Vivitek Qumi Q5 Manual

Vivitek Qumi Q5 Manual
Downloaded From projector-manual.com Vivitek Manuals
Preface
Copyright
©2012 Vivitek Corporation.
is a trademark of Vivitek Corporation. Other
trademarks are the properties of their respective owners. Values, weights and dimensions
are approximate. Specifications are subject to change without prior notice.
Disclaimer
The information in this document is subject to change without notice. The manufacturer
makes no representations or warranties with respect to the contents hereof and
specifically disclaims any implied warranties of merchantability or fitness for any particular
purpose. The manufacturer reserves the right to revise this publication and to make
changes from time to time in the content hereof without obligation of the manufacturer to
notify any person of such revision or changes.
Trademark Recognition
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC in the
United States and other countries.
All other product names used in this manual are the properties of their respective owners
and are acknowledged.
Downloaded From projector-manual.com Vivitek Manuals
ii
Important Safety Information
Important:
It is strongly recommended that you read this section carefully before using the Qumi.
These safety and usage instructions that will make sure you enjoy many years of safe use
of the Qumi. Keep this manual for future reference.
Symbols Used
Warning symbols are used on the unit and in this manual to alert you of hazardous
situations.
The following styles are used in this manual to alert you to important information.
Note:
Provides additional information on the topic at hand.
Important:
Provides additional information that should not be overlooked.
Caution:
Alerts you to situations that may damage the unit.
Warning:
Alerts you to situations that may damage the unit, create a hazardous environment, or
cause personal injury.
Throughout this manual, component parts and items in the OSD (On-Screen Display)
menus are denoted in bold font as in this example:
“Press the Menu button on the remote control to open the Main menu.”
General Safety Information
• Do not open the unit case. There are no user-serviceable parts in the unit. For
servicing, contact qualified service personnel.
• Follow all warnings and cautions in this manual and on the unit case.
• The projection light source is extremely bright by design. To avoid damage to eyes,
do not look into the lens when the LED illumination is on.
• Do not place the unit on an unstable surface or stand.
• Avoid using the system near water, in direct sunlight, or near a heating device.
• Do not place heavy objects such as books or bags on the unit.
Downloaded From projector-manual.com Vivitek Manuals
iii
Qumi Installation Notice
• Allow at least a 50cm clearance around the exhaust vent.
Minimum 100mm
Minimum 500mm
• Make sure that the intake vents do not recycle hot air from the exhaust vent.
• When operating the Qumi in an enclosed space, make sure that the surrounding air
temperature within the enclosure does not exceed operating temperature while the
Qumi is running, and the air intake and exhaust vents are unobstructed.
• All enclosures should pass a certified thermal evaluation to make sure that the Qumi
does not recycle exhaust air, as this may cause the device to shutdown even if the
enclosure temperature is with the acceptable operating temperature range.
Caution:
Avoid using the Qumi in dusty environments.
Downloaded From projector-manual.com Vivitek Manuals
iv
Power Safety
• Only use the supplied adapter.
• Do not place anything on the cord. Place the cord where it will not be in the way of
foot traffic.
• Remove the battery from the remote control when storing or not in use for a
prolonged period.
Cleaning the Qumi
• Unplug the cord before cleaning. See Cleaning the Qumi on page 41.
Note:
The Qumi will be warm after usage. Allow Qumi to cool down before storing in a
compartment.
Regulatory Warnings
Before installing and using the Qumi, read the regulatory notices in the Regulatory
Compliance on page 50.
Symbol Explanations
DISPOSAL: Do not use household or municipal waste collection services for
disposal of electrical and electronic equipment. EU countries require the use
of separate recycling collection services.
Main Features
• Lightweight unit, easy to pack away and transport.
• Compatible with all major video standards including NTSC, PAL, and SECAM.
• A high brightness rating allows for presentations in daylight or in lit rooms.
• Supports data resolution up to UXGA at 16.7 million colors to deliver crisp, clear
images.
• Flexible setup allows for front, rear, ceiling and rear ceiling projections.
• Line-of-vision projections remain square, with advanced keystone correction for
angled projections.
• Input source automatically detected.
About this manual
This manual is intended for end users and describes how to install and operate the Qumi.
Wherever possible, relevant information—such as an illustration and its description—has
been kept on one page. This printer-friendly format is both for your convenience and to
help save paper, thereby protecting the environment. It is suggested that you only print
sections that are relevant to your needs.
Downloaded From projector-manual.com Vivitek Manuals
v
Table of Contents
Preface................................................................................................................... ii
Chapter 1 At a Glance................................................................. 1
Overview................................................................................................................. 1
Accessories............................................................................................................ 3
Remote Control....................................................................................................... 4
Qumi and Remote Control Buttons......................................................................... 4
Media Player Screen.............................................................................................. 5
Chapter 2 Getting Started........................................................... 6
What You Need....................................................................................................... 6
Setting Up Qumi..................................................................................................... 7
Setting Up the Remote......................................................................................... 13
Chapter 3 Qumi Media Suite..................................................... 14
Overview............................................................................................................... 14
Music.................................................................................................................... 15
Movies.................................................................................................................. 17
Photos................................................................................................................... 18
Office Viewer......................................................................................................... 19
Wifi........................................................................................................................ 20
Web browser......................................................................................................... 21
Wifi Display........................................................................................................... 22
Settings................................................................................................................. 23
Chapter 4 On-Screen Display (OSD) Settings........................ 25
OSD Menu Controls.............................................................................................. 25
Setting the OSD Language................................................................................... 26
OSD Menu Overview............................................................................................ 27
OSD Sub-Menu Overview.................................................................................... 28
Image Menu ......................................................................................................... 29
Computer Menu.................................................................................................... 31
Video/Audio Menu................................................................................................. 32
Installation I Menu................................................................................................. 34
Installation II Menu................................................................................................ 36
Chapter 5 Taking Care of Your Qumi....................................... 41
Cleaning the Qumi................................................................................................ 41
Cleaning the Lens................................................................................................. 41
Troubleshooting.................................................................................................... 42
Vivitek Support Site............................................................................................... 45
Specifications........................................................................................................ 46
Projection Distance vs. Projection Size................................................................ 47
Projection Distance and Size Table...................................................................... 47
Timing Mode Table................................................................................................ 48
Qumi Dimensions................................................................................................. 49
Regulatory Compliance........................................................................................ 50
Safety Certifications.............................................................................................. 50
Disposal and Recycling........................................................................................ 50
Downloaded From projector-manual.com Vivitek Manuals
vi
Chapter 1 At a Glance
Overview
Front/Top/Right View
Keypad
See Keypad - On-Screen Display
(OSD) buttons
Cooling Vent
Do not cover
Cooling Vent
Do not cover
Lens
Projection Lens
Focus ring
Focus the projected image
Keypad
Menu
Open and exit the OSD
buttons
Up Cursor
Navigate and change settings in the
OSD
Enter Cursor
Change settings in the OSD
Right Cursor
Left Cursor
Navigate and change settings in the
OSD
Navigate and change settings in the
OSD
Down Cursor
Navigate and change settings in the
OSD
Downloaded From projector-manual.com Vivitek Manuals
1
Rear/Top/Left View
DC In
Connect the supplied power adapter
Audio Out
Power Switch
Connect an audio cable to speakers
or headphones
Turn on/off the Qumi
AV In
Universal I/O
Connect the AV IN cable from a video
device
Connect a RGB or component cable
from a device
USB
HDMI
Connect an USB drive or device
Connect a HDMI cable from a HDMI
device
IR Receiver
Receive IR signal from the remote
control
Bottom View
Docking Connector
Dock to optional battery pack
(Remove the sticker before use)
Rubber Foot Pad
Stability and maintain cooling
ventilation
Tripod Connecting Slot
Tripod not included
(Remove the sticker before use)
Cooling Vent
Do not cover
Downloaded From projector-manual.com Vivitek Manuals
2
Accessories
Along with the Qumi, the following accessories are included:
Remote Control
(With one 3V CR2025 battery)
Standard HDMI Cable
VGA Cable
Regional Power Cord and Power Adapter
W A R R A N T Y
Documentation Kit
(User Manual, Quick Start Guide, Warranty
Card)
Carrying Case
Cable Cores (x2)*
Audio/Video Cable
Q5 WIFI Dongle (Optional)
Contact your dealer immediately if any items are missing, appear damaged, or if the unit
does not work. It is recommended that you keep the original packing material should you
ever need to return the equipment for warranty service.
Note:
Accessories will vary from model to model.
* To ensure a high quality performance from your project and to prevent electromagnetic
interference (EMI), equip the VGA or HDMI video source cable with the included cable
cores.
Downloaded From projector-manual.com Vivitek Manuals
3
Remote Control
Enter
Up Cursor
Change settings in the OSD.
Enter function when using web browser.
Navigate and change settings in the OSD.
Cursor navigation when using web
browser.
Right Cursor
Navigate and change settings in the OSD.
Cursor navigation when using web
browser.
ON/OFF
Turn on or off Qumi.
Left Cursor
Down Cursor
Navigate and change settings in the OSD.
Cursor navigation when using web
browser.
Navigate and change settings in the OSD.
Cursor navigation when using web
browser.
Mouse
Exit
Mouse left key when using the Web
browser.
Close the OSD.
Exit function when using web browser.
Mute
Mute the built-in speaker.
Menu
Source
Open and exit the OSD.
Change the input source.
Page Up/Down
Volume Up/Down
Page up and down when using the Web
browser.
Change the volume.
Important:
1. Be sure nothing obstructs the path between the remote control and the Qumi. If the path
between the remote control and the Qumi is obstructed, the signal can bounce off certain
reflective surfaces.
2. The buttons and keys on the Qumi have the same layout and similar functions as the
corresponding buttons on the remote control. This user’s manual describes the functions
based on the remote control.
Qumi and Remote Control Buttons
The Qumi can be operated using the remote control or the keypad on the top of the
Qumi. All operations can be carried out with the remote control; however, the keypad
on the Qumi carries out the same operations as the remote control by pressing a
combination of keys.
The remote control is not only used to navigate the cursor in the menus, but can also be
used to control the media functions (music and video playback). For more details about
how to control the media functions with the remote control, please refer to 14.
Downloaded From projector-manual.com Vivitek Manuals
4
Media Player Screen
The media player screen is the main interface for the Qumi Q5 Series. If a USB drive is
plugged in when powering on the Qumi, the media player screen appears. In the media
player screen, you can choose the type of media to display by selecting:
• Music – A music player that supports many types of audio files, ready to play music.
• Movie – An easy to use movie player that displays multiple movie formats.
• Photo – A photo viewer that contains slide show functionality.
• Office viewer – A document viewer that displays documents.
• Wifi Display – Use this to configure the connection to a wireless access point.
• Web browser – A Web browser for surfing the Internet.
• Wifi – Use this to choose a Wi-Fi access point.
• Settings – The settings of the Qumi can be adjusted in this menu.
Note:
Wifi & WebBrowser functions are only available with Q5’s optional dongle.
Downloaded From projector-manual.com Vivitek Manuals
5
Chapter 2 Getting Started
What You Need
Many types of external devices and peripherals can be connected to the Qumi. External or
portable music players can be connected to play music. DVD, VCD and VHS players can
be connected to play movies. Camcorders and digital cameras can also be used to play
videos and display photos. Computers can be connected, as well as peripherals such as
USB drives to display documents and other types of media.
These devices can be connected to the Qumi by using an appropriate cable. Make sure
that the connecting device has an appropriate output connector.
Connect video or Apple® devices
Connect AC power adapter
Connect HDMI peripherals
Connect audio
Connect personal computers or
Apple® devices
Insert USB device
Warning:
As a safety precaution, disconnect all power to the Qumi and connecting devices before
making connections.
Downloaded From projector-manual.com Vivitek Manuals
6
Setting Up Qumi
Connecting Apple® Devices
Connect an Apple® device to the Qumi by using the following:
Apple® Connection Kit
iPhone
iPod
iPad
VGA to Apple® Video Adapter (Optional)
iPhone
iPod
iPad
(Available at Apple Store)
Connecting Peripherals by HDMI
Connect HDMI-compatible peripherals to the Qumi using the mini to Standard HDMI cable
(Optional).
Camera Smartphone
Game
Console
Downloaded From projector-manual.com Vivitek Manuals
7
Personal
Computer
Connecting Personal Computers
Connect a personal computer to the Qumi by using the VGA cable.
Personal
Computer
Note:
The personal computer must have a VGA output port to use the VGA cable to connect to
the Qumi.
Inserting a USB Drive
Connect a USB drive to the Qumi by inserting the storage device(s) into the appropriate
port.
Connecting Video
Connect video devices to the Qumi by using the audio/video cable.
Game
Console
Downloaded From projector-manual.com Vivitek Manuals
8
DVD
Player
Connecting Audio
Connect earphones or mini speakers to the Qumi by inserting into the Audio Out port.
Earphone
Starting and Shutting down the Qumi
1.
Connect the AC power adapter
to the Qumi. Connect the other
end of the AC power adapter to
a wall outlet.
Note:
Adapter models may vary
between regions.
2.
Press the
POWER button to
turn on the Qumi.
The Qumi splash screen
displays and connected devices
are detected.
See Setting an Access
Password (Security Lock) on
page 11 if security lock is
enabled.
Downloaded From projector-manual.com Vivitek Manuals
9
Mini Speaker
3.
If more than one input device is
connected, press the SOURCE
button on the remote control
and use the ▲ or ▼ buttons to
select the applicable device or
press ▲ and ▼ or ◄ and ► at
the same time on the keypad on
the Qumi.
• VGA: Analog RGB,
Component: DVD
input YCbCr / YPbPr,
or HDTV input YPbPr
• Composite Video:
Traditional composite video
• HDMI: HDMI / DVI
4.
5.
• USB: USB disc
Press the
POWER button to
turn off the Qumi.
When the “Power Off? /Press
Power again” message appears,
press the
POWER button.
The projector turns off.
Adjusting the Image
If the projected image is not clear, the image can
be adjusted by moving the focus ring up or down
until the image is clear.
Downloaded From projector-manual.com Vivitek Manuals
10
Setting an Access Password (Security Lock)
To prevent unauthorized use of the Qumi, you can create a password. When the access
password function is enabled, the password must be entered after the Qumi has been
turned on.
Creating a password can be done by performing the following steps:
1.
2.
3.
4.
5.
Press the MENU button on
the remote control or press
MENU and
on the keypad
simultaneously to open the OnScreen Display (OSD) menu.
Move the cursor to the
Installation I tab and scroll
down to select Advanced.
Press the ▲ or ▼ button to
select Security Lock.
Press the ◄ or ► button to
enable or disable the security
lock function.
A password dialog box
automatically appears.
You can use the ▲▼◄►
buttons located either on top
of the Qumi or on the remote
control to enter the password.
Any combination of the
navigation buttons can be used
(five must be chosen).
Press the navigation buttons in
any order to set the password.
Then press the MENU button to
exit the dialog box.
Downloaded From projector-manual.com Vivitek Manuals
11
6.
The password confirmation
menu appears when you
power on the Qumi when the
Security Lock is enabled.
Enter the password that was
created in step 5.
Important:
Keep the password in a safe place. Without the password, you will not be able to use
the Qumi. If you lose the password, contact your reseller for information on resetting the
password.
Using a Tripod
The Qumi can be used with a tripod by connecting
the tripod to the bottom of the Qumi. Many typical
tripods can be connected.
Supported Tripod Specifications:
• Type: Mini tripod
• Slot size: 1/4-20 L6.3 mm
Note:
Remove sticker before use.
Downloaded From projector-manual.com Vivitek Manuals
12
Setting Up the Remote
The remote control comes with one (1) 3V lithium
battery (CR2025). The battery is pre-installed in
the remote control.
To begin using the remote control, remove the
plastic tab (A) from the battery compartment.
A
Replacing the Remote Control Batteries
1.
A
Remove the battery
compartment cover
by sliding the cover
towards the arrow
(A). Then pull out
the cover towards
the arrow (B).
2.
Remove the old
battery and insert
the new battery
with the positive
side facing up.
3.
Install the cover.
B
Caution:
1. Use only a 3V lithium battery (CR2025).
2. Dispose of used batteries according to local ordinance regulations.
3. Remove the battery when not using the Qumi for prolonged periods.
Operating Range
The remote control uses infrared (IR) transmission to control the Qumi. It is not necessary
to point the remote directly at the Qumi.
The remote control functions properly within a radius of approximately 7 meters (23 feet)
and 15 degrees above or below the Qumi level (if the remote is not held perpendicular to
the sides or rear of the Qumi).
If the Qumi is unresponsive to the remote control, move closer towards the Qumi.
Downloaded From projector-manual.com Vivitek Manuals
13
Chapter 3 Qumi Media Suite
Overview
The Qumi Media Suite is designed to provide easy access to your files from an inserted
USB drive. Music, movies, pictures and documents can be displayed.
The media suite menu contains 8 applications that can be accessed:
• Music – A music player that supports many types of audio files, ready to play music.
• Movie – An easy to use movie player that displays multiple movie formats.
• Photo – A photo viewer that contains slide show functionality.
• Office viewer – A document viewer that displays documents.
• Wifi Display – Use this to configure the connection to a wireless access point.
• Web browser – A Web browser for surfing the Internet.
• Wifi – Use this to choose a Wi-Fi access point.
• Settings – The settings of the Qumi can be adjusted in this menu.
Note:
Wifi & Web browser functions are only available with Q5’s optional dongle.
Downloaded From projector-manual.com Vivitek Manuals
14
Music
Supported Formats:
The music player can play music files in the following formats:
• MP3 (up to 256Kbps bit-rate)
• WMA, MID, MIDI, MP1, MP2, OGG, AAC, AMR, WAV, AC3, M4A, AWB, APE
Playing your Track
To open the music list, perform the following:
1. Press the ◄ or ► button to select the Music icon in the media suite menu.
2. Press
to open the file directory.
3. Select the folder containing the desired song.
4. Press
to play the desired song.
A song can be paused or can be played by selecting the Pause/Play button in the music
player interface.
When the cursor is selecting the progress bar, a song can be paused or can be played by
pressing
.
Control Interface
The music player interface contains the following controls:
Downloaded From projector-manual.com Vivitek Manuals
15
The music player provides controls to navigate through a song playlist. The following table
provides a description the controls.
ACTION
/
/
DESCRIPTION
Toggle speaker output to Left/Right/Stereo
/
Return to previous/Forward to next track
/
Pause/Play track
Stop playback
Return to the previous menu
The order of songs and playback mode can be adjusted. The following table provides a
description of the playback modes.
ACTION
DESCRIPTION
Songs in the playlist will play in a continuous order
All songs in the playlist will repeat
Only the current song playing will repeat
All songs in the playlist will be shuffled during playback
The music player contains many preset equalizer settings that can be applied. The
following table provides a description of the different equalizer settings.
ACTION
DESCRIPTION
Normal
Classical
Jazz
Pop
Rock
Bass
Downloaded From projector-manual.com Vivitek Manuals
16
Movies
Supported Formats
The following video formats are supported:
• H.264 video up to 720p at 30 frames per second; Main Profile level 3.1 with AAC-LC
audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
• MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels at 30 frames per second; Simple
Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v,
.mp4, and .mov file formats
• Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second,
audio in U-Law, PCM stereo audio in .avi files
Watching Your Movie
To open a list of movies, perform the following:
1. Press the ◄ or ► button to select the Movie icon in the media suite menu.
2. Press
to open the file directory.
3. Select the folder containing the desired movie file.
4. Press
to play the desired movie file.
While a movie is playing, the control interface can be hidden. To hide the control interface,
press the ▲ button. Press the ▲ button again to show the control interface.
The control interface will automatically disappear if there is no user input for 5 seconds.
Control Interface
The following playback functions are controlled by the remote control, which are shown in
the table below:
ACTION
DESCRIPTION
Pause/Resume
Press
Forward speed
Press the ◄ or ► key to change the speed (2X, 4X, 8X, 16X, 32X)
Downloaded From projector-manual.com Vivitek Manuals
to pause or resume a movie
17
Photos
Supported Formats
The photo viewer can open the following types of image files:
• BMP (up to 4000 x 3000 pixels)
• PNG (up to 4000 x 3000 pixels)
• JPG (up to 4000 x 3000 pixels)
Viewing Your Photo
When a USB storage drive is inserted, the storage card folder icon will display in the file
directory.
To open a photo in photo viewer, perform the following:
1. Press the ◄ or ► button to select the Photo icon in the media suite menu.
2. Press
to open the file directory.
3. Select the folder containing the desired photo.
4. Press
to display the desired photo.
To view the details of the photos, navigate to a photo. The details of the photo will appear
on the bottom of the screen.
To view photos in full screen mode, perform the following:
1. Navigate to a photo.
2. Press
to view the photo in full screen mode.
To utilize the Zoom-In tool, press
. (2X, 4X, 8X, 16X).
In order to zoom out to the default size of the image, press the Exit key.
While a photo is displayed, the control interface can be hidden. To hide the control
interface, press the ▲ button. Press the ▲ button again to show the control interface.
Control Interface
The photo viewer contains the following controls:
ACTION
DESCRIPTION
Return to the previous menu.
Sets the Slide Show interval.
View photos in Slide Show mode.
Rotate the photo in a counter-clockwise position.
Rotate the photo in a clockwise position.
Downloaded From projector-manual.com Vivitek Manuals
18
Office Viewer
Supported Formats
The document viewer in the Qumi Media Suite can open the following types of documents:
• Microsoft® Word (97-2007, .doc/.docx)
• Microsoft® PowerPoint (97-2007, .ppt/.pptx)
• Microsoft® Excel (97-2007, .xls/.xlsx)
• Adobe® PDF (.pdf)
• Text (.txt)
Selecting Your Document
To open a file in document viewer, perform the following:
1. Press the ◄ or ► button to select the office viewer icon in the media suite menu.
2. Press
to open the file directory.
3. Select the folder containing the desired file.
4. Press
to display the desired file.
Once a file is open, press
to zoom in for a larger view of the file. Files can be zoomed
in 2X, 4X, 8X and 16X views. Use the navigation keys to move the view of the file.
To proceed to the next page or return to a previous page, press the ▲ or ▼ button.
Note:
You cannot move to the previous or next page if the view is zoomed in.
Control Interface
The office viewer does not contain a dedicated control interface.
Downloaded From projector-manual.com Vivitek Manuals
19
Wifi
Turning on Wifi
When the optional Q5 WIFI USB Dongle is inserted, you can surf the Web via Wi-Fi by
using the Web browser.
To turn on Wifi, perform the following:
1. Press the ◄ or ► button to select the Wifi icon in the media suite menu.
2. Press
to enter Wifi Settings.
3. Press the ◄ or ► button to select Enable and then press
4. Press the ◄ or ► button to select
and then press
5. Press the ▲ or ▼ button to select an AP and then press
to turn on Wifi function.
to search for APs.
to connect.
Note:
1. The Wifi function is only available with Q5’s optional dongle.
2. Press Page Up on the remote control to return to the top of the function area. From
here, you can refresh the AP list.
3. Press Page Down to move to the bottom of the AP list when in the function area.
Control Interface
The Wifi Setting contains the following controls:
ACTION
DESCRIPTION
Return to Main Window.
Rescan all APs.
Enable/Disable Wifi.
Wifi configuration.
Downloaded From projector-manual.com Vivitek Manuals
20
Web browser
Visiting a website
1. Plug the optional Q5 Wi-Fi Dongle into Qumi’s USB socket.
2. Press ▲ ▼ ◄ ► on the remote control to control the cursor. See Remote Control on
page 4.
3. Use the remote control for navigation control. Press the Q icon (bottom-right) to
access the address bar.
4. Press
to display the virtual keyboard, or press
in the address bar.
Note:
Plug a USB hub into Qumi’s USB socket, then plug the optional Q5 Wi-Fi dongle, keyboard
and mouse into the USB hub to surf the Internet easily.
Control Interface
The Main bar contains the following controls:
ACTION
DESCRIPTION
Go back one page.
Go to next page.
Reload current page/Stop loading current page.
Back to Home page.
Enter bookmark page.
Add/Delete current page to bookmark
Click to enter URL input page.
Zoom in/out page.
Clear History and Exit browser.
Downloaded From projector-manual.com Vivitek Manuals
21
Wifi Display
Control Interface
The Wifi Display contains the following controls:
ACTION
DESCRIPTION
Start playing media from Wi-Fi.
Projector SSID
Enter the Service Set Identifier here.
IP setting
Select Use default IP to automatically configure the IP settings, or
Use Other IP to manually configure IP settings.
IP address
Configure the IP address of the projector here.
Netmask
Configure the subnet mask here.
Gateway
Configure the IP address of the default gateway here.
DNS
Configure the IP address of the DNS server here.
Note:
Wifi & Web browser functions are only available with Q5’s optional dongle.
Downloaded From projector-manual.com Vivitek Manuals
22
Settings
System Options
The system options menu displays the system and firmware information. The Information
menu provides details about the software version.
Play Mode
The play mode menu displays settings for both video and music player options. The
following settings are available:
• Repeat None – The videos or music tracks will not repeat after it is completed.
• Shuffle – The order of videos or music tracks will play in a random order.
• Repeat One – A selected video or music track will continuously repeat after it is
completed.
• Repeat All – All videos or music tracks in a playlist will repeat after all of the files in
the playlist have been completed.
Note:
The Qumi media suite always supplies an output of 1280x800 resolution to the system, so
the OSD displays a resolution of 1280x800 as its received signal. This does not indicate
the actual resolution of the actual multimedia files.
USB Options
The USB Mass Storage option allows you to connect a personal computer with a
supported USB cable to transfer files between the Qumi and personal computer.
Note:
The Qumi media suite only supports input from USB drives.
Downloaded From projector-manual.com Vivitek Manuals
23
AutoPlay Option
Use the AutoPlay Option menu to configure what the Qumi automatically plays when
powered on. The following settings are available when AutoPlay is ON.
• AutoPlay – Turn on or off auto play.
• AutoPlay Type – Automatically play photo or video files when powered on.
• File Path – Automatically play files in the root of USB or local memory.
To use AutoPlay on Qumi:
1. Connect PC to Qumi using a USB cable.
2. Move media files to respective folder (Movies for movie files or Photos for image
files).
To use AutoPlay on USB device:
1. Create Movies or Photos folder in USB drive.
2. Copy media files to respective folder (Movies for movie files or Photos for image
files).
3. Remove USB drive and insert in Qumi.
Note:
1. AutoPlay files on USB drive must be named Movies or Photos for this function to play
media files.
2. Built-in memory for Qumi Q5 is 4GB.
Downloaded From projector-manual.com Vivitek Manuals
24
Chapter 4 On-Screen Display (OSD) Settings
OSD Menu Controls
The Qumi has an On-Screen Display (OSD) settings menu that allows you to make
adjustments and changes to settings, such as display settings and audio settings. There
are 5 menus within the OSD menu:
• Image – Various aspects of the image quality can be adjusted in this menu.
• Computer – Settings for personal computers can be adjusted in this menu.
• Video/Audio – Many settings for video and audio can be adjusted in this menu.
• Installation I – Default language and other settings can be adjusted in this menu.
• Installation II – Factory reset and other settings can be adjusted in this menu.
If the interface is set on AV-IN, HDMI or Universal I/O, the OSD menu can be accessed by
pressing the MENU button on the remote control or keypad.
If the interface is set on the Qumi Media Suite menu, the OSD menu can be accessed by
pressing the MENU button on the remote control or by simultaneously pressing MENU
and
on the keypad.
Note:
If the OSD menu is inactive for 15 seconds, the OSD menu will close.
Navigating the OSD
The remote control cursor buttons or the buttons on the top of the Qumi can be used to
navigate and make changes to the OSD settings.
1. Enter the OSD menu.
2. Press the ◄ or
► button to move
through the 5 menus.
3. Press the ▲ or ▼
button to move the
cursor up and down
within in a menu.
4. Press ◄ or ► to
change the values for
specific settings.
5. Press MENU button
or Exit on the remote
control to close the
OSD or close a
submenu.
Note:
Depending on the video source, not all items in the OSD can be modified. For example,
the Horizontal/Vertical Position items in the Computer menu can only be modified when
the Qumi is connected to a PC through a VGA cable. Settings that are not enabled or that
cannot be modified are gray in color.
Downloaded From projector-manual.com Vivitek Manuals
25
Setting the OSD Language
The language that is displayed in the OSD can be changed. To change the language in
the OSD, perform the following steps:
1. Enter the OSD menu. Press the ◄ or ► button to select the Installation I menu.
2. Press the ▲ or ▼ button until the cursor highlights the Language setting.
3. Press the ◄ or ► button until the language you want is shown in the cursor.
4. Press the EXIT button or MENU button twice to close the OSD.
Downloaded From projector-manual.com Vivitek Manuals
26
OSD Menu Overview
Use the following illustration to quickly find a setting or determine the range for a setting.
Downloaded From projector-manual.com Vivitek Manuals
27
OSD Sub-Menu Overview
Downloaded From projector-manual.com Vivitek Manuals
28
Image Menu
To access the Image menu and adjust the settings, perform the following steps:
1. Enter the OSD menu.
2. Press the ◄ or ► button to select the Image menu.
3. Press the ▲ or ▼ button to move the cursor up or down in the Image menu.
4. Press the ◄ or ► button to change values for each applicable setting.
ITEM
DESCRIPTION
Display Mode
Press the ◄ or ► button to set the Display Mode.
Brilliant Color
Press the ◄ or ► button to adjust the Brilliant Color value.
Brightness
Press the ◄ or ► button to adjust the display brightness.
Contrast
Press the ◄ or ► button to adjust the display contrast.
Sharpness
Press the ◄ or ► button to adjust the display sharpness level.
Gamma
Press the ◄ or ► button to adjust the gamma correction of the
display.
Advanced
Press
to enter the Advanced menu. See Advanced Feature on
page 30.
Reset
Press
to reset all settings to default values.
Note:
The Brilliant Color, Brightness, Contrast, Sharpness, Gamma and Advanced settings are
adjustable only when the Display Mode is set to User and User1.
Downloaded From projector-manual.com Vivitek Manuals
29
Advanced Feature
To access the Advanced menu and adjust the settings, perform the following steps:
1. Enter the OSD menu.
2. Press the ◄ or ► button to select the Image menu.
3. Press the ▲ or ▼ button to move to the Advanced menu and then press
.
4. Press the ▲ or ▼ button to move the cursor up or down in the Advanced menu.
ITEM
DESCRIPTION
Color Space
Press the ◄ or ► button to adjust the color space.
Color Temperature
Press the ◄ or ► button to adjust the color temperature.
Downloaded From projector-manual.com Vivitek Manuals
30
Computer Menu
To access the Computer menu and adjust the settings, perform the following steps:
1. Enter the OSD menu.
2. Press the ◄ or ► button to select the Computer menu.
3. Press the ▲ or ▼ button to move the cursor up or down in the Computer menu.
4. Press the ◄ or ► button to change values for each applicable setting.
ITEM
DESCRIPTION
Horizontal Position
Press the ◄ or ► button to adjust the display position to left or
right.
Vertical Position
Press the ◄ or ► button to adjust the display position to up or
down.
Frequency
Press the ◄ or ► button to adjust the A/D sampling clock.
Tracking
Press the ◄ or ► button to adjust the A/D sampling dot.
Auto Image
Press
to automatically adjustment for phase, tracking, size and
position.
Note:
Items in the Computer menu can only be modified when the Qumi is connected to a PC
through a VGA cable. Settings that are not enabled or that cannot be modified are gray in
color.
Downloaded From projector-manual.com Vivitek Manuals
31
Video/Audio Menu
To access the Video/Audio menu and adjust the settings, perform the following steps:
1. Enter the OSD menu.
2. Press the ◄ or ► button to select the Video/Audio menu.
3. Press the ▲ or ▼ button to move the cursor up and down in the Video/Audio menu.
4. Press the ◄ or ► button to change values for each applicable setting.
ITEM
DESCRIPTION
Video AGC
Press the ◄ or ► button to enable or disable the Automatic Gain
Control for video source.
Video Saturation
Press the ◄ or ► button to adjust the video saturation.
Video Tint
Press the ◄ or ► button to adjust the video tint/hue.
Video Overscan
Press the ◄ or ► button to enable or disable video over scan.
Closed Captioning
Press the ◄ or ► button to enable or disable Closed Captioning.
Audio
Press
to enter the Audio menu. See Audio on page 33.
Reset
Press
to reset all settings to default values.
Note:
Video AGC, Video Saturation, Video Tint and Closed Caption settings are adjustable only
when the source is from composite video. The Video Overscan settings are adjustable
only when the source is from composite, component and HDMI video.
Downloaded From projector-manual.com Vivitek Manuals
32
Audio
To adjust the audio settings, press
to enter the Audio sub menu.
ITEM
DESCRIPTION
Volume
Press the ◄ or ► button to adjust the audio volume.
Mute
Press the ◄ or ► button to turn on or off the speaker.
Audio Input
Press the ◄ or ► button to select audio input.
Downloaded From projector-manual.com Vivitek Manuals
33
Installation I Menu
To access the Installation I menu and adjust the settings, perform the following steps:
1. Enter the OSD menu.
2. Press the ◄ or ► button to select the Installation I menu.
3. Press the ▲ or ▼ button to move the cursor up or down in the Installation I menu.
4. Press the ◄ or ► button to change values for each applicable setting.
ITEM
DESCRIPTION
Language
Press the ◄ or ► button to select a different localization menu.
Blank Screen
Press the ◄ or ► button to select different color to blank the
screen.
Projection
Press the ◄ or ► button to choose from four projection methods:
Front, Rear, Ceiling-Front, Ceiling-Rear.
Aspect Ratio
Press the ◄ or ► button to adjust the video aspect ratio.
Keystone
Press the ◄ or ► button to adjust the display keystone.
Digital Zoom
Press the ◄ or ► button to adjust the Digital Zoom menu.
Advanced
Press
35.
Reset
Press
to reset all settings to default values
(expect Language and Security Lock).
Downloaded From projector-manual.com Vivitek Manuals
to enter the Advanced menu. See Advanced on page
34
Advanced
to enter the Advanced sub menu.
To adjust the advanced settings, press
ITEM
DESCRIPTION
Security Lock
Press the ◄ or ► button to enable or disable security lock
function.
Keypad Lock
Press the ◄ or ► button to enable or disable keypad lock
function.
Presentation Timer
Press
Auto Keystone
Press the ◄ or ► button to enable or disable automatic keystone.
to enter the Presentation menu.
Presentation Timer
To adjust the presentation timer settings, press
menu.
ITEM
to enter the Presentation Timer sub
DESCRIPTION
Timer
Press the ◄ or ► button to enable or disable presentation timer
function.
Timer Period
Press the ◄ or ► button to adjust the display timer period.
Timer Reset
Press
Downloaded From projector-manual.com Vivitek Manuals
to reset presentation timer counter.
35
Installation II Menu
To access the Installation II menu and adjust the settings, perform the following steps:
1. Enter the OSD menu.
2. Press the ◄ or ► button to select the Installation II menu.
3. Press the ▲ or ▼ button to move the cursor up or down in the Installation II menu.
ITEM
DESCRIPTION
Auto Source
Press the ◄ or ► button to enable or disable automatic source
detection.
Auto Power Off (min)
Press the ◄ or ► button to automatically turn the projector lamp
off when there is no signal.
Auto Power On
Press the ◄ or ► button to enable or disable automatic power on.
LED Mode
Press the ◄ or ► button to select the LED mode for higher
brightness or lower brightness to save LED life.
Advanced
Press
to enter the Advanced menu. See Advanced Feature on
page 37.
Factory Reset
Press
Status
Press
to enter the Status menu. See page 40 for more
information on Status.
Downloaded From projector-manual.com Vivitek Manuals
to reset all items to factory preset values.
36
Advanced Feature
To access the Advanced menu and adjust the settings, perform the following steps:
1. Enter the OSD menu.
2. Press the ◄ or ► button to select the Installation II menu.
3. Press the ▲ or ▼ button to select the Advanced menu and then press
.
4. Press the ▲ or ▼ button to move the cursor up or down in the Advanced menu.
5. Press the ◄ or ► button to change values for each applicable setting.
ITEM
DESCRIPTION
OSD Menu Setting
Press
to enter the OSD setting menu. See page 38 for more
information on OSD Menu Setting.
Peripheral Test
Press
to enter the Peripheral Test menu. See page 38 for
more information on Peripheral Test.
3D
Press
to enter the 3D menu. See 3D on page 39.
Press the ◄ or ► button to enable (<1W power consumption) or
disable Low Power Mode.
Low Power Mode
Note:
Enable Low Power Mode to completely power down when
the projector is turned off. Disable Low Power Mode to allow
multimedia functionality when the projector is turned off.
Note:
To use the 3D function, the Play Movie in 3D setting found in your player under the 3D Disc
Menu must be enabled. 3D functionality works when the input source supports 120Hz.
1. The 3D OSD menu item is gray if there is no appropriate 3D source. This is the default setting.
2. When the projector is connected to an appropriate 3D source, the 3D OSD menu item is
enabled for selection.
3. Use 3D glasses to view a 3D image.
4. You need 3D content from a 3D DVD or 3D media file.
5. You need to enable the 3D source (some 3D DVD content may have a 3D on-off selection
feature).
6. You need DLP link 3D or IR 3D shutter glasses. With IR 3D shutter glasses, you need to install
a driver on your PC and connect a USB emitter.
7. The 3D mode of the OSD needs to match the type of glasses (DLP link or IR 3D).
8. Power on the glasses. Glasses normally have a power on-off switch. Each type of glasses has
their own configuration instructions. Please follow the configuration instructions that come with
your glasses to finish the setup process.
Downloaded From projector-manual.com Vivitek Manuals
37
OSD Menu Setting
ITEM
DESCRIPTION
Menu Position
Press the ◄ or ► button to select different OSD location.
Translucent Menu
Press the ◄ or ► button to select OSD background translucent
level.
Menu Display
Press the ◄ or ► button to select OSD timeout delay.
Peripheral Test
ITEM
DESCRIPTION
Remote Control Test
Press
to test the IR remote controller for diagnostic.
Color Test
Press
to select different colors on screen.
Button Test
Press
to test the button on keypad.
Downloaded From projector-manual.com Vivitek Manuals
38
3D
ITEM
DESCRIPTION
3D
Press the ◄ or ► button to select Off, DLP-Link or IR.
3D Sync Invert
Press the ◄ or ► button to turn 3D Sync Invert On or Off.
Factory Reset
To reset all of the menu items to the factory default values (except Language and Security
Lock), perform the following steps:
1. Press the ▲ or ▼ button to move the cursor up or down in the Installation II menu.
2. Select the Factory Reset sub menu.
3. Press
.
Downloaded From projector-manual.com Vivitek Manuals
39
Status
To see the status of the Qumi, perform the following steps:
1. Press the ▲ or ▼ button to move the cursor up or down in the Installation II menu.
2. Select the Installation II sub menu.
3. Press
to enter the Status sub menu.
ITEM
DESCRIPTION
Active Source
Displays the activated source.
Video Information
Displays resolution/video information for RGB source and color
standard for Video source.
LED Hours
LED use information is displayed (in hours). Eco and Normal
counters are separated.
Downloaded From projector-manual.com Vivitek Manuals
40
Chapter 5 Taking Care of Your Qumi
Cleaning the Qumi
Cleaning the Qumi to remove dust and grime will help provide trouble-free operation.
Warning:
1. The Qumi should be turned off and unplugged before cleaning. Failure to do so may
result in injury or damage to the system.
2. Use only a dampened cloth when cleaning. Do not allow water to enter the ventilation
openings on the Qumi.
3. If a small amount of water gets into the interior of the Qumi while cleaning, unplug the
Qumi and set in a well ventilated area for several hours before using.
4. If a large amount of water gets into the interior of the Qumi when cleaning, unplug the
Qumi and have it serviced.
Cleaning the Lens
Optical lens cleaning solutions can be purchased from most camera and other retail
stores. To clean the Qumi lens, perform the following steps:
1. Apply a small amount of the optic lens cleaning solution to a clean and soft cloth. (Do
not apply the cleaning solution directly to the lens.)
2. Gently wipe the lens in a circular motion.
Caution:
1. Do not use abrasive cleaners or solvents.
2. To prevent discoloration or fading, do not allow the cleaning solution to contact the Qumi
case.
Downloaded From projector-manual.com Vivitek Manuals
41
Troubleshooting
Common Problems and Solutions
These guidelines provide tips to deal with problems you may encounter while using the
Qumi. If the problem remains unresolved, contact your dealer for assistance.
The problem sometimes can be as simple as a wire that is not completely connected.
Review the following possible issues before proceeding to the problem-specific solutions.
• Use another electrical device to confirm that the electrical outlet is properly working.
• Make sure that the Qumi is turned on.
• Make sure all connections are securely connected.
• Make sure that the connected device is turned on.
• Make sure that the connected PC is not in suspend or sleep mode.
• Make sure the connected notebook computer is properly configured for an external
display.
Tips for Troubleshooting
In each problem-specific section, perform the steps in the order suggested. Doing so may
help solve the problem more quickly.
In order to avoid replacing non-defective parts, try to find and isolate the problem.
For example, if you replace batteries and the problem remains, put the original batteries
back and move to the next step.
Keep a record of the steps you take when troubleshooting. The information may be useful
for reference when calling technical support or for bringing the Qumi to service personnel.
LED Error Messages
LEFT KEY
BLUE BLINK
3
3
3
3
6
6
8
8
8
ERROR CODE MESSAGES
Over temperature error (Inlet air )
LED over temperature (Red)
LED over temperature (Green)
LED over temperature (Blue)
Fan 1 (Blower) error
Fan 2 (System) error
Red LED Thermistor error
Green LED Thermistor error
Blue LED Thermistor error
RIGHT KEY
BLUE BLINK
OFF
1
2
3
1
2
1
2
3
In the event of an LED error, disconnect the AC power cord and wait for one (1) minute
before restarting the Qumi.
If there is any other situation that isn’t listed in the chart above, please contact your
service center.
Downloaded From projector-manual.com Vivitek Manuals
42
Image Problems
Problem: No image appears on the screen
1. Verify that the settings on your personal computer are properly configured.
2. Turn off all of the equipment and power up the equipment again in the correct order.
Problem: The image is blurred
1. Adjust the Focus on the Qumi.
2. Make sure the Qumi-to-screen distance is within the specified range.
3. Clean the Qumi lens with optical lens cleaning cloth if it is dirty.
Problem: The image is wider at the top or bottom (trapezoid effect)
1. Position the Qumi so that it is perpendicular to the screen as much as possible.
2. Adjust the Keystone settings in the OSD to correct the problem or set Auto Keystone
to On.
Problem: The image is reversed
Check the orientation of the Projection setting in the Installation I menu in the OSD.
Problem: The image is streaked
1. Set the Frequency and Tracking settings on the Computer menu in the OSD to the
default settings.
2. Connect the Qumi to another computer to make sure that the problem is not caused
by a computer’s video card.
Problem: The image is flat with no contrast
Adjust the Contrast setting in the Image menu in the OSD.
Problem: The color of the projected image does not match the source image
Adjust the Color Temperature and Gamma settings in the Image menu in the OSD.
Remote Control Problems
Problem: The Qumi does not respond to the remote control
1. Aim the remote control towards remote sensor on the Qumi.
2. Make sure the path between remote and sensor is not obstructed.
3. Turn off any fluorescent lights in the room.
4. Check to see if the battery polarity is correct.
5. Replace the batteries.
6. Turn off other Infrared-enabled devices in the vicinity.
7. Have the remote control serviced.
Downloaded From projector-manual.com Vivitek Manuals
43
Audio Problems
Problem: There is no sound
1. Adjust the volume of the audio source.
2. Check the audio cable connection.
3. Test the output of the audio source with other speakers.
4. Have the Qumi serviced.
Problem: The sound is distorted
1. Check the audio cable connection.
2. Test the output of the audio source with other speakers.
3. Have the Qumi serviced.
FAQs
1. Does Qumi work with a personal computer, notebook or netbook?
Yes. Use the provided VGA cable or HDMI cable. The Qumi can connect to a PC,
notebook or netbook if they have an appropriate HDMI or VGA port. To play audio,
a separate 3.5mm stereo mini-jack audio cable is required to connect to the Qumi’s
audio port.
2. Is it possible to connect the Qumi to a game console, such as a Microsoft®
Xbox or Sony® PS3?
Yes. The Qumi can be used to display content from an Xbox or PS3 console. This
can be done by connecting the HDMI cable from the game console to the Qumi.
3. Can the Qumi project content from a television?
Watching television content can be done by connecting a cable box, digital set-topbox or satellite receiver because televisions are only able to produce images on its
own screen. For example, if a cable box is used, it can be connected by an HDMI
cable to the Qumi.
4. How can an iPad® connect to the Qumi?
An Apple® iPad to VGA converter cable is required. To connect it to the Qumi,
connect the cable from the iPad to the converter. The VGA converter can then be
connected to the Qumi. The output of the iPad will be properly resized to fit the
Qumi’s native resolution and full screen view.
Downloaded From projector-manual.com Vivitek Manuals
44
5. How are images from a digital camera or a USB storage device displayed?
Images and other content can be displayed by connecting the following devices to
the Qumi:
• USB flash drive, hard drive, card reader
• Digital camera
• Smart phone
• Multimedia storage viewer
Once the devices are connected, images can be displayed by using the Qumi Media
Suite.
6. Which cable is required to video devices to the Qumi?
Video devices can be connected to the Qumi by using an Audio/Video or HDMI cable
if the devices contain the appropriate ports. To play audio, a separate stereo minijack adapter cable (3.5mm mini plug and two RCA plugs). An RCA cable connected
can also be connected to the Qumi.
7. What type of video formats does the Qumi support?
H.264, MPEG-4, VC-1, WMV9, DivX(Xvid), Real Video, AVS and MJPEG.
8. What type of audio formats does the Qumi support?
MP3 and WMA.
9. What type of document formats does the QUMI support?
Microsoft® Office 2003 and Microsoft® Office 2007 (Word, Excel®, PowerPoint®),
Adobe® PDF and text files (txt).
10.What type of photo formats does the QUMI support?
JPEG, PNG and BMP.
11.How long will the LED light source in the Qumi last and can it be replaced?
The Qumi does not use a typical Qumi lamp. It uses a set of Light Emitting
Diodes (LED) to illuminate and project images. LED’s have a greater lifespan than
conventional lamps. Qumi LED’s are estimated to last for approximately 30,000
hours. The lifespan of the LED depends on factors such as brightness, usage,
environmental conditions. LED brightness can decrease over time. The LED module
is not replaceable.
12.Why do I need to re-adjust the focus on my Qumi after it’s powered up?
For the best picture quality, adjustment of the focus ring may be necessary once the
operational temperature has been met.
Vivitek Support Site
Please visit www.vivitekcorp.com for more information, support and product registration.
Downloaded From projector-manual.com Vivitek Manuals
45
Specifications
MODEL
Qumi Q5 Series
RESOLUTION
HD (720p - 1280x800)
PROJECTION DISTANCE
1000mm ~ 3000mm (39.37” ~ 118.11”)
PROJECTION SCREEN SIZE
(DIAGONAL)
762mm ~ 2286mm (30” ~ 90”)
PROJECTION LENS
Manual focus
THROW RATIO
1.55x
VERTICAL KEYSTONE
CORRECTION
+/- 40 steps
PROJECTION METHODS
Front, Rear, Desktop, Front-Ceiling, Rear-Ceiling
DATA COMPATIBILITY
VGA, SVGA, XGA, SXGA, SXGA+, UXGA, Mac
SDTV/EDTV/ HDTV
480i, 480p, 720p, 1080i, 1080p
VIDEO COMPATIBILITY
HDTV (720p, 1080i/p), NTSC/NTSC 4.43, PAL
(B/G/H/I/M/N/60), SECAM
SAFETY CERTIFICATION
FCC-B, UL, CCC, CE, C-Tick, KC, CB, SASO, NOM,
PCT, RoHS, ICES-003(Canada)
OPERATION TEMPERATURE
5° ~ 35°C
DIMENSIONS (WXHXD)
160.0mm (6.3”) x 102.4mm (4.03”) x 32.3mm (1.27”)
AC INPUT
AC Universal 100 - 240, Typical @ 110VAC (100240)/+-10%
POWER CONSUMPTION
62W
AUDIO SPEAKER
2W mono speaker
VGA (through 24-pin connector) x 1
INPUT TERMINALS
3.5mm AV IN x 1
HDMI™ x 1
USB type A x 1
OUTPUT TERMINALS
3.5mm earphone jack (volume control) x 1
Note:
For questions regarding product specifications, please contact your local distributor.
Downloaded From projector-manual.com Vivitek Manuals
46
Projection Distance vs. Projection Size
Projection Distance and Size Table
IMAGE
DIAGONAL
(MM/INCHES)
IMAGE
WIDTH
(MM/INCHES)
IMAGE HIGH
(MM/INCHES)
PROJECTION
DISTANCE
(MM/INCHES)
OFFSET-A
(MM/INCHES)
762/30
646/25.43
404/15.91
1000/39.37
10/0.40
1016/40
862/33.94
538/21.18
1340/52.76
13/0.51
1143/45
969/38.15
606/23.86
1500/59.06
15/0.59
1270/50
1077/42.40
673/26.50
1670/65.75
17/0.66
1524/60
1292/50.87
808/31.81
2000/78.74
20/0.79
1778/70
1508/59.37
942/37.09
2340/92.13
24/0.92
2032/80
1723/67.83
1077/42.40
2670/105.12
27/1.06
2286/90
1939/76.34
1212/47.72
3000/118.11
30/1.18
Downloaded From projector-manual.com Vivitek Manuals
47
Timing Mode Table
SIGNAL
RESOLUTION
H-SYNC V-SYNC COMPOSITE /
COMPONENT RGB DVI/HDMI
(KHZ)
(HZ)
S-VIDEO
15.734
60.0
O
—
—
—
NTSC
—
PAL/SECAM
—
15.625
50.0
O
—
—
—
720 x 400
37.9
85.0
—
—
O
O
800 x 600
31.5
60.0
—
—
O
O
800 x 600
37.9
72.0
—
—
O
O
800 x 600
37.5
75.0
—
—
O
O
640 x 480
43.3
85.0
—
—
O
O
800 x 600
35.2
56.0
—
—
O
O
800 x 600
37.9
60.0
—
—
O
O
800 x 600
48.1
72.0
—
—
O
O
800 x 600
46.9
75.0
—
—
O
O
VESA
Apple® Mac
SDTV
EDTV
HDTV
800 x 600
53.7
85.0
—
—
O
O
1024 x 768
48.4
60.0
—
—
O
O
1024 x 768
56.5
70.0
—
—
O
O
1024 x 768
60.0
75.0
—
—
O
O
1024 x 768
68.7
85.0
—
—
O
O
1280 x 800
49.7
59.8
—
—
O
O
1280 x 800
62.8
74.9
—
—
O
O
1280 x 800
71.6
84.8
—
—
O
O
1280 x 1024
63.98
60.0
—
—
O
O
1280 x 1024
79.98
75.0
—
O
O
1280 x 960
60.0
60.0
—
—
O
O
—
1280 x 960
85.9
85.0
—
—
O
O
1400 x 1050
65.3
60.0
—
—
O
O
1440 x 900
70.6
75.0
—
—
O
O
1440 x 900
55.6
60.0
—
—
O
O
640 x 480
35.0
66.68
—
—
O
O
832 x 624
49.725
74.55
—
—
O
O
1024 x 768
60.24
75.0
—
—
O
O
1152 x 870
68.68
75.06
—
—
O
O
480i
15.734
60.0
—
O
—
O
576i
15.625
50.0
—
O
—
O
480p
31.469
60.0
—
O
—
O
576p
31.25
50.0
—
O
—
O
720p
37.5
50.0
—
O
—
O
720p
45.0
60.0
—
O
—
O
1080i
33.8
60.0
—
O
—
O
1080i
28.1
50.0
—
O
—
O
1080p
67.5
60.0
—
O
—
O
1080p
56.3
50.0
—
O
—
O
O: Frequency supported
—: Frequency not supported
*: Displayable level
Downloaded From projector-manual.com Vivitek Manuals
48
Qumi Dimensions
102.4mm
(4.03”)
160.0mm
(6.3”)
32.3mm
(1.27″
)
160.0mm
(6.3”)
Downloaded From projector-manual.com Vivitek Manuals
49
Regulatory Compliance
FCC Warning
This equipment has been tested and found to comply with the limits for a Class B digital
device pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to correct the
interference at his/her own expense.
Changes or modifications not expressly approved by the parties responsible for
compliance could void the user’s authority to operate the equipment.
Canada
This class B digital apparatus complies with Canadian ICES-003.
Safety Certifications
FCC-B, UL, CCC, CE, C-Tick, KC, CB, SASO, NOM, PCT, RoHS, ICES-003 (Canada)
Disposal and Recycling
This product may contain other electronic waste that can be hazardous if not disposed of
properly. Recycle or dispose in accordance with local, state, or federal Laws. For more
information, contact the Electronic Industries Alliance at www.eiae.org.
Downloaded From projector-manual.com Vivitek Manuals
50
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement