7 APPENDIX
7.1
MAINTENANCE
No.
7
7
Item Name
1
Hanger
2
Wireless Receiver
3
Top cover
4
Fix board of wireless Receiver.
5
6
Plastic cover 1 for fixing lens.
Lens.
7
Plastic cover 2 for fixing lens.
8
Fixed board for zoom
9
Connecting bracket for zoom.
10
Zooming supporter
11
Zooming pillar
12
Light Guid Bart
13
light barrier.
14
Body cover A
15
Arm
16
Lithium battery
17
Foam pad.
18
Lithium battery holder.
19
20
USER MANUAL
4X10W RGBW 4 IN 1
Led Wireless Battery Zoom Light
Wireless receiver board.
21
Driver board
.Display board.
22
Recharge socket A.
23
Bearer for recharge socket A
24
25
PCB holder.
Button of display board
26
Full-featured control panel.
27
Foot.
28
Power switch.
29
Body cover B.
30
Cooling aluminum.
31
Led board.
32
Zooming nut.
33
Zooming screw.
34
35
Connector for lens
Fixed board for LED charge indicator.
36
LED charge indicato.
Please Read Over This Manual Before Operating The Light Fixture
T
ABLE OF CONTENTS
6.3 CHARGER SPECIFICATIONS
Voltage: AC100-240V, 50/60Hz
Output: DC24V, 3A
PART 1 PRODUCT SPECIFICATIONS............................................1.
1.1--TECHNICAL SPECIFICATIONS.....................................................1.
1.2--DIMENSIONS...............................................................................1.
1.3--SAFETY WARNING......................................................................2.
1、Charger +ve
2、Charger -ve
PART 2 INSTALLATION................................................................3.
2
1
2.1-- OPERATING POSITION ........................................... .....................3.
2.2--CHARGING INPUT.......................................................... ........... ...3.
2.3--FUNCTION OPERATION............................................. .. . ..............4.
2.4--OTHER OPERATIONS................................................ .. . ..............4.
PART 3 USING THE MENU.......................................... ..................5.
3.1-- BASIC ..........................................................................................5.
3.2-- MENU ..........................................................................................5.
3.3--EDIT STATIC COLOUR..................................................................6.
3.4--ACTIVATING AUTO PROGRAMS...................................................6.
3.5--DMX512 SETTINGS......................................................................6.
3.6--RUN MODE..................................................................................6.
3.7--PERSONALITY............................................................................7.
3.8--SPECIAL SETTINGS....................................................................7.
3.9--EDITING CUSTOM PROGRAMS...................................................7.
3.10--WHITES CALIBRATION........................................................... ..8.
3.11--RGB CALIBRATION...................................................................8.
3.12-- WDMX SETTINGS. .............................................................. .....8
6.4 FLIGHTCASE SPECIFICATIONS
Voltage: AC100-240V, 50,60Hz
Rated Power: 300W
Weight: 21KG
Dimensions: 730 x 400 x 520mm
PART 4 USING DMX512 CONTROLLER.........................................9.
4.1--BASIC ADDRESSING ................................................................. 9.
4.2--CHANNEL ASSIGNMENT............................................................ 9.
PART 5 EASYPLAY REMOMTE CONTROL....................................15 .
5.1--KEY FUNCTIONS .................. .................................................15.
5.2--STATIC CONTROLS................................................................ 15.
5.3--EFFECT CONTROLS...............................................................15.
5.4-- COLOR CONTROLS. .................................................................15
6.5 IMPORTANT FACTS:
HOW TO CARE FOR YOUR BATTERY!
CHARGING
DO NOT CHARGE FOR MORE THAN 24HRS
RECHARGE WITHIN 3 DAYS OF USE
CHARGE WITH FLIGHTCASE OPEN
STORING
STORE WITH FULL LOAD
TURN OFF AT BASE WHEN STORING FOR MORE THAN 7 DAYS
STORE IN AN UPRIGHT POSITION
PART 6 BATTERY CHARGING......................................................16 .
PART 7 APPENDIX........................................................................17 .
7.1--MAINTENANCE.........................................................................17
·1 7·
6 BATTERY CHARGING
1 PRODUCT SPECIFICATIONS
6.1 BATTERY SPECIFICATIONS:
Type of bettery:Lithium Battery
Voltage: 24V
Storage Capacity: 8800mA
Charge Time: 8 hrs
Discharge Time: 8hrs (in fixture at full output)
Weight: 1.2Kg
Dimensions:135X65X76mm
1.1
TECHNICAL SPECIFICATIONS
LED MODULE
LED MODULE:
Voltage
Zoom Range
Power
Type of bettery
IP Rating
Balck Red
Operation Temperature
4pcsx10W(RGBW 4 in 1 LED)
24VDC
7~60º
40W
Lithium Battery
IP 44
0℃~35℃(operating)
0℃~35℃(startup)
y
r
e
tt
a
B
Dimensions
Weight
1.2
270x160x160mm
4.5Kg
DIMENSIONS
6.2 SPECIAL CONSIDERATIONS :
Charging
Do not charge for more than 24 hours
Always charge with flightcase open
It is recommended to charge at a temperature between 0℃ to 35℃
Always recharge within 3 days of use
Always charge with supplied charger
Operation
Recommended ambient temperature is between 0℃ to 35℃
Always use fixture in a vertical or near-vertical position (<30deg. from vertical)
Do not operate in a sealed enclosure with insufficient air flow
Storage
Always store at a temperature below 35℃ (below 25℃ is best)
Always store in a vertical position
Always store fully charged
It is important to carry out one full discharge and charge cycle every 3 months
Always use the battery switch when storing for longer than 7 days
Store in a dry environment away from direct sunlight
Maintenance
Always switch off the battery switch when carrying out maintenance
Do not allow battery contacts come into contact with fixture housing
Do not link the positive and negative terminals in any way
·16·
·1·
1.3
SAFETY WARNING
IMPORTANT
【ALWAYS READ THE USER MANUAL BEFORE OPERATION. 】
【PLEASE CONFIRM THAT THE POWER SUPPLY STATED ON THE PRODUCT IS THE
SAME AS THE MAINS POWER SUPPLY IN YOUR AREA.】
● This product must be installed by a qualified professional .
● Always operate the equipment as described in the user manual .
●A minimum distance of 0.5m must be maintained between the equipment and combustible surface.
● The product must always be placed in a well ventilated area.
● Always make sure that the equipment is installed securely.
● Do not stand close to the equipment and stare directly into the LED light source.
● Always disconnect the power supply before attempting maintenance.
● Always make sure that the supporting structure is solid and can support the combined weight of
●
●
the
products.
The earth wire must always be connected to the ground.
Do not touch the power cables if your hands are wet.
ATTENTION
● Do not operate in a sealed enclosure with insufficient air flow
● Do not operate in an environment with temperatures in excess of 45deg. C .
● Do not operate store in close proximity to source of fire.
● Always charge with supplied charger
● Do not charge for more than 24 hours
● Always turn off battery storage switch when storing for longer than 7 days
● Always store with full load
● Always charge with flightcase open
● Always carry out one full discharge and charge cycle every 3 months
● Always store in a dry environment away from direct sunlight
1
4
1
4
2
5
2
5
3
6
3
6
2 GETTING STARTED
2.1 OPERATING POSITION
● This lighting fixture is powered using a Lithium Battery which requires that the
correct product orientation is always maintained for operation.
·2·
·1 5·
ZOOM RANGE (7~60º)
AR2.S
CHANNEL
FUNCTION
VALUE
1
0
255
Zoom Range 60º
DIMMER
2
0
255
RED
3
0
255
GREEN
4
0
255
BLUE
5
0
255
WHITE
6
0
255
STROBE
Zoom Range 7º
HSV
CHANNEL
FUNCTION
VALUE
1
0
255
HUE
2
0
255
SATURATION
3
0
255
VALUE
5 OPERATION WITH WIRELESS DMX
2.2 BATTERY CHARGING INPUT
WIRELESS RECEIVING ANTENNA
Charger -ve
Charger +ve
1
2
Battery charging input
W-DMX TRANSMITTER
5.1
When using this lighting fixture with W-DMX receiver installed inside,
the fixture may be placed at a range of 300m from W-DMX transmitter
5.2 Select DMX from the <RUN> menu.
5.3 Select ACTI from the <WDMX> menu and proceed to turn ON the WDMX.
If the WDMX receiver card is already paired with a WDMX transmitter then
the fixture is ready for receiving DMX signal. If the WDMX receiver card needs
to be paired with a new WDMX transmitter, select YES from the <WDMX >/<REST>
menu. The green signal indicator LED will not show which confirms that WDMX receiver
card is unpaired and ready for new pairing.。
·1 4·
BATTERY CHARGING INPUT
● Do not connect DMX
● Only for specified charger(in flight case or single charger)
● Do not connect any other data cables
·3·
ARC.1
2.3 GENERAL OPERATION
ON/OFF Switch
CHANNEL
Zoom Knob
IR Receiver
Power Status
GREEN: >70%
YELLOW: >20%
RED: EMPTY
VALUE
FUNCTION
1
0
255
RED
2
0
255
GREEN
3
0
255
BLUE
ARR.D
CHANNEL
FUNCTION
VALUE
1
0
255
MASTER DIMMER
2
0
255
RED
3
0
255
GREEN
4
0
255
BLUE
2.3.1 POWER STATUS
● During operation, the Power Statuas indicator will indicate the amount of battery power that is remaining.
The battery should be recharged when RED is shown.
● During charging, the Power Statuas indicator will indicate the amount of battery power that has been
charged to the battery. When the battery is fully charged the GREEN LED will immediately switch off.
● In the event that the battery storage switch is OFF, it is not possible to charge the battery. In this case, when
the mains power is connected to the fixture, the Power Statuas indicator will show GREEN for 30 seconds and
then fade out. This shows that electrical contact has been made between the lighting fixture and the battery
charging system. The Battery Storage Swicth must be ON in order to charge the battery.
● In order to check the current status of the battery, the battery charging system should be turned OFF. The
fixture can then be turned ON using the EVENT ON/OFF button and the Power Statuas can be checked.
ARC2
2.3.2 ON/OFF SWITCH
● Press the SWITCH ON/OFF button for 3 seconds to turn on/off lighting fixture (when BATTERY SWITCH is ON)
● SWITCH ON/OFF button indicator LED when showing constant RED indicates lighting fixture is power ON ( when slowly
CHANNEL
flashing indicates that DMX data is successfully received)
2.4 OTHER OPERATIONS
1 POWER ON/OFF
FUNCTION
VALUE
1
0
255
RED
2
0
255
GREEN
3
0
255
BLUE
4
0
255
WHITE
2 BATTERY CHARGING INPUT
3 DISPLAY
AR2.D
CHANNEL
2.4.1 ANTENNA RELEASE
● When releasing support antenna with hand
2.4.2 BATTERY SWITCH
● ON for operation/charging
● OFF for storage (>7 days)
● OFF for maintenance
● Always use the Battery Switch when storing for more than 7 days
● Battery Switch must be ON for operation and charging
·4·
FUNCTION
VALUE
1
0
255
DIMMER
2
0
255
RED
3
0
255
GREEN
4
0
255
BLUE
5
0
255
WHITE
·1 3·
CHANNEL
11
VALUE
FUNCTION
221
225
W H I T E 5:5 6 0 0 K
226
230
W H I T E 6:5 9 0 0 K
231
235
W H I T E 7:6 5 0 0 K
236
240
W H I T E 8:7 2 0 0 K
241
245
W H I T E 9:8 0 0 0 K
246
250
W H I T E 1 0:8 5 0 0 K
251
255
W H I T E 1 1:1 0 0 0 0 K
3 USING THE MENU
3.1 BASIC
The LED fixture is mounted with a LCD display
And 4 control buttons.
MENU ENTER
MENU
ENTER
STROBE
0
12
11
10
NO FUNCTION
scroll through the main menu or return to the main menu
enter the currently selected menu or confirm the current function value
scroll 'UP' through the menu list or increase the value of the current function
scroll 'DOWN' through the menu list or decrease the value of the current function
NO FUNCTION
0
40
41
50
51
60
AUTO 2
61
70
AUTO 3
71
80
AUTO 4
AUTO 1
3.2
MENU
MENU
STAT
AUTO
90
91
100 AUTO 6
101
110 AUTO 7
111
120 AUTO 8
121
130 AUTO 9
131
140 AUTO 10
141
150 PR.01
151
160 PR.02
161
170
R.(0~255)
G.(0~255)
B.(0~255)
B.(0~255)
S.(0~20)
AT.01
PR.10
RUN
DMX
SLAV
ADDR
D.(001~512)
PERS
TOUR
Tr16
ARC.1
AR1.D
ARC.2
AR2.D
AR2.S
HSV
180
PR.03
181
190
PR.05
200
PR.06
201
210
PR.07
211
220
PR.08
221
230
PR.09
231
255
PR.10
0
255
SET
KEY
UPLD
REST
COLOR
PR.04
191
0
DIM
CURV
DERR
ON
OFF
PASS
PASS
DIM3
O
FF
OFF
Cv1
Cv2
Cv3
O
FF
SAVE
BLAK
SLCK
O
FF
OFF
ON
When using CH10,AUTO01-AUTO10, this function activated
STRB
O
FF
SPEC
CLAS
DIMMER SPEED
LIFE
LONG
NORM
PR.01
SC.01
9
PRESET DIMMER SPEED FROM DISPLAY MENU
10
29
LINEAR DIMMER
30
69
NON LINEAR DIMMER 1(fastest)
70
129
NON LINEAR DIMMER 2
130
189
NON LINEAR DIMMER 3
190
255
NON LINEAR DIMMER 4(slowest)
·12·
PR.10
SEND
REST
OFF
RGBW
UC
DIM4
DIM1
DIM2
AUTO SPEED ADJUSTMENT
EDIT
15
RED
GREN
BLUE
WHITE
STRB
AT.10
PR.01
AUTO 5
81
171
14
DOWN
2 5 5 1~20Hz
AUTO
13
UP
SC.30
·5·
RED
GREN
BLUE
WHITE
STRB
TIME
FADE
R.(0~255)
G.(0~255)
B.(0~255)
W.(0~255)
S.(0~20)
T.(0~255)
F.(0~255)
END
END
CAL
****
CAL1
WH.01
WH.11
WDMX
ACTI
REST
3.3
CAL2
RGB.W
ON
OFF
NO
YES
OK
RED
GREN
BLUE
R.(0~255)
G.(0~255)
B.(0~255)
RED
GREN
BLUE
R.(0~255)
G.(0~255)
B.(0~255)
EDIT STATIC COLOUR
MENU
STAT
Red
Green
Blue
(0~255)
(0~255)
(0~255)
White
Strob
(0~255)
(0~20)
【STATIC COLOUR】
AUTO
VALUE
1
0
255
MASTER DIMMER
2
0
255
MASTER DIMMER FINE
3
0
255
RED
4
0
255
RED FINE
255
GREEN
6
0
255
GREEN FINE
7
0
255
BLUE
8
0
255
BLUE FINE
AT.10
PR.01
9
0
255
WHITE
PR.10
10
0
255
WHITE FINE
0
10
11
30
RED100%/GREEN UP/BLUE0%
31
50
RED DOWN/GREEN 100%/BLUE0%
51
70
RED 0%/GREEN 100%/BLUE UP
71
90
RED 0%/GREEN DOWN/BLUE 100%
AT.01
【AUTO】
COLOR MACRO&WHITE
● Select the target【AUTO】 program and press【ENTER】.
● Programs【AT.01】to【AT.10】are fully pre-programmed and will not be
altered by changes in【EDIT 】mode.
● Programs 【PR.01】to【PR.10】are fully pre-programmed and can be edited
in 【EDIT 】mode.
3.5
DMX512 SETTINGS
MENU
DMX
D(001~512)
【DMX】
● Enter the【DMX】mode to set the DMX ADDRESS.
3.6
RUN MODE
MENU
FUNCTION
0
ACTIVATING AUTO PROGRAMS
MENU
CHANNEL
5
● Combine 【Red】, 【Green】,【Blue】and【White】 to create an infinite
range of colors (0-255)
● Set the value of the 【Strobe】 (0-20Hz)
3.4
TR16
RUN
DMX
SLAV
【RUN 】
11
NO FUNCTION
91
110
RED UP/GREEN 0%/BLUE100%
111
130
RED100%/GREEN 0%/BLU EDOWN
131
150
RED100%/GREEN UP/BLUE UP
151
170
RED DOWN/GREEN DOWN/BLUE 100%
171
200
·1 1·
RED100%/GREEN 100%P/BLUE100%
201
205
W H I T E 1:3 2 0 0 K
206
210
W H I T E 2:3 4 0 0 K
211
215
W H I T E 3:4 2 0 0 K
216
220
W H I T E 4:4 9 0 0 K
● Enter the【RUN 】mode to set working mode.
● 【DMX】 mode is for using the DMX512 controller to control the fixtures.
● 【SLAV】 mode is for Master -- Slave operation.
·6·
·1 1·
3.7
CHANNEL
6
VALUE
PERSONALITY
FUNCTION
221
225
W H I T E 5:5 6 0 0 K
226
230
W H I T E 6:5 9 0 0 K
231
235
W H I T E 7:6 5 0 0 K
236
240
W H I T E 8:7 2 0 0 K
241
245
W H I T E 9:8 0 0 0 K
246
250
W H I T E 1 0:8 5 0 0 K
251
255
W H I T E 1 1:1 0 0 0 0 K
MENU
【PERSONALITY】
7
11
10
3.8
9
BLOC
SET
KEY
UPLD
REST
COLOR
NO FUNCTION
2 5 5 1~20Hz
DIM
NO FUNCTION
ON
OFF
PASS
PASS
41
50
51
60
AUTO 2
DERR
61
70
AUTO 3
SLCK
O
FF
OFF
ON
71
80
AUTO 4
STRB
81
90
AUTO 5
O
FF
SPEC
CLAS
91
100 AUTO 6
AUTO 1
101
110 AUTO 7
111
120 AUTO 8
121
130 AUTO 9
131
140 AUTO 10
141
150 PR.01
151
160 PR.02
161
170
PR.03
171
180
PR.04
181
190
PR.05
191
200
PR.06
201
210
PR.07
211
220
PR.08
221
230
PR.09
231
255
PR.10
AUTO SPEED ADJUSTMENT
0
255
When using CH10,AUTO01-AUTO10, this function activated
DIMMER SPEED
9
PRESET DIMMER SPEED FROM DISPLAY MENU
10
29
LINEAR DIMMER
30
69
NON LINEAR DIMMER 1(fastest)
70
129
NON LINEAR DIMMER 2
130
189
NON LINEAR DIMMER 3
190
255
NON LINEAR DIMMER 4(slowest)
·1 0·
LIFE
END
END
DIM3
O
FF
OFF
Cv1
Cv2
40
CURV
SEND
REST
OFF
RGBW
UC
DIM4
DIM1
DIM2
0
0
10
HSV
SPECIAL SETTINGS
AUTO
8
TOUR
ARC.1
AR1.D
● Enter the【PERSONALITY】mode to select DMX mode:【TOUR】,【TR16】,
【ARC.1】,【AR1.D】,【ARC.2】,【AR2.D】,【AR2.S】or【HSV】
STROBE
0
PERS
Cv3
O
FF
SAVE
BLAK
LONG
NORM
【SETTING】
【KEY】
● Enter the【KEY】mode to select whether the access password is on or off.
● When the fixture is set as PASS 【ON】, after 30 seconds or turn on the fixture
next time, the fixture will need an access password to enter the display menu
control.
Note: The factory access password is【UP】+【DOWN】+【UP】+【DOWN】,
then press 【ENTER】to confirm the access.
● Select【UPLD】to upload the custom programs from the current MASTER unit to
the SLAVE units.
● In order to activate the upload function the password must be entered.
● Password is the same as the main access password.
● When uploading the MASTER and SLAVE units will display YELLOW.
● If an error occurs when uploading the MASTER and/or SLAVE units will display RED.
● On successful uploading of the custom programs the MASTER and SLAVE units
will display GREEN.
● In order to reset custom modes to default values select 【REST】.
● 【COLOR】 is for activate/unactivate the color calibration functions.
When 【RGBW】is selected, on RGBW = 255,255,255, 255 the color is displayed as calibrated
in CAL2 -- RGBW. When【COLOR】 is set 【OFF】, on RGBW = 255,255,255,255 the RGBW
values are not adjusted and the output is most powerful.
When [UC] is selected, the RGB output are adjusted to a standard preset universal color
which balances fixtures from different generations..
● 【LIFE】BATTERY LIFE ; LONG for extended battery operation (approx. 10hrs), NORM
for standard battery operation (approx. 8hrs).
·7·
3.9
EDITING CUSTOM PROGRAMS
MENU
EDIT
PR.01
SC.01
PR.10
SC.30
Red
Green
Blue
White
Strobe
Time
Fade
(0~255)
(0~255)
(0~255)
(0~255)
(0~20)
(0~255)
(0~255)
4 USING A DMX512 CONTROLLER
4.1
● Set the DMX512 address in the【DMX】menu.
● It is possible to have the same DMX address or independent
addresses for each fixture.
【EDIT CUSTOM】
● Enter the【EDIT 】mode to edit the custom programs【PR.01】to 【PR.10】.
● Each custom program has 30 steps that can be edited.
● Each step allows the creation of a scene using RED 【Red】, GREEN 【Green】,
BLUE 【Blue】, STROBE 【Strobe】, TIME【Time】 & FADE
【Fade】.
BASIC ADDRESSING
4.2
CHANNEL ASSIGNMENT
● Note:This product has six DMX512 channel configurations:【TOUR】,
【TR16】,【ARC . 1】, 【AR1 .D】,【ARC .2】,【AR2.D】,【AR2.S】
and【HVS】.
TOUR
3.10 WHITES CALIBRATION
MENU
CAL
CHANNEL
CAL1
WT01
WT02
Red
Green
Blue
(0~255)
(0~255)
(0~255)
VALUE
1
0
255
2
0
255
RGBW
Red
Green
Blue
(0~255)
(0~255)
(0~255)
3
0
255
【CAL1】
● Enter the 【CAL1】to select white color of different color temperature.
● There are 11 pre-programmed White colors can be edited by using 【Red】,
【Green】&【Blue】.
4
0
255
5
0
255
0
【CAL2】
● Enter the 【CAL2】to adjust the RGB parameter to make different whites.
● When the new setting is activated, the DMX controller choose
RGB = 255,255,255, the white color will be made by the actual RGB values on
the 【CAL2】.
3.12
WDMX SETTINGS
MENU
WDMX
ON
OFF
NO
YES
ACTI
REST
OK
6
● Enter 【WDMX】menu to change WDMX settings
● Enter the 【ACTI】 menu to turn ON/OFF WDMX functionality
● Enter the【REST】 menu to reset the WDMX pairing (note that only when
the WDMX receiver card is reset can it be paired with a new WDMX
transmitter card)
·8·
5
(or STEP TIME when CUS.01-CUS.10 in CH10 is activated)
GREEN
(or FADE TIME when CUS.01-CUS.10 in CH10 is activated)
BLUE
White
NO FUNCTION
11
30
RED100%/GREEN UP/BLUE0%
31
50
RED DOWN/GREEN 100%/BLUE0%
51
70
RED 0%/GREEN 100%/BLUE UP
71
90
RED 0%/GREEN DOWN/BLUE 100%
91
110
RED UP/GREEN 0%/BLUE100%
111
130
RED100%/GREEN 0%/BLU EDOWN
131
150
RED100%/GREEN UP/BLUE UP
151
170
RED DOWN/GREEN DOWN/BLUE 100%
171
200
RED100%/GREEN 100%P/BLUE100%
201
【WDMX】
MASTER DIMMER
RED
WT11
CAL2
FUNCTION
205
W H I T E 1:3 2 0 0 K
206
210
W H I T E 2:3 4 0 0 K
211
215
W H I T E 3:4 2 0 0 K
216
220
W H I T E 4:4 9 0 0 K
·9·
Download PDF