GPS TRACKER
USER MANUAL
Preface
UU
Thank you for purchasing GPS Tracker.This manual shows how to operate the device smoothly and
correctly. Make sure to read this manual carefully before using this product. Please note that
specification and information are subject to changes without prior notice in this manual. Any change
will be integrated in the latest release. The manufacturer assumes no responsibility for any errors or
omissions in this document.
Content
1
Summary
------------------------------------------------------------------------------------------------1
3
2
Application
------------------------------------------------------------------------------------------------
3
Hardware Description
3.1 Front Face
3
--------------------------------------------------------------------------------
3
------------------------------------------------------------------------------------
3
3.2 Rear Face --------------------------------------------------------------------------------------
4
3.3 Interior
4
---------------------------------------------------------------------------------------
4
Specifications
----------------------------------------------------------------------------------------
5
SIM Card Installation ------------------------------------------------------------------
5
6
Startup
------------------------------------------------------------------------------------- -----------
7
7
Usage
--------------------------------------------------------------------------------------------------- --
8
Track Modes ---------------------------------- --------- -------- ----------------------------------------
7
7
8.1
Initialization
8.2
Password Setting ---------------------------------- --------- --------
7
8.3
Authorization ---------------------------------- --------- --------
8
8.4
Auto-Track ---------------------------------- --------- --------
9
8.5.
Tlimit Function---------------------------------- --------- --------
10
8.6.
GPS refurbish setting---------------------------------- --------- --------
10
8.7
Reboot remotely---------------------------------- --------- --------
10
8.8
---------------------------------- --------- --------
5
Geo-fence
---------------------------------- --------- --------
7
10
8.9 Movement Alert
---------------------------------- --------- --------
12
8.10 Overspeed Alert
---------------------------------- --------- --------
12
8.11
IMEI Checking
8.12
Time differences setting -----------------------------------------------------------------
8.13 SOS Function
8.14 SMSLINK
8.15 SMSONE
8.16
Low Battery Alert
------------------------------ --------- --------
--------------------------- --------- ------------------------------------- --------- -------------------------------------------------------------------------
8.19 Motion Sensor
8.20 SD Card Function
13
--------------------------------- --------- -------14
--------------------------------- --------- --------------------------------------14
----------------------------------------------------------------------------14
8.17 SMS Center
8.18 GSM ID
13
------------------------------ --------- ------------------------------------- --------- --------
8.21 Switch on/off
------------------------------ --------- ------------------------------------- --------- --------
15
15
15
15
15
16
9
Monitoring Mode
10
Talking Mode
11
GPRS Setting
12
Cautions
---------------------------------------------------------------------
18
13
Faults & Solutions
---------------------------------------------------------------------
18
------------------------------ --------- ---------------------------------------------------------------------------
2
16
16
17
1 Summary
Working based on existing GSM/GPRS network and GPS satellites, this product can locate and
monitor any remote targets by SMS or GPRS.
2 Applications
z
z
z
z
Protect the child / the elder / the disabled / pet,etc.
Businessmen safety.
Personnel management.
Covert tracking.
3 Hardware Description
3.1
Necklace holder
Front Face
Speaker
SOS Button
USB
Port,for
and
charging
Calling Button
GPS indicator light
GSM indicator light
Microphone
Working modes indicator
3.2 Rear Face
3
back cover
SD Card
SIM Card
3.3
Interior
Battery
4
4 Specs.
Content
Dim.
Weight
Network
Band
GPS chip
GSM/GPRS
module
GPS sensitivity
GPS accuracy
Specs.
80MM*56MM*22MM
50g
GSM/GPRS
850/900/1800/1900Mhz
SIRF3 chip
SIM900
-159dBm
5m
Reacquisition
Cold status
Warm status
Hot status
Time To First Fix
Battery
Battery
Standby
Storage Temp.
Operation Temp.
Humidity
DC5V
0.1s
45s
35s
1s
input
Chargeable changeable 3.7V 800mAh Li-ion battery
100hours
-40°C to +85°C
-20°C to +55°C
5%--95% non-condensing
5 SIM card installation
Make sure that there is no call transfer and call display is on, and PIN code off.
Step:
1. Open the Battery back cover
2.Open the SIM card slot and SD card slot,and put one SIM card and one SD card
5
Push ownwards to
open the cover
Pull leftwards and
insert the sim card
SD card is mounted , then
fasten the sim card rightwards
Fasten downwards ,make sure the SD
card is mounted
Put the battery
6
Fasten the cover
upwards
6 Startup
z Put the SIM card and SD card in place,insert the battery and the tracker is on.
The green led in the middle is power indicator, yellow led on left side is GSM indicator and blue led
on right side is GPS indicator. Green indicator will be flashing quickly, yellow indicator will be on for 2
seconds and blue led does not flash when the tracker is on. Green indicator will be on for one second
and off for three seconds in 20-30 seconds and yellow indicator will be on in 3 seconds’ interval which
means the tracker gets GSM signal already.
z Blue indicator will be flashing in 40-90 seconds which depends on the gps signal. Better
gps signal makes the blue indicator flash in short time and poor gps signal make it flash in
longer time. Blue indicator will not flash without gps signal.
7 Usage
The tracker has three working modes: TRACKING,MONITOR, double-way Communication.
8
8.1
Track Mode
Initialization
Send “begin+password”
to the product, it will reply “begin ok” and initialize all the settings
TO:13188888888
begin123456
From:13188888888
begin ok
8.2 Password Settiing
Send SMS “password+old password+space+new password” (default password: 123456), it will
reply “password ok”
7
TO:13188888888
password123456 888999
From:13188888888
password ok
8.3 Authorization
8.3.1 Send SMS “admin+ password+ space+ cell phone number”to set
the first authorized
number, it will reply “admin ok”, The other authorized numbers should be set by the first authorized
number.(PS: There are only 5 numbers able to be authorized)
TO:13188888888
admin123456 13751187524
From:13188888888
Admin ok
8.3.2 Send SMS noadmin+password+space+authorized number to cancel the authorized number.
8.3.3
When an authorized number send SMS or dials up the unit, it will reply as below:
Lat:
22.566901
long:
114.051258
speed:
0.00
14/08/09
imei:354776031555474 05 43.5 460 01 2533 720B
Lat: 22.566901 long: 114.051258== Coordinate
0.00
=== speed
14/08/09 06.54== Date&Time
F:3.85V
1 ==
== battery power
charging
Signal:F
0 means no charging
==== Full GPS signal L means weak GPS signal
354776031555474== IMEI
05=quantity of satellites ( from 3 to 12 )
8
06.54
F:3.85V,1,Signal:F
43.5=Altitude
460 = MCC Mobile Country Code
01 == MNC Mobile Network Code
2533= LAC Location area code
720B= Cell ID
8.4 Auto-Track
This function can make the tracker to send sms or gprs data in fixed interval for fixed times
8.4.1 Set up: Send SMS t030s005n+password to the unit, it will report the Geo-info at 30s’ interval
for 5 times.(s: second, m: minute, h: hour).You will receive a reply as “t030s005n OK” if the setting is
successful.The setting must be in 3 digits and at maximum 255 times
TO:13188888888
From:13188888888
T030s005n123456
T030s005n ok
8.4.2 Send SMS t030s***n+password to the unit, it will reply sms or gprs data for
unlimited times. You will receive a reply as “t030s***n OK” if the setting is successful.
TO:13188888888
TO:13188888888
T030s***n123456
T030s***n ok
8.4.3 Cancel: Send notn+password to delete the this function and it will reply “notn
ok”。
9
Remark: the interval must not be less than 5s.
8.5
TO:13188888888
TO:13188888888
Notn123456
Notn ok
Tlimit Function
8.5.1 Send “tlimit+password+ 50” (50M is the distance, 1-6000M set), reply “tlimit ok” (note: this
function is for auto-tracking function only. If the later position is 50M away with the position before, it
will send sms or gprs data. If less than 50M, it will not send in order to save SMS or gprs fee)
8.5.2
Send” tlimit+password+ 0” to cancel this function, the tracker will “tlimit ok”.
8.6 GPS-refresh setting
Send SMS “GpsAutoSearch+password+space+120”,it will reply “GpsAutoSearch ok”. The tracker
will search gps signal in 120s interval after setting this.
The refreshing time is between 120-600 seconds(120<interval <600)
Longer standby time for longer refreshing time and shorter standby time for shorter refreshing time.
8.7 Reboot remotely
Restart+passwored can be sent to the tracker to make the CPU restart when GPRS is stopped. The
tracker will turn off and restart in 3 minutes after sending this command.
8.8 Geo-fence
Set up a geo-fence around of the tracker and it will send message to the authorized numbers when the
tracker goes out of the area .
Notes: This function will be invalid if the unit moves outside of the district. You need to re-set it if you
want this function again. But if the tracker is in this district again, it will send alert again.
10
8.8.1 Send SMS stockade+password+space+longitude,latitude;longitude,latitude to the unit to
set the restricted district.
Remark :The first longitude & latitude is coordinate of the top left corner of the Geo-fence, while the
second longitude & latitude is the coordinate of the bottom right corner. It will reply stockade ok.
TO:13188888888
From:13188888888
stockade123456
114.124845e,22.56718
5n;114.777888e,22.555
666n
stockade ok
8.8.2 Cancel:Send SMS “nostockade+password” to deactivate this function.It will reply
“nostockade ok”.
TO:13188888888
From:13188888888
nostockade123456
nostockade ok
8.8.3 Response SMS format: stockade!+geo-info. It will alarm one time in each setting.
From:13188888888
lat: 22.566923 long: 114.051331
speed: 0.00 28/11/10 03:33
F:4.32V,0, Signal:F stockade
imei:359587011016261 05 41.5
460 01 2533 720B
11
8.9 Movement Alert
This function is used for the owner to get alarm when the tracker is moved.
8.9.1 Setup: Send SMS move+password to the unit to set the movement alert,it will reply move ok
TO:13188888888
From:13188888888
move123456
move ok
8.9.2 Cancel: Send SMS nomove+password to deactivate the movement alert,it will reply move ok
Response SMS format: :move!+geo-info. It will alarm one time in each setting.
From:13188888888
lat: 22.566923 long: 114.051331
speed: 0.00 28/11/10 03:33
F:4.32V,0,
Signal:F
moved
imei:359587011016261 05 41.5
460 01 2533 720B
8.10 Overspeed Alert:
This function is used to control the user’s driving speed.
8.10.1 Setup: Send SMS speed+password+space+ the speed, For example: speed123456 080,it
will reply” speed ok”
TO:13188888888
From:13188888888
speed123456 080
speed ok
12
8.10.2 Cancel: Send SMS”nospeed+password “to deactivate the overspeed alert,it will reply”
nospeed ok”
TO:13188888888
From:13188888888
nospeed123456
nospeed ok
Response SMS format: speed+080!+Geo-info (suppose the speed is 80km/h).
The tracker will check the speed in 3 minutes interval and alarm if it is overspeed.
From:13188888888
lat: 22.566923 long: 114.051331
speed: 0.00 28/11/10 03:33
F:4.32V,0,
Signal:F
speed
imei:359587011016261 05 41.5
460 01 2533 720B
Remark: It is recommended that the speed alarm is set at not less than 80km/h in order to make this
function accurate
8.11 IMEI Checking:
Send SMS” imei+password: to the unit,it will reply imei350001122222222 ok.
8.12
TO:13188888888
From:13188888888
imei23456
imei350001122222222 ok
Time Zone setting
Send “time zone+password + GMT time” ,reply “ time zone ok”. (note: if GMT time is positive, just
write the number. If time zone is negative, have to write”–“)
13
TO:13188888888
TO:13188888888
From:13188888888
Time zone123456 1
Time zone123456 -1
time zone ok
8.13 SOS Button
Press the SOS button for 3 second, it will send “help me !+ Geo-info” to all the authorized numbers
every 3 minutes. It will stop sending SOS sms or gprs data when one of the authorized numbers
reply SMS ”help me+password” to the tracker.
(note: the default software only send one SOS alert. Pls contact with our company for the firmware
with several SOS alerts)
8.14 SMS LINK
8.14.1
Send “smslinkone+password”, This product will reply a GOOGLE MAP link to admin numbers.The
position can be checked directly on the smartphone
Format:http://maps.google.com/maps?f=q&hl=en&q=22.567610,114.051227&speed: 0.00 12/11/10
14:36 F:4.22V Signal:F imei:012207000691839
8.14.2
Send “smslink+password”, it will reply “smslink OK” .The tracker will send the following SMS format
always.
http://maps.google.com/maps?f=q&hl=en&q=22.567610,114.051227&speed: 0.00 12/11/10 14:36
F:4.22V Signal:F imei:012207000691839
8.14.3
Send “smstext+password”, it will reply “smstext OK”. The tracker will reply normal SMS format for
this command
8.15 SMS ONE
Send “smsone+password”.The tracker will reply one SMS to admin number or gprs server. The
same function with real-time tracking, but no need to call to the tracker
14
8.16 Low Battery Alert
When the battery inside is less than 3.7 V, it will send low battery alert to admin number
8.17 SMS Center
8.17.1 Setup: Send SMS adminsms+password+space+cell phone number to SMS center.
The tracker will reply Geo-info & authorized number to sms center number
numbers call or send command to the tracker
even if the admin
8.17.2 Cancel: Send SMS noadminsms+password to cancel the SMS center.
Response SMS format: authorized number+Geo-info
Note:
◆The SMS message must in Text format, can’t be PDU format.
◆Please use the tracker outside for the first time so that It can get gps signal easily and quickly
8.18 GSM ID(this function can be add or delect for customization.)
GSM ID are in each sms or gprs data. The tracker can be found by GSM ID without gps signal. But the
customers have to ask their GSM operator for data base of the GSM ID.
8.19
Motion Sensor
This function is for protecting the vehicel or tracker when it is touched.
8.19.1 Setup: Send shake+password+space+1-10 to the tracker to set up this function.(1-10 means
the level of intensity)
8.19.2 Send SMS shake+password+space+1 is the least sensitivity . Have to shake the tracker
strongly to get the alert.
8.19.3 Send SMS shake+password+space+10 is the most sensitivity . Have to shake the tracker
slightly to get the alert
8.19.4 Cancel: Send SMS shake+password+space+0 to remove this function.
8.20 SD card function
A mini SD card can be put in the tracker’s SD card slot. The GPRS data can be saved in the SD card if
GPRS is off. It will send data to the GPRS server again when GPRS is on.
8.20.1 Setup: Send SMS sdlog+password+space+1 to activate the sd card-saving function
Cancel: Send SMS sdlog+password+space+0 to the tracker to deactivate this function
15
8.20.2 Setup: Send SMS readsd+password+space+1 to ask the tracker to send data in the SD card
to the GPRS server.
Cancel: Send SMS readsd+password+space+0 to ask the tracker to stop sending data in the SD
card to the server.
8.21 Switch on/off
8.21.1 Switch off
Press TALK button and SOS button for three seconds at same time, the green indicator will flash
quickly until it is off.
8.21.2 Switch on
Press TALK button and SOS button for three seconds at same time, the green indicator will flash
quickly until it is on.
9 Monitoring Mode(voice surveillance mode)
Send SMS monitor+password, the tracker repllies
through automatically when you call and listen to it
10
“monitor
ok”
then the tracker will get
Talking Mode
10.1 Send “talk+password”,it will reply “talk ok”, When authorized numbers call to the tracker, it
will ring several tones and get through automatically to double-communicate
10.2
Send “volume+password+60” ,it will reply “volume ok”
The volume can be set between 0 to 99 to make the volume louder or lower
10.3 Dial authorized numbers automatically
TALK button can be pressed for 3 seconds until it stops flashing quickly to get help from the authorized
numbers in emgency. The tracker can call to the authorized numberes one by one and you can hear
the calling. The tracker will stop calling if any authorized number picks up the calling.
10.4 Press TALK button for 3 seconds to cancel the double-communication or authorized
number-calling
16
11 GPRS setting
APN(access point name), IP, PORT have to be set up for gprs function. Apn user, apn password have
to be set up also if there are. So please contact with the gsm operator for them.
11.1
Set GPRS protocols
11.1.1
Set TCP protocols:
Gprsmode+password+space+0 to set up TCP protocol, tracker will reply GPRSMODE ok.
(note: TCP is the default mode in the firmware)
11.1.2 Set UDP protocols:
Gprsmode+password+space+1 to set up UDP protocol, tracker will reply GPRSMODE ok.
11.2 Set IP address and port:
Setup: adminip+password+space+IP address+space+port.
If setup successfully, the tracker will reply SMS “adminip ok”
Cancel: Send SMS noadminip+password
Adminip+password is the command from SMS to GPRS mode when IP, PORT are set up in the
first gprs setting.
11.3 Set APN
Setup: apn+password+space+specify apn content.
If setup successfully, the tracker will reply SMS “APN ok”.
Cancel: The old APN will be invalid automatically when a new APN is set.
11.4 Set APN’s User Name
Setup: apnuser+password+space+the sim card’s user name.
If setup successfully, the tracker will reply SMS “apnuser ok”.
Cancel: The old APN user name will be invalid automatically when a new APN uer name is set.
11.5 Set APN’s Password
Setup: apnpasswd+password+space+the sim card’s password.
If setup successful, the tracker will reply SMS “apnpasswd ok”.
Cancel: The old APN password will be invalid automatically when a new APN password is set.
11.6 GPRS setting
The tracker will hang off the calling in gprs mode when authorized number calls to the tracker, then
send gprs data to the server.
17
GPRS Format explain: serial number, the authorized number, GPRMC data, GPS signal( F is
strong L is weak), alarm information, imei , satellite numbers ,altitude,
battery power (F is full,L is weak) ,charging state( 1 charging ,0
checksum, MCC, MNC,LAC, CELL ID
no charging) ,byte numbers,
GPRS format:
100312033421,13145826175,GPRMC,033421.851,A,2234.0209,N,11403.0733,E,1.87,347.73,12031
0,,,A*62,F,help me, imei:354776036842240,03,73.5,F:4.14V,0,138,46772,460,01,2533,720B
12 Cautions
Please comply with the instructions to extend the unit life:
1. Keep the unit dry. Any liquid, i.e. rain, moisture, may destroy or damage the inside circuitry.
2. Don’t use & store the unit in dusty places.
3. Don’t put the unit in overheated or overcooled places.
4. Handle carefully. Don’t vibrate or shake it violently.
5. Clear the unit with a piece of dry cloth. Don’t clean in chemicals, detergent.
6. Don’t paint the unit, this may cause some foreign materials left in between the parts.
7. Don’t disassemble or refit the unit.
8. Please use the battery and charger provided by manufacturer. Using other batteries and chargers
will cause unwanted situation.
9. Don’t dismount the antenna randomly, or use other antennas. This may interfere the transmission,
and increase the radiation as well.
13 Faults & The solutions
Faults
Startup Fail
Hangup Fail
Monitor Fail
Location report in
digits of zeros.
Solution
Check the battery and see if it is fully charged or
correctly installed.
Check if the unit received GPS signal or not,or if the SIM card there is
calling display or not.
Check if the authorized number is setup or in the coverage
of signals.
Don’t use it in the place beyond reach of signals. Place the
unit outdoors, especially when starting it up.
(Remark: One-time alert only for normal firmware.Please contact with salesman
for the firmware with unlimited times alerts. Please contact them also for the
software to set up commands)
18
Download PDF