Power
Boot
Tools
Exit
[13:51:25]
[Fri 10/23/2009]
[English]
Use [ENTER], [TAB]
or [SHIFT-TAB] to
select a field.
[HDT722516DLA380]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
Use [+] or [-] to
configure system Date.
←→
↑↓
+Tab
F1
F10
ESC
Storage Configuration
System Information
Select Screen
Select Item
Change Field
Select Field
General Help
Save and Exit
Exit
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
3.4.1
SATA 1–6
Chapter 3
While entering Setup, the BIOS automatically detects the presence of SATA devices. There
is a separate submenu for each SATA device. Select a device item and press <Enter> to
display the SATA device information.
Main
BIOS SETUP UTILITY
SATA 1
Device
: Hard Disk
Vendor
: HDT722516DLA380
Size
: 164.7GB
LBA Mode
: Supported
Block Mode
: 16Sectors
PIO Mode
: 4
Async DMA
: MultiWord DMA-2
Ultra DMA
: Ultra DMA-6
SMART Monitoring:Supported
Type [Auto]
LBA/Large Mode [Auto]
Block(Multi-sector Transfer)M
[Auto]
PIO Mode [Auto]
DMA Mode [Auto]
SMART Monitoring [Auto]
32Bit Data Transfer [Enabled]
Select the type
of device connected
to the system.
←→
↑↓
+F1
F10
ESC
Select Screen
Select Item
Change Field
General Help
Save and Exit
Exit
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
The BIOS automatically detects the values opposite the dimmed items (Device, Vendor, Size,
LBA Mode, Block Mode, PIO Mode, Async DMA, Ultra DMA, and SMART Monitoring). These
values are not user-configurable. These items show N/A if no SATA device is installed in the
system.
3-8
Chapter 3: BIOS setup
Type [Auto]
Allows you to select the type of device installed.
[Not Installed]
[Auto]
[CDROM]
[ARMD]
Select this option if no device is installed.
Allows automatic selection of the appropriate device type.
Select this option if you are specifically configuring a CD-ROM drive.
Select [ARMD] (ATAPI Removable Media Device) if your device is either a
ZIP, LS-120, or MO drive.
LBA/Large Mode [Auto]
[Auto]
[Disabled]
Select [Auto] to enable the LBA mode (Logical Block Addressing mode)
if the device supports this mode, and if the device was not previously
formatted with LBA mode disabled.
Disables this function.
Block (Multi-Sector Transfer) M [Auto]
[Auto]
[Disabled]
When set to [Auto], the data transfer from and to the device occurs in
multiple sectors at a time if the device supports multi-sector transfer feature.
When set to [Disabled], the data transfer from and to the device occurs one
sector at a time.
PIO Mode [Auto]
[Auto]Allows automatic selection of the PIO (Programmed input/output) modes,
which correspond to different data transfer rates.
[0] [1] [2] [3] [4]Sets the PIO mode to Mode 0, 1, 2, 3, or 4.
DMA Mode [Auto]
Chapter 3
DMA (Direct Memory Access) allows your computer to transfer data to and from the hardware
devices installed with much less CPU overhead.
The DMA mode consists of SDMA (single-word DMA), MDMA (multi-word DMA), and UDMA
(Ultra DMA). Setting to [Auto] allows automatic selection of the DMA mode.
SMART Monitoring [Auto]
[Auto]Allows automatic selection of the S.M.A.R.T (Smart Monitoring, Analysis,
and Reporting Technology).
[Enabled]Enables the S.M.A.R.T feature.
[Disabled]Disables the S.M.A.R.T feature.
32Bit Data Transfer [Enabled]
[Enabled]Sets the controller to combine two 16-bit reads from the hard disk into
a single 32-bit double word transfer to the processor. This makes more
efficient use of the PCI bus as fewer transactions are needed for the
transfer of a particular amount of data.
[Disabled]Disables this function.
ASUS P6X58D Premium
3-9
3.4.2
Storage Configuration
The Storage Configuration menu allows you to configure your storage devices. Select an item
then press <Enter> to display the submenu.
BIOS SETUP UTILITY
Main
Storage Configuration
SATA Configuration
Configure SATA as
[Enhanced]
[IDE]
Hard Disk Write Protect
SATA Detect Time Out (Sec)
[Disabled]
[35]
SATA Configuration [Enhanced]
Configuration options: [Disabled] [Compatible] [Enhanced]
Configure SATA as [IDE]
Allows you to set the SATA configuration. This item appears only when you set the
SATA Configuration item to [Enhanced] or [Compatible].
[IDE]
[RAID]
[AHCI]
Set to [IDE] when you want to use the Serial ATA hard disk drives as
Parallel ATA physical storage devices.
Set to [RAID] when you want to create a RAID configuration from the SATA
hard disk drives.
Set to [AHCI] when you want the SATA hard disk drives to use the AHCI
(Advanced Host Controller Interface). The AHCI allows the onboard
storage driver to enable advanced Serial ATA features that increases
storage performance on random workloads by allowing the drive to
internally optimize the order of commands.
Chapter 3
Hard Disk Write Protect [Disabled]
[Enabled]
[Disabled]
Enables device write protection. This function will be effective only if the
device is accessed through BIOS.
Disables this function.
SATA Detect Time Out (Sec) [35]
Selects the time out value for detecting ATA/ATAPI devices from the following options: [0] [5]
[10] [15] [20] [25] [30] [35]
3-10
Chapter 3: BIOS setup
3.4.3
AHCI Configuration
This menu is the section for AHCI configuration. It appears only when you set the item
Configure SATA as from the submenu of SATA Configuration to [AHCI].
BIOS SETUP UTILITY
Main
AHCI Settings
AHCI CD/DVD Boot Time out
AHCI
AHCI
AHCI
AHCI
AHCI
AHCI
Port1
Port2
Port3
Port4
Port5
Port6
[Not
[Not
[Not
[Not
[Not
[Not
[35]
Some SATA CD/DVD in
AHCI mode need to
wait ready longer.
Detected]
Detected]
Detected]
Detected]
Detected]
Detected]
AHCI CD/DVD Boot Time out [35]
Selects the boot time out value for SATA CD/DVD devices in AHCI mode from the following
options: [0] [5] [10] [15] [20] [25] [30] [35]
SATA Port1-6 [XXXX]
Displays the status of auto-detection of SATA devices.
SATA Port1-6 [Auto]
[Auto]Allows automatic selection of the device type connected to the
system.
[Not Installed]
Selects this option if no SATA devices are installed.
SMART Monitoring [Enabled]
S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitor system.
When read/write of your hard disk errors occur, this feature allows the hard disk to
report warning messages during the POST.
3.4.4
Enables the SMART monitoring feature.
Disables the SMART monitoring feature.
Chapter 3
[Enabled]
[Disabled]
System Information
This menu gives you an overview of the general system specifications. The BIOS automatically
detects the BIOS information, CPU specification, and system memory in this menu.
BIOS SETUP UTILITY
Main
BIOS Information
Version
: 0216
Build Date: 10/16/09
MVL9123 FW Version: 01001014
Processor
Type
: Genuine Intel(R) CPU 000 @ 3.20GHz
Speed
: 3200MHz
System Memory
Usable Size
: 1016MB
ASUS P6X58D Premium
3-11
3.5
Ai Tweaker menu
The Ai Tweaker menu items allow you to configure overclocking-related items.
Be cautious when changing the settings of the Ai Tweaker menu items. Incorrect field
values can cause the system to malfunction.
The configuration options for this chapter vary depending on the CPU and DIMM model you
installed on the motherboard.
Main
Ai Tweaker
BIOS SETUP UTILITY
Advanced
Power
Boot
Tools
Configure System Performance Settings
Ai Overclock Tuner
CPU Ratio Setting
Intel(R) SpeedStep(TM) Tech
Intel(R) TurboMode Tech
Xtreme Phase Full Power Mode
DRAM Frequency
UCLK Frequency
QPI Link Data Rate
[Auto]
[Auto]
[Enabled]
[Enabled]
[Auto]
[Auto]
[Auto]
[Auto]
DRAM Timing Control
******* Please key in numbers directly! *******
CPU Voltage Control
[Manual]
CPU Voltage
[Auto]
CPU PLL Voltage
[Auto]
QPI/DRAM Core Voltage
[Auto]
IOH Voltage
[Auto]
Exit
[D.O.C.P]
It’s designed to
overclock DRAM
frequency by adjusting
BCLK frequency.
[X.M.P.]
When X.M.P. is enabled
BLCK frequency,
CPU ratio and memory
parameters will be
auto optimized.
←→
↑↓
+F1
F10
ESC
Select Screen
Select Item
Change Option
General Help
Save and Exit
Exit
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
Scroll down to display the following items:
Chapter 3
IOH PCIE Voltage
[Auto]
ICH Voltage
[Auto]
ICH PCIE Voltage
[Auto]
DRAM Bus Voltage
[Auto]
DRAM DATA REF Voltage on CHA [Auto]
DRAM CTRL REF Voltage on CHA [Auto]
DRAM DATA REF Voltage on CHB [Auto]
DRAM CTRL REF Voltage on CHB [Auto]
DRAM DATA REF Voltage on CHC [Auto]
DRAM CTRL REF Voltage on CHC [Auto]
*************************************************
Load-Line Calibration
[Auto]
CPU Differential Amplitude
[Auto]
CPU Clock Skew
[Auto]
CPU Spread Spectrum
[Auto]
IOH Clock Skew
[Auto]
PCIE Spread Spectrum
[Auto]
←→
↑↓
+F1
F10
ESC
Select Screen
Select Item
Change Option
General Help
Save and Exit
Exit
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
3.5.1
Ai Overclock Tuner [Auto]
Allows you to select the CPU overclocking options to achieve the desired CPU internal
frequency. Select any of these preset overclocking configuration options:
3-12
Manual
Allows you to individually set overclocking parameters.
Auto
Loads the optimal settings for the system.
D.O.C.P
Overclocks DRAM frequency by adjusting BCLK frequency.
X.M.P.
If you install memory modules supporting the eXtreme Memory Profile
(X.M.P.) Technology, choose this item to set the profiles supported by
your memory modules for optimizing the system performance.
Chapter 3: BIOS setup
The configuration options for the following sub-items vary depending on the DIMMs you
install on the motherboard.
DRAM O.C. Profile [DDR3-1805MHz]
This item appears only when you set the Ai Overclock Tuner item to [D.O.C.P.] and allows
you to select a DRAM O.C. profile, which applies different settings to DRAM frequency,
DRAM timing and DRAM voltage. Configuration options: [DDR3-1805MHz] [DDR3-2006MHz]
eXtreme Memory Profile [Disabled]
This item appears only when you set the Ai Overclock Tuner item to [X.M.P.] and allows you
to select the X.M.P. mode supported by your memory module.
[Disabled]
[High Performance]
[High Frequency]
You are not allowed to select the memory profile.
Allows your memory to work in high performance.
Allows your memory to work in high frequency.
To obtain the best performance of the X.M.P. DIMM or 1600MHz DIMM, install only one
DIMM on each memory channel.
3.5.2
CPU Ratio Setting [Auto]
Allows you to set the ratio between the CPU Core Clock and the BCLK Frequency. Use <+>
and <-> keys to adjust the ratio. The valid value ranges vary according to your CPU model.
[Enabled]
[Disabled]
3.5.4
[Enabled]
[Disabled]
3.5.5
[Auto]
[Enabled]
Intel(R) SpeedStep(TM) Tech [Enabled]
The CPU speed is controlled by the operating system.
The CPU runs at its default speed.
Chapter 3
3.5.3
Intel(R) TurboMode Tech [Enabled]
Allows processor cores to run faster than marked frequency in specific
condition.
Disables this function.
Xtreme Phase Full Power Mode [Auto]
Automatic configuration.
Enables Full Power Mode to ensure the best CPU overclocking performance.
The following two items appear only when you set the Ai Overclock Tuner item to
[Manual], [D.O.C.P.] or [X.M.P.].
3.5.6
BCLK Frequency [XXX]
Allows you to adjust the CPU operating frequency to enhance the system performance. Use
the <+> and <-> keys to adjust the value. You can also key in the desired value using the
numeric keypad. The values range from 100 to 500.
ASUS P6X58D Premium
3-13
3.5.7
PCIE Frequency [XXX]
Allows you to set the PCI Express frequency. Use the <+> and <-> keys to adjust the PCIE
frequency. You can also key in the desired value using the numeric keypad. The values range
from 100 to 200.
3.5.8
DRAM Frequency [Auto]
Allows you to set the DDR3 operating frequency. The configuration options vary with the
BCLK Frequency item settings.
Selecting a very high DRAM frequency may cause the system to become unstable! If this
happens, revert to the default setting.
3.5.9
UCLK Frequency [XXX]
Allows you to set the CPU Uncore frequency to increase the transmission bandwidth
between the memoy controller and memory modules. The configuration options vary with the
DRAM Frequency item settings.
3.5.10
QPI Link Data Rate [Auto]
Allows you to set the QuickPath Interconnect (QPI) frequency to enhance the system
performance. Configuration options: [Auto] [4728MT/s] [5778MT/s] [6304MT/s]
3.5.11
DRAM Timing Control [Auto]
The items in this menu allow you to set the DRAM timing control features.
Chapter 3
The configuration options for some of the following items vary depending on the DIMMs
you install on the motherboard.
1st Information: 7-7-7-20-4-59-9-6-20-0
The values vary depending on your settings of the following sub-items:
DRAM CAS# Latency [Auto]
Configuration options: [Auto] [3 DRAM Clock] [4 DRAM Clock] – [10 DRAM Clock]
[11 DRAM Clock]
DRAM RAS# to CAS# Delay [Auto]
Configuration options: [Auto] [3 DRAM Clock] [4 DRAM Clock] – [9 DRAM Clock]
[10 DRAM Clock]
DRAM RAS# PRE Time [Auto]
Configuration options: [Auto] [3 DRAM Clock] [4 DRAM Clock] – [9 DRAM Clock]
[10 DRAM Clock]
DRAM RAS# ACT Time [Auto]
Configuration options: [Auto] [3 DRAM Clock] [4 DRAM Clock] – [30 DRAM Clock]
[31 DRAM Clock]
DRAM RAS# to RAS# Delay [Auto]
Configuration options: [Auto] [1 DRAM Clock] – [7 DRAM Clock]
3-14
Chapter 3: BIOS setup
DRAM REF Cycle Time [Auto]
Configuration options: [Auto] [30 DRAM Clock] [36 DRAM Clock]
[48 DRAM Clock] [60 DRAM Clock] [72 DRAM Clock] [82 DRAM Clock]
[88 DRAM Clock] [90 DRAM Clock] [100 DRAM Clock] [110 DRAM Clock]
DRAM WRITE Recovery Time [Auto]
Configuration options: [Auto] [1 DRAM Clock] – [15 DRAM Clock]
DRAM READ to PRE Time [Auto]
Configuration options: [Auto] [3 DRAM Clock] – [15 DRAM Clock]
DRAM FOUR ACT WIN Time [Auto]
Configuration options: [Auto] [1 DRAM Clock] – [63 DRAM Clock]
DRAM Back-To-Back CAS# Delay [Auto]
Configuration options: [Auto] [4 DRAM Clock] – [32 DRAM Clock]
2nd Information: 1N-61-0-0
The values vary depending on your settings of the following sub-items:
DRAM Timing Mode [Auto]
Configuration options: [Auto] [1N] [2N] [3N]
DRAM Round Trip Latency on CHA [Auto]
Configuration options: [Auto] [Advance 15 Clock] – [Advance 1 Clock] [Normal]
[Delay 1 Clock] – [Delay 15 Clock]
DRAM Round Trip Latency on CHB [Auto]
Configuration options: [Auto] [Advance 15 Clock] – [Advance 1 Clock] [Normal]
[Delay 1 Clock] – [Delay 15 Clock]
Chapter 3
DRAM Round Trip Latency on CHC [Auto]
Configuration options: [Auto] [Advance 15 Clock] – [Advance 1 Clock] [Normal]
[Delay 1 Clock] – [Delay 15 Clock]
3rd Information: 6-6-14-9-9-9-7-6-4-7-7-4
The values vary depending on your settings of the following sub-items:
DRAM WRITE to READ Delay(DD) [Auto]
Configuration options: [Auto] [1 DRAM Clock] – [8 DRAM Clock]
DRAM WRITE to READ Delay(DR) [Auto]
Configuration options: [Auto] [1 DRAM Clock] – [8 DRAM Clock]
DRAM WRITE to READ Delay(SR) [Auto]
Configuration options: [Auto] [10 DRAM Clock] – [22 DRAM Clock]
DRAM READ to WRITE Delay(DD) [Auto]
Configuration options: [Auto] [2 DRAM Clock] – [14 DRAM Clock]
DRAM READ to WRITE Delay(DR) [Auto]
Configuration options: [Auto] [2 DRAM Clock] – [14 DRAM Clock]
DRAM READ to WRITE Delay(SR) [Auto]
Configuration options: [Auto] [2 DRAM Clock] – [14 DRAM Clock]
ASUS P6X58D Premium
3-15
DRAM READ to READ Delay(DD) [Auto]
Configuration options: [Auto] [2 DRAM Clock] – [9 DRAM Clock]
DRAM READ to READ Delay(DR) [Auto]
Configuration options: [Auto] [2 DRAM Clock] – [9 DRAM Clock]
DRAM READ to READ Delay(SR) [Auto]
Configuration options: [Auto] [4 DRAM Clock] [6 DRAM Clock]
DRAM WRITE to WRITE Delay(DD) [Auto]
Configuration options: [Auto] [2 DRAM Clock] – [9 DRAM Clock]
DRAM WRITE to WRITE Delay(DR) [Auto]
Configuration options: [Auto] [2 DRAM Clock] – [9 DRAM Clock]
DRAM WRITE to WRITE Delay(SR) [Auto]
Configuration options: [Auto] [4 DRAM Clock] [6 DRAM Clock]
3.5.12
CPU Voltage Control [Manual]
[Manual]
[Offset]
Allows you to set a fixed CPU voltage.
Allows you to set the Offset voltage.
The following ten (10) items are adjusted by typing the desired values using the numeric
keypad and press the <Enter> key. You can also use the <+> and <-> keys to adjust the value.
To restore the default setting, type [auto] using the keyboard and press the <Enter> key.
3.5.13
CPU Voltage [Auto]
Chapter 3
Allows you to set the CPU VCore voltage. The values range from 0.85000V to 2.10000V*
with a 0.00625V interval.
3.5.14
•
Refer to the CPU documentation before setting the CPU Vcore voltage. Setting a high
VCore voltage may damage the CPU permanently, and setting a low VCore voltage
may make the system unstable.
•
The value [2.10000V] of the CPU Voltage item is supported only if the OV_CPU
jumper is enabled. Otherwise the maximum voltage supported is [1.70000V].
See CPU / DRAM Bus / QPI DRAM overvoltage setting on page 2-22 for details.
CPU PLL Voltage [Auto]
Allows you to set the CPU PLL voltage. The values range from 1.80V to 2.50V with a 0.02V
interval.
3.5.15
QPI/DRAM Core Voltage [Auto]
Allows you to set the QPI/DRAM Core voltage. The values range from 1.20000V to
1.90000V* with a 0.00625V interval.
The value [1.90000V] of the QPI/DRAM Core Voltage item is supported only if the
OV_QPI_DRAM jumper is enabled. Otherwise the maximum voltage supported is [1.70000V].
See CPU / DRAM Bus / QPI DRAM overvoltage setting on page 2-22 for details.
3-16
Chapter 3: BIOS setup
3.5.16
IOH Voltage [Auto]
Allows you to set the I/O Hub (IOH) voltage. The values range from 1.10V to 1.70V with a
0.02V interval.
3.5.17
IOH PCIE Voltage [Auto]
Allows you to set the IOH PCIE voltage. The values range from 1.50V to 2.76V with a 0.02V
interval.
3.5.18
ICH Voltage [Auto]
Allows you to set the I/O Controller Hub (ICH) voltage. The values range from 1.10V to 1.40V
with a 0.10V interval.
3.5.19
ICH PCIE Voltage [Auto]
Allows you to set the ICH PCIE voltage. The values range from 1.50V to 1.80V with a 0.10V
interval.
3.5.20
DRAM Bus Voltage [Auto]
•
The value [2.46V] of the DRAM Bus Voltage item is supported only if the
OV_DRAM_BUS jumper is enabled, otherwise the maximum voltage supported is [1.90V].
See CPU / DRAM Bus / QPI DRAM overvoltage setting on page 2-22 for details.
•
According to Intel CPU spec, DIMMs with voltage requirement over 1.65V may
damage the CPU permanently. We recommend you install the DIMMs with the voltage
requirement below 1.65V.
•
The values of the CPU Voltage, CPU PLL Voltage, QPI/DRAM Core Voltage, IOH
Voltage, IOH PCIE Voltage, ICH Voltage, ICH PCIE Voltage, and DRAM Bus
Voltage items are labeled in different color, indicating the risk levels of high voltage
settings. Refer to the table below for details.
•
The system may need better cooling system to work stably under high voltage
settings.
Blue
Yellow
Purple
Red
CPU Voltage
0.85000V–
1.22500V
1.23125V–
1.29375V
1.30000V–
1.35000V
1.35625V
1.70000V
CPU PLL Voltage
1.80V–1.90V
1.92V–2.00V
2.02V–2.10V
2.12V–2.50V
QPI/DRAM Core
Voltage
1.20000V–
1.26875V
1.27500V–
1.32500V
1.33125V–
1.40000V
1.40625V–
1.70000V
IOH Voltage
1.10V–1.18V
1.20V–1.24V
1.26V–1.30V
1.32V–1.70V
IOH PCIE Voltage
1.50V–1.58V
1.60V–1.66V
1.68V–1.74V
1.76V–2.76V
ICH Voltage
1.10V–1.20V
1.30V–1.40V
N/A
N/A
ICH PCIE Voltage
1.50V–1.60V
1.70V–1.80V
N/A
N/A
DRAM Bus Voltage
1.50V–1.64V
N/A
N/A
1.66V–2.46V
ASUS P6X58D Premium
Chapter 3
Allows you to set the DRAM voltage. The values range from 1.50V to 2.46V* with a 0.02V
interval.
3-17
3.5.21
DRAM DATA REF Voltage on CHA/B/C [Auto]
Allows you to set the DRAM DATA Reference Voltage on Channel A/B/C. The values
range from 0.395x to 0.630x with a 0.005x interval. Different ratio might enhance DRAM
overclocking ability.
3.5.22
DRAM CTRL REF Voltage on CHA/B/C [Auto]
Allows you to set the DRAM Control Reference Voltage on Channel A/B/C. The values
range from 0.395x to 0.630x with a 0.005x interval. Different ratio might enhance DRAM
overclocking ability.
3.5.23
[Auto]
[Disabled]
[Enabled]
3.5.24
Load-Line Calibration [Auto]
BIOS automatically adjusts the voltage.
Follows the Intel specifications.
Improves the CPU VDroop directly.
CPU Differential Amplitude [Auto]
Different AMP might enhance BCLK overclocking ability.
Configuration options: [Auto] [700mV] [800mV] [900mV] [1000mV]
3.5.25
CPU Clock Skew [Auto]
Adjusting this item may help enhancing BCLK overclocking ability. You may need to adjust
the IOH Clock Skew item at the same time.
Configuration options: [Auto] [Normal] [Delay 100ps] [Delay 200ps] – [Delay 1400ps]
[Delay 1500ps]
Chapter 3
3.5.26
CPU Spread Spectrum [Auto]
Set to [Disabled] to enhance BCLK overclocking ability or [Auto] for EMI control.
Configuration options: [Auto] [Disabled] [Enabled]
3.5.27
IOH Clock Skew [Auto]
Adjusting this item may help enhancing BCLK overclocking ability. You may need to adjust
the CPU Clock Skew item at the same time.
Configuration options: [Auto] [Normal] [Delay 100ps] [Delay 200ps] – [Delay 1400ps]
[Delay 1500ps]
3.5.28
PCIE Spread Spectrum [Auto]
Set to [Disabled] to enhance PCIE overclocking ability or [Auto] for EMI control.
Configuration options: [Auto] [Disabled] [Enabled]
3-18
Chapter 3: BIOS setup
3.6
Advanced menu
The Advanced menu items allow you to change the settings for the CPU and other system
devices.
Be cautious when changing the settings of the Advanced menu items. Incorrect field values
can cause the system to malfunction.
Main
Ai Tweaker
BIOS SETUP UTILITY
Advanced
Power
Boot
CPU Configuration
Chipset
Onboard Devices Configuration
USB Configuration
PCIPnP
Tools
Exit
Configure CPU.
←→
↑↓
Enter
F1
F10
ESC
Select Screen
Select Item
Go to Sub Screen
General Help
Save and Exit
Exit
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
3.6.1
CPU Configuration
The items in this menu show the CPU-related information that the BIOS automatically
detects.
BIOS SETUP UTILITY
Advanced
Configure advanced CPU settings
Module Version:3F.11
Manufacturer:Intel
Brand String:Genuine Intel(R) CPU 000 @ 3.20GHz
Frequency
:3.20GHz
BCLK Speed :133MHz
Cache L1
:128 KB
Cache L2
:1024 KB
Cache L3
:8192 KB
Ratio Actual Value:24
CPUID
:106A4
CPU Ratio Setting
C1E Support
Hardware Prefetcher
Adjacent Cache Line Prefetch
Intel(R) Virtualization Tech
CPU TM Function
Execute-Disable Bit
[Auto]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
Chapter 3
The items shown in this screen may be different due to the CPU you installed.
Sets the ratio between
CPU Core Clock and the
FSB Frequency.
NOTE: If an invalid
ratio is set in CMOS
then actual and
setpoint values may
differ.
NOTE: Please key in
ratio numbers directly
←→
↑↓
F1
F10
ESC
Select Screen
Select Item
General Help
Save and Exit
Exit
Scroll down to display the following items:
Intel(R) HT Technology
Active Processor Cores
A20M
Intel(R) SpeedStep(TM) Tech
Intel(R) TurboMode Tech
Intel(R) C-STATE Tech
[Enabled]
[All]
[Disabled]
[Enabled]
[Enabled]
[Disabled]
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
ASUS P6X58D Premium
3-19
CPU Ratio Setting [Auto]
Allows you to set the ratio between the CPU Core Clock and the BCLK Frequency. Use <+>
and <-> keys to adjust the ratio. The valid value ranges vary according to your CPU model.
C1E Support [Enabled]
[Enabled]
[Disabled]
Enables the C1E support function. This item should be enabled in order to
enable the Enhanced Halt Sate.
Disables this function.
Hardware Prefetcher [Enabled]
[Enabled]
[Disabled]
The processor fetches data and instructions from the memory into the
cache that are likely to be required in the near future. This reduces the
latency associated with memory reads.
Disables this function.
Adjacent Cache Line Prefetch [Enabled]
[Enabled]
[Disabled]
The processor fetches the currently requested cache line, as well as the
subsequent cache line. This reduces the cache latency by making the next
cache line immediately available if the processor requires it as well.
The processor fetches only the currently requested cache line.
Intel(R) Virtualization Tech [Enabled]
[Enabled]
[Disabled]
Allows a hardware platform to run multiple operating systems separately
and simultaneously, enabling one system to virtually function as several
systems.
Disables this function.
Chapter 3
CPU TM function [Enabled]
[Enabled]
[Disabled]
Enables the overheated CPU to throttle its clock speed to cool down.
Disables this function.
Execute Disable Bit [Enabled]
[Enabled]
[Disabled]
Enables the No-Execution Page Protection Technology.
Forces the XD feature flag to always return to zero (0).
Intel(R) HT Technology [Enabled]
The Intel Hyper-Threading Technology allows a hyper-threading processor to appear as two
logical processors to the operating system, allowing the operating system to schedule two
threads or processes simultaneously.
[Enabled]
[Disabled]
Two threads per activated core are enabled.
Only one thread per activated core is enabled.
Active Processor Cores [All]
Allows you to choose the number of CPU cores to activate in each processor package.
Configuration options: [All] [1] [2]
3-20
Chapter 3: BIOS setup
A20M [Disabled]
[Enabled]
[Disabled]
Allows Legacy OSes to be compatible with APs.
Disables this function.
Intel(R) SpeedStep(TM) Tech [Enabled]
[Enabled]
[Disabled]
The CPU speed is controlled by the operating system.
The CPU runs at its default speed.
Intel(R) TurboMode Tech [Enabled]
[Enabled]
[Disabled]
Allows processor cores to run faster than marked frequency in specific
condition.
Disables this function.
Intel(R) C-STATE Tech [Disabled]
The Intel® C-State Technology allows the CPU to save more power under idle mode.
[Enabled]
[Disabled]
Enable this item only when you install a C-State Technology-supported
CPU.
Disables this function.
C State package limit setting [Auto]
Chapter 3
This item appears only when you set the Intel(R) C-STATE Tech item to [Enabled]. We
recommend that you set this item to [Auto] for BIOS to automatically detect the C-State mode
supported by your CPU. Configuration options: [Auto] [C1] [C3] [C6] [C7]
ASUS P6X58D Premium
3-21
3.6.2
Chipset
The Chipset menu allows you to change the advanced chipset settings. Select an item and
press <Enter> to display the submenu.
BIOS SETUP UTILITY
Advanced
Advanced Chipset Settings
WARMING: Setting wrong values in below sections
may cause system to malfunction.
Configure North Bridge
features.
North Bridge Configuration
Intel VT-d Configuration
North Bridge Chipset Configuration
BIOS SETUP UTILITY
Advanced
North Bridge Chipset Configuration
Revision
:B3
PCI Express Selector
[Auto]
Select PCIE Slot#2
and PCIE Slot#3 Link
Width x8 + x8 or
x16 + x1
PCI Express Selector [Auto]
Allows you to decide the Link Width of the PCIe x16_2 slot and PCIe x16_3 slot.
Configuration options: [Auto] [x8 x8 Mode] [x16 x1 Mode]
Intel VT-d Configuration
Advanced
BIOS SETUP UTILITY
Chapter 3
Intel VT-d Configuration
Intel VT-d
[Disabled]
Intel Virtualization
Technology for
Directed I/O.
Intel VT-d [Disabled]
Allows you to enable or disable the Intel Virtualization Technology for Directed I/O.
Configuration options: [Disabled] [Enabled]
3.6.3
Onboard Devices Configuration
Advanced
BIOS SETUP UTILITY
Onboard Devices Configuration
High Definition Audio
Front Panel Type
SPDIF OUT Mode Setting
Marvell LAN1
Marvell LAN2
LAN Boot ROM
Onboard 1394 Controller
Marvell 9123 Controller
3-22
Options
[Enabled]
[HD Audio]
[SPDIF]
[Enabled]
[Enabled]
[Disabled]
[Enabled]
[IDE Mode]
Enabled
Disabled
Chapter 3: BIOS setup
High Definition Audio [Enabled]
[Enabled]
[Disabled]
Enables the High Definition Audio Controller.
Disables the controller.
The following item appears only when you set the High Definition Audio item to [Enabled].
Front Panel Type [HD Audio]
Allows you to set the front panel audio connector (AAFP) mode to legacy AC’97 or
high-definition audio depending on the audio standard that the front panel audio
module supports.
[AC97]
Sets the front panel audio connector (AAFP) mode to legacy AC’97
[HD Audio] Sets the front panel audio connector (AAFP) mode to high definition audio.
SPDIF_OUT Mode Setting [SPDIF Output]
If your graphics card has HDMI output and needs to use SPDIF signal from the
SPDIF_Out header, you need to set to HDMI Output for HDMI audio output.
[SPDIF Output] Sets to [SPDIF Output] for SPDIF audio output.
[HDMI Output]
Sets to [HDMI Output] for HDMI audio output.
Marvell LAN1/LAN2 [Enabled]
[Enabled]
[Disabled]
Enables the Marvell LAN1/LAN2 controller.
Disables the controller.
LAN Boot ROM [Disabled]
This item appears only when you set the previous item to [Enabled].
Chapter 3
[Enabled] Enables the Atheros Gigabit LAN Boot ROM.
[Disabled] Disables the LAN Boot ROM.
Onboard 1394 Controller [Enabled]
[Enabled]
[Disabled]
Enables the onboard IEEE 1394a controller.
Disables the controller.
Marvell 9123 Controller [IDE Mode]
Allows you to select the Marvell 9123 controller operating mode.
[Disabled]
[IDE Mode]
[AHCI Mode]
Disables the controller.
Set to [IDE Mode] when you want to use the Serial ATA hard disk drives as
Parallel ATA physical storage devices.
Set to [AHCI Mode] when you want the SATA hard disk drives to use the
AHCI (Advanced Host Controller Interface). The AHCI allows the onboard
storage driver to enable advanced Serial ATA features that increases
storage performance on random workloads by allowing the drive to
internally optimize the order of commands..
ASUS P6X58D Premium
3-23
3.6.4
USB Configuration
The items in this menu allow you to change the USB-related features. Select an item and
press <Enter> to display the configuration options.
Advanced
BIOS SETUP UTILITY
USB Configuration
Options
USB Devices Enabled:
1 Mouse
USB Functions NEC USB 3.0 Controller
USB 2.0 Controller
USB 2.0 Controller Mode
BIOS EHCI Hand-Off
Legacy USB Support
[Enabled]
[Enabled]
[Enabled]
[HiSpeed]
[Enabled]
[Auto]
Disabled
Enabled
The USB Devices Enabled item shows the auto-detected values. If no USB device is
detected, the item shows None.
USB Functions [Enabled]
[Enabled]
[Disabled]
Enables the USB Host Controllers.
Disables the controllers.
The following two items appear only when you set USB Functions to [Enabled].
NEC USB 3.0 Controller [Enabled]
Chapter 3
[Enabled]
[Disabled]
Enables the USB 3.0 controller.
Disables the controller.
USB 2.0 Controller [Enabled]
[Enabled]
[Disabled]
Enables the USB 2.0 controller.
Disables the controller.
USB 2.0 Controller Mode [HiSpeed]
[FullSpeed]
[HiSpeed]
Sets the USB 2.0 controller mode to FullSpeed (12 Mbps).
Sets the USB 2.0 controller mode to HiSpeed (480 Mbps).
BIOS EHCI Hand-off [Enabled]
[Enabled]
[Disabled]
Enables the support for operating systems without an EHCI hand‑off
feature.
Disables the function.
The following item appears only when you set USB Functions to [Enabled].
3-24
Chapter 3: BIOS setup
Legacy USB Support [Auto]
[Auto]
[Enabled]
[Disabled]
3.6.5
Allows the system to detect the presence of USB devices at startup. If
detected, the USB controller legacy mode is enabled. If no USB device is
detected, the legacy USB support is disabled.
Enables the support for USB devices on legacy operating systems (OS).
Disables the function.
PCIPnP
The PCI PnP menu items allow you to change the advanced settings for PCI/PnP devices.
Advanced
BIOS SETUP UTILITY
Advanced PCI/PnP Settings
WARNING: Setting wrong values in below sections
may cause system to malfunction.
Plug And Play O/S
[No]
Plug And Play O/S [No]
[No]
When set to [Yes] and if you install a Plug and Play operating system, the
operating system configures the Plug and Play devices not required for
boot.
When set to [No], BIOS configures all the devices in the system.
ASUS P6X58D Premium
Chapter 3
[Yes]
3-25
3.7
Power menu
The Power menu items allow you to change the settings for the Advanced Power
Management (APM). Select an item then press <Enter> to display the configuration options.
Main
Ai Tweaker
BIOS SETUP UTILITY
Advanced
Power
Boot
Suspend Mode
[Auto]
Repost Video on S3 Resume[Disabled]
ACPI 2.0 Support
[Disabled]
ACPI APIC Support
[Enabled]
Tools
Exit
Select the ACPI state
used for System
Suspend.
APM Configuration
Hardware Monitor
EuP Ready
[Disabled]
←→
↑↓
Enter
F1
F10
ESC
Select Screen
Select Item
Go to Sub Screen
General Help
Save and Exit
Exit
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
3.7.1
Suspend Mode [Auto]
Allows you to select the Advanced Configuration and Power Interface (ACPI) state to be used
for system suspend.
[Auto]The system automatically configures the ACPI suspend mode.
[S1 (POS) only] Sets the ACPI suspend mode to S1/POS (Power On Suspend).
[S3 only]
Sets the ACPI suspend mode to S3/STR (Suspend To RAM).
3.7.2
Repost Video on S3 Resume [No]
Chapter 3
Determines whether to invoke VGA BIOS POST on S3/STR resume.
[No]
[Yes]
3.7.3
[Disabled]
[Enabled]
3.7.4
[Disabled]
[Enabled]
3.7.5
[Disabled]
[Enabled]
3-26
The system will not invoke VGA BIOS POST on S3/STR resume.
The system invokes VGA BIOS POST on S3/STR resume.
ACPI 2.0 Support [Disabled]
The system will not add additional tables as per ACPI 2.0 specifications.
The system adds additional tables as per ACPI 2.0 specifications.
ACPI APIC Support [Enabled]
The system disables the Advanced Configuration and Power Interface
(ACPI) support in the Advanced Programmable Interrupt Controller (APIC).
The ACPI APIC table pointer is included in the RSDT pointer list.
EuP Ready [Disabled]
Disables the Energy Using Products (EuP) Ready function.
Allows BIOS to switch off some power at S5 state to get system ready for
the EuP requirement. When set to [Enabled], power for WOL, WO_USB,
audio and onboard LEDs will be switched off at S5 state.
Chapter 3: BIOS setup
3.7.6
APM Configuration
BIOS SETUP UTILITY
Power
APM Configuration
Restore on AC Power Loss
[Power Off]
Power
Power
Power
Power
Power
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
On
On
On
On
On
By
By
By
By
By
RTC Alarm
PCI Devices
PCIE Devices
PS/2 Keyboard
PS/2 Mouse
Options
Power Off
Power On
Last State
Restore On AC Power Loss [Power Off]
[Power On]
[Power Off]
[Last State]
The system goes into on state after an AC power loss.
The system goes into off state after an AC power loss.
The system goes into either off or on state, whatever the system state was
before the AC power loss.
Power On By RTC Alarm [Disabled]
[Disabled]
[Enabled]
Disables RTC to generate a wake event.
When set to [Enabled], the items RTC Alarm Date (Days) and System
Time will become user-configurable with set values.
Power On By External Modems [Disabled]
[Disabled]Disables to power up the computer when the external modem receives a
call while the computer is in Soft-off mode.
[Enabled]The computer could be powered up when the external modem receives a
call while the computer is in Soft-off mode.
Chapter 3
The computer cannot receive or transmit data until the computer and applications are fully
running. Thus, connection cannot be made on the first try. Turning an external modem
off and then back on while the computer is off causes an initialization string that turns the
system power on.
Power On By PCI Devices [Disabled]
[Disabled]
[Enabled]
Disables the PME to wake up from S5 by PCI devices.
Allows you to turn on the system through a PCI LAN or modem card. This
feature requires an ATX power supply that provides at least 1A on the
+5VSB lead.
Power On By PCIE Devices [Disabled]
[Disabled]Disables the PCIE devices to generate a wake event.
[Enabled]Enables the PCIE devices to generate a wake event.
Power On By PS/2 Keyboard [Disabled]
[Disabled]
[Enabled]
Disables the Power On by a PS/2 keyboard.
Sets specific keys on the PS/2 keyboard to turn on the system. This feature
requires an ATX power supply that provides at least 1A on the +5VSB lead.
Power On By PS/2 Mouse [Disabled]
[Disabled]
[Enabled]
Disables the Power On by a PS/2 mouse.
Enables the Power On by a PS/2 mouse. This feature requires an ATX
power supply that provides at least 1A on the +5VSB lead.
ASUS P6X58D Premium
3-27
3.7.7
Hardware Monitor
BIOS SETUP UTILITY
Power
Hardware Monitor
CPU Temperature
CPU Temperature
MB Temperature
[44ºC/111ºF]
[35ºC/95ºF]
CPU Fan Speed
CPU Q-Fan Control
[1534RPM]
[Disabled]
Chassis
Chassis
Chassis
Chassis
[N/A]
[N/A]
[N/A]
[Disabled]
Fan 1
Fan 2
Fan 3
Q-Fan
Speed
Speed
Speed
Control
Power Fan Speed
[N/A]
CPU
3.3V
5V
12V
[ 1.120V]
[ 3.200V]
[ 5.214V]
[13.092V]
Voltage
Voltage
Voltage
Voltage
←→
↑↓
Enter
F1
F10
ESC
Select Screen
Select Item
Go to Sub Screen
General Help
Save and Exit
Exit
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
CPU/MB Temperature [xxxºC/xxxºF]
The onboard hardware monitor automatically detects and displays the CPU and motherboard
temperatures. Select Ignored if you do not wish to display the detected temperatures.
CPU Fan Speed [xxxxRPM] or [Ignored] / [N/A]
Chassis Fan 1/2/3 Speed [xxxxRPM] or [Ignored] / [N/A]
Power Fan Speed [xxxxRPM] or [Ignored] / [N/A]
Chapter 3
The onboard hardware monitor automatically detects and displays the CPU, chassis,
and power fan speed in rotations per minute (RPM). If the fan is not connected to the
motherboard, the field shows N/A. Select Ignored if you do not wish to display the detected
speed.
CPU Q-Fan Control [Disabled]
[Disabled]
[Enabled]
Disables the CPU Q-Fan control feature.
Enables the CPU Q-Fan control feature.
CPU Fan Profile [Standard]
This item appears only when you enable the CPU Q-Fan Control feature and allows
you to set the appropriate performance level of the CPU fan.
[Standard]Sets to [Standard] to make the CPU fan automatically adjust depending on
the CPU temperature.
[Silent]Sets to [Silent] to minimize the fan speed for quiet CPU fan operation.
[Turbo]
Sets to [Turbo] to achieve maximum CPU fan speed.
Chassis Q-Fan Control [Disabled]
[Disabled]
[Enabled]
3-28
Disables the Chassis Q-Fan control feature.
Enables the Chassis Q-Fan control feature.
Chapter 3: BIOS setup
Chassis Fan Profile [Standard]
This item appears only when you enable the Chassis Q-Fan Control feature and
allows you to set the appropriate performance level of the chassis fan.
[Standard]Sets to [Standard] to make the chassis fan automatically adjust depending
on the chassis temperature.
[Silent]Sets to [Silent] to minimize the fan speed for quiet chassis fan operation.
[Turbo]
Sets to [Turbo] to achieve maximum chassis fan speed.
CPU Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage
The onboard hardware monitor automatically detects the voltage output through the onboard
voltage regulators. Select Ignored if you do not want to detect this item.
3.8
Boot menu
The Boot menu items allow you to change the system boot options. Select an item then press
<Enter> to display the submenu.
Ai Tweaker
BIOS SETUP UTILITY
Advanced
Power
Boot
Tools
Exit
Specifies the Boot Device
Boot Priority sequence.
Boot Settings
Boot Device Priority
A virtual floppy disk
drive (Floppy Drive B:
) may appear when you
set the CD-ROM drive
as the first boot
device.
Boot Settings Configuration
Security
←→
↑↓
Enter
F1
F10
ESC
Chapter 3
Main
Select Screen
Select Item
Go to Sub Screen
General Help
Save and Exit
Exit
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
3.8.1
Boot Device Priority
BIOS SETUP UTILITY
Boot
Boot Device Priority
1st Boot Device
2nd Boot Device
3rd Boot Device
[Removable Dev.]
[Hard Drive]
[ATAPI DVD-ROM]
1st – xxth Boot Device [Removable Dev.]
These items specify the boot device priority sequence from the available devices. The
number of device items that appears on the screen depends on the number of devices
installed in the system.
Configuration options: [Removable Dev.] [Hard Drive] [ATAPI CD-ROM] [Disabled]
ASUS P6X58D Premium
3-29
3.8.2
Boot Settings Configuration
BIOS SETUP UTILITY
Boot
Boot Settings Configuration
Quick Boot Full Screen Logo
AddOn ROM Display Mode
Bootup Num-Lock
Wait For ‘F1’ If Error
Hit ‘DEL’ Message Display
[Enabled]
[Enabled]
[Force BIOS]
[On]
[Enabled]
[Enabled]
Allows BIOS to skip
certain tests while
booting. This will
decrease the time
needed to boot the
system.
Quick Boot [Enabled]
[Disabled]
When set to [Disabled], BIOS performs all the POST items.
[Enabled]When set to [Enabled], BIOS skips some power on self tests (POST) while
booting to decrease the time needed to boot the system.
Full Screen Logo [Enabled]
[Enabled]
[Disabled]
Enables the full screen logo display feature.
Disables the full screen logo display feature.
Set this item to [Enabled] to use the ASUS MyLogo 2™ feature.
AddOn ROM Display Mode [Force BIOS]
[Force BIOS]
The third-party ROM messages will be forced to display during the boot
sequence.
[Keep Current] The third-party ROM messages will be displayed only if the third-party
manufacturer had set the add-on device to do so.
Chapter 3
Bootup Num-Lock [On]
[Off]
[On]
Sets the power-on state of the NumLock to [Off].
Sets the power-on state of the NumLock to [On].
Wait For ‘F1’ If Error [Enabled]
[Disabled]
[Enabled]
Disables this function.
The system waits for the <F1> key to be pressed when error occurs.
Hit ‘DEL’ Message Display [Enabled]
[Disabled]
[Enabled]
3-30
Disables this function.
The system displays the message “Press DEL to run Setup” during POST.
Chapter 3: BIOS setup
3.8.3
Security
The Security menu items allow you to change the system security settings. Select an item
and press <Enter> to display the configuration options.
BIOS SETUP UTILITY
Boot
Security Settings
Supervisor Password
User Password
: Not Installed
: Not Installed
<Enter> to change
password.
<Enter> again to
disable password.
Change Supervisor Password
Change User Passward
Change Supervisor Password
Select this item to set or change the supervisor password. The Supervisor Password item
on top of the screen shows the default Not Installed. After you set a password, this item
shows Installed.
To set a Supervisor Password:
1.
2.
3.
Select the Change Supervisor Password item and press <Enter>.
From the password box, key in a password composed of at least six letters and/or
numbers, then press <Enter>.
Confirm the password when prompted.
The message Password Installed appears after you successfully set your password.
To change the supervisor password, follow the same steps as in setting a user password.
To clear the supervisor password, select the Change Supervisor Password then press
<Enter>. The message Password Uninstalled appears.
Chapter 3
If you have forgotten your BIOS password, you can clear clear it by erasing the CMOS Real
Time Clock (RTC) RAM. See section 2.6 Jumpers for information on how to erase the RTC
RAM.
After you have set a supervisor password, the other items appear to allow you to change
other security settings.
BIOS SETUP UTILITY
Boot
Security Settings
Supervisor Password
User Password
: Installed
: Installed
Change Supervisor Password
User Access Level
Change User Password
Clear User Password
Password Check
<Enter> to change
password.
<Enter> again to
disabled password.
[Full Access]
[Setup]
User Access Level [Full Access]
This item allows you to select the access restriction to the Setup items.
[No Access]
[View Only]
[Limited]
[Full Access]
Prevents user access to the Setup utility.
Allows access but does not allow change to any field.
Allows changes only to selected fields, such as Date and Time.
Allows viewing and changing all the fields in the Setup utility.
ASUS P6X58D Premium
3-31
Change User Password
Select this item to set or change the user password. The User Password item on top of the
screen shows the default Not Installed. After you set a password, this item shows Installed.
To set a User Password:
1.
2.
3.
Select the Change User Password item and press <Enter>.
On the password box that appears, type a password composed of at least six letters
and/or numbers, then press <Enter>.
Confirm the password when prompted.
The message Password Installed appears after you set your password successfully.
To change the user password, follow the same steps as in setting a user password.
Clear User Password
Select this item to clear the user password.
Password Check [Setup]
[Setup]
[Always]
BIOS checks for user password when accessing the Setup utility.
BIOS checks for user password both when accessing Setup and booting
the system.
Chapter 3
3-32
Chapter 3: BIOS setup
3.9
Tools menu
The Tools menu items allow you to configure options for special functions. Select an item
then press <Enter> to display the submenu.
Main
Ai Tweaker
BIOS SETUP UTILITY
Advanced
Power
Boot
ASUS EZ Flash 2
Express Gate Enter OS Timer
Reset User Data
Tools
Exit
Press ENTER to run
the utility to select
and update BIOS.
This utility supports:
1.FAT 12/16/32 (r/w)
2.NTFS (read only)
3.CD-DISC (read only)
[Auto]
[10 Seconds]
[No]
ASUS O.C. Profile
AI NET 2
←→
↑↓
Enter
F1
F10
ESC
Select Screen
Select Item
Go to Sub Screen
General Help
Save and Exit
Exit
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
3.9.1
ASUS EZ Flash 2
Allows you to run ASUS EZ Flash 2. When you press <Enter>, a confirmation message
appears. Use the left/right arrow key to select between [Yes] or [No], then press <Enter> to
confirm your choice.
Chapter 3
For more details, refer to section 3.2.2 ASUS EZ Flash 2 utility.
ASUSTek EZ Flash 2 BIOS ROM Utility V3.44
FLASH TYPE: MXIC 25L1605A
Current ROM
BOARD: P6X58D PREMIUM
VER: 0216
DATE: 10/16/2009
Update ROM
BOARD: Unknown
VER: Unknown
DATE: Unknown
PATH: A:\
A:
Note
[Enter] Select or Load
[Up/Down/Home/End] Move
ASUS P6X58D Premium
[Tab] Switch
[B] Backup
[V] Drive Info
[Esc] Exit
3-33
3.9.2
Express Gate [Auto]
Allows you to enable or disable the ASUS Express Gate feature. The ASUS Express Gate
feature is a unique instant-on environment that provides quick access to the Internet browser
and Skype. Configuration options: [Enabled] [Disabled] [Auto]
Enter OS Timer [10 Seconds]
Sets countdown duration that the system waits at the Express Gate’s first screen before
starting Windows or other installed OS. Choose [Prompt User] to stay at the first screen of
Express Gate for user action.
Configuration options: [Prompt User] [1 second] [3 seconds] [5 seconds] [10 seconds]
[15 seconds] [20 seconds] [30 seconds]
Reset User Data [No]
Allows you to clear Express Gate’s user data.
[Reset]When setting this item to [Reset], ensure that you save the setting to the
BIOS so that the user data will be cleared the next time you enter the
Express Gate. User data includes the Express Gate’s settings as well as
any personal information stored by the web browser such as bookmarks,
cookies, browsing history. This is useful in the rare case where corrupt
settings prevent the Express Gate environment from launching properly.
[No]Sets to [No] to disable the Reset User Data function when entering the
Express Gate.
The first time wizard will run again when you enter the Express Gate environment after
clearing its settings.
Chapter 3
3-34
Chapter 3: BIOS setup
3.9.3
ASUS O.C. Profile
This item allows you to store or load multiple BIOS settings.
BIOS SETUP UTILITY
Tools
O.C. PROFILE Configuration
O.C. Profile 1 Status
O.C. Profile 2 Status
Typing your profile
name, [0-9][a-z][A-Z]
are acceptable.
: Not Installed
: Not Installed
Add Your CMOS Profile.
Name:
Save To:
Load CMOS Profiles.
Load From:
[Default-Profile]
[Uninstalled]
[Blank]
Start O.C. Profile
Add Your CMOS Profile
Allows you to save the current BIOS file to the BIOS Flash. In the Name sub-item, key in
your profile name and press <Enter>, and then choose a profile number to save your CMOS
settings in the Save to sub-item.
Load CMOS Profiles.
Allows you to load the previous BIOS settings saved in the BIOS Flash. Press <Enter> to
load the file.
Start O.C. Profile
Allows you to run the utility to save and load CMOS. Press <Enter> to run the utility.
ASUSTek O.C. Profile Utility V1.44
Current CMOS
BOARD: P6X58D PREMIUM
VER: 0216
DATE: 10/16/2009
Chapter 3
Restore CMOS
BOARD: Unknown
VER: Unknown
DATE: Unknown
PATH: A:\
A:
Note
[Enter] Select or Load
[Up/Down/Home/End] Move
[Tab] Switch
[B] Backup
[V] Drive Info
[Esc] Exit
•
This function can support devices such as a USB flash disk with FAT 32/16 format and
single partition only.
•
DO NOT shut down or reset the system while updating the BIOS to prevent the
system boot failure!
•
We recommend that you update the BIOS file only coming from the same memory/CPU
configuration and BIOS version.
•
Only the CMO file can be loaded.
ASUS P6X58D Premium
3-35
3.9.4
AI NET 2
BIOS SETUP UTILITY
AI NET 2
Pair Status
Check Marvell LAN
cable during POST.
Length
Check Marvell LAN cable
Tools
[Disabled]
Check Marvell LAN cable [Disabled]
[Disabled]
[Enabled]
BIOS will not check the Marvell LAN cable during the Power-On Self-Test
(POST).
BIOS checks the Marvell LAN cable during the Power-On Self-Test (POST).
Chapter 3
3-36
Chapter 3: BIOS setup
3.10 Exit menu
The Exit menu items allow you to load the optimal or failsafe default values for the BIOS
items, and save or discard your changes to the BIOS items.
Main
Ai Tweaker
Exit Options
Exit & Save Changes
Exit & Discard Changes
Discard Changes
Load Setup Defaults
BIOS SETUP UTILITY
Advanced
Power
Boot
Tools
Exit
Exit system setup
after saving the
changes.
F10 key can be used
for this operation.
←→
↑↓
Enter
F1
F10
ESC
Select Screen
Select Item
Go to Sub Screen
General Help
Save and Exit
Exit
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
Pressing <Esc> does not immediately exit this menu. Select one of the options from this
menu or <F10> from the legend bar to exit.
Exit & Save Changes
Once you are finished making your selections, choose this option from the Exit menu to
ensure the values you selected are saved to the CMOS RAM. An onboard backup battery
sustains the CMOS RAM so it stays on even when the PC is turned off. When you select this
option, a confirmation window appears. Select Ok to save changes and exit.
Chapter 3
If you attempt to exit the Setup program without saving your changes, the program prompts
you with a message asking if you want to save your changes before exiting. Press <Enter>
to save the changes while exiting.
Exit & Discard Changes
Select this option only if you do not want to save the changes that you made to the
Setup program. If you made changes to fields other than System Date, System Time, and
Password, the BIOS asks for a confirmation before exiting.
Discard Changes
This option allows you to discard the selections you made and restore the previously saved
values. After selecting this option, a confirmation appears. Select Ok to discard any changes
and load the previously saved values.
Load Setup Defaults
This option allows you to load the default values for each of the parameters on the Setup
menus. When you select this option or if you press <F5>, a confirmation window appears.
Select Ok to load default values. Select Exit & Save Changes or make other changes before
saving the values to the non-volatile RAM.
ASUS P6X58D Premium
3-37
Chapter 3
3-38
Chapter 3: BIOS setup
Chapter 4
Chapter 4:
4.1
Software support
Installing an operating system
This motherboard supports Windows® XP/ 64-bit XP/ Vista / 64-bit Vista / 7 / 64-bit 7
operating systems (OS). Always install the latest OS version and corresponding updates to
maximize the features of your hardware.
4.2
•
Motherboard settings and hardware options vary. Use the setup procedures presented
in this chapter for reference only. Refer to your OS documentation for detailed
information.
•
Ensure that you install the Windows® XP Service Pack 2 or later versions before
installing the drivers for better compatibility and system stability.
Support DVD information
The support DVD that comes with the motherboard package contains the drivers, software
applications, and utilities that you can install to avail all motherboard features.
The contents of the support DVD are subject to change at any time without notice. Visit the
ASUS website at www.asus.com for updates.
4.2.1
Running the support DVD
Place the support DVD into the optical drive. The DVD automatically displays the Drivers menu if
Autorun is enabled in your computer. Click each menu tab and select the items you want to install.
The Drivers menu shows the available
device drivers if the system detects
installed devices. Install the necessary
drivers to use the devices.
The Utilities
menu shows the
applications and
other software that
the motherboard
supports.
The Make Disk menu
contains items to
create the RAID/AHCI
driver disk.
The Manual menu contains
the list of supplementary user
manuals. Click an item to open
the folder of the user manual.
Click the Contact
tab to display the
ASUS contact
information.
Click an icon
to display DVD/
motherboard
information
Chapter 4
Click an item
to install
If Autorun is NOT enabled in your computer, browse the contents of the support DVD to
locate the file ASSETUP.EXE from the BIN folder. Double-click the ASSETUP.EXE to run
the DVD.
ASUS P6X58D Premium
4-1
4.2.2
Obtaining the software manuals
The software manuals are included in the support DVD. Follow the instructions below to get
the necessary software manuals.
The software manual files are in Portable Document Format (PDF). Install the Adobe®
Acrobat® Reader from the Utilities menu before opening the files.
1.
Click the Manual tab. Click ASUS
Motherboard Utility Guide from
the manual list on the left.
2.
The Manual folder of the support
DVD appears. Double-click the
folder of your selected software.
3.
Some software manuals are
provided in different languages.
Double-click the language to
show the software manual.
Chapter 4
The screenshots in this section are for reference only. The actual software manuals
containing in the support DVD vary by models.
4-2
Chapter 4: Software support
4.3
Software information
Most of the applications in the support DVD have wizards that will conveniently guide you
through the installation. View the online help or readme file that came with the software
application for more information.
4.3.1
ASUS PC Probe II
PC Probe II is a utility that monitors the computer’s vital components, and detects and
alerts you of any problem with these components. PC Probe II senses fan rotations, CPU
temperature, and system voltages, among others. Because PC Probe II is software-based,
you can start monitoring your computer the moment you turn it on. With this utility, you are
assured that your computer is always at a healthy operating condition.
Launching PC Probe II
1.
2.
3.
Install PC Probe II from the motherboard support DVD.
Launch PC Probe II by clicking Start > All Programs > ASUS > PC Probe II > PC
Probe II v1.xx.xx. The PC Probe II main window appears.
The PC Probe II icon appears in the Windows® notification area. Click this icon to close
or restore the application.
PC Probe II main window
Button
Function
Opens the Configuration window
Opens the Report window
Opens the Desktop Management Interface window
Opens the Peripheral Component Interconnect window
Opens the Windows Management Instrumentation window
Chapter 4
Opens the hard disk drive, memory, CPU usage window
Shows/Hides the Preference section
Minimizes the application
Closes the application
Refer to the software manual in the support DVD or visit the ASUS website at
www.asus.com for detailed software configuration.
ASUS P6X58D Premium
4-3
4.3.2 ASUS AI Suite
ASUS AI Suite allows you to launch several ASUS utilities easily.
Launching AI Suite
1.
Install AI Suite from the motherboard support DVD.
2.
Launch AI Suite by clicking Start > All Programs > ASUS > AI Suite > AI Suite v1.xx.
xx. The AI Suite main window appears.
3.
The AI Suite icon
appears in the Windows® notification area. If you minimize the
application main window, click this icon to restore the window.
Using AI Suite
Click each utility button to launch the utility, or click the Normal button to restore system
default settings.
Click to open the monitor window that displays
system information such as CPU temperature,
CPU voltage, fan speed, and CPU/FSB frequency
Click to restore
default settings
Click to launch
each utility
Chapter 4
4-4
•
The screenshots in this section are for reference only. The actual utility buttons vary
by models.
•
Refer to the software manual in the support DVD or visit the ASUS website at
www.asus.com for detailed software configuration.
Chapter 4: Software support
4.3.3
ASUS EPU
ASUS EPU is an energy-efficient tool that provides you with a total system power-saving
solution. It detects the current computer loading and intelligently adjusts the power in
real-time. With auto phase switching for components, the EPU automatically provides the
most appropriate power usage via intelligent acceleration and overclocking.
ASUS EPU provides you with these modes to choose from:
•
Turbo Mode
•
Medium Power Saving Mode
•
High Performance Mode
•
Max. Power Saving Mode
When you select Auto Mode
, the system shifts modes automatically according to the
current system status. You can also configure advanced settings for each mode.
Launching EPU
After installing EPU from the motherboard support
DVD, double-click the EPU tray icon to launch the
program.
The first time you launch EPU, the
following message will appear, asking
you to run Calibration first. Running
calibration allows the system to detect
CPU properties to optimize power
management.
Click Run Calibration and wait for a few seconds. Then, the EPU main menu appears.
Chapter 4
EPU main menu
Refer to the software manual in the support DVD or visit the ASUS website
at www.asus.com for detailed software configuration.
ASUS P6X58D Premium
4-5
4.3.4
ASUS Fan Xpert
Asus Fan Xpert allows you to adjust both the CPU and chassis fan speeds according to
different ambient temperatures and your PC’s system loading. The various fan profiles offer
flexible controls of fan speeds to achieve a quiet and cool system environment.
Launching Fan Xpert
After installing AI Suite from the motherboard support DVD, launch Fan Xpert by doubleclicking the AI Suite tray icon and then clicking the Fan Xpert button
on the AI Suite
main window.
Using Fan Xpert
Click to open the
Calibration window
Click to select a fan
Click to select a
fan profile
Click to apply
the settings
Click to display
the current CPU
temperature and the fan
speed ratio
Click to cancel
the settings
Fan profiles
•
Disable: disables the Fan Xpert function.
•
Silent: minimizes fan speed for quiet fan operation.
Chapter 4
•
•
•
•
•
4-6
Standard: adjusts fan speed in a moderate pattern.
Turbo: maximizes the fan speed for the best cooling effect.
Intelligent: automatically adjusts the CPU fan speed according to the ambient
temperature.
Stable: fixes the CPU fan speed to avoid noise caused by the unsteady fan rotation. The
fan will speed up when the temperature exceeds 70ºC.
User: Allows you to configure the CPU fan profile under certain limitations.
Chapter 4: Software support
4.3.5
ASUS TurboV
ASUS TurboV allows you to easily overclock without exiting or rebooting the OS, and set up
the best O.C. settings for different scenarios.
Refer to the CPU documentation before adjusting CPU voltage settings. Setting a high
voltage may damage the CPU permanently, and setting a low voltage may make the
system unstable.
•
•
•
Only Intel® Core™ i7 Extreme Edition processors support the CPU Ratio function.
For system stability, all changes made in ASUS TurboV will not be saved to BIOS
settings and will not be kept on the next system boot. Use the Save Profile function
to save your customized overclocking settings and manually load the profile after
Windows starts.
For system stability, set ASUS EPU to High Performance Mode while using ASUS
TurboV.
Launching ASUS TurboV
1.
2.
Install the ASUS TurboV utility from the motherboard support DVD.
Click Start > All Programs > ASUS > TurboV > TurboV.
Save the current settings as a new profile
Target settings
Default
settings
Voltage
Adjustment
bars
Click to show
more settings
Applies all changes immediately
•
•
•
Chapter 4
Adjusts CPU
core ratio
Advanced
CPU and
chipset voltage
settings
Undoes all changes without applying
Set the CPU Ratio Setting item in BIOS to [Auto] before using the CPU Ratio function
in TurboV. See Chapter 3 for details.
For advanced overclock ability, adjust first the BIOS items, and then proceed more
detailed adjustments using TurboV.
Refer to the software manual in the support DVD or visit the ASUS website at
www.asus.com for detailed software configuration.
ASUS P6X58D Premium
4-7
4.3.6
ASUS Express Gate SSD
ASUS Express Gate SSD is an instant-on environment that gives you quick access to
the Internet, Skype, and viewing your pictures. Within a few seconds of powering on your
computer, you will be at the Express Gate SSD menu where you can start the web browser,
Skype, or other Express Gate SSD applications. It’s a built-in utility, you can enjoy it without
installation.
Notices about ASUS Express Gate SSD
•
ASUS Express Gate SSD supports SATA devices in IDE mode only. See chapter 3 for
BIOS setup details.
•
ASUS Express Gate SSD supports SATA devices connected to motherboard
chipset-controlled onboard SATA ports only. All onboard extended SATA ports
and external SATA ports are NOT supported. See chapter 2 for the exact location of
onboard SATA ports.
•
ASUS Express Gate SSD supports file uploading from ODD and USB drives and
downloading to USB drives only.
•
Your monitor must support the screen resolution of 1024 x 768, or ASUS Express
Gate will be skipped during the booting process, and the existing OS will be launched
directly.
•
Installation of at least 1GB system memory is recommended for better performance.
The First Screen
Express Gate SSD’s first screen appears within a few seconds after you power on the computer.
Click any of the application
icons to enter Express Gate SSD
environment and launch the
selected application
Turn off the computer
Chapter 4
Continue booting to existing OS when the timer
above the Exit icon counts down to zero (0); click to
immediately enter existing OS
4-8
•
To enter the motherboard BIOS setup program, click Exit on the Express Gate First
Screen, and then press the <Del> key during POST.
•
Refer to the software manual in the support DVD or click
environment for detailed software instructions.
•
Express Gate complies with the OpenGL standard. Refer to http://support.asus.com
for Express Gate source codes.
in the Express Gate
Chapter 4: Software support
4.3.7
Audio configurations
The Realtek audio CODEC provides 8-channel audio capability to deliver the ultimate audio
experience on your computer. The software provides Jack-Sensing function, S/PDIF Out
support, and interrupt capability. The CODEC also includes the Realtek® proprietary UAJ®
(Universal Audio Jack) technology for all audio ports, eliminating cable connection errors and
giving users plug and play convenience.
®
Follow the installation wizard to install the Realtek® Audio Driver from the support CD/DVD
that came with the motherboard package.
If the Realtek audio software is correctly installed, you will find
the Realtek HD Audio Manager icon on the taskbar. Doubleclick on the icon to display the Realtek HD Audio Manager.
A.
Realtek HD Audio Manager
Realtek HD Audio Manager for Windows® Vista™
Set default device
button
Minimize
button
Exit button
Device
advanced
settings
Configuration
option tabs
Connector
settings
Analog
and digital
connector
status
Control
settings
window
Information
button
Realtek HD Audio Manager for Windows XP
Configuration
options
Control settings
window
Exit button
Minimize button
Chapter 4
B.
Information button
ASUS P6X58D Premium
4-9
4.4
RAID configurations
The motherboard comes with the Intel® ICH10R Southbridge controller that allows you to
configure Serial ATA hard disk drives as RAID sets. The motherboard supports the following
RAID configurations: RAID 0, RAID 1, RAID 10 and RAID 5.
4.4.1
•
You must install Windows® XP Service Pack 2 or later versions before using Serial
ATA hard disk drives. The Serial ATA RAID feature is available only if you are using
Windows® XP SP2 or later versions.
•
Due to Windows® XP / Vista limitation, a RAID array with the total capacity over 2TB
cannot be set as a boot disk. A RAID array over 2TB can only be set as a data disk
only.
•
If you want to install a Windows® operating system to a hard disk drive included in a
RAID set, you have to create a RAID driver disk and load the RAID driver during OS
installation. Refer to section 4.5 Creating a RAID driver disk for details.
RAID definitions
RAID 0 (Data striping) optimizes two identical hard disk drives to read and write data in
parallel, interleaved stacks. Two hard disks perform the same work as a single drive but at a
sustained data transfer rate, double that of a single disk alone, thus improving data access
and storage. Use of two new identical hard disk drives is required for this setup.
RAID 1 (Data mirroring) copies and maintains an identical image of data from one drive to
a second drive. If one drive fails, the disk array management software directs all applications
to the surviving drive as it contains a complete copy of the data in the other drive. This RAID
configuration provides data protection and increases fault tolerance to the entire system. Use
two new drives or use an existing drive and a new drive for this setup. The new drive must be
of the same size or larger than the existing drive.
RAID 5 stripes both data and parity information across three or more hard disk drives. Among
the advantages of RAID 5 configuration include better HDD performance, fault tolerance, and
higher storage capacity. The RAID 5 configuration is best suited for transaction processing,
relational database applications, enterprise resource planning, and other business systems.
Use a minimum of three identical hard disk drives for this setup.
RAID 10 is data striping and data mirroring combined without parity (redundancy data) having
to be calculated and written. With the RAID 10 configuration you get all the benefits of both
RAID 0 and RAID 1 configurations. Use four new hard disk drives or use an existing drive
and three new drives for this setup.
Chapter 4
Intel® Matrix Storage. The Intel® Matrix Storage technology supported by the ICH10R chip
allows you to create a RAID 0, RAID 1, RAID 5, and RAID 10 functions to improve both
system performance and data safety. You can also combine two RAID sets to get higher
performance, capacity, or fault tolerance provided by the difference RAID function. For
example, RAID 0 and RAID 1 set can be created by using only two identical hard disk drives.
4-10
Chapter 4: Software support
4.4.2
Installing Serial ATA hard disks
The motherboard supports Serial ATA hard disk drives. For optimal performance, install
identical drives of the same model and capacity when creating a disk array.
To install the SATA hard disks for a RAID configuration:
1.
Install the SATA hard disks into the drive bays.
3.
Connect a SATA power cable to the power connector on each drive.
2.
Connect the SATA signal cables.
4.4.3
Setting the RAID item in BIOS
You must enable the RAID function in the BIOS Setup before creating RAID set(s) using
SATA HDDs. To do this:
1.
2.
3.
4.
Enter the BIOS Setup during POST.
Go to the Main menu > Storage Configuration, and then press <Enter>.
Set the Configure SATA as item to [RAID].
Save your changes, and then exit the BIOS Setup.
Refer to Chapter 3 for details on entering and navigating through the BIOS Setup.
Due to chipset limitation, when set any of SATA ports to RAID mode, all SATA ports run at
RAID mode together.
4.4.4
Intel® Matrix Storage Manager option ROM utility
To enter the Intel® Matrix Storage Manager option ROM utility:
1.
2.
Turn on the system.
During POST, press <Ctrl> + <I> to display the utility main menu.
Intel(R) Matrix Storage Manager option ROM v8.0.0.1038 ICH10R wRAID5
Copyright(C) 2003-08 Intel Corporation. All Rights Reserved.
1. Create RAID Volume
2. Delete RAID Volume
[ MAIN MENU ]
3. Reset Disks to Non-RAID
4. Exit
[ DISK/VOLUME INFORMATION ]
RAID Volumes:
None defined.
Physical Disks:
Port Drive Model
0
ST3160812AS
1
ST3160812AS
2
ST3160812AS
3
ST3160812AS
[↑↓]-Select
ASUS P6X58D Premium
Serial #
9LS0HJA4
9LS0F4HL
3LS0JYL8
9LS0BJ5H
[ESC]-Exit
Size
149.0GB
149.0GB
149.0GB
149.0GB
Chapter 4
Type/Status(Vol ID)
Non-RAID Disk
Non-RAID Disk
Non-RAID Disk
Non-RAID Disk
[ENTER]-Select Menu
4-11
The navigation keys at the bottom of the screen allow you to move through the menus
and select the menu options.
The RAID BIOS setup screens shown in this section are for reference only and may not
exactly match the items on your screen.
The utility supports maximum four hard disk drives for RAID configuration.
Creating a RAID set
To create a RAID set:
1.
From the utility main menu, select 1. Create RAID Volume and press <Enter>. The
following screen appears:
Intel(R) Matrix Storage Manager option ROM v8.0.0.1038 ICH10R wRAID5
Copyright(C) 2003-08 Intel Corporation. All Rights Reserved.
[ CREATE VOLUME MENU ]
Name:
RAID Level:
Disks:
Strip Size:
Capacity:
Volume0
RAID0(Stripe)
Select Disks
128KB
0.0
GB
Create Volume
[ HELP ]
Enter a unique volume name that has no special characters and is
16 characters or less.
[↑↓]Change
[TAB]-Next
[ESC]-Previous Menu
[ENTER]-Select
2.
Enter a name for the RAID set and press <Enter>.
4.
When the Disks item is selected, press <Enter> to select the hard disk drives you want
to include in the RAID set. The SELECT DISKS screen appears:
3.
When the RAID Level item is selected, press the up/down arrow key to select a RAID
level to create, and then press <Enter>.
[ SELECT DISKS ]
Chapter 4
Port
0
1
2
3
Drive Model
ST3160812AS
ST3160812AS
ST3160812AS
ST3160812AS
Serial #
9LS0HJA4
9LS0F4HL
3LS0JYL8
9LS0BJ5H
Size
149.0GB
149.0GB
149.0GB
149.0GB
Status
Non-RAID
Non-RAID
Non-RAID
Non-RAID
Disk
Disk
Disk
Disk
Select 2 to 6 disks to use in creating the volume.
[↑↓]-Prev/Next [SPACE]-SelectDisk [ENTER]-Done
4-12
Chapter 4: Software support
5.
6.
Use the up/down arrow key to select a drive, and then press <Space> to select. A small
triangle marks the selected drive. Press <Enter> after completing your selection.
Use the up/down arrow key to select the stripe size for the RAID array (for RAID 0, 10
and 5 only),and then press <Enter>. The available stripe size values range from 4KB
to 128KB. The following are typical values:
RAID 0: 128KB
RAID 10: 64KB
RAID 5: 64KB
We recommend a lower stripe size for server systems, and a higher stripe size for
multimedia computer systems used mainly for audio and video editing.
7.
8.
When the Capacity item is selected, enter the RAID volume capacity that you want
and press <Enter>. The default value indicates the maximum allowed capacity.
When the Create Volume item is selected, press <Enter>. The following warning
message appears:
WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST.
Are you sure you want to create this volume? (Y/N):
Press <Y> to create the RAID volume and return to the main menu, or <N> to go back
to the CREATE VOLUME menu.
Chapter 4
9.
ASUS P6X58D Premium
4-13
Deleting a RAID set
Take caution when deleting a RAID set. You will lose all data on the hard disk drives when
you delete a RAID set.
To delete a RAID set:
1.
From the utility main menu, select 2. Delete RAID Volume and press <Enter>. The
following screen appears:
Intel(R) Matrix Storage Manager option ROM v8.0.0.1038 ICH10R wRAID5
Copyright(C) 2003-08 Intel Corporation. All Rights Reserved.
[ DELETE VOLUME MENU ]
Name
Volume0
Level
RAID0(Stripe)
Drives
2
Capacity
298.0GB
Status
Normal
Bootable
Yes
[ HELP ]
Deleting a volume will reset the disks to non-RAID.
WARNING: ALL DISK DATA WILL BE DELETED.
[↑↓]-Select
2.
[ESC]-Previous Menu
[DEL]-Delete Volume
Use the up/down arrow key to select the RAID set you want to delete, and then press
<Del>. The following warning message appears:
[ DELETE VOLUME VERIFICATION ]
ALL DATA IN THE VOLUME WILL BE LOST!
Are you sure you want to delete volume “Volume0”? (Y/N):
3.
Press <Y> to delete the RAID set and return to the utility main menu, or press <N> to
return to the DELETE VOLUME menu.
Exiting the Intel® Matrix Storage Manager
Chapter 4
To exit the utility:
1.
From the utility main menu, select 4. Exit, and then press <Enter>. The following
warning message appears:
[ CONFIRM EXIT ]
Are you sure you want to exit? (Y/N):
2.
4-14
Press <Y> to exit or press <N> to return to the utility main menu.
Chapter 4: Software support
4.5
Creating a RAID driver disk
A floppy disk with the RAID driver is required when installing Windows® XP operating system
on a hard disk drive that is included in a RAID set. For Windows® Vista or later operating
systems, use either a floppy disk or a USB flash drive with the RAID driver.
4.5.1
•
The motherboard does not provide a floppy drive connector. You have to use a
USB floppy disk drive when creating a SATA RAID driver disk.
•
Windows® XP may not recognize the USB floppy disk drive due to Windows® XP
limitation. To work around this OS limitation, refer to section 4.5.4 Using a USB
floppy disk drive.
Creating a RAID driver disk without entering the OS
To create a RAID/SATA driver disk without entering the OS:
1.
Boot your computer.
3. Set the optical drive as the primary boot device.
2.
4. 5.
6. 7. 8. Press <Del> during POST to enter the BIOS setup utility.
Insert the support DVD into the optical drive.
Save changes and exit BIOS.
When the Make Disk menu appears, press <a> or <b> to create a 32/64bit
Intel ICH10R RAID driver disk.
Insert a formatted floppy disk into the USB floppy disk drive, then press <Enter>.
Follow the succeeding screen instructions to complete the process.
4.5.2
Creating a RAID driver disk in Windows®
To create a RAID driver disk in Windows®:
Start Windows®.
2. Plug the USB floppy disk drive and insert a floppy disk.
4. Go to the Make Disk menu, and then click Intel ICH10R 32/64 bit RAID Driver Disk to
create an Intel® ICH10R RAID driver disk.
3. 5. 6. Place the motherboard support DVD into the optical drive.
Select USB floppy disk drive as the destination disk.
Follow the succeeding screen instructions to complete the process.
Chapter 4
1.
Write-protect the floppy disk to avoid a computer virus infection.
ASUS P6X58D Premium
4-15
4.5.3
Installing the RAID driver during Windows® OS installation
To install the RAID driver in Windows® XP:
1. 2. 3.
4. During the OS installation, the system prompts you to press the F6 key to install
third-party SCSI or RAID driver.
Press <F6>, and then insert the floppy disk with RAID driver into the USB floppy disk
drive.
When prompted to select the SCSI adapter to install, ensure that you select Intel(R)
SATA RAID Controller (Desktop ICH10R).
Follow the succeeding screen instructions to complete the installation.
To install the RAID driver in Windows® Vista™:
1. 2. 3. Insert the floppy disk/USB device with RAID driver into the USB floppy disk drive/USB
port.
During the OS installation, select Intel(R) SATA RAID Controller (Desktop ICH10R).
Follow the succeeding screen instructions to complete the installation.
Chapter 4
4-16
Chapter 4: Software support
4.5.4
Using a USB floppy disk drive
Due to OS limitation, Windows® XP may not recognize the USB floppy disk drive when you
install the RAID driver from a floppy disk during the OS installation.
To solve this issue, add the USB floppy disk drive’s Vendor ID (VID) and Product ID (PID) to
the floppy disk containing the RAID driver. Refer to the steps below:
1.
Using another computer, plug the USB floppy disk drive, and insert the floppy disk
containing the RAID driver.
2.
Right-click My Computer on the
Windows® desktop or start menu,
and then select Manage from the
pop-up window.
or
3.
Select Device Manager. From the
Universal Serial Bus controllers,
right-click xxxxxx USB Floppy, and
then select Properties from the pop-up
window.
The name of the USB floppy disk
drive varies with different vendors.
4.
Click Details tab. The Vendor ID (VID)
and Product ID (PID) are displayed.
5.
Browse the contents of the RAID driver
disk to locate the file txtsetup.oem.
Double-click the file. A window appears,
allowing you to select the program for
opening the oem file.
ASUS P6X58D Premium
Chapter 4
6.
4-17
7.
Use Notepad to open the file.
8.
Find the [HardwareIds.scsi.iaAHCI_ICH10R] and
[HardwareIds.scsi.iastor_ICH8RICH9RICH10RDO] sections in the txtsetup.oem file.
9.
Type the following line to the bottom of the two sections:
id = “USB\VID_xxxx&PID_xxxx”, “usbstor”
Add the same line to both sections.
The VID and PID vary with different vendors.
10. Save and exit the file.
Chapter 4
4-18
Chapter 4: Software support
Chapter 5
Chapter 5:
Multiple GPU technology support
5.1
ATI® CrossFireX™ technology
The motherboard supports the ATI® CrossFireX™ technology that allows you to install
multi-graphics processing units (GPU) graphics cards. Follow the installation procedures in
this section.
5.1.1
•
•
•
•
Requirements
In Dual CrossFireX mode, you should have two identical CrossFireX-ready graphics
cards or one CrossFireX-ready dual-GPU graphics card that are ATI® certified.
In Triple CrossFireX mode, you should have three identical CrossFireX-ready graphics
cards that are ATI® certified.
Ensure that your graphics card driver supports the ATI CrossFireX technology.
Download the latest driver from the AMD website (www.amd.com).
Ensure that your power supply unit (PSU) can provide at least the minimum power
required by your system. See page 2-35 for details.
5.1.2
•
We recommend that you install additional chassis fans for better thermal environment.
•
The ATI Triple CrossFireX technology is currently supported by Windows® Vista
operating system only.
•
Visit the ATI Game website (http://game.amd.com) for the latest certified graphics card
and the supported 3D application list.
Before you begin
For ATI CrossFireX to work properly, you have to uninstall all existing graphics card drivers
before installing ATI CrossFireX graphics cards to your system.
To uninstall existing graphics card drivers:
1.
2.
Close all current applications.
For Windows XP, go to Control Panel > Add/Remove Programs.
For Windows Vista, go to Control Panel > Programs and Features.
3.
Select your current graphics card driver/s.
5.
Turn off your computer.
4.
For Windows XP, select Add/Remove.
For Windows Vista, select Uninstall.
ASUS P6X58D Premium
5-1
5.1.3
Installing two CrossFireX™ graphics cards
The following pictures are for reference only. The graphics cards and the motherboard
layout may vary with models, but the installation steps remain the same.
Chapter 5
1.
2.
3.
4.
Prepare two CrossFireX-ready graphics
cards.
Insert the two graphics card into the
PCIEX16 slots. If your motherboard
has more than two PCIEX16 slots,
refer to Chapter 2 in this user manual
for the locations of the PCIEX16 slots
recommended for multi-graphics card
installation.
Ensure that the cards are properly
seated on the slots.
Align and firmly insert the CrossFireX
bridge connector to the goldfingers on
each graphics card. Ensure that the
connector is firmly in place.
CrossFireX bridge
5. 6.
5-2
CrossFireX
goldfingers
Connect two independent auxiliary power
sources from the power supply to the two
graphics cards separately.
Connect a VGA or a DVI cable to the
graphics card.
Chapter 5: Multiple GPU technology support
5.1.4
2.
3.
Prepare three CrossFireX-ready graphics cards.
Insert the three graphics card into the PCIEX16 slots. If your motherboard has more
than three PCIEX16 slots, refer to Chapter 2 in this user manual for the locations of the
PCIEX16 slots recommended for multi-graphics card installation.
Ensure that the cards are properly seated on the slots.
4.
Align and firmly insert the two CrossFireX
bridge connectors to the goldfingers
on each graphics card. Ensure that the
connectors are firmly in place.
5. Connect three independent auxiliary
power sources from the power supply to
the three graphics cards separately.
6.
Chapter 5
1.
Installing three CrossFireX™ graphics cards
Connect a VGA or a DVI cable to the
graphics card.
ASUS P6X58D Premium
5-3
5.1.5
Installing the device drivers
Refer to the documentation that came with your graphics card package to install the device
drivers.
Chapter 5
5.1.6
•
Ensure that your PCI Express graphics card driver supports the ATI® CrossFireX™
technology. Download the latest driver from the AMD website (www.amd.com).
•
If you are using a Triple CrossFireX system, ensure to install the ATI Catalyst® driver
under Windows® Vista™ OS. The ATI Triple CrossFireX technology is currently
supported by Windows® Vista™ only.
Enabling the ATI® CrossFireX™ technology
After installing your graphics cards and the device drivers, enable the CrossFireX™ feature
through the ATI Catalyst™ Control Center in Windows environment.
Launching the ATI Catalyst Control Center
To launch the ATI Catalyst Control Center:
5-4
1.
Right-click on the Windows® desktop and select
Catalyst(TM) Control Center. You can also
right-click the ATI icon in the Windows notification
area and select Cayalist Control Center.
2.
The Catalyst Control Center Setup
Assistant appears when the system
detects the existance of multi-graphics
cards. Click Go to continue to the
Catalyst Control Center Advanced
View window.
Chapter 5: Multiple GPU technology support
1.
2.
3.
4.
In the Catalyst Control Center window,
click Graphics Settings > CrossFireX >
Configure.
2
From the Graphics Adapter list, select
the graphics card to act as the display
GPU.
Select Enable CrossFireX.
Click Apply, and then click OK to exit
the window.
Chapter 5
Enabling Dual CrossFireX technology
3
1
4
Enabling Triple CrossFireX technology
1.
2.
3.
4.
5.
In the Catalyst Control Center window,
click Graphics Settings > CrossFireX >
Configure.
2
From the Graphics Adapter list, select
the graphics card to act as the display
GPU.
Select Enable CrossFireX.
From the list, select the appropriate GPU
combination to apply the CrossFireX
technology.
Click Apply, and then click OK to exit
the window.
ASUS P6X58D Premium
3
1
4
5
5-5
5.2
NVIDIA® SLI™ technology
The motherboard supports the NVIDIA® SLI™ (Scalable Link Interface) technology that
allows you to install multi-graphics processing units (GPU) graphics cards. Follow the
installation procedures in this section.
Chapter 5
5.2.1
•
•
•
•
5-6
Requirements
In Dual SLI mode, you should have two identical SLI-ready graphics cards that are
NVIDIA® certified.
In Triple SLI mode, you should have three identical SLI-ready graphics cards that are
NVIDIA® certified.
Ensure that your graphics card driver supports the NVIDIA SLI technology. Download
the latest driver from the NVIDIA website (www.nvidia.com).
Ensure that your power supply unit (PSU) can provide at least the minimum power
required by your system. See page 2-35 for details.
•
We recommend that you install additional chassis fans for better thermal environment.
•
The NVIDIA Triple SLI technology is supported by Windows® Vista™ operating system
only.
•
Visit the NVIDIA zone website (http://www.nzone.com) for the latest certified graphics
card and supported 3D application list.
Chapter 5: Multiple GPU technology support
5.2.2
Installing two SLI-ready graphics cards
1. 2.
3.
4.
5. 6.
Chapter 5
The following pictures are for reference only. The graphics cards and the motherboard
layout may vary with models, but the installation steps remain the same.
Prepare two SLI-ready graphics cards.
Insert the two graphics card into the
PCIEX16 slots. If your motherboard
has more than two PCIEX16 slots,
refer to Chapter 2 in this user manual
for the locations of the PCIEX16 slots
recommended for multi-graphics card
installation.
Ensure that the cards are properly seated
on the slots.
Align and firmly insert the SLI bridge
connector to the goldfingers on each
graphics card. Ensure that the connector
is firmly in place.
Connect two independent auxiliary power
sources from the power supply to the two
graphics cards separately.
Connect a VGA or a DVI cable to the
graphics card.
SLI bridge
Goldfingers
ASUS P6X58D Premium
5-7
5.2.3
1. 2.
Chapter 5
3.
4.
5. 6.
Installing three SLI-ready graphics cards
Prepare three SLI-ready graphics cards.
Insert the three graphics card into the
PCIEX16 slots. If your motherboard
has more than two PCIEX16 slots,
refer to Chapter 2 in this user manual
for the locations of the PCIEX16 slots
recommended for multi-graphics card
installation.
Ensure that the cards are properly
seated on the slots.
Align and firmly insert the 3-Way SLI
bridge connector to the goldfingers on
each graphics card. Ensure that the
connector is firmly in place.
Connect three independent auxiliary
power sources from the power supply to
the three graphics cards separately.
Connect a VGA or a DVI cable to the
graphics card.
3-Way SLI bridge
5-8
Chapter 5: Multiple GPU technology support
5.2.4
Installing the device drivers
5.2.5
•
Ensure that your PCI Express graphics card driver supports the
NVIDIA® SLI™ technology. Download the latest driver from the NVIDIA
website (www.nvidia.com).
•
If you are using a Triple SLI system, ensure to install the NVIDIA® 3-way
SLI driver under Windows® Vista™. The NVIDIA 3-way SLI technology is
supported by Windows® Vista™ only.
Chapter 5
Refer to the documentation that came with your graphics card package to install the device
drivers.
Enabling the NVIDIA® SLI™ technology
After installing your graphics cards and the device drivers, enable the SLI feature in NVIDIA®
Control Panel under the Windows® Vista™ operating system.
Launching the NVIDIA Control Panel
You can launch the NVIDIA Control Panel by the following two methods:
A.
Right click on the empty space of the Windows®
desktop and select NVIDIA Control Panel.
The NVIDIA Control Panel window appears (See Step
B5 on page 5-11).
B1. If you cannot see the NVIDIA Control Panel item in
step (A), select Personalize.
ASUS P6X58D Premium
5-9
B2. From the Personalization window,
select Display Settings.
Chapter 5
B3. From the Display Settings dialog box, click
Advanced Settings.
B4. Select the NVIDIA GeForce tab, and then
click Start the NVIDIA Control Panel.
5-10
Chapter 5: Multiple GPU technology support
Chapter 5
B5. The NVIDIA Control Panel window appears.
Enabling Dual SLI settings
From the NVIDIA Control Panel window, select Set
SLI Configuration. Click Enable SLI and set the
display for viewing SLI rendered content. When
done, click Apply.
Enabling Triple SLI settings
1.
From the NVIDIA Control Panel window,
select Set SLI Configuration, and then click
Enable 3-way NVIDIA SLI. When done,
click Apply.
2.
Select the 3D Settings tab and enable the
Show SLI Visual Indicators item.
When this item is enabled, a green bar
appears on the left side of the screen while
3D demonstrations are rendered, indicating
the 3-way SLI status.
ASUS P6X58D Premium
5-11
Chapter 5
5-12
Chapter 5: Multiple GPU technology support
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising