Uconnect 6.5A/6.5AN
®
Owner’s Manual Supplement
SECTION
TABLE OF CONTENTS
PAGE
1
SAFETY GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1
2
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2
3
ALL ABOUT UCONNECT® ACCESS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
3
4
RADIO MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
4
5
MEDIA MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175
5
6
UCONNECT® PHONE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181
6
7
UCONNECT® 6.5A/6.5AN VOICE RECOGNITION QUICK TIPS . . . . . . . . . . . . . . . . . . . . . . . 209
7
8
NAVIGATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219
8
SAFETY GUIDELINES
CONTENTS
! SAFETY GUIDELINES . . . . . . . . . . . . . . . . . . . . .4
1
4 SAFETY GUIDELINES
SAFETY GUIDELINES
WARNING!
ALWAYS drive safely with your hands on the steering wheel. You have full responsibility and assume
all risks related to the use of the Uconnect® features
and applications in this vehicle. Only use Uconnect®
when it is safe to do so. Failure to do so may result in
an accident involving serious injury or death.
• Stop use immediately if a problem occurs. Failure to
do so may cause injury or damage to the product.
Return it to your authorized dealer to repair.
• Ensure that the volume level of the system is set to a
level that still allows you to hear outside traffic and
emergency vehicles.
Safe Usage Of The Uconnect® System
• Read all instructions in this manual carefully before
using your system to ensure proper usage!
Ensure that all persons read this manual carefully before • Your system is a sophisticated electronic device. Do
using the system. It contains instructions on how to use
not let young children use your system.
the system in a safe and effective manner.
• Permanent hearing loss may occur if you play your
Please read and follow these safety precautions. Failure
music or the system at loud volumes. Exercise caution
to do so may result in injury or property damage.
when setting the volume on your system.
• Glance at the screen only when safe to do so. If
prolonged viewing of the screen is necessary, park in a
safe location and set the parking brake.
SAFETY GUIDELINES 5
• Keep drinks, rain, and other sources of moisture away • If necessary, use a lint-free cloth dampened with a
from your system. Besides damage to your system,
cleaning solution, such as isopropyl alcohol, or an
moisture can cause electric shocks as with any elecisopropyl alcohol and water solution ratio of 50:50. Be
tronic device.
sure to follow the solvent manufacturer’s precautions
and directions.
NOTE: Many features of this system are speed dependent. For your own safety, it is not possible to use some FCC Declaration
of the touchscreen features while the vehicle is in motion.
This device complies with Part 15 of the FCC Rules and
Touchscreen
with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
• Do NOT attach any object to the touchscreen, doing
so can result in damage to the touchscreen.
1. This device may not cause harmful interference.
• Do not touch the screen with any hard or sharp objects 2. This device must accept any interference received,
(pen, USB stick, jewelry, etc.) which could scratch the
including interference that may cause undesired optouchscreen surface!
eration.
• Do not spray any liquid or caustic chemicals directly
on the screen! Use a clean and dry micro fiber lens
cleaning cloth in order to clean the touchscreen.
1
6 SAFETY GUIDELINES
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
Safety Information
Exposure to Radio Frequency Radiation
The radiated output power of the this internal wireless radio
is far below the FCC radio frequency exposure limits.
Nevertheless, the wireless radio shall be used in such a
manner that the radio is eight inches (20 cm) or further from
the human body.
The internal wireless radio operates within guidelines found
in radio frequency safety standards and recommendations,
If this equipment does cause harmful interference to which reflect the consensus of the scientific community.
radio or television reception, which can be determined by The radio manufacturer believes the internal wireless radio
turning the equipment off and on, the user is encouraged is safe for use by consumers. The level of energy emitted is
to try to correct the interference by one or more of the far less than the electromagnetic energy emitted by wireless
following measures: - Increase the separation between devices such as mobile phones. However, the use of wireless
the equipment and receiver. - Consult the dealer or an radios may be restricted in some situations or environments,
such as aboard airplanes. If you are unsure of restrictions,
experienced radio technician for help.
you are encouraged to ask for authorization before turning
on the wireless radio.
INTRODUCTION
CONTENTS
! Uconnect® 6.5A/6.5AN SYSTEM . . . . . . . . . . . . .8
2
8 INTRODUCTION
Uconnect® 6.5A/6.5AN SYSTEM
INTRODUCTION 9
1 — DISPLAY ON/OFF
5 — MORE
Push the DISPLAY ON/OFF button located on the face- Push the MORE button located on the faceplate to access
plate to turn the display ON or OFF.
additional options such as:
2 — SETTINGS
• Trip
Push the SETTINGS button located on the touchscreen to • Settings
display the list of available settings.
• Clock
3 — BACK
• APPS
Push the BACK button to return to a previous menu or
6 — PHONE
screen.
Push the PHONE button to access the Uconnect® Phone
4 — ENTER/BROWSE & TUNE/SCROLL
feature.
Push the ENTER/BROWSE button to accept a high7 — NAV
lighted selection on the screen. Rotate the TUNE/
SCROLL rotary knob to scroll through a list or tune a Push the NAV button located on the faceplate to activate
radio station.
the Navigation feature.
2
10 INTRODUCTION
8 — MEDIA
10 — ON/VOLUME
Pushing the MEDIA button will allow you to switch to Rotate the rotary knob to adjust the Volume. Push the
Media Mode (USB/iPOD®, AUX, Bluetooth®).
ON/VOLUME button to turn on the system. Push the
ON/VOLUME button a second time to turn off the
9 — RADIO
system.
Push the RADIO button located on the faceplate to enter
11 — MUTE
Radio Mode. The different tuner modes; AM, FM and
SXM (If Equipped) can be selected by pushing the Push the MUTE button for activation/deactivation of the
corresponding buttons in the Radio Mode.
volume.
ALL ABOUT Uconnect® ACCESS
CONTENTS
! INTRODUCTION TO Uconnect® ACCESS . . . . .13
▫ What Is Uconnect® Access? . . . . . . . . . . . . . . .13
▫ Included Trial Period For New Vehicles . . . . . . .17
▫ Features And Packages . . . . . . . . . . . . . . . . . .18
! GETTING STARTED WITH Uconnect® ACCESS . .19
▫ Registration . . . . . . . . . . . . . . . . . . . . . . . . . .19
▫ Set Up Your Uconnect® Payment Account . . . . .26
▫ Download the Uconnect® Access App . . . . . . .30
▫ Set up Via Mobile . . . . . . . . . . . . . . . . . . . . . .35
▫ Purchasing Apps And WiFi Hotspot For Your
Vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
▫ Using Mopar Owner Connect . . . . . . . . . . . . . .45
! USING Uconnect® ACCESS . . . . . . . . . . . . . . . .49
▫ Getting Started With Apps . . . . . . . . . . . . . . . .49
▫ 9-1-1 Call . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
▫ Roadside Assistance Call . . . . . . . . . . . . . . . . .56
▫ Yelp®. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
▫ Theft Alarm Notification . . . . . . . . . . . . . . . . .68
▫ Stolen Vehicle Assistance . . . . . . . . . . . . . . . . .71
3
12 ALL ABOUT Uconnect® ACCESS
▫ WiFi Hotspot . . . . . . . . . . . . . . . . . . . . . . . . .73
▫ Voice Texting . . . . . . . . . . . . . . . . . . . . . . . . .81
▫ Remote Door Lock/Unlock . . . . . . . . . . . . . . .90
▫ Remote Vehicle Start . . . . . . . . . . . . . . . . . . . .96
▫ Remote Horn And Lights . . . . . . . . . . . . . . . .102
▫ Via Mobile Apps . . . . . . . . . . . . . . . . . . . . . .107
! MAINTAIN MY Uconnect® ACCESS
ACCOUNT . . . . . . . . . . . . . . . . . . . . . . . . . . .141
▫ Reinstalling An App . . . . . . . . . . . . . . . . . . .141
▫ How To Remove My Uconnect® Access
Account . . . . . . . . . . . . . . . . . . . . . . . . . . . .144
▫ Adding Vehicles To My Uconnect® Access
Account . . . . . . . . . . . . . . . . . . . . . . . . . . . .148
! Uconnect® CARE & FAQs. . . . . . . . . . . . . . . . .148
▫ Uconnect® Care Business Hours:. . . . . . . . . . .148
▫ Safety Guidelines. . . . . . . . . . . . . . . . . . . . . .153
▫ Safe Usage Of The Uconnect® Access System . .154
! DEVICE CONNECTION AND AUDIO TIPS
WITH Uconnect® . . . . . . . . . . . . . . . . . . . . . . .157
ALL ABOUT Uconnect® ACCESS 13
INTRODUCTION TO Uconnect® ACCESS
Uconnect® Access provides:
To unlock the full potential of Uconnect® Access in your • The ability to remotely lock/unlock your doors and
vehicle, you first need to register with Uconnect® Access.
start your vehicle (if equipped) from virtually anywhere, with the Uconnect® Access App, the Mopar
What Is Uconnect® Access?
Owner Connect website (moparownerconnect.com)
Uconnect® Access enhances your ownership and driving
and Uconnect® Care.
experience by connecting your vehicle with a 3G cellular
connection. Uconnect® Access is available only on • The functionality to turn your vehicle into a WiFi
Hotspot on demand.
equipped vehicles purchased within the continental United
States, Alaska and Hawaii. Services can only be used where • Theft Alarm Notification via text or email.
coverage is available, see coverage map for details.
• Yelp® to help find great places, businesses and other
For a complete list of Uconnect® Access services, please
locations when you need them.
visit DriveUconnect.com.
• Voice Texting so you can compose, send and receive
text messages with your voice while keeping your
hands on the wheel.
Before you drive, familiarize yourself with the easy-touse Uconnect® System.
3
14 ALL ABOUT Uconnect® ACCESS
1. The ASSIST And 9-1-1 Buttons On The Overhead
Console
The ASSIST Button is used for contacting Roadside
Assistance, Vehicle Care and Uconnect® Care. The
9-1-1 button connects you directly to emergency services.
2. The Uconnect® “Apps” Button
This is where you can begin registration for
Uconnect® Access, find the apps and purchase WiFi
Hotspot on demand.
3. The Uconnect® Voice Command And Uconnect®
1 — Push To Initiate Or To Answer A Phone Call, Send Or
Phone Buttons On Your Steering Wheel
Receive A Text
The buttons let you use your voice to give commands, 2 — Push To Begin Radio, Media, Navigation, Apps And Climate
make phone calls, send and receive text messages Functions
3— Push To End Call
hands-free, enter navigation destinations and control
your radio and media devices.
ALL ABOUT Uconnect® ACCESS 15
WARNING!
ALWAYS drive safely with your hands on the
steering wheel. You have full responsibility and
assume all risks related to the use of the
Uconnect® features and applications in this vehicle. Only use Uconnect® when it is safe to do so.
Failure to do so may result in an accident involving serious injury or death.
3
16 ALL ABOUT Uconnect® ACCESS
1
2
3
4
5
6
7
— Uconnect® Phone Button
— Uconnect® Voice Command Button
— Uconnect® Phone Hang Up Button
— 9-1-1 Button
— ASSIST Button
— Uconnect® Access 6.5AN Radio
— Volume/Mute Button
8 — Tune or Scroll Knob/Browse or Enter Button
9 — Front Power Outlet
10 — Media Hub-may include USB port, SD Card and Audio Jack
11 — Steering Wheel Audio Controls (Right Rear Surface of
Steering Wheel)
12 — Steering Wheel Audio Controls (Left Rear Surface of
Steering Wheel)
NOTE: Jeep Renegade interior shown, your vehicle may vary.
ALL ABOUT Uconnect® ACCESS 17
first register with Uconnect® Access. Once registered,
Your new vehicle may come with an included trial period Uconnect® Access customers can purchase additional
for use of the Uconnect® Access Services starting at the services and Apps over the lifetime of their vehicle
ownership.
date of vehicle purchase*. To activate the trial, you must
Included Trial Period For New Vehicles
Radio
Radio Sales Code
Trial Period
Included Trial on New Vehicles ONLY
Uconnect® 6.5A
Uconnect® 6.5AN
RA3
RA4
12 months of the Advantage Package
Six months of the Advantage Package
* Select 2014 and 2015 Model Year New Vehicle market
3
18 ALL ABOUT Uconnect® ACCESS
There are a few quick ways for you to identify your radio.
For a more complete description, please refer to the User
Guide in your glove box or visit DriveUconnect.com.
• Both the Uconnect® 6.5A and Uconnect® 6.5AN feature a large 6.5 inch full color touchscreen.
• Only the Uconnect® 6.5AN will have the HD Radio
icon when listening to FM or AM stations. The icon
will be lit when it is receiving an HD Radio signal (not
all stations currently broadcast an HD Radio signal).
Features And Packages
After the trial period, you can subscribe to continue your service
by visiting the Uconnect® Store located within the Mopar
Owner Connect website (moparownerconnect.com). If you
need assistance, you can also call Uconnect® Care at
855-792-4241. For the latest information on packages and
pricing information, visit DriveUconnect.com.
ALL ABOUT Uconnect® ACCESS 19
GETTING STARTED WITH Uconnect® ACCESS
Registration
To unlock the full potential of Uconnect® Access in your
vehicle, you first need to register with Uconnect® Access.
1. From the parked vehicle with the radio touchscreen
powered on, press the “MORE” button and select
“APPS.”
NOTE: Should you require assistance anytime during
the registration process, call Uconnect® Care at
1-855-792-4241.
2. Press “Register” on the reminder screen or select the
“Uconnect® Registration” button on the touchscreen
which appears in the “Favorites Tab” on the Apps list.
3
20 ALL ABOUT Uconnect® ACCESS
3. The Uconnect® Access Registration App will open 4. Enter your email address into the radio touchscreen.
and display step-by-step instructions to start your
registration.
ALL ABOUT Uconnect® ACCESS 21
5. This message will display on the touchscreen indicat- 6. Check for an email from Uconnect® Access that coning your email submission was accepted. In a few
tains your personalized registration link. If you don’t
minutes, you will receive an email which will allow
see it, check your spam or junk mail folder. Open the
you to register your vehicle for Uconnect® Access. You
email and click on the link to continue registering.
should open this email and begin your Uconnect®
NOTE: For security reasons, this link is valid for 72 hours
Access registration within 72 hours.
from the time you submitted your email address into the
radio touchscreen. If the link has expired, simply re-enter
your email address into the Uconnect® Registration App
on the radio touchscreen to receive another link. The
secured registration link will take you through the
Uconnect® Access registration process step by step.
3
22 ALL ABOUT Uconnect® ACCESS
ALL ABOUT Uconnect® ACCESS 23
For additional registration assistance while in the vehicle,
turn the ignition on and push the ASSIST button to
contact Uconnect® Care.
7. To unlock the full potential of Uconnect® Access in
your vehicle, you will need to create or validate an
existing Mopar Owner Connect account (previously
Owner Center). Uconnect® along with Mopar Owner
Connect have joined forces to create one destination to
manage all of your vehicle needs — from managing
your Uconnect® Access account to tracking service
history and finding recommended accessories for your
vehicle. If you already have a Mopar Owner Connect
account, log in to the website with your existing
username and password. For assistance with this web
based registration process, call Uconnect® Care at
1-855-792-4241.
3
24 ALL ABOUT Uconnect® ACCESS
ALL ABOUT Uconnect® ACCESS 25
8. Once you are logged in to your Mopar Owner Connect
account, you will create a personal Uconnect® Security PIN. The Uconnect Security PIN will be required
to authenticate you when accessing your account via
Uconnect® Care or performing any remote services
such as Remote Door Lock/Unlock, Remote Horn &
Lights, or Remote Vehicle Start.
9. If your vehicle qualifies for a trial package it will be
presented. Simply agree to the Uconnect® Terms of
Service (checkbox) and then select the “Start Service”
button.
3
26 ALL ABOUT Uconnect® ACCESS
At this point your vehicle is registered with Uconnect®
Access. Apps will be downloaded the next time you start
your vehicle. If the Apps have not appeared after 24
hours, please contact Uconnect® Care. The recommended
next steps are to:
• Download the Uconnect® Access App (allows you to
utilize services such as Remote Door Unlock and Via
Mobile).
• Set up your Uconnect® Payment Account (provides
the option to purchase WiFi Hotspot and renew your
subscription).
• Set up your Via Mobile profile on Mopar Owner
Connect website (if equipped).
Set Up Your Uconnect® Payment Account
Setting up your Uconnect® Payment Account allows you
to make purchases from your vehicle (such as WiFi
Hotspot) and can be used to ensure uninterrupted service
at the end of the included trial period. Your Uconnect®
Payment Account is optional, but we recommend it so
that you can enjoy the full benefits of the system.
Setting up your Uconnect® Payment Account during
registration
1. Setting up your Uconnect® Access Payment Account
is completely optional. After you have selected a
package and accepted the Terms of Service, you will
be asked to set up your Uconnect® Payment Account
as an optional step. Please enter the required information, and then click on the Create Uconnect® Payment
Account button. As part of this step, you will have
created a Uconnect® Payment PIN which you will use
anytime you make purchases in the Uconnect® Store.
ALL ABOUT Uconnect® ACCESS 27
1. Log In to Mopar Owner Connect with your
username/email and password.
2. In the upper-right corner of the screen, click on the
“Edit Profile” button.
3
Setting up AFTER registration and Managing your
Uconnect® Payment Account
If you didn’t set up your Uconnect® Payment Account
when you registered, or you want to make changes later
on, just go to moparownerconnect.com to manage your
account.
28 ALL ABOUT Uconnect® ACCESS
3. On the left side of the next screen, click on the tab
called “Uconnect® Payment Account”. It will take you
to a page where you can manage your payment
options, including:
• Adding or editing your credit card information for
payment
• Editing your billing address
• Reviewing your current subscriptions to packages
and Apps
• Changing your Uconnect® Payment PIN, or your
Security Question
• Viewing transaction history of purchases from the
Uconnect® Store
ALL ABOUT Uconnect® ACCESS 29
3
30 ALL ABOUT Uconnect® ACCESS
Download the Uconnect® Access App
The Uconnect® Access smartphone app allows you to
remotely lock or unlock your doors, start your engine (if
equipped) and activate your horn and lights from virtually anywhere. The smartphone app also features Via
Mobile (if equipped) which uses your smartphone’s data
plan to access your personal Pandora®, iHeartRadio,
Slacker Radio and Aha™ accounts and control them
using your vehicle touchscreen.
The Uconnect® Access app is only compatible with
select iPhone® and Android smartphones. Visit
UconnectPhone.com to confirm that your smartphone is
compatible with Uconnect®.
ALL ABOUT Uconnect® ACCESS 31
Why do I need the Uconnect® Access App?
Unlike your key fob, the Uconnect® Access app on your
smartphone can send commands to your vehicle from
any distance so long as your phone and vehicle are both
in cellular range. The Uconnect® Security PIN that was
set up during registration is required for remote services.
• Lock or unlock your car doors from virtually any
location
• Start your car to warm it up, or cool it down, before
you get inside
Once you’ve confirmed your smartphone is compatible, • Sound your horn and flash your lights to find your
vehicle in a crowded parking lot
Android and iPhone® users should visit their respective
app store and search for “Uconnect® Access”.
• Contact Customer Care or Roadside Assistance with
the push of a button on your smartphone
3
32 ALL ABOUT Uconnect® ACCESS
• Use Via Mobile to access your personal Pandora®,
iHeartRadio, Slacker Radio and Aha™ from the vehicle and control them using your vehicle touchscreen
ALL ABOUT Uconnect® ACCESS 33
To download the app to your smartphone, go to your
respective app store and search for “Uconnect® Access”
(there is no charge to download and install the app to
your smartphone).
3
34 ALL ABOUT Uconnect® ACCESS
• The vehicle must be properly equipped with factoryinstalled features that enable remote commands. (i.e.
• Vehicle must be properly equipped with the
Remote Door Lock/Unlock, Remote Start/Stop and
Uconnect® Access System
Remote Horns and Lights)
• Your smartphone must be compatible with the • Vehicle must be in the 48 contiguous states and Alaska,
Uconnect® Access App
where cellular coverage is available
Requirements
• Vehicle must be in range of a usable and authorized FAQs
cellular signal
1. How much does the Uconnect® Access App cost?
Uconnect® does not charge for the App, however to
• Your smartphone sending the command must be in
utilize the Remote Services (e.g., Remote Door Lock/
cellular range to send the command
Unlock) a subscription or trial is required to the
• Vehicle must be registered with Uconnect® Access and
Advantage Package.
have an active subscription that includes the appli2. Will my vehicle be safe if I lose my smartphone? People
cable feature or App
sometimes lose their phone, which is why security
measures have been engineered into the Uconnect®
• Owner must have a compatible smartphone and
Access App. Asking for your username/email, passdownload the Uconnect® Access App
word and Uconnect® Security PIN help to ensure that
nobody can get into your vehicle if they happen to
find your smartphone.
ALL ABOUT Uconnect® ACCESS 35
3. Why can’t all phones use the Uconnect® Access App?
The Uconnect® Access App has been designed to
work on most smartphones with the Apple and Android operating systems. Visit UconnectPhone.com
to confirm that your smartphone is compatible with
Uconnect®.
4. How do I know how much data is being used when
I’m using Via Mobile? Uconnect® Access Via Mobile
uses your smartphone’s existing data plan to stream
content. Data usage varies by phone/device, content
(e.g. videos), high quality audio and several other
factors. Please refer to your device carrier for specific
details.
Set up Via Mobile
After registration, link your app accounts to your Via
Mobile Profile on Mopar Owner Connect. If you already
have an account with these apps, click “set up” to enter
your information. If you do not have an account, you can
create one.
3
36 ALL ABOUT Uconnect® ACCESS
NOTE: If you’ve already registered with Uconnect® Access, but have not set up your Via Mobile apps, you can
come back to this page at any time by logging in to
moparownerconnect.com. Click on “Via Mobile Profile.”
Determine if Your Vehicle is Via Mobile-enabled
To see if your Uconnect® 6.5A or 6.5AN system is
equipped with Via Mobile Apps, press the “Apps” button, then press the “All Apps” button on the left side of
the touchscreen. If you see Aha™, iHeartRadio,
Pandora® or Slacker Radio then your system is capable
of playing Via Mobile Apps (registration required).
Using Via Mobile
Launch the Uconnect® Access app on your connected
smartphone and log in with your Mopar Owner Connect
Username/Email and password. From the vehicle touchscreen select an app from the apps list. To launch an app
using voice recognition, press the button on the steering
wheel and say, “launch app name Via Mobile.”
Connect Smartphone to the Vehicle Touchscreen
The Uconnect® Access app is compatible with select iPhone®
and Android smartphones. Visit UconnectPhone.com to
confirm that your smartphone is compatible with
Uconnect®. Once you’ve confirmed your smartphone is
Earlier vehicles with Uconnect® 6.5A or 6.5AN may compatible, pair it to Uconnect® using the Bluetooth (BT)
qualify for a software upgrade to enable Via Mobile Hands Free Profile to use Via Mobile apps.
Apps. You can call Uconnect® Care at 855-792-4241 or
NOTE: When connecting multiple devices, Via Mobile
visit DriveUconnect.com/features/via-mobile/.
audio will stream using the BT Hands Free Profile, not
• Click on Help & Support > Select your Brand > System the Media (A2DP) profile. If using an iPhone®, a USB
Updates
cable may also be used for the data connection.
ALL ABOUT Uconnect® ACCESS 37
Data Usage
• Yellow indicates a Bluetooth connection error
Uconnect® Access Via Mobile uses your smartphone’s • Red indicates a user account problem or network
existing data plan to stream content. Data usage varies by
connection error
phone/device, content, high quality audio and several
other factors. Please refer to your device carrier for
specific details.
Connection Status
The Via Mobile button provides a status indication of the
smartphone connection for Via Mobile app use. Under
“Settings” in the Uconnect® Access app on your smartphone, confirm that Via Mobile data has been turned on.
• Green indicates the data connection is ready
• Blue indicates the data connection is established
3
38 ALL ABOUT Uconnect® ACCESS
Purchasing Apps And WiFi Hotspot For Your
Vehicle
Apps and WiFi Hotspot can be purchased from the
Uconnect® Store from within your vehicle, and online at the
Mopar Owner Connect website moparownerconnect.com.
You must first register and set up a Uconnect® Payment
account.
ALL ABOUT Uconnect® ACCESS 39
Purchasing Apps And WiFi Hotspot From Within Your 3. From the Uconnect® Store, select the service you wish
Vehicle:
to purchase.
1. With the vehicle parked and the radio powered on,
press the “MORE” button and select “APPS.”
2. To launch the Uconnect® Store, select Apps > All
Apps > Uconnect® Store.
3
40 ALL ABOUT Uconnect® ACCESS
4. This will launch the selected service or package into 5. The Uconnect® Store will display a “Purchase Overpurchase mode along with providing additional inforview” message confirming the financial details for the
mation. The purchase process begins when you press
App you are about to purchase. Press the “Purchase”
the “Buy” button on the touchscreen.
button on the touchscreen to continue.
ALL ABOUT Uconnect® ACCESS 41
6. The User must select “AGREE” to complete the pur- 7. The Uconnect® Store will ask you to “Confirm Paychase. “DISAGREE” will cancel the purchase and
ment” using your default payment method on file in
re-direct customers back to the Uconnect® Store landyour Uconnect® Payment Account. Press the “Coming page.
plete” button on the touchscreen to continue.
3
42 ALL ABOUT Uconnect® ACCESS
8. The Uconnect® Payment Account will then ask for
your “Payment PIN.” After entering this four digit
PIN, press the “Continue” button on the touchscreen
to make the purchase.
NOTE: Purchased Apps and services can take up to 30
minutes to download, depending on your vehicle’s cellular coverage at time of purchase. If your download
takes more than 30 minutes, please contact Uconnect®
9. You will receive a confirmation message that your Care by pushing the ASSIST button on the rear view
purchase has been submitted. Press “OK” to end the mirror.
process.
ALL ABOUT Uconnect® ACCESS 43
Purchasing Apps Online From Mopar Owner Connect
Website
You can also purchase Apps or renew your subscription
to a package from the Mopar Owner Connect website.
Log In to the Mopar Owner Connect website
moparownerconnect.com with your username/email
and password, and click on the “Store” tab.
1. Log In to Mopar Owner Connect with your
username/email and password.
2. Click on the tab that says “Shop.”
3
44 ALL ABOUT Uconnect® ACCESS
3. Click on the link to the Uconnect® Store.
4. You can now browse through the various packages,
features and Apps available for your vehicle. Look
through your options, read the details, and if you find
something you want for your vehicle click on the
“Purchase” button.
ALL ABOUT Uconnect® ACCESS 45
Using Mopar Owner Connect
The
Mopar
Owner
Connect
website
moparownerconnect.com provides you with all the
information you need, all in one place. You can track your
service history, find recommended accessories for your
vehicle, watch videos about your vehicle’s features, and
easily access your user guides and manuals. It is also
where you can manage your Uconnect® Access account.
This section will familiarize you with the key elements of
the website that will help you get the most of your
Uconnect® Access system.
3
1. Your Vehicle(s):
Images are placed here to represent the Chrysler
Group vehicles (Chrysler, Jeep, Dodge, Ram, SRT and
FIAT) you own. If a vehicle you own is not shown
here, click on the “Add New Vehicle” button. Likewise, if a vehicle is shown that you no longer own
click on the “Edit Profile” to manage your account.
46 ALL ABOUT Uconnect® ACCESS
2. Edit Profile:
To manage the details of your Uconnect® Access
account, such as your contact information, password
and PIN, click on the “Edit Profile” button to access
the details of your account.
3. Shop:
5. Remote Services:
For vehicles with an active Uconnect Access subscription, press one of these icons and enter your four-digit
Uconnect® Security PIN to command your vehicle to
remotely start, lock/unlock doors or sound the horn
and lights.
To purchase a WiFi hotspot and renew your subscrip- 6. Subscription Status:
tion to a package, click on the “Shop” tab, then go to
Refer to this section to quickly see if you are currently
the Uconnect® Store to make your purchase.
subscribed to remote services.
4. Connected Vehicle:
This statement will indicate which vehicle’s you own
that are equipped with the Uconnect® Access system.
Other vehicles you own may not have Uconnect®
Access and will indicate that it is a non-Uconnect®
Access Vehicle.
7. Uconnect® Access App:
This is where you can enter the mobile phone number
for your compatible smartphone to download the
Uconnect® Access App. Phone compatibility can be
verified at UconnectPhone.com. For more details, see
the section labeled Download the Uconnect® Access
App.
ALL ABOUT Uconnect® ACCESS 47
8. Learn & Use:
To get the Uconnect Access App from the Mopar Owner
Click on the “Learn & Use” tab to find user guides and Connect website:
other information about your vehicle. More specifi- 1. Log on to moparownerconnect.com using the
cally, there is a dedicated Uconnect® Access tab in this
username/email and password you used when regissection to learn all about your connected vehicle
tering your Uconnect® Access system.
capabilities.
NOTE: If you forgot your username or password, links
Editing Your Notifications
are provided on the website to help you retrieve them.
Notifications are an important element of your 2. Once logged in you will find yourself on the DashUconnect® Access Account. For example, any time you
board. Click the “Edit Profile” button in the upperuse your remote services (such as Remote Door Unlock),
right corner of the page.
or if your theft alarm is set off, you can elect to receive a
text message and/or email to notify you of the event. To 3. Click the Uconnect® Notifications tab on the left side
of the page.
set up the notifications, please follow these instructions.
NOTE: Standard text message rates apply.
4. If you have more than one vehicle with Uconnect®
Access, please select which vehicle you want to manage notifications for using the drop down menu.
3
48 ALL ABOUT Uconnect® ACCESS
5. You can enter up to five mobile phone and/or email
addresses to your notifications, and you can customize
which ones receive the types of messages.
6. If you add a mobile phone number, you will receive a
confirmation text message asking to confirm and
receive vehicle notifications. If you are OK with this,
reply to the text message saying “yes” (message and
data rates may apply, please see your mobile phone
provider for details). If you have questions, text
“HELP” in your reply.
ALL ABOUT Uconnect® ACCESS 49
• Favorite Apps — this is the default screen when you
first press the “Apps” button on the touchscreen, and
Getting Started With Apps
is a good place to put the Apps you use most freApplications (Apps for short) in your Uconnect® Access
quently. To make an App a “favorite,” press the
system are designed to deliver the features and services
“Settings” button on the touchscreen to the right of the
that you want. There are two basic categories:
App and select “Make a favorite.”
USING Uconnect® ACCESS
• Built-In Apps — uses the built-in Cellular Network on • All Apps — all of your available Apps will reside in
your Uconnect® 6.5A or 6.5AN radio.
the “All Apps” folder.
• Uconnect® Access via Mobile (if equipped) — uses
the Uconnect® Access app and your smartphone’s
data plan to access your personal Pandora®, iHeartRadio, Aha™ by HARMAN and Slacker accounts from
the vehicle and control them using the vehicle touchscreen. Customer’s data plan charges will apply.
• Quit Apps — press this tab to see which Apps are
currently running.
NOTE: Most Uconnect® Access features do not require
that you have a compatible Smartphone. The Uconnect®
Access features work using the built-in cellular connection. Only Voice Texting the Uconnect® Access App and
Get started with your Uconnect® Access Apps by pressing
the Uconnect® “Apps” button on the menu bar at the Via Mobile Apps require a compatible smartphone to
bottom right corner of the in-vehicle touchscreen. Available work with your Uconnect® Access system.
Apps and features are organized by the tabs on the left of
the screen.
3
50 ALL ABOUT Uconnect® ACCESS
9-1-1 Call
Uconnect® Access In-Vehicle Assistance Features
Access To Emergency Services At The Push Of A Button With Uconnect® Access, your vehicle has on-board assistance features located in the overhead console designed
to enhance your driving experience if you should ever
need assistance or support.
Description
9-1-1 Call is a feature that, at the push of a button, can
contact emergency services. It’s a convenient way to get
in contact with a 9-1-1 operator in the event of an
emergency. When the connection between the vehicle
and a 9-1-1 operator is made, your vehicle will automatically transmit location information to the 9-1-1 operator.
ALL ABOUT Uconnect® ACCESS 51
3. You should be able to speak with the 9-1-1 operator
through the vehicle audio system to determine if
1. Push the “9-1-1” Call button; the indicator light will
additional help is needed.
turn green indicating a call has been placed.
If a connection is made between a 9-1-1 operator and
NOTE: In case the “9-1-1” Call button is accidentally your vehicle, you understand and agree that 9-1-1 operapushed, there is a 10 second delay before the 9-1-1 call is tors may, like any other 9-1-1 call, record conversations
placed. The system will verbally alert you that a call is
and sounds in and near your vehicle upon connection.
about to be made. To cancel the 9-1-1 Call connection,
push the “9-1-1” Call button or press the “Cancellation” 9-1-1 Call System Limitations
button on the Phone touchscreen.
Vehicles sold in Canada and Mexico DO NOT have 9-1-1
How It Works
2. Once a connection between the vehicle and a 9-1-1
operator is made, the 9-1-1 Call system will transmit
the following important vehicle information to a 9-1-1
operator:
• Indication that the occupant placed a 9-1-1 Call.
• The vehicle brand.
• The last known GPS coordinates of the vehicle.
Call system capabilities. 9-1-1 or other emergency line
operators in Canada and Mexico may not answer or
respond to 9-1-1 system calls. If the 9-1-1 Call system
detects a malfunction, any of the following may occur at
the time the malfunction is detected.
• The 9-1-1 light will continuously be illuminated red.
• The screen will display the following message “Vehicle
phone requires service. Please contact your dealer.”
3
52 ALL ABOUT Uconnect® ACCESS
• An In-Vehicle Audio message will state “Vehicle phone • The vehicle battery loses power or becomes disconrequires service. Please contact your dealer.”
nected during a vehicle crash.
Even if the 9-1-1 Call system is fully functional, factors • Wireless and/or Global Positioning Satellite signals
beyond Chrysler Group LLC’s control may prevent or
are unavailable or obstructed.
stop 9-1-1 Call system operation. These include, but are
• Equipment malfunction at the 9-1-1 operator facility.
not limited to, the following factors:
• Operator error by the 9-1-1 operator.
• The ignition key has been removed from the ignition
and the delayed accessories mode is active.
• Wireless network congestion.
• The ignition key is in OFF position.
• The vehicle’s electrical systems are not intact.
• The 9-1-1 Call system software and/or hardware is
damaged during a crash.
• Weather.
• Buildings, structures, geographic terrain, or tunnels.
ALL ABOUT Uconnect® ACCESS 53
If your vehicle loses battery power for any reason (in- Requirements
cluding during or after an accident) the 9-1-1 Call System,
• This feature is available only on vehicles sold in the
among other vehicle systems, will not operate.
US.
• Vehicle must be properly equipped with the
Uconnect® Access System.
• Vehicle must be in range of a usable and authorized
cellular signal.
• Vehicle must be powered in the ON/RUN or ACC
(Accessory) position with a properly functioning electrical system.
3
54 ALL ABOUT Uconnect® ACCESS
WARNING!
WARNING! (Continued)
• Never place anything on or near the vehicle’s
wireless and GPS antennas. You could prevent
wireless and GPS signal reception, which can prevent your vehicle from placing an emergency call.
Wireless and GPS signal reception is required for
the 9-1-1 Call system to function properly.
• Ignoring the Rearview Mirror light could mean you
will not have 9-1-1 Call services. If the Rearview
Mirror light is illuminated, have an authorized
dealer service the 9-1-1 Call system immediately.
• The Occupant Restraint Controller (ORC) turns on
the Air Bag Warning Light on the instrument panel
if a malfunction in any part of the air bag system is
detected. If the Air Bag Warning Light is illuminated, the air bag system may not be working
properly and the 9-1-1 system may not be able to
send a signal to a 9-1-1 operator. If the Air Bag
Warning Light is illuminated, have an authorized
dealer service your vehicle immediately.
• If anyone in the vehicle could be in danger (e.g.,
fire or smoke is visible, dangerous road conditions
or location), do not wait for voice contact from a
9-1-1 operator. All occupants should exit the vehicle
immediately and move to a safe location.
(Continued)
(Continued)
ALL ABOUT Uconnect® ACCESS 55
WARNING! (Continued)
• The 9-1-1 Call system is embedded into the vehicle’s
electrical system. Do not add any aftermarket electrical equipment to the vehicle’s electrical system.
This may prevent your vehicle from sending a signal
to initiate an emergency call. To avoid interference
that can cause the 9-1-1 Call system to fail, never add
aftermarket equipment (e.g., two-way mobile radio,
CB radio, data recorder, etc.) to your vehicle’s electrical system or modify the antennas on your vehicle. IF
YOUR VEHICLE LOSES POWER FOR ANY REASON (INCLUDING DURING OR AFTER AN ACCIDENT) THE UCONNECT® FEATURES, APPS
AND SERVICES AMONG OTHERS WILL NOT
OPERATE.
FAQs
1. What Happens If I Accidentally Push The 9-1-1
Button? You have 10 seconds after pushing the 9-1-1
button to cancel the call. To cancel the call, either push
the “9-1-1” button again, or press the “cancel” button
on the in-vehicle touchscreen.
2. What Type Of Information Is Sent When I Call 9-1-1
From My Vehicle? Certain vehicle information, such
as make and model, is transmitted along with last
known GPS location. Also note that 9-1-1 operators
may record conversations and sounds within your
vehicle once a connection is made, and that by using
the service you consent to having this information
shared.
3. When Could I Use The 9-1-1 Button? You can use the
9-1-1 button to make a call if you or someone else
needs emergency assistance.
3
56 ALL ABOUT Uconnect® ACCESS
Roadside Assistance Call
Uconnect® Access In-Vehicle Assistance Features
Easy Call To Roadside Assistance 24/7 Using Assist With Uconnect® Access, your vehicle has on-board assisButton
tance features designed to enhance your driving experience if you should ever need assistance or support.
Description
Vehicles equipped with the Uconnect® Access system
feature will contain an ASSIST button. Once the vehicle
has been registered and is subscribed to the Advantage
Package, the ASSIST button can connect you directly to
one of three important care centers for support.
• Roadside Assistance — If you get a flat tire, or need a
tow, you’ll be connected to someone who can help
anytime. Additional fees may apply. (see the Disclaimers section below for more detail).
• Uconnect® Care — In vehicle support for Uconnect®
Access System, Apps, and Features.
ALL ABOUT Uconnect® ACCESS 57
• Vehicle Care — Total support for your Chrysler Group Requirements
vehicle.
• This feature is available only on vehicles sold in the
How It Works
US.
You or someone in the vehicle simply presses the ASSIST • Vehicle must be properly equipped with the
button located in the overhead console and you will be
Uconnect® Access System.
presented with your ASSIST options. Make your selec• Vehicle must be in range of a usable and authorized
tion by pressing the screen.
cellular signal.
• Vehicle must be registered with Uconnect® Access and
have an active subscription that includes the applicable feature or App.
• Vehicle must be powered in the ON/RUN or ACC
(Accessory) position with a properly functioning electrical system.
3
58 ALL ABOUT Uconnect® ACCESS
Disclaimers
FAQs
If Roadside Assistance is provided to your vehicle, you
agree to be responsible for any additional roadside
assistance service costs that you may incur. In order to
provide Uconnect® Services to you, we may record and
monitor your conversations with Roadside Assistance,
Uconnect® Care or Vehicle Care, whether such conversations are initiated through the Uconnect® Services in
your vehicle, or via a landline or mobile telephone, and
may share information obtained through such recording
and monitoring in accordance with regulatory requirements. You acknowledge, agree and consent to any
recording, monitoring or sharing of information obtained
through any such call recordings.
1. What Is The Phone Number For Roadside Assistance? The phone number is 800-521-2779.
NOTE: Some Apps are suspended while an Assist call is
active
2. If I Am Subscribed To Uconnect® Access, Does It
Cover Towing Or Other Expenses Incurred By Using
Chrysler Roadside Assistance? No, however your new
vehicle may include Roadside Assistance services.
Yelp®
Looking for a burrito joint that is open? A boutique to
buy a new pair of jeans? Yelp® is here to help. Use Yelp®
to search for places to eat, shop, relax and play.
ALL ABOUT Uconnect® ACCESS 59
• The live and local search engine will scan 12 categories
and millions of POIs to provide drivers with a local
Yelp® is a familiar, widely used website and mobile app
guide for real word-of-mouth recommendations.
that connects people to great local businesses. Now with
Uconnect® Access, Yelp® has been adapted for your • With one press, select from the list to find location
vehicle, and on the go capability. Yelp® gives you the
address, phone number, user ratings, hours of operaability to search for a Point of Interest (POI) or desired
tion (if available) and price ratings (if available).
destination using either pre-defined search categories, or
custom searches, using keywords like “tacos.” Searching • The ability to call the selected POI directly (a phone
must be paired via Bluetooth®), or have the address
can be done by voice recognition or by using the touchimmediately sent to the navigation system for routing
screen keypad.
(if equipped).
Here is what Yelp® can do for you while you are on the
road:
Description
• Deliver a list of up to 20 results, prioritizing by best
match, by distance or rating.
• Provide up-to-date search listings (pulling the latest
information from the cloud).
3
60 ALL ABOUT Uconnect® ACCESS
How It Works
1. Using the touchscreen, launch Yelp® by pressing
Apps > All Apps > Yelp®.
Give It A Try!
button on the steering wheel and say
1. Push the
“Launch Yelp®.”
OR
Using voice recognition, push the
say “Launch Yelp®.”
button and
2. Push the
button on the steering wheel and say
“Yelp® Search.”
ALL ABOUT Uconnect® ACCESS 61
3. Uconnect® will prompt you to say something like, 6. Navigate to the location by pressing “Go Now” (if
“car wash.” After the beep, say “restaurants.”
equipped with navigation).
4. The Uconnect® system will link out to the cloud to do NOTE: Save your destination to Favorites. To find it
your Yelp® search, and depending on your search again go to Nav > Where to > Favorites.
request, this may take up to 30 seconds.
5. Using the touchscreen, select a restaurant from the list
of search results.
Action
Touchscreen
Open Yelp®
Apps > All Apps >
Yelp®
Press inside the #search#
field. Using the keypad,
type what you are looking
for.
Create a Custom Search
Voice Command
(VR button on steering
wheel)
#Launch Yelp®#
Give It A Try!
Say #Launch Yelp®#
Type #Sushi#
–
3
62 ALL ABOUT Uconnect® ACCESS
Action
Touchscreen
Initiate a search for a
nearby POI
Find nearest Restaurants
Find nearest Nightlife
Find nearest Coffee
Find nearest Entertainment
Find nearest Gas
Find nearest Hotels
Find nearest Banks
Find nearest Parking
Find nearest Shopping
Find nearest Drugstores
Find nearest Urgent Care
Select <Search Category>
Voice Command
(VR button on steering
wheel)
#Yelp® Search#
Select
Select
Select
Select
Select
Select
Select
Select
Select
Select
Select
#Restaurants#
#Nightlife#
#Coffee#
#Entertainment#
#Gas#
Hotels#
#Banks#
#Parking#
#Shopping#
#Drugstores#
#Urgent Care#
Restaurants
Nightlife
Coffee
Entertainment
Gas
Hotels
Banks
Parking
Shopping
Drugstores
Urgent Care
Give It A Try!
Say #Yelp® Search#
Say
Say
Say
Say
Say
Say
Say
Say
Say
Say
Say
#Restaurants#
#Nightlife#
#Coffee#
#Entertainment#
#Gas#
#Hotels#
#Banks#
#Parking#
#Shopping#
#Drugstores#
#Urgent Care#
ALL ABOUT Uconnect® ACCESS 63
Action
Touchscreen
Find nearest Hospitals
Select a POI
Select Hospitals
Select <POI> from the
list
Press the star to add it
Add a Custom Search
Category
Delete a Custom Category
Sort search results by Best
Match, Rating or Distance
Route to a POI
(if equipped)
Call a POI
(via Bluetooth®)
Voice Command
(VR button on steering
wheel)
#Hospitals#
–
Give It A Try!
Say #Hospitals#
Select <POI>
–
Press the star
Press the star to remove it
–
Press Best Match, Rating,
or Distance
Press Go Now
–
Press the star (there is a
confirmation pop-up)
Press Rating
–
Press Go Now
Press <phone number>
–
Press <phone number>
3
64 ALL ABOUT Uconnect® ACCESS
• Vehicle must be registered with Uconnect® Access and
have an active subscription that includes the appliYelp® provides the ability to save cuscable feature or App.
tom search categories by first initiating
the search, then pressing the star. To • Vehicle must be powered in the ON/RUN or ACC
delete a search category, select it, and
(Accessory) position with a properly functioning elecpress the star. A confirmation prompt
trical system.
will appear to confirm. Create up to 36
• Vehicle must have onboard navigation to use Go Now.
custom search categories!
• Mobile device must be paired with Bluetooth® and
Requirements
connected to call a POI directly.
• Vehicle must be properly equipped with the
Uconnect® Access System.
How To Add And Delete Search Categories
• Vehicle must be in range of a usable and authorized
cellular signal (indicated by the signal strength bars on
the “Apps” button on the bottom right hand side of the
touchscreen).
ALL ABOUT Uconnect® ACCESS 65
• If you wish to cancel a search request, press “Cancel.”
Safety Information
WARNING!
• ALWAYS drive safely with your hands on the
steering wheel. You have full responsibility and
assume all risks related to the use of the Uconnect®
features and applications in this vehicle. Only use
Uconnect® when it is safe to do so. Failure to do so
may result in an accident involving serious injury
or death.
Tips And Shortcuts
• To learn more about a listing, press the line that
appears on the display details such as the address,
phone number and hours of operation (if applicable).
• Sort results by Best Match, Rating or Distance (default
is Best Match).
• The Rating tab will re-sort your search based on
ratings submitted by everyday users to Yelp®’s online
database.
• Distance will sort by the closest POI near you.
•
• To improve your search results, use single search terms
like “coffee” rather than multiple words, which may
deliver mixed results, for example, “home improve•
ment and gardening stores.”
• Press the “microphone” on the touchscreen to use
voice commands.
button a
To bypass the voice prompts push the
second time to barge in and state your desired
command.
To exit Yelp®, press the “X” (close) button in the upper
right corner of the touchscreen.
3
66 ALL ABOUT Uconnect® ACCESS
5. How do I select my final desired location? Make your
final selection by pressing the desired POI name in
Is there a Help menu within the Yelp® App? No, but
your search result list. Voice recognition is not supyou may push the ASSIST button and select
ported for the final POI selection.
Uconnect® Care to ask for help.
6. Can I conduct a search using a phone number? The
Will Yelp® allow me to route directly to my desired
ability to search Yelp® by phone number is not
search result? Yes, by selecting Go Now. A factory or
currently available.
dealer-installed Uconnect® navigation system is required.
7. Why don’t I see the Yelp® App on my in-vehicle
touchscreen? The vehicle must be registered with
Will Yelp® allow me to make a phone call to my
Uconnect® Access and have an active subscription
desired search result? Yes. Mobile phone must be
that includes the applicable feature or App. The App
paired and connected.
may take several minutes to download after completHow many search results does Yelp® generate at a
ing registration for the first time.
time? Maximum of 20 listings.
FAQs
1.
2.
3.
4.
ALL ABOUT Uconnect® ACCESS 67
8. What is the difference between Yelp® and onboard 9. Why doesn’t Yelp® recognize my Voice Command
navigation? Both experiences are slightly different,
search request? To Search Yelp®, Uconnect® must
but may yield the same results. For example, while
establish a connection to the Yelp® cloud-based serboth the onboard navigation system and Yelp® convice, using the built in 3G connection in your
veniently provide pre-defined search categories,
Uconnect® Access system. Be sure to wait until AFYelp® gives the customer the ability to create their
TER the beep, before you speak your search request.
own custom search category, such as “Guitar shops.”
Your voice command might not be fully captured if
In addition, the customer may be able to view a POI on
there is a misrecognition, resulting in inaccurate rea map before routing there when using the onboard
sults. You will see visual cues highlighted in green,
navigation system. Both onboard navigation and
which says “Listening” to let you know it’s your turn
Yelp® provide phone numbers when they are availto say a command.
able, but Yelp® provides the customer with user
10. How come I don’t see the same results when I use
ratings and hours of operation (when available). Since
Yelp® on my smart phone? This is because Yelp® is
Yelp® pulls its data from the cloud, the customer will
only returning locations that have been rated by
always get the most up-to-date information. Finally,
Yelp® users. Un-rated locations do not show up in
Yelp® requires that the vehicle be in range of a usable
the search results. This is an enhancement that will be
and authorized cellular signal.
coming soon.
3
68 ALL ABOUT Uconnect® ACCESS
11. Can I use Yelp® to search for places based on my
end destination, instead of just places around me?
Yes, you can say “Pizza in Chicago,” and add it as a
stop on your road trip.
Theft Alarm Notification
Should you receive a notification that your theft alarm
has been set-off, please react with caution. There are a
number of reasons why your alarm may have been
triggered, one of which could be that your vehicle was
stolen. If so, please see the details of the Stolen Vehicle
Assistance service below.
Notifies you via email or text message (SMS) when the
How It Works
vehicle’s factory-installed theft alarm system has been
Theft Alarm Notification can send you an email or text
set-off.
message (SMS) should the alarm go off. The following
Description
instructions will help you manage your notifications.
The Theft Alarm Notification feature notifies you via
1. Log on to the Mopar Owner Connect website
email or text message (SMS) when the vehicle’s factory(moparownerconnect.com) using the username and
installed theft alarm system has been set-off. You’ve
password you used when registering your Uconnect®
probably seen this before, a vehicle’s alarm goes off in a
Access system.
parking lot or out on the street, and the owner is nowhere
• If you forgot your username or password, links are
to be found. With Theft Alarm Notification your vehicle
provided on the website to help you retrieve them.
will alert you of the situation.
ALL ABOUT Uconnect® ACCESS 69
2. Once logged in you will find yourself on the Dash- 7. You’re all set. Should your theft alarm go off, a
board. Click on the “Edit Profile” button in the uppernotification(s) will be sent to the number(s) and/or
right corner of the page.
email(s) you provided.
3. Click on the “Notifications” tab on the left side of the Requirements
page.
• Vehicle must be properly equipped with the
Uconnect® Access System and a factory installed Theft
4. If you have more than one vehicle with Uconnect®
Alarm system.
Access, please select which vehicle you want to manage notifications for using the drop down menu.
• Vehicle must be in range of a usable and authorized 3G
cellular signal.
5. You can enter up to five mobile phone and/or email
addresses to your notifications, and you can customize • Vehicle must be registered with Uconnect® Access and
which ones receive the types of messages.
have an active subscription that includes the applicable feature or App.
6. You will receive a confirmation text message, asking to
confirm and receive vehicle notifications. If you are ok
• Owner must properly set-up notification to have the
with this, reply to the text message saying “yes”
Theft Alarm Notification sent to an appropriate mobile
(message and data rates may apply, please see your
phone or email account.
mobile phone provider for details). If you have questions, text “HELP” in your reply.
3
70 ALL ABOUT Uconnect® ACCESS
CAUTION!
In the event your theft alarm is activated, use
caution and evaluate the situation from a safe
distance. If any unauthorized or suspicious person
is near or inside of your vehicle, immediately
contact the police. Do not do anything that could
jeopardize your safety or the safety of those
around you.
2. How can I change where I receive notifications? You
can manage your notifications by going to the Mopar
Owner Connect website (moparownerconnect.com)
and log in with your username and password. Once
there, you can click on “Edit Profile”, then the “Notifications” tab.
3. Can I receive a text message (SMS) when my Theft
Alarm goes off? Yes. Text messages are a convenient
and quick way to receive notifications. You can manage your notifications by going to the Mopar Owner
FAQs
Connect website (moparownerconnect.com) and log
1. What do I do if my Theft Alarm goes off? In the event
in with your username and password. Once there, you
your theft alarm is activated, use caution and evaluate
can click on “Edit Profile”, then the “Notifications” tab
the situation from a safe distance. If any unauthorized
to add, remove and edit your notification options.
or suspicious person is near or inside of your vehicle,
immediately contact the police. Do not do anything
that could jeopardize your safety or the safety of those
around you.
ALL ABOUT Uconnect® ACCESS 71
Stolen Vehicle Assistance is a secure process that can only
If your vehicle is ever stolen, this App (with your be done with your permission. Law enforcement gets
permission) can provide its location to the law enforce- involved only after you file a stolen vehicle report with
them.
ment to help them track it down.
Stolen Vehicle Assistance
Description
How It Works
If your vehicle is stolen, contact local law enforcement 1. If your vehicle is stolen, contact local law enforcement
as soon as possible. They will work with you to file a
immediately to file a stolen vehicle report. Once this report
stolen vehicle report.
has been filed with law enforcement and you have also
notified Uconnect® Care that you have filed the report, 2. Next, inform Uconnect® Care that your vehicle has
Uconnect® Care can help locate your vehicle. The
been stolen. Uconnect® Care can be reached by calling
Uconnect® Care Agent will ask for the stolen vehicle report
855-792-4241. The Uconnect® Care Agent will ask for
number issued by local law enforcement. Then, using GPS
the stolen vehicle report number (as issued by your
technology and the built-in wireless connection within
local law enforcement).
your vehicle, the Uconnect® Care Agent will be able to
If you have downloaded the Uconnect® Access App,
locate the stolen vehicle and work with law enforcement to
you can push the “Operator” button on your smarthelp recover it. (Vehicle must be within the United States,
phone and select “Uconnect® Care” to make the call.
have network coverage and must be registered with
Uconnect® Access with an active subscription that includes
the applicable feature).
3
72 ALL ABOUT Uconnect® ACCESS
3. Uconnect® Care will authenticate that you are the Disclaimers
owner of the vehicle and contact the law enforcement
• No security system is invincible, and vehicle thieves
with whom you filed the stolen vehicle report.
may develop ways to prevent your vehicle from being
located.
4. Uconnect® Care will work with your local law enforcement to track and attempt to recover the vehicle. FAQs
You will be contacted by law enforcement if your
vehicle is recovered. While the investigation is ongo- 1. What do if my vehicle is stolen? First, call local law
enforcement as soon as possible. They will work with
ing, you should also contact your insurance company
you to file a stolen vehicle report. Then call Uconnect®
to inform it of the situation.
Care at 855-792-4241 and inform Uconnect® Care that
Requirements
your vehicle has been stolen and that you have filed a
stolen vehicle report with law enforcement. Uconnect®
• Vehicle must be properly equipped with the Uconnect®
Access System.
Care will help you through the process.
• Vehicle must be in range of a usable and authorized 2. Can someone track my vehicle? To ensure your
cellular signal.
privacy, and the privacy of others using your vehicle,
you must involve local law enforcement to have
• Vehicle must be registered with Uconnect® Access and
Uconnect® locate your vehicle. This helps to ensure
have an active subscription that includes the applicable feature or App.
ALL ABOUT Uconnect® ACCESS 73
that someone is not tracking your vehicle for purposes WiFi Hotspot
other than at your request to locate it in the event it is
stolen.
3. How will I know if my vehicle is recovered? After
you provide the Uconnect® Care Agent with the
stolen vehicle report, the agent will work together
with law enforcement to try to locate your vehicle. If
your vehicle is recovered, you will be contacted by law
enforcement.
4. Can Uconnect® Access lower my insurance rates?
Some insurance providers offer lower rates on vehicles
equipped with systems that can deter auto theft. When
shopping for insurance, be sure to inform your insurance provider of your Uconnect® Access system (Stolen Vehicle Assistance requires a subscription), to find
out if your insurance provider offers a lower rate if
your vehicle is equipped with Uconnect® access and
you have an active subscription.
Create A 3G WiFi Hotspot For Use In
Your Vehicle
3
Description
WiFi Hotspot is on-demand WiFi + 3G connectivity that’s
built-in and ready to go whenever you are. Once your
vehicle is registered for Uconnect® Access, you can
purchase a WiFi Hotspot subscription at the Uconnect®
Store. After you’ve made your purchase, turn on your
signal and connect your devices.
74 ALL ABOUT Uconnect® ACCESS
WARNING!
• Do Not use the WiFi Hotspot while operating the
vehicle. Only use the WiFi Hotspot when it is safe
to do so.
• Driving while distracted can result in loss of vehicle control, accident and injury.
How It Works
The WiFi Hotspot feature provides the vehicle passengers
with an internet access hot spot in the vehicle, using the
radio as an access point. The hot spot will allow WiFi
enabled in-vehicle devices (such as a laptop or any other
portable enabled media device) to wirelessly connect to
the internet.
• Enables all your passengers to be simultaneously Give it a Try!
connected to the web.
1. Purchase a subscription to the WiFi Hotspot feature
for a day, a week, or a month. You can buy WiFi
• Connect several devices at one time.
Hotspot in one of two ways:
• Any WiFi-enabled device — such as a laptop or any
• From your in-vehicle touchscreen (Apps > All
other portable enabled media can connect over your
Apps > Uconnect® Store)
private in-vehicle network.
• From the Mopar Owner Connect website
• A high-speed, secured connection lets anyone on your
(moparownerconnect.com) > Shop > Uconnect®
private network access the Web — great for working
Store.
and relaxing
ALL ABOUT Uconnect® ACCESS 75
NOTE: You must set up your Uconnect® Payment Account
on the Mopar Owner Connect website and establish a
Uconnect® Payment PIN to purchase WiFi Hotspot.
2. After purchasing WiFi Hotspot, it will be enabled/
turned on in your vehicle. The WiFi Hotspot App can
be found on your in-vehicle touchscreen by selecting
Apps > All Apps > WiFi Hotspot.
3
76 ALL ABOUT Uconnect® ACCESS
3. WiFi Hotspot should be turned on after purchasing a 4. From your in-vehicle touchscreen, select the approprisubscription. To disable WiFi Hotspot, simply press to
ate in-vehicle network and the desired security level
uncheck the box to the right of the App (this feature is
setting. Each security level has different pass phrase
available while the vehicle is in motion).
Optional: Give your hot spot a unique name by
pressing Hotspot Name (key pad is not available
while vehicle is in motion).
ALL ABOUT Uconnect® ACCESS 77
constraints. Change the security level setting by select- You are now connected!
ing the checkbox for any of the following security
NOTE: Refer to your device’s owner’s manual for spesettings.
cific information related to your device.
• WPA2/WPA — “WiFi Protected Access” – This is the
default security and can be changed by pressing
WiFi Hotspot > View/Edit Pass phrase.
• WEP — “Wired Equivalent Privacy” – Pass phrase
must be 13 characters long.
• None — No security, will not prompt you for a pass
phrase, when you attempt to connect to WiFi
Hotspot.
5. From your Wi-Fi enabled device (laptop, tablet, etc.)
• Search for and select the Uconnect® hotspot in the
settings of your device
• Type the network security key (this is called “pass
phrase” and is found in Apps > All Apps > WiFi
Hotspot > View/Edit Pass phrase)
• Click OK
3
78 ALL ABOUT Uconnect® ACCESS
• Vehicle must be registered with Uconnect® Access and
have an active WiFi Hotspot subscription ( WiFi Outpost will be turned off if there is no active
subscription).
• Vehicle must be in the ON/RUN or ACC (Accessory)
position and have a properly operating electrical system for any of the in-vehicle Uconnect® features to
function.
Disclaimers
• Factors affecting the performance of WiFi Hotspot
include: cellular network signal strength and quality,
Requirements
time of day, number of channels used by the service
provider, type of connection, number of clients using
• Vehicle must be properly equipped with the
WiFi Hotspot and client device.
Uconnect® 6.5A or 6.5AN.
• Vehicle must be in active and usable range of autho- • WiFi Hotspot does not enable direct communication
between multiple in-vehicle devices.
rized 3G wireless signal (802.11G, 54 Mbps).
ALL ABOUT Uconnect® ACCESS 79
• While the vehicle is in motion it is possible to enable or Tips And Shortcuts
disable the WiFi Hotspot. Simply press to check or
• Give your WiFi Hotspot a unique name by pressing
uncheck the box to the right of the App.
“Hotspot Name” within the WiFi Hotspot App.
• For your own safety, it is not possible to use some of
• To view a list of connected devices, press “View
the touchscreen features while the vehicle is in motion.
Connected Devices” within the WiFi Hotspot App
The key pad is not available while the vehicle is in
when the hot spot is turned on.
motion.
• If WiFi Hotspot Off is shown, then WiFi is not activated (must be On for connectivity to be enabled.)
CAUTION!
ALWAYS drive safely with your hands on the wheel.
You have full responsibility and assume all risks
related to the use of the Uconnect® features and
applications in this vehicle. Only use Uconnect®
when it is safe to do so. Failure to do so may result in
an accident involving serious injury or death.
• If Enable WiFi Hotspot is unchecked, then WiFi is not
activated.
• To quickly enable or disable WiFi Hotspot, press to
check or uncheck the box to the right of the App.
3
80 ALL ABOUT Uconnect® ACCESS
4. What if I want to create a custom password for my
connection? Select either WPA2/WPA or the WEP
1. How do I know if I have a good signal strength?
setting and create a pass phrase by pressing Apps >
There is a signal strength indicator on the Apps button
All Apps > WiFi Hotspot > View/Edit Pass phrase.
of the radio touchscreen.
5. I do not see the connection on my wireless laptop or
2. What do I do if the WiFi Hotspot connection drops
phone, what should I do? Refer to your device’s
while I’m driving? The connection will be automatic
owner’s manual for specific information related to
when you enter an area with cellular coverage. Factors
your device.
affecting the performance of WiFi Hotspot include:
cellular network signal strength and quality, time of 6. Are there any data constraints with WiFi Hotspot?
day, number of channels used by the service provider,
WiFi Hotspot must be purchased in either one day, one
type of connection, number of client using WiFi
week or one month durations.
Hotspot, client device.
FAQs
3. What is the factory default security setting? WPA2/
WPA
ALL ABOUT Uconnect® ACCESS 81
UconnectPhone.com. iPhone® and some other smartAdd Free-Form Voice Texts To Your Voice Text Reply phones do not currently support Bluetooth® MAP. Ensure MAP is ON and incoming message notification is
Feature
enabled.
Description
How It Works
This Voice Texting enhances the Voice Text Reply feature
built into your Uconnect® Access 6.5A and 6.5AN radio. Set Up Your Phone To Work With Voice Texting
While Voice Text Reply provides 18 pre-defined messages After pairing your phone to the vehicle using Bluetooth®
you can send, Voice Texting lets you create and send (see UconnectPhone.com), push the “phone” button on
nearly any message you want. Just speak your message the menu bar of the radio to see the main Phone screen.
as if you were talking to the recipient, and the Uconnect® A minute or so after a compatible MAP enabled phone
Access voice-texting technology will convert your voice has been Bluetooth® connected to the vehicle; the “messaging” button on the touchscreen will change from gray
into a text message.
to white. This is an indicator that Voice Texting will work
Voice Texting and Voice Text Reply features are compatwith your phone. Outgoing voice texts may not be
ible with many newer Android and Blackberry phones.
possible. The phone may allow incoming texts only.
Before using, determine if your phone has been tested to
support Bluetooth® “Message Access Profile (MAP)” at
Voice Texting
3
82 ALL ABOUT Uconnect® ACCESS
NOTE: If phone supports MAP, then ensure MAP is on
and incoming message notification is enabled, (see
UconnectPhone.com for phone specific instructions).
Generic Phone Setup Instructions (your phone’s setup
process may be similar):
Follow the steps below to see if your phone can set up to
work with Voice Texting.
1. On your phone select “Settings” (or the equivalent on
your phone)
2. Select Wireless/Bluetooth® settings
Determine if your phone has been tested to support
Bluetooth® “Message Access Profile” (MAP) at
UconnectPhone.com. (Your phone may support Voice
Texting even if not found on this website. Check with
your phone manufacturer to see if it supports MAP
protocol.)
3. Ensure Bluetooth® is on (box checked)
4. Select Bluetooth® settings
5. Select Advanced setting
6. Ensure Message Access service is on (box checked)
7. Select Message Access settings
ALL ABOUT Uconnect® ACCESS 83
8. Check the box for SMS
5. When finished dictating, wait for prompt and say
“Send.”
9. Hit the back button twice to return to the Bluetooth®
Dictate A Free-Form Reply To A Message From Radio
settings screen
(Voice Text Reply)
10. Check the box for Discoverable
1. Say “Reply to message n”
If a Bluetooth® authorization window appears showing
n = the number of the message
your phone requesting permissions, check the box for
Always and press Accept.
OR
Sending A New Text Message From Radio
Press “Reply” after viewing message
1. Push
on the steering wheel.
2. Say “Send text message.”
OR
Push the phone button and say “Reply.”
3. The system will respond “Say the phone number or 2. The system will say “Please say the message you want
the full name and the phone type of the contact that
to send.” (“I will be home at eight.”)
you want to send a message to.”
3. Say the message you want to send up to 160 characters
4. Dictate message (“I will be home at eight.”)
of text.
3
84 ALL ABOUT Uconnect® ACCESS
4. The system will repeat the message you dictated and To Reply To A Message With A Pre-Formatted Restate available commands. If your message was too sponse (Voice Text Reply)
long, the system will respond with “Your message was
too long. Your message was truncated.” Say “Send,” or
“Start Over” or “Continue.”
5. Say “Continue”
OR
Say “Start over”
OR
Say “Repeat”
OR
Say “Send”
OR
NOTE: This function only operates while the vehicle is
not in motion.
Say “Cancel.”
1. Press “View” next to the message
2. Press “Reply”
ALL ABOUT Uconnect® ACCESS 85
3. Select the pre-formatted response by pressing it Viewing Your Messages
(“I can’t talk right now”)
1. Push the “Phone” button on the steering wheel.
4. Press “Send”
Viewing Or Listening To Incoming Messages
To Listen to a Message from Radio
1. Push the #Phone# button on the steering wheel. Say
$Listen to message$
OR
Press the #Listen# button on the touchscreen.
3
86 ALL ABOUT Uconnect® ACCESS
2. Say “View message.”
OR
Press “View” on the in-vehicle touchscreen.
Viewing A Specific Message
1. Press “View” next to the contact name/phone number
of the message you want to be displayed.
OR
Say “Show message n”
n = the number of the message
Listening To A Message
1. Press “Listen” on the touchscreen or push the “Phone”
button on the steering wheel and say “Listen,” the
Uconnect® system will read the received text message
over the vehicle audio system.
Contact names or phone numbers of the message
sender appears in a list along with View and Listen
buttons on the touchscreen.
ALL ABOUT Uconnect® ACCESS 87
Barge-In
• Vehicle must be registered with an active Uconnect®
Access Advantage trial or paid subscription for free
form text response to work.
Barge-in is a feature that enables a user to say a valid
command without waiting for the system to finish speaking.
button • Vehicle and phone must be in range of the cellular
When the system is “speaking” you can push the
on the steering wheel and say a valid command.
network.
For example, if the system is explaining all of the options • Customer must have a properly paired and connected
available after dictating a text message, at any time the
cellular device with Bluetooth® Message Access Prouser can press #Listen# on touchscreen or push the
file (MAP) enabled. Voice Texting is compatible with
#Phone# button on the steering wheel and say #Listen.#
many newer BlackBerry and Android mobile devices.
Apple iOS 5 and earlier does not support MAP so
Requirements
iPhones will not send free form text messages. Apple
• (MAP may not be compatible with Apple iPhones® (pre
iOS 6 supports receiving, not sending text messages.
iOS 6). Apple iOS 6 supports receiving text messages,
To check if your device has been tested to be compatbut does not support sending text messages).
ible please visit UconnectPhone.com.
• Available on vehicles sold in the United States with a
Uconnect® 6.5A (sales code RA3) or Uconnect® 6.5AN
(sales code RA4) radio equipped with Uconnect®
Access.
3
88 ALL ABOUT Uconnect® ACCESS
Disclaimers
• Not all Voice Texting features may be available on your
phone.
• Your MAP supported phone must be paired and
connected to a compatible Uconnect® radio.
• You must have an active cellular connection and be
within cellular range to voice text.
WARNING!
ALWAYS drive safely with your hands on the
steering wheel. You have full responsibility and
assume all risks related to the use of the
Uconnect® features and applications in this vehicle. Only use Uconnect® when it is safe to do so.
Failure to do so may result in an accident involving serious injury or death.
• Chrysler Uconnect® and its affiliates are not responFAQs
sible for errant text messages.
• Vehicle must be registered with an active Uconnect® 1. Can I still voice text if my phone is not listed? We are
constantly testing phones and updating our compatAccess trial or paid subscription.
ibility database. If your phone is not listed, you may
still be able to pair and connect your MAP supported
phone to a compatible Uconnect® radio to see if all or
most voice texting functions work. Check your phone
manufacturer if MAP is supported on your phone.
ALL ABOUT Uconnect® ACCESS 89
2. Can I use voice texting while in my other Chrysler 5. Can a passenger voice text? Yes, however, voice
recognition microphones are optimized for the driver,
vehicle? The Voice Texting free text response feature is
so the system may have difficulty hearing the passenavailable only on Uconnect® 6.5A (sales code RA3) or
ger; also, the system will use the currently connected
Uconnect® 6.5AN (sales code RA4) radios. Other
phone, so be sure your passenger isn’t sending texts to
Chrysler vehicles do support hands free texting, but
the wrong recipient.
only with fixed responses.
3. My “Messaging” button on the touchscreen is White, 6. Does Voice Texting work with accents? Speech isn’t
perfect. Technology isn’t perfect. While Chrysler
but I can only use pre-formatted responses. The Voice
strives to use the latest voice recognition engine, the
Texting free-form voice response requires a subscriptechnology may have difficulty with strong accents.
tion to the Uconnect® Access Advantage package.
(Some phones will support pre-formatted responses,
7. Can I voice text my car? The Voice Texting feature
but not free-form. Refer to UconnectPhone.com for
allows you to listen to, and reply to text messages
further details.)
(SMS) sent to your portable cellular mobile phone by
4. Do I have to “train” my Uconnect® radio to my
voice while in your vehicle.
voice? Chrysler uses the latest voice recognition en8. How many pre-formatted replies are there? You can
gine that provides good recognition without required
respond with a set of up to 18 preset outgoing
training. This makes it easier for a passenger to also
messages such as #I’ll call you later.” Refer to “Voice
use the system.
Texting” section of this supplement.
3
90 ALL ABOUT Uconnect® ACCESS
9. Can I use abbreviations and emoticons? Of course! Remote Door Lock/Unlock
Just say the name of the most popular emoticon or Lock Or Unlock Your Vehicle From Virtually Anywhere
abbreviation, e.g. smiley, frown, wink, & LOL.
Using Your Computer Or Smartphone App.
10. Can I use Text Messaging if the “messaging” button Description
doesn’t turn white? Only MAP compatible phones
will work with Text Messaging. If your phone is The Remote Door Lock/Unlock feature provides you the
compatible, the “messaging” light will turn white, ability to lock or unlock the door on your vehicle,
after the phone is Bluetooth® connected, and you without the keys and from virtually any distance. You
will then be able to do hands free Text Messaging. can send a request to your vehicle in one of three ways:
The system will respond with “Sorry, I didn’t under- • Using the Uconnect® Access App from a compatible
stand you” if you push the steering wheel “Phone”
smartphone
button and say a voice command for Text Messaging,
• From the Mopar® Owner Connect website
when the button isn’t active (“white”).
(moparownerconnect.com)
• Contacting Uconnect® Care
If you want, you can set up notifications for your account
to receive an email or text (SMS) message every time a
command is sent to lock or unlock your doors.
ALL ABOUT Uconnect® ACCESS 91
How It Works
Uconnect® Access App:
1. Download the Uconnect® Access App to a compatible
smartphone and login using your username and password.
3
2. To lock the doors, push the button with the closed lock
icon; to unlock the driver’s door push the button with
the open lock icon.
3. A pop-up screen will appear asking for your
Uconnect® Security PIN (this is the same 4- digit code
established when your registered your Uconnect®
Access system). Enter the Uconnect® Security PIN on
the keypad and press “OK.”
92 ALL ABOUT Uconnect® ACCESS
4. The Uconnect® Access App will confirm if your NOTE: If you forgot your username or password, links
command was sent (or not). Press “OK” to close the are provided on the website to help you retrieve them.
pop-up screen.
2. If you have more than one vehicle registered
into the Mopar® Owner Connect website
5. It will take a little while for the command to go
(moparownerconnect.com), select the vehicle you
through to your vehicle. The time it takes depends on
want to send the command by clicking on its image
a number of technical conditions.
along the top.
6. A message will appear on the screen to let you know
3. Beneath the image of a vehicle like yours, you will see
if the command was received by your vehicle.
a row of icons. To lock the doors, click on the closed
Mopar® Owner Connect website:
lock icon; to unlock the driver’s door click on the
1. Log on to the Mopar® Owner Connect website
“open lock icon.”
(moparownerconnect.com) using the username and
password you used when registering your Uconnect®
Access system.
ALL ABOUT Uconnect® ACCESS 93
Uconnect® Care:
1. If you need to unlock the doors of your vehicle,
contact Uconnect® Care by calling 855-792-4241.
NOTE: The Uconnect® Care agents are trained to help
you with unlocking of your door (for example, in an
accidental lock-out). All other Remote Services should be
performed via the Mopar® Owner Connect website
(moparownerconnect.com) or through the Uconnect®
Access App on your compatible smartphone.
4. You will then be asked to enter your Uconnect®
Security PIN (this is the same 4-digit code established
when your registered your Uconnect® Access system).
Please enter your Uconnect® Security PIN.
5. A message will appear on the screen to let you know
if the command was received by your vehicle.
CAUTION!
Must be registered with Uconnect® access and
have a current subscription.
2. For security purposes, the Uconnect® Care agent will
verify your identity by asking for your 4-digit
Uconnect® Security PIN.
3
94 ALL ABOUT Uconnect® ACCESS
3. After providing your Uconnect® Security PIN, you • Your request will typically take about to 3 minutes to
process. If your vehicle has been parked for a while it
can ask them to lock or unlock your vehicle. The agent
can take up to 30 minutes for the request to reach your
will send a command to your vehicle to get the task
vehicle and perform the task.
done.
Give It A Try!
Requirements
• Download the Uconnect® Access App to your smart- • Vehicle must be properly equipped with the
Uconnect® Access System.
phone.
• Enter the username and password that you • Vehicle must be in range of a usable and authorized
cellular signal.
established for the Mopar® Owner Connect website
(moparownerconnect.com) during registration of
• Vehicle must be registered with Uconnect® Access and
your new vehicle.
have an active subscription that includes the appli• If logging in for the first time, you will be asked to
cable feature or App.
agree to the Terms of Service.
• If using the Uconnect® Access App to command your
• Push the button to unlock your vehicle’s door, you will
vehicle, your smartphone must be compatible and in
then be asked to enter your Uconnect® Security PIN.
range of a cellular signal.
ALL ABOUT Uconnect® ACCESS 95
• An ignition cycle is required for some remote com- 3. Will my vehicle be safe if I lose my smartphone?
mands such as Remote Vehicle Start and Remote Door
People sometimes lose their phone, which is why
Lock/Unlock if following a Remote Horn and Lights
security measures have been engineered into the
activation.
Uconnect® Access App. Asking for your username,
password and Uconnect® Security PIN help to ensure
FAQs
that nobody can get into your vehicle if they happen to
1. How long does it take to unlock or lock the door?
find your smartphone.
Depending on various conditions, it can take three
4. Why can’t all phones use the Uconnect® Access
minutes or more for the request to get through to your
App? The Uconnect® Access App has been designed
vehicle, although Uconnect® is always striving to
to work on most smartphones with the Apple and
improve performance.
Android operating systems. The capabilities of these
2. Which is faster, my Key Fob or the Uconnect® Access
smartphone allows us to remotely command your
App? Your Key Fob will lock/unlock the door quicker,
vehicle. Other operating systems may be supported in
however its range is limited and it can sometimes get
the future.
misplaced or locked in the vehicle. Your Uconnect®
Access App comes in handy for these and other
situations.
3
96 ALL ABOUT Uconnect® ACCESS
5. Why is the Uconnect® Access App running slow?
The Uconnect® Access App relies on the cellular
connection from your smartphone to send commands
to your vehicle. If your smartphone is in an area with
below average coverage, it will take longer to log in
and send commands.
Remote Vehicle Start
cool-down the interior before you have to get in. You can
send a request to your vehicle in one of two ways:
• Using the Uconnect® Access App from a compatible
smartphone.
• From the Mopar Owner
(moparownerconnect.com).
Connect
website
You can also send a command to turn-off an engine that
Use Your Computer Or Smartphone App To Start The
has been remote started. After 15 minutes if you have not
Engine And Warm-Up Or Cool-Down The Vehicle
entered your vehicle with the key, the engine will shut off
From Almost Anywhere.
automatically.
Description
This remote function requires your vehicle to be
The Remote Vehicle Start feature provides you with the equipped with a factory-installed Remote Start system.
ability to start the engine on your vehicle, without the
If you want, you can set-up notifications for your account
keys and from virtually any distance. Once started, the
to receive an email or text (SMS) message every time a
pre-set climate controls in your vehicle can warm-up or
command is sent to remote start or cancel a remote start.
ALL ABOUT Uconnect® ACCESS 97
How It Works
Uconnect® Access App:
1. Download the Uconnect® Access App to a compatible
smartphone and login using your username and password.
3
2. To start the engine, press the “circular arrow”, to
turn-off an engine that has been remote started press
the “cancel” button.
3. A pop-up screen will appear asking for your
Uconnect® Security PIN (this is the same 4- digit code
established when your registered your Uconnect®
Access system). Enter the Uconnect® Security PIN on
the keypad and press “OK.”
98 ALL ABOUT Uconnect® ACCESS
4. The Uconnect® Access App will confirm if your NOTE: If you forgot your username or password, links
command was sent (or not). Press “OK” to close the are provided on the website to help you retrieve them.
pop-up screen.
2. If you have more than one vehicle registered into the Mopar
Owner Connect website (moparownerconnect.com), se5. It will take a little while for the command to go
lect the vehicle you want to send the command by
through to your vehicle. The time it takes depends on
clicking on its image along the top.
a number of technical conditions.
6. A message will appear on the screen to let you know 3. Beneath the image of a vehicle like yours, you will see
a row of icons. To start the engine, press the “circular
if the command was received by your vehicle.
arrow”, to turn-off an engine that has been remote
Mopar Owner Connect website:
started press the “cancel” button.
1. Log on to the Mopar Owner Connect website
(moparownerconnect.com) using the username and
password you used when registering your Uconnect®
Access system.
ALL ABOUT Uconnect® ACCESS 99
Uconnect® Care:
1. If you need to unlock the doors of your vehicle,
contact Uconnect® Care by calling 855-792-4241.
NOTE: The Uconnect® Care Agents are trained to help
you with unlocking of your door (for example, in an
accidental lock-out). All other Remote Services should be
performed via the Mopar Owner Connect website
(moparownerconnect.com) or through the Uconnect®
Access App on your compatible smartphone.
2. For security purposes, the Uconnect® Care Agent will
verify your identity by asking for your 4-digit
4. You will then be asked to enter your Uconnect®
Uconnect® Security PIN.
Security PIN (this is the same 4-digit code established
when your registered your Uconnect® Access system). 3. After providing your Uconnect® Security PIN, you
Please enter your Uconnect® Security PIN.
can ask them to lock or unlock your vehicle. The agent
will send a command to your vehicle to get the task
5. A message will appear on the screen to let you know
done.
if the command was received by your vehicle.
3
100 ALL ABOUT Uconnect® ACCESS
Give It A Try!
Requirements
• Download the Uconnect® Access App to your smart- • Vehicle must be properly equipped with the
Uconnect® Access System and factory installed Rephone.
mote Start capabilities.
• Enter the username and password that you
established for the Mopar Owner Connect website • Vehicle must be in range of a usable and authorized
cellular signal.
(moparownerconnect.com) during registration of
your new vehicle.
• Vehicle must be registered with Uconnect® Access and
• If logging in for the first time, you will be asked to
have an active subscription that includes the appliagree to the Terms of Service.
cable feature or App.
• Press the button to start your vehicle’s engine.
• If using the Uconnect® Access App to command your
vehicle, your smartphone must be compatible and in
• Your request will typically take about to three minutes
range of a cellular signal.
to process. If your vehicle has been parked for a while
it can take up to 30 minutes for the request to reach • An ignition cycle is required for some remote comyour vehicle and perform the task.
mands such as Remote Vehicle Start and Remote Door
Lock/Unlock if following a Remote Horn and Lights
activation.
ALL ABOUT Uconnect® ACCESS 101
FAQs
1. How long does it take to remote start my vehicle?
Depending on various conditions, it can take three
minutes or more for the request to get through to your
vehicle, although Uconnect® is always striving to
improve performance.
4. Can someone drive off with my vehicle using the
App? No. Driving your vehicle still requires the keys
to be in the vehicle. The Remote Start feature simply
starts the engine to warm-up or cool down the interior
before you arrive, you cannot drive away without the
keys.
2. Which is faster, my Key Fob or the Uconnect® Access 5. Can I stop a vehicle that is being driven by canceling
the engine start command? No. If a vehicle is driving
App? Your Key Fob will remote start your vehicle
down the road the cancel Remote Start button will not
quicker, however its range is limited. For example,
stop it. It simply cancels or ends a Remote Start of the
when you are leaving the stadium after the game, you
engine.
can remote start your vehicle to have the inside
comfortable before you even get there.
6. Why can’t all phones use the Uconnect® Access
App? The Uconnect® Access App has been designed
3. Will my vehicle be safe if I lose my smartphone?
People sometimes lose their phone, which is why
to work on most smartphones with the Apple and
security measures have been engineered into the
Android operating systems. The capabilities of these
Uconnect® Access App. Asking for your username,
smartphone allows us to remotely command your
password and Uconnect® Security PIN help to ensure
vehicle. Other operating systems may be supported in
that nobody can start your vehicle if they happen to
the future.
find your smartphone.
3
102 ALL ABOUT Uconnect® ACCESS
If you want, you can set-up notifications for your account
to receive an email or text (SMS) message every time a
Can’t Find Your Vehicle In The Parking Lot? Sound The
command is sent to turn on the horn and lights.
Horn And Flash The Lights On Your Vehicle To Locate It.
How It Works
Description
It is easy to locate a vehicle in a dark, crowded or noisy 1. Download the Uconnect® Access App to a compatible
smartphone and login using your username and passparking area by activating the horn and lights. It may
word.
also help if you need to draw attention to your vehicle for
Remote Horn And Lights
any reason. You can send a request to your vehicle in one 2. To turn on the horn and lights, press the “trumpet
of three ways:
icon.” To turn-off the horn and lights, press the
“trumpet icon” again.
• Using the Uconnect® Access App from a compatible
smartphone
• From the Mopar Owner
(moparownerconnect.com)
• Contacting Uconnect® Care
Connect
3. A pop-up screen will appear asking for your
Uconnect® Security PIN (this is the same 4- digit code
website
established when your registered your Uconnect®
Access system). Enter the Uconnect® Security PIN on
the keypad and press “OK.”
ALL ABOUT Uconnect® ACCESS 103
4. The Uconnect® Access App will confirm if your Mopar Owner Connect website:
command was sent (or not). Press “OK” to close the
1. Log on to the Mopar Owner Connect website
pop-up screen.
(moparownerconnect.com) using the username and
password you used when registering your Uconnect®
5. It will take a little while for the command to go
Access system.
through to your vehicle. The time it takes depends on
a number of technical conditions
• If you forgot your username or password, links are
provided on the website to help you retrieve them.
6. A message will appear on the screen to let you know
if the command was received by your vehicle.
2. If you have more than one vehicle registered into the Mopar
Owner Connect website (moparownerconnect.com), select the vehicle you want to send the command by
clicking on its image along the top.
3
104 ALL ABOUT Uconnect® ACCESS
3. Beneath the image of a vehicle like yours, you will see 4. You will then be asked to enter your Uconnect®
a row of icons. To turn on the horn and lights, press the
Security PIN (this is the same 4-digit code established
“trumpet icon.” To turn off the horn and lights, press
when your registered your Uconnect® Access system).
the “trumpet icon” again.
Please enter your Uconnect® Security PIN.
5. A message will appear on the screen to let you know
if the command was received by your vehicle.
Uconnect® Care:
1. If you need to unlock the doors of your vehicle,
contact Uconnect® Care by calling 855-792-4241.
NOTE: The Uconnect® Care agents are trained to help
you with unlocking of your door (for example, in an
accidental lock-out). All other Remote Services should be
performed via the Mopar Owner Connect website
(moparownerconnect.com) or through the Uconnect®
NOTE: A quicker way to turn off your Remote Horn and Access App on your compatible smartphone.
Lights would be to push the “Panic” button on your Key
Fob if you are near the vehicle.
ALL ABOUT Uconnect® ACCESS 105
2. For security purposes, the Uconnect® Care agent will • Push the button to sound your vehicle’s horn and flash
the lights.
verify your identity by asking for your 4-digit
Uconnect® Security PIN.
• Your request will typically take about to three minutes
to process. If your vehicle has been parked for a while
3. After providing your Uconnect® Security PIN, you
it can take up to 30 minutes for the request to reach
can ask them to lock or unlock your vehicle. The agent
your vehicle and perform the task.
will send a command to your vehicle to get the task
done.
Requirements
Give It A Try!
• Download the Uconnect® Access App to your smartphone.
• Vehicle must be properly equipped with the
Uconnect® Access System.
• Vehicle must be in range of a usable and authorized
cellular signal.
• Enter the username and password that you
established for the Mopar Owner Connect website
• Vehicle must be registered with Uconnect® Access and
(moparownerconnect.com) during registration of
have an active subscription that includes the appliyour new vehicle.
cable feature or App.
• If logging in for the first time, you will be asked to
agree to the Terms of Service.
3
106 ALL ABOUT Uconnect® ACCESS
• If using the Uconnect® Access App to command your FAQs
vehicle, your smartphone must be compatible and in
1. How long does it take to sound my horn and flash
range of a cellular signal.
the lights? Depending on various conditions, it can
• An ignition cycle is required for some remote comtake three minutes or more for the request to get
mands such as Remote Vehicle Start and Remote Door
through to your vehicle, although Uconnect® is alLock/Unlock if following a Remote Horn and Lights
ways striving to improve performance.
activation
2. Which is faster, my Key Fob or the Uconnect® Access
App? Your Key Fob will sound the horn and flash the
CAUTION!
lights quicker; however its range is limited.
The Remote Horn and Lights feature is designed
to be loud and get noticed. Please keep in mind the
surroundings when using this feature.
3. Will my vehicle be safe if I lose my smartphone?
People sometimes lose their phone, which is why
security measures have been engineered into the
Uconnect® Access App. Asking for your username,
password and Uconnect® Security PIN help to ensure
that nobody can access your vehicle if they happen to
find your smartphone.
ALL ABOUT Uconnect® ACCESS 107
4. How do I turn off the horn and lights after I turn
them on? By pressing the “horn icon” a second time
on your Uconnect® Access App, a second command
will be sent to shutoff the horn and lights. Alternatively, if you are close enough to the vehicle you can
use the Key Fob to turn off the horn and lights by
pressing the “Panic” button.
Via Mobile Apps
5. Why can’t all phones use the Uconnect® Access
App? The Uconnect® Access App has been designed
to work on most smartphones with the Apple and
Android operating systems. The capabilities of these
smartphone allows us to remotely command your
vehicle. Other operating systems may be supported in
the future.
Description
Pandora® — If Equipped
Pandora® gives people the music and comedy they love
anytime, anywhere. Personalized stations launch instantly, with the input of a favorite artist, track, comedian, or genre.
Easily control your Pandora® app through an intuitive
interface via the vehicle touchscreen and steering wheel
controls.
• Reduce the need to use your Smartphone to access
Pandora® so you can stay focused on driving.
• Launch Pandora® using Voice Recognition (VR) via a
button on the steering wheel.
3
108 ALL ABOUT Uconnect® ACCESS
• Pandora® offers personalized radio based on your How It Works
favorite artists, or songs and can create a custom
Via Mobile uses the Uconnect® Access smartphone app
#station# playing similar music. Custom stations are
and your smartphone’s data plan to access your personal
created on the Pandora® website or the mobile app.
Pandora® account from the vehicle and control it using
• Listen to previously created stations in “shuffle” mode the vehicle touchscreen. A compatible smartphone is
required. The Pandora® mobile app on your phone does
• For the best music experience, continuously personalnot need to be launched to use Pandora® Via Mobile.
ize your music using the “Like” or “Dislike” buttons
on the touchscreen whenever a particular song is 1. If you haven’t yet registered with Uconnect® Access,
begin by pushing the “Apps” icon on the touchscreen
played that you want to hear more or less of.
inside your vehicle, and then push “Uconnect Regis• Enjoy a higher quality of music by adjusting the
tration.”
Pandora® settings.
2. Once you receive an email from “Uconnect Access,”
• Customers can leverage an existing Pandora® account,
click on the secure link to complete your registration
or set up a new account on the Pandora® website at
on moparownerconnect.com where you’ll be guided
pandora.com.
through setup of your Via Mobile profile.
• Customers can also create a new Pandora® account by
clicking on a link from the Uconnect® Access Via
Mobile profile page during registration and setup.
ALL ABOUT Uconnect® ACCESS 109
3. Next, link app accounts to your Via Mobile profile by 5. Launch the Uconnect® Access app on your connected
smartphone and log in with your Mopar Owner
entering your login information for Pandora®.
Connect Username/Email and password. From the
If you’ve already registered with Uconnect® Access,
vehicle touchscreen press the “Apps” button and
log in to moparownerconnect.com to set up your Via
select Pandora® from the list. Pandora® is located
Mobile profile. Click on “Via Mobile Profile.”
within the “All Apps” tab. To launch Pandora® using
4. Next, connect your smartphone to the vehicle touchvoice recognition, push the button on the steering
screen. The Uconnect® Access app is compatible with
wheel and say, “launch Pandora Via Mobile.”
select iPhone® and Android smartphones. Visit
UconnectPhone.com to confirm that your smartphone is compatible with Uconnect®. Once you’ve
confirmed your smartphone is compatible, pair it to
the vehicle touchscreen via Bluetooth® to use Via
Mobile apps. If using an iPhone®, a USB cable may
also be supported for the data connection.
3
110 ALL ABOUT Uconnect® ACCESS
Ensure that Via Mobile data has been turned on under
“Settings” in the Uconnect® Access App. A green indicator next to the words “Via Mobile” will show when it is
ready to provide data to the vehicle touchscreen (a blue
indicator when data is being sent). A red indicator means
that it is not ready to provide data.
ALL ABOUT Uconnect® ACCESS 111
NOTE: Many smartphones have a limit to how much
data they can utilize before incurring additional charges.
The amount of data being used varies by smartphone
device, cellular service provider and specific app. Check
your smartphone service plan for more details.
3
Each time you want to use a Via Mobile app in your
vehicle, the Uconnect® Access App must be running on
your smartphone and the smartphone must be paired via
Bluetooth®.
A message will be displayed to remind you that Via Mobile
apps utilize the data plan on your connected smartphone to
provide content. Press “OK” to continue or the “X” to exit.
112 ALL ABOUT Uconnect® ACCESS
2. Select a station from the list, or select “QuickMix” to
listen to your music in shuffle mode.
3. To go back and select a different station, press the
“Station List” button on the touchscreen.
Requirements
• Vehicle must be properly equipped with the
Uconnect® Access System.
Give it a try!
• Your smartphone must be compatible with the
Uconnect® Access App and properly connected to the
vehicle.
• Your connected smartphone must be in range of a
1. From the vehicle touchscreen select Pandora® from
usable cellular signal.
button on the steering
the apps list, or push the
• Vehicle must be registered with Uconnect® Access and
wheel and say, “launch Pandora® Via Mobile.”
have an active subscription that includes the applicable feature or App.
ALL ABOUT Uconnect® ACCESS 113
• Vehicle must be powered in the ON/RUN or ACC FAQs
(Accessory) position with a properly functioning elec1. Why can’t I get Pandora® Via Mobile to work? Here
trical system.
are some things to consider:
• Vehicle must be equipped with Uconnect 6.5A/6.5AN.
• Check to ensure you have linked your Pandora®
Not available on Uconnect 5.0.
account credentials with Uconnect® Access. This is
usually done during registration and setup. Then,
Tips and Shortcuts
check to ensure you have properly connected your
• Pandora® will launch with the last setting and play list
compatible smartphone to the vehicle touchscreen.
you chose. To change this, select the “Station List”
The Uconnect® Access App must be open and you
button on the touchscreen in lower left corner to select
must be logged in. A blue light indicates that it’s
another station.
providing data to the vehicle.
• If you recently changed your password for Pandora®, it
• Steering wheel controls supported are for “next track”
may need to be updated on Mopar Owner Connect
(until reaching maximum skips – for free account).
under the “Via Mobile” section.
2. If I changed my password for Pandora®, do I have
to update it with Uconnect® Access? Yes. Visit
moparownerconnect.com, log in, and click on Via
Mobile.
3
114 ALL ABOUT Uconnect® ACCESS
3. How do I set up a Pandora® account? You can create 6. Can I create a station from within the vehicle using
the vehicle touchscreen? Custom content can only be
an account with Pandora® by visiting pandora.com.
created from the Pandora® website or the Pandora®
To make changes to an existing Pandora® account,
mobile app.
visit the Pandora® website.
4. Can I create a Pandora® account during Uconnect® 7. How do I improve the sound quality within the app
and how will this affect the experience? The default
Access registration and setup? There is a link from the
setting is 32 kbps. Users can increase to 64 kbps by
Via Mobile profile page where the customer can go to
selecting “Pandora Settings” once within the app (icon
the Pandora® website to create a new account.
looks like two gears). This will double the impact to
5. Can I customize my Pandora® stations? The “Thumbs
the user’s data plan and is subject to more playbacks/
up” and “Thumbs down” buttons on the touchscreen
buffering.
are used to personalize stations based on the currently
playing track. Give a track the “thumbs up” to hear 8. How do I block explicit content? Customers have
more tracks with similar qualities, or “thumbs down”
the ability to block explicit content by adjusting
to remove that track from the station and avoid tracks
their settings through the Pandora® website at
pandora.com or through the Pandora® mobile app.
with similar qualities.
ALL ABOUT Uconnect® ACCESS 115
9. Should I have the Pandora® app downloaded to my Description
smartphone to use Pandora® Via Mobile? You do not
• Easily control your iHeartRadio app through an intuineed to have the Pandora® app on your smartphone
tive interface via the touchscreen and steering wheel
to use Pandora® Via Mobile. The Uconnect® Access
controls.
App is required, however.
• Reduce the need to use your Smartphone to access
10. How do I know how much data is being used?
iHeartRadio so you can stay focused on driving.
Uconnect® Access Via Mobile uses your smartphone’s existing data plan to stream content. Data • Leverage an existing iHeartRadio account, or set up a
free account at iHeartRadio.com.
usage varies by phone/device, content (e.g. videos),
high quality audio and several other factors. Please
• Customers can also create a new iHeartRadio account
refer to your device carrier for specific details.
by clicking on a link from the Uconnect® Access Via
iHeartRadio — If Equipped
Mobile profile page during registration and set-up.
iHeartRadio provides instant access to more than 1,500 • Launch iHeartRadio using Voice Recognition (VR) or
live radio stations from across the country and allows
through touchscreen controls.
listeners to create custom music stations inspired by their
• Browse, listen, and save radio stations for easy access.
favorite artists or songs.
• Browse and create custom stations (e.g. Zac Brown
Band).
3
116 ALL ABOUT Uconnect® ACCESS
• Create a new custom station based on what’s currently 1. If you haven’t yet registered with Uconnect® Access,
playing with a single button press.
begin by pressing the “Apps” icon on the touchscreen
inside your vehicle, and then press “Uconnect Regis• Steering wheel controls supported for preset jump and
tration.”
“next track” (until reaching maximum skips).
2. Once you receive an email from “Uconnect Access,”
• Listen to live radio stations from across the U.S.
click on the secure link to complete your registration
• Continually refine stations to your liking using the
on moparownerconnect.com where you’ll be guided
through setup of your Via Mobile profile.
“Thumbs Up” and “Thumbs Down” buttons.
3. Next, link app accounts to your Via Mobile profile by
entering your login information for apps like iHeartVia Mobile uses the Uconnect® Access smartphone app
Radio.
and your smartphone’s data plan to access your personal
If you’ve already registered with Uconnect® Access,
iHeartRadio account from the vehicle and control it using
log in to moparownerconnect.com to set up your Via
the vehicle touchscreen. A compatible smartphone is
Mobile profile. Click on “Via Mobile Profile”.
required. The iHeartRadio mobile app on your phone
does not need to be launched to use iHeartRadio Via
Mobile.
How It Works
ALL ABOUT Uconnect® ACCESS 117
4. Connect your smartphone to the vehicle touchscreen.
The Uconnect® Access app is compatible with
select iPhone® and Android smartphones. Visit
UconnectPhone.com to confirm that your smartphone is compatible with Uconnect®. Once you’ve
confirmed your smartphone is compatible, pair it to
the vehicle touchscreen via Bluetooth® to use Via
Mobile apps. If using an iPhone®, a USB cable may
also be supported for the data connection.
5. Launch the Uconnect® Access app on your connected
smartphone and log in with your Mopar Owner
Connect Username/Email and password. From the
vehicle touchscreen press the “Apps” button and
select iHeartRadio from the list. iHeartRadio is located
within the “All Apps” tab. To launch iHeartRadio
using voice recognition, push the button on the steering wheel and say, “launch iHeartRadio Via Mobile.”
Ensure that Via Mobile data has been turned on under
“Settings” in the Uconnect® Access App. A green indicator next to the words “Via Mobile” will show when it is
ready to provide data to the vehicle touchscreen (a blue
indicator when data is being sent). A red indicator means
that it is not ready to provide data.
3
118 ALL ABOUT Uconnect® ACCESS
Each time you want to use a Via Mobile app in your
vehicle, the Uconnect® Access App must be running on
your smartphone and the smartphone must be paired via
Bluetooth®.
ALL ABOUT Uconnect® ACCESS 119
A message will be displayed to remind you that Via
Mobile apps utilize the data plan on your connected
smartphone to provide content. Press “OK” to continue
or the “X” to exit.
NOTE: Many smartphones have a limit to how much
data they can utilize before incurring additional charges.
The amount of data being used varies by smartphone
device, cellular service provider and specific app. Check
your smartphone service plan for more details.
3
120 ALL ABOUT Uconnect® ACCESS
Give it a try!
2. The app will launch, presenting you with a convenient
interface to use while in your vehicle. You will have
four options to select from:
• My Stations – Access stations you’ve saved and
created.
• Stations Near You – Listen to live radio stations
broadcasting from your local area.
• Live Radio – Displays live radio stations organized
by state and city (“Stations by Location”) and genres
(“Music” and “Talk Radio.”)
• Create Station – Browse featured artists to create
personalized, commercial-free custom music stations.
1. From the vehicle touchscreen select iHeartRadio from
button on the steering 3. Press “Create Station.”
the apps list, or push the
wheel and say, “launch iHeartRadio Via mobile.”
4. Press “Featured Artists by Genre.”
• Select an artist from the list.
ALL ABOUT Uconnect® ACCESS 121
5. To find a local, live radio station, return to iHeartRadio Requirements
Home and select “Stations Near You.”
• Vehicle must be properly equipped with the
• Select a station from the list
Uconnect® Access System.
• Your smartphone must be compatible with the
Uconnect® Access App and properly connected to the
vehicle.
• Your connected smartphone must be in range of a
usable cellular signal.
• Vehicle must be registered with Uconnect® Access and
have an active subscription that includes the applicable feature or App.
• Vehicle must be powered in the ON/RUN or ACC
(Accessory) position with a properly functioning electrical system.
• Vehicle must be equipped with Uconnect 6.5A/6.5AN.
Not available on Uconnect 5.0.
3
122 ALL ABOUT Uconnect® ACCESS
Tips and Shortcuts
FAQs
• Continually refine stations to your liking using the 1. Why can’t I get iHeartRadio Via Mobile to work?
Here are some things to consider:
“Thumbs Up” or “Thumbs Down” buttons.
•
Check to ensure you have linked your iHeartRadio
• Press the “HOLD to Set” button on the top of the
account credentials with Uconnect® Access. This is
screen for three seconds to add current station as a
usually done during registration and setup. Then,
preset. Set up to 10 presets.
check to ensure you have properly connected your
NOTE: Presets must be set from the music player screen.
compatible smartphone to the radio. The Uconnect®
Access App must be open and you must be logged
• Use the “Discovery Tuner” button on the touchscreen to
in. A blue light indicates that it’s providing data to
change the variety of the station you are listening to. Set
the vehicle.
the tuner to “Familiar,” “Mixed,” and “Less Familiar”
• If you recently changed your password for iHeart– Familiar — The most popular songs for this station.
Radio, it may need to be updated on Mopar Owner
– Mixed — Additional artists and songs, for increased
Connect under the “Via Mobile” section.
variety.
– Less Familiar — The widest variety of music, for the
most discovery.
ALL ABOUT Uconnect® ACCESS 123
2. How do I personalize the music played on my 5. Can I create an iHeartRadio account during
Uconnect® Access registration and set-up? There is a
custom station? Press the “thumbs up” icon when
link from the Via Mobile profile page where the
music is played that you like, and the “thumbs down”
customer can go to iHeartRadio’s website to create a
icon when music is played that you do not like. Future
new account.
music played will give you more of the music with
characteristics that meet your preferences. The more
6. How do I set up an iHeartRadio account? You can
often you use Thumb Up and Thumbs Down, the
create or make changes to an existing iHeartRadio
better your station becomes.
account by visiting their website at iHeartRadio.com.
3. How do I know when iHeartRadio is playing one of
7. Can I create custom content from within the vehicle?
the songs I indicated I “liked”? The Thumbs Up
Yes. From the iHeartRadio Home screen, press “Create
button on the radio touchscreen will appear in red
Station.”
when playing a song you previously liked.
8. Should I have the iHeartRadio app downloaded to
4. If I changed my password for iHeartRadio, do I have
my smartphone to use Uconnect® Access Via Moto update it with Uconnect® Access? Yes. Visit Mopar
bile? You do not need to have the iHeartRadio app on
Owner Connect moparownerconnect.com, log in,
your smartphone in order to use iHeartRadio Via
and click on Via Mobile.
Mobile. The Uconnect® Access App is required, however.
3
124 ALL ABOUT Uconnect® ACCESS
9. How do I know how much data is being used? • Reduce the need to use your smartphone to access
Slacker Radio so you can stay focused on driving.
Uconnect® Access Via Mobile uses your smartphone’s
existing data plan to stream content. Data usage varies
• Launch Slacker Radio using Voice Recognition (VR) or
by phone/device, content (e.g. videos), high quality
through touchscreen controls.
audio and several other factors. Please refer to your
• Leverage existing Slacker Radio account. Customer
device carrier for specific details.
can set up a free or paid account on the Slacker Radio
10. How do I block explicit content? Customers have
website at slacker.com.
the ability to block explicit content within the iHeartRadio Settings menu. Go to iHeartRadio Home and • Customers can also create a new Slacker Radio account
from the Uconnect® Access Via Mobile profile page
select the “gear” icon.
during registration and setup.
Slacker Radio — If Equipped
Enjoy millions of songs and hundreds of handcrafted • Browse and listen to stations by selecting from hundreds of expert-programmed stations or tune into
stations.
entertainment, sports and news stations. You can also
Description
access Recently Played and stations you’ve previously
created at My Station. (Browse and listen to previously
• Easily control your Slacker Radio app through an
created playlists for premium account only.)
intuitive interface via the vehicle touchscreen and
steering wheels controls.
ALL ABOUT Uconnect® ACCESS 125
• Listen to customized stations based on your favorite 1. If you have not registered with Uconnect® Access,
begin by pressing the “Apps” button on the touchartists and music.
screen inside your vehicle, and then press “Uconnect
• Continually refine stations to your liking using the
Registration.”
“Heart,” “Ban Artist” or “Ban Song” controls.
2. Once you receive an email from “Uconnect Access,”
How It Works
click on the secure link to complete your registration
on moparownerconnect.com where you’ll be guided
Via Mobile uses the Uconnect® Access smartphone app
through setup of your Via Mobile profile.
and your smartphone’s data plan to access your personal
Slacker Radio account from the vehicle and control it
3. Next, link app accounts to your Via Mobile profile by
using the vehicle touchscreen. A compatible smartphone
entering your login information for apps like Slacker
is required. The Slacker Radio mobile app on your phone
Radio.
does not need to be launched to use Slacker Radio Via
If you’ve already registered with Uconnect Access, log
Mobile.
in to moparownerconnect.com to set up your Via
If you’ve already registered with Uconnect® Access, log
Mobile profile. Click on “Via Mobile Profile”.
in to moparownerconnect.com to set up your Via Mobile profile. Click on “Via Mobile Profile.”
3
126 ALL ABOUT Uconnect® ACCESS
4. Next, connect your smartphone to the vehicle touchscreen. The Uconnect® Access app is compatible with
select iPhone® and Android smartphones. Visit
UconnectPhone.com to confirm that your smartphone is compatible with Uconnect®. Once you’ve
confirmed your smartphone is compatible, pair it to
the vehicle touchscreen via Bluetooth® to use Via
Mobile apps. If using an iPhone®, a USB cable may
also be supported for the data connection.
5. Launch the Uconnect® Access app on your connected
smartphone and log in with your Mopar Owner
Connect Username/Email and password. From the
vehicle touchscreen press the “Apps” button and
select Slacker Radio from the list. Slacker Radio is
located within the “All Apps” tab. To launch Slacker
Radio using voice recognition, push the button on the
steering wheel and say, “launch Slacker Via Mobile.”
Ensure that Via Mobile data has been turned on under
“Settings” in the Uconnect® Access App. A green indicator next to the words “Via Mobile” will show when it is
ready to provide data to the vehicle touchscreen (a blue
indicator when data is being sent). A red indicator means
that it is not ready to provide data.
ALL ABOUT Uconnect® ACCESS 127
3
Each time you want to use a Via Mobile app in your
vehicle, the Uconnect® Access App must be running on
your smartphone and the smartphone must be paired via
Bluetooth®.
128 ALL ABOUT Uconnect® ACCESS
A message will be displayed to remind you that Via
Mobile apps utilize the data plan on your connected
smartphone to provide content. Press “OK” to continue
or the “X” to exit.
NOTE: Many smartphones have a limit to how much
data they can utilize before incurring additional charges.
The amount of data being used varies by smartphone
device, cellular service provider and specific app. Check
your smartphone service plan for more details.
ALL ABOUT Uconnect® ACCESS 129
Your chosen station will play. Use the “Heart” and “Ban”
buttons on the touchscreen to quickly and easily customize your experience. Like a song? Heart it to hear it more
often. Dislike a song? Ban it and the song or artist will be
removed from your station. Slacker Radio makes it easy
and personal.
Requirements
• Vehicle must be properly equipped with the
Uconnect® Access System.
Give it a try!
• Your smartphone must be compatible with the
Uconnect® Access App and properly connected to the
vehicle.
1. From the vehicle touchscreen select Slacker Radio from
• Your connected smartphone must be in range of a
the apps list, or push the
button on the steering
usable cellular signal.
wheel and say, “launch Slacker Via Mobile.”
• Vehicle must be registered with Uconnect® Access and
2. Select Slacker Radio Stations
have an active subscription that includes the appli3. Select Top Stations > Today’s Hits
cable feature or App.
3
130 ALL ABOUT Uconnect® ACCESS
• Vehicle must be powered in the ON/RUN or ACC FAQs
(Accessory) position with a properly functioning elec1. Why can’t I get Slacker Radio Via Mobile to work?
trical system.
Here are some things to consider:
• Vehicle must be equipped with Uconnect 6.5A/6.5AN.
• Check to ensure you have linked your Slacker Radio
Not available on Uconnect 5.0.
account credentials with Uconnect® Access. This is
usually done during registration and setup. Then,
Tips and Shortcuts
check to ensure you have properly connected your
• Continue to use the “like” icon (Heart), and “dislike”
compatible smartphone to the vehicle touchscreen.
icon (circle with line through it) to confirm your music
The Uconnect® Access App must be open and you
preferences and refine the music being played on that
must be logged in. A blue light indicates that it’s
station.
providing data to the vehicle.
• If you recently changed your password for Slacker
• Steering wheel controls supported for “next track”
Radio, it may need to be updated on Mopar Owner
(until reaching maximum skips – for free account).
Connect under the “Via Mobile” section.
ALL ABOUT Uconnect® ACCESS 131
2. How do I customize the music being played on the 5. Can I create a Slacker Radio account during Uconnect®
station? As you listen to music, use the button on the
Access registration and set-up? There is a link from the
Via Mobile profile page where the customer can go to
touchscreen to confirm your preference to the music
Slacker Radio’s website to create a new account.
currently being played. Press the “like” icon to confirm what you want to hear more of, and the “dislike”
6. How do I set up a Slacker Radio account? You can
icon to eliminate what you do not want to hear.
create an account with Slacker Radio by visiting their
website at slacker.com. To make changes to an exist3. How do I know when Slacker Radio is playing one
ing Slacker Radio account, visit Slacker Radio’s webof the songs I indicated I “liked”? The heart button
site.
on the touchscreen will appear in yellow when playing a song you previously liked. When you see it
7. Can I create custom content from within the vehicle?
appear in yellow, you do not need to “like” it again,
To create a custom station, visit Slacker Radio’s weband you know that Slacker Radio is playing your
site at slacker.com or the Slacker Radio mobile app.
preferences.
Custom content cannot be created from within the
vehicle.
4. Can I ban a particular artist from playing in Slacker
Radio? Yes, Slacker Radio gives you the capability to
ban all songs from a particular artist or song by using
the “dislike” button on the touchscreen.
3
132 ALL ABOUT Uconnect® ACCESS
8. Should I have the Slacker Radio app downloaded to
my smartphone to use Uconnect® Access Via Mobile? You do not need to have the Slacker Radio app
on your smartphone to use Slacker Radio Via Mobile.
However, the Uconnect® Access App is required.
Description
Aha™ lets you easily access and organize your favorite
web content on your phone, then seamlessly integrates
the experience with your vehicle.
• Listen to audio updates from Facebook® or Twitter®
9. How do I know how much data is being used?
(Vehicle must be registered with Uconnect®Access).
Uconnect® Access Via Mobile uses your smartphone’s
existing data plan to stream content. Data usage varies • Organize your favorite content from the web into
personalized on-demand radio stations.
by phone/device, content (e.g. videos), high quality
audio and several other factors. Please refer to your
• Aha™ gives customers the flexibility to create up to 30
device carrier for specific details.
pre-set stations from within the vehicle, on the Aha™
website (aharadio.com), or through the Aha™ mobile
Aha™ by HARMAN — If Equipped
app.
Aha™ makes it easy to instantly access your favorite Web
content on the go. Choose from over 40,000+ stations • “Like” and “Dislike” buttons on the touchscreen are
spanning internet radio, personalized music, news, enavailable to refine songs being played on the station.
tertainment, hotels, weather, audiobooks, Facebook®,
Twitter®, and more.
ALL ABOUT Uconnect® ACCESS 133
• Ability to perform location-based local searches (e.g. The Aha™ mobile app on your mobile phone does not
“Hungry” and “Coffee”) and route to a point of need to be launched to use Aha™ Via Mobile.
interest by sending the address to the navigation
1. If you have not yet registered with Uconnect® Access,
system (if nav equipped).
begin by pressing the “Apps” icon on the touchscreen
inside your vehicle, then pressing “Uconnect Registra• Real-time traffic reports and audio books (read aloud).
tion.”
• Access your favorite podcasts, internet radio, on-demand
music, traffic reports and restaurant recommendations.
2. Once you receive an email from “Uconnect Access,”
click on the secure link to complete your registration
• News, sports, talk, social, comedy and special interest
on moparownerconnect.com where you will be
podcasts.
guided through the setup of your Via Mobile profile.
How It Works
3. Next, link app accounts to your Via Mobile profile by
Via Mobile uses the Uconnect® Access smartphone app
entering your login information for Aha™.
and your smartphone’s data plan to access your personal
If you have already registered with Uconnect® Access,
Aha™ account from the vehicle and control it using the
log in to moparownerconnect.com to set up your Via
vehicle touchscreen. A compatible smartphone is required.
Mobile profile. Click on “Via Mobile Profile.”
3
134 ALL ABOUT Uconnect® ACCESS
4. Next, connect your smartphone to the vehicle touchscreen. The Uconnect® Access app is compatible with
select iPhone® and Android smartphones. Visit
UconnectPhone.com to confirm that your smartphone is compatible with Uconnect. Once you have
confirmed your smartphone is compatible, pair it to
the vehicle touchscreen via Bluetooth® to use Via
Mobile apps. If using an iPhone®, a USB cable may
also be supported for the data connection.
5. Launch the Uconnect® Access app on your connected
smartphone and log in with your Mopar Owner
Connect Username/Email and password. From the
vehicle touchscreen press the #Apps# button and select
Aha™ from the list. Aha™ is located within the “All
Apps” tab. To launch Aha™ using voice recognition,
push the VR button on the steering wheel and say,
“launch Aha™ Via Mobile.”
Ensure that Via Mobile data has been turned on under
“Settings” in the Uconnect® Access App. A green indicator, next to the words “Via Mobile,” will show when it is
ready to provide data to the vehicle touchscreen (a blue
indicator when data is being sent). A red indicator means
that it is not ready to provide data.
ALL ABOUT Uconnect® ACCESS 135
3
Each time you want to use a Via Mobile app in your
vehicle, the Uconnect® Access App must be running on
your smartphone and the smartphone must be paired via
Bluetooth®.
136 ALL ABOUT Uconnect® ACCESS
A message will be displayed to remind you that Via
Mobile apps utilize the data plan on your connected
smartphone to provide content. Touch “OK” to continue
or the “X” to exit.
NOTE: Many smartphones have a limit to how much
data they can utilize before incurring additional charges.
The amount of data being used varies by smartphone
device, cellular service provider and the specific app.
Check your smartphone service plan for more details.
ALL ABOUT Uconnect® ACCESS 137
within the vehicle, from the Aha™ website, or
through the Aha™ mobile app. Some stations may
not be available on Aha™.
Give it a try!
2. Select an Aha™ station. Your chosen station will play.
Refine the content for select stations using the “Like”
and “Dislike” buttons on the touchscreens.
• Featured – Takes you back to Aha™ featured content
list
• Nearby – Search for POIs from the following categories: Hungry, Coffee, Hotels, Weather
• Settings – Designate preference to allow explicit
content
1. From the vehicle touchscreen select Aha™ from the 3. Select the “List” button on the touchscreen to see
button on the steering
apps list, or push the
additional content within the current station
wheel and say, “launch Aha™ Via Mobile.”
4. Select a program
• If you have not used Aha™ before, you will see a list
of default stations. Only after you personalize it will 5. Add station to Presets
your presets be shown. Presets can be set from
3
138 ALL ABOUT Uconnect® ACCESS
You can associate your Aha™ account with your personal • Vehicle must be powered in the ON/RUN or ACC
(Accessory) position with a properly functioning elecFacebook®, Twitter® and Slacker accounts. If you have the
trical system.
Aha™ app downloaded to your smartphone visit the Aha™
settings screen and look for “Associate Accounts.” You can
• Vehicle must be equipped with Uconnect 6.5A/6.5AN.
also associate your Aha™ account from aharadio.com.
Not available on Uconnect 5.0.
Requirements
Tips and Shortcuts
• Vehicle must be properly equipped with the
• Use the “like” and “dislike” option to continue to
Uconnect® Access System.
refine music played on stations like Slacker.
• Your smartphone must be compatible with the
• Link your Facebook® and Twitter® account on the
Uconnect® Access App and properly connected to the
Aha™ website to share with others what you are
vehicle.
listening to while you drive.
• Your connected smartphone must be in range of a
usable cellular signal.
• Vehicle must be registered with Uconnect® Access and
have an active subscription that includes the applicable feature or app.
ALL ABOUT Uconnect® ACCESS 139
FAQs
2. How does Aha™ help refine my music options? It
organizes your favorite content into personalized ondemand radio stations. You can access podcasts, internet radio, personalized traffic reports and even restaurant recommendations. It will assemble content for
you based on your use of the “like” and “dislike”
buttons on the touchscreen.
1. Why can’t I get Aha™ Via Mobile to work? Here are
some things to consider:
• Check to ensure you have linked your Aha™ account
credentials with Uconnect® Access. This is usually
done during registration and setup. Then, check to
ensure you have properly connected your compatible smartphone to the vehicle touchscreen. The 3. Where does the search function search from? The
search function will provide results based on the
Uconnect® Access App must be open and you must
location of your vehicle. As you drive, the search
be logged in. A blue light indicates that it’s providing
results will change to reflect your vehicle’s current
data to the vehicle.
location.
• If you recently changed your password for Aha™, it
may need to be updated on Mopar Owner Connect 4. How do I sync my Aha™ account with Facebook®,
under the “Via Mobile” section.
Twitter® and Slacker? Associate your Aha™ account
with Facebook®, Twitter® and Slacker services at
aharadio.com, or from the Aha™ smartphone app.
From the Aha™ smartphone app, visit the Aha™
settings screen and look for “Associate Accounts.”
3
140 ALL ABOUT Uconnect® ACCESS
5. If I enter personalized preferences on the web, will it 7. If I changed my password for Aha™, do I have to
update it with Uconnect® Access? Yes. Visit
also save my setting when I am in the vehicle? Yes,
moparownerconnect.com, log in, and click on Via
your personalized selections are saved to a common
Mobile.
area, so they will be reflected wherever you access
Aha™ in the vehicle on the vehicle touchscreen,
8. How do I set up an Aha™ account? You can create an
smartphone or the Aha™ website aharadio.com.
account with Aha™ by visiting aharadio.com. To
make changes to an existing Aha™ account, visit the
6. Why can’t I get Aha™ Via Mobile to work? Ensure
Aha™ website.
you have registered for Uconnect® Access and associated your Aha™ account credentials with
9. Can I create an Aha™ account during Uconnect®
Uconnect® Access. This is done during registration
Access registration and setup? There is a link from the
and setup process. Then, ensure you have properly
Via Mobile profile page where the customer can go to
connected your compatible smartphone to the vehicle
the Aha™ website to create a new account.
touchscreen. The Uconnect® Access App must be
open. A blue light indicates that it’s providing data to
the vehicle.
ALL ABOUT Uconnect® ACCESS 141
10. How do I block explicit content? By default Aha™
automatically filters and blocks explicit content for
you. If you would like to enable the ability to listen to
explicit podcasts, as well as comedy or usergenerated shouts, you must visit the “Settings”
screen and switch the “Allow Explicit Content” setting to ON.
11. Should I have the Aha™ app downloaded to my
smartphone to use Aha™ Via Mobile? You do not
need to have the Aha™ app on your smartphone to
use Aha™ Via Mobile. The Uconnect® Access App is
required.
12. How do I know how much data is being used?
Uconnect® Access Via Mobile uses your smartphone’s existing data plan to stream content. Data
usage varies by phone/device, content (e.g. videos),
high quality audio and several other factors. Please
refer to your device carrier for specific details.
MAINTAIN MY Uconnect® ACCESS ACCOUNT
Reinstalling An App
From the in-vehicle touchscreen do the following:
1. Press the Uconnect® “App” button and open the
Uconnect® Store. Select “My Apps.”
3
142 ALL ABOUT Uconnect® ACCESS
2. In “My Apps,” select “Settings” and then “Reinstall
App” and “Continue.”
ALL ABOUT Uconnect® ACCESS 143
3
144 ALL ABOUT Uconnect® ACCESS
3. Your Apps have been successfully re-installed.
How To Remove My Uconnect® Access Account
To remove your Uconnect® Access account or cancel
your Uconnect® Access subscription, follow the instructions below. You may also go to the Mopar Owner
Connect website (moparownerconnect.com). On Mopar
Owner Connect, go to Uconnect® Store, and click on
“Remove My Vehicle.”
For further assistance
855-792-4241.
call
Uconnect®
Care
at
ALL ABOUT Uconnect® ACCESS 145
1. Press the Uconnect® “Apps” button and open the
Uconnect® Store. Select “My Apps.”
3
146 ALL ABOUT Uconnect® ACCESS
2. In “My Apps”, select “Settings” and then “Remove
Uconnect® Account” and “Continue.”
ALL ABOUT Uconnect® ACCESS 147
3. Your Apps have been successfully removed.
3
148 ALL ABOUT Uconnect® ACCESS
Adding Vehicles To My Uconnect® Access
Account
Uconnect® Care Business Hours:
Central Time
You can easily add vehicles to your Uconnect® Access
• Monday through Friday – 7:00am to 7:00pm
account online by going to the Mopar Owner Connect
website (moparownerconnect.com) > Dashboard > Add • Saturday and Sunday – 8:00am to 4:00pm
a Vehicle. Connected vehicles must follow the secure
1. How Do I Register For My Uconnect® Access Acregistration process to be added to an account.
count? Press the “Apps” button on the in-vehicle
touchscreen, then select Uconnect® Registration.
Uconnect® CARE & FAQs
For additional information about Uconnect® Access, 2. Why Do I Need An Email Address? Without an email
address, customers cannot register for Uconnect® Acpush the ASSIST button on the rear view mirror and then
cess. Customers need to register so they can subscribe to
select Uconnect® Care on your in-vehicle touchscreen to
receive additional services and create a Uconnect®
contact Uconnect® Care. Your call will be directed to a
Security PIN for remote command requests.
Uconnect® Care agent or held in a queue until an agent
is available. You can also phone Uconnect® Care directly
at 855-792-4241, or go to the Mopar Owner Connect
website (moparownerconnect.com).
ALL ABOUT Uconnect® ACCESS 149
3. How Do I Create A Uconnect® Security PIN? Set up 5. How Do I Create A Uconnect® Payment PIN? Log
into the Mopar Owner Connect website
your Uconnect® Security PIN during the registration
(moparownerconnect.com) with your username and
process. The Uconnect® Security PIN will be required
password. Select Edit Profile > Uconnect® Payment
to authenticate you when accessing your account via
Account to create an account (and PIN) (if you have a
Uconnect® Care or performing any remote services
Uconnect® Access equipped vehicle).
such as Remote Door Lock/Unlock, Remote Horn &
Lights, or Remote Vehicle Start.
6. What Is A Uconnect® Payment PIN? A Uconnect®
Payment PIN is a unique 4-digit code that you create
4. What If I Forgot My Uconnect® Security PIN? If
you’ve already registered and forgot your Uconnect®
to gain access to your payment information – your
Security PIN, you can reset the pin by selecting
credit cards, billing address, payment history and
Edit Profile on the Mopar Owner Connect website
more. It is required in order to purchase Uconnect®
(moparownerconnect.com), or you can call
Access packages and Apps.
Uconnect® Care at 855-792-4241.
7. What If I Forgot My Uconnect® Payment PIN? The
next time you are asked for your Uconnect® Payment
PIN, select “Forgot PIN?” and follow the steps to reset it.
3
150 ALL ABOUT Uconnect® ACCESS
8. How Do I Update My Uconnect® Payment Account 10. Can I Try Apps, Features Or Packages Before I Buy
Them? Your new vehicle purchase may have come
Address? Your Uconnect® Payment Account address
with an included trial period for certain Apps and
must be updated online only: Login to the Mopar
services. For more information please contact
Owner Connect website (moparownerconnect.com),
Uconnect® Care at 855-792-4241.
and select Edit Profile > Uconnect® Payment Account.
9. How Do I Update My Uconnect® Profile? Your 11. Can I Access Every App And Service While Driving? No, some applications and services are not
name, home address, phone number, email address
available while driving. For your own safety, it is not
and Uconnect® Security PIN can be updated
possible to use some of the touchscreen features
online on the Mopar Owner Connect website
while the vehicle is in motion (e.g. key pad).
(moparownerconnect.com).
a. Log in to the Mopar Owner Connect website 12. Can I Access The Uconnect® Store While I Am
Driving? No, some applications and services are not
(moparownerconnect.com) then select Edit Profile
to edit your personal information.
available while driving. Only use Uconnect® when it
is safe to do so.
b. Make your edits and click “Save.”
13. How Do I Know When A New App, Feature Or
Package Is Offered? Go to Uconnect® Store to check
for updated features, packages and Apps.
ALL ABOUT Uconnect® ACCESS 151
14. Will I Be Notified When My Subscription Is Expired Or Will It Automatically Renew? There is no
auto-renewal feature currently offered. You can find
the expiration dates for all of your App and package
subscriptions from your in-vehicle touchscreen, select Apps > All Apps > Uconnect® Store > My Apps.
c. Follow the steps to enter your Uconnect® Payment
PIN and complete the process.
You can also go to the Uconnect® Store online at
Mopar Owner Connect (moparownerconnect.com),
select the Shop tab, then Uconnect® Store. For
additional support please contact Uconnect® Care
at 855-792-4241.
15. How Do I Manage My Notification Preferences? Go
to Edit Profile > Uconnect® Notifications on the Mopar 18. How Do I Update My Credit Card Information?
Owner Connect website (moparownerconnect.com).
Login to the Mopar Owner Connect website
(moparownerconnect.com), and select Edit Profile,
16. Do I Receive A Purchase Confirmation? Yes. You
then select Uconnect® Payment Account.
will receive a purchase confirmation email any time
you renew your Uconnect® Access subscription or 19. How Do I Find Out How Much Longer I Have On
purchase WiFi Hotspot service.
My Subscription? From your in-vehicle touchscreen
17. How Do I Purchase A Subscription Or WiFi
Hotspot? From your in-vehicle touchscreen:
a. Select Apps > All Apps > Uconnect® Store.
b. Choose a package or service.
> select Apps > All Apps >Uconnect® Store > My
Apps and choose a subscription to view its expiration
date. When your subscription is about to expire you
will receive an email notification.
3
152 ALL ABOUT Uconnect® ACCESS
20. Which Apps Are Included With My Vehicle? Go to 25. Do I Have To Keep My Vehicle On During The App
Uconnect® Store > My Apps to see Apps currently
Download Process? Yes.
available on your vehicle.
26. How Do I Re-Initiate A Download App If There
21. If I Delete/Remove A Package From My Screen,
Was An Error? If you’re having issues with an App
Does It Cancel My Subscription? Yes, this removes
you can reinstall it. This returns the App to its
the subscription of the selected package.
original state which usually fixes the problem. This
does not affect your Uconnect® subscriptions or
22. Can I Get A Refund If I Have Not Used The Entire
account information. To reinstall an App from the
Subscription? No.
in-vehicle touchscreen, press Apps > All Apps >
23. How Do I Cancel My Subscription? From your
Uconnect® Store > My Apps > Settings > Reinstall
in-vehicle touchscreen, select Apps > All Apps >
Apps > Continue.
Uconnect® Store > My Apps > Settings > Remove
27. What Should I Do If I Want To Sell My Vehicle?
Uconnect® Account.
Before your vehicle is sold to a new owner, you’ll
24. Can I Cancel A Subscription Before It Expires? Yes,
want to remove your account information. This probut your subscription will still be active until the
cess removes all personal information and returns the
expiration date. If you subscribe to another package,
Uconnect® system to its original factory settings.
the new subscription will start immediately.
ALL ABOUT Uconnect® ACCESS 153
To remove your account information from the Privacy Practices
Uconnect® system:
For more information on how Chrysler and Sprint may use
a. On the touchscreen, press Apps > All Apps > your information, please see the Uconnect® privacy policy at
driveuconnect.com/privacy/ and the Chrysler privacy
Uconnect® Store > My Apps > Settings.
statement at chrysler.com/universal/privacy.html.
b. Choose Remove Uconnect® Account and follow
Safety Guidelines
the instructions.
28. What If I Forgot To Remove My Account Information Before I Returned My Lease Vehicle Or Sold It?
Don’t worry – your information is secure. Contact
Uconnect® Care at 855-792-4241.
29. I Am Trading My Vehicle In. Can I Transfer Apps
To My New Vehicle If I Have An Active Subscription? No.
WARNING!
ALWAYS drive safely with your hands on the
steering wheel. You have full responsibility and
assume all risks related to the use of the
Uconnect® features and applications in this vehicle. Only use Uconnect® when it is safe to do so.
Failure to do so may result in an accident involving serious injury or death.
3
154 ALL ABOUT Uconnect® ACCESS
Ensure that all persons read this manual carefully before Safe Usage Of The Uconnect® Access System
using the radio system. It contains instructions on how to
• Read all instructions in this manual carefully before
use the system in a safe and effective manner.
using your system to ensure proper usage!
• Glance at the screen only when safe to do so. If
• Your system is a sophisticated electronic device. Do
prolonged viewing of the screen is required, park in a
not let young children use your system.
safe location and set the parking brake.
• Permanent hearing loss or damage may occur if you
• Stop use of the system immediately if a problem
play your music or otherwise operate the system at
occurs. Failure to do so may cause injury or damage to
loud volumes. Exercise caution when setting the volthe product. Return it to your authorized dealer to
ume on your system.
repair.
NOTE: Many features of this system are speed depen• Ensure the volume level of the system is set to a level
dent. For your own safety, it is not possible to use some
that still allows you to hear outside traffic and emerof the touchscreen features while the vehicle is in motion.
gency vehicles.
• Keep drinks, rain, and other sources of moisture away
from your system. Besides damage to your system,
moisture can cause electric shocks as with any electronic device.
ALL ABOUT Uconnect® ACCESS 155
Touchscreen
Disc Drive
• Do not touch the screen with any hard or sharp objects • Do not insert any damaged, warped, scratched or dirty
(pen, USB stick, jewelry, etc.) which could scratch the
discs into the disc player.
touchscreen surface!
• Discs that have been modified with an adhesive label
• Do not spray any liquid or caustic chemicals directly
should not be used in the CD/DVD player.
on the screen! Use a clean and dry micro fiber lens
• Do not insert more than one disc at a time into the
cleaning cloth in order to clean the touchscreen.
drive slot.
• If necessary, use a lint-free cloth dampened with a FCC Declaration
cleaning solution, such as isopropyl alcohol, or an
isopropyl alcohol and water solution ratio of 50:50. Be This device complies with Part 15 of the FCC Rules.
sure to follow the solvent manufacturer’s precautions Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2)
and directions.
this device must accept any interference received, including interference that may cause undesired operation.
Modifications not expressly approved by the radio
manufacturer could void the user’s authority to operate
the equipment.
3
156 ALL ABOUT Uconnect® ACCESS
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in an installation. This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
Increase the separation between the equipment and
receiver.
Consult the dealer or an experienced radio technician
for help.
Safety Information
Exposure to Radio Frequency Radiation
The radiated output power of the internal wireless radio
is far below the FCC radio frequency exposure limits.
Nevertheless, the wireless radio shall be used in such a
manner that the radio is 20 cm or further from the human
body.
The internal wireless radio operates within guidelines
found in radio frequency safety standards and recommendations, which reflect the consensus of the scientific
community. The radio manufacturer believes the internal
wireless radio is safe for use by consumers. The level of
energy emitted is far less than the electromagnetic energy
emitted by wireless devices such as mobile phones.
ALL ABOUT Uconnect® ACCESS 157
DEVICE CONNECTION AND AUDIO TIPS WITH
Uconnect®
• After all devices are connected/paired, when switching to a different audio source, audio will auto-play
from the new source.
• More than one phone or device can be paired to your
vehicle. The connected device with the highest priority • Current audio (AM/FM/SXM/AUX) will continue to
will be used. To transition between devices, Select
play when switching to a non-media type App.
Phone > Settings, then press the desired device.
• Current audio (AM/FM/SXM/AUX) is muted during
• Multiple devices may be connected at one time. For
Assist and 9-1-1 Call.
example, a phone can be paired and connected for
• Phone calls will mute all audio except for NAV
hands-free calling and texting, while a USB media
prompts if guidance is currently active (audio will
source is connected for audio. However, only one
resume after phone call is ended).
Bluetooth® connection can be used at a time.
• All secondary incoming phone calls will be treated
• Phone calls will always have the highest priority
similar to “call waiting” (except 9-1-1 Call).
regardless of which connection is active (only the 9-1-1
Call and Assist will have a higher priority than the
phone). For example, if an App is launched and the
user receives a call, the user will be exited out of the
App and returned to the App when the call ends.
3
158 ALL ABOUT Uconnect® ACCESS
• When connecting a second device via USB, that device
will have priority and auto play accordingly. A phone
that is already paired/connected will still be available
for hands-free calling and texting.
• Incoming calls received while entering a nav destination (before pressing “Go”) will cancel the nav entry.
The user is required to start over when the phone call
has ended.
RADIO MODE
CONTENTS
! RADIO MODE . . . . . . . . . . . . . . . . . . . . . . . . .160
▫ Volume/Mute Control . . . . . . . . . . . . . . . . . .160
▫ Tune/Scroll Control . . . . . . . . . . . . . . . . . . . .160
▫ Screen Close . . . . . . . . . . . . . . . . . . . . . . . . .161
▫ Seek And Direct Tune Functions . . . . . . . . . . .161
▫ Direct Tune . . . . . . . . . . . . . . . . . . . . . . . . . .162
▫ Setting Presets . . . . . . . . . . . . . . . . . . . . . . . .163
▫ SiriusXM Satellite Radio Mode —
If Equipped. . . . . . . . . . . . . . . . . . . . . . . . . .164
▫ Replay . . . . . . . . . . . . . . . . . . . . . . . . . . . . .166
▫ Favorites. . . . . . . . . . . . . . . . . . . . . . . . . . . .167
▫ Browse In SXM . . . . . . . . . . . . . . . . . . . . . . .168
▫ Audio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .171
4
160 RADIO MODE
RADIO MODE
Push the RADIO button to enter Radio Mode. The
different tuner modes; AM, FM, and SXM, can then be
selected by pressing the corresponding buttons in the
Radio mode.
Volume/Mute Control
Push the VOLUME/MUTE control knob to mute the
radio. Push the VOLUME/MUTE control knob a second
time to unmute the radio.
The electronic volume control turns continuously
(360 degrees) in either direction, without stopping. Turning the VOLUME/MUTE control knob clockwise increases the volume and counterclockwise decreases it.
The radio is equipped with the following modes:
Tune/Scroll Control
• AM
Turn the rotary TUNE/SCROLL control knob clockwise
to increase or counterclockwise to decrease the radio
station frequency. Push the ENTER/BROWSE button to
choose a selection.
• FM
• SiriusXM Satellite Radio (If Equipped)
RADIO MODE 161
Screen Close
Fast Seek Up
The “X” button at the top right, provides a means to close Press and hold the “Seek Up”
button to advance the
the Direct Tune Screen. The Direct Tune Screen also auto radio through the available stations or channels at a
closes if no activity occurs within 10 seconds.
faster rate, the radio stops at the next available station
or channel when the button is released.
Seek And Direct Tune Functions
Seek Down
The Seek Up
and Seek Down
functions are
button to tune the
activated by pressing the “Double Arrow” buttons to Press and release the “Seek Down”
the right and left of the radio station display, or by radio to the next listenable station or channel. During
pushing the left “Steering Wheel Audio Control” (if a Seek Down function, if the radio reaches the starting
station after passing through the entire band two
equipped) up or down.
times, the radio will stop at the station where it began.
Seek Up
Fast Seek Down
button to tune the
Press and release the “Seek Up”
button to advance
radio to the next listenable station or channel. During Press and hold the “Seek Down”
a Seek Up function, if the radio reaches the starting the radio through the available stations or channel at a
station after passing through the entire band two faster rate, the radio stops at the next available station
times, the radio will stop at the station where it began. or channel when the button is released.
4
162 RADIO MODE
Direct Tune
Press the available number button to begin selecting a
desired station. Once a number has been entered, any
numbers that are no longer possible (stations that cannot
be reached) will become deactivated/grayed out.
Undo
You can backspace an entry by pressing the bottom left
“Undo” button.
GO
When pressed, the green “GO” button allows you to
commit an entry, at which time the radio will tune to the
entered station or channel and close the Direct Tune
Press the “Tune” button located at the bottom of the radio Screen.
screen. The Direct Tune button screen is available in AM,
The selected Station or Channel number is displayed in
FM, and SXM radio modes and can be used to direct tune
the Direct Tune text box.
the radio to a desired station or channel.
RADIO MODE 163
Setting Presets
Browse In AM/FM
The Presets are available for all Radio Modes, and are When in either AM or FM, the Browse Screen provides a
activated by pressing any of the six “Preset” buttons on means to edit the Presets List and is entered by pushing
the touchscreen, located at the top of the screen.
the ENTER/BROWSE button.
When you are receiving a station that you wish to Scrolling Preset List
commit into memory, press and hold the desired numOnce in the Browse Presets screen, you can scroll the
bered button on the touchscreen for more that two preset list by rotation of the TUNE/SCROLL knob, or by
seconds or until you hear a confirmation beep.
pressing the “Up and Down” arrow keys, located on the
The Radio stores up to 12 presets in each of the Radio right of the screen.
modes. A set of 6 presets are visible at the top of the radio Preset Selection From List
screen.
A Preset can be selected by pressing any of the listed
You can switch between the two radio presets by pressing
Presets, or by pushing the ENTER/BROWSE button on
the “arrow button” located in the upper right of the radio the TUNE/SCROLL knob to select the currently hightouchscreen.
lighted Preset.
When selected, the radio tunes to the station stored in the
Preset and returns to the main radio screen.
4
164 RADIO MODE
every NFL game, Oprah Radio®, every MLB® and
NHL® game, every NASCAR® race, Martha Stewart and
A Preset can be deleted in the Presets Browse screen by
more. And get 20+ extra channels, including SiriusXM
pressing the “Trash Can” icon for the corresponding Preset.
Latino, offering 20 channels of commercial free music,
Return To Main Radio Screen
news, talk, comedy, sports and more dedicated to SpanYou can return to the Main Radio Screen, by pressing the ish language programming.
“X” button on the touchscreen when in the Browse Go to siriusxm.com/getallaccess for more information.
Presets screen.
SiriusXM services require subscriptions, sold separately
after the 12-month trial included with your new vehicle
SiriusXM Satellite Radio Mode — If Equipped
purchase. If you decide to continue your service at the
SiriusXM Satellite Radio uses direct satellite-to-receiver end of your trial subscription, the plan you choose will
broadcasting technology to provide clear, coast to coast automatically renew and bill at then-current rates until
radio content. SiriusXM is a subscription based service. you call SiriusXM at 1-866-635-2349 to cancel. See SiriusXM Customer Agreement for complete terms at
SiriusXM Premier
www.siriusxm.com. All fees and programming subject
Get over 160 channels on your satellite radio, and enjoy to change. Our satellite service is available only to those
all you want, all in one place. Hear commercial-free at least 18 and older in the 48 contiguous USA and D.C.
music plus sports, news, talk and entertainment. Get all Our SiriusXM satellite service is also available in PR
the premium programming, including Howard Stern, (with coverage limitations). Our Internet radio service is
Deleting Presets
RADIO MODE 165
available throughout our satellite service area and in AK
and HI. © 2014 SiriusXM Radio Inc. Sirius, XM and
all related marks and logos are trademarks of Sirius
XM Radio Inc. Service available in Canada; see
www.siriusxm.ca.
Acquiring SiriusXM Subscription
To activate the SiriusXM Satellite Radio subscription, call
1-800-643-2112 for U.S. residents and 1-877-438-9677 for
Canadian residents. You will need to provide the Sirius
ID (RID) located at the bottom of the Channel 0 screen.
This functionality is only available for radios equipped
The Satellite Mode is activated by a press of the “SXM”
with a Satellite receiver. In order to receive satellite radio,
button on the touchscreen.
the vehicle needs to be outside with a clear view to the
When in Satellite mode:
sky.
If the screen shows Acquiring Signal, you might have to • The SXM button on the touchscreen is highlighted.
change the vehicle’s position in order to receive a signal. • The SiriusXM Presets are displayed at the top of the
In most cases, the satellite radio does not receive a signal
screen.
in underground parking garages or tunnels.
• The Genre is displayed below the Presets Bar.
No Subscription
Radios equipped with a Satellite receiver, require a • The SiriusXM Channel Number is displayed in the
center.
subscription to the SiriusXM Service. When the Radio
does not have the necessary subscription, the Radio is
able to receive the Traffic/Weather channel only.
4
166 RADIO MODE
• The Program Information is displayed at the bottom of Press the “Replay” button on the touchscreen. The play/
pause, rewind/forward and live buttons will display at
the Channel Number.
the top of the screen, along with the replay time.
• The SiriusXM function buttons on the touchscreens are
You can exit by pressing the “Replay” button on the
displayed below the Program Information.
touchscreen, any time during the Replay mode.
Tuning is done by operating the TUNE/SCROLL knob or
by Direct Tune, similar to other Radio Bands, see Presets, Play/Pause
Browse, TUNE/SCROLL knob and Direct Tune.
Press the “Pause/Play” button on the touchscreen to
In addition to the tuning Operation functions common to pause the playing of live or rewound content at any time.
all Radio modes, the replay, Traffic/Weather Jump, and Play can be resumed again by pressing of the “Pause/
Play” button on the touchscreen.
fav button functions are available in SiriusXM Mode.
Replay
Rewind
The replay function provides a means to store and replay
up to 22 minutes of music audio and 48 minutes of talk
radio. Once the channel is switched, content in replay
memory is lost.
Press the “RW” button on the touchscreen to rewind the
content in steps of five seconds. Pressing the “RW”
button on the touchscreen for more than two seconds
rewinds the content. The Radio begins playing the content at the point at which the press is released.
RADIO MODE 167
Forward
Each press of the “FW” button on the touchscreen
forwards the content in steps of five seconds. Forwarding
of the content can only be done when the content is
previously rewound, and therefore, can not be done for
live content. A continuous press of the “FW” button on
the touchscreen also forwards the content. The Radio
begins playing the content at the point at which the press
is release.
Live
You can exit the Favorites Menu by a press of the “X” in
the top right corner.
The favorites feature enables you to set a favorite artist,
or song that is currently playing. The Radio then uses this
information to alert you when either the favorite song, or
favorite artist are being played at any time by any of the
SiriusXM Channels.
The maximum number of favorites that can be stored in
the Radio is 50.
Fav. Artist: While the song is playing to set a Favorite
Press the “Live” button on the touchscreen to resume Artist, press the “fav.” button on the touchscreen and
then the Fav. Artist button on the touchscreen.
playing of Live content.
Fav. Song: While the song is playing to set a Favorite
Song, press the “fav.” button on the touchscreen and then
Press the “fav.” button on the touchscreen to activate the
the Fav Song button on the touchscreen.
favorites menu, which will time out in five seconds in
absence of user interaction.
Favorites
4
168 RADIO MODE
Browse In SXM
Genre
Press the “Browse” button on the touchscreen to edit Press the “Genre” button on the touchscreen to display a
Presets, Favorites, Game Zone, and Jump settings, along list of Genres. You can select any desired Genre by
with providing the SiriusXM Channel List.
pressing the “Genre” list, the Radio tunes to a channel
This Screen contains many sub menus. You can exit a sub with the content in the selected Genre.
menu to return to a parent menu by pressing the “Back Presets
Arrow.”
Press the “Presets” button located at the left of the
All
Browse screen.
Press the “All” button at the left of the Browse Screen.
You can scroll the Presets list pressing the up and down
arrows located at the right side of the screen. Scrolling
Channel List
can also be done by operating the TUNE/SCROLL Knob
Press the Channel List, or Genre, to display all the as well.
SiriusXM Channel Numbers. You can scroll the Channel
list by pressing the “Up and Down arrows”, located on
the right side of the screen. Scrolling can also be done by
operating the TUNE/SCROLL knob.
RADIO MODE 169
The Favorites menu provides a means to Edit the Favorites list and to configure the Alert Settings, along with
A Preset can be selected by pressing any of the listed
providing a list of Channels currently airing any of the
“Presets”, or by pushing the ENTER/BROWSE button on
items in the Favorites list.
the TUNE/SCROLL knob to select the currently highlighted Preset. When selected, the Radio tunes to the You can scroll the Favorites list by pressing the “Up and
station stored in the Preset, and returns to the main Radio Down” arrows located at the right side of the screen.
Scrolling can also be done by operating the TUNE/
screen.
SCROLL knob as well.
Deleting A Preset
Remove Favorites
A Preset can be deleted in the Presets Browse screen by
pressing the “Trash Can” Icon for the corresponding Press the “Remove Favorites” tab at the top of the screen.
Press the “Delete All” button on the touchscreen to delete
Preset.
all of the Favorites or press the “Trash Can” icon next to
Favorites
the Favorite to be deleted.
Press the “Favorites” button located at the left of the
Browse screen.
Preset Selection
4
170 RADIO MODE
Alert Settings
Select Teams
Press the “Alert Setting” tab at the top of the screen. The
Alert Settings menu allows you to choose from a Visual
alert or Audible and Visual alert when one of your
favorites is airing on any of the SiriusXM channels.
Press the “Select Teams” button on the touchscreen to
activate the League Scroll list. Press the chosen league
and a scroll list of all teams within the league will appear,
then you can select a team by pressing the corresponding
box. A check mark appears for all teams that are chosen.
Game Zone
Remove Selection
Press the “Game Zone” button, located at the left of the
Browse screen. This feature provides you with the ability Press the “Remove Selection” tab at the top of the screen.
to select teams, edit the selection, and set alerts.
Press the “Delete All” button on the touchscreen to delete
all of the Selections or press the “Trash Can Icon” next to
On Air
the Selection to be deleted.
Press the “On-Air” tab at the top of the screen. The
On-Air list provides a list of Channels currently airing
any of the items in the Selections list, and pressing any of
the items in the list tunes the radio to that channel.
RADIO MODE 171
Alert Settings
Balance/Fade
Press the “Alert Setting” tab at the top of the screen. The
Alert Settings menu allows you to choose from “Alert me
to on-air games upon start” or “Alert upon score update”
or both when one or more of your selections is airing on
any of the SiriusXM channels.
4
Audio
Press the “Audio” button to activate the Audio settings
screen to adjust Balance\Fade, Equalizer and Speed
Adjusted Volume.
You can return to the Radio screen by pressing the “X”
located at the top right.
Press the “Balance/Fade” button to Balance audio between the front speakers or fade the audio between the
rear and front speakers.
Pressing the “Front, Rear, Left or Right” buttons or press
and drag the blue “Speaker” icon to adjust the Balance/
Fade.
172 RADIO MODE
Equalizer
Speed Adjusted Volume — If Equipped
Press the “Equalizer” button to activate the Equalizer Press the “Speed Adjusted Volume” button to activate the
Speed Adjusted Volume screen.
screen.
The Speed Adjusted Volume is adjusted by pressing the
Press the “+ or –” buttons, or by pressing and dragging “Off, 1, 2 or 3.” This alters the automatic adjustment of the
over the “level bar” for each of the equalizer bands. The audio volume with variation to vehicle speed. Volume
level value, which spans between ±9, is displayed at the increases automatically as speed increase to compensate for
bottom of each of the Bands.
normal road noise.
RADIO MODE 173
Surround Sound — If Equipped
Loudness
4
Press the “On” button to activate Surround Sound. Press Press the “On” button to activate Loudness. Press “Off”
“Off” to deactivate this feature.
to deactivate this feature.
When Surround Sound is On, you can hear audio coming When Loudness is On, the loudness setting increases
from every direction as in a movie theatre or home dynamic range of audio at higher volumes.
theatre system.
174 RADIO MODE
AUX Volume Offset
Auto-On Radio
Press the “Aux Volume Offset” button to access the offset Press the “On” button to activate the Auto-On Radio
screen.
feature. Press “Off” button to deactivate this feature.
To adjust the amount of radio volume compensation. Press the “Recall Last” button to recall the last radio
Press the “+ or –” buttons, or press and drag over the setting, whether the radio was on or off at the last
ignition OFF.
“level bar”.
MEDIA MODE
CONTENTS
! MEDIA MODE . . . . . . . . . . . . . . . . . . . . . . . . .176
▫ AUX Mode . . . . . . . . . . . . . . . . . . . . . . . . . .178
▫ USB/iPod® Mode . . . . . . . . . . . . . . . . . . . . .176
▫ Bluetooth® Mode . . . . . . . . . . . . . . . . . . . . .179
5
176 MEDIA MODE
MEDIA MODE
Seek Up/Down
USB/iPod® Mode
Overview
USB/iPod® Mode is entered by either inserting a USB
device or iPod® and cable into the USB Port or push the
MEDIA button and then press the “iPod®” button on the
display.
button for the next
Press and release the “Seek Up”
selection on the USB device/iPod®. Press and release
button to return to the beginning
the “Seek Down”
of the current selection, or return to the beginning of
the previous selection if the USB device/iPod® is
within the first second of the current selection.
Browse
Press the “Browse” button to display the browse window.
The left side of the browse window displays a list of ways
you can browse through the contents of the USB
device/iPod®. If supported by the device, you can
browse by Folders, Artists, Playlists, Albums, Songs, etc.
Press the desired button on the left side of the screen. The
center of the browse window shows items and it’s
sub-functions, which can be scrolled by pressing the “Up
and Down” buttons to the right. The TUNE/SCROLL
knob can also be used to scroll.
MEDIA MODE 177
Source
Info
Press the “Select Source” button to select the desired Press the “Info” button to display the current track
audio source, USB/iPod®, SD Card, AUX or Bluetooth®. information. Press the “Info” button a second time to
This screen will time out after a few seconds and return cancel this feature.
to the main radio screen if no selection is made.
Tracks
Repeat
Press the “trks” button to display a pop up with the Song
Press the “Repeat” button to toggle the repeat function- List. The currently playing song is indicated by an arrow
ality. The Repeat button is highlighted when active. The and lines above and below the song title. When in the
Radio will continue to play the current track, repeatedly, Tracks List screen you can rotate the TUNE/SCROLL
as long as the repeat is active.
knob to highlight a track (indicated by the line above and
below the track name) and then press the ENTER/
Shuffle
BROWSE knob to start playing that track.
Press the “Shuffle” button to play the selections on the
USB/iPod® device in random order to provide an inter- Pressing the “trks” button while the pop up is displayed
esting change of pace. Press the button a second time to will close the pop up.
turn this feature off.
Audio
Refer to Radio Mode for adjusting the audio settings.
5
178 MEDIA MODE
AUX Mode
Inserting Auxiliary Device
Gently insert the Auxiliary device cable into the AUX
Port. If you insert an Auxiliary device with the ignition
AUX Mode is entered by inserting an AUX device using
a cable with a 3.5 mm audio jack into the AUX port or ON and the radio ON, the unit will switch to AUX mode
and begin to play when you insert the device cable.
push the MEDIA button and then press the AUX button
on the display.
Controlling The Auxiliary Device
Overview
The control of the auxiliary device (e.g., selecting playlists, play, fast forward, etc.) cannot be provided by the
radio; use the device controls instead. Adjust the volume
with the VOLUME/MUTE rotary knob, or with the
volume of the attached device.
NOTE: The vehicle radio unit is acting as the amplifier
for audio output from the Auxiliary device. Therefore if
the volume control on the Auxiliary device is set too low,
there will be insufficient audio signal for the radio unit to
play the music on the device.
MEDIA MODE 179
Source
NOTE: See the pairing procedure in the Uconnect®
Phone section for more details.
Press the “Select Source” button to select the desired
audio source, USB/iPod®, SD Card, AUX or Bluetooth®. To access Bluetooth® mode, press the Bluetooth® button
This screen will time out after a few seconds and return on the left side of the display.
to the main radio screen if no selection is made.
Audio
Refer to Radio Mode for adjusting the audio settings.
Bluetooth® Mode
Overview
Bluetooth® Streaming Audio (BTSA) or Bluetooth®
Mode is entered by pairing a Bluetooth® device, containing music, to the Uconnect® System.
Before proceeding, the Bluetooth® device must be paired
to the Uconnect® Phone to communicate with the
Uconnect® System.
5
180 MEDIA MODE
Seek Up/Down
Tracks
button on the
Press and release the “Seek Up”
touchscreen for the next selection on the Bluetooth®
button
device. Press and release the “Seek Down”
on the touchscreen to return to the beginning of the
current selection, or return to the beginning of the
previous selection if the Bluetooth® device is within
the first second of the current selection.
If the Bluetooth® device supports this feature, press the
trks button on the touchscreen to display a pop up with
the Song List. The currently playing song is indicated by
a blue arrow and lines above and below the song title.
Source
Press the Select Source button on the touchscreen to select
the desired audio source, USB/iPod®, SD Card, AUX or
Bluetooth®. This screen will time out after a few seconds
and return to the main radio screen if no selection is
made.
Pressing the trks button on the touchscreen while the pop
up is displayed will close the pop up.
Audio
Refer to Radio Mode for adjusting the audio settings.
Uconnect® PHONE
CONTENTS
! Uconnect® PHONE . . . . . . . . . . . . . . . . . . . . .182
▫ Advanced Phone Connectivity . . . . . . . . . . . .203
▫ Overview . . . . . . . . . . . . . . . . . . . . . . . . . . .182
▫ Things You Should Know About Your
Uconnect® Phone . . . . . . . . . . . . . . . . . . . . .203
▫ Operation . . . . . . . . . . . . . . . . . . . . . . . . . . .185
▫ Phone Call Features . . . . . . . . . . . . . . . . . . .194
▫ Uconnect® Phone Features . . . . . . . . . . . . . .199
▫ General Information . . . . . . . . . . . . . . . . . . .208
6
182 Uconnect® PHONE
Uconnect® PHONE
Overview
• Calling Back the last incoming call number (“Call
Back”).
•
Uconnect® Phone is a voice-activated, hands-free, invehicle communications system. Uconnect® Phone allows you to dial a phone number with your mobile
phone.
•
Uconnect® Phone supports the following features:
View Call logs on screen (“Show incoming calls,”
“Show Outgoing calls,” “Show missed Calls,” “Show
Recent Calls”).
Searching Contacts phone number (“Search for John
Smith Mobile”).
NOTE: Examples of Voice Commands and Voice Text
Reply are provided throughout this manual. For quick
• Hands-Free dialing via Voice (“Call John Smith Mo- use, go to the Voice Command Quick Tips Section.
bile” or, “Dial 248–555–1212”).
Screen Activated Features
• Hands-Free text to speech listening of your incoming
• Dialing via Keypad using touchscreen.
SMS messages.
• Hands-Free Text Message Reply. (Forward one of 18 • Viewing and Calling contacts from Phonebooks displayed on the touchscreen.
pre-defined SMS messages to incoming calls/text
Voice Activated Features:
messages).
• Redialing last dialed numbers (“Redial”).
• Setting Favorite Contact Phone numbers so the are
easily accessible on the Main Phone screen.
Uconnect® PHONE 183
Uconnect® Phone allows you to transfer calls between
the system and your mobile phone as you enter or exit
• Reviewing your recent Incoming SMS.
your vehicle and enables you to mute the system’s
• Listen to Music on your Bluetooth® Device via the microphone for private conversation.
touchscreen.
• Viewing and Calling contacts from Recent Call logs.
• Pairing up to 10 phones/audio devices for easy access
to connect to them quickly.
NOTE: Your phone must be capable of SMS messaging
via Bluetooth® for messaging features to work properly.
WARNING!
ALWAYS drive safely and obey all applicable
laws. You should only use Uconnect® features
when it is safe to do so. Failure to do so may result
in an accident involving serious injury or death.
Your mobile phone’s audio is transmitted through your
vehicle’s audio system; the system will automatically The Uconnect® Phone is driven through your Bluetooth®
mute your radio when using the Uconnect® Phone.
“Hands-Free Profile” mobile phone. Uconnect® features
Bluetooth® technology - the global standard that enables
For Uconnect® customer support:
different electronic devices to connect to each other without
• U.S. residents - visit UconnectPhone.com or call
wires or a docking station, so Uconnect® Phone works no
1–877–855–8400
matter where you stow your mobile phone (be it your purse,
• Canadian residents - UconnectPhone.com or call pocket, or briefcase), as long as your phone is turned on
1–800–465–2001 (English) or 1–800–387–9983 (French) and has been paired to the vehicle’s Uconnect® Phone.
6
184 Uconnect® PHONE
The Uconnect® Phone allows up to ten mobile phones or Uconnect® Voice Command Button
audio devices to be linked to the system. Only one linked (or
The Uconnect® Voice Command
button on
paired) mobile phone and one audio device can be used with
your steering wheel is only used for “barge
the system at a time.
in” and when you are already in a call and
you want to send Tones or make another call.
Uconnect® Phone Button
button on your
The Uconnect® Phone
steering wheel is used to get into the phone
mode and make calls, show recent, incoming, outgoing calls, view phonebook etc.,
When you press the button you will hear a BEEP. The
beep is your signal to give a command.
The
button on your steering wheel is also used to
access the Voice Commands for the Uconnect® Voice
Command features if your vehicle is equipped. Please
see the Uconnect® Voice Command section for direcbutton.
tion on how to use the
The Uconnect® Phone is fully integrated with the vehicle’s audio system. The volume of the Uconnect® Phone
can be adjusted either from the radio volume control
knob or from the steering wheel radio control (right
switch), if so equipped.
Uconnect® PHONE 185
Operation
• For certain operations, compound commands can be
used. For example, instead of saying “Call” and then
“John Smith” and then “mobile,” the following compound command can be said: “Call John Smith
mobile.”
Voice commands can be used to operate the Uconnect®
Phone and to navigate through the Uconnect® Phone
menu structure. Voice commands are required after most
Uconnect® Phone prompts. There are two general methods for how Voice Command works:
• For each feature explanation in this section, only the
compound command form of the voice command is
1. Say compound commands like “Call John Smith mogiven. You can also break the commands into parts and
bile.”
say each part of the command when you are asked for
2. Say the individual commands and allow the system to
it. For example, you can use the compound command
guide you to complete the task.
form voice command “Search for John Smith,” or you
can break the compound command form into two
You will be prompted for a specific command and then
voice commands: “Search Contact” and when asked
guided through the available options.
“John Smith.” Please remember, the Uconnect® Phone
• Prior to giving a voice command, one must wait for the
works best when you talk in a normal conversational
beep, which follows the “Listen” prompt or another
tone, as if speaking to someone sitting a few feet/
prompt.
meters away from you.
6
186 Uconnect® PHONE
The system utilizes continuous dialog; when the system
Your Uconnect® Phone Voice system uses a Natural requires more information from the user it will ask a
question to which the user can respond without pushing
Language Voice Recognition (VR) engine.
button on your steering
the “Voice Command”
Natural speech allows the user to speak commands in wheel.
phrases or complete sentences. The system filters out
Help Command
certain non-word utterances and sounds such as “ah”
and “eh.” The system handles fill-in words such as If you need assistance at any prompt, or if you want to
know your options at any prompt, say “Help” following
“I would like to.”
the beep.
The system handles multiple inputs in the same phrase
or sentence such as “make a phone call” and “to Kelly To activate the Uconnect® Phone from idle, simply push
button on your steering wheel and say a
Smith.” For multiple inputs in the same phrase or sen- the Phone
tence, the system identifies the topic or context and command or say “help.” All Uconnect® Phone sesbutton on the
provides the associated follow-up prompt such as “Who sions begin with a push of the Phone
do you want to call?” in the case where a phone call was radio control head.
requested but the specific name was not recognized.
Natural Speech
Uconnect® PHONE 187
Cancel Command
At any prompt, after the beep, you can say “Cancel” and
you will be returned to the main menu.
or Voice Command
You can also push the Phone
button on your steering wheel when the system is
listening for a command and be returned to the main
or previous menu.
Pair (Link) Uconnect® Phone To A Mobile Phone
To begin using your Uconnect® Phone, you must pair
your compatible Bluetooth® enabled mobile phone.
To complete the pairing process, you will need to reference NOTE:
your mobile phone Owner’s Manual. The Uconnect® web- • You must have Bluetooth® enabled on your phone to
site may also provide detailed instructions for pairing.
complete this procedure.
• The vehicle must be in PARK.
6
188 Uconnect® PHONE
1. Press the “Phone” button on the touchscreen to begin. 5. When the pairing process has successfully completed,
the system will prompt you to choose whether or not
2. If there is no phone currently connected with the
this is your favorite phone. Selecting Yes will make
system, a pop-up will appear.
this phone the highest priority. This phone will take
precedence over other paired phones within range.
3. Select Yes to begin the pairing process. Then search for
available devices on your Bluetooth® enabled mobile
phone. When prompted on the phone, enter the name
and PIN shown on the Uconnect® screen.
• If No is selected, press the “Settings” button from the
Uconnect® Phone main screen,
• Press the “Add Device” button.
• Search for available devices on your Bluetooth® enabled mobile phone. When prompted on the phone,
enter the name and PIN shown on the Uconnect®
screen,
• See Step 4 to complete the process.
4. Uconnect® Phone will display an in progress screen
while the system is connecting.
Uconnect® PHONE 189
NOTE: For phones which are not made a favorite, the
phone priority is determined by the order in which it was
• Press the “Settings” button on the touchscreen from
paired. The latest phone paired will have the higher
the Phone main screen.
priority.
• Next press the “Phone/Bluetooth®” button on the You can also use the following VR commands to bring up
touchscreen.
the Paired Phone screen from any screen on the radio:
Pair Additional Mobile Phones
• Press the “Add Device” button on the touchscreen.
• “Show Paired Phones” or
• Search for available devices on your Bluetooth® enabled • “Connect My Phone.”
mobile phone. When prompted on the phone, enter the
Pair A Bluetooth® Streaming Audio Device
name and PIN shown on the Uconnect® screen.
• Uconnect® Phone will display an in process screen 1.
while the system is connecting.
2.
• When the pairing process has successfully completed, 3.
the system will prompt you to choose whether or not
this is your favorite phone. Selecting Yes will make this
phone the highest priority. This phone will take pre- 4.
cedence over other paired phones within range.
Press the “Media” button on the touchscreen to begin,
Change the Source to Bluetooth®,
Press the “Bluetooth®” button on the touchscreen to
display the Paired Audio Devices screen,
Press the “Add Device” button on the touchscreen,
6
190 Uconnect® PHONE
NOTE: If there is no device currently connected with the You can also use the following VR command to bring up
system, a pop-up will appear.
a list of paired audio devices.
5. Search for available devices on your Bluetooth® en- • “Show Paired Phones” or
abled audio device. When prompted on the device,
• “Connect My Phone”
enter the PIN shown on the Uconnect® screen,
Connecting To A Particular Mobile Phone Or
6. Uconnect® Phone will display an in process screen
Audio Device After Pairing
while the system is connecting,
Uconnect® Phone will automatically connect to the high7. When the pairing process has successfully completed, est priority paired phone and/or Audio Device within
the system will prompt you to choose whether or not range. If you need to choose a particular phone or Audio
this is your favorite device. Selecting Yes will make Device follow these steps:
this device the highest priority. This device will take
1. Press the “Settings” button on the touchscreen.
precedence over other paired devices within range.
NOTE: For devices which are not made a favorite, the 2. Press the “Paired Phones” or “Paired Audio Sources”
button on the touchscreen.
device priority is determined by the order in which it was
paired. The latest device paired will have the higher
priority.
Uconnect® PHONE 191
3. Press to select the particular Phone or the particular Deleting A Phone Or Audio Device
Audio Device.
1. Press the “Settings” button on the touchscreen.
4. Press the “X” to exit out of the Settings screen.
2. Press the “Pair Phones” or “Paired Audio Devices”
Disconnecting A Phone Or Audio Device
button on the touchscreen.
1. Press the “Settings” button on the touchscreen.
3. Press the settings icon button located to the right of the
device name for a different Phone or Audio Device
2. Press the “Paired Phones” or “Paired Audio Devices”
than the currently connected device.
button on the touchscreen.
4. The options pop-up will be displayed.
3. Press the settings icon button located to the right of the
device name.
5. Press the “Delete Device” button on the touchscreen.
4. The options pop-up will be displayed.
6. Press the “X” to exit out of the Settings screen.
5. Press the “Disconnect Device” button on the touch- Making A Phone Or Audio Device A Favorite
screen.
1. Press the “Settings” button on the touchscreen.
6. Press the “X” to exit out of the Settings screen.
2. Press the “Paired Phones” or “Paired Audio Devices”
button on the touchscreen.
6
192 Uconnect® PHONE
3. Press the settings icon button located to the right of the • To call a name from a downloaded mobile phone book,
follow the procedure in the Voice Recognition Quick
device name.
Reference section.
4. The options pop-up will be displayed.
• Automatic download and update of a phone book, if
5. Press the “Make Favorite” button on the touchscreen;
supported, begins as soon as the Bluetooth® wireless
you will see the chosen device move to the top of the
phone connection is made to the Uconnect® Phone, for
list.
example, after you start the vehicle.
6. Press the “X” to exit out of the Settings screen.
• A maximum of 1000 entries per phone will be downloaded and updated every time a phone is connected
Phonebook Download (Automatic Phonebook
to the Uconnect® Phone.
Transfer From Mobile Phone) — If Equipped
If equipped and specifically supported by your phone, • Depending on the maximum number of entries downUconnect® Phone automatically downloads names (text
loaded, there may be a short delay before the latest
names) and number entries from the mobile phone’s
downloaded names can be used. Until then, if availphonebook. Specific Bluetooth® Phones with Phone Book
able, the previously downloaded phonebook is availAccess Profile may support this feature. See Uconnect®
able for use.
website, UconnectPhone.com, for supported phones.
• Only the phonebook of the currently connected mobile
phone is accessible.
Uconnect® PHONE 193
• This downloaded phonebook cannot be edited or NOTE: If the Favorites list is full, you will be asked to
deleted on the Uconnect® Phone. These can only be remove an existing favorite.
edited on the mobile phone. The changes are trans3. From the Phone main screen, select phonebook. From
ferred and updated to Uconnect® Phone on the next
the phonebook screen, select the “Favorites” button on
phone connection.
the touchscreen and then select the settings icon
button on the touchscreen located to the right of the
Managing Your Favorites
phonebook record. Select an empty entry and press
There are three ways you can add an entry to your
the settings icon on that selected entry. When the
Favorites.
Options pop-up appears, press “Add from Mobile.”
1. During an active call of a number to make a favorite,
You will then be asked which contact and number to
press and hold the preset button on the touchscreen on
choose from your mobile phonebook. When complete
the top of the phone main screen.
the new favorite will be shown.
2. After loading the mobile phonebook, select phonebook from the Phone main screen, then select the
appropriate number. Press the settings icon next to the
selected number to display the options pop-up. In the
pop-up select “Add to Favorites.”
6
194 Uconnect® PHONE
calling, this feature can be accessed through the Uconnect®
Phone. Check with your mobile service provider for the
1. To remove a Favorite, select “phonebook” from the
features that you have.
Phone main screen.
Ways To Initiate A Phone Call
2. Next select “Favorites” on the left side of the screen
and then press the settings icon button on the touch- Listed below are all the ways you can initiate a phone call
with Uconnect® Phone.
screen.
To Remove A Favorite
3. Press the settings icon next to the Favorite you would • Redial
like to remove.
• Dial by pressing in the number
4. The Options pop-up will display, press “Remove from • Voice Commands (Dial by Saying a Name, Call by
Favs.”
Saying a Phonebook Name, Redial or Call Back)
Phone Call Features
• Favorites
The following features can be accessed through the
• Mobile Phonebook
Uconnect® Phone if the feature(s) are available and supported by Bluetooth® on your mobile service plan. For • Recent Call Log
example, if your mobile service plan provides three-way
• SMS Message Viewer
Uconnect® PHONE 195
Dial By Saying A Number
1. Push the “Phone”
to begin.
Call Controls
button on your steering wheel The touchscreen allows you to control the following call
features:
2. After the “Listening” prompt and the following beep, •
say “Dial 151-1234-5555.”
•
3. The Uconnect® Phone will dial the number
•
151-1234-5555.
•
Call By Saying A Phonebook Name
•
1. Push the Phone
button on your steering wheel to
•
begin.
Answer
End
Ignore
Hold/unhold
Mute/unmute
Transfer the call to/from the phone
2. After the “Listening” prompt and the following beep, • Swap two active calls
say “Call John Doe Mobile.”
• Join two active calls together
3. The Uconnect® Phone will dial the number associated
with John Doe, or if there are multiple numbers it will
ask which number you want to call for John Doe.
6
196 Uconnect® PHONE
Touch-Tone Number Entry
Recent Calls
1. Press the “Phone” button on the touchscreen.
You may browse up to 31 of the most recent of each of the
following call types:
2. Press the “Dial” button on the touchscreen.
3. The Touch-Tone screen will be displayed.
• All Calls
• Incoming Calls
4. Use the numbered buttons on the touchscreens to
• Outgoing Calls
enter the number and press “Call.”
To send a touch-tone using Voice Recognition (VR), push
button on your steering
the Voice Command
wheel while in a call and say “Send 1234#” or you can
say “Send Voicemail Password” if Voicemail password
is stored in your mobile phonebook.
• Missed Calls
These can be accessed by pressing the “recent calls”
button on the Phone main screen.
button on your steering wheel
You can also push the
and say “Show my incoming calls” from any screen
and the Incoming calls will be displayed.
NOTE: Incoming can also be replaced with “Outgoing,”
“Recent” or “Missed.”
Uconnect® PHONE 197
NOTE: The Uconnect® Phone compatible phones in the
market today do not support rejecting an incoming call
When you receive a call on your mobile phone, the when another call is in progress. Therefore, the user can
Uconnect® Phone will interrupt the vehicle audio sys- only answer an incoming call or ignore it.
button on the steering wheel to Making A Second Call While Current Call Is In
tem. Push the Phone
accept the call. You can also press the “answer” button Progress
on the touchscreen or press the caller ID box.
You can place a call on hold by pressing the “Hold”
button on the Phone main screen, then dial a number
Answer Or Ignore An Incoming Call — Call
from the dialpad, recent calls, SMS Inbox or from the
Currently In Progress
If a call is currently in progress and you have another phonebooks. To go back to the first call, refer to “Toggling
incoming call, you will hear the same network tones for Between Calls” in this section. To combine two calls, refer
call waiting that you normally hear when using your to “Join Calls” in this section.
Answer Or Ignore An Incoming Call — No Call
Currently In Progress
button on the steering Place/Retrieve A Call From Hold
mobile phone. Push the Phone
wheel, or press the “answer” button on the touchDuring an active call, press the “Hold” button on the
screen, or caller ID box, to place the current call on
Phone main screen.
hold and answer the incoming call.
6
198 Uconnect® PHONE
Toggling Between Calls
Redial
If two calls are in progress (one active and one on hold), Press the “Redial” button on the touchscreen, or push the
button and after the “Listening” prompt and
press the “Swap” button on the Phone main screen. Only Phone
the following beep, say “Redial.”
one call can be placed on hold at a time.
button to toggle be- The Uconnect® Phone will call the last number that was
You can also push the Phone
tween the active and held phone call.
dialed from your mobile phone.
Join Calls
Call Continuation
When two calls are in progress (one active and one on Call continuation is the progression of a phone call on the
hold), press the “Join Calls” button on the Phone main Uconnect® Phone after the vehicle ignition key has been
screen to combine all calls into a Conference Call.
switched to OFF.
Call Termination
To end a call in progress, momentarily push the Phone
button or press the “end” button on the touchscreen. Only the active call(s) will be terminated and if
there is a call on hold, it will become the new active
call.
NOTE: The call will remain within the vehicle audio
system until the phone becomes out of range for the
Bluetooth® connection. It is recommended to press the
“transfer” button on the touchscreen when leaving the
vehicle.
Uconnect® PHONE 199
Uconnect® Phone Features
Voice Mail Calling
Roadside Assistance/Towing Assistance
To learn how to access your voice mail, refer to “Working
with Automated Systems.”
If you need roadside/towing assistance:
1. Push the Phone
button to begin.
Working With Automated Systems
This method is used in instances where one generally has
2. After the “Listening” prompt and the following beep,
to push numbers on the mobile phone keypad while
say “Roadside Assistance” or say “Towing Assistance.”
navigating through an automated telephone system.
NOTE: The roadside/towing assistance number dialed is
You can use your Uconnect® Phone to access a voice mail
based on the country where the vehicle is purchased
system or an automated service, such as a paging service
(1-800-521-2779 for the U.S./Canada, 55-14-3454 for
or automated customer service line. Some services reMexico City and 1-800-712-3040 for outside Mexico City
quire immediate response selection. In some instances,
in Mexico). Please refer to the Chrysler Group LLC
that may be too quick for use of the Uconnect® Phone.
24-Hour “Roadside Assistance” coverage details in the
Warranty Information Booklet and in the Owner’s Infor- When calling a number with your Uconnect® Phone that
mation Manual on the DVD under “Other References.” normally requires you to enter in a touch-tone sequence
on your mobile phone keypad, you can utilize the
6
200 Uconnect® PHONE
button
touchscreen or push the Voice Command
and say the word “Send” then the sequence you wish
to enter. For example, if required to enter your PIN
followed with a pound, (3 7 4 6 #), you can push the
button and say, “Send 3 7 4 6 #.”
Voice Command
Saying “Send” followed by a number, or sequence of
numbers, is also to be used for navigating through an
automated customer service center menu structure,
and to leave a number on a pager.
NOTE:
• The first number encountered for that contact will be
sent. All other numbers entered for that contact will be
ignored.
• You may not hear all of the tones due to mobile phone
network configurations. This is normal.
• Some paging and voice mail systems have system time
out settings that are too short and may not allow the
You can also send stored mobile phonebook entries as
use of this feature.
tones for fast and easy access to voice mail and pager
• Pauses, wait or other characters that are supported by
entries. For example, if you previously created a Phonesome phones are not supported over Bluetooth®.
book entry with First and/or Last Name as “Voicemail
These additional symbols will be ignored in the dialing
Password”, then if you push the Voice Command
a numbered sequence.
button and say “Send Voicemail Password” the
Uconnect® Phone will then send the corresponding
phone number associated with the phonebook entry,
as tones over the phone.
Uconnect® PHONE 201
Barge In — Overriding Prompts
The Voice Command
button can be used when
you wish to skip part of a prompt and issue your voice
command immediately. For example, if a prompt is
asking “There are two numbers with the name John.
Say the full name” you could push the Voice Combutton and say, “John Smith” to select that
mand
option without having to listen to the rest of the voice
prompt.
2. Press the “Display” button on the touchscreen, then
scroll down to Voice Response Length.
3. Select either “Brief” or “Detailed” by pressing the box
next to the selection. A check-mark will appear to
indicate your selection.
Phone And Network Status Indicators
Uconnect® Phone will provide notification to inform you
of your phone and network status when you are attempting to make a phone call using Uconnect® Phone. The
Voice Response Length
status is given for network signal strength and phone
It is possible for you to choose between Brief and battery strength.
Detailed Voice Response Length.
1. Press the “More” button on the touchscreen (where
available), then press the “Settings” button on the
touchscreen.
6
202 Uconnect® PHONE
Dialing Using The Mobile Phone Keypad
WARNING!
Driving while distracted can result in loss of vehicle
control, accident and injury. It is strongly recommended that you use extreme caution when using
any device or feature that may take your focus off the
road or your hands off the steering wheel. Your
primary responsibility is the safe operation of your
vehicle. We recommend against the use of any handheld device while driving, encourage the use of
voice-operated systems when possible and that you
become aware of applicable laws that may affect the
use of electronic devices while driving.
You can dial a phone number with your mobile phone
keypad and still use the Uconnect® Phone (while dialing
via the mobile phone keypad, the user must exercise
caution and take precautionary safety measures). By
dialing a number with your connected Bluetooth® mobile phone, the audio will be played through your
vehicle’s audio system. The Uconnect® Phone will work
the same as if you dial the number using voice a
command.
NOTE: Certain brands of mobile phones do not send the
dial ring to the Uconnect® Phone to play it on the vehicle
audio system, so you will not hear it. Under this situation, after successfully dialing a number the user may feel
that the call did not go through even though the call is in
progress. Once your call is answered, you will hear the
audio.
Mute/Un-Mute (Mute ON/OFF)
When you mute the Uconnect® Phone, you will still be
able to hear the conversation coming from the other
party, but the other party will not be able to hear you. To
mute the Uconnect® Phone simply press the “Mute”
button on the Phone main screen.
Uconnect® PHONE 203
Advanced Phone Connectivity
Transfer Call To And From Mobile Phone
Things You Should Know About Your Uconnect®
Phone
The Uconnect® Phone allows ongoing calls to be trans- Voice Command
ferred from your mobile phone to the Uconnect® Phone For the best performance:
without terminating the call. To transfer an ongoing call
• Adjust the rearview mirror to provide at least ½ inch
from your connected mobile phone to the Uconnect®
(1 cm) gap between the overhead console (if equipped)
Phone or vice versa, press the “Transfer” button on the
and the mirror.
Phone main screen.
• Always wait for the beep before speaking.
Connect Or Disconnect Link Between The
Uconnect® Phone And Mobile Phone
• Speak normally, without pausing, just as you would
speak to a person sitting a few feet/meters away from
If you would like to connect or disconnect the Bluetooth®
you.
connection between a Uconnect® Phone paired mobile
phone and the Uconnect® Phone, follow the instructions • Ensure that no one other than you is speaking during
described in your mobile phone User’s Manual.
a voice command period.
6
204 Uconnect® PHONE
Performance is maximized under:
• Low-To-Medium Blower Setting
• Low-To-Medium Vehicle Speed
• Low Road Noise
• Smooth Road Surface
• Fully Closed Windows
• Dry Weather Condition
Even though the system is designed for many languages
and accents, the system may not always work for some.
When navigating through an automated system such as
voice mail, or when sending a page, before speaking the
digit string, make sure to say “Send.”
NOTE: It is recommended that you do not store names in
your favorites phonebook while the vehicle is in motion.
Phonebook (Mobile and Favorites) name recognition rate
is optimized when the entries are not similar. You can say
“O” (letter “O”) for “0” (zero).
Even though international dialing for most number combinations is supported, some shortcut dialing number
combinations may not be supported.
Uconnect® PHONE 205
Far End Audio Performance
Audio quality is maximized under:
• Low-To-Medium Blower Setting
• Low-To-Medium Vehicle Speed
• Low Road Noise
• Smooth Road Surface
• Fully Closed Windows
• Dry Weather Conditions
• Operation From The Driver’s Seat
In a convertible vehicle, system performance may be
compromised with the convertible top down.
Voice Texting
Uconnect® Phone can read or send new messages on
your phone.
Your phone must support Voice Texting over Bluetooth®
in order to use this feature. If the Uconnect® Phone
determines your phone is not compatible with Voice
Texting messaging over Bluetooth® the “Messaging”
button will be greyed out and the feature will not be
available for use.
NOTE: Uconnect® Phone Voice Texting is only available
Performance such as audio clarity, echo, and loudness to
when the vehicle is not in moving.
a large degree rely on the phone and network, and not
the Uconnect® Phone.
Echo at the far end can sometimes be reduced by
lowering the in-vehicle audio volume.
6
206 Uconnect® PHONE
Read Messages:
• Press one of the 18 preset messages and the person you
wish to send the message to,
If you receive a new text message while your phone is
connected to Uconnect® Phone, an announcement will • If multiple numbers are available for the contact select
be made to notify you that you have a new text message.
which number you would like to have the message
sent,
Once a message is received and viewed or listened to,
you will have the following options:
• Press “Send” or “Cancel”.
• Send a Reply
Send Messages Using Voice Commands:
• Call
• After the “Listening” prompt and the following beep,
say “Send message to John Smith mobile”,
You can send messages using Uconnect® Phone. To send
a new message:
• After the system prompts you for what message you
want to send, say the message you wish to send or say
“List”. There are 18 preset messages.
• Forward
Send Messages Using Buttons On The Touchscreen:
• Press the “Phone” Button on the touchscreen,
• Press the
button,
While the list of defined messages are being read, you can
button and
• Press the “messaging” button on the touchscreen then interrupt the system by pressing the
saying the message you want to send.
“New Message”,
Uconnect® PHONE 207
After the system confirms that you want to send your 9. I’ll be late.
message to John Smith, your message will be sent.
10. I will be <number> minutes late.
List of Preset Messages:
11. See you in <number> minutes.
1. Yes.
12. Stuck in traffic.
2. No.
13. Start without me.
3. Okay.
14. Where are you?
4. I can’t talk right now.
15. Are you there yet?
5. Call me.
16. I need directions.
6. I’ll call you later.
17. I’m lost.
7. I’m on my way.
18. See you later.
8. Thanks.
6
208 Uconnect® PHONE
Bluetooth® Communication Link
General Information
Mobile phones have been found to lose connection to the
Uconnect® Phone. When this happens, the connection
can generally be re-established by switching the mobile
phone OFF/ON. Your mobile phone is recommended to
remain in Bluetooth® ON mode.
This device complies with Part 15 of the FCC rules and
RSS 210 of Industry Canada. Operation is subject to the
following conditions:
Power-Up
• Changes or modifications not expressly approved by
the party responsible for compliance could void the
user’s authority to operate the equipment.
After switching the ignition key from OFF to either the • This device may not cause harmful interference.
ON or ACC position, or after a language change, you
must wait at least 15 seconds prior to using the system. • This device must accept any interference received,
including interference that may cause undesired operation.
Uconnect® 6.5A/6.5AN VOICE RECOGNITION QUICK
TIPS
CONTENTS
! Uconnect® VOICE RECOGNITION . . . . . . . . . .210
▫ Media. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .213
▫ Introducing Uconnect® . . . . . . . . . . . . . . . . .210
▫ Navigation . . . . . . . . . . . . . . . . . . . . . . . . . .214
▫ Get Started . . . . . . . . . . . . . . . . . . . . . . . . . .210
▫ Phone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .215
▫ Basic Voice Commands. . . . . . . . . . . . . . . . . .211
▫ Voice Text Reply . . . . . . . . . . . . . . . . . . . . . .216
▫ Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .212
▫ Additional Information . . . . . . . . . . . . . . . . .217
7
210 Uconnect® 6.5A/6.5AN VOICE RECOGNITION QUICK TIPS
Uconnect® VOICE RECOGNITION
Get Started
Introducing Uconnect®
All you need to control your Uconnect® system with
your voice are the buttons on your steering wheel.
Start using Uconnect® Voice Recognition with these
helpful quick tips. It provides the key Voice Commands 1. Visit UconnectPhone.com to check mobile device
and feature compatibility and to find phone pairing
and tips you need to know to control your Uconnect®
instructions.
6.5A or 6.5AN systems.
2. Reduce background noise. Wind and passenger conversations are examples of noise that may impact
recognition.
3. Speak clearly at a normal pace and volume while
facing straight ahead. The microphone is positioned
on the rearview mirror and aimed at the driver.
4. Each time you give a Voice Command, you must first
press either the VR or Phone button, wait until after
the beep, then say your Voice Command.
5. You can interrupt the help message or system prompts
by pressing the VR or Phone button and saying a Voice
Command from current category.
Uconnect® 6.5A/6.5AN VOICE RECOGNITION QUICK TIPS 211
Basic Voice Commands
The basic Voice Commands below can be given at any
point while using your Uconnect® system.
Press the VR button
. After the beep, say%
• Cancel to stop a current voice session
• Help to hear a list of suggested Voice Commands
• Repeat to listen to the system prompts again
Uconnect® Voice Command Buttons
1 — Push To Initiate Or To Answer A Phone Call, Send Or
Receive A Text
2 — Push To Begin Radio, Navigation, or Media functions
3 — Push To End Call
7
212 Uconnect® 6.5A/6.5AN VOICE RECOGNITION QUICK TIPS
Notice the visual cues that inform you of your voice Radio
recognition system’s status.
Use your voice to quickly get to the AM, FM or SiriusXM
Satellite Radio stations you would like to hear. (Subscription or included SiriusXM Satellite Radio trial required.)
Press the VR button
. After the beep, say%
• Tune to ninety-five-point-five FM
• Tune to Satellite Channel Hits 1
Uconnect® 6.5A/6.5AN VOICE RECOGNITION QUICK TIPS 213
TIP: At any time, if you are not sure of what to say or Media
want to learn a Voice Command, press the VR button and
Uconnect® offers connections via USB, Bluetooth® and
say “Help.” The system will provide you with a list of
auxiliary ports. Voice operation is only available for
commands.
connected USB and iPod® devices. (Remote CD player
optional and not available on all vehicles.)
. After the beep, say one of the
Press the VR button
following commands and follow the prompts to
switch your media source or choose an artist.
• Change source to Bluetooth®
• Change source to iPod®
• Change source to USB
• Play artist Beethoven; Play album Greatest Hits; Play
song Moonlight Sonata; Play genre Classical
7
214 Uconnect® 6.5A/6.5AN VOICE RECOGNITION QUICK TIPS
TIP: Press the Browse button on the touchscreen to see all Navigation
of the music on your iPod® or USB device. Your Voice
The Uconnect® navigation feature helps you save time
Command must match exactly how the artist, album,
and become more productive when you know exactly
song and genre information is displayed.
how to get to where you want to go.
. After
1. To enter a destination, press the VR button
the beep, say%
• For the 6.5AN Uconnect® System, say... “Navigate to
800 Chrysler Drive Auburn Hills, Michigan”
2. Then follow the system prompts.
Uconnect® 6.5A/6.5AN VOICE RECOGNITION QUICK TIPS 215
TIP: To start a POI search, press the VR button
After the beep, say “ Find nearest coffee shop.”
.
Phone
Making and answering hands-free phone calls is easy
with Uconnect®. When the Phonebook button is illuminated on your touchscreen, your system is ready. Check
UconnectPhone.com for mobile phone compatibility
and pairing instructions.
. After the beep, say one of
Press the Phone button
the following commands%
• Call John Smith
• Dial 123-456-7890 and follow the system prompts
• Redial (call previous outgoing phone number)
• Call back (call previous incoming phone number)
7
216 Uconnect® 6.5A/6.5AN VOICE RECOGNITION QUICK TIPS
TIP: When providing a Voice Command, press the Phone
and say “Call,” then pronounce the name
button
exactly as it appears in your phone book. When a
contact has multiple phone numbers, you can say
“Call John Smith work.”
Voice Text Reply
Uconnect® will announce incoming text messages. Press
and say Listen. (Must have comthe Phone button
patible mobile phone paired to Uconnect® system.)
1. Once an incoming text message is read to you, press
. After the beep, say... “Reply”
the Phone button
2. Listen to the Uconnect® prompts. After the beep,
repeat one of the pre-defined messages and follow the
system prompts.
Uconnect® 6.5A/6.5AN VOICE RECOGNITION QUICK TIPS 217
PRE-DEFINED VOICE TEXT REPLY RESPONSES
Yes.
Stuck in Traffic.
See you later.
Can’t talk right
Start without
I’ll be Late.
now.
me.
See you in
I will be <numOkay.
<number> of
ber> minutes
Call me.
minutes.
late.
I’ll call you
I need
Where are you?
later.
directions.
I’m on my way.
No.
Are you there
yet?
I’m lost.
Thanks.
Additional Information
© 2014 Chrysler Group LLC. All rights reserved. Mopar®
and Uconnect® are registered trademarks and Mopar
Owner Connect is a trademark of Chrysler Group LLC.
Android is a trademark of Google Inc. SiriusXM and all
related marks and logos are trademarks of SiriusXM
Radio Inc. Yelp, Yelp logo, Yelp burst and related marks
are registered trademarks of Yelp®.
DriveUconnect.com
Uconnect® System Support 1-877-855-8400
Mon. – Fri., 7:00 am – 12:00 am, ET
TIP: Your mobile phone must have the full implementaSat., 8:00 am – 10:00 pm, ET
tion of the Message Access Profile (MAP) to take
advantage of this feature. For details about MAP, visit Sun., 9:00 am – 5:00 pm, ET
UconnectPhone.com. Apple iPhone® iOS6 or later supUconnect® Access Services Support 1-855-792-4241.
ports reading incoming text messages only.
Please have your Uconnect® Security PIN ready when
you call.
7
NAVIGATION
CONTENTS
! GETTING STARTED . . . . . . . . . . . . . . . . . . . . .221
▫ Where To? — GEO Coordinate . . . . . . . . . . . .231
! MAIN MENU . . . . . . . . . . . . . . . . . . . . . . . . .221
▫ Where To? — Point On Map . . . . . . . . . . . . . .232
! WHERE TO? . . . . . . . . . . . . . . . . . . . . . . . . . .222
▫ Where To? — City Center . . . . . . . . . . . . . . . .233
▫ Where To? — Address . . . . . . . . . . . . . . . . . .224
▫ Where To? — Closest City . . . . . . . . . . . . . . .233
▫ Where To? — Recent . . . . . . . . . . . . . . . . . . .225
▫ Where To? — Trails . . . . . . . . . . . . . . . . . . . .234
▫ Where To? — Point Of Interest . . . . . . . . . . . .226
▫ Where To? — Phone . . . . . . . . . . . . . . . . . . .234
▫ Where To? — Favorite Destinations . . . . . . . . .227
▫ Before Route Guidance. . . . . . . . . . . . . . . . . .234
▫ Where To? — Intersection. . . . . . . . . . . . . . . .228 ! VIEW MAP . . . . . . . . . . . . . . . . . . . . . . . . . . .235
▫ Where To? — Go Home . . . . . . . . . . . . . . . . .229 ! VIEW MAP — SETTINGS . . . . . . . . . . . . . . . . .238
▫ Where To? — Trips . . . . . . . . . . . . . . . . . . . .230
▫ Settings — Map Setup . . . . . . . . . . . . . . . . . .239
8
220 NAVIGATION
▫ Settings — Guidance . . . . . . . . . . . . . . . . . . .241 ! EMERGENCY . . . . . . . . . . . . . . . . . . . . . . . . .245
! INFORMATION . . . . . . . . . . . . . . . . . . . . . . . .243
▫ Emergency — Hospital. . . . . . . . . . . . . . . . . .245
▫ Information — Where Am I?. . . . . . . . . . . . . .244
▫ Emergency — Police . . . . . . . . . . . . . . . . . . .246
▫ Information — Trip Computer . . . . . . . . . . . .244
▫ Emergency — Fire Department . . . . . . . . . . . .247
NAVIGATION 221
GETTING STARTED
MAIN MENU
To access the Navigation system, push the “Nav” button • Press “Where To?” to find or route to a destination.
below the screen.
• Press “View Map” to view the map.
NOTE: If your Navigation system has not been activated,
• Press “Information” to view Traffic, Where Am I? and
see your authorized dealer for details.
Trip Computer information.
• Press “Emergency” to search for Hospitals, Police and
Fire Stations near your current location. You can also
display your current location and save any Emergency
facility location to your Favorites.
• Press “Stop” to stop a route.
• Press “Detour” to detour a route.
8
222 NAVIGATION
WHERE TO?
Point Of Interest
From the Nav Main Menu, press the Where To? button Press this button when you want to route to a point of
and select one of the following methods to program a interest. The Point of Interest database allows you to
route guidance.
select a destination from a list of locations and public
NOTE: Refer to the individual section of the chosen places, or points of interest (POI).
option for further information.
Favorites
Address
Press this button to access previously saved addresses or
Press this button to search by a street address or a street locations.
name with house number.
Intersection
Recent
Press this button to enter in two street names as a
Press this button to access previously routed addresses or destination.
locations.
Go Home
Press this button to program or confirm a route to the
saved home address.
NAVIGATION 223
Trips
City Center
Press this button to program a new trip or recall a saved Press this button to route to a particular city. The navitrip.
gation system will calculate a route with the destination
at the center of the city.
GEO Coordinates
Trails
Press this button to route to a GEO Coordinate. A geo
coordinate is a coordinate used in geography. You can Press the “Trails” button and select the option to start
determine a geo coordinate with the help of a handheld trail recording to track the route you are driving. Select
GPS receiver, a map or the navigation system.
the option to “stop trail recording” to end tracking. This
gives you a point of reference to for a particular route if
Point On Map
needed.
Press this button to select a destination directly from the
Closest City
Map screen. By selecting a street segment or icon, you can
quickly enter a destination without the need to input the Press this button to route to a nearby city. The screen will
city name or street.
display an alphabetical listing of nearby cities. The navigation system will calculate a route with the destination
at the center of the nearby city.
8
224 NAVIGATION
Phone Number
Press this button to route to a location or point of interest
by the phone number.
NOTE: You can press the “Back Arrow” button to return
to the previous screen or the “X” button to exit.
Where To? — Address
To enter a destination by Address, follow these steps:
2. Press “Spell City” or “Spell Street” to begin entering
the address of your destination.
If you press Spell City, you will have to enter and
select/press the desired city name, followed by the
desired street name and lastly the house number.
If you press Spell Street, you will have to enter and
select/press the desired street name in the correct city
and then you will have to enter the house number.
1. While in the Nav Main Menu, press the “Where To?” 3. Once the correct City, Street and Number has been
entered, you will be asked to confirm your destination
button and then press the “Address” button.
by pressing “OK.”
NOTE: To change the state and/or country, press the
state, country button and follow the prompts to change 4. Press the “Yes” button to confirm your destination and
begin your route.
the state and/or country.
NAVIGATION 225
NOTE: If you are currently on a route guidance and you To delete a destination from the list, press the “Trash
select “Recent”, the system will ask you to choose one of Can” icon button.
the following:
To display the options for a destination press the “Options” button that looks like a gear.
• Cancel previous route
• Add as first destination
• Add as last destination
The following Options are available for each destination:
• Edit Name
You can press the “Back Arrow” button to return to the • Add Phone Number
previous screen or the “X” button to exit.
• Move Up in the list
Where To? — Recent
• Move Down in the list
To route to a recent destination, press the “Recent” button • Place Pin on the location (saves the spot on the list)
in the NAV Main Menu.
NOTE: You can press the “Back Arrow” button to return
Press the button with the name of the desired destination.
to the previous screen or the “X” button to exit.
Confirm the route with “Yes” to start the route guidance.
8
226 NAVIGATION
You can also change your POI search area by pressing the
To enter a destination by Point of Interest (POI) press the “Change Search Area” button. You will have the following options to change your search area:
“Point of Interest” button in the Nav Main Menu.
Where To? — Point Of Interest
The Point of Interest database allows you to select a • Around Me
destination from a list of locations and public places or • In a City
points of interest (POI).
• Near Destination (only available during route
You have the following POIs to choose from:
guidance)
• Gas Stations
• Along Route (only available during route guidance)
• Restaurants
• Hotels/Motels
• ATM/Banking
• All POIs
• Spell POI Name
NOTE: You can press the “Back Arrow” button to return
to the previous screen or the “X” button to exit.
NAVIGATION 227
The following Options are available for each favorite
To route to a favorite destination, press the “Favorites” destination:
button in the NAV Main Menu.
• Edit Name
Where To? — Favorite Destinations
Press the button with the name of the desired favorite • Add Phone Number
destination and confirm the route with “Yes” to start the
NOTE: If you are currently on a route guidance and you
route guidance.
select a Favorite, the system will ask you to choose one of
To delete a destination from the list, press the “Trash the following:
Can” icon button.
• Cancel previous route
To save a favorite destination, press the “Add Favorite”
• Add as first destination
button and follow the steps to route a destination.
To display the options for a favorite destination press the • Add as last destination
“Options” button that looks like a gear.
You can press the “Back Arrow” button to return to the
previous screen or the “X” button to exit.
8
228 NAVIGATION
Where To? — Intersection
To enter a destination by Intersection, follow these steps:
1. While in the Nav Main Menu, press the “Where To?”
button and then press the “Intersection” button.
3. Once the correct City and Intersection has been entered, you will be asked to confirm your destination.
4. Press the “Yes” button to confirm your destination and
begin your route.
This menu shows the default country and state setting. NOTE: If you are currently on a route guidance and you
select a Intersection, the system will ask you to choose
NOTE: To change the state and/or country, press the one of the following:
“state”, “country” button and follow the prompts to
• Cancel previous route
change the state and/or country.
2. This menu shows the default country and state settings.
• Add as first destination
If you press “Spell City”, you will have to enter and • Add as last destination
select/press the desired city name, followed by the You can press the “Back Arrow” button to return to the
desired street name and lastly you will have to enter
previous screen or the “X” button to exit.
the intersection street.
If you press “Spell Street”, you will have to enter and
select/press the desired street name in the correct city
and then you will have to enter the intersecting street.
NAVIGATION 229
Where To? — Go Home
To enter your Home Address, follow these steps:
• City Center
• Closest Cities
• Phone Number
1. While in the Nav Main Menu, press the Where To?
button and then press the Go Home button. If there is 3. Once you have generated your Home Address, you
will be asked to Save it.
no Home Address entered, press “Yes” to enter it now.
2. To set your set your Home Address choose one of the 4. Press the “Save” button to confirm your destination
and begin the route to your Home Address.
following options:
NOTE: Refer to the individual section of the chosen 5. This address will be saved as your Home Address and
it can be accessed by pressing the “Go Home” button
option for further information.
in the Where To? Menu.
• Address
• Recent
Change/Delete Your Home Address
• Point of Interest
To change or delete your current Home Address perform
• Favorites
the following:
• Intersection
1. Press the “Go Home” button in the Where To? Menu.
• GEO Coordinates
2. Press the “Options” button at the bottom of the
• Point on Map
displayed map.
8
230 NAVIGATION
3. Press “Clear Home” and then “Yes” to clear/delete 3. Press “Add Destination” to add destinations to your
trip.
your Home Address.
4. To enter in a new Home Address, follow the Where 4. Choose from the following options to add a destination.
To? – Go Home procedure.
NOTE: You can press the “Back Arrow” button to return NOTE: Refer to the individual section of the chosen
option for further information.
to the previous screen or the “X” button to exit.
• Address
Where To? — Trips
• Recent
To route to a saved Trip, press the “Recent” button in the
• Point of Interest
NAV Main Menu.
• Favorites
Press the button with the name of the desired Trip and
• Intersection
press the first destination in the list. Confirm the route by
• GEO Coordinates
pressing “Yes” to start the route guidance.
• Point on Map
To add a Trip, follow these steps:
• City Center
1. Press the “Create new Trip” button.
• Closest Cities
• Phone Number
2. Type in the new Trip Name.
NAVIGATION 231
5. Add more needed destinations to your trip.
Where To? — GEO Coordinate
NOTE: Each destination will be listed in order, with the To enter a destination by GEO Coordinate, press “Where
To?” in the Nav Main Menu and then press the “GEO
last destination being the final destination.
Coordinate” button.
6. Your new Trip will appear on the Trips list.
1. Enter the Latitude by typing in the numbers. Use the
To delete a Trip from the list, press the “Trash Can” icon
“Left and Right” arrows to select specific numbers in
button.
the location shown.
To display the options for a trip press the “Options”
2. Press the “OK” button.
button that looks like a gear.
3. Enter the Longitude by typing in the numbers. Use the
The following Options are available for each trip:
“Left and Right” arrows to select specific numbers in
• Edit Name
the location shown.
• Move Up in the list
• Move Down in the list
NOTE: Press the “Format” button to change the format of
the Latitude/Longitude entry.
NOTE: You can press the “Back Arrow” button to return 4. Press “OK” to confirm the destination.
to the previous screen or the “X” button to exit.
5. Press the “Yes” button to confirm your destination and
begin your route.
8
232 NAVIGATION
NOTE: If you are currently on a route guidance and you 2. Either press the “address bar” at the top center of the
screen to confirm your location or press the “Details”
select a GEO Coordinate, the system will ask you to
button in the upper right corner to display the availchoose one of the following:
able locations near that point on the map.
• Cancel previous route
3. Press the “Yes” button to confirm your destination and
• Add as first destination
begin your route.
• Add as last destination
NOTE: If you are currently on a route guidance and you
You can press the “Back Arrow” button to return to the select a Point on Map, the system will ask you to choose
previous screen or the “X” button to exit.
one of the following:
Where To? — Point On Map
• Cancel previous route
To enter a destination by Point on Map, press “Where • Add as first destination
To?” in the Nav Main Menu and then press the “Point on
• Add as last destination
Map” button.
You can press the “Back Arrow” button to return to the
1. Use the touchscreen to drag the center of the cross
previous screen or the “X” button to exit.
over the desired destination.
NAVIGATION 233
Where To? — City Center
Where To? — Closest City
To enter a destination by City Center, press “Where To?” To enter a destination by Closest City, press “Where To?”
in the Nav Main Menu and then press the “City Center” in the Nav Main Menu and then press the “Closest City”
button.
button.
1. Enter the name of the City you would like to route to. 1. Press the desired city from the list.
2. Press the desired city from the list.
2. Press the “Yes” button to confirm your destination and
begin your route.
3. Press the “Yes” button to confirm your destination and
begin your route.
NOTE: If you are currently on a route guidance and you
select a Closest City, the system will ask you to choose
NOTE: If you are currently on a route guidance and you
one of the following:
select a City Center, the system will ask you to choose one
of the following:
• Cancel previous route
• Cancel previous route
• Add as first destination
• Add as last destination
• Add as first destination
• Add as last destination
You can press the “Back Arrow” button to return to the
You can press the “Back Arrow” button to return to the previous screen or the “X” button to exit.
previous screen or the “X” button to exit.
8
234 NAVIGATION
NOTE: If you are currently on a route guidance and you
select a Phone number destination, the system will ask
When starting to drive a trail you want to record, press
you to choose one of the following:
“Trails”, and then press “Start Trail Recording.”
When you want to end the recording of a route, press • Cancel previous route
Where To? — Trails
“Stop Trail Recording.”
• Add as first destination
The trip you recorded will be added to the Recent Trails • Add as last destination
list.
You can press the “Back Arrow” button to return to the
Where To? — Phone
previous screen or the “X” button to exit.
To enter a destination by Phone number, press “Where Before Route Guidance
To?” in the Nav Main Menu and then press the “Phone
Before confirming the route with the “Yes” button, it is
Number” button.
possible to select options different from the default route
1. Enter the Phone Number of the destination you would settings.
like to route to.
• Options – Press the “Options” button to display a list
2. Press the desired destination from the list.
of options to alter your route. To make a selection press
and release the desired setting until a check-mark
3. Press the “Yes” button to confirm your destination and
appears.
begin your route.
NAVIGATION 235
• Avoid – Press the “Avoid” button to choose road types VIEW MAP
to avoid during your route. To make a selection press Press the “View Map” button from the Nav Main Menu
and release the desired setting until a check-mark to display a map of your current position.
appears.
With the map displayed you have the following features
NOTE: Since toll roads, tunnels and ferries are built for available.
the purpose of shortening travel distances, avoiding
these road types may increase distance and travel time. Menu
• Save – Press the “Save” button to save the destination Press this button to return to the Nav Main Menu.
as a Favorite.
Zoom In +/ Zoom Out –
Press the “Yes” button to confirm your destination and to
Press the Zoom In (+) or Zoom Out (–) buttons to change
start your route guidance.
the zoom level. Roads with lower functional classification
NOTE: You can press the “Back Arrow” button to return are not shown in higher zoom levels. (e.g. residential
streets, lightly-traveled county roads.)
to the previous screen or the “X” button to exit.
8
236 NAVIGATION
Time Of Arrival/Time To Destination/Distance
(Only During Route Guidance)
Options (Only During Route Guidance)
Press the “Options” button to display the following
Press the button in the upper right area of the screen to the options. Press the desired button.
display items available. Press the desired option button.
• Time of Arrival
• Time to Destination
• Distance
Turn List (Only During Route Guidance)
Press the area in the upper center part of the screen that
displays your next turn to see a Turn List for your current
route.
Press a turn in the displayed Turn List for the following
options:
2D North Up/Map View 2D
• Show on Map
• Avoid Street
Press this button to scroll between the two viewing
options.
NAVIGATION 237
Settings
Where Am I?
Press this button to view all the available settings. See Press the area in the lower center part of the screen that
View Map – Settings for more information.
displays your current location to view the Where Am I?
view.
Repeat Directions
Where Am I? displays the address and GEO Coordinates
Press this button to repeat the current voice prompt.
of your current location.
Turn List
• Press the “GPS” button to view the GPS information.
Press this button to view the turn list for the current
• Press the “Save” button to save the location in your
route.
Favorites.
Stop Guidance
NOTE: You can press the “Back Arrow” button to return
Press this button to stop route guidance.
to the previous screen or the “X” button to exit.
8
238 NAVIGATION
VIEW MAP — SETTINGS
Guidance Options
With the Map displayed, press the “Options” button and Press this button to display items to customize your route
then press the “Settings” button. You can also access this guidance. Settings – Guidance Options for more information.
menu by pressing the “Settings” button in the lower right
Units
of the Nav Main Menu.
Press this button to change the units display. Press the
The following Map Settings are available.
desired button.
Map Setup
• U.S. (mile/feet)
Press this button to display items to customize how your • Imperial (mile/yard)
map is viewed. Settings – Map Setup for more informa• Metric (meter)
tion.
GPS
Speed Limit
Press this button to change the GPS display. Press the
Press this button to turn on/off speed limit warning
desired button.
announcements and to enter a predefined speed limit for
• Decimal
your route.
• DMS
• DM
NAVIGATION 239
Copy Device Information To USB? (If Equipped)
• Current Street
Press this button to copy your radio information to a USB Press this button on the touchscreen to turn on/off the
current street display on the lower center of the Map
jump drive through the available USB port.
View. Press and release the button on the touchscreen
Settings — Map Setup
until a check-mark appears, showing the setting has been
With the Map displayed, press the “Options” button on the selected.
touchscreen, then press the “Settings” button on the touch• Destination Information
screen and then the “Map Setup” button on the touchscreen.
You can also access this menu by pressing the “Settings” Press this button on the touchscreen to change the
Destination Information that is displayed in the upper
button in the lower right of the Nav Main Menu.
right corner of the Map View. Press the desired button on
The following Map Setup options are available.
the touchscreen.
• Orientation
Time of Arrival
Press this button on the touchscreen to change how the
Time to Destination
Map Orientation is displayed. Press the desired button on
Distance
the touchscreen.
North Up
Heading Up
8
240 NAVIGATION
• AutoZoom
Press this button on the touchscreen to change how the
AutoZoom feature adjust the zoom level during guidance in Map View. Press the desired button on the
touchscreen.
Far
Normal
Near
Off
• Vehicle Icon
Press this button on the touchscreen to change the vehicle
icon that is displayed while in Map View. Press “Previous” or “Next” to view the available icons. Press the
“back” icon button on the touchscreen when you’ve
made you selection.
• Show POI Icons
Press this button on the touchscreen to show the selected
Point of Interest icons while in Map View. Press and
release the button on the touchscreen until a check-mark
appears, showing the setting has been selected.
• POI Icon List
Press this button on the touchscreen to display the
available Point of Interest icons you would like displayed
while in Map View. Press and release the desired selection button on the touchscreen until a check-mark appears, showing the setting has been selected.
• TMC Incidents
Press this button on the touchscreen to show Traffic Message Channel (TMC) Incidents while in Map View. Press
and release the button on the touchscreen until a checkmark appears, showing the setting has been selected.
NAVIGATION 241
• Park Areas
Press this button on the touchscreen to display Park
Areas while in Map View. Press and release the button on
the touchscreen until a check-mark appears, showing the
setting has been selected.
• River Names
Press this button on the touchscreen to display River
Names while in Map View. Press and release the button
on the touchscreen until a check-mark appears, showing
the setting has been selected.
• Railroads
NOTE: You can press the “back arrow” button on the
Press this button on the touchscreen to display Railroad touchscreen to return to the previous screen or the “X”
button on the touchscreen to exit.
tracks while in Map View. Press and release the button on
the touchscreen until a check-mark appears, showing the Settings — Guidance
setting has been selected.
With the Map displayed, press the “Options” button on
• City Areas
the touchscreen, then press the “Settings” button on the
touchscreen and then the “Guidance” button on the
Press this button on the touchscreen to display City Areas
touchscreen. You can also access this menu by pressing
while in Map View. Press and release the button on the
the “Settings” button in the lower right of the Nav Main
touchscreen until a check-mark appears, showing the
Menu.
setting has been selected.
8
242 NAVIGATION
The following Guidance options are available.
• Play Voice Guidance Prompts
• Junction View
Press this button on the touchscreen to enable Junction
Press this button on the touchscreen to enable Voice View during route guidance. Press and release the button
Guidance Prompts during route guidance. Press and on the touchscreen until a check-mark appears, showing
release the button on the touchscreen until a check-mark the setting has been selected.
appears, showing the setting has been selected.
• Navigation Turn-by-Turn Displayed In Cluster
• Nav Volume Adjustment
Press this button on the touchscreen to enable navigation
Press the “+” or “–” buttons on the touchscreen to adjust turn-by-turn displayed in vehicles cluster during route
guidance. Press and release the button on the touchscreen
the Nav Voice Prompt Volume.
until a check-mark appears, showing the setting has been
• Lane Recommendation
selected.
Press this button on the touchscreen to enable Lane
Recommendation during route guidance. Press and release the button on the touchscreen until a check-mark
appears, showing the setting has been selected.
NAVIGATION 243
• TMC Route Mode (If Equipped)
Press this button on the touchscreen to change how the
Traffic Message Channel (TMC) Route Mode functions
during route guidance. Press the desired button on the
touchscreen.
Automatic
By Delay Time
Manual
Off
• TMC Avoidance Types (IF Equipped)
Press this button on the touchscreen to display the
available Traffic Message Channel (TMC) Avoidance
Types you would like displayed while in route guidance.
Press and release the desired selection button on the
touchscreen until a check-mark appears, showing the
setting has been selected.
• Avoid
Press the Avoid button on the touchscreen to choose road
types to avoid during your route. To make a selection
press and release the desired setting until a check-mark
appears.
NOTE: You can press the “back arrow” button on the
touchscreen to return to the previous screen or the “X”
button on the touchscreen to exit.
INFORMATION
From the Nav Main Menu, push the “Information”
button and select one of the following options to view
additional information.
• Traffic
• Where Am I?
• Trip Computer
8
244 NAVIGATION
NOTE: You can push the “Back Arrow” button to return Information — Trip Computer
to the previous screen or the “X” button to exit.
To select Trip Computer information, press the “Information” button from the Nav Main Menu and then press the
Information — Where Am I?
“Trip Computer” button.
To select Where Am I? information, press the “Information” button from the Nav Main Menu and then press the Trip Computer displays the following trip information
from your last trip:
“Where Am I?” button.
Where Am I? displays the address and GEO Coordinates • Travel Direction
of your current location.
• Distance To Final Destination
• Press the “GPS” button to view the GPS information. • Vehicle Speed
• Press the “Save” button to save the location in your •
Favorites.
•
NOTE: You can press the “Back Arrow” button to return
•
to the previous screen or the “X” button to exit.
•
Distance Traveled
Overall Average Speed
Moving Average Speed
Maximum Speed Reached
• Total Time Traveled
NAVIGATION 245
• Travel Time Spent Moving
• Travel Time Spent Stopped
Press the “Save” button to save your current location in
Favorites.
NOTE: You can press the “Back Arrow” button to return
NOTE: You can press the “Back Arrow” button to return
to the previous screen or the “X” button to exit.
to the previous screen or the “X” button to exit.
Emergency — Hospital
EMERGENCY
To search for a Hospital close to your current location,
From the Nav Main Menu, press the “Emergency” button press “Emergency” from the Nav Main Menu and then
and press one of the following options to search and press the “Hospital” button.
route to a specific location.
You can search for a Hospital by the following categories,
• Hospital – Search and route to a Hospital close to your which are button tabs at the top of the screen.
current location
• Name
• Police – Search and route to a Police Station close to
• Distance
your current location
• Fire Department – Search and route a Fire Department • ABC (Search)
close to your current location
NOTE: In case of emergency, please contact the facility to
Press the “Location” button to display your exact current verify their availability before proceeding.
location.
8
246 NAVIGATION
Press the desired Hospital and press “Yes” to confirm the You can search for a Police Station by the following
categories, which are button tabs at the top of the screen.
destination.
NOTE: If you are currently on a route guidance and you • Name
select a Hospital the system will ask you to choose one of • Distance
the following:
• ABC (Search)
• Cancel previous route
NOTE: In case of emergency, please contact the facility
• Add as first destination
to verify their availability before proceeding.
• Add as last destination
Press the desired Police Station and press “Yes” to
You can press the “Back Arrow” button to return to the confirm the destination.
previous screen or the “X” button to exit.
NOTE: If you are currently on a route guidance and you
select a Police Station the system will ask you to choose
Emergency — Police
one of the following:
To search for a Police Station close to your current
location, press “Emergency” from the Nav Main Menu • Cancel previous route
and then press the “Police Station” button.
• Add as first destination
• Add as last destination
NAVIGATION 247
You can press the “Back Arrow” button to return to the Press the desired Fire Department and press “Yes” to
confirm the destination.
previous screen or the “X” button to exit.
NOTE: If you are currently on a route guidance and you
To search for a Fire Department close to your current select a Fire Department the system will ask you to
location, press “Emergency” from the Nav Main Menu choose one of the following:
and then press the “Fire Department” button.
• Cancel previous route
Emergency — Fire Department
You can search for a Fire Department by the following • Add as first destination
categories, which are button tabs at the top of the screen.
• Add as last destination
• Name
You can press the “Back Arrow” button to return to the
• Distance
previous screen or the “X” button to exit.
• ABC (Search)
NOTE: In case of emergency, please contact the facility to
verify their availability before proceeding.
8
15UC65A-526-AA
First Edition
Uconnect® 6.5A/6.5AN
Chrysler Group LLC
Printed in the USA
Download PDF