FWA-3300 User manual
FWA-3300 User manual
Rackmount Internet Security Platform with 4 GbE Front LAN Ports / 2 PCI
Expansion Slots/ LCD Display
Advantech Internet Security Platform
Copyright Notice
This document is copyrighted, 2007. All rights are reserved. The original manufacturer
reserves the right to make improvements to the products described in this manual at
any time without notice. No part of this manual may be reproduced, copied, translated
or transmitted in any form or by any means without the prior written permission of the
original manufacturer. Information provided in this manual is intended to be accurate
and reliable. However, the original manufacturer assumes no responsibility for its use,
nor for any infringements upon the rights of third parties which may result from its use.
CE Notification
The FWA-3330, developed by Advantech Co., Ltd., has passed the CE test for
environment specifications when shielded cables are used for external wiring. We
recommend the use of shielded cables.
1st Edition Printed in Taiwan March 2007
Product warranty
Advantech warrants to you, the original purchaser, that each of its products will be free
from defects in materials and workmanship for two year from the date of purchase.
This warranty does not apply to any products which have been repaired or altered by
persons other than repair personnel authorized by Advantech, or which have been
subject to misuse, abuse, accident or improper installation. Advantech assumes no
liability under the terms of this warranty as a consequence of such events.
Because of Advantech’s high quality-control standards and rigorous testing, most of our
customers never need to use our repair service. If an Advantech product is defective, it
will be repaired or replaced at no charge during the warranty period. For
out-of-warranty repairs, you will be billed according to the cost of replacement
materials, service time and freight. Please consult your dealer for more details. If you
think you have a defective product, follow these steps:
1.
2.
3.
4.
5.
Collect all the information about the problem encountered. For example, CPU
speed, Advantech products used, other hardware and software used, etc. Note
anything abnormal and list any on-screen messages you get when the problem
occurs.
Call your dealer and describe the problem. Please have your manual, product, and
any helpful information readily available.
If your product is diagnosed as defective, obtain an RMA (return merchandise
authorization) number from your dealer. This allows us to process your return
more quickly.
Carefully pack the defective product, a fully-completed Repair and Replacement
Order Card and a photocopy proof of purchase date (such as your sales receipt) in
a shippable container. A product returned without proof of the purchase date is not
eligible for warranty service.
Write the RMA number visibly on the outside of the package and ship it prepaid to
your dealer.
Packing List
Before installation, ensure that the following materials have been received:
ٛ
ٛ
ٛ
ٛ
ٛ
One FWA-33000 Internet Security Platform
One box of accessories
One warranty certificate
If any of these items are missing or damaged, contact your distributor or sales
representative immediately.
Technical Support and Sales Assistance
If you have any technical questions about the FWA-3700 or any other Advantech
products, please visit our support website at:
http://www.advantech.com.tw/support
ٛ
http://www.advantech.com.
ٛ
For more information about Advantech's products and sales information, please visit:
Contents
1. General Information....................................... 1
1.1 Introduction....................................................................................... 1
1.2 Features............................................................................................ 1
1.3 Specifications..................................................................................... 1
1.4 Dimensions.........................................................................................3
1.5 Model List...........................................................................................3
2. System Setup............................................... 4
2.1 Removing the cover............................................................................. 4
2.2 Installing CPU Heat-sink ...................................................................... 5
2.3 Installing Memory Module......................................................................6
2.4 Installing Hard Drive.............................................................................7
2.5 Installing Compact Flash........................................................................7
Appendix A..........................................................8
A.1 NAME-3300 Mother Board.......................................................................8
Figures
Figure 2-1: Front view of FWA-3300......................................................................... 4
Figure 2-2: Removing the cover............................................................................... 4
Figure 2-3: Top view of FWA-3300........................................................................... 5
Figure 2-4: Installing CPU Heat-sink......................................................................... 5
Figure 2-5:Installing Memory Module steps............................................................... 6
Figure 2-6: Installing Hard Disk Drive steps............................................................... 7
Figure 2-7: Installing Compact Flash steps................................................................. 7
1
General Information
1.1 Introduction
The FWA-3300 is a cost effective and power efficient Internet Security Platform
designed for entry-level small/medium business (SMB) security applications. The
platform is driven by the power saving VIA C7™ CPU, combined with the VIA CX700
chipset, making it the ideal alternative for an economical entry level security solution.
The VIA C7 processor has a built-in PadLock Security Engine, which is a fast and
reliable hardware security accelerator without the added cost of an extra add-on card.
With support from Marvell 8001 Ethernet controllers, the FWA-3300 provides four
Gigabit Ethernet (GbE) LAN ports for robust connectivity.
The FWA-3300 supports optional IDE or SATA HDD, which effectively enhances the
implementation of many Internet security applications such as IDS/IPS, anti-virus,
and VPN gateways. Two onboard PCI expansion slots are available for add-on cards
and added expandability. A CompactFlash slot is available for OS and Application
updates, which can be easily accessed and replaced through an easily removable
cover on the back. Plus, there is an optional LCD module on the front panel to display
platform status, and a 9-pin RS-232 serial port for local system management,
maintenance & diagnostics. The FWA-3300 is FCC, CE, UL, CCC and RoHS compliant.
For more information on the VIA PadLock Security Engine, please visit
http://www.via.com.tw/en/initiatives/padlock/index.jsp
1.2 Features
ٛ
ٛ
ٛ
ٛ
ٛ
ٛ
ٛ
Supports VIA C7® Processor
DDR2 400/533 SODIMM, up to 1 GB
Four 10/100/1000 Mbps GbE LAN ports
Supports one fixed 3.5" IDE or SATA HDD
Two 32-bit/33 MHz PCI expansion slot
LCD display module
VIA PadLock™ Security Engine for hardware crypto acceleration
1.3 Specifications
• Processor System:
CPU: VIA C7 1.0GHz processor
Max. Speed: 533/400 MHz FSB
L2 Cache: 128B
Chipset: VIA CX700
BIOS: Award 4 Mb Flash
1
Memory: Support DDR2 533/400, Max. Capacity 1 GB,Socket 200-pin SOD DIMMx 1
Ethernet: 4 10/100/1000 Gigabit Ethernet, RJ-45 x 4
Drive Bay: 3.5”HDD x1
Management: Console RS-232 x1
Cooling: Fan (15 CFM) x2
Miscellaneous: Power Switch, 2 LED indicators for Power/HDD, CompactFlash
Socket x1, LCD Display Module x1
• Adapter Power Requirement: Input: AT PS, AC 90 ~ 264 V @ 47 ~ 63 Hz, full range Output:
180W
• Operating Environment: Operating: Temperature 0 ~ 40 °C (32 ~ 104 °F), Humidity 5 ~ 85 %
ٛ
ٛ
Non-Operating: Temperature -20 ~ 80 °C (-4 ~ 167 °F), Humidity 5 ~ 95 %
Dimensions (W x H x D): 1U: 426 x 44 x 337 mm (16.8" x 1.7" x 13.3")
Weight: 4.5 Kg (9.9 lb)
2
1.4 Dimensions
1.5 Model List
FWA-3300E: 1U rackmount Internet security platform, 2 32-bit/33 MHz PCI
ٛ
expansion slots (Optional for customization), LCD display module, Four 10/100 GbE
Ethernet ports supporting
3
2
System Setup
Setting up your FW-3300 requires only a screwdriver and a small amount of time.
Before you begin, you should also gather together all of the device you plan to install,
as well as the CPU, RAM, HDD, and etc. The front panel of FWA-3300 includes a LCD
display module, four Ethernet ports, a RS-232 console port, and two LEDs where one
is power LED and another is HDD LED. On the rear panel, there is a power switch
located on the top left hand corner.
USB
COM
LCM module
4 GbE Lan
Figure 2-1: Front view of FWA-3300
2.1 Removing the cover
There are screws which secure the cover to the chassis. They are along the sides,
near the top. Remove them, and then slide the cover to the rear of the chassis.
Figure 2-2: Remove top cover
4
PSU
HDD
PCI riser
card
LCD
module
CPU
Figure 2-3: Inside of FWA-3300
2.2 Installing CPU Heat-sink
1
Apply the thermal tape to provide better heat conduction between your CPU
and cooling fan. Position the heat-sink on top of the CPU. Use screw driver to fix the
heat-sink sequence.
2
Make sure the CPU fan power connector is plugged to the motherboard fan
power connector, than installing CPU is completed.
1
4
2
Figure 2-4: Install CPU Heat-sink
5
3
2.3 Installing Memory Module
1
Unlock a DIMM socket by. Align the notch of the DIMM memory module to
match on the socket and insert the DIMM into the socket until the DIMM is properly
seated.
2
Press the DIMM inward to lock the DIMM memory module. Installing memory
module is completed.
RAM module
Figure 2-5: Install RAM module
6
2.4 Installing Hard Disk Drive
1
Unscrew each side of the HDD supporting frame on the chassis and pull it out.
2
Put the HDD above the HDD supporting frame and position the screws
accordingly.
3
Screw each side of the HDD supporting frame to fix on the chassis.
4
Connect the SATA cable included in the accessory box to the connector on the
HDD. Connect power connector to the HDD. Installing Hard Disk Drive is completed.
Figure 2-6: Install HDD
2.5 Installing Compact Flash
1.
Position a CompactFlash disk accordingly in the CompactFlash disk socket and
push it inward. Installing CompactFlash disk is completed.
Figure 2-7: Install CF card
7
A
Pin Assignments
APPENDIX
A.1 NAME-3300 Mother Board
VGA
AT power
IDE
SATA
JCMOS1
CPU
1GHz
PS2 KB/M
USB
PCI
golden
finger
PRT
COM
LAN ports
8
Jumper setting of FWA-3300:
No.
Jumper
Name
Description
Default Setting
1
J1
System Reset
Off
2
J3
ATX Power On
On
3
J4
HDD Active LED ( Only for
On for FWA-3300
FWA-3300 )
4
JCMOS1 CMOS Clear Jumper
Connect Pin 1 and Pin 2 ( Connect Pin 2 and Pin 3 to
clear CMOS )
5
JP_HWM1 Internal Buzzer
On
No. Connector
Description
6
CN_KBMS1
PS2 KB/Mouse connector
7
CN_COM1
D-SUB COM port connector
8
CN1 ~ CN4
Gigabit Ethernet connector
9
CN7
USB PIN header (3,4)
10 USB1
USB connector (1,2)
11 CN_COM2
COM2 PIN header
12 CN8
Printer port PIN header
13 GPIO1
General purpose Input/Output PIN
14 CN5 ~ CN6
SATA connector
15 CN_IDE1
44PIN IDE PIN header for 2.5" HDD
16 CN_VGA1
VGA 15P PIN header
17 CN9
DC IN AT power supply connector
Jumper & connector location notice of item no.:
9
17
16
3
14
4
1
2
5
12
6
9
11
13
15
8
10
7
10
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising