Alpine i407-WRA-JK 7-Inch Multimedia Receiver Installation Manual

Alpine i407-WRA-JK is designed to provide an enhanced entertainment experience and seamless integration for 2007-2018 Jeep Wrangler JK models. With its compatibility with a range of audio and video sources, you can enjoy your favorite music, videos, and more on the go. The i407-WRA-JK features a user-friendly interface, allowing for easy control and customization of your audio settings.

PDF

Document

Jeep Wrangler i407-WRA-JK 20210811v1 1/18

Jeep Wrangler

i407-WRA-JK

Restyle Installation Manual

Model: Wrangler JK

Model Year: 2007-2018

Jeep

Model

Wrangler JK

Year

2007-2018

* The specified vehicles have been tested and have met compatibility specs at the time of testing. Compatibility is not guaranteed if the manufacturer has made production changes to the listed vehicles above.

Warning: Before you begin wiring, remove the ground wire from the negative terminal of the battery. Failing to do so can lead to electric shock, injury or damage to equipment.

Introduction

Congratulations on purchasing the i407-WRA-JK. This installation manual is designed to take you through the step-by-step installation of the i407-WRA-JK into a 2007-2018 Jeep Wrangler JK. Please familiarize yourself with the owners manual and if you still have additional questions please call 1-800-TECH-101.

Note:

Design and specifications are subject to change without notice for improvement.

To Ensure Safe Use, Always Follow These Precautions

The installation of this product requires specialized skills and experience. We recommend that you have the product installed by an Alpine authorized dealer.

Before you use this product, be sure to carefully read this installation manual and the separate user's manual so that you can use the product correctly. Alpine Electronics bears no responsibility for problems that arise as a result of failure to follow the instructions in the manuals.

This manual includes a number of symbols that are intended to help you use the product safely, to prevent harm to you and others, and to protect against damage to property. These symbols and their meanings are listed below. Make sure you fully understand these symbols before you begin reading the main text.

Explanations of Injury and Damage That May Result from Incorrect Use

Warning

Caution

Ignoring the content marked by this indication and using the product incorrectly is expected to lead to death or serious injury.

Ignoring the content marked by this indication and using the product incorrectly is only expected to lead to injury or property damage.

Types of Precautions

Forbidden

Indicates actions that are forbidden (must not be performed)

Indicates that disassembly is forbidden.

Forbidden

Mandatory

Indicates actions that are mandatory (must be performed)

Marks content that should receive your full attention.

Warning

Do not disassemble or modify the product.

Doing so could lead to an accident, fire, or electric shock.

Store screws and other small objects where children cannot reach them. If one of thse small objects is swallowed, consult with a doctor immediately.

Forbidden

When replacing fuses be sure to

use the fuses with the specified current

rating. Failing to do so could lead to

an accident or fire.

Mandatory Forbidden

Only connect the product to a 12 VDC negative ground car. Failing to do so could lead to an accident or fire.

Mandatory

Before you begin wiring, remove the ground wire from the negative terminal of the battery.

Failing to do so could lead to electric shock or injury.

Do not cut the insulation on a cord and take power from another device. Doing so could lead to fire or electric shock.

Do not install the product in a location where it willl obstruct the driver’s forward view; interfere with the operation of the steering wheel, gear shift, or the like; or pose a threat to passengers. Doing so could lead to an accident or injury.

Forbidden

Jeep Wrangler i407-WRA-JK 20210811v1 2/18

When making a hole in the vehicle body, be careful to avoid damaging pipes, the fuel tank, electrical wiring, and the like. This kind of damage could lead to an accident or fire.

When installing and grounding the product, do not use any of the bolts or nuts of the steering wheel, brakes, fuel tank, or the like. Doing so could make the brakes stop working or could lead to fire.

Forbidden

Do not install athe product near the passenger-side airbag. Doing so could interfere with the operation of the airbag and lead to an accident or injury.

Forbidden

Bundle cords so that they don’t interfere with driving. Wrapping cords around the steering wheel, gearshift, brake pedal, or the like could lead to an accident or damage equipment.

Caution

Connect the product properly according to the instructions. Failing to do so could lead to fire or an accident.

Forbidden

Do not sandwich cords between the seat railing or allow them to touch protrusions. Resulting breaks or shorts could lead to electric shock or fire.

Do not block vents or heat sinks. Doing so could lead to fire or damage equipment.

Use the accessories according to the instructions, and attach them securely. Failing to do so could lead to an accident or damage equipment.

Forbidden

Do not install the product where it may be exposed to water or in a place with high levels of humidity or dust. Doing so could lead to fire or damage equipment.

Forbidden

The installation and wiring of this product requires specialized skills and experience. Have the product installed by an Alpine authorized dealer.

Tools Required

Panel Removing Tool

Wire Cutters

T20 Torx

7mm Sockets

Jeep Wrangler i407-WRA-JK 20210811v1 3/18

#2 Phillips Screwdriver

Extension Ratchet

Digital Multimeter Air Saw

Wire Strippers Pliers

Jeep Wrangler i407-WRA-JK 20210811v1 4/18

Accessory List

Head Unit Box Parts (i407-WRA) iLX-407 Head Unit Round Head Screws M5#8 (4pcs) Video In/Out Harness

Camera/Preout Harness

Aux Power Pig Tail

Side Mounting Brackets L&R Documents

USB Angled Extension Cable

OM QR Card

Alpine

Registration Card

Installation

Manual

Hands Free Microphone iDatalink Maestro Box Parts (ALP-MRR4/ALP-HRN-WRA4)

Maestro Flashing Cable USB

Micro To Full Size

FM/AM Antenna Adapter iDatalink Maestro Module

Main Harness

SiriusXM Radio Antenna Adapter

(only for vehicles with factory

SiriusXM)

OBDII Adapter Cable

Jeep Wrangler i407-WRA-JK 20210811v1 5/18

Programming the iDatalink Maestro Module

INSTALL THE WEBLINK PLUG-IN

Go to:

idatalinkmaestro.com/plugin and follow the installation steps. The

Maestro module must be programmed specifically for each vehicle and radio. Take care to enter the correct vehicle information, factory options, head unit model, and head unit serial number.

The head units serial number is a 9 character alphanumeric value which is found on the head units label, underneath the bar code.

Review the System Requirements before installing.

REGISTER A WEBLINK ACCOUNT

Go to: idatalinkmaestro.com/register and complete the registration process.

A confirmation email will be sent to you requiring validation.

If the plugin is already installed, the caution, “The plugin is already installed” appears. Please skip to step 2.

For existing customers, click log in.

LOG INTO WEBLINK

Go to: idatalinkmaestro.com/login.

Enter your username and password, then click OK.

CONNECT YOUR MAESTRO MODULE

Use your Maestro module to connect to your PC.

PROGRAM YOUR MODULE

Follow the programming steps for your vehicle.

Once Programing is complete “FLASHING

COMPLETED!” will be displayed.

Proceed to the next page to complete installation.

NOTE: If serial number is invalid, Call ADS at

1-866-427-2999 with the serial number.

Jeep Wrangler i407-WRA-JK 20210811v1 6/18

Factory Unit Disassembly Process (2007-2010 Only)

DISCONNECT THE BATTERY BEFORE

CONTINUING. FAILURE TO DO SO WILL

DISABLE MANY FEATURES.

Remove top by releasing 2 rear clips on the back of the top panel and then pull panel forward.

Release 2 clips on the top of the bottom panel. This will expose two 7mm screws. Remove those.

Release 2 clips on the top of the bottom panel. This will expose two 7mm screws. Remove using a 7mm socket with ratchet & extension.

Use panel removal tool to remove dash panel by releasing 6 clips (3 per side)

Extract (4) 7 mm screws and remove the factory radio.

Jeep Wrangler i407-WRA-JK 20210811v1 7/18

Factory Unit Disassembly Process (2011-2017 Only)

DISCONNECT THE BATTERY BEFORE

CONTINUING. FAILURE TO DO SO WILL

DISABLE MANY FEATURES.

Remove the rubber cover from the top center storage area and extract (1) 7mm screw.

Remove the knee cover panel and extract (2) 7mm screws located to the right and left sides of the steering wheel column.

Remove the window switch pod using a panel removing tool and extract (1) 7mm screw.

Left side of steering wheel column.

Remove the dash panel.

Right side of steering wheel column.

Extract (4) 7 mm screws and remove the factory radio.

Use a cutting tool to trim the highlighted area shown below.

Jeep Wrangler i407-WRA-JK 20210811v1 8/18

Installation Instructions

Plug the OBDII connector on to the OBDII port below the driver side dash and run the extension to the radio cavity.

Attach the side brackets using the provided 8mm round head screws.

Mount the microphone as illustrated and run the cable to the radio cavity. You will need to use a T20

Torx to remove the visor. For optimal performance it should be mounted by the rear-view mirror as illustrated.

Run the USB extension cable to an area you want to plug in at (typically the glove box or center console areas), connect the main harness, antenna, and other adapters to the factory harnesses and secure them.

Mount the i407-WRA-JK head unit using the factory 7mm screws and return factory panels to their corresponding place

Jeep Wrangler i407-WRA-JK 20210811v1 9/18

Disconnecting the Uconnect® (only for 2011-2017 vehicles with factory Uconnect®)

Remove the factory climate control panel. It is clipped on and can be removed with a panel removing tool. Extract the (2) 7mm bolts from

Uconnect® module.

Disconnect the 24pin OEM connector.

Secure the Uconnect® module to the original location using the 7mm bolts.

NOTE: Since the factory Uconnect® system is not going to be used you can unplug the 24 pin connector shown in step 2. If Uconnect® module is not disconnected the Uconnect® system will stay paired with previously paired phones. The user’s phone may connect to both Bluetooth devices simultaneously resulting in unpredictable and potentially distracting behavior.

Connecting A SiriusXM Module (Sold Separately)

There is no way to integrate the factory SiriusXM tuner. Once the radio is removed, the factory SiriusXM is removed. As the title states, SiriusXM requires a tuner sold separately. This diagram shows how to integrate the antenna connection. For vehicles with factory SiriusXM connect the adapter to the factory SiriusXM antenna in the radio cavity. The factory SiriusXM antenna is located on the passenger side B-pillar. For vehicles without factory SiriusXM use the antenna that is included with the SXV300 SiriusXM Tuner.

VIDEO IN/OUT

USB

HDMI IN

ANTENNA

CAN I/F

CAMERA/PRE OUT

MIC SWC SXM/DAB

POWER

Jeep Wrangler i407-WRA-JK 20210811v1 10/18

i407-WRA-JK Wiring Diagram

To OBDII Connector

To Vehicle Connectors

Power/Speaker

16-pin Green Connector

Antenna

Adapter

AMPLIFIED VEHICLES

WARNING!

Failure to follow this procedure will result in no audio from Navigation and

Bluetooth sources.

Not

Used

Not

Used

10-Pin Chime 18-Pin

Red

Not

Used

Reset

Button

Rear

Front

For factory amplified vehicles switch the speaker connectors, front to rear and rear to front.

See page 12 for HDMI connection info

USB Extension iLX-407

USB

Aux Input Cable

(Sold Separate 3rd Party Cable)

Audio Only No Video

(White)

(Red)

(Yellow)

Video (Yellow)

Ground

Audio R (Red)

Audio L (White)

Aux Video Input

This is the only way to get RCA video into the head unit.

HDMI IN

VIDEO IN/OUT iDatalink MAESTRO Module

MIC SWC SXM/DAB

ANTENNA CAN I/F

3-Pin 4-Pin 10-Pin 3-Pin 4-Pin

CAMERA/PRE OUT POWER

Not

Used

Blue

Not

Used

Power Harness

Aux Input

MANUAL TRANSMISSION VEHICLES

White/Gray Manual Transmission Reverse Input

For manual transmission vehicles ONLY . Connect the

White/Gray wire to the White/Gray wire located on the passenger side kick panel.

Blue/White Amp Turn-on

Blue Power Antenna

Yellow -12V+

Red - Acc 12V+

Black - Ground

Rear View Camera

AUX Power

3-pin Black Connector

Rear View Camera

6-pin Black Connector

If using

HCE-TCAM1-WRA see page 15

WARNING!

The use of this connection is intended for Alpine

HCE-TCAM1-WRA rear view camera ONLY.

CAN/IF

Rear Camera

Input

Front Camera

Input

Optional Rear Camera Optional Front Camera

Jeep Wrangler i407-WRA-JK 20210811v1 11/18

Component Locations

IMPORTANT: These would be the typical locations used to install the separate components. The Maestro module and SiriusXM tuner (sold separately) would not have restrictions and could be moved based on the installers discretion.

Add-on Microphone iDatalink Maestro Module

SiriusXM Tuner

(Sold Separately)

Jeep

SINCE 1941

Jeep

Connection Of An External Amplifier

ANTENNA

VIDEO IN/OUT

USB

HDMI IN

CAN I/F

CAMERA/PRE OUT

MIC SWC SXM/DAB

POWER

SUBW

Note: If the sub output is used it will need to be turned on the the sound settings.

FRONT OUT

(Blue/White) REMOTE

(Red)

(White)

(Red)

(White)

(Red)

REAR OUT

(White)

RCA Extension Cable (sold separately)

Remote Turn-On Lead (Blue/White)

Subwoofer RCA Connectors

Front Output RCA Connectors

Rear Output RCA Connectors

REMOTE ON

(Blue/White)

REMOTE ON

(Blue/White)

Amplifier for subwoofer

(sold separately)

To subwoofer input terminal

Subwoofer

To front input terminal

Amplifier 4 ch

(sold separately)

To rear input terminal

Front speaker

Rear speaker

i407-WRA-JK HDMI Usage With An iPhone

For all phones the USB power source needs to be a 2A source. This will require a separate USB power source to be installed in the vehicle.

ANTENNA

Jeep Wrangler i407-WRA-JK 20210811v1 12/18

Do not use the head unit’s

USB to power HDMI devices.

This port is meant for Apple

CarPlay, Android Auto, and

USB flash drives.

Do not use the head unit’s

USB to power HDMI devices.

This port is meant for Apple

CarPlay, Android Auto, and

HDMI IN iLX-407 Source Unit

VIDEO IN/OUT iLX-407 Source Unit

VIDEO IN/OUT

USB

CAN I/F

HDMI IN

MIC SWC

SXM/DAB

CAN I/F

CAMERA/PRE OUT

Lightning To HDMI adapter needs to be purchased from Apple.

Third party adapters may not work

Lightning To HDMI adapter needs to be purchased from Apple.

Third party adapters may not work

MIC SWC SXM/DAB

POWER iPhone

i407-WRA-JK HDMI Usage With An Android Phone

For all phones the USB power source needs to be a 2A source. This will require a separate USB power source to be installed in the vehicle.

be a 2A source. This will require a separate USB power source to be installed in the vehicle.

ANTENNA

Some Android phones do not have HDMI adapters. If they have the ability to cast the easiest way to connect is with a Miracast adapter (for example a Roku Stick or Amazon Firestick). have the ability to cast the easiest way to connect is with a Miracast adapter (for example a Roku Stick or Amazon Firestick).

Do not use the head unit’s

USB to power HDMI devices.

This port is meant for Apple

CarPlay, Android Auto, and

USB flash drives.

USB to power HDMI devices.

This port is meant for Apple

CarPlay, Android Auto, and iLX-407 Source Unit

VIDEO IN/OUT

HDMI IN iLX-407 Source Unit

VIDEO IN/OUT

USB

CAN I/F

HDMI IN

MIC SWC

SXM/DAB

CAN I/F

CAMERA/PRE OUT

MIC SWC

Android Phone

SXM/DAB

POWER

Android Phone

Some Android phones may have a HDMI adapter. That would be sold separately by the phone manufacturer. Third party adapters will not work.

have a HDMI adapter. That would be sold separately by the phone manufacturer. Third party adapters will not work.

i407-WRA-JK Wire Descriptions

CAN Interface Connector (included)

USB extension cable (included)

PRE OUT cable

Power cable

AUX INPUT

REAR VIEW CAMERA

(Green)

(Green/Black)

(White)

(White/Black)

(Gray/Black)

(Gray)

(Violet/Black)

(Violet)

FRONT VIEW CAMERA

SUBW

FRONT OUT

REAR OUT

VIDEO IN

VIDEO OUT

VIDEO IN/OUT cable

REMO

(Blue/White)

REVERSE

(Orange/White)

P. ANT

(Blue)

PARKING BRAKE

(Yellow/Blue)

ACC

(Red)

BATT

(Yellow)

GND

(Black)

Jeep Wrangler i407-WRA-JK 20210811v1 13/18

Vehicle Antenna

To Interface Box

To USB flash drive, iPhone or

Android smartphone

Microphone (included)

To drive recorder, DVD player, etc.

To Rear monitor

To amplifier or equalizer

To plus side of the back lamp signal lead of the car

To power antenna

To the parking brake signal lead

Ignition key

Battery

Rear Left

Front Left

Front Right

Rear Right

Speakers

To AUX output device

To RCA Rear camera

To RCA Front camera

To input terminal of amplifier when adding an external amplifier

Jeep Wrangler i407-WRA-JK 20210811v1 14/18

Wire Harness Pin Outs

Radio Main

Blue 22AWG

Red 20AWG

Blue/White 22AWG

Orange/White 22AWG

Yellow/Blue 22AWG

Purple 20AWG

Gray 20AWG

Purple/Black 20AWG

Gray/Black 20AWG

Green 20AWG

White 20AWG

Green/Black 20AWG

White/Black 20AWG

Yellow 18AWG

Black 18AWG

Data SWC

17 18

15 16

13 14

11 12

9 10

3 4

1 2

Yellow/Black 22AWG

Red/Brown 22AWG

Yellow/Brown 22AWG

Brown/Red 22AWG

Brown/Yellow 22AWG

Radio I/O

9 10

7 8

1 2

Rear Camera

Blue/White 22AWG

Yellow/Blue 22AWG

Orange/White 22AWG

Orange 22AWG

White/Grey 22AWG

Black 22AWG

Yellow/Black 22AWG

Red 22AWG

Orange/White 22AWG

Orange 22AWG

CAN I/F

9 10

7 8

5 6

3 4

1 2 iDatalink

Red 22AWG

Blue 22AWG

Black 22AWG

White 22AWG

Red 22AWG

Black 22AWG

White 22AWG

Blue 22AWG

Maestro Power

Yellow 18AWG

Red 18AWG

Black 18AWG

Aux Power

Yellow 18AWG

Red 18AWG

Black 18AWG

Aux Power Pigtail

Yellow 18AWG

Red 18AWG

Black 18AWG

Wrangler Harness

Black 18AWG

White/Black 20AWG

Purple/Black 20AWG

White 20AWG

Purple 20AWG

Gray/Black 20AWG

Green/Black 20AWG

Gray 20AWG

Green 20AWG

Brown/Red 22AWG

Brown/Yellow 22AWG

Yellow 18AWG

Speaker Harness

OBDII

Purple 20AWG

Purple/Black 20AWG

Green 20AWG

Green/Black 20AWG

Gray 20AWG

Gray/Black 20AWG

White 20AWG

White/Black 20AWG

Red/Brown 20AWG

Yellow/Brown 20AWG

Connection Of HCE-TCAM1-WRA (Optional Rear Camera)

Jeep Wrangler i407-WRA-JK 20210811v1 15/18 iLX-407 Source Unit

USB

HDMI IN

VIDEO IN/OUT

CAN I/F MIC SWC

SXM/DAB

ANTENNA

Rear View Camera

This connection goes to the camera connector on the main harness. This handles the power, ground, reverse light, and illumination connections.

WARNING!

The use of this connection is intended for Alpine

HCE-TCAM1-WRA rear view camera ONLY.

Rear Camera

Input

Rear Camera Output

This connection provides the RCA video output for the rear camera. Failure to make this connection will result in no picture being sent to the iLX-407.

CAMERA/PRE OUT

Connection Of HCE-RCAM1-WRA (Optional Rear Camera)

iLX-407 Source Unit

USB

HDMI IN

VIDEO IN/OUT

POWER

ANTENNA

AUX Power

3-pin Black Connector

Yellow- 12V+

Constant Not Used

Black- Ground

Red- Acc 12V+

CAN I/F

CAMERA/PRE OUT

MIC SWC

SXM/DAB

POWER

Rear Camera

Input

Power & Video

Unit

Jeep Wrangler i407-WRA-JK 20210811v1 16/18

Adding The KTA-450 (Sold Separately) (2011-2017 Only)

To make room for the KTA-450 the tabs on the OEM rear support bracket need to be bent outward about 1/2” as shown in the pictures below. This will help support the rear and amplifier. A protective tape or heat shrink needs to be used so the metal does not cause damage to the amplifier. The push nut from the OEM rear support bracket will also need to be removed.

Jeep Wrangler i407-WRA-JK 20210811v1 17/18

Set Up Guide

Turn the vehicle’s Ignition switch to ACC.

Turn ON the i407-WRA-JK by pressing any key.

With the vehicle parked, engage the parking brake, release the parking brake and engage the parking brake again.

If a rear camera is present, turn it ON in the settings menu. (HOME/SETTINGS/CAMERA/REAR CAMERA/

CAMERA SELECT/REAR/OK).

If a front camera is present, turn it ON in the settings menu. (HOME/SETTINGS/CAMERA/FRONT CAMERA/

CAMERA SELECT/FRONT/OK).

If the AUX Input is being use be sure to turn it ON in the settings. (HOME/SETTINGS/GENERAL/AUX/AUX

SELECT).

Vehicle information- Set the desired gauge information. (HOME/SETTINGS/GENERAL/IDATALINK).

Detailed descriptions of the settings can be found in the owners manual which can be downloaded from the support page of the website.

Troubleshooting Guide

Symptom iPhone not working with

HDMI.

Possible Cause

Not using Apple HDMI to Lightning adapter.

Didn’t plug USB power into a 2A source.

Using incorrect HDMI adapter.

Android phone is not working with HDMI.

Miracast adapter isn’t plugged into a 2A source.

Miracast adapter has resolution settings that are too high.

iDatalink website says serial number is invalid.

No output from RCA’s

Navigation voices and/or

Bluetooth audio can’t be heard.

Incorrect serial number is being used.

Serial number may not be in iDatalink database.

Maestro module is flashed for amplified system.

The vehicle has an OEM amplifier and the warning on page 11 was not followed.

Maestro module was not flashed.

Steering wheel controls aren’t working. Vehicle data isn’t displaying.

Connection was not made properly.

Remedy

Purchase the HDMI to Lightning adapter directly from Apple. Not all 3rd party adapters work the same.

Do not plug into the USB from the Alpine head unit. A third party USB adapter will need to be used that is 2A.

If the phone has the feature to use an HDMI adapter it must be the one purchased from the manufacturer of the phone, not a third party adapter.

Do not plug into the USB from the Alpine head unit. A third party USB adapter will need to be used that is 2A.

Plug the adapter into another monitor (for example a television in the home) and reduce the resolution settings.

In the i407-WRA settings confirm the serial number. HOME/SETTINGS/GENERAL/

ABOUT/VERSION INFORMATION.

Call ADS at 1-866-427-2999 and verify.

Re-flash module for non-amplified system.

Swap the front and rear speaker connectors as shown on page 11.

Flash the maestro module as shown on page

Every harness needs to be plugged into it’s proper place. Follow page 11 and ensure every connection is going exactly where it needs to be.

Troubleshooting Guide Continued

Symptom

6 Headunit will not turn on.

Possible Cause

One of the power wires does not have proper voltage

4 pin Maestro data cable is disconnected or damaged.

OBD2 cable is not plugged in.

Main harness is not connected.

Cannot enter SETTINGS

MENU.

Vehicle is in motion or parking brake is not engaged.

Sound mutes when vehicle is shifted into reverse.

Only the front speakers are on for SXM Radio.

Mute While Backing Up is turned on in the rear camera setup.

SXM Tuner has not been activated.

Jeep Wrangler i407-WRA-JK 20210811v1 18/18

Remedy

Test the power wires with a digital multimeter and trace from there.

Check for proper connection or disconnected pins.

Connect OBD2 connector to the OBD2 port.

Check for proper connection or disconnected pins.

With vehicle in (P)PARK engage the parking brake. Release the parking brake and engage the parking brake a second time, as shown in the Setup Guide on page 16.

Change Mute While Backing Up to off.

Activate SXM Tuner.

10 iPhone or Android phone is not recognized when connected to the

USB cable, causing CarPlay or Android Auto to not function.

Loose or disconnected USB cable.

Non-compatible cable.

Check the USB connection behind the headunit.

Use the cable supplied with the iPhone or Android phone and only plug into the extension provided with the head unit.

Third party adapters like flush mount, OEM integration, and/or long extensions may not work. Only use USB extension that came with the head unit.

Dirty charging port on phone.

Clean charging port.

Rear camera not automatically coming on when vehicle is in reverse.

Rear camera just shows blank image with guide cones.

Front camera image is reversed.

Installed an amplifier and it only gets sound on FM.

Can’t be heard when making phone calls.

The rear camera was not turned on in the setup menu.

Reverse wire not properly installed.

The rear camera is not outputting an image.

A front camera was not used.

The power antenna wire was used instead of the remote wire.

The microphone is not plugged into the correct port.

Refer to Step 4 of the Set Up Guide on page

16.

If the vehicle is a manual transmission the reverse wire needs to connected to the correct wire in the passenger kick panel as shown on page 11. The wire will need to be tested and verified with a digital multimeter.

The rear camera is either not powered on properly or the video connection was not made properly.

A rear camera can not be used for the front of the vehicle. It will not display the image correctly and it will be reversed.

The remote wire is what needs to be connected to the remote turn on lead of the amplifier.

The microphone needs to be plugged into the port labeled “MIC”. If it gets plugged into the SWC port it will not function properly.

Page 11 shows the correct port to plug into.

Hello! I am an AI chatbot specifically trained to assist you with the Alpine i407-WRA-JK Installation manual. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!