DIGIPASS CertiID
Installation Guide
3.1.0
DIGIPASS CertiID Installation Guide
Disclaimer
Disclaimer of Warranties and Limitations of Liabilities
The Product is provided on an 'as is' basis, without any other warranties, or conditions, express or implied,
including but not limited to warranties of merchantable quality, merchantability of fitness for a particular
purpose, or those arising by law, statute, usage of trade or course of dealing. The entire risk as to the results
and performance of the product is assumed by you. Neither we nor our dealers or suppliers shall have any
liability to you or any other person or entity for any indirect, incidental, special or consequential damages
whatsoever, including but not limited to loss of revenue or profit, lost or damaged data of other commercial or
economic loss, even if we have been advised of the possibility of such damages or they are foreseeable; or for
claims by a third party. Our maximum aggregate liability to you and that of our dealers and suppliers shall not
exceed the amount paid by you for the Product. The limitations in this section shall apply whether or not the
alleged breach or default is a breach of a fundamental condition or term, or a fundamental breach. Some
states/countries do not allow the exclusion or limitation or liability for consequential or incidental damages so
the above limitation may not apply to you.
Copyright
© 2008, 2009 VASCO Data Security. All rights reserved.
No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by
any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission
of VASCO Data Security Inc.
Trademarks
VASCO, VACMAN, IDENTIKEY, aXsGUARD, DIGIPASS and the Vasco ‘V’ logo are either registered or
unregistered trademarks of VASCO Data Security, Inc. and/or VASCO Data Security International GmbH in the
U.S. and other countries.
Version: 2009-06-16
© 2008, 2009 VASCO Data Security. All rights reserved. Unauthorized duplication or distribution is prohibited.
2
DIGIPASS CertiID Installation Guide
Table of Contents
Table of Contents
1
Introduction ................................................................................................................................. 5
2
Requirements ............................................................................................................................... 6
2.1
2.2
2.3
Operating System Requirements ............................................................................................................. 7
General Requirements ........................................................................................................................... 8
Software Requirements ......................................................................................................................... 9
Installing DIGIPASS CertiID ................................................................................................................... 10
2.4
Pre-Installation Settings and Tasks ....................................................................................................... 11
2.4.1
Administrator privileges ............................................................................................................................... 11
2.4.2
Smart card reader drivers ............................................................................................................................ 11
2.4.3
DIGIPASS Secure Authentication Suite (SAS)................................................................................................. 11
2.4.4
URL for update client................................................................................................................................... 11
2.5 Installation Overview ........................................................................................................................... 12
2.6 Installing DIGIPASS CertiID Software ..................................................................................................... 13
2.7 Installing DIGIPASS CertiID Software (Silently) ........................................................................................ 20
2.7.1
Supported properties................................................................................................................................... 20
2.7.2
Examples ................................................................................................................................................... 21
2.8 Post-Installation Settings and Tasks ...................................................................................................... 22
2.8.1
Installing Group Policy Administrative Templates on Domain Controller ........................................................... 22
2.8.2
Registering the DP CertiID PKCS#11 Library in Mozilla Firefox and Mozilla Thunderbird ................................... 22
3
Removing/Repairing/Modifying DIGIPASS CertiID ............................................................................ 23
3.1
Removing/Repairing/Modifying DIGIPASS CertiID..................................................................................... 24
© 2008, 2009 VASCO Data Security. All rights reserved. Unauthorized duplication or distribution is prohibited.
3
DIGIPASS CertiID Installation Guide
Introduction
Illustration Index
Figure 1: Installing DIGIPASS CertiID (1) ........................................................................................................................... 13
Figure 2: Installing DIGIPASS CertiID (2) – Accepting License Agreement ........................................................................... 14
Figure 3: Installing DIGIPASS CertiID (3) – Specifying User Information ............................................................................... 14
Figure 5: Installing DIGIPASS CertiID (4) – Selecting Installation Type ................................................................................. 15
Figure 4: Installing DIGIPASS CertiID (5) – Selecting Destination Folder .............................................................................. 16
Figure 6: Installing DIGIPASS CertiID (6) – Selecting Features ............................................................................................ 16
Figure 7: Installing DIGIPASS CertiID (7) – Selecting Default Cryptographic Provider ............................................................ 18
Figure 8: Installing DIGIPASS CertiID (8) – Ready To Install ................................................................................................ 19
Figure 9: Selecting Maintenance Operation ...................................................................................................................... 24
Index of Tables
Table 1: DIGIPASS CertiID Program Features .................................................................................................................... 18
Table 2: Installation Properties......................................................................................................................................... 21
© 2008, 2009 VASCO Data Security. All rights reserved. Unauthorized duplication or distribution is prohibited.
4
DIGIPASS CertiID Installation Guide
1
Introduction
Introduction
This document provides you the information you will need to install DIGIPASS CertiID. It will guide you through
preparation, installation, and post-installation tasks, which may be required for your system.
For detailed instructions and background information refer to other user documentation available on the
product CD.
This manual provides information about how to:
•
Verify system requirements and prepare a typical installation of DIGIPASS CertiID
•
Perform a typical installation of DIGIPASS CertiID
•
Remove, repair, or modify a typical DIGIPASS CertiID installation
This manual does not provide:
•
a detailed introduction to DIGIPASS CertiID, its features, and components (refer to DIGIPASS CertiID User
Manual)
•
detailed instructions about using and configuring DIGIPASS CertiID applications (refer to DIGIPASS CertiID
User Manual)
•
detailed instructions about using DIGIPASS CertiID with common third-party applications (refer to
DIGIPASS CertiID Getting Started Manual)
© 2008, 2009 VASCO Data Security. All rights reserved. Unauthorized duplication or distribution is prohibited.
5
DIGIPASS CertiID Installation Guide
2
Requirements
Requirements
This chapter gives an overview of the DIGIPASS CertiID system requirements.
It covers the following topics:
•
Operating System Requirements
•
General Requirements
•
Software Requirements
© 2008, 2009 VASCO Data Security. All rights reserved. Unauthorized duplication or distribution is prohibited.
6
DIGIPASS CertiID Installation Guide
2.1
Requirements
Operating System Requirements
To install DIGIPASS CertiID software you need:
•
Microsoft Windows Vista with SP1, 32-bit / 64-bit
•
Microsoft Windows XP with SP2 (or higher), 32-bit
•
Microsoft Windows 2000 with SP4 (or higher)
•
Microsoft Windows Server 2008 with SP1 (or higher), 32-bit / 64-bit
•
Microsoft Windows Server 2003 with SP1 (or higher), 32-bit / 64-bit
© 2008, 2009 VASCO Data Security. All rights reserved. Unauthorized duplication or distribution is prohibited.
7
DIGIPASS CertiID Installation Guide
2.2
Requirements
General Requirements
To use DIGIPASS CertiID software you need:
•
a supported smart card reader with PC/SC compatible driver, e.g. DP905
the smart card reader needs to support extended APDUs (to generate 2048 bit keys and other operations)
•
a supported smart card or token, e.g. DP860
•
a PC with 400 MHz processor clock speed
•
256 MB RAM or higher recommended
•
150 MB of free disk space
DIGIPASS CertiID software supports smart cards and tokens based on:
•
Siemens CardOS 4.01A
•
Siemens CardOS 4.3B
•
Giesecke & Devrient STARCOS 3.1
•
Oberthur ID One Cosmo
Supported tokens include:
•
VASCO DP860
•
VASCO DP KEY 1
© 2008, 2009 VASCO Data Security. All rights reserved. Unauthorized duplication or distribution is prohibited.
8
DIGIPASS CertiID Installation Guide
2.3
Requirements
Software Requirements
DIGIPASS CertiID software supports the following certification authorities (CA):
•
Windows Certification Authority
•
Entrust Certification Authority
•
any certification authority based on X.509 v3 certificates
DIGIPASS CertiID software supports all third-party applications based on PKCS#11 Version 2.2 and Microsoft
Cryptography API, including Cryptography API: Next Generation (CNG) for Microsoft Windows Vista.
© 2008, 2009 VASCO Data Security. All rights reserved. Unauthorized duplication or distribution is prohibited.
9
DIGIPASS CertiID Installation Guide
Installing DIGIPASS CertiID
Installing DIGIPASS CertiID
This chapter outlines the preparation that you need to do before installing DIGIPASS CertiID and describes how
to perform a typical DIGIPASS CertiID software installation.
It covers the following topics:
•
Pre-Installation Settings and Tasks
•
Installation Overview
•
Installing DIGIPASS CertiID Software
•
Installing DIGIPASS CertiID Software (Silently)
© 2008, 2009 VASCO Data Security. All rights reserved. Unauthorized duplication or distribution is prohibited.
10
DIGIPASS CertiID Installation Guide
2.4
Pre-Installation Settings and Tasks
2.4.1
Administrator privileges
Installing DIGIPASS CertiID
To install DIGIPASS CertiID you need to be logged on with a user that has local administrator privileges.
2.4.2
Smart card reader drivers
Before you install and use DIGIPASS CertiID, your smart card reader or token must be installed and fully
operative.
2.4.3
DIGIPASS Secure Authentication Suite (SAS)
If you have DIGIPASS Secure Authentication Suite (SAS) installed, you need to uninstall it first, before installing
DIGIPASS CertiID.
2.4.4
URL for update client
DIGIPASS CertiID includes an update client application that searches for software updates on the Internet. By
default, it searches on a pre-defined VASCO update server. However, if you need to set the update URL to an
internal Web server, because you don’t want to allow client machines to connect to the Internet, you can
change it directly in the installation package using any MSI editing software, such as Microsoft Orca.
The URL for the update client is stored in the Registry table under the following key:
•
Registry: registry4.58949955_0765_4225_AB94_EA84F43B417A
•
Name: SettingsURL
You can also change the URL, if DIGIPASS CertiID is already installed, via the string value SettingsURL under
the following Windows Registry key:
[HKLM\SOFTWARE\Wise Solutions\WiseUpdate\Apps\VASCO DIGIPASS CertiID]
© 2008, 2009 VASCO Data Security. All rights reserved. Unauthorized duplication or distribution is prohibited.
11
DIGIPASS CertiID Installation Guide
2.5
Installing DIGIPASS CertiID
Installation Overview
1. Verify that you have the necessary system components installed.
2. If required, upgrade your system to the latest service pack version.
3. If required, install desired third-party software products.
4. Install your smart card reader and/or token devices.
5. Install DIGIPASS CertiID software.
© 2008, 2009 VASCO Data Security. All rights reserved. Unauthorized duplication or distribution is prohibited.
12
DIGIPASS CertiID Installation Guide
2.6
Installing DIGIPASS CertiID
Installing DIGIPASS CertiID Software

To install DIGIPASS CertiID software
1. Insert the DIGIPASS CertiID product CD and select Setup and Installation > Install DIGIPASS
CertiID from the CD start menu to launch the setup program.
TIP
If the CD start menu does not appear automatically, you might have the AutoPlay feature for your
CD/DVD-ROM deactivated. In this case, you can start the CD start menu manually by launching
autorun.exe in the CD main directory!
NOTE
If you want or need to launch the setup program directly, you can find it in the Install directory of
your DIGIPASS CertiID product CD. The 32-bit version of the setup is setup.msi; the 64-bit version
is setup64.msi.
Figure 1: Installing DIGIPASS CertiID (1)
© 2008, 2009 VASCO Data Security. All rights reserved. Unauthorized duplication or distribution is prohibited.
13
DIGIPASS CertiID Installation Guide
Installing DIGIPASS CertiID
2. Read the license agreement text, select I accept the license agreement and click Next.
Figure 2: Installing DIGIPASS CertiID (2) – Accepting License Agreement
3. Enter your name and the name of your organization to personalize your copy.
Figure 3: Installing DIGIPASS CertiID (3) – Specifying User Information
© 2008, 2009 VASCO Data Security. All rights reserved. Unauthorized duplication or distribution is prohibited.
14
DIGIPASS CertiID Installation Guide
Installing DIGIPASS CertiID
4. Select the desired installation type.
Figure 4: Installing DIGIPASS CertiID (4) – Selecting Installation Type
•
Select Typical, if you want to install the most common applications features automatically. Continue
with Step 8.
A typical installation installs both, VASCO CertiID Smart Card Crypto Provider and VASCO Card
Module on a machine. If you install on Windows XP or Windows 2000 the former is registered as
default cryptographic provider, if you install on Windows Vista the latter is registered.
•
Select Custom, if you want to choose and configure the application features to be installed yourself.
Continue with the next step.
5. Select the destination folder for the installation.
The default destination folder is C:\Program Files\VASCO\DIGIPASS CertiID\.
© 2008, 2009 VASCO Data Security. All rights reserved. Unauthorized duplication or distribution is prohibited.
15
DIGIPASS CertiID Installation Guide
Installing DIGIPASS CertiID
Figure 5: Installing DIGIPASS CertiID (5) – Selecting Destination Folder
NOTE
The 64-bit version of DIGIPASS CertiID installs 64-bit and some 32-bit components. If you install it,
you can only select the destination folder for the 64-bit components; 32-bit components are
always installed to the default destination folder.
6. Select the software modules you want to install on your machine.
Figure 6: Installing DIGIPASS CertiID (6) – Selecting Features
© 2008, 2009 VASCO Data Security. All rights reserved. Unauthorized duplication or distribution is prohibited.
16
Installing DIGIPASS CertiID
DIGIPASS CertiID Installation Guide
Feature
Purpose
Core Components
Contains all core components needed to run DIGIPASS CertiID,
including token drivers.
Token Drivers
Token Templates
PKI Middleware Components
Cryptographic Service Provider (CSP)
PKCS#11 Module
Entrust Configuration
Firefox/Thunderbird
Configuration
Card Module
IdenTrust
ISPI (for Mozilla Firefox)
ISPI (for Microsoft Internet
Explorer)
ISIL (for Java-capable browsers)
Configuration
Configuration Center
Group Policy Administrative Templates
Management Application
Tray Agent
Certificate Registration Plug-in
NOTE: This feature is required to be installed!
Installs token drivers for supported tokens.
NOTE: This feature does not install hardware drivers!
Installs token templates required to initialize empty tokens.
This includes all cryptographic middleware modules.
Installs VASCO CertiID Smart Card Crypto Provider for
cryptographic support for Microsoft and other CryptoAPI aware
products.
Installs cryptographic support for Mozilla and other PKCS#11
aware products.
Registers the DP CertiID PKCS#11 Library with Entrust clients.
NOTE: If you select this feature, but no entrust configuration file
(i.e. entrust.ini) is found, it is automatically deselected and not
installed!
Installs a Mozilla extension that automatically registers the DP
CertiID PKCS#11 Library with Mozilla Firefox and Mozilla
Thunderbird for each user when the applications are started the
first time.
Installs VASCO Card Module.
NOTE: Requires Microsoft Base Smart Card Crypto Provider to
work (not available for Microsoft Windows 2000)!
Installs support libraries for IdenTrust.
Installs Mozilla Firefox plug-in to support IdenTrust Signing PlugIn (ISPI) specification.
Installs an ActiveX control for Microsoft Internet Explorer to
support IdenTrust Signing Plug-In (ISPI) specification.
Installs a Java executable to support IdenTrust Signing Interface
Library (ISIL) specification within Java-capable Web browsers.
NOTE: Requires an installed Java Runtime Environment (JRE) to
work! Currently, only 32-bit is supported!
Installs tools to configure DIGIPASS CertiID.
Installs the basic configuration center.
Installs Administrative Templates to configure DIGIPASS CertiID
via Group Policy.
Installs the DP CertiID Management Application, used to manage
tokens and digital certificates.
Installs the DP CertiID Tray Agent, used for automatic registration
of certificates.
Installs plug-in for DP CertiID Tray Agent to register and
unregister digital certificates automatically.
© 2008, 2009 VASCO Data Security. All rights reserved. Unauthorized duplication or distribution is prohibited.
17
Installing DIGIPASS CertiID
DIGIPASS CertiID Installation Guide
Feature
Slot and Token Plug-in
Troubleshooting and Diagnostics Plug-in
Troubleshooting and Diagnostics
User Documentation
Update Client
Purpose
Installs plug-in for DP CertiID Tray Agent to monitor and indicate
the state of your slots and tokens.
Installs plug-in for DP CertiID Tray Agent to monitor the state of
system and user diagnostics.
Installs programs used to diagnose and troubleshoot issues with
the middleware.
Installs end user documentation and online help files in different
languages. By default, only English documentation is installed.
Installs an update application to search for software updates on
the Internet.
Table 1: DIGIPASS CertiID Program Features
NOTE
The Entrust Client reads its configuration file only once, i.e. when it starts. If you select the Entrust
Configuration feature, the new configuration settings do not become effective, until you reboot the
machine after installing DIGIPASS CertiID.
NOTE
The ISIL support library is installed to the lib/ext directory of all installed Java Runtime
Environments (JRE) found. If you install a new version of JRE, you can renew the ISIL library
installation by executing VdsISILReg32.exe in the DIGIPASS CertiID program directory.
7. If required, select which module to register as default cryptographic provider.
This step is only required, if you install both, VASCO CertiID Smart Card Crypto Provider and VASCO
Card Module on a machine, where the Microsoft Base Smart Card Crypto Provider is available.
Microsoft Base Smart Card Crypto Provider is not available for Microsoft Windows 2000!
Figure 7: Installing DIGIPASS CertiID (7) – Selecting Default Cryptographic Provider
© 2008, 2009 VASCO Data Security. All rights reserved. Unauthorized duplication or distribution is prohibited.
18
DIGIPASS CertiID Installation Guide
Installing DIGIPASS CertiID
•
Select Cryptographic Service Provider (CSP), if you want to register VASCO CertiID Smart Card
Crypto Provider as default cryptographic provider.
•
Select Card Module, if you want to register VASCO Card Module as default cryptographic provider.
NOTE
Microsoft Windows allows only one module being registered as default cryptographic provider
module. The default cryptographic provider is linked with the supported smart card and token
types and is automatically used by all applications using CAPI for cryptographic operations.
This setting does not affect applications supporting PKCS#11.
8. Click Next to start installation.
Figure 8: Installing DIGIPASS CertiID (8) – Ready To Install
9. After successful installation, click Finish to exit the setup program.
© 2008, 2009 VASCO Data Security. All rights reserved. Unauthorized duplication or distribution is prohibited.
19
Installing DIGIPASS CertiID
DIGIPASS CertiID Installation Guide
2.7
Installing DIGIPASS CertiID Software (Silently)
You can install the DIGIPASS CertiID software silently (without setup GUI) using the following command line:
msiexec /i setup.msi /qn [PROPERTY=VALUE]
where PROPERTY can be the name of a property to be set to VALUE.
2.7.1
Supported properties
Property
Description
Specifies which program features should be installed. The features are specified in a comma
separated list. If you use this property, you need to specify all program features you want to
install.
NOTE: If you mistype a feature value, you will receive an error message!
Possible values:
VdsCore
VdsCardModule
VdsConfig
VdsCPCertReg
ADDLOCAL
…install DP CertiID Core Components (required!)
…install VASCO Card Module
…install DP CertiID Configuration Center
…install “Certificate Registration” plug-in for DP CertiID Tray
Agent
VdsCPDiag
…install “Troubleshooting and Diagnostics” plug-in for DP
CertiID Tray Agent
VdsCPSlotToken
…install “Slot and token” plug-in for DP CertiID Tray Agent
VdsCSP
…install VASCO CertiID Smart Card Crypto Provider
VdsDiag
…install DP CertiID Troubleshooting and Diagnostics
VdsDocumentationEnglish …install English documentation
VdsGroupPolicy
…install Group Policy Administrative Templates
VdsIdentrustISIL
…install IdenTrust support for Java-capable browsers (ISIL)
VdsIdentrustISPIIE
…install IdenTrust support for Microsoft Internet Explorer
(ISPI)
VdsIdentrustISPIMoz
…install IdenTrust support for Mozilla Firefox (ISPI)
VdsPKCS11
…install the DP CertiID PKCS#11 Library
VdsPKCS11ConfigEntrust …register DP CertiID PKCS#11 Library with Entrust clients
VdsPKCS11ConfigFirefox …register DP CertiID PKCS#11 Library with Mozilla Firefox
and Mozilla Thunderbird
VdsPKIMan
…install DP CertiID Management Application
VdsTokDriversCardos4 …install token drivers for CardOS 4.01A and 4.3B tokens
VdsTokDriversIdOne
…install token drivers for CertiID ID-One tokens
VdsTokDriversStarcos3 …install token drivers for STARCOS 3.x tokens
VdsTokTemplates
…install token templates required to initialize empty tokens
VdsTray
…install DP CertiID Tray Agent
VdsUpdateClient
…install update application
VdsUpdateClientAuto
…automatically start update application on system start
© 2008, 2009 VASCO Data Security. All rights reserved. Unauthorized duplication or distribution is prohibited.
20
Installing DIGIPASS CertiID
DIGIPASS CertiID Installation Guide
Property
Description
Specifies which module to register as default cryptographic provider.
Possible values:
DEFAULTPROVIDER
Auto
CSP
CM
…automatically determine module to register (default)
…registers VASCO CertiID Smart Card Crypto Provider
…registers VASCO Card Module
Table 2: Installation Properties
NOTE
Property names and values are case sensitive.
2.7.2
Examples
This example performs a typical installation with the default program features and automatically registers the
correct default cryptographic provider:
msiexec /i setup.msi /qn
This example installs a minimum set required to run DIGIPASS CertiID with third-party applications:
msiexec /i setup.msi /qn
ADDLOCAL=VdsCore,VdsCSP,VdsCardModule,VdsPKCS11,VdsTokDriversCardos4,
VdsTokDriversIdOne,VdsTokDriversStarcos3
This example installs all features and registers VASCO Card Module as default cryptographic provider:
msiexec /i setup.msi /qn DEFAULTPROVIDER=CM ADDLOCAL=ALL
© 2008, 2009 VASCO Data Security. All rights reserved. Unauthorized duplication or distribution is prohibited.
21
DIGIPASS CertiID Installation Guide
2.8
Post-Installation Settings and Tasks
2.8.1
Installing Group Policy Administrative Templates on Domain Controller
Installing DIGIPASS CertiID
If you want to use domain Group Policy, but don’t want to install DIGIPASS CertiID on the domain controller,
you need to copy the Administrative Templates to the respective directories.
The plain Administrative Templates are on the DIGIPASS CertiID product CD in the Install\Group Policy folder.
2.8.2
•
For Windows Server 2008 copy VascoDPCertiID.admx and en-US\VascoDPCertiID.adml to
<WindowsFolder>\PolicyDefinitions, respectively, where <WindowsFolder> is the full path to your
Windows folder, e.g. C:\Windows\.
•
For Windows Server 2003 copy VascoDPCertiID.adm to <SystemFolder>\GroupPolicy\Adm, where
<SystemFolder> is the full path to your system folder, e.g. C:\Windows\System32\.
Registering the DP CertiID PKCS#11 Library in Mozilla Firefox and Mozilla Thunderbird
If you want to use the DP CertiID PKCS#11 Library in Mozilla Firefox or Mozilla Thunderbird,
respectively, you need to register it in that applications.
If you select the Firefox/Thunderbird Configuration feature when installing DIGIPASS CertiID, a Mozilla
extension is installed and registered. This extension is launched for each user once, when the Mozilla
application is started asking wheter to register the DP CertiID PKCS#11 Library automatically.
The extension also adds two commands to the Tools menu of the Mozilla applications, i.e. Register VASCO
DP CertiID PKCS#11 and Unregister VASCO DP CertiID PKCS#11, allowing to conveniently register
and unregister the DP CertiID PKCS#11 Library, respectively.
For information about how to manually register/unregister the DP CertiID PKCS#11 Library in Mozilla
applications, refer to the DIGIPASS CertiID Getting Started Manual.
© 2008, 2009 VASCO Data Security. All rights reserved. Unauthorized duplication or distribution is prohibited.
22
DIGIPASS CertiID Installation Guide
3
Removing/Repairing/Modifying DIGIPASS CertiID
Removing/Repairing/Modifying DIGIPASS CertiID
This chapter describes how to remove an existing DIGIPASS CertiID installation, add or remove single
components, or to repair an installation, if files have been corrupted, deleted, or lost.
It covers the following topics:
•
Removing/Repairing/Modifying DIGIPASS CertiID
© 2008, 2009 VASCO Data Security. All rights reserved. Unauthorized duplication or distribution is prohibited.
23
DIGIPASS CertiID Installation Guide
3.1
Removing/Repairing/Modifying DIGIPASS CertiID
Removing/Repairing/Modifying DIGIPASS CertiID

To remove/repair/modify an existing DIGIPASS CertiID installation
1. Open the control panel via Start > Settings > Control Panel.
2. Double-click Add and Remove Programs.
3. Select VASCO DIGIPASS CertiID and click Change.
The Application Maintenance Windows appears.
Figure 9: Selecting Maintenance Operation
4. Do one of the following:
(a) If you want to remove the software from you system, select Remove and click Next.
(b) If you want to repair a corrupted or damaged installation, select Repair and click Next.
(c) If you want to remove or install additional components select Modify and click Next.
NOTE
If you want to perform certificate-based authentication to the operating system, you need to restart
the machine first, after changing the registered default cryptographic provider via Modify!
© 2008, 2009 VASCO Data Security. All rights reserved. Unauthorized duplication or distribution is prohibited.
24
Download PDF