Semiconductors – Starter Kits

Semiconductors – Starter Kits

Contents

B8-Bit Microprocessor Tools

8051

78KO

ACE

COP8

H8

HT

PIC

ST6/7

SX

Z8

16-Bit Microprocessor Units

ADC/LDO Evaluation

CAN Protocol

Digital Signal Processing

Digital Thermometer

ID/Touch Memory

Memory Kits

Miscellaneous Tools

Programmable Logic Device

Remote Control

Siren Board

Speech Synthesis

Variable Filter Board

732

738

737

732

716

728

727

730

737

736

710

710

711

727

724

726

725

725

735

708

734

738

737

738

Semiconductors – Starter Kits

10

PLD Starter Kit

Semiconductors – Starter Kits

Programmable Logic Device Development Tools

KANDA SYSTEMS

This starter kit is an easy to use starting kit for any electronics engineer/student who wishes to learn how to use

Programmable Logic Devices (PLD’s) in their designs. Familiarity can be gained on using 16V8, 20V8 and 20V10 devices typically.

Features:

Ì Programmer unit which connects to a PC Parallel port (Parallel lead inc.)

Ì The programmer has on-board status LEDs indicating power, low supply & programming activity. A 24 pin ZIF socket allows easy loading of devices to be programmed

Ì PLD Trainer Unit, this is a demonstration board on to which a programmed PLD can be tried out. The unit has 10 input switches for simulating input signals to the PLD and a switchable output which can be routed either to a seven segment display, or 8 individual LEDs.

Both units have an on-board regulator and DC input socket.

Power requirements are 9v DC 300mA.

Ì A sample ATF16V8B device is included

All software is supplied on 3.5” disks and an Atmel CD-ROM is included as a reference for all the datasheets required for the kit.

SEM850

PLD Starter Kit .......................................

Order Code 318-7718 each

MACH

ISP Starter Kit LATTICE-VANTIS

The MACH Starter Kit by Vantis allows for evaluation of In-System-Programming (ISP) with MACH devices and benefits of

‘Design Direct’ programmable logic software in designing with complex PLDs. The software enables design, simulation and programming of Vantis CPLD and PAL devices. It supports JEDEC file generation and includes MACHPRO software for ISP from PC parallel port.

The kit provides IEEE JTAG testability eliminating separate programming/testing stations, thereby avoiding multiple handling steps, facilitating quick time designs.

System requirements: Wins 95, 98 or NT, AMD K6 or Pentium CPU.

Kit includes: Ì CD-ROM with ‘Design Direct’ CPLD software, MACHPRO software, Databook, Applications notes

Ì 44-pin ISP board Ì Buffered programming cable

Ì MACH ISP manual hardcopy Ì M4-32/32 and 64/32 samples

Ì Readme installation procedure

SEM751

MACH4-SK44 Starter Kit .....................

Order Code 301-0120 each

10

MAX7000s

These devices are ideal for system-level integration, featuring ISP, six output enable signals, two global clocks, fast input registers and programmable slew-rate control. ISP uses

JTAG, allowing for devices to be programmed and the design board functionally tested, saving on manufacturing steps and on testing times.

The PL Byteblaster programming cable and the PLS-WEB CD-ROM is all that is required for prototyping.

SEM731

1+

Price Each

10+ 100+ Mftrs. List No.

EPM7032SLC44-6

EPM7032SLC44-10

EPM7032STC44-6

EPM7032STC44-10

EPM7064SLC44-6

EPM7064SLC44-10

EPM7064STC44-6

EPM7064STC44-10

EPM7128SLC84-10

EPM7128SLC84-15

EPM7128STC100-10

EPM7128STC100-15

Macrocells

32

32

32

32

64

64

64

64

128

128

128

128

I/O pins

36

36

36

36

36

36

36

36

36

36

36

36

Speed (ns)

6

10

6

10

6

10

6

10

10

15

10

15

Pins/Package

44 PLCC

44 PLCC

44 TQFP

44 TQFP

44 PLCC

44 PLCC

44 TQFP

44 TQFP

84 PLCC

84 PLCC

100 TQFP

100 TQFP

Order Code

300-5811

300-5800

300-5847

300-5823

300-5872

300-5860

300-5951

300-5914

300-5975

300-5963

300-5999

300-5987

PL-Byteblaster programming cable........................................................

Order Code 302-6530

PLS-WEB CD-ROM development software, includes data and application notes ..

Order Code 301-0193 each each

CPLD Design System XILINX

The XPLA Designer, provides software and application solutions to a range of fast zero power eXtended Programmable Logic Array (XPLA ™ ) CPLDs. The design tool supports both 3V and 5V devices and is PC Windows (3.1X and Windows 95) based, offering design entry, editing, synthesis, device fitting, function simulation, and full timing simulations. The design entry could be via high-level constructs and low-level directives. Popular state machine constructs, truth tables and Boolean equations are supported. The user is able to rapidly simulate designs via interactive waveform entry and analysis by developing simulation scripts for complex vector patterns. 32 macrocell devices are supported.

SEM393

Device

3032

3064

5032

5064

Macrocells

32

64

32

64

Gate

Equivalents

1000

2000

1000

2000

Inputs, I/O

36/32

36/32

36/32

36/32

Operating

Voltage

3V

3V

5V

5V

Speed (ns)

8

10

6

7.5

Pins/Package

44 PLCC

84 PLCC

44 PLCC

84 PLCC

Mftrs. List No.

PZ3032-12A44

PZ3064-12A84

PZ5032-10A44

PZ5064-10A84

Order Code

790-382

283-551

790-394

283-563

† Available until stocks are exhausted

1+

Price each

10+ 100+

PZXPLAMSM XPLA Designer .....................

Order Code 790-400 each

708

Semiconductors and Passives

Prices are in Singapore Dollars and exclusive of GST

Semiconductors – Starter Kits

VHDL Easy Design Software XILINX

The VHDL Easy Design Software is produced by MINC. The software allows design entry using VHDL and will output an EDIF file or equivalent, which can be ported to a design compiler e.g. XPLA Designer or XPLA Professional. Pack contains CDROM (with VHDL Easy and XPLA Designer software), compact wallet and step-by-step tutorial booklet for Philips

Coolrunner designs).

SEM687

PZVHDLEZ MSC ...................................

Order Code 120-492

† Available until stocks are exhausted

each

Warp2+

VHDL Compiler

Ì Supports Cypress PLDs, CPLDs and FPGAs.

Ì VHDL (IEEE 1076 and 1164) high level language compiler.

Ì State of the art optimisations and reduction algorithms.

Ì Supports Boolean, state table, gate level, Register Transfer Language (RTL), Aldec editor

The Cypress CY3120 (Warp2+) VHDL compiler facilitates device independent design over the Cypress PLD and CPLD range and offers portable design solutions across multiple devices. Warp2+ will be hosted by IBM PC-AT and Windows. It utilises a fully compliant subset of IEEE 1076 VHDL including Enumerated Types, Operator Overload, For ...... Generate and support for integer arithmetic. Also included with the CY3120 is a timing simulation from Aldec, a functional graphical waveform simulator enabling on screen entry and modification of stimulus waveforms.

SEM263

CY3120 (Warp2+) VHDL Compiler ..........

Order Code 301-1203 each

FPGA Starter Kit

System requirements:

Ì PC, minimum Pentium

Ì WIN 95 or NT4

Ì At least 32MB RAM (64MB recommended)

KANDA SYSTEMS

This kit is a complete development environment as an introduction into the use of Field Programmable Gate Arrays (FPGAs).

The kit provides a wealth of VHDL examples and gives a wide range of projects all of which are based around the 40K

ATMEL family. The kit specifically programs the ATMEL AT40K20 device.

The starter kit comprises of:

Ì Comprehensive FPGA book

Ì Main PCB

Ì Adapter board

Ì Cable

Ì Dongle

Ì Atmel IDS CD (Version 6)

Ì Programming Software

Ì Registration card

On-Board Features

Ì AT40K20 device included

Ì Configurator & ISP

Ì Sockets for AVR microcontroller (AT90S8515) and 4 x

512KB EEPROMS

Ì Infra-red Transmitter

Ì Infra-red receiver/decoder

Ì 2 x ADCs (High precision and high speed)

Ì 1 x DAC

Ì 8 x Programmable switches & LEDs

Ì 2 x Serial ports

Ì PWM voltage output (up to 500mA)

Ì Multiple clocks - 40MHz, 10MHz, 4.9512MHz and

32.768KHz

Ì 6 Digit direct drive LCD Display

Ì Interface for 2 line x 16 intelligent LCD

Ì AC or DC power supply input

SEM852

FPGA Starter Kit .....................................

Order Code 318-7690

AT40K20-2DQC ......................................

Order Code 323-5970 each each

10

Get Going With 40K Series FPGAs KANDA SYSTEMS

A comprehensive book which is also supplied with the FPGA Starter kit, Order Code 318-7690, introduces the reader to the Field Programmable Gate

Array (FPGA). It starts with an overview on FPGAs and covers the architecture of one particular family of FPGAs, the ATMEL AT40K series. Using the tools five simple designs are looked at, illustrating several features of the architecture and how they are implemented. Finally, more advanced designs are looked at which directly access the use of the FPGA starter kit and its peripherals.

Get Going With 40K Series FPGAs................

Order Code 318-7706

SEM853

each

The TRAC Development Kit

TRAC is field Programmable Analogue Device which brings the benefits of a structured, top-down approach to analogue signal processing.

The TRAC Development Kit enables instant prototyping of TRAC designs, allowing engineers to prove their ideas and get them speedily to market. This is achieved by the integration of software, hardware and the device which is fully reconfigurable. An analogue application is designed and simulated by the Windows based, drag and drop software and the data is sent to the hardware to programme the device.

The fully functional TRAC development board includes four TRAC020 devices (each with 20 cells per device, digitally programmable to one of eight top-level functions) to permit prototyping of designs up to 80 cells, and boards can be daisy-chained for more ambitious projects.

As well as a parallel interface for programme download, an EEPROM is also included for non-volatile programme storage.

The Development Kit includes:

Ì DC power supply

Ì Applications library

Ì Parallel interface cable

Ì Manual and documentation

Ì Design, simulation and download software

SEM536

TRAC020LHUK Development Kit for UK ..........

Order Code 325-2231

TRAC020LHEURO Development Kit for Europe ..

Order Code 325-2255 each each

1+

Price Each

10+ 100+ Description

20 Cell TRAC, 16/SSOP Package ........................

20 Cell TRAC, 36/SSOP Package ........................

20 Cell TRAC, 40/DIL Package ...........................

Mftrs. List No.

TRACS2Q16

TRAC020LHQ36

TRAC020D40

Order Code

¿

¿

325-2218

325-2220

676-032

† Available until stocks are exhausted continued

Internet www.farnell.com

Sales Tel (65) 788 0200 Sales Fax (65) 788 0300

709

ispPAC

Semiconductors – Starter Kits

Programmable Logic Device Developement Tools —

Continued

The ispPAC system comprises of a development kit and associated devices which bring analogue functions such as sum/difference, gain/attenuation, integration and high order filters under the control of a programmable routing architecture. The individual PACells have programmable gain and frequency response with user definable routing so that separate internal blocks may be either connected together, or connected to external pins on the device, in this way analogue functions may be produced without compromising performance or bandwidth.

The devices are In-System Programmable, and the development kits include the necessary cables and software together with an evaluation board and sample devices.

The PAC-Designer kit includes: Ì PAC-Designer ‘Getting Started Manual’

Ì Software on CD-ROM

Ì isp Interface to connect to PC parallel port

Ì Evaluation board

Applications: Ì Single 5V supply signal conditioning Ì Analogue Front-Ends for Data Acq. systems

Ì Active filters, Gain stages, Summing blocks Ì Sensor signal conditioning

SEM889

1+

Price Each

10+ 100+ Description

Evaluation kit for ispPAC 10 devices...................................

Evaluation kit for ispPAC 20 devices...................................

ispPAC with four Instrument Amplifier stages, 28pin DIP ..

ispPAC with four Instrument Amplifier stages, 28pin SOIC ispPAC with two Instrument Amplifier stages, 8-bit DAC and Fast dual comparator, 44 pin PLCC ..........................

Mftrs. List No.

ISPPAC-Designer system 10

ISPPAC-Designer system 20

ISPPAC10-01PI

ISPPAC10-01SI

ISPPAC20-01JI

Order Code

333-1568

333-1570

332-7784

332-7796

332-7802

Memory Kits

PCMCIA Card Driver

Card Wizard

Card Wizard is a Reader/Writer for all 2.01 compatible type 1, 2 or 3 cards.

Connecting to a standard 16 bit ISA slot, Card Wizard transforms your desktop PC. It presents one type 3 slot on the back ideal for Ethernet or Modem cards, and 13.5mm high slot in a 3.5" or 5.25" bay on the front for type 1, 2 or 3 cards. All the necessary driver software is provided in addition to a comprehensive manual. Card Wizard will support all

Memory, ATA cards and I/O devices meeting PCMCIA 2.01 specification.

10

Card Wizard .........................................

Order Code 640-955

SEM332

each

Serial EEPROM Designer's Kit

Supports 24C/24LC/24XX/59C/85C/93C/93LCXX Families

Supplied with a universal power supply. UK or International power supply optional. UK and European mains plug lead available separately.

05BTutor Kit

Microchip's Serial EEPROM Designer's Kit includes everything necessary to quickly develop a robust and reliable Serial EEPROM based design and greatly reduce the time required for system integration and hardware/software debug.

The Total Endurance software model enables designers to quickly choose the best Serial EEPROM for the specific application and perform trade-off analysis with voltage, temperature, write cycle and other system parameters in order to achieve the desired erase/write endurance or product lifetime.

Microchip's SEEVAL (Serial EEPROM Evaluation and Programmng System) will accept any

Microchip Serial EEPROM in DIP package and enable the designer or system integrator to read, or erase any byte or the entire array.

Contents include :

Ì Microchip Total Endurance

™ software model

Ì Microchip Serial EEPROM sample pack

Ì Microchip SEEVAL ™ evaluation and programming board

Ì RS232 serial cable

Ì Microchip SEEVAL ™ software

SEM424

Serial EEPROM Designer's Kit ..................

Order Code .790-965

Power Supply 9V, 500mA (UK 240Vac) ........

Order Code 110-899

Power Supply 9V, 900mA (IEC 110- 240Vac) .

Order Code 110-711

UK mains plug lead ...............................

Order Code 439-319

European mains plug lead .......................

Order Code 210-699 each each each each each

8 Bit Microprocessor Kits & Development Tools

The Ultimate Tutor is an easy-to-learn, easy-to-install teaching tool for introduction to the

M68HC05 range. It allows for learning at own pace from basics to understanding the M68HC05 architecture. On-disk demonstration programs are given which introduce new aspects of assembly language programming and highlight features of the 68HC05, allowing the programming concepts gained to be applied to trainees/designers applications. The

3.5in disk contains emulation and downloading software. External peripheral components may be used with the training board to extend understanding.

Kit includes:

Ì Demo board assembly

Ì Tutorial book

Ì Software disk

Ì Schematic diagrams

Ì 9V PP3 battery

Minimum requirements:

Ì IBM compatible PC

(DOS/Wins) or a Power

Mac 7.5 or later

Ì 1+ serial port

Ì 3.5in floppy disk drive

Ì 9 to 9 pin serial cable

SEM607

05BTutor, M68HC05 Tutorial System

Order Code

111-510

Price Each

710

Semiconductors and Passives

Prices are in Singapore Dollars and exclusive of GST

M68HC05 In-Circuit Simulator Kits

Semiconductors – Starter Kits

Motorola’s Programmer/In-Circuit Simulator (ICS) kits help develop and debug target systems incorporating members of the 68HC05 microcontroller family. The kits provide an interface to users target system for Windows based editing, assembly, software simulation, programming and in-circuit simulation. The inputs/outputs of the target can be used during code simulation.

Features:

Ì Windows based Integrated

Development Environment (IDE) with editor, assembly, debugger and simulator – runs under Wins 3x and '95

Ì Programs EPROM, OTP, or EEPROM microcontrollers

Ì MCU samples

Ì Serial cable (PC to ICS)

Ì Power Supply

Ì MCU technical databook

Ì Software/Hardware user’s manual

Ì Applications guide

Ì 68HC05 CD-ROM

SEM608

Price Each

M68ICS05B design-in kit for 68HC705B16 devices

M68ICS05C design-in kit for 68HC705C8A/9A devices

Order Code

111-521

111-533

MC68HC08 In-Circuit Simulator Kits

SK-5xx Starter Kits

These Programmer/In-Circuit Simulator (ICS) kits help develop code and debug target systems incorporating the

MC68H(R)C908 range of FLASH microcontrollers. The Windows based development environment incorporates an assembler, editor, simulator and debugger which provide an ideal platform to write and debug code for this range of devices.

Features:

Ì Windows based IDE interface

Ì Programs, Simulates and Emulates the selected devices

Ì JL/JK Unit can accept DIL and SOIC 20/28 pin devices

Ì Serial cable and all Header cables supplied

Ì Universal power supply included

Ì MCU samples

Ì Technical manuals and software supplied

SEM891

M68ICS08JL-kit ...development kit for MC68H(R)C908JLx/JKx

M68ICS08GP-kit ...development kit for MC68HC908GP32

M68ICS08JB-kit ...development kit for MC68HC908JB8xx ö

Order Code

332-4400

333-3413

348-0197

Price Each

Each starter kit contains an evaluation board which connects to a PC via RS-232 and allows for capabilities of the featured microcontrollers to be assessed and development of applications to be carried out quickly and easily. The board has a wire wrap area and RAM and FLASH memory for program download. Evaluation versions of third party development software are provided, with restricted code size, as well as full data on the microcontroller, the board manual and application notes. The starter kit

CD-ROM also contains code examples, both source and executable.

10

SEM678

each each each

SK-504, Starter Kit for C504 microcontroller...

Order Code 119-880

SK-515, Starter Kit for C515 microcontroller...

Order Code 119-908

SK-167, Starter Kit for C167 microcontroller...

Order Code 119-910

DAvE CD-ROM

DAvE - Digital Application Engineer CD-ROM aids evaluation and comparison of the C500 and C166 families of microcontrollers, allowing selection of correct device for application. It is a source for all standard information on Siemens embedded technology with access to user's manual, data, application notes etc. It helps with programming of the selected device via intelligent wizards, configure the device and auto-generate C-level templates with driver functions for on chip peripherals and interrupt controls.

Dallas 87C520 Starter System

Internet www.farnell.com

DAvE, Digital Application Engineer CD-ROM ..

Order Code 119-738

SEM677

each

8051 Based Microcontrollers

This system is aimed at developers looking to evaluate/program the high speed Dallas 87C520 microcontrollers. The kit is based around a ‘Universal 8051 Monitor Module’ which allows user code to be downloaded into external RAM and then single-stepped under PC control using the Keil ‘dScope’ debugger. The system is supplied with an advanced Windows Integrated Development Environment (IDE), Keil C51 Compiler, Assembler and

Debugger. This makes it ideal for evaluation and small projects.

Features:

Ì Integrated Development Environment (IDE) including an ANSI C Compiler, Macro Assembler, project management utility and software simulator/debugger (limited to 2K total code output)

Ì Universal 8051 Monitor Module including two serial port channels allowing one for debugging information and one for user serial communications hardware and a prototyping area

Ì Includes a UK power supply, serial and parallel cables

Ì Ideal for evaluation purposes and small projects

SEM765

EQ-DS520-ST1 (UK) Dallas 87C520 Starter System ..

Order Code 302-2250

EQ-DS520-ST1 (EU) Dallas 87C520 Starter System ..

Order Code 327-0282 each each

continued

Sales Tel (65) 788 0200 Sales Fax (65) 788 0300

711

51LPC

Semiconductors – Starter Kits

8051 Based Microcontrollers —

Continued

The LINK-51 Evaluation Kit comes with EMIT

3.0 (Embedded Micro Internetworking Technology) Evaluation networking software for the 51LPC family of 80C51-based microcontrollers. EMIT software is a device networking software based on standard Internet technologies that network 8- and 16-bit embedded devices to each other and the Internet.

LINK-51 provides a development environment for embedded network connectivity into electronic devices, including:

Ì 51LPC microcontroller

Ì EMIT 3.0 evaluation software

Ì 51LPC - based evaluation board

Ì Electronic documentation on disk

EMIT software allows access to the on-board 51LPC via web browser, as well as connection of several micro enabled devices via a local RS232/485 network.

Note: The software provided has a 30 day evaluation period from installation. This does not disable the product completely but remote connection to the device through a Gateway from an internet connection will be lost.

10

Features:

Device Application Tools

Ì Device object server

Ì Assembly source code - 8051

User Interface Tools

Ì Web browser graphical user interface

Ì Java Bean compliant interface objects

Electronic Documentation

Ì C source code - 8051

Ì Device debugging tools

Ì Dynamic Services for batch process data gathering

Ì C simulators of EMIT - enabled devices

Ì Complete description of the EMIT architecture

Ì Step by step tutorials on how to use the references board and easily created user interfaces

Ì Start to finish development process guidelines

Hardware Reference Design

Ì LINK-51 evaluation board for the 51LPC family Ì RS232 support

Ì Package data table creation utility

Ì Device network connectivity software

Ì EMIT Access Library client application toolkit

Ì Development procedures for the different user interface options

Ì Programming instructions and examples on integration with a device

Ì Reference details on EMIT components and utilities

Ì Expansion interface bus for other hardware products

LINK-51, the 51LPC Evaluation Kit for the P87LPC764 Order Code 309-5745

The 51LPC microcontroller family features include:

Ì C51 compatible

Ì 2.7V to 6V operating range

Ì Brownout detection

Ì Twice the 8051 execution time

Ì Two 16-bit counters/timers

Ì Two analogue comparators

Ì Full duplex UART

Ì I 2 C comms port

each

Ì Watchdog timer

Ì Active low reset

Ì Configurable oscillator

Ì LED drive capability

Ì Up to 18 I/Os

SEM776

1+

Price Each

10+ 100+

87

87

Mftr.

PS

PS

Pins

20

20

Description

8-bit CPU, 4Kb OTP PROM, 128 bytes RAM - 20MHz ..............................

8-bit CPU, 4Kb OTP PROM, 128 bytes RAM - 20MHz ..............................

Mftrs. List No.

P87LPC764BD

P87LPC764BN

Order Code

¿

309-5721

309-5733

80C5X Starter Kits

Three separate development boards, designed for Farnell by Bluebird Electronics, for

Philips 80C552, Infineon 80C515/535 and Infineon 80C517/537 8051 based microcontrollers. The product is aimed at engineers looking for a quick development board to test out their ideas before laying out the production design.

Each kit contains a screen printed double sided PCB with all port pins available to the developer, PLCC socket for the processor,

RS232 interface with driver IC, socket and decode for 8, 16 or 32K EPROM, 5 push buttons - one dedicated to reset, 2.5mm power socket, 12MHz crystal, driver IC with 8 LEDs, 200 hole patch area, circuit diagram and assembly notes.

Hardware kit for 80C552 micros

Hardware kit for 80C515/535 micros

Hardware kit for 80C517/537 micros

Order Code

638-900

638-912

638-924

Price Each

SEM320

87C750/751 Development Kits

Two kits are available for 87C750/751 development, designed to getting projects off the ground with minimum of effort and expense. The I/O is pinned out to give maximum flexibility during development and both boards handle the 24 pin DIL package. All the necessary components are included i.e. sockets, regulator, reset components, LED’s resonator etc. A circuit diagram and construction notes are also included.

The 87C75/751 Project Board (120-066) has an additional prototyping block, slide and push switches and connector for an external 9V supply.

Use in conjunction with DS750 Development Kit (485-068).

SEM225

87C750 HSK ......................................

87C750 PROJ.....................................

Order Code 527-749

Order Code 120-066 each each

712

Semiconductors and Passives

Prices are in Singapore Dollars and exclusive of GST

Semiconductors – Starter Kits

Keil - 8051 Software Development ToolsKEIL

The Keil PK51 Professional Developers Kit comprises of a comprehensive suite of development tools for the 8051 family. The Windows Integrated Development

Environment encompasses an optimising ANSI-C compiler, Macro Assembler,

Software Simulator and Target Debugger, Integrated Editor and a powerful Project

Management Utility. The C-compiler generates highly optimised code for any 8051 derivative and features microcontroller-specific language extensions allowing all resources of the target micro to be utilised.

Features:

Ì Windows Intergrated Development Environment compatible with Windows 3.11, 95 and NT

Ì Optimising ANSI-C compiler

Ì Macro Assembler

Ì Software Simulator and Target Debugger

Ì Integrated Editor

Ì Powerful Project Management Utility

Ì Supports code generation for most 8051 derivatives which feature either internal or external code memory

Device Support:

Ì Generic 8051/8052/87C families

Ì Atmel 89C and 89S families

Ì Dallas 80C320/520/530

Ì Philips 87C750/751/752

Ì Infineon 80C517

SEM681

PK51-2K, Keil PK51-2K - 8051 Tool Set.......

Order Code 121-058 each

Features:

Ì Supports programming of on-chip memory of most 8051/251 and Atmel AVR microcontrollers

Ì Supports programming of many Atmel serial and parallel EEPROM devices plus a selection of Atmel FLASH memories

Ì Powerful Windows Interface Software (compatible with Win 3.11, 95 and NT)

Ì Compatible with binary and Intel HEX files

Ì Accepts 8/20/40 pin DIL devices without adaptor

Ì Fast programming algorithims (many approved by manufacturer)

Ì Field upgradeable programmer by virtue of FPGA architecture

Ì Connects to PC parallel port

Device Support:

Atmel 89C, 89F, 89S, 90S (AVR) microcontroller families

Atmel serial EEPROM devices

Atmel parallel EEPROM family

Atmel FLASH memory family

Dallas 87C520

Intel 87C51-FA/FB/FC, 87C52, 251

Philips 87C51-FA/FB/FC, 87C52

Temic 87C51, 87C52, 251

Note: not all devices may be supported within a family

SEM356

MPW-PLUS (UK) Micro-Pro PLUS Programmer

MPW-PLUS (EU) Micro-Pro PLUS Programmer

Re-programming Adaptor

PLCC 44 Adaptor

SOIC 20 Adaptor

Order Code

111-715

327-0294

790-151

701-040

701-051

Price Each

Gemini-1 - ISP Programmer for Philips 8051 Flash

Microcontrollers

Keil PK51 2K to 8K Upgrade KEIL

This software package allows an existing user of the Keil ‘PK51-2K’ 8051 Toolset to upgrade to a version which can generate up to 8K bytes of executable program code.

The upgrade includes floating point mathematical libraries making it ideal for scientific and educational projects. A full suite of reference documentation is also included.

Features:

Ì Upgrade from PK51-2K to 8K bytes version

Ì Integrated Development Environment (IDE) including an ANSI C Compiler, Macro

Assembler, project management utility and software simulator/debugger (limited to

8K total code output)

Ì Floating point mathematical libraries making it ideal for scientific/educational projects

Ì Full Keil PK51 Reference Manual Set

Ì Supports most popular 8051 devices

SEM762

PK51-8K-UPG Keil PK51 2K to 8K

Upgrade ......................................

Order Code 302-2262 each

Micro-Pro PLUS device

Programming System

Supports Atmel, Dallas, Intel, ISSI, Philips, Temic, etc.

Gemini-1 is a CE compliant programmer, supports In-System Programming (ISP) of the Philips 89C51Rx+ FLASH Microcontroller Families using the serial port of the target microcontroller.

Features: Ì Supports In-System Programming (ISP) of the Philips

89C51Rx+ FLASH Microcontroller Family

Ì Connects to PC serial (COM) port using cables supplied

Ì ISP cable connects to user target system via 10-way header

Ì Obtains power (+5V) from the target system

Ì Generates +12V Vpp on-board the programmer

Ì Powerful ‘Programmer Interface Software’ (compatible with

Win 3.1, 95, 98 & NT)

Ì Field upgradeable programmer firmware

Device support: Ì Philips: 89C51RA+, 89C51RB+, 89C51RC+, 89C51RD+

SEM839

EQ-GEM 1, Gemini-1 ISP Programmer ........

Order Code 316-6077 each

10

Ex-stock Products

The world’s largest choice of electronic and industrial products available worldwide for same day despatch.

This programming system has the ability to program the on-chip code/EEPROM space of most 8051 microcontroller derivatives from Atmel, Dallas, Philips, Intel ISSI and

Temic. Support for the majority of the Atmel AVR microcontroller family is also offered together with a selection of Atmel products including EEPROM and FLASH memories.

The powerful Windows interface software supports code and data buffers, setting of special option bits and a device auto-program utility. System contents include a programmer, parallel cable, software and mains power supply adaptor.

Internet www.farnell.com

Sales Tel (65) 788 0200 Sales Fax (65) 788 0300

713

Semiconductors – Starter Kits

8051 Based Microcontrollers —

Continued

C51 Starter System

8051 FLASH Microcontroller Starter System

EQ-89S-ST1 Atmel 8051 Professional

Starter System...............................

Order Code 302-2237

Support Tools for the 8051 family

89C-1051/2051 Demo Module

SEM763

each

10

This CE compliant starter system provides a comprehensive suite of development tools for the Atmel 8051 microcontroller family. The system hardware comprises of a combined parallel and serial device programmer, feature-packed evaluation module, In-

System Programming (ISP) cable and mains power supply. Also included is a powerful

Keil Integrated Development Environment (IDE) featuring an editor, Macro assembler,

C compiler, linker, software simulator and HEX creator. Sample programs are supplied to help the developer to quickly become familiar with the 8051 microcontroller family and C. It is possible to download code from the IDE straight to the sample AT89S8252 microcontroller fitted in the evaluation module without removing the device from the socket.

Ì Programs Atmel 89C 20-pin microcontrollers in the ZIFsocket

Ì Programs Atmel 89S microcontrollers in-system via ISP cable

Ì Evaluation module supplied features 8/20/40 pin microcontroller sockets, LEDs, switches, serial communications etc.

Ì Includes Keil PK51-2K 8051 Toolset (limited to 2K total code output)

Ì Fast programming algorithms (many approved by manufacturers)

Device Support:

Atmel (parallel prog mode) – AT89C1051, AT89C2051

In-System Programming – AT89S8252, AT89S53

SEM397

EQ-8051-ST1 (UK) FLASH Starter System........

Order Code 111-806

EQ-8051-ST1 (EU) FLASH Starter System........

Order Code 327-0300 each each

Atmel 8051 Professional Starter System

An evaluation module for the 89C-1051/2051 FLASH microcontrollers.

Features include:

Ì 8 multiplexed I/O lines - LED/Push button

Ì RS-232 Serial communications up to 120K Baud

Ì Inexpensive ADC using on-chip comparator

Ì Accepts either Atmel 89C1051 or 89C2051

Ì Supplied complete with pre-programmed 89C2051 and PC serial cable

Ì C51 software provided includes pitch generation, ambient light meter, serial communications and DVM

Ì Credit card size - 85 33mm

SEM398

AT-89CX051-DEMO Atmel 89C-1051/2051

Demo Module.................................

Order Code 790-357 each

89C-1051/2051 OEM Module

This is a CE compliant starter system for engineers wishing to learn programming and development with 8051 microcontrollers. The system hardware comprises of a Micro-

ISP serial programmer, an Atmel AT89S8252 microcontroller which features 8K of

FLASH and 2K of EEPROM on-chip memory, an 89S Personality Module, a feature packed Evaluation Module and a prototyping module. The 89S Personality Module comes fitted with an AT89S8252 device that can be programmed In-System. The

Evaluation Module features LEDs, push buttons, piezo sounder and serial communications and the Prototyping Module features an area where small circuits can be developed. Both the Evaluation and Prototyping Modules plug into the Personality Module providing a completely re-usable development system. The Keil C Compiler is included

(limited to 2K total code output) providing a powerful and flexible development environment.

Features:

Ì Integrated Development Environment (IDE) including an ANSI C Compiler, Macro

Assembler, project management utility and software simulator/debugger (limited to

2K total code output)

Ì Microcontroller 89S Personality Module featuring 40-pin socket and an ISP header

Ì Evaluation Module featuring LEDs, push buttons, piezo sounder, RS232 serial port and a Prototyping Module featuring an area for small circuits to be developed.

These modules plug into the Microcontroller Personality Module

Ì Micro-ISP serial programmer with Windows software (compatible with Win 95, 98 and NT)

Ì Connects to a spare PC serial (COM) port

Ì Field upgradeable programmer firmware

Device Support

Atmel AT89S8252, AT89LS8252, AT89S53, AT89LS53

714

Semiconductors and Passives

An OEM module for evaluation or design-in into custom products.

Features include:

Ì Supports Atmel 89C1051 and 89C2051 processors

Ì RS-485 Serial hardware - allows up to 32 modules to be networked together

Ì RS-232 Serial hardware - allows connection to terminal (supports one hardware and one software UART)

Ì 1K bytes EEPROM memory for non-volatile data storage

Ì A/D circuitry using microcontroller on-chip comparator

Ì All microcontroller I/O lines brought out to header

SEM399

AT-89CX051-OEM Atmel 89C-1051/2051 OEM Module

Order

Code

790-369

Price

Each

Micro-ISP Programming System

Prices are in Singapore Dollars and exclusive of GST

Semiconductors – Starter Kits

The programmer downloads the program serially, bit by bit, to the microcontroller. By utilising the ISP features of the Atmel 89S and 90S microcontroller families, the devices can be reprogrammed without removing from the target board.

The programming system includes the 8051 socket stealer which allows you to add In-

System-Programmability to existing hardware by using an 89S8252 in place of any generic 8051 40-pin DIL microcontroller.

Features include:

Ì Programmer connects to parallel port

Ì No power supply required

Ì Windows-based software

Ì 8051 socket stealer module

Ì AT89S8252 microcontroller

Ì Atmel CD-ROM Data Book

Ì Full documentation

SEM450

AT-89S-ISP-SYSTEM ...........................

Order Code 795-239 each

8051/AVR Socket Stealer

795-252

795-264

The Socket Stealer Module adds In-System Programmability to existing hardware by simply plugging into the 40-pin or 40-pin microcontroller socket. For 8051 devices the microcontroller is replaced with an Atmel 89S8252 which is then plugged into the

Socket Stealer. For AVR devices the existing microcontroller is plugged into the Socket

Stealer. Future software revisions can be made without disturbing the microcontroller by simply connecting a Micro-ISP or Activ8r programmer to the ISP header of the

Socket Stealer and reprogram in-system.

Features

Ì Adds In-System programming to existing non-ISP circuit board designs

Ì Ideal for code development purposes, allowing firmware to be developed and tested quicker and more easily

Ì Isolates MISO, MOSI and SCK microcontroller pin from target circuit during programming avoiding any contention problems

Device Support

Atmel AVR - Atmel AT90S8515/4414

8051- Atmel AT89S8252

SEM760

SS-89S252-P Dual In line 40-pin Socket Stealer (8051)

SS-89S252-J PLCC 44-pin Socket Stealer (8051)

SS-89S Dual In Line 20-pin Socket Stealer (8051)

SS-90S8515-P Dual In Line Socket Stealer (AVR)

SS-90S8515-J PLCC 44-pin Socket Stealer (AVR)

Order Code

795-252

795-264

120-996

302-2365

303-1068

Price Each

AVR Professional Starter System

This CE compliant starter system provides a comprehensive suite of development tools for the Atmel AVR RISC microcontroller family. The system hardware comprises of a combined parallel and serial device programmer, feature-packed evaluation module, In-

System Programming (ISP) cable and mains power supply. Also included is a powerful software Integrated

Development Environment (IDE) featuring an editor, AVR Macro

Assembler, AVR BASIC LITE compiler and software simulator. Sample programs are supplied to help the developer to quickly become familiar with the AVR microcontroller family. It is possible to download code from the IDE straight to the sample AT90S1200 microcontroller fitted in the evaluation module without removing the device from the socket.

Features:

Ì Programmer supports parallel and In-System Programming (ISP) of Atmel 90S

(AVR) RISC microcontrollers

Ì Evaluation module supplied features 8/20/40 pin microcontroller sockets, LEDs, switches, serial communications etc.

Ì Integrated Development Environment (IDE) including editor, BASIC compiler

(restricted to 1Kbytes code) assembler and software simulator

Ì Programmer/Evaluation module connect to PC serial (COM) port

Ì Meridian for Windows-Programmer Interface Software (compatible with Win 3.11,

95 and NT)

Ì Field upgradeable programmer firmware

Ì CE compliant

Device Support:

AT90S1200, AT90S2343, AT90S2313, AT90S4414, AT90S8515

SEM545

AVR2-ST (UK) AVR Professional Starter

System.........................................

Order Code 111-764

AVR2-ST (EU) AVR Professional Starter

System.........................................

Order Code 327-0312 each each

Atmel AVR Professional Development System

10

Micro-ISP Series IV - Atmel Microcontroller ISP System

This CE compliant programmer supports In-System

Programming (ISP) of the Atmel 89S

(8051), 90S (AVR) and ATmega (AVR)

FLASH microcontroller families. The programmer connects to any standard PC serial port and comes complete with a

10-way serial programming cable which connects to the user target system.

Programming is via a 3-wire SPI bus plus control of the microcontroller

RESET line.

Features:

Ì Standard version operates with a supply voltage range of 4.6V to 6.0V. Low Voltage version operates with a supply voltage range of 3.0V to 6.0V

Ì Connects to a PC serial (COM) port

Ì Serial Programming ribbon cable connects to user target system

Ì Obtains power from user target system

Ì Meridian for Windows - Programmer interface software (compatible with Win 3.1,

95, 98 and NT)

Ì Field upgradeable programmer firmware

Ì Programs Atmel 89S (8051), 90S

(AVR) and ATmega (AVR) microcontrollers In-System

Device Support

Atmel AVR - AT90S1200(A), AT90S2313, AT90S2323, AT90LS2323, AT90S2343,

AT90LS2343, AT90S4414, AT90S8515, AT90S4434, AT90LS4434, AT90S8535,

AT90LS8535, ATmega103(L), ATmega603(L)

Atmel 8051 - AT89S8252, AT89LS8252, AT89S53, AT89LS53

SEM759

UISP-S4 Standard Micro-ISP Serial

Programming System ......................

Order Code 302-2286

UISP-LV4 Low Voltage Micro-ISP Serial

Programming System ......................

Order Code 302-2298 each each

This CE compliant development system provides a comprehensive suite of development tools for the Atmel AVR RISC microcontroller family. The system hardware comprises of a combined parallel and serial device programmer, ‘Classic’ AVR

Microcontroller Personality Module, feature-packed Evaluation Module, Prototyping

Module, In-System programming (ISP) cable and UK mains power supply. Also included is an Integrated Development Environment (IDE) featuring an editor, macro assembler, optimised BASIC compiler and software simulator. Extensive on-line help and many examples are provided to help reduce the learning curve.

Features:

Ì Integrated Development Environment (IDE) including editor, BASIC compiler (limited to 1K code size), assembler and software simulator. The IDE also includes a macro assembler, support for in-line assembly and linking with pre-assembled object files

Ì Windows programmer software (compatible with Win 95, 98 and NT)

Ì Classic AVR Microcontroller Personality Module which plugs into the Evaluation and Prototyping Modules

Ì Evaluation module features eight, 20 and 40-pin microcontroller sockets, LEDs, switches, piezo buzzer, serial communications and LCD connector. The Prototyping

Module features an area for small circuits to be developed.

Ì Connects to a spare PC serial (COM) port

Ì Field upgradeable programmer firmware

Device Support

AT90S1200(A), AT90S2313, AT90S2323, AT90LS2323, AT90S2343, AT90LS2343,

AT90S4414, AT90S8515, AT90S4434, AT90LS4434, AT90S8535, AT90LS8535,

ATmega103, ATmega603

SEM764

AVR-DV1 (UK) Atmel AVR Professional

Development System .......................

Order Code 302-2249

AVR-DV1 (EU) Atmel AVR Professional

Development System .......................

Order Code 327-0324 each each

continued

Internet www.farnell.com

Sales Tel (65) 788 0200 Sales Fax (65) 788 0300

715

10

Semiconductors – Starter Kits

8051 Based Microcontrollers —

Continued

AVR BASIC IDE

AVR BASIC is a powerful Integrated Development Environment (IDE) for the Atmel AVR range of RISC microcontrollers. The BASIC compiler produces very tight AVR machine code by translating the BASIC source into actual run-time assembly code. The Toolset incorporates an editor, optimising BASIC compiler, macro assembler and HEX creator. Assembled output can be viewed along with the source code. An extensive collection of examples demonstrating how to program different aspects of the AVR microcontrollers is included. Compatible with Windows

95, 98 and NT.

Features:

Ì Integrated Development Environment (IDE) including editor, BASIC compiler, assembler and software simulator. It also includes a macro assembler and support for in-line assembly and linking with pre-assembled object files

Ì Support for floating point mathematics (full version only)

Ì Compiled BASIC generates highly optimised AVR machine code. Not a run time interpreter, minimal speed/code overhead compared with assembler

Ì Comprehensive suite of code examples available

Ì Breaks the cost barrier for small projects. Ideal for educational, hobbyist and professional use

Ì Assembly-like commands can be freely mixed with BASIC code

Ì Not a run-time interpreter, minimal speed/code overhead compared with assembler

Ì Supports direct access to SRAM, Registers and EEPROM memory

Ì 1K maximum code size with Lite version, unrestricted code size with full version

Device Support

AVR BASIC Lite - AT90S1200

AVR BASIC Full - AT90S1200, AT90S2313, AT90S2323, AT90LS2323, AT90S2343,

AT90LS2343, AT90S4414, AT90S8515, AT90S4434, AT90LS4434, AT90S8535,

AT90LS8535, ATmega103(L), ATmega603(L)

SEM757

AVR-BAS-LITE AVR BASIC Lite ..............

Order Code 111-788

AVR-BAS-FULL AVR BASIC Full Version...

Order Code 302-2330 each each

Imagecraft AVR C Compiler

This is an ANSI C compiler for Atmel AVR devices with many features only found in more expensive compilers. An Integrated

Development Environment (IDE) is provided which includes a flexible editor, target

Configuration Wizard and project builder. The compiler includes optimisation, fast compilation, embedded assembly and support for interrupt functions. A comprehensive printed manual and source code examples are provided to aid learning.

Features:

Ì Integrated Development Environment with automatic rebuilding including a fully

ANSI C compliant AVR compiler (compatible with Windows 95, 98 and NT)

Ì Configuration Wizard to ease loading, adding and changing target configurations and a flexible editor with syntax highlighting

Ì Full support for floating point data types (IEEE single precision) and long filenames

Ì Built-in peephole optimiser

Ì Relocatable assembler, linker and librarian

Device Support

Atmel AT90S2313, AT90S2323, AT90LS2323, AT90S2343, AT90LS2343, AT90S4414,

AT90S8515, AT90S4434, AT90LS4434, AT90S8535, AT90LS8535, ATmega103(L),

ATmega603(L)

SEM761

IM-AVRC-1 Imagecraft AVR C Compiler ...

Order Code 302-2274 each

AVR ICE200 In-Circuit Emulator

Keyfob Starter Kit KANDA SYSTEMS

This is a new development in the range of programmers for the ATMEL AT90S series microcontrollers. The programmer consists of a keyfob style case with all the electronics on board to store and download programs of upto 64KBytes of program code. The keyfob is ideal for situations where a new program needs to be loaded onto a device which is in a remote location such as installed equipment on a customer’s premises. The programmer does not need any technical expertise to operate, code updates can be achieved by non-technical personnel.

Code is Uploaded onto the keyfob from a PC parallel port via a supplied adaptor and a windows based setup ‘wizard’ guides you through the simple routines to download all software including serial numbers and configuration information such as code protection.

The target board needs to have the connections available for serial programming.

Spare keyfobs are available.

Features:

Ì Programs ALL AT90S devices

Ì 64Byte program capacity

Ì Programs Data space

Ì Programs Fuses (on devices which support serial fuse programming)

Ì Programs Lockbits

Ì Programs an ID into the keyfob

Ì All software supplied on 3.5”disk

Ì All cables and adaptors needed for upload and download are supplied

Ì Battery included (GP 23A, 12V)

SEM856

Keyfob Starter Kit .................................

Order Code 318-7688

Spare Keyfob ......................................

Order Code 321-6755 each each

The ICE200 is a true Real-Time In-Circuit Emulator for the Atmel AVR microcontroller family. The system offers full speed emulation of most AT90S and AT tiny derivatives including emulation of memory, I/O and on-chip peripherals. Full symbolic debugging in ‘C’ or assembler is supported using the powerful ‘AVR Studio’ IDE from the Atmel.

(AT Mega family not supported.)

The ICE200 comes complete with target pods for 8, 20, 28 and 40 pin standard and

A/D derivatives.

Features:

Ì Non-intrusive single-chip emulation of processor core, I/O, peripherals and EEP-

ROM memory using dedicated AVR emulator chip from Atmel

Ì Emulation pods for 8, 20, 28 and 40 pin DIL devices included

Ì Full support for devices featuring A/D converters

Ì Supplied with AVR Studio - Integrated Development Environment:

- integrated assembler

- commands include: Run, Break, Trace, Into, Step over, Step out, Run to cursor,

Reset

- Full visibility of, and access to the target AVR Register File, SP, PC and Memory contents

- Unlimited number of breakpoints

SEM892

AVR ICE200 In-Circuit Emulator

Order Code

330-6070

Price Each

Arizona Microchip PIC Development Tools

PICSTART Plus - Low Cost Development/Evaluation System

Supports all PIC16/PIC17 families (Replaces PICSTART-16B1 and PICSTART-16C)

716

Semiconductors and Passives

The CE compliant PICSTART Plus development system from Microchip provides a highly flexible, low cost microcontroller design tool for all PIC 8-bit, programmable devices (DIL packages up to 40 pins).

PICSTART Plus operates on any PC compatible machine running under the Windows ®

3.1 and '95 systems. PICSTART Plus is easy-to-use and features Microchip's highly acclaimed MPLAB ™ integrated development environment, with its built-in editor,

MPASM assembler and Windows based MPLAB-SIM simulator. Full documentation,

MPLAB/Data on CD-ROM, development programmer and a device sample are also included.

Supplied with a universal power supply. UK or International power supply optional.

UK mains plug lead available separately.

SEM389

Prices are in Singapore Dollars and exclusive of GST

PICSTART Plus Development/Evaluation System

Power Supply 9V, 500mA (UK 240Vac)

Power Supply 9V, 900mA (IEC 110–240Vac)

UK mains plug lead

European mains plug lead

PIC IN A BOX – Ultimate PIC Starter Package

Semiconductors – Starter Kits

Order Code

704-740.

110-899.

110-711.

439-319

210-699

Price Each

The MPLAB-ICD consists of three basic components: ICD module, ICD header and ICD demo board.

System Features:

In-Circuit run-time debugging:

Ì Real-time code execution

Ì Single step

Ì One hardware breakpoint

Ì Variable watching

Ì 3.0V to 5.5V

Uses Microchip's free MPLAB IDE:

Ì Editor

Ì Assembler

Ì Linker

Ì Simulator

Ì 32kHz to 20MHz

Ì Development and Evaluation kit supporting PIC16F87x

Ì PC communication via serial interface at speeds up to 57600 baud

Ì Project Manager

Ì Source level symbolic debug

Ì Interface to ICD and other hardware tools

Devices Supported:

PIC16F873/874/876/877

Also included are MPLAB-ICD User's Guide and MPLAB-ICD Tutorial.

SEM777

MPLAB-In-Circuit Debugger .................

Order Code 307-0645 each

EPIC Plus Programmer

PIC IN A BOX is a complete starter kit for those intending to work with the PIC 8-bit microcontroller. Contents include a PICSTART PLUS (programmer, editor, assembler/ simulator software, samples, power supply, all necessary cables and a copy of the

Microchip data library on CD-ROM), a copy of “The Beginners Guide to the PIC” and

“PIC Cookbook”, a Project Board, PIC Soft with additional projects aimed at the beginner and starter guidance notes.

Exclusive to Farnell in conjunction with Nigel Gardner

.

SEM407

Price Each

PIC IN A BOX Starter Package

Power Supply 9V, 500mA (UK 240Vac)

Power Supply 9V, 900mA (IEC 110–240Vac)

UK mains plug lead

European mains plug lead

Order Code

789-288

110-899

.

110-711

.

439-319

210-699

Programming Adaptors

Ì Low Cost Programmer for: PIC12Cxxx, 16C55x, 16C6xx,

16C7xx, 16C8x,16F8x

Ì Upgradeable software for future Micros

Ì Variety of ZIF adapters available

Ì In-Circuit Serial Programming adapter available

Ì Operates on power supply, 12Vac, or

2xPP3 batteries

Ì Includes free Macro Assembler

Ì Supports Windows ’95, NT and DOS

The EPIC Plus is a development level programmer for the mid-range PIC micros.

Included with the programmer is an 18-pin socket for programming 8 and 18 pin DIP packages. ZIF adapters are available to program 28 and 40 pin DIP and surface mount devices. An In-Circuit Programming adapter for the 16F84 or 16C84 allows for quick erasing and programming, avoiding continual transfer between the programmer and the target system.

SEM617

MEL-EPIC Programmer ............................

MEL-4028ZFR 40/28 pin ZIF socket..............

MEL-8SOICCFR 8 pin SOIC adapter..............

MEL-18SOICCFR 18 pin SOIC adapter...........

MEL-28SOICCFR 28 pin SOIC adapter...........

MEL-ICPAFR In-Circuit Programming adapter .

Order Code 116-816

Order Code 116-828

Order Code 116-830

Order Code 116-841

Order Code 116-853

Order Code 116-865 each each each each each each

10

PIC Tutor and Development Board (PIC-TDB)

Supports PIC12C5xx, PIC16C5x/6x/6xx/7x/84, PIC17C4x/7x

698-180 698-179 797-005

To assist with product development, the following adaptors have been designed for use with the PICSTART Plus programmer.

SEM689

8 pin SOIC to DIL socket module for PICs

14 pin SOIC to DIL socket module for PICs

18/28 pin SOIC to DIL socket module for PICs

44 pin PLCC socket module for PICs

68 pin PLCC socket module for PICs

84 pin PLCC socket module for PICs

Order Code

698-180

113-554

698-179

797-005

306-0809

303-7356

Price Each

MPLAB-ICD In-Circuit Debugger

The MPLAB-ICD is a powerful development tool based on the FLASH PIC16F877 and can be used to develop this and other PICmicro microcontrollers from the 16Cxx family. It uses the In-Circuit Debugging capability of the PIC16F87x and In-Circuit Serial

Programming (ICSP) protocol to offer a cost effective In-Circuit FLASH programming and debugging from the graphical user interface of the MPLAB-IDE. This allows a designer to develop and debug source code by watching variables, single-stepping and setting break points. The MPLAB-ICD also programs FLASH PIC16F87x family.

Internet www.farnell.com

The PIC-TDB is a useful support tool aimed at a wide range of users from beginners to experienced hardware engineers. The board is designed with features which make it ideal as a first step educational tool as well as an advanced and powerful hardware development platform.

With numerous example programs using many features on board, an inexperienced user can familiarise with the assembly language, program structure and internal operation of the PIC device. Full listings of the examples are given, each providing a new useful function for the user to adopt in a specific function, such as driver routines for interfacing the PIC to LCDs, 7 segment LEDs, ADCs, DACs, matrixed keypads, serial communications to EEPROMs and more.

Features:

Ì LCD (8 2 characters with parallel interface)

Ì 4 3 matrix keypad

Ì LED (4 digit with serial interface)

Ì Real-Time-Clock (day, date, time) with serial interface

Ì EEPROMs (SPI and I 2 C serial interfaces)

Supplied with UK power supply only.

Ì 12-bit ADC (serial interface)

Ì 12-bit DAC (serial interface)

Ì Programmable gain amplifier

Ì RS232 interface port

Ì 8 LED indicators

Ì 2 PWM outputs

Ì On-board voltage regulator

Ì Highly configurable

Ì Supplied with software examples

SEM661

PIC-TDB, PIC Tutor and Development Board ...

Order Code 117-717 each

continued

Sales Tel (65) 788 0200 Sales Fax (65) 788 0300

717

Semiconductors – Starter Kits

Arizona Microchip PIC Development Tools —

Continued

PIC Millennium Board

The Millennium Board Starter Kit contains all the necessary components to start learning the intricacies of the PIC and is aimed at both Engineers and Students. Students can use the board to help form the core of their learning experience and also use it in "real world" applications in industry.

Once the board is assembled the user can concentrate on the software development. The board is laid out in an uncluttered way with none of the peripheral devices or I/O pins being dedicated. This concept enables maximum flexibility for project development.

The PCB has component ident and pin function information and comprises:-

Basic items

- regulator and reset components, choice of a 4 or 8MHz oscillator module to drive the PIC, prototyping block for project expansion, sockets for 40, 28 (narrow), 18 and 8 pin PIC's.

Opto

- alphanumeric LCD display module (16 character x 2 line) with separate backlight control, 4 seven-segment LED displays, 6 undedicated LED's.

I/O

- 3 x 4 keypad for data input, dual RS232 ports, thermistor, potentiometer, 4 switches, 4 push buttons.

For programming

- connectors are provided for an external ICSP programmer for in situ programming.

Full circuit diagram and construction notes are provided.

A 3.5" disk accompanying the kit contains source code examples for both CCS-C compiler and assembler for projects based on the board. Examples of applications include LED flashers, LED to LCD display driving, keyboard interfacing, A/D routines, RS232 interfacing and many more. Each project is supplied with relevant wiring information and is fully commented to assist the user in following the program.

The user will need a programmer such as the PICSTART Plus (704-740) to develop the software and program a PIC Micro.

SEM690

PIC Millennium Board ............................

Order Code 120-030

PIC Millennium Board - Assembled ............

Order Code 324-9505 each each

10

PIC Tutorial Board ARIZONA TECHNOLOGIES

The PIC tutorial, from Arizona Technologies Ltd., offers a system for getting started with the Microchip PIC range of microcontrollers. It is based on demonstration and prototyping PCB, and a Windows help file software suite. It takes the user from first principles of microcontrollers through to advanced programming and hardware design of all facets of a PIC based embedded application.

Device operation is extensively covered with all major peripherals explained by actual working designs. The development tools such as editor, assembler, simulator, in-circuit emulators and programmers are dealt with as are design tips and techniques.

For more advanced applications the add-on tutorial modules are available, each with tutorial sofware.

The kit includes:

Ì Demonstration/prototyping board

Ì Tutorial software suite disk

Ì Microchip CD-ROM

Ì Microchip CD-ROM

Ì PCB circuit diagram

Ì Product registration form

SEM538

PIC Tutorial Board

......................................................................................................................................................................................................................

Tutorial 1 - Keyboard interface -

supplied with 4 4 keypad. Demonstrates how to interface the PIC to the keypad ................................................................

Tutorial 2 - LCD module interface -

supplied with 2 16 character module. Demonstrates how to interface the PIC to a display.............................................

Tutorial 3 - Interfacing Dallas Touch Memory -

supplied with Touch memory. Demonstrates interfacing and applications for tagging and tracking through to access control.............................................................................................................................................

Tutorial 4 - Swept Tone Generator -

supplied with miniature loudspeaker and amplifier components. Demonstrates the PWM channel available on the PIC..

Tutorial 5 - Real Time Clock application -

supplied with 32.768kHz watch crystal. Shows how to generate a real time clock with timer in the PIC ................

Tutorial 6 - Input Capture/Output Compare -

Shows capture and compare facilities available on the PIC..................................................................................

Order Code

670-431

670-443

670-492

670-455

670-467

670-479

670-480

Price Each

Low Cost PIC Demonstration Boards PIC Project Board 1 and 2

PICDEM 1/2/14A/17 are simple boards which demonstrate the capabilities of several

PICmicro families. All necessary hardware is included to run basic demonstration programs which are supplied on a disk. The user can program the samples provided with the PICDEM on PICSTART Plus or PROMATE-II and easily debug/test the sample code.

The user can connect the PICDEM with MPLAB-ICE and download the sample code to the emulator and debug/test the code. A prototype area is provided for user hardware.

Included in each PICDEM kit is:

Ì PICDEM demonstration board

Ì Product samples

Ì Demonstration/tutorial software

Ì Complete documentation

SEM230

PICDEM-1 supports

PIC16C5x/62x/71, 17C4x.......................

Order Code 525-789

PICDEM-2 supports

PIC16C62/63/64/65, 16C72/73/74 ............

Order Code 563-481

PICDEM-3 supports PIC923 and PIC924 Order Code 315-4865

PICDEM-14A supports PIC14C000 .............

Order Code 111-570

PICDEM-17A supports PIC17C756/762/766 .................

Order Code 306-2235 each each each each

398.01

each

The PIC Project Boards are designed for development with any of the 18 pin PICs.

They can form the basic hardware for both education and prototype development. The kits are supplied in a strong plastic case to protect the completed board. All the necessary components are included i.e. regulator, reset components, LED's, speaker, 4MHz resonator etc.

A circuit diagram and construction notes are included together with a diskette giving application examples which can be used with the board. The Project Boards are best accompanied by a PICSTART PLUS (704-740) programmer.

Project Board 2 has an additional prototyping block and connector for an external 9V supply.

SEM229

PIC Project Board 1 .............................

Order Code 527-646

PIC Project Board 2 .............................

Order Code 120-054 each each

718

Semiconductors and Passives

Prices are in Singapore Dollars and exclusive of GST

PIC Hardware Starter Kits

These kits now have enhanced features. They are ideal for quick prototype evaluation, lab ideas, one off projects and demonstrations, as well as aiding the learning process whilst gaining a working knowledge of the PIC microcontroller.

The 8/18 pin board (459-884) handles the newer 8 pin PICs (12C508, 509, 671 etc.) together with 18 pin PIC - you can use both an 8 pin and 18 pin sockets simultaneously.

The 28 pin board (459-896) will handle all 16C5xx series of PICs in wide (0.6”) or narrow (0.3”) versions - not 16Cxx 28 pin.

All kits comprise 8 LEDs and series resistors, 5V regulator, reset components, socket strips and a 4MHz resonator. The PCB is approx. 48mm x 96mm enabling applications to remain compact.

The kits are best accompanied by a PICSTART PLUS (704-740) programmer.

SEM202

PCBC54 Hardware Kit for 8/18 pin PICs.....

Order Code .459-884

PCBC55 Hardware Kit for 28 pin PICs

(16C5xx) .......................................

Order Code .459-896 each each

PIC16C64/74 Hardware Kit and PIC16C63/73 Adaptor

Semiconductors – Starter Kits

PIC Trainer 1 ...................................

Order Code 300-3942

PIC Trainer Kit 1 ...............................

Order Code 300-3954

PIC Trainer 2 ...................................

Order Code 300-3980

PIC Trainer Kit 2 ...............................

Order Code 300-3991

PIC Block MC18D

This populated board is a high quality PCB designed to accept any

18 pin DIL PIC or

SCENIX microcontroller. Its use is not only confined to being a development board but also due to the features on board. It can also be integrated into a system as a finished product. The PIC BLOCK has an onboard power supply section, input conditioning, output drive of 500mA per channel and all connections are via PCB mounting screw terminals.

Features:

Ì 6 buffered and filtered inputs to cope with a range of input voltages and noisy environments. Input voltage range 3 to 24V DC

Ì 6 open collector digital outputs each capable of sinking 500mA

Ì Power source can be AC 7-20V, or DC 9-28V. A low current regulated 5V supply is available to power external circuits

Ì An on-board reset button is provided as is space for output pull-up resistors should they be required

Ì On board 4MHz resonator

Ì PCB construction all PTH and ground planed on both sides

Ì Dimensions 81 x 66 x 22mm with 4mm mounting holes

SEM888

PIC Block MC18D ..............................

Order Code 332-7980 each

PIC Panic Modules

each each each each

The kit has all the standard components featured in the 459-884 and 459-896 hardware kits above (8 LEDs, all I/O pinned, regulator, 4MHz resonator etc) but has the addition of a reset button, 4 undedicated push switches, RS232 female connector, RS232 interface driver, socket for an 8 pin

EEPROM, and a patch area of 200 holes for user development.

An adaptor is available to convert the PIC16C63/73 DIL pin out to fit into the 40 pin socket on the PIC16C64/74 board.

SEM2

PCB072 Hardware kit for PIC16C64/74 ......

PICCONV Adaptor for PIC16C63/73...........

Order Code 630-639

Order Code 703-473 each each

PIC Trainer Project Boards

The PANIC modules are a means to quickly produce professionally housed prototyped

PIC projects. Two ready assembled modules have been developed to enable prototyping with either 18 or 28 pin 16Cxx PICs and then simply replace the cover and mount accordingly.

The modules comprise a socket for the PIC with all the I/O brought out, a small protoblock, a 78L05 regulator and a socketed 4MHz resonator.

With the addition of a COMMS module, remote data transfer is possible on either

RS232 (2xTX, 2xRX pins) or RS485 (with terminating resistor).The modules plug directly into the proto-board and are fitted with screw connectors for external cable connections.

Use with a PICSTART Plus Programmer (704-740) and the PIC of your choice.

SEM691

PANIC18 module

PANIC28 module

COMM232

COMM485

Order Code 113-578

Order Code 112-203

Order Code 118-072

Order Code 118-084 each each each each

continued

These populated boards are ideal for prototype evaluation and for learning PIC programming. The boards have been designed so that the user can start with a working

PCB to reduce development time. The project boards are supported by ‘The Engineers

Guide to Programming PICs’ book, Order Code 183-143. PIC Trainer 1 refers to program examples with some code modifications shown in the last chapter.

PIC Trainer 1

Features push button inputs and LED outputs with provision for a

ULN2803 Darlington driver.

Ì Suitable for 18-pin devices (16C54, 16C56, 16C71 and 16C84)

Ì Socket provided for a Darlington driver (ULN2803)

Ì 4 input switches connected to port A

Ì 8 LEDs connected to port B

Ì Suitable projects include push button switching, LED pattern generator, delay timers and logic replacement

PIC Trainer 2

Features 4 3 data entry keypad, 4 push button inputs and 4 seven segment display drivers.

Ì Suitable for 28-pin devices (16C55 and 16C57)

Ì 4 3 keypad connected to ports A and B

Ì 4 input switches connected to port B

Ì 4 7 segment LED displays connected to port B

Ì Suitable projects include digital clock, simple calculator, key scan and HEX to 7 segment display

Both project boards have:

Ì ZIF socket for easy insertion of the PIC

Ì 4MHz crystal for 1µs instruction time

Ì 5V regulator and a diode to protect against incorrect voltage polarity

The two boards are also available in kit form, without the ZIF sockets.

SEM768

Any Questions?

Our technical help desk will provide the answers, free of charge.

Please call (65) 788 1922 or e-mail [email protected]

10

Internet www.farnell.com

Sales Tel (65) 788 0200 Sales Fax (65) 788 0300

719

Contents

Cleaning Products

Ionisation Equipment

Office Supplies

Packaging Materials

Personnel Grounding

Production/Handling Equipment

Storage

Test Instruments

Training & Education

Workstation Equipment

Workstation Kits

750

740

747

753

748

745

749

754

758

742

746

Semiconductors - Static Protection

11

11

Wrist Band Set

Semiconductors – Static Protection

Watch-style Wrist Band

Personnel Grounding

Ì Adjustable wrist-band and

2m ground cord set

Ì Anti-allergenic band

Ì In-built 1MΩ resistor

Ì 10mm socket to banana plug ground cord

Ì Crocodile clip included

Ì Replacements available separately

Ì Durable, attractive design

Ì Stainless steel, hinged links

Ì 10mm stud

Ì Lightweight (25g)

Ì For use with ‘coiled ground cords’ page

«438618»

STA87

Order Code

936-819

1+

Price Each

10+ 25+

Wrist Band Set

Order Code

738-700

Mftrs List No.

1+

JA68B

Price Each

10+ 50+

STA2

Adjustable Wrist Bands, Elasticated

Ì Unique adjusting method

Ì Re-adjustable

Ì Comfortable and lightweight, 8gm

Ì 4mm or 10mm stud

Ì No metal in contact with skin

Ì 120mm to 200mm circumference

Ì Choice of 3 colours

FOR SUITABLE GROUND CORDS SEE ‘COILED GROUND CORDS’ PAGE 742

STA3

4mm Stud

Red

Yellow

Blue

10mm Stud

Red

Yellow

Blue

Mftrs.

List No.

JA43R

JA43Y

JA43B

JA48R

JA48Y

JA48B

Order Code

518-414

518-426

738-712

518-438

518-440

738-724

1+

Price Each

10+ 50+ 100+

High Quality Heel Grounders and Toe Grounders

Ì High durability, conductive rubber heel/toe cups

Ì Comfortable fit

Ì Fray-resistant blue earth strap

Ì Optional sewn-in 1MΩ resistor

Ì Choice of styles:

(a) Reversible cup, with velcro adjustment

(b) Reversible cup, with stretch velcro adjustment

(c) Standard cup, with elasticated back

(d) Standard cup, with stretch velcro adjustment

NB.

Should be used with conductive flooring/matting

1+

Price Per Pair

10+ 50+

STA117

Style

With 1M

Resistor

Heel grounder

Heel grounder

Heel grounder

Heel grounder

Toe grounder

(a)

(a)

(b)

(c)

(d)

Without Resistor

Mftrs.

List No.

J8100ST

J8100B

J8105ST

J8106ST

J8205ST

ö

Order Code

168-336

335-8380

168-348

168-350

168-361

Heel grounder (a) J8100BZ ö

†Available until stocks are exhausted

335-8410

Heel Grounders and Toe Grounders

Disposable Wrist Straps

Termination

Crocodile clip

Spade

Mftrs.

List No.

JC111

JC112

Ì Ideal for visitors to an EPA

Ì 1.1 metres long

Ì Easy to use looped fitting

Ì Comfortable to wear - no adhesive parts

Ì Crocodile clip enables connection to any grounding point - no need for an EBP

Ì Individually packaged with full instructions on outer packaging

Ì Crocodile clip or spade termination

Ì Built in resistance

140

1+

Price Each

10+ 50+ 100+

Order Code

335-8367

335-8379

High Quality Wrist Bands

Ì Long lasting stainless steel

Ì Washable

Ì Fully adjustable – no loose links

Ì 4mm or 10mm studs

SPEIDEL

Heel Grounder

Heel Grounders

are used with flat soled shoes, and feature a durable, reversible conductive rubber heel cradle, and earth strap. Bright pink variant reminds operators to remove when not in use.

Toe Grounders

are used with high heeled shoes. Optional in-built 1MΩ resistor. Conforms with EN100015-1 when both grounders worn.

1+

Toe grounder

Price Per Pair

10+ 50+

STA14

Heel Grounders

Yellow

Bright Pink

Green (with 1MΩ resistor)

Order Code

434-425

681-179

681-167

Toe Grounders

Yellow

Green (with 1MΩ resistor)

438-650

681-180

†Available until stocks are exhausted

4mm stud

10mm stud

Order Code

162-796

162-802

740

1+ 10+

Price Each

25+ 50+

STA104

Semiconductors and Passives

Disposable Heel Grounders and Dispenser

Dispenser H=200, W=315, D=56

Ì Yellow polyester braid with conductive band

Ì Comfortable to wear

Ì Fitting instructions included

Ì Supplied on perforated strips in packs of 50

Ì Resistance <10 6 ohm

Ì Highly visible dispenser

Ì Free standing, or wall mounted

Ì Treated with anti-static coating

Ì Printed with user instructions and ESD logo

Prices are in Singapore Dollars and exclusive of GST

Heel grounders (pk. of 50)

Mftrs.

List No.

J8260

Order Code

168-373

Dispenser

(inc. 10 Heel grounders) J827

168-385

Semiconductors – Static Protection

1+

Price Per Pack

10+ 50+

STA116

Disposable Wrist Band Set

Ì One-time use only

Ì 1.2m length

Ì Copper foil construction

Ì Hypo-allergenic adhesive fixing

Ì Breathable non-woven backing material

Ì Full fitting instructions supplied

1+

Price Each

5+ 25+

Lightweight Wrist Bands and Ground Cords

Ì Comfortable, lightweight construction

Ì Fully adjustable

Ì Moulded thermoplastic outer layer

Ì Conductive interior insert

Ì Low particle emissions – clean room safe

Ì Choice of colours

Ì Low cost ground cords and wrist band/cord sets also available

STA105

1+ 10+

Price Each

25+ 50+ 100+

Mftrs.

List No.

Order Code

4mm Stud Wristbands

Blue 4620

Green

Purple

Maroon

Lime

4621

4622

4623

4624

10mm Stud Wristbands

Blue 4640

Lime 4644

162-644

162-656

162-668

162-670

162-681

162-693

162-700

1.5m Coiled Ground Cords

4mm Skt –

Banana plug

10mm Skt –

Banana plug

4610

4614

162-711

162-723

1.5m Ground Cord and Wrist Band Set

4mm blue wrist band 4650

162-735

4mm lime wrist band

10mm blue wrist band

10mm lime wrist band

4654

4670

4674

162-747

162-759

162-760

†Available until stocks are exhausted

Wrist Bands, Cords, Heel and Toe Grounders

Wrist Bands

Ì Adjustable, breathable fabric

Ì High-grip hinged closure

Wrist Band Sets (Includes Ground Cords)

Ì Adjustable, breathable fabric

Ì 1.5m usable cord length

Ì 360° rotational movement

Ì Supplied with crocodile clip

Coiled Ground Cords

Ì High strength, 1.5m lengths

Ì Unique strain relief at each end

Shoe Grounders

Ì Durable and comfortable

Ì Toe grounder used with high heeled shoes

Ì Used with conductive flooring

Ì In-built 1MΩ resisitor

STA100

1+

Price Each

10+ 50+

Wrist Band Sets

Adjustable, heavy duty

Adjustable, lightweight

Re-adjustable

Mftrs.

List No.

2214

2244

2259

Wrist Bands

Adjustable, 10mm stud

Adjustable, 4mm stud

Coiled Ground Cords

Lightweight, 10mm skt-10mm skt

2981

2204

2974

Shoe Grounders

Heel grounder, 1MΩ

Toe grounder, 1MΩ

2051

2053

† Available until stocks are exhausted

Order Code

996-816

996-828

996-841

996-830

996-920

996-877

996-968

996-981

Mftrs. List No.

2209

Order Code

595-573

Disposable Heel Grounders

1+

Order Multiple=10

Mftrs. List No.

Order Code

2045

595-603†

† Available until stocks are exhausted

10+

Price Each

10+

Price Each

100+

50+

Ì Reliable earth path

Ì Comfortable

Ì Suitable for flat heeled shoes

Ì One grounder on each foot recommended

Ì Simple to fit

500+

STA5

STA15

Wrist Bands, Stainless Steel Expandable

Ì Durable construction

Ì Conductive inner band, insulative outer

Ì 10mm stud fastening

Ì Adjustable supplied with 4 clip-on extension links

Ì Tested to MIL STD 202 Method 101

Ì Conforms with EN100 015-1

Mftrs. List No.

23-0563=178-436,

23-0561=178-438,

23-0562=178-437,

23-0564=179-953

FOR SUITABLE GROUND CORDS SEE ‘COILED GROUND CORDS’ PAGE 742

STA4

Small

Medium

Large

Adjustable

Wrist

Circumference

130

150

170

Order Code

178-436

178-437

178-438

.

179-953

1+

Price Each

10+ 25+

Statpad

Shock ProtectorsSTATPAD

Ì Avoids painful static shocks

Ì Simply touch statpad first to discharge static build-up

Ì Self-adhesive touch pads adhere to most surfaces

Ì Use wherever static strikes e.g. office, factory, filing cabinets

Ì Key fob useful for the car

Ì Supplied with instructions for use

Touch pad H=2, W=43, D=23

Key Fob H=2, W=43, D=85

STA77

1+

Price Per Pack

5+ 10+ 50+

Order Code

Touch pads (pack of 10)

Key Fob (1 per pack)

681-489

681-477

† Available until stocks are exhausted

11

Internet www.farnell.com

Sales Tel (65) 788 0200 Sales Fax (65) 788 0300

741

11

Semiconductors – Static Protection

Protective Operator Pad

Workstation Equipment

Ground Cords

Ì Large choice of lengths, styles and teminations

Ì The lightweight coiled cords are ideal for use with wristbands

Ì Straight cords used with bench mats and fixed earthing points

Ì 4mm banana plug terminations include crocodile clips, except where indicated

Ì All socket terminations incorporate a 1MΩ resistor

Ì Bench mat ground cord has a moulded protective cover to resist accidental damage

Ì Conforms with IEC 61340-5-1, EN100 015-1

End-to-end resistance (banana plug termination)

(two socket terminations)

1.0MΩ ±5%

2.0MΩ ±5%

STA6

Terminations

Coiled Cord, Yellow

B/Plug + 4mm skt

B/Plug + 10mm skt

10mm socket + 10mm skt

Coiled Cord, Black

B/Plug + 4mm skt

B/Plug + 4mm skt

B/Plug + 10mm skt

*B/Plug + 10mm skt

B/Plug + 10mm skt

4mm socket + 10mm skt

10mm socket + 10mm skt

10mm socket + 10mm skt

10mm socket + 10mm skt

Lightweight Coiled Cord, Black

B/Plug + 4mm skt

10mm socket + 10mm skt

2

2

1

2

1

2

3

2

3

2

1

Cord

Length

(m)

2

2

2

Mftrs.

List No.

J4211YC

J4221YC

J4222YC

J4464C

J4422

Straight Cord

*B/Plug + 4mm skt

*B/Plug + 10mm skt

*B/Plug + 10mm skt

*B/Plug + 10mm skt

10mm skt + 10mm skt

10mm skt + 10mm skt

10mm skt + 10mm skt

10mm skt + 10mm skt

M5 ring tml + 10mm skt

M5 ring tml + 10mm skt

Bench Mat Ground Cord

M5 ring tml + 10mm skt

1.5

1.5

2.5

5.0

0.7

1.5

2.5

5.0

0.7

1.5

1.8

J4611

J4621

J4721

J4821

J4923

J4623

J4722

J4822

J4912

J4612

J6486

* Denotes supplied without crocodile clips

† Available until stocks are exhausted

J4111C

J4211C

J4121C

J4221C

J4321C

J4224

J4122

J4222

J4322

Order Code

438-613

438-625

438-637

438-583

178-386

438-595

178-389

264-994

179-803

438-601

179-804

265-007

179-801

518-499

178-384

178-387

595-706

178-388

179-805

179-806

595-718

179-807

595-688

254-307

877-670

1+

Price Each

10+ 50+

Bench and Floor Mat Ground Cords

997-250:

4.6m straight cord

Ì Damage resistant, moulded male stud

Ì 1 MΩ built-in

997-262:

Wristband/mat grounding system

Ì Snap-on fixing to mat

Ì Accepts up to 2 wrist straps

Ì 4.6m length, 1MΩ built-in

Ì Connects to earthing point

STA92

4.6m straight cord

Wristband/mat grounding system

Mftrs.

List No.

3040

3048

Order Code

997-250

997-262

1+

Price Each

10+

Colour

Grey

Grey

Dimensions

W D

450

600

380

450

Mftrs.

List No.

J0425

J0426

Order Code

738-669

738-670

Norastat Pads (Pack of 5)

Blue 300 400 J06485

Ì Prevents damage to bench mats and other worktops

Ì Use in areas of heavy wear, usually in front of operator

Ì 6mm static-dissipative foam or 2mm Norastat mat

Ì Solder splash resistant

Ì Easy to clean

162-840

1+

Price Each

5+ 10+

1+

Price Per Pack

5+ 10+

STA8

Pre-Cut Bench Mats, Conductive and Static Dissipative

Ì Conductive EVA: easy to clean and chemically inert

– Non-slip finish, surface resistivity

<10

5

Ω/sq

– Excellent lay flat properties

Ì Conductive Vermahide: Durable softfeel finish

– Easy to fit, self-adhesive option

– Non-slip, solder splash resistant

– Surface resistivity 10

7

Ω/sq typically

Ì Static Dissipative Rubber: 2 layer synthetic material

– Superior heat and abrasion resistance

– Static dissipative top layer, solder/flux resistant

– Conductive under layer

Ì Static Dissipative PVC: Single layer nitrile material

– Conductive mats and 484-313 have four 10mm studs

– Static dissipative mats have one 10mm stud fitted

– Additional screw-on 10mm studs are available

Note:

Connections to single layer PVC static dissipative mats be made to a single, common point.

The earth bonding point cord, order code 179-222 (see page 744) is suitable for this purpose.

STA9

1+

Price Each

5+ 10+

Type

Conductive

EVA

EVA

Vermahide

H

(mm)

1.5

1.5

1.5

W

(m)

0.6

1.2

0.7

Conductive, Self-Adhesive

Vermahide 1.5

0.5

Vermahide 1.5

0.7

D

(m)

1.2

2.4

1.0

0.7

1.0

Mftrs.

List No.

J0801

J0802

J013CF

J0123

J0122

Static Dissipative – Rubber

Blue, Norastat

Beige

2.0

1.5

0.6

0.6

Grey

Blue, Norastat

Beige, Norastat

Grey, Norastat

1.5

2.0

2.0

2.0

0.6

0.6

0.6

0.6

Static Dissipative – PVC

Blue

Tan

1.5

1.5

0.6

0.6

1.2

1.2

1.2

0.9

0.9

0.9

1.2

1.2

J062B

T2B

T2G

J063B

J063T

J063G

MAT04B

MAT04T

Screw on stud assembly

† Available until stocks are exhausted

J5261S

Order

Code

175-810

175-811

179-809

738-682

738-694

484-313

557-821

557-833

162-814

162-826

162-838

178-450

213-202

179-810

Static Dissipative Inspection Mat

H=1.5

W=203

D=305

Ì Highly reflective

Ì Ideal for inspection work and use with microscopes

Ì 3 layer rubber construction

Ì Includes a grouding kit

Ì Reversible for extra durability

Ì Superior resistance to abrasion and chemicals

Ì Heat resistant, solder and flux proof

Ì Suitable for use in clean room environments

STA113

Price Each

Mftrs. List No.

80298

Order Code

165-268

1+ 3+

Bench Mat Rolls, 3.0m and 3.3m

Ì For cutting to size

Ì Vermahide: Durable, volume conductive grey mat

– Non-slip, solder splash resistant

– Economical, ideal for shelf lining

– Surface resistance 10 7 Ω/sq approx.

Ì Norastat: 2 layer heat/wear resistant rubber mat

– Top layer is static dissipative

– Homogenous conductive under layer

– Solder, flux, oil and grease resistant

– Surface resistance 10

8

Ω/sq typically

Ì Rivet stud assembly and tool (see below) is recommended for earthing

Note:

Both these materials have the practical advantage over 3 layer (buried conductive layer) material in that more than one earthing stud may be used per mat if required, as a reliable link can be formed through contacts to an outer conductive layer.

Surface resistivity (typ.): Vermahide 10 5 Ω/square, Norastat (top layer) 10 7 Ω/square

742

Semiconductors and Passives

Prices are in Singapore Dollars and exclusive of GST

Semiconductors – Static Protection

Mftrs. List No: J0117=430-500, J0604F=265-100, J0605F=265-111, J606F=265-123

Type

Static Dissipative

Beige

Grey

Blue

H

(mm)

Conductive Vermahide

Charcoal grey 1.5

2.0

2.0

2.0

W

(m)

0.7

1.2

1.2

1.2

D

(m)

3.0

3.3

3.3

3.3

Order Code

430-500

265-100

265-111

265-123

1+

Price Each

5+ 10+

STA11

Conductive Acrylic Paint, 3.8L

Ì Tough one part floor coating

Ì Coverage: 28 to 37m 2 per 3.8L pot

Ì Excellent electrical properties

Ì Ideal in manufaturing, test, assembly and stores areas

Ì Applied with brush, roller or spray

Ì Colour: Grey

Ì Adheres to concrete, wood, plastic and metal

NB.

Min 2 coats recommened for maximum paint performance

Rivet Stud Assemblies and Tool

Surface resistivity 3.8 10 5 Ω/sq

STA112

Price Each

3.8L Pot

Order Code

165-293

1+ 3+

Pack of 10mm two-part rivet studs suitable for mounting on anti-static matting up to

5mm thickness such as the VERMAHIDE and NORASTAT matting detailed above.

The assembly tool consists of a dolly and punch for rivetting the studs in the desired location(s) on the mat. It is supplied with instructions.

Note:

Connections of elements of an ESD protected area should be made to only one common point on static dissipative mats that do not have a conductive bottom layer to provide a reliable link between studs, i.e. on 3 layer (buried conductive layer) matting.

Mftrs. List No: J5260F=522-703, J5265=265-147

STA12

Price Each

Order Multiple=5

Rivets

Order Multiple=1

Studding tool

Order Code

522-703

265-147

5+

1+

200+

10+

Floor Mats

Ì Conductive EVA: chemically resistant and non-slip.

Surface resistivity <10

5

Ω/sq.

Ì Static Dissipative Vermafelt: heavy-duty bonded fibre flooring. Surface resistivity <10 7 Ω/sq.

Ì Static Dissipative Normastat: durable, heat and wear resistant rubber. Surface resistivity <10 8 Ω/sq. approx.

Ì All mats fitted with 2 x 10mm press studs

Ì Conforms with BS EN100 015-1

Type

Conductive

EVA

EVA

Mftrs. List No.

C031D=179-811, C031B=179-812, C0504=213-445

H

(mm)

2.5

2.5

W

(m)

0.6

1.2

Static Dissipative

Vermafelt, green

Vermafelt, blue

Norastat, 2-layer, grey

5.0

5.0

2.5

1.0

1.0

1.2

† Available until stocks are exhausted

D

(m)

1.2

2.4

1.5

1.5

1.5

Order Code

175-812

175-813

179-811

179-812

213-445

1+

Price Each

5+ 10+

6

STA13

Ribbed Vinyl Floor Mat

Ì Non-slip

Ì Easy to cut

Ì Cushioned

Ì Excellent lay-flat properties

Ì Dark brown colour

Ì Includes 10mm male grounding snap

Surface resistivity 2 10

9

Ω/sq

Mftrs. List. No.

80140

H=3.1mm, W=1.2m, D=1.8m

Surface to ground resistance 7.0 10

7

Ω/sq

Order Code

165-463

1+

Price Each

3+

STA107

Table and Floor Mats

Ì 2 layer mats: Static dissipative rubber upper layer, conductive lower

– Heat/Solder splash resistant

– Excellent frictional properties

– Will not drain battery powered pcbs

Ì 3 layer mats: Soft vinyl ‘sandwich’ construction

– Durable static dissipative upper layer

– Conductive middle layer

– Dissipative, non-slip lower foam layer

– 2 female snap fasteners fitted

– Table mats include 1 wrist strap grounding system

– Floor mats include a 4.6m ground cord

Ì 3m Ground Cord: Allows interface of 722 workstation monitor and 733 splitter kit with one or more table mats

STA97

1+

Price Each

10+ 50+

W

(m)

D

(m)

Table Mats – 2 Layer

Beige 0.6

1.2

Blue

Grey

0.6

0.6

1.2

1.2

Table Mats – 3 Layers

Beige 0.6

1.2

Floor Mats – 2 Layer

Blue

Grey

0.8

0.8

11.0

11.0

Floor Mats – 3 Layers

Grey 1.2

1.8

Ground Cord, 3m

Mftrs.

List No.

8755

8760

8765

8212

8756

8761

8203

2389

Order Code

† Available until stocks are exhausted

997-006

997-018

997-020

997-031

997-079

997-080

997-110

997-122

11

Static Safe Chairs

Ì Stable 5-star base

Ì Durable woven covers

Ì Adjustable height and back

Ì Resistance-to-ground, 10 4 to 10 7 Ω

Ì High lift version available with footrest ring

Ì Seat height range: 877-694 – 460-580mm,

877-700 – 630-760mm

Standard

High lift, with footrest

Order Code

877-694

877-700

1+

Price Each

5+ 10+

STA81 continued

Internet www.farnell.com

Sales Tel (65) 788 0200 Sales Fax (65) 788 0300

743

11

Semiconductors – Static Protection

Workstation Equipment —

Continued

Earth Bonding Point Plugs

Ì Safe and convenient to use

Ì Utilises mains earth as ‘ground’

Ì 1MΩ resistor in all stud connectors, except 936-868

Ì Insulated live and neutral pins

Ì Choice of terminations

Ì Conforms to IEC 61340-5-1

Earth Bonding Point Cord for Mats and wrist straps, 2m

Ì Ideal for use with static dissipative mats

Ì 1MΩ embedded resistor

Ì 10mm press stand socket attachment

Ì 2 4mm sockets for wrist strap connection

Ì 4mm plug termination

Ì Crocodile clip and 10mm press stud adaptor supplied

Ì Conforms to EN100 015-1

STA19

Mftrs. List No.

J6459

Order Code

179-222

1+

Price Each

10+ 50+

Terminations

UK Style Plug

1 10mm stud (no int. resistor)

3 10mm studs

2 4mm studs, 1 10mm stud

2 4mm sockets, 1 10mm stud

1 2BA binding post

Mftrs.

List No.

J6301

J6303

J6306

J6330

J6321

Schuko Style Euro Plug – English Text

2 10mm studs, 1 4mm studs

3 4mm studs

J6100

J6102

3 10mm studs

2 4mm sockets, 1 10mm stud

2 2BA binding posts

J6103

J6106

J6107

Schuko Style Euro Plug – German Text

2 10mm studs, 1 4mm studs

3 4mm studs

J6100G

J6102G

3 10mm studs

2 4mm sockets, 1 10mm stud

2 2BA binding posts

J6103G

J6106G

J6107G

† Available until stocks are exhausted

Order Code

BV

936-868

254-356

254-368

254-370

595-913†

856-400

322-4739

322-4752

322-4764

322-4776

322-4727

322-4740

856-459

487-570

855-492

1+

Price Each

10+ 50+

STA16

Earth Facility Bracket

H=47, W=50, D=28

Binding Post

M5 ring Binding Post

10mm stud

Mftrs.

List No

JB596

JB315

Order Code

595-901

168-397

Ì Common grounding point

Ì M5 ring binding post, or 10mm stud earthing point

Ì 2m earth lead, M5 ring terminated

Ì Spare M5 ring terminal supplied

Ì Conforms to IEC 61340-5-1

1+

Price Each

10+ 50+

STA20

Earth Bonding Point Boxes

Ì Common grounding point

Ì 3 termination options

Ì 2m earth lead supplied

Ì M5 ring terminals

Ì 1MΩ resistor in each termination

Ì Screw mountable

Ì Conforms with IEC 61340-5-1

H=20, W=70, D=67

1+

Price Each

10+ Terminations

Mftrs.

List No.

Order Code

3 10mm stud

3 4mm Plug

2 4mm Plug

1 10mm Stud

}

JB215

JB211

JB212

596-395

596-401

596-413

† Available until stocks are exhausted

50+

STA17

Slimline Earth Bonding Point Bars

Ì Pre-mounted screws with retaining washers

Ì Fitted with 1MΩ, 1 Watt resistors

Ì Made of ABS with ultrasonically welded back cover

Ì Printed to show 3 press studs as standard

This slim Earth Bonding Point bar is designed to provide an ESD wrist strap bonding point at the workbench. It is slimmer than any EBP, and this feature allows fitting underneath bench tops with narrow edges. (Due to its narrow width it is not possible to connect banana sockets and is therefore designed for when stud connections are required.)

STA133

3 10mm studs

3 7mm studs

3 4mm studs

Mftrs.

List No.

J6603

J6604

J6605

Order Code

302-6553

302-6565

302-6577

1+

Price Each

10+ 50+

Universal Earth Bonding Point Box

Ì Accepts 4, 7 and 10mm snap fasteners, banana plugs and 3M

GSGS connectors

Ì Compatible with all European

Grounding Systems

Ì Grounds 2 wrist bands at the same time

Ì Mounts to any flat surface

STA96

Price Each

10+ 50+

Order Code

1+

996-890†

† Available until stocks are exhausted

Common Point Grounding Systems

Wrist Strap Grounding Point

Ì 2 4mm socket terminations

Ì Supplied with 3m ground cord

General Purpose Grounding Point

Ì 6 terminal strip grounding points

Ì 3 cable clips

Ì Mounts under most work stations

Wrist Strap Grounding Point

General Purpose Grounding Point

† Available until stocks are exhausted

Ì Protective cover

Ì Ground cord includes 1MΩ resistor

STA91

Mftrs.

List No.

3042

3047

Order Code

997-274†

997-298†

1+

Price Each

10+

Earth Bonding Point Bars

Ì Common grounding point

Ì Tough ABS construction

Ì Screw fixed to underside of bench tops

Ì 2m earth cord, M5 ring terminated

Ì In-line 1MΩ resistor for each termination

Ì 2 termination options

Ì Conforms to IEC 61340-5

Mftrs. List No.

J6503Y=433-147, J6505Y=433-159, J6510Y=433-160

1+

Price Each

10+ 50+ Terminations

3 10mm studs

2 4mm sockets, 1 10mm stud

Order Code

433-147

433-160

STA18

75mm Width Floor Marking Tape, 33m Roll

Ì For boundary marking

ESD protected areas

Ì Highly visible

Ì Adheres to carpets or solid floors

Ì Hard wearing

Ì Supplied on 33m rolls, 75mm width

STA21

Floor tape

Mftrs.

List No.

C3000

Order Code

681-192

1+

Price Each

10+ 50+

744

Semiconductors and Passives

Prices are in Singapore Dollars and exclusive of GST

Caution and Exit Signs

Size

Caution, Self-adhesive

50 100mm

150 300mm

Caution, Rigid Screw-on

150 300mm

300 600mm

Order Code

254-400

179-864

179-866

179-867

Exit, Self-adhesive

150 300mm

265-044

† Available until stocks are exhausted

Ì Anti-static self-adhesive or rigid conductive plastic signs

Ì 179-866 and 179-867 may be screw fixed or self adhesive pad fixed

Ì Double-sided sign may be suspended

Ì Conform to EN100 015-1

Mftrs. List No.

J 24 12=179-864, J 24 21=179-866,

J 24 23=179-867, J 24 18=254-400,

J 24 41=265-044, J 24 36=438-662

1+

Semiconductors – Static Protection

Price Each

10+ 50+

STA23

Ionisers are designed to neutralise charge in areas prone to static build up, by providing a continuous stream of balanced positive and negative ions.

The Personal Ioniser is compact, lightweight and easily portable. It has a twin speed fan, and unique alarm circuitry, indicating when the emitter electrodes require cleaning, thus maintaining optimum performance. Air filter supplied. Decay time at 2ft from ioniser front is 4 seconds.

The Bench Top Ioniser is durable and efficient and maintains an ion balance under extreme conditions in most environments. It has a powerful variable speed fan and a heater which compensates for the chill factor by raising the ambient air temperature by

10°F. The laminar air flow reduces air turbulance and ion recombination, prolongs cleanliness and increases efficiency. Decay time at 2ft from ioniser front is 2 seconds.

Both ionisers may be wall, shelf or work bench mounted. Recommended working distance from ioniser front for optimum charge neutralisation 0.15m min to 1.07m max.

STA1

1+

Price Each

3+ 10+

Mftrs.

List No.

Supplied with UK Mains Lead

Order Code

Personal

Bench top

92321

92300

438-716

438-728

Supplied with ‘Schuko’ Euro Lead

Personal 92321EU

Bench top 92300EU

322-5460

322-5458

Vectored Air Ionisation Systems

Caution Signs and Labels

L

Self Adhesive Signs

Wall Style

Rigid Wall Sign

152.5

305

H

Mftrs.

List No.

Order

Code

305

604

7413

7414

997-316

997-328

1+

Price Each

10+ 50+

STA89

Hand-Held Ioniser

Ionisation Equipment

Ì Neutralises positive and negative charges

Ì Convenient, pistol grip action

Ì 400mm range

Ì Reliable, piezo-electric operation

Ì Requires no power supply, batteries or recharges

Ì 50,000 trigger operations min.

Ì Unique ‘ion indicator’ test device included

Ì Ideal for field-service, prototyping and production use

STA85

Price Each

Order Code

936-856

1+ 5+

Work Station Ionisers

Hand-Gun System

Ion Vector System

Photoelectric Switch

The Ion Vector and Neutalising Hand Gun systems are complete ionisation systems designed to deliver a controlled combination of compressed, ion balanced air, to eliminate static charge, whilst removing dust and other contaminants attracted by the static.

The Ion Vector System is fixed mounted. Ionised air is delivered via a flexible 1.5m

hose, goose-neck nozzle, and stand. It is controlled by either a footswitch (supplied), or optional photo-electric switch for automatic operation on a conveyor belt system.

The Hand Gun System is a flexible, hand-held unit. Ionised air is delivered via a 2.1m

hose and hand gun nozzle, with thumb operated switch.

Each system comprises a control base unit, air hose, and appropriate nozzle. Base units have quick-connect air line fittings, needle valve air flow adjustment, ion balance ajustment, and replaceable air filter. For operation, a clean, dry air supply is required, and IEC mains cord suggested order codes 152-575 (UK) or 210-699 (European

‘Schuko’) style

.

Input Voltage

Power consumption

220 V ac, 50Hz

2.5W/25W

Air Consumption

Recommended PSI

3.5 CFM 30 PSI

5-100 PSI

STA111

1+

Price Each

3+

Ion Vector System

(inc. footswitch)

Hand Gun System

Photoelectric Switch

Mftrs.

List No.

92100

92105

92117

Replacements

1.5mm Vector Nozzle

2.1m Hand Gun Nozzle

Footswitch

Air Filters (pack of 2)

92115

92118

92116

92119

† Available until stocks are exhausted

Order Code

165-396

165-402

165-414

165-426

165-438

165-440

165-451

11

Overhead Ioniser

H=70, W=600, D=130

Ì Autobalancing with audio/visual alarms

Ì High air output 4.25-7.35m

3

/min

Ì Continuous monitoring for optional performances

Ì 2 120mm fans

Ì Compact size

POWER CORD REQUIRED, SEE ORDER CODES 439-307 OR 210-699 (EURO-

PEAN ‘SCHUKO’) STYLE

STA110

Price Each

Mftrs. List No.

92235

Order Code

165-475

1+ 3+

Personal H=171, W=152, D=63.5

Bench top H=178, W=279, D=229

Internet www.farnell.com

Sales Tel (65) 788 0200 Sales Fax (65) 788 0300

745

Semiconductors – Static Protection

Workstation Kits

Field Service Engineer’s Kits

Handy, portable static-safe workstation kits. Contents include lightweight fold-up vinyl mat, wristband and coiled cord, and straight ground cord with crocodile clip termination. Mats include 2 pockets for pcb’s, components or tools.

Two-layer

kit features a blue static dissipative layer (<10

11

/sq), a conductive layer (<10Ω

5

/sq), two 1MΩ resistors in the coiled cord, and one in the straight cord.

and a 1MΩ resistor in each cord.

Both kits conform to EN100 015-01.

Static dissipative

kit features a single layer

(<10 9 Ω/sq), with reinforced corners and edging,

STA33

Type

Two-layer

Static dissipative

Mftrs.

List No.

J7124

J7215

Order Code

233-018

877-682

1+

Price Each

10+ 25+

Pocket-Size Field Service Kit

Mftrs.

List No.

KIT0001

Order Code

178-422

1+

Price Each

10+ 25+

Static Dissipative Workstation Kit

Ì Attractive, light blue

Norastat work surface, 1.2 0.6m R

G

10 6 t o 5 1 0 7 Ω

Ì Adjustable wristband set

Ì EPA warning sign, self-adhesive

300 150mm

Ì EBP plug to fit UK socket

Ì Straight ground cord 1.5m

Ì Fitted with UK mains plug

Creates a single operator ESD protected workstation. The kit includes a solder resistant dissipative table mat and all the necessary grounding equipment for the operator and mat. The mat is more durable than a conductive mat and can be used where live equipment is being tested. A dissipative mat also offers a higher level of protection than a conductive mat (charge relaxation vs electrostatic discharge).

STA136

Mftrs. List No.

J753

Order Code

302-6620

1+

Price Each

10+ 25+

11

Ì Kit contents:

Static dissipative mat with pocket

Adustable wrist band

Wrist strap cord (1.5m)

Extension cord (1.5m)

Work surface cord (1.5m)

Crocodile clip

Ì Small enough to fit a shirt pocket

Ì Lightweight

Ì Replacement work surface cord available

STA93

Static Dissipative Work Station Kit

This kit provides the essential items required for use in test, inspection or production areas where live equipment could be worked on within an

ESD protected area, and conforms to

EN100 015-1.

The kit comprises a grey Norastat 2 layer static dissipative bench mat measuring

1 2 0 0 m m 6 0 0 m m , a n e l a s t i c a t e d adjustable wristband (518-438) and coiled ground cord (as 178-389), a common point straight ground cord (similar to 179-

222), an earth plug with 3 10mm studs

(254-356), caution sign, (179-864) and instructions for use.

Fitted with UK mains plug.

STA35

Mftrs. List No.

J7558F

Order Code

484-325

1+

Price Each

10+ 25+

Field service kit

Replacement work surface cord

† Available until stocks are exhausted

Mftrs.

List No.

8505

3063

Order Code

997-249

997-286

1+

Price Each

10+

Conductive EPA Kit

Ì Low cost

Ì Vermahide bench mat,

1.0 0.7m, R

G

=10 4 to 10

Ì Adjustable wristband set

6 Ω

Ì EPA warning sign, self-adhesive

300 150mm

Ì EBP plug to fit UK socket

Ì Straight ground cord 1.5m

Ì Fitted with UK mains plug

Creates a single operator ESD protected workstation. The kit includes a conductive self-adhesive table mat and all the necessary grounding equipment for the operator and mat. Not to be used where live equipment is being tested.

STA137

Mftrs. List No.

J733

Order Code

302-6619

1+

Price Each

10+ 25+

Conductive Work Station Kit

746

TBA

Ì Prevents static damaging sensitive electronic components

Ì Kit contains:

Conductive floor and bench mats

(1219 610mm)

Adjustable elasticated wrist strap

Coiled ground cord, 2.2MΩ terminated,

(2m)

2 straight ground cords, 1.1MΩ terminated, (1.2m)

Earth reference plate

Ì Conforms to EN100 015-1

STA34

Semiconductors and Passives

Monitored Workstation Kit with Wrist Strap Tester

Ì Attractive, light blue

Norastat work surface, 0.9 0.6m

R

G

10 6 t o 5 1 0 7 Ω

Ì Adjustable wristband set

Ì EPA warning sign, self-adhesive

300 150mm

Ì Straight ground cord 1.5m

Ì EBP block with 2 10mm studs and built in wrist strap tester

Ì Fitted with UK mains power supply

Creates a single operator ESD protected workstation. The kit includes a solder resistant dissipative table mat and all the necessary grounding equipment for the operator and mat. The mat is more durable than a conductive mat and can be used where live equipment is being tested. The ground point includes a built-in wrist strap tester.

STA135

Mftrs. List No.

J753M

Order Code

302-6632

1+

Price Each

5+ 10+

Prices are in Singapore Dollars and exclusive of GST

Semiconductors – Static Protection

Conductive Plastic Tweezers

Workstation Kit with Floor Mat and Wriststrap Tester

With Footstraps

Ì Attractive, light blue Norastat work surface, 0.9 0.6m R

G

10 6 t o 5 1 0

Norastat floor mat 0.6 0.9m

7 Ω and

Ì Adjustable wristband set and heel grounder pair

Ì EPA warning sign, self-adhesive

300 150mm

Ì Two straight ground cords 1.5m

Ì EBP block with 2 10mm studs and built in wrist strap tester

Ì Fitted with UK mains power supply

Creates a single operator ESD protected workstation. The kit includes a solder resistant dissipative table mat and all the necessary grounding equipment for the operator and mat. A pair of heel grounders allows the operator to disconnect the wrist strap still ensuring path to ground continuity. The ground point includes a built-in wrist strap tester.

STA134

Mftrs. List No.

J753MC

Order Code

302-6644

1+

Price Each

5+ 10+

Overall length 127mm

TBA

Tweezers manufactured in carbon loaded, volume conductive polypropylene. The surface resistivity of the tweezers is in the order of 5kΩ/square. They are ideal for loading static sensitive components and have serrated jaws to aid gripping. Conforms to

EN100 015-1

.

STA32

Mftrs. List No.

TWEE0002

Order Code

175-876

1+

Price Each

10+ 25+

Conductive PCB Racks

Ì Conductive polypropylene

Ì Holds up to 25 circuit boards

Ì Conforms to EN100 015-1

175-835

175-836

H

125

125

W

265

265

D

350

200

Production/Handling Equipment

Static Dissipative Finger Cots

Ì Provide excellent ESD protection

Ì Retains tactile sensitivity

Ì Powder free latex rubber construction

Surface resistivity 10 6

Tribogeneration

– 10

<100V

9 Ω/sq

Rack

Depth

350mm

200mm

Order Code

175-835

175-836

1+

Mftrs. List No.

K 18 24=175-835, K 18 22=175-836

10+

Price Each

50+ 100+

STA26

SMD Reel Rack

Ì Conductive polypropylene

Ì Holds up to 19 reels

Ì Accepts 7" or 13" reels

Ì 15mm slot widths

Ì Conforms to EN100 015-1

STA106

20 Pieces Per Pack

Mftrs. List No.

Order Code

Small

Medium

Large

72700

72705

72710

165-177

165-207

165-220

† Available until stocks are exhausted

1+

Price Per Pack

50+

Anti-Static Vinyl Gloves

Small

Medium

Large

Mftrs.

List No.

72500

72505

72510

Order Code

165-049

165-062

165-086

† Available until stocks are exhausted

Ì Prevents static charge generation

Ì Protects hands

Ì Strong light weight construction

Ì Disposable

Size

Small

Medium

Large

Cuff

Opening

110

110

120

Surface resistivity

Tribogeneration

Length

240

240

240

2 1 0 10

<200V

Ω/sq

Palm Width

90

100

110

1+

Price Per Pair

50+

STA109

Conductive Gloves

Ì 2 sizes

Ì Protects hands and components

Ì Comfortable, elasticated cotton with interwoven conductive strands

Ì Surface resistivity <10 6 ohms/sq

Mftrs. List No.

K240

Order Code

595-720

H=75, W=345, D=230

1+

Price Each

10+ 50+

Large Capacity PCB Rack

Ì 48 board capacity

Ì Groove width/pitch 4mm

Ì Durable conductive polypropylene

Ì Free standing or louvre panel mounting

Ì Conforms to EN100 015-1

STA27

Order Code

936-832

1+

H=145, W=388, D=286

Price Each

10+ 25+

STA86 continued

11

Size

Small

Medium/Large

Mftrs.

List No.

J3355S

J3355M

Order Code

168-312

168-324

Internet www.farnell.com

1+

Price Per Pair

10+ 50+

STA30

Sales Tel (65) 788 0200 Sales Fax (65) 788 0300

747

11

Semiconductors – Static Protection

Production/Handling Equipment —

Continued

PCB Rack

H=315

W=320 (standard)

D=200 (inc. handles)

Rack module

Additional rails (1 pair)

The antistatic printed circuit rack moulded in carbon loaded polypropylene is designed for safely holding PC boards during all stages of assembly, cleaning and testing. The modules may be combined to give any size, height, width or depth and will accomodate any width of PCB from 15 to

290mm. This may be increased to a maximum of

970mm if the extruded rails are replaced with the

147-395 1 metre rails. Two front handles are used to hold the assembly. Supplied complete with two wall mounting hooks, four back strips to prevent the PCB’s from sliding out and two 320mm aluminium extrusion rails with nuts and bolts. May be used for transporting PCBs, in plating, etching and washing applications (subject to acceptance of aluminium and steel nuts and bolts in the solutions).

STA139

1+

Price Each

5+ 10+

Order Code

.

147-394

147-395

Conductive Shorting Connector

Supplied in 0.5 metre lengths, the shorting connector may be cut down to fit edge connectors and provides mechanical and electrostatic protection. Conforms to EN100 015-1.

Mftrs. List No.

K 15 04

‘D’ Connector Covers

Order Code

175-831

1+

Price Each

25+

Ì Prevents static, physical and chemical damage

Ì Conductive polyethylene construction

Ì For cable assemblies, computers, peripherals, etc.

Ì Plug and socket options

STA59

STA60

Conductive Component Tray TBA

1+

Price Each

20+ 100+ 500+

Mftrs. List No.

TRAY0010

Order Code

175-874

1+

Ì Conductive polypropylene

Ì 10mm mate press stud fitted

Ì Surface resistivity 10

6

Ω/sq. max

Ì Conforms to EN100 015-1

H=19, W=178, L=305

Price Each

10+ 25+

STA28

No.

of Pins

Plug Covers

9

15

25

Mftrs.

List No

4272-9P

4272-15P

4272-25P

Order Code

596-061

596-073

596-085

Socket Covers

9

15

25

50

4272-9S

4272-15S

4272-25S

4272-50S

596-115

596-127

596-139

596-152

† Available until stocks are exhausted

Conductive Trays

PCB and Component

Overall dimensions: H=51, W=280, L=460

Stackable trays manufactured from conductive polypropylene with surface resistivity of 1MΩ/square or less. Available as an open tray for PCBs or divided into 16 compartments for components. Conforms to EN100 015-1.

Mftrs. List No. K1617=265-056, K1619=265-068

STA29

1+

Price Each

10+ 25+

PCB

Component

Order Code

265-056

265-068

Static Dissipative Tool Roll

Ì Made of 3-layer, hard wearing coated fabric

Ì 10 pockets

Ì Outer layers are static dissipative, inner is conductive

Ì Colour: blue

Ì Size 310 510mm when open

Ì R

S

: 10 6 to 10

Ì Weight: 135g

9 Ω

Ì Hook and loop closure

N.B. Tools not included

Tools can be safely transported to, and used within, an EPA when stored in a lightweight ESD tool roll. Suitable for both in-house and field engineer use.

STA127

Mftrs. List No.

J7100

Order Code

302-6735

1+

Price Each

10+ 25+

Cleaning Products

Anti-Static Cleaning Wipes

Ì Heavy duty cellulose fibre tissues

Ì Saturated in anti-static alcohol based cleaning solution

Ì Convenient, re-closable pop-up dispenser

Ì Cleans surfaces and eliminates static

Ì Ideal for computer screens, mats, work surfaces, keyboards, office and manufacturing environments

Ì Removes dust grease, grime, fingerprints and solder flux

Conductive Brushes

Soft Brushes

100mm width

Hard Brushes

12mm width

25mm width

35 75mm block

Mftrs.

List No.

K3050

Ì Durable

Ì Soft brushes suited to cleaning delicate items

Ì Hard brushes suited for scrubbing

PCBs assemblies

Ì Conductive polypropylene handles

Ì Copper-sulphide infused acrylic bristles

NB.

For effective operation, user should be earthed

STA25

Order Code

265-081

1+

Price Each

10+ 25+

K3003

K3005

K3040

265-070

518-475

168-660

Box of 160 wipes

Tissue: H=146, W=172, Box: L=178, Dia=102

Order Code

165-244

1+

Price Per Box

10+

STA108

748

Semiconductors and Passives

Prices are in Singapore Dollars and exclusive of GST

Anti-Static ClothsTECHNOTREND

Ì Reduces dust attraction

Ì Anti-static chemical impregnated

Ì Re-activated with water

Ì 10m 2 coverage per cloth per application

Ì Unique green stripes indicate when cloth requires re-activating

Ì Supplied in boxes of 50

H=300, W=300

STA76

Order Multiple=50

Order Code

522-715

50+

Price Each

500+ 2500+

Benchtop Cleaner

Semiconductors – Static Protection

An anti-static non-abrasive liquid cleaner suitable for use in ESD protected areas on mats, table tops etc. Apply with clean lint-free rag or standard paper towel. Safe on any surface. Removes flux residues, finger marks, dirt and grease. The spray top on the 0.5l bottle will also fit the 1.0l bottle if required.

Static Dissipative Floor Cleaner

Ì Low VOC

Ì Low Foam, Zinc free

Ì Neutral pH – needs no rinsing, non-alkaline

Ì Static dissipative 10 7 to 10 9 Ω

Ì Zero tribo-generation

Ì Non streaking

Ì 10:1 concentrate

Ì Dries in 1 hour

Ì High traffic areas – apply once a week

Ì Light traffic areas – apply 2-3 times a month

A static dissipative, low VOC, floor cleaner to be used in conjunction with Vermasol floor polish

Order Code 302-6656. Designed to remove dirt and scuff marks from a floor treated with

Vermasol polish. Supplied as a 10:1 concentrate this product is also clean room compatible.

STA131

Mftrs. List No.

C903

Order Code

302-6668

1+

Price Each

10+ 25+

Bottle with spray top, 500ml

Refill bottle, 1 litre

Mftrs. List No.

J1605F=265-159, J1610F=265-160

1+

Price Each

12+ 36+

STA24

Order Code

265-159

265-160

Static Control Spray

Ì Extra strength

Ì Removes dirt/stains with ease

Ì Ideal for workstations, computer screens, floor mats

Ì Clear, odourless, water-based liquid

Ì Leaves no residue

Ì Large 32oz (950ml) trigger spray bottles

Office Supplies

Static Dissipative Document Wallets and Folders

Size

Document Wallets

A4 (100 per pack)

Document Folder

A4 (100 per pack)

Mftrs.

List No.

K5202

Ì Will not generate static charge

Ì Durable, anti-static LDPE construction

Ì Non-stick – ideal for photocopying

Ì A4 and A3 sizes

Ì Printed with ESD logo

Ì Universal fit, 11 hole spine (wallets only)

Ì Folders open on two sides

Ì R

S

<10 11 Ω, T

1000

<2s

Ì Conform with IEC 61340-5-1

STA115

Order Code

168-610

1+

Price Per Pack

5+ 10+

K5221

168-713

Spray bottle, 950ml

Box of 12 bottles

Mftrs.

List No.

8001

8001-12

Order Code

997-146

997-158

1+

Price Each

10+ 50+

STA103

Static Dissipative Ring Binders

Size

A4 2 ring 50mm

A4 4 ring 25mm

A4 4 ring 50mm

Mftrs.

List No.

K5105

K5102

K5104

Ì For use within ESD protected areas

Ì Will not generate static charge

Ì 0.35mm thick, antistatic PVC covering

Ì A3 and A4 sizes, 2 or 4 ring

Ì ESD logos on front and spine

Ì Transparent label window on spine

Ì R

S

<10”Ω, T

1000

<2s

Ì Conform with EN100 015-1

STA118

1+

Price Each

10+ 25+

Order Code

168-567

168-543

168-555

11

Static Dissipative Floor Polish

Ì Non-hazardous water based

Ì Easy to apply, low VOC (volatile organic compounds)

Ì Zero tribo-generation

Ì Yields approximately 50m 2 per litre

Ì Durable non-slip

Ì To be used in conjunction with ESD footwear

Ì Long lasting, low maintenance

Ì R

S

10 7 to 10 9 Ω

Ì Use in conjunction with C903 cleaner, Order Code

302-6668

Static dissipative floor polish can enhance the features of an existing ESD floor or make a non-ESD floor static dissipative, without the cost of replacing the entire floor.

It is a free flowing liquid emulsion which can be easily applied to any hard surfaces or sealed floors i.e. vinyl, concrete, linoleum or ceramic tiles. Complies with BS EN 100

015/1

and BS IEC 61340-5-1.

STA129

Mftrs. List No.

C901

Order Code

302-6656

1+

Price Each

10+ 25+

Static Dissipative Clip Boards

Ì Will not generate static charge

Ì 0.35mm thick, antistatic PVC covering

Ì Robust, sprung metal clip

Ì Printed with ESD logo

Ì Optional cover

Ì R

S

<10”Ω, T

1000

<2s

Ì Conform with EN100 015-1

Clipboard

Mftrs.

List No.

K5301

Order Code

168-634

1+

Price Per Pack

10+ 25+

STA119 continued

Internet www.farnell.com

Sales Tel (65) 788 0200 Sales Fax (65) 788 0300

749

11

Semiconductors – Static Protection

Packaging Materials

Conductive Bags

Ì 75 micron ‘Vermasafe’ polyethylene

Ì High puncture resistance

Ì Excellent heat sealability

Ì Surface resistivity <10 5 Ω/sq.

Ì Fully recyclable

Ì Conforms with IEC 61349-5-1

Note:

Print on bag may differ from illustration

Pack Quantity=100

Dimensions (W H) mm inches

3 5

5 8

8 1 0

1 0 1 2

1 2 1 6

1 5 1 8

7 5 1 2 5

1 2 5 2 0 0

2 0 0 2 5 0

2 5 0 3 0 0

3 0 0 4 0 0

3 8 0 4 5 0

Order Code

996-750

996-762

996-774

996-786

996-798

996-804

† Available until stocks are exhausted

Mftrs. List No. BP3/Dimensions W H

Order Multiple=100

Dimensions (W H) mm inches

7 5 1 0 0

1 0 0 1 0 0

1 0 0 1 5 0

1 0 0 3 0 0

1 5 0 2 0 0

1 5 0 2 5 0

2 0 0 2 5 0

1 5 0 6 0 0

2 0 0 3 0 0

2 5 0 3 5 0

3 0 0 4 0 0

4 0 0 4 5 0

4 5 0 5 0 0

3 4

4 4

4 6

4 1 2

6 8

6 1 0

8 1 0

6 2 4

8 1 2

1 0 1 4

1 2 1 6

1 6 1 8

1 8 2 0

Order Code

522-727

522-739

522-740

522-752

522-764

522-776

.

522-788

522-790

522-806

522-818

522-820

522-831

522-843

100+

Price Each

1K+ 5K+

Static Dissipative Transparent Bags

Anti-Static Pink Bags:

Ì Suitable for use in EPA to hold non-ESD sensitive items

Ì Made of polyethylene 0.075mm thick

Ì Amine free

Ì Tough, puncture resistant

Ì R

S

: <10 11 , T

1000

<2 sec. at 50% rH

Ì Heat sealable, recyclable

Ì Bags printed with ESD logo and text to

IEC 61340-5-1

Clear Static Zip Bags:

Ì Suitable for packing electronic components not requiring EDS shielding

Ì Made of permanently anti-static fully transparent 0.075mm thick film

Ì Non-contaminating

Ì Tough, puncture resistant

Ì R

S

: <10

11

, T

1000

<2 sec. at 50% rH

Mftrs. List No.

BQ3/Dimensions W H

STA38

Order Multiple=100

Dimensions (W H) mm inches

Anti-Static Pink Bags

1 0 0 1 5 0

1 5 0 2 0 0

2 0 0 2 5 0

4 6

6 8

8 1 0

Order Code

522-855

522-867

522-879

Order Multiple=10

2 5 0 3 5 0

4 0 0 4 5 0

1 0 1 4

1 6 1 8

179-785

179-786

Clear Static Dissipative Zip Bags

7 6 1 2 7 3 5

877-712

1 5 2 2 0 3

2 0 3 2 5 4

2 5 4 3 0 5

4 0 6 3 0 5

6 8

8 1 0

1 0 1 2

1 6 1 2

178-427

178-428

178-429

179-220

100+

10+

Price Each

1K+

100+

10K+

1K+

Static Dissipative Transparent Bags

Ì Will not generate static charge

Ì Suitable for use in an EPA

Ì Ideal for documents and non-sensitive devices

Ì Distinctive colour

Mftrs. List No. 1620 (H W) (ins.)

10K+

STA36

STA101

Transparent Recloseable Bag

Transparent polythene bags treated for anti-static, giving a pink tint. The bag has a recloseable top and white panels suitable for writing. Surface resistivity <10 13 Ω/sq.

Dimensions (typ.)

Thickness

Surface resistivity

85 120mm

200 gauge (50µm)

10 9 to 10 13 ohms/square

STA39

Order Multiple=100

Order Code

522-880

100+

Price Each

1K+ 10K+

Self-Seal Bubble Bags

Static Dissipative

1+

Price Per Pack

10+ 50+

Ì Self-sealing adhesive closure

Ì Transparent for easy product indentification

Ì Will not discharge batteries

Ì Surface resistivity <10

13

Ω/sq.

Ì Charge decay <2s for 5kV charge

Mftrs. List No.

ASBB1=595-974, ASBB5=596-012, ASBB2=595-986,

ASBB6=596-024, ASBB3=595-998, ASBB7=596-036,

ASBB4=596-000,

STA41

Order Multiple=10

Dimensions (W H) mm Inches

1 0 0 1 3 5

1 3 0 1 8 5

1 8 0 2 3 5

2 3 0 2 8 5

2 8 0 3 6 0

3 0 5 4 3 5

3 8 0 4 3 5

4 5 È

5 7 È

7 9 È

9 1 1 È

1 1 1 4

1 2 1 7

1 5 1 7

Order Code

595-974

595-986

595-998

596-000

596-012

596-024

596-036

10+

Price Each

100+ 1K+ 10K+

Metallised Bubble Shielding Bags

Ì Combines ‘Faraday

Cage’ and mechanical protection

Ì Inner layer is amine-free anti-static film

Ì Middle layer is anti-static bubble,

Ø8mm, H=5mm

Ì Outer layer is buried-metal shielding film

Ì Not labelled or printed

Ì Re-useable

Shielding bubble bags are made of standard metallised film used on shielding bags laminated to a pink anti-static bubble bag. This type of packaging offers good mechanical protection too. It is partially transparent allowing inspection of contents.

STA132

Pack Quantity=10

Outer Dimensions

1 5 0 2 5 0

2 5 0 3 0 0

3 5 0 4 5 0

Mftrs.

List No.

BA9GK

BA9KL

BA9MP

Order Code

302-6589

302-6590

302-6607

1+

Price Per Pack

10+ 50+

Testable Transparent Shielding Bags

With and Without Recloseable Top

Ì Re-useable

Ì Metallic outer layer provides ‘Faraday cage’ protection

Ì Conductive, anti-abrasive coating

Ì Recommended for regular testing

Ì Strong polyester middle layer

Ì Static dissipative polyethylene inter layer

Ì Meets EN100 015-1, EIA-541 and MIL-M-

38510

Ì Surface resistivity 10

7 to 10

8

Ω/sq.

Ì Inner surface resistivity <10

12

Ω/sq.

750

Semiconductors and Passives

Prices are in Singapore Dollars and exclusive of GST

Semiconductors – Static Protection

Mftrs. List No. Standard: CP303/Dimensions W H (ins),

Recloseable Top: CP304/Dimensions W H (ins)

Order Multiple=10

Dimensions (W H) mm inches

Standard

7 5 1 2 5

1 0 0 1 5 0

1 2 5 2 0 0

1 5 0 2 5 0

2 0 0 2 5 0

2 5 0 3 0 0

3 0 0 4 0 0

3 8 0 4 5 0

3 5

4 6

5 8

6 1 0

8 1 0

1 0 1 2

1 2 1 6

1 5 1 8

Order Code

.

175-879

.

179-206

.

175-880

.

179-207

.

175-881

.

175-882

179-209

179-210

With Recloseable Top

7 5 1 2 5 3 5

1 2 5 2 0 0 5 8

2 0 0 2 5 0

2 5 0 3 0 0

3 0 0 4 0 0

3 8 0 4 5 0

8 1 0

1 0 1 2

1 2 1 6

1 5 1 8

.

254-230

254-241

.

254-253

.

254-265

.

254-277

254-289

† Available until stocks are exhausted

10+

Price Each

100+ 1K+

STA43

100 Per Pack

Dimensions (W H) mm inches

Standard

7 0 1 2 0

1 0 0 1 5 0

1 2 0 2 0 0

1 5 0 2 5 0

2 0 0 2 5 0

2 5 0 3 0 0

3 0 0 4 0 0

3 8 0 4 5 0

3 5

4 6

5 8

6 1 0

8 1 0

1 0 1 2

1 2 1 6

1 5 1 8

Recloseable Top

7 0 1 2 0

1 0 0 1 5 0

1 2 0 2 0 0

1 5 0 2 5 0

2 0 0 2 5 0

2 5 0 3 0 0

3 0 0 4 0 0

3 8 0 4 5 0

3 5

4 6

5 8

6 1 0

8 1 0

1 0 1 2

1 2 1 6

1 5 1 8

Order Code

681-222

681-234

681-246

681-258

681-260

681-271

681-283

681-295

681-301

681-313

681-325

681-337

681-349

681-350

681-362

681-374

1+

1+

Price Per Pack

10+ 25+ 50+

5+ 10+ 25+

Moisture Vapour Barrier Bags

Reusable Transparent Shielding Bags

Ì Metallised outer coating

Ì Durable construction, scratch resistant

Ì Testable

Ì Superior charge dissipation properties

Ì Surface resistivity <10 Ω/sq

Ì Recloseable option

Ì Tested to ASTMD2103

Ì Meets EIA-541 standard

Mftrs. List No.

Standard: 2100R (W H) (ins.)

Recloseable: 2100R (W H) (ins.)

STA102

Pack Quantity=100

Dimensions (W H) mm inches

Standard, 2100R Series

8 1 0

1 0 1 2

1 2 1 6

2 0 0 2 5 0

2 5 0 3 0 0

3 0 0 4 0 0

Order Code

996-658†

996-660†

996-671†

Recloseable, 2110R Series

4 6 1 0 0 1 5 0

996-683†

8 1 0

1 0 1 2

2 0 0 2 5 0

2 5 0 3 0 0

996-695†

996-701†

† Available until stocks are exhausted

1+ 5+

Price Per Pack

10+ 25+ 50+

50+

Ì Outer layer: static dissipative barrier

Ì Middle layer: Aluminium foil

Ì Inner layer: static dissipative polyethylene

Ì R

S

: <10

11

Ì MVTR: 0.008g/sqm/24hrs

Ì Static decay: <0.1sec (5000-50Volts)

Static dissipative, high barrier bags suitable for vacuum packaging and/or nitrogen flushing. Meet the requirement of MIL B81750C and EIA 583. Offers ESD and EMI/RFI shielding.

STA130

Pack Quantity=100

Dimensions Mftrs. List No.

1 0 0 6 5 0

1 5 0 6 5 0

2 5 0 6 5 0

BW9ET

BW9GT

BW9KT

Order Code

302-6670

302-6681

302-6693

1+

Price Per Pack

10+ 25+

11

Metalised Shielding Bags

Ì Faraday cage protection against ESD

Ì Buried aluminium layer

Ì Excellent see-through properties

Ì Polycarbonate compatible

Ì R

S

=10

9

– 5 1 0

11

Ω inside and out

Ì T

1000

@ 12% rH <2s

Ì Conform with EN100 015-1

Dessicant Sachets and Humidity Indicator Cards

STA114

100 Per Pack

Dimensions (W H) mm inches

7 0 1 2 0

1 0 0 1 5 0

1 5 0 2 5 0

3 5

4 6

6 1 0

10 Per Pack

2 0 0 2 5 0

2 5 0 3 0 0

3 0 0 4 0 0

4 0 0 4 5 0

8 1 0

1 0 1 2

1 2 1 6

1 6 1 8

Mftrs.

List No.

BB4DF

BB4EG

BB4GK

Order Code

168-464

168-476

168-488

BB4JK

BB4KL

BB4LN

BB4NP

168-490

168-506

168-518

168-520

Metalised Shielding Bags

Internet www.farnell.com

1+

1+

Price Per Pack

5+ 10+

10+ 50+

25+

100+

Ì Low cost

Ì Buried metalised layer

Ì Static dissipative outer and inner layers

Ì Non-testable

Ì Inner/outer surface resistivity <10 11 Ω/sq

Ì Recommended for single use applications

Ì Optional dual-track recloseable top

Ì Meets EIA-541

Mftrs. List No. Standard: 1900 (W H) (ins),

Recloseable: 1910 (W H) (ins)

STA44

Dessicant Sachets

Ì Non-indicating fabric

Ì Paper, heat sealed

Ì Printed ‘Silica gel – do not eat’

Ì Meets BS 2540:1991

For use in conjunction with moisture barrier bags whenever moisture control is a critical factor in the packaging of electrostatic sensitive devices.

Humidity Indicator Cards

Ì Meets EIA 583 Ì Packed in tins

A low cost method of indicating humidity conditions within moisture barrier bags when used to ship electrostatic sensitive devices.

STA128

Desiccant Sachets

(pack of 100)

10gm

25gm

Humidity Indicator Card

(pack of 200)

Mftrs.

List No.

BW902

BW901

BW900

Order Code

302-6700

302-6711

302-6723

1+

Price Per Pack

5+ 10+

Sales Tel (65) 788 0200 Sales Fax (65) 788 0300 continued

751

Semiconductors – Static Protection

Packaging Materials —

Continued

Conductive Foam Matting

Ì Low density

– for cushioning purposes

– 6mm thickness

Ì High density

– will retain IC component leads

– 6mm thickness

– 228 127 size fits conductive storage boxes 175-837/838

Ì Closed cell

– 7mm thick ‘Vermafoam XL’ – for maximum protection performance

– Non-contaminating

Volume resistance <10 4 Ω Surface resistivity < 5 1 0 4 Ω/sq

Mftrs. List No.

L210633=175-849, L250622=175-847, L250633=175-848, L 26 33=179-789

STA45

Size

Low density

3 0 5 3 0 5

High density

2 2 8 1 2 7

3 0 5 3 0 5

Closed cell

3 0 5 3 0 5

Order Code

.

.

175-849

175-847

175-848

179-789

1+

Price Each

25+ 100+ 250+

Component Boxes

Internal Dimensions

H W D

25

38

20

60

100

135

60

100

50

IC Tubes

Internal Dimensions

H W D

195

250

250

280

300

300

475

115

155

195

135

250

250

275

30

30

30

45

30

65

45

Transit Boxes

Order Code

175-843

179-792

175-844

430-444

175-845

430-456

430-468

1+

Mftrs.

List No

CB-1B

CB-2B

CB-3B

Order Code

596-206

596-218

596-220

Price Each

10+ 100+

STA54

Ì Strong yet light weight

Ì Surface resistivity <10 5 Ω/sq

Ì Conductive coated, ‘E’ Flute cardboard

Ì Pink anti-static foam lined

Ì Ideal for small components

Ì Conforms to EN100 015-1

1+

Price Each

10+ 100+

STA52

Ì Larger versions of

‘Component Boxes’ (above)

Ì Conductive coated ‘B’ flute cardboard

Ì Suitable for larger components, pcbs and assemblies

Ì Printed with static warning sign

Ì Conforms to EN100 015-1

11

Five popular lengths (3, 5, 7, 11 and 20 inch) of pre-holed (unless otherwise stated), anti-static IC tubes in 300 mil and 600 mil configurations allowing for convenient IC storage. Each tube has a selection of holes and the chips are secured by the use of a

”thum tak“ (for tubes with no holes an end bung is available).

A simple but effective “nail-saver” tool is also available for easy removal/re-insertion of the ”thum tak“ eliminating sore hands and broken fingernails.

STA141

5+

Price Each

50+ 100+ 500+

0.3" (7.62mm)

IC tubes

DIL (no holes) .............

DIL...............................

DIL...............................

DIL...............................

DIL...............................

SOIC (no holes) ...........

Lgth.

0.6" (15.24mm) IC Tubes

DIL...............................

DIL...............................

DIL...............................

DIL...............................

125

175

280

510

75

125

175

280

510

510

Miscellaneous

TO-220 (no holes) .......

End Bung

·3" DIL/PLCC 28/32......

·3" SOIC .......................

TO-220 ........................

“Thum Tak”/Pin ...........

510

Order

Multiple

5

5

5

5

5

5

5

5

5

5

5

25

25

25

25

Order

Code

482-985

445-939

459-914

459-926

485-226

638-808

445-940

459-938

459-940

485-238

638-821

482-997

638-833

638-845

459-951

“Nail-Saver” pin remover/inserter..........

1

459-963

25+

1+

50+

10+

100+

25+

Conductive Printed Circuit Board Cartons

Cardboard sleeve and slider cartons lined with 6mm thick low density conductive foam conforming to EN100

015-1

. A carton provides excellent protection for transporting PCB’s. Range includes sizes for single, double and extended double Eurocards.

Mftrs. List No.

L 31 19=175-843, L 31 25=175-844, L 31 30=175-845,

L 31 22=179-792, L 31 28=430-444, L 31 31=430-456,

L 31 41=430-468

752

Semiconductors and Passives

38

38

64

64

64

64

Internal Dimensions

H W D

178

229

229

267

318

394

127

191

191

216

267

318

Mftrs.

List No.

3080-1B

3180-3B

3190-4B

3230-6B

3320-8B

3500-10B

Order Code

.

596-231

.

596-243

596-255

.

596-267

596-279

.

596-280

1+

1+

64 521 394 3610-12B

.

596-292

STA53

10+

Price Each

50+ 100+ 250+

5+ 10+ 25+

Caution Labels (Reel of 1000)

Style A

Style E

Style B

Style

Label Size mm

Labels (1000/reel)

A

A

A

B

5 5

12.5 12.5

5 0 5 0

1 6 3 8

D

E

C

C

B

B

2 5 5 0

3 8 7 6

12.5 12.5

5 0 5 0

2 5 5 0

1 2 7 5 0

Mftrs.

List No.

L5105

L5104

L5106

L5101

L5102

L5103

L5204

L5206

L5202

L5233

Order Code

177-881

177-880

179-787

177-877

177-878

177-879

936-777

936-789

936-790

936-807

Style C Style D

Ì Self-adhesive

Ì Conform to EN100 015-1

(Styles A & B), and IEC 1340-5-1

(Styles C, D & E)

Ì Suitable for use on packaging and static sensitive equipment

Ì Supplied on reels of 1000

STA57

1+

Price Per Reel

10+ 25+

Prices are in Singapore Dollars and exclusive of GST

Static Awareness Labels

Ì Self adhesive

Ì Single use or reusable

Ì Reels of 500

Ì H=64, W=46

Ì Conform to EN100 015-1

Semiconductors – Static Protection

Conductive Storage Boxes

Reusable

500 Labels

Per Reel

Reusable

Single Use

Single use

Mftrs.

List No.

7101

7102

Order Code

596-164

596-176

1+

Price Per Reel

5+ 20+

STA58

Clear Anti-Static Tape (66m roll) SELLOTAPE

Ì Low electrostatic charge generation

Ì Ideal for sealing bags, boxes, etc.

Ì Suitable for use in Electrostatic Protected

Areas

Ì 2 widths, 12mm and 25mm

Ì Non-marking

Ì Surface resistivity 10 9 to 10 11 Ω

Ì Roll diameter 105mm

STA88

Width

12mm

25mm

Order Code

936-820

168-658

Packing Tape 66m Roll

1+ 5+

Price Each

10+ 50+

1+

Ì Self adhesive

Ì Highly visible, 50mm width

Ì PVC tape for secondary packaging

Ì Anti-static for use in ESD protected areas and proximity packaging

Ì Anti-static tape conforms to

IEC 61340-5

STA56

Price Per Reel

10+ 50+

66m Reel

PVC

Anti-Static

Order Code

177-882

254-411

Storage

Sprung Lid Conductive Miniature Boxes

A range of conductive sprung lid boxes available with either solid colour or clear lids. Manufactured from carbon loaded polypropylene they are dovetail interlocking which allows the user to build a flexible system to their own requirements.

Mftrs.

List No

SSBC1ABLACK

SSBC1BBLACK

SSBC2ABLACK

SSBC2BBLACK

SSBC3ABLACK

SSBC3BBLACK

Lid

Type

Solid colour

Clear

Solid colour

Clear

Solid colour

Clear

Mftrs. List No.

SSBC1ABLACK

SSBC1BBLACK

SSBC2ABLACK

SSBC2BBLACK

SSBC3ABLACK

SSBC3BBLACK

Order Code

596-425

596-437

596-449

596-450

596-462

596-474

† Available until stocks are exhausted

Internal Dimensions

H W D

1 6 1 2 1 2

1 6 1 2 1 2

1 6 2 8 1 5

1 6 2 8 1 5

1 6 2 8 4 0

1 6 2 8 4 0

External Dimensions

H W D

2 1 1 6 2 8

2 1 1 6 2 8

2 1 3 2 2 9

2 1 3 2 2 9

2 1 3 2 5 6

2 1 3 2 5 6

1+

Price Each

10+ 100+

STA47

254-290

175-840 175-842

Ì Durable construction

Ì Conductive polypropylene shells

Ì 6mm conductive foam linings (<10 5 Ω/sq.)

Ì Ideal for ICs and other static sensitive components

Ì Conforms with IEC 61340-5

Ì Hinged lids and secure fastenings

Ì Surface resistivity <10 5 Ω/sq.

Mftrs. List No. L 16 51=175-837, L 16 01=175-838, L 16 11=175-839, L 16 21=175-840,

L 16 31=175-841, L 16 41=175-842, L 16 61=254-290

STA48

Internal Dimensions

H W D

20

13

20

14

11

40

30

33

228

228

138

228

108

91

75

35

126

126

96

126

83

65

51

35

Order Code

254-290

175-837

233-020

175-838

175-839

175-840

175-841

175-842

1+

Price Each

10+ 100+

Single IC Carrier

H=12, W=39, D=26

Ì Unique ‘saddle’ design protects leads

Ì Reusable

Ì Rugged conductive polypropylene

Ì Hinged lids

Ì Suitable DIP sizes 0.3" or 0.4" pitch up to 18 pins and 0.6" pitch up to 28 pins

STA51

Order Multiple=5

Mftrs. List No.

5701

Order Code

595-585

5+

Price Each

100+ 1K+

Conductive Storage Boxes

H

32

32

51

51

W

229

254

203

432

D

Single Card Carriers

305

203

254

457

Mftrs.

List No.

8521

8520

8523

8522

Order Code

997-160

997-171

997-183

997-195

Component Carriers

10

15

15

83

102

180

61

65

65

CH44-2

CH44-3

CH44-4

† Available until stocks are exhausted

997-213

997-225

997-237

Ì Complete protection against physical and static damage

Ì Single Card Carriers designed for pcbs

Ì Anti-static protective foam liners

Ì Component Carriers ideal for IC and discrete packages

Ì Conductive, low density foam inserts

Ì Tough conductive polypropylene casing

Ì Robust, secure catches

Ì Choice of sizes

STA94

1+

Price Each

10+ 50+ continued

11

Internet www.farnell.com

Sales Tel (65) 788 0200 Sales Fax (65) 788 0300

753

Semiconductors – Static Protection

Storage —

Continued

Conductive Drawer Storage Unit

H=126, W=113, D=186

Ì Compact robust storage system

Ì Free-standing conductive unit

Ì Manufactured from carbon loaded polypropylene

Ì Ideal for surface mount devices

Ì 6 removable drawers

Ì 192 covered storage compartments

Ì 32 compartments/drawer, dia=18mm, depth=12mm

Ì Drawers secured by transparent plastic front cover

Ì Supplied with 200 labels

Ì If used outside a static protected area grounding is required

STA46

Order Code

596-383

1+

Price Each

5+ 10+

Cabinets

24 drawer

48 drawer

Drawer Dividers

48 drawer, Pack of 48

Order Code

290-038

290-040

100-784 .

1+

Price Each

4+

Price Per Pack

Stackable Conductive Bin Boxes

Stackable

Ì Conductive coated ‘B’

Flute cardboard

Ì Ideal for DIP tubes

Ì Supplied flat-packed

Open

‘90 Series’ Cabinets

18 and 36 Drawers

Internal Dimensions

H W D

Stackable Bins

108 108

108 203

635

635

Mftrs.

List No

2205

2244

Order Code

596-322

596-334

1+

8+

Price Each

10+ 50+

STA55

Selecting a Service

Test and Calibration

Calibration of equipment is essential in any

Company who have or are in pursuit of a quality assurance approvals. The Process of calibration ensures the accuracy of measurement and hence gives peace of mind to the user, which is important in

R&D, maintenance, and production environments.

11

18 drawers: H=57, W=87, D=135 36 drawers: H=35, W=64, D=135

Cabinets: H=420, W=307, D=146

Conductive cabinets manufactured in electro-galvanised steel, for the safe storage of electrostatic sensitive devices. Each cabinet is supplied with an earthing lead, incorporating a 1MΩ resistor.

Mftrs. List No.

91802=234-886, 93601=419-837

SS1X

1+

Price Each

4+ 8+

Cabinets

18 drawer

36 drawer

Drawer Dividers

36 drawer, pack of 48

Order Code

234-886

419-837

100-784

.

Price Per Pack

‘150 Series’ Cabinets

24 and 48 Drawers

Standard Calibration

1. Instruments Calibrated To Manufactures Specification

2. Calibration Labels

3. Integrity Seals

4. Calibration Certificate

5. All Calibration Results Recorded

6. Results Stored For 5 Years

7. Re-Calibration Advice

8. Suitable For ISO9000

Recalibration

Recalibration reminders will be sent out a month before calibration due dates. A return label will be enclosed for your use.

Recalibration charges are indicated by the charge code along side each product and are the same as newly calibrated product.

T301

725 Portable Wrist Strap Monitor

24 drawers: H=57, W=87, D=135 48 drawers: H=35, W=64, D=135

Cabinets: H=555, W=307, D=150

Conductive cabinets manufactured from electro-galvanised steel, for the safe storage of electrostatic sensitive devices. Each cabinet is supplied with an earthing lead, incorporating a 1MΩ resistor.

Mftrs. List No.

ESD24-02BL=290-038, ESD48-01BL=290-040

SS97X

H=28.6, W=63.5, D=66.7

754

Semiconductors and Passives

Prices are in Singapore Dollars and exclusive of GST

Semiconductors – Static Protection

Personnel Test Stand

Ì Continuous ground monitor for single operator

Ì Ideal for workstation and/or field service use

Ì Compact size

Ì Alarm indicates:

Ground disconnection

Low battery

High resistance wrist strap

Ì Improved grounding clip

Ì Auto switch on/off

Ì Parking snap stand-by feature

Ì PP3 battery required, Order Code 908-526

Wrist Strap Monitor

Dual Conductor Wrist Strap

Dual Conductor Ground Cord

Belt Clip

Mftrs.

List No.

725

2368

2360

723

Order

Code

162-772

996-944

†.

996-956

†.

996-993

1+

Price Each

10+ 50+

STA99

Standard Calibration Charge S

Each

´

Ì Tests wriststrap and footwear

Ì Tests to IEC 61340-5-1

Ì Pass range is 0.1 to 35MΩ for footwear, and

0.75 to 35MΩ for wriststrap

Ì Weight 8kg

This test stand is a free standing test station. It is flat-packed and can be put together in a few minutes. Supplied with footwear tester, H203. Its robust construction makes it suitable for large facilities.

STA123

† Available until stocks are exhausted

Mftrs. List No.

H2023

Order Code

302-6796

1+

Price Each

5+ 10+

Wrist Strap Test Point

Standard Calibration Charge S

Each

´

Ì Wall mounted

Ì Quick and easy to use

Ì Clear instructions displayed on the back plate

Ì Comprises wrist strap checker, earth reference point, back plate and 77mm patch cord

Footwear Test Station

H=178, W=305

Ì Green LED and audible tone indicates 'Pass'

Ì 'Hi-fail yellow LED indication if >35M ohms

Ì 'Low fail' red LED indication if <900k ohms

Ì Accepts 4mm/10mm press-studs and banana plugs

Ì Conforms to EN 100 015-1

Mftrs. List No.

23-9818

Order Code

179-243

Standard Calibration Charge

1+

S

Price Each

3+

Each

´

10+

STA62

Footwear Tester: H=145, W=90, D=34

Wall Panel: H=300, W=600

Test Mat: W=390, D=360

Mftrs. List No.

H223

Order Code

595-950

Standard Calibration Charge

Ì Combined test unit, wall panel and test mat

Ì Checks conductive shoes, heel and toe grounders

Ì “High-Fail”, “Low-Fail” and “Low battery” LEDs

Ì LED and buzzer indicate “pass”

Ì 20V (open circuit) test voltage

Ì 9V PP3 battery required,

Order Code 908-526

Ì Conforms to IEC 61340-5-1

STA64

1+

Price Each

5+ 20+

S

Each

´

11

Wrist Strap Test Station

Wrist Strap Auditing Tester

Wrist Strap Tester

H=145, W=90, D=34

Wall Panel

H=300, W=600

Mftrs. List No.

H221=595-925, H201=595-937.

Order Code

595-925

Ì Test station includes tester and wall panel

Ì "Pass" LED and buzzer

Ì “High-Fail”, “Low-Fail” and “Low battery” LEDs

Ì Sockets for 4mm shrouded plug, 4mm and 10mm press socket

Ì Wrist strap tester available separately

Ì 9V PP3 battery required,

Order Code 908-526

Ì Conforms to IEC 61340-5-1

STA63

1+

Price Each

5+ 20+

Wrist Strap Test Station

Wrist Strap Tester only

Uncalibrated

595-937

Standard Calibration Charge S

Each

´

Ì Function test button

Ì Main lead is 1 metre long

Mains Plug

Schuko Euro Plug

Mftrs.

List No.

H520

H520EU

Standard Calibration Charge

The concept of this auditing system is to test the wrist straps without disconnecting them from their grounding point, hence testing the whole grounding circuit rather than just the wrist strap itself, as it would be done with a conventional tester.

Ì Checks UK 13 Amp mains socket for good earth and correct wiring

Ì Can be used for footwear verification

Ì Ideal for an ESD co-ordinator or auditor

Ì Pass range: 0.75 to 35MΩ ±6%

Ì Red LED indicates fail, green LED and buzzer indicate pass

STA120

1+

Price Each

5+ 10+

Order Code

302-6930

322-4788

S

Each

´ continued

Internet www.farnell.com

´ Please Call our Sales Office

Sales Tel (65) 788 0200 Sales Fax (65) 788 0300

755

Semiconductors – Static Protection

Wrist Strap Tester

Test and Calibration —

Continued

Bench Integrated EBP Touch Tester

Ì Simply ‘Touch to Test’ on demand tester

Ì Can be mounted flush in bench trunking or bench top

Ì 240V mains powered and earthed

Ì Test Voltage is 16V

Ì Pass range: 0.75 to 35MΩ ±6%

Ì Red LED indicates fail, green LED and buzzer indicate pass

Ì Function test button

Ì Front plate: 86 86mm

Ì Lead is 1 metre long

STA121

Mftrs.

List No.

Mains Plug

Schuko Euro Plug

H540

H540EU

Order Code

302-6826

322-4806

1+

Price Each

5+ 10+

Standard Calibration Charge S

Each

´

Portable EBP Tester

Ì Compact

Ì Simple to operate

Ì LED indication of pass/fail

Ì Pass range <10MΩ and 750kΩ

Ì Accepts standard/shrouded banana plugs, and

10mm studs

Ì Low battery indication

Ì Supplied with Dual Lock Wall Mounting Kit, battery and instructions

Ì 746 incorporates a.c. power supply input

H=32, W=95, D=62.5

Wrist Strap Tester

Wrist Strap Tester with PSU

Mftrs.

List No.

745

746

Standard Calibration Charge

† Available until stocks are exhausted

Order Code

997-134†

335-8355

S

1+

Price Each

5+ 10+

Each

´

STA95

11

Ì Provides Earth Bonding Point and wrist strap tester in one block

Ì Simply ‘Touch to Test’ on demand tester

Ì Operators connected to another EBP in proximity of the instrument can test too

Ì For bench top or front mounting

Ì Uses an external power supply

Ì 5V test voltage

Ì Pass range: 0.75 to 35MΩ

Ì Conforms to IEC 61340-5-1

Ì Red LED indicates fail, green LED and buzzer indicate pass

Ì Supplied with mounting screws, power supply, and calibration certificate

This unique instrument provides an EBP with two 10mm snap fastener connections and a tester in one block, and is to be mounted in a convenient place on the operator workstation. Path to ground can also be tested with this instrument. It can be calibrated using Order Code 595-962 calibration box.

STA122

Mftrs.

List No.

Mains Plug

Schuko Euro Plug

H580

H580EU

Order Code

302-6814

322-4790

1+

Price Each

5+ 10+

Standard Calibration Charge S

Each

´

Static Sensor

Mftrs. List No.

709

Ì Measures static voltages on objects and surfaces

Ì Lightweight hand-held unit

Ì Accurate LCD display

Ì 0-1990V and 0-19.9kV

ranges

Ì 2 output jacks for remote monitoring/recording

Ì Battery level check facility

Ì Supplied with 9V battery and operating instructions

H=41, W=67, D=111

STA68

Order Code

681-453

1+

Price Each

3+ 5+

Standard Calibration Charge S

Each

´

Wrist Band and Earth Tester

H=92, W=50,

D=85 (inc. pins)

Ì Simple, easy-to-use earth tester

Ì Plugs directly into 13A mains sockets

Ì Gives audible and visual warning of discontinunity between operator, wrist band and ground cord

Ì Tests mains socket for incorrect polarity

Ì ‘High-Fail’ set at 35MΩ, ‘Low Fail’ at 750kΩ

Ì 4mm and 10mm press studs, and 4mm banana sockets fitted

STA66

1+

Price Each

5+ 20+

Mftrs. List No.

FSK-UK-2

Order Code

557-754

Standard Calibration Charge S

Each

´

Static Field Meter

Mftrs. List No.

713

Order Code

681-441

Ì Locates and measures static charges

Ì Accurate LED display,

0 to ±1999V per inch

Ì Compact, hand-held design

Ì ‘Sample’ and ‘Hold’ reading feature

Ì Low battery indicator

Ì Supplied with isolated plate fixture, lightweight ground card, battery and full operating instructions

H=33, W=61, D=107

STA69

1+

Price Each

3+ 5+

Standard Calibration Charge S

Each

´

Portable 100V Test Kit

´ Please Call our Sales Office

756

Semiconductors and Passives

Ì Includes H700 tester, one H7007 probe and one HA108 concentric ring probe and leads

Ì Handy carry case lined with anti-static foam

Ì Used to measure R

S and floor surfaces and R

G of bench

Ì Supplied with calibration certificate

This kit provides the necessary equipment required to ensure compliance of the EPA’s.

It comprises instruments and accessories in a handy carry case.

STA126

Prices are in Singapore Dollars and exclusive of GST

Mftrs. List No.

HA712

Standard Calibration Charge S

Surface Resistance Test Kit

Order Code

877-669

Standard Calibration Charge

Surface Resistivity Probe

Mftrs. List No.

H1003

Probe Sets

Order Code

302-6747

1+

Each

´

Semiconductors – Static Protection

Resistance Probe

Price Each

5+ 10+

Ì Tests effectiveness of ESD protected

Ì Resistance-to-ground, or point-topoint measurements

Ì Conductive rubber contact surface

Ì Standard 2.3kg weight

Ì 4mm safety socket, accepts ‘standard’ banana plugs

Ì Complies with EN100 015-1 and ESD Association

Standard No 4.1.

Ì For use with ohmeter BM80, Order code 626-247

H=80, Dia=63

STA71

1+

Ì Comprehensive kit for point-to-point and point-to-earth resistance measurements

Ì Kit contains:

One dual voltage surface resistivity meter

(see order code 877-657)

Two cylindrical probes

Two 4mm shrouded test leads

Ì Meter requires a 9V battery, order code

908-526

Ì Supplied in tough, attractive carry case

STA82

Price Each

5+ 10+

H=22

W=87

D=84

Order Code

233-006

S

This probe provides a non-destructive means of testing surface resistivity of flat conductive or static dissipative materials, and complies with EN100 015-1. The probe has two rubber coated brass electrodes in the recommended parallel bar configuration. The probe may be used with Order Code 676-

433 or similar ‘megger’ meter.

1+

Each

´

Price Each

5+

STA70

Concentric Ring Probe

Ì Built in 2.5kg weight

Ì Conductive rubber electrodes

63mm and 30mm diameter

Ì Insulation resistance between electrodes higher than 10 12 Ω at 1000v test voltage

Ì Shrouded sockets for connecting to H801

Ì Supplied in carry case

The concentric ring probe is designed to make surface and volume resistance measurement to

BS IEC 61340-5-1

. It will provide more accurate measurements than a square probe, especially on the high resistance range (for R >

10 9 Ω), as it features uniform electrification lines on the tested material. The probe is fitted with a mechanism to equally distribute the load between its two electrodes.

STA125

Price Each

Mftrs. List No.

HA108

Order Code

302-6759

1+ 5+

Mftrs. List No.

H1007

Order Code

595-731

Calibration Unit

1+

Price Each

5+

Ì All testers require re-calibration annually

Ì For use with Vermason wrist strap and footwear testers

Ì Pre-set to EN100 015-1 settings:

Upper limit 35MΩ

Lower limit 0.75MΩ wriststrap

0.1MΩ footwear

Ì Full operating instructions included

25+

Dual Voltage Surface Resistivity Tester

Ì 100V test voltage, 10V below 10

5

Ì Simple push button operation

Ì 10 4 to 10 12 Ω range

Ì Rubber-coated electrodes

Ì May be used with external probes – order code 595-731

Ì Requires a 9V battery see Order Code 908-

526

Ì Conforms to EN100 015-1

STA80

Order Code

877-657

1+

Price Each

5+ 10+

Standard Calibration Charge S

Each

´

Surface Resistivity Indicator

H=25, W=67, D=115

Ì Ideal for work benches, floors, mats, bags and boxes

Ì Measures between 10

5 and

10

13 ohms/sq.

Ì Yellow warning LED shows

>10 13 insulator

Ì Red LEDs indicate 10 5 -10 12 range

Ì Uses ASTM recommended parallel bar method

Ì Also measures surface-to-ground via cable provided

Ì Supplied with soft carry case

Ì Requires PP3 battery, order code 908-526

STA72

Price Each

Mftrs. List No.

H703

Order Code

212-878

1+ 5+

Standard Calibration Charge S

Each

´

2 piece probe set

3 piece probe set

Ì Used to measure R

S

, R

Ì HA1011 contains one

G concentric ring probe and one cylindrical probe

Ì HA1013 contains one concentric ring probe and two cylindrical probes

Probes are often bought singly but the convenience of probe sets makes them popular too. These sets are packaged in a handy anti-static foam-lined carrying case that measures 300 230 80mm. The case is attractively labelled.

STA124

1+

Price Each

5+ Mftrs. List No.

HA1011

HA1013

Order Code

302-6760

302-6772

Mftrs. List No.

H3000

Order Code

595-962

Standard Calibration Charge

1+

S

Price Each

5+

Each

´

20+

STA65 continued

´ Please Call our Sales Office

11

Internet www.farnell.com

Sales Tel (65) 788 0200 Sales Fax (65) 788 0300

757

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement