USER MANUAL (English)
VIDEO DOOR PHONE SYSTEM
Item No. : 13515 & 13516
Manual
Monitor
1
2
3
4
The designs and specifications of this manual can be changed without
notification to the customer/user. All copyrights and interpretation rights
are reserved to Entryvue.
Memory
Playback
About
Monitor
Album
Intercom
User Setup
Multimedia
Close
03/15/2011 Fri.10:12 AM
Version2.0.1.1.3.28
CONTENTS
CONTENTS
1. Parts and Functions
1. Parts and Functions - - - - - - - - - - - - - - - - - - - - - 1
2. Monitor Mounting - - - - - - - - - - - - - - - - - - - - - - 1
Screen
Indicator
Microphone
Manual
Monitor
3. Operation Instructions - - - - - - - - - - - - - - - - - - - 2
Memory
Playback
4. Basic Setup Instructions - - - - - - - - - - - - - - - - - - 4
Intercom
Monitor
User Setup
Album
About
UNLOCK Button
Multimedia
TALK/MON Button
Close
MENU Button
03/15/2011 Fri.10:12 AM
5. Built-in Memory and SD Card - - - - - - - - - - - - - - 7
6. Specification - - - - - - - - - - - - - - - - - - - - - - - - - - 9
Mounting Hook
Speaker
Connection Port
BT1
BT2
EH
GND
VD
DIPS
ON
123456
L1
L2
Mounting Hook
SD card slot
145~160 cm
2. Monitor Mounting
Please read this manual carefully before using the
product, and keep it well.
● Use the screws to fix the Mounting Bracket on the wall.(accessories include a
Bracket, two 4X25 screws (use to fasten the Mounting Bracket), 2 wire cables (use
to connect with Monitor)).
● Connect the system correctly. then hang the Monitor on the Mounting Bracket
firmly.
-1-
Entrance Monitoring
3. Operation Instructions
How to Enter Main Menu
MENU button ) in standby mode, a full
● Touch the screen anywhere (or press
screen calendar will be showed.
MENU button again) to enter main menu.
● Touch the screen again (or press
03/15/2011
Manual
Monitor
Fri.
10:12
Memory
Playback
About
Monitor
Album
Intercom
User Setup
Multimedia
● Press CALL button on door station. The monitor rings, and the visitor's image will be
seen on screen. If nobody answers the call, the screen will turn off in 30 seconds automatically.
-2-
3
2
Camera 2
4
Camera 3
Camera 4
Monitor
Time
Home
03/15/2011 Fri.10:12 AM
Station or CCTV camera you want. Press
Home icon to exit and enter main menu page.
Intercom Function
● Intercom Call by namelist : User in one apartment can call other apartments in the
Intercom item on main menu page , then touch
Intercom
system. Touch
by Namelist icon (the namelist will be created automatically by the system). Select
Dial Number icon to call. Press
a name on the screen then touch
icon to
Dial Number icon again to redial)
enter last/next name list page. (Touch
1:1
Standard
Screen
-Name List[0001] Jim,Zhang
[0002] Calo,Liu
[0003] Jacko,Zhang
[0004] Jana,Qiao
[0005] Hebe,Zhang
[0006] Tony,Li
Unlock
Talk
Intercom
by Namelist
Inner Call
Direct Call
Guard Unit
Capture
Home
Door Release
● During the conversation, press UNLOCK Button or touch
door. (if two locks are connected to door camera, touch
the second lock )
1
Camera 1
Close
03/15/2011 Fri.10:12 AM
Answering a Door Call
TALK / MON Button or touch
● Press
icon, you can talk with the visitor for
90 seconds. During talking state, press
TALK / MON Button again or press
icon
again to end the conversation. If the system
connects two or more Monitors, pick up any
Monitor, the others will be automatically shut
off.
Press
TALK/MON button on monitor in
Monitor icon on
standby mode, or touch
main menu.the screen will display the view
of the Outdoor Station. During monitoring,
Manual Monitor icon to get into the
touch
camera switching mode, (or directly touch
Manual Monitor icon on main menu page).
if multi Door Stations are installed, you can
press the camera 1/2/3/4 to monitor the Door
icon to unlock the
unlock 2nd icon to release
Home
Last
Next
Dial
Number
Close
03/15/2011 Fri.10:12 AM
● Inner Call : If multi Monitors are installed in one user, select and press the Inner Call
item, the other Monitors will ring at the same time, whichever Monitor answers the
call, conversation is started, and the other monitors will stop ringing at the same time.
● Direct Dial Guard unit : A Monitor can be assigned as Guard Unit Monitor; when the
Guard Unit Monitor answers the call, conversation with the guard person is started.
-3-
4. Basic Setup Instructions
Night Ring
Volume
Ring Tone Setting
Night Ring
Volume
4
4
Exit&Save
User Setup icon on main menu
● Touch
page to enter call tone setting screen, touch
Door station call tone/intercom call tone/
door bell call tone, 12 pieces ring tones will
be displayed , Choose a ring tone which
you want, then touch
icon to save and
exit, the ring tone will be performed. Or
touch
Night Ring
Volume
Ring
Volume
Exit&Save
Adjust +
Adjust -
Exit&Save
Carman
Going Home
Ding Dong
Congratulate
Rhythm of the rain
Do Re Me
For Elise
Happy Birthday
Sonatine
Jingle Bell
Edelweiss
Telephone Ring
Exit&Unsave
icon to unsave and exit.
Ring Volume Setting
Adjust +
Exit&Unsave
Exit&Unsave
Door Station
Call Tone
7
Adjust -
Monitor Time Setting
Manual Monitor icon to enter next page.then
● Enter main menu page,thenTouch
Monitor Time icon to enter monitor time setting page.
press
● Input digitals by pressing the digital keypad, and press * icon to change the setting
location,and press # icon to save. Settings will be performed immediately, press
icon to return last page .
Ring Volume
Yo u c a n s e t a r i n g v o l u m e f o r d a y
time, 6:00 AM~8:00 PM is the day time by
Camera 1
Adjust -
7
Camera 3
Monitor time set
min:[01] sec:[30]
Camera 4
Monitor
Time
6
Home
03/15/2011 Fri.10:12 AM
1
4
2
5
3
6
7
8
0
9
#
*
4
Exit&Save
4
3
Ring Volume icon to enter Ring
touch
Volume page, Use
icon to decrease/
increase the volume. Then touch
icon to
save and exit, or touch
icon to unsave
and exit.
Ring Volume
Camera 2
3
1 2
default, enter main menu page.then touch
User Setup icon to enter next page, and then
Cancel
Adjust +
Exit&Unsave
Unlock Parameter Setting
icon to enter next page.and then touch the
● Enter main menu page,then Touch
screen anywhere and hold for 3s to enter next menu.
Night Ring Volume
You can activate a ring volume for night time, 8:00 PM~6:00 AM is the night time by
default,if you don't want to be disturbed at night , you can set the volume to 0.Enter main
User Setup icon to enter next page, then touch
Night Ring
menu page, touch
icon to decrease/increase the
Volume icon to enter Night Ring Volume page, Use
Ring Volume icon to activate
volume.After setting a value you want, you should touch
the setting, after that the Ring Volume
icon will change to Night Ring Volume
icon. then touch
i c on to sav e and ex i t ni g ht ri ng v ol ume w i l l be perf ormed. or touc h
icon to unsave and exit.
Note: Touch
setting.
2
1
H/W
T3-753 a1.3
S/W:
V11.01008.00
Voltage:
--Local addr:
01.00
Unlock timing:
5s
Video standard:
Installer
setup
Cancel
Home
Night Ring Volume icon again, you can cancel the night ring volume
-4-
-5-
Device
Property
Caliber
TouchScreen
Installer setup icon,a digital
● Touch
keypad and installation setting will be
showed on screen.
● Input code number by touching the
digital keypad.According to the left
instructions, 8010 and 8011 are used
to set the unlock mode(0 and 1).
8021~8029 are used to set the unlock
time (1s~9s) .use
to cancel the
to save the setting.
input,and use
Touch
5. Built-in Memory and SD Card
Installation settings:
[0010]#:Remove all remote control
[0011]#:Add remote control
[8000]#:Set
[8001]#:Set
[8002]#:Set
[8003]#:Set
[8004]#:Set
[8005]#:Set
as
as
as
as
as
as
master unit 0
slaver unit 1
slaver unit 2
slaver unit 3
guard unit
not guard unit
[8010]#:Set lock mode to 0
[8011]#:Set lock mode to 1
[8021]#:Set
[8022]#:Set
[8023]#:Set
[8024]#:Set
[8025]#:Set
[8026]#:Set
[8027]#:Set
[8028]#:Set
[8029]#:Set
the
the
the
the
the
the
the
the
the
lock
lock
lock
lock
lock
lock
lock
lock
lock
time
time
time
time
time
time
time
time
time
of
of
of
of
of
of
of
of
of
1s
2s
3s
4s
5s
6s
7s
8s
9s
This Monitor has been equipped with a built-in memory (about 120 MB) together with a
SD card reader. Maximum 16 GB SD card can be supported.
Code Number:[----]
4
2
5
3
6
7
8
9
1
0
Cancel
icon to return last page .
Screen Setting
When the Monitor is in monitoring or
Adjust icon to
talking state, Press
enter screen setting page.Touch any item
Micro SD card
Brightness
color
5
to decrease
you want,then touch
or increase the value.Settings will be
performed immediately. Press
exit out the page.
Adjust -
scene
Adjust +
Talk Volume
Adjust Return
icon to
● The monitor can play photos and pictures.
● Photo frame function, each photo playing will last 5 seconds, More pictures in the
SD card, longer time for triggering the function, 800 pictures are supported in inner
memory. With 2G SD card, more than 30000 pictures can be supported.
● Must use T-views album software tool to transform the JPG format photos took by
digital camera to TVS format photos that can be viewed on Monitor.
Restore to Default
● The captured pictures will be saved in a folder named by date, note that the pictures
recording every day will be saved in different folders which automatically generated
every day.
The restore to default function allows
the user to recover the settings to factory
setting.Note that the restore to default
operation will not change the time setting
and the datas on buit-in memory or SD
card.
Door Station Intercom
Call tone
Call tone
Ring
Volume
Enter main menu page, then touch
User Setup icon to enter the setting
page, press Restore to default item, the
Home
Night Ring
Volume
DoorBell
Call tone
Clock
Refault to
Default
03/15/2011 Fri.10:12 AM
● The captured pictures in the built-in memory can be copied to the SD card, and you
should use T-views memo software tool to convert the pictures to JPG format that can
be seen on the computer. (select the pictures (press Ctrl+A to select all)->> click the
right key of the mouse ->>choose transfer selected to JPG item->>save the pictures on
computer)
● When the built-in memory is full, the oldest picture will be deleted to make room for
new record.
● The built-in memory can be formatted by the Monitor, but SD card cannot, you should
format the SD card on computer.
default settings will be loaded. press
Home icon to return to home screen page.
● Avoid to plug in/out the SD card when the monitor is under operation.
● Playing will be interrupted by the calling from outdoor station.
- 6-
-7-
Photo Frame
Picture Recording
Both Auto-Recording and Manual-Recording
are available.and Auto-Recording is default.
If receive a Call , after 3s, the monitor will
Photo Playing
DS1
00:03
Talking
1:1
Standard
Screen
Unlock
record automatically. or you can touch
Capture icon to record the visitor's image
manually.
Talk
Capture
Recording...
Home
Playing time setting
Record times Setting
You can setup Memo Options to choose
1/4/8 pictures memo. If 4/8 was chosen,
you will have 4/8 shots for each recording
operation, and every 1.5 seconds catch a
picture.
Record times: [ 1 ]
Multi Media icon on main menu
Touch
Memory
to enter next page, then touch
Options icon, a digital keypad will be showed
on the screen, you can only set the record
times for 1/4/8 by touching the digital
keypad. Touching other digitals are unvalid.
And press # icon to save. Settings will be
performed immediately, press
return last page.
Album icon on main menu to play the photos (must plug in SD card). It can be
Touch
played both manually and automatically, use your fingers to slide right or left on screen to
play last/next photo.
1
4
2
5
3
6
7
8
0
9
#
*
Cancel
Multi Media icon on main menu
Touch
Album
to enter next page, then touch
Options icon,a digital keypad will be showed
on the screen, then you can set the playing
time by touching the digital keypad to input
digitals and press * icon to change the
location, and press # icon to save. Settings
will be performed immediately, press
icon to return last page .
Album time set
min:[01] sec:[30]
1
4
2
5
3
6
7
8
0
9
#
*
Cancel
6. Specification
i c on to
Picture Playback
Memory Playback icon on main
Touch
menu, 4 pictures will be displayed in the
memo for each page. You can touch
or
to enter last or next picture memo, or
touch
icon to delete all pictures. And
you can zoom the picture on full screen by
Full Screen
Picture 4
Picture 3
Page UP
2010-9-30
004 2010-9-30
003
Page Down
Picture 2
2010-9-30
i c on , on f ul l sc reen mode, touc h
icon to preview last/next picture. Or
you can touch
icon to delete the picture
icon to return
you are previewing. Press
home screen page.
touch
-8-
Picture 1
002 2010-9-30
Power Supply :
DC 24V (supplied by Adaptor)
Power Consumption:
Standby 15mA; Working status 400mA
Monitor Screen:
7 Inch color TFT-LCD
Display Resolution:
800*3(RGB)*480 pixels
Built-in Memory:
120 MB
Picture Memo:
800pcs(inner memory),>30000pcs(2G SD card)
Monitor Dimension:
125(H)×225(W)×23(D)mm
Delete All
001
Home
-9-
Download PDF