OWNER’S MANUAL

Model: DMS-3PT-12V-4.5

(5302134-BLK)

5302134-BLU

(4.5 Cubic Ft., 3-Point

Dry Material Spreader)

Technical Specifications

 Hopper Capacity: 4.5 Cu. Ft.

 Spread Width: 5’ to 45’.

 12 Volt Motor w/Variable Speed Control (VSC)

 Stainless Steel 6-Blade Radial Fan

 Holds Up To 220 lbs. Potash or 200 lbs. Urea

Approved for:

♦ Fertilizer ♦ Seed ♦ Bait ♦ Pellets

♦ Ice Melting Pellets ♦ Granular Insecticides, Fungicides & Herbicides

Not Recommended for Rock Salt or Sand

IF YOU SHOULD HAVE A QUESTION OR EXPERIENCE A

PROBLEM WITH YOUR AG SPRAY PRODUCT GIVE US A CALL

BAKERSFIELD, CA

877-724-2236

FARGO, ND

701-280-2862

NEWTON, KS

800-394-7662

COLUMBUS, NE

800-274-1025

HOPKINSVILLE, KY

800-637-7172

PASCO, WA

800-634-2026

DOTHAN, AL

800-227-4098

MANKATO, MN

507-388-6295

TEMPE, AZ

877-974-7166

BEFORE YOU CALL, PLEASE HAVE THE FOLLOWING

INFORMATION AVAILABLE: SALES RECEIPT & MODEL

NUMBER. IN MOST CASES, AN AG SPRAY EMPLOYEE

CAN RESOLVE THE PROBLEM OVER THE PHONE

General Information

Thank you for purchasing this product. The purpose of this manual is to assist you in operating and maintaining your newly purchased product.

Warranty/Parts/Service

Retain a copy of your receipt for your unit, as it will be required to validate any warranty service

Products are warranted against manufacturer or workmanship defects for one year from date of purchase for home owner usage and 90 days for commercial usage.

Your authorized dealer is the best source of replacement parts and service, always remember to give the following information…



Correct Part Description and/or part number



Model #/Serial # of your unit

Part descriptions and numbers can be obtained from the illustrated parts list section(s) of this manual.

Whenever you need parts or service, contact your distributor/dealer first. For warranty work, always take your original sales slip or other evidence of purchase date, to your distributor/dealer.

Operating Safely

Read this owner’s manual before you assemble or operate the Dry Material Spreader.

Use eye, hand and breathing protection appropriate to the materials that you are spreading. Read the manufacturers or suppliers labels for proper protective equipment.

Read and follow the manufacturer’s instructions and notes for spreading and handling materials used for spreading.

Do not allow anyone to ride on or sit with you while operating the spreader.

Do not modify Dry Material Spreader or safety devices and guards.

www.agspray.com

[5005320 (10/18)]

Page 1

Assembly Instructions

 Remove all parts and hardware packages from the carton. Lay out all parts and hardware and identify using the illustrations later in this manual

 Any additional assembly of loose parts should be assembled onto the spreader per the exploded view drawing.

Installation

1. Attach the spread to your 3-point hitch and secure in place.

2. Use 12V motor controller (battery cable) clip to connect directly to the battery. Connect to the red clip (wire) to the positive (+) terminal first, then connect the black clip (wire) to the negative

(-) terminal.

3. Route 12V motor controller battery cable and 12V motor controller (motor cable) securely and carefully to prevent damage from moving parts and exhaust heat.

4. Turn the Motor Controller switch to the OFF position before connecting to motor cable.

5. Set the Motor Controller to the number “5” and switch the fan motor on. The fan should run at ½ speed. Rotate to number “10” for full fan speed and then rotate to number “1” for slowest fan speed.

This should be done without material in the hopper and the slide gate closed.

When disconnecting, make sure Motor Controller switch is OFF, disconnect the motor cable from the motor. Then disconnect the negative (black) connection and finally the positive (red) connection.

Operation

Replace or repair loose or missing components.

Operate controls and switches to make sure they respond correctly.

Conditions of weather and terrain must be considered when setting spreader. Do not spread on windy days, with light weight materials, such as grass seed. Protective clothing must be worn in some cases.

1. Determine vehicle speed:

If vehicle does not have a speedometer, determining speed can be accomplished by marking off 100, 200 or 300 feet.

The speed chart indicates the number of seconds it takes to travel the distances.

Using a watch or stop watch for time, travel into and out of the marked distance for a more accurate application speed.

See the recommended speeds/settings later in this manual.

SPEED (MPH) = Distance (Ft.) x 60/Time (seconds) x 88

Speed Chart

Time Required in seconds to travel a distance of

Speed in M.P.H.

(Miles Per Hour)

1.0

2.0

3.0

4.0

5.0

6.0

7.0

8.0

9.0

10.0

100 Ft.

68 sec.

34

23

17

14

11

9.7

8.5

7.6

6.8

200 Ft.

19

17

15

14

68

45

34

27

23

300 Ft.

29

26

23

20

102

68

51

41

34

2. Set Electronic Speed Control:

Adjust speed control to set the spread width. The highest fan speed will spread the widest pattern.

After adjusting the speed control to the desired width for the material you are using. Leave the dial on this setting and use the power switch to turn the fan on and off.

3.

Set Opening Gauge Control:

Refer to the settings chart for the proper settings.

Loosen wing nut and move gate slide gauge to the desired setting.

Tighten wing nut.

4. Adjust Pattern Adjust Ring Position to Center Spread

Pattern:

If the spread pattern is off-center, adjust by rotating the pattern adjusting ring. This adjustment is only require if the material density has dramatically changed.

Pattern adjust ring has been set at the factory for UREA.

CAUTION: Making adjustments with spinner running is unsafe. Never adjust pattern ring with spinner powered. Make sure motor controller switch is OFF and disconnect the motor cable from the motor before doing any pattern adjusting.

♦ Loosen worm gear clamp only enough to allow pattern adjust ring to be removed with slight force.

♦ Adjust pattern ring to re-center spread pattern:

If pattern is too heavy to the driver’s right, rotate the pattern adjust ring clockwise (as viewed from the top) until the pattern is even.

If pattern is too heavy to the driver’s left, rotate the pattern adjust ring counter-clockwise (as viewed from the top) until the pattern is even.

Retighten the worm gear clamp to a snug fit. DO NOT OVER-

TIGHTEN!

NOTE: To return the pattern adjust ring to the factory setting, simply align the pattern adjust ring to the center of the mounting plate, as pictured below (**).

See Note (**)

Pattern Adjustment Ring

Opening

Do not fill and transport over long distances. This will result in material packing and caking. Remove and clean all material at the end of your spreading day.

Cleaning/Storing

1. Remove and clean all material from the hopper.

2. Rinse inside and outside of hopper and dry before storing.

3. Motor and Motor Controller are NOT water resistant. Do Not submerge into water or use high pressure sprayers to clean.

4. The spreader should be stored in a dry area.

Page 2

Exploded View

DMS-3PT-12V-4.5

(5302134-BLK)

(5302134-BLU)

Refer to Parts List on Next Page for Part Numbers

See Detail A

See Detail B

Detail A Detail B

See next page for Spinner and

Motor Detail

Page 3

Spinner/Motor Detail

See Parts List Below for

Part Numbers

Spinner

Inside Hopper:

Spindle (Item 38) comes up through the base plate weldment. Washer (Item 40) is held down to base plate by Grommet

(Item 41), to keep material from falling out around spindle.

An agitation clip (pin), not included, is not necessary with this unit. If you find you need one with some materials, you can use a hairpin cotter pin through the hole in the spindle.

Parts List: DMS-3PT-12V-4.5

(5302134-BLK)

(5302134-BLU)

Page 4

38.385

Approximate Unit Dimensions:

25.167

32.356

28.603

An agitation clip (pin), not included, is not necessary with this unit. If you find you need one with some materials, you can use a hairpin cotter pin through the hole in the spindle.

Symptom

Spreader Motor

Does Not Run

Erratic Spread Pattern

Gate will not close or open

Gate will not stay open or closed

Troubleshooting Guide

Possible Cause

1. Loose or corroded connection

2. Speed Control Light is OFF

3. Loose battery connection

Action

1. Clean, check and reconnect

2. Check fuse. Replace if necessary

3. Adjust battery clamp contact

4. Broken spreader wiring

5. Over or Under voltage

6. Controller is not functioning

Spinner Shaft Set Screws Loose

Fertilizer around Slide Gate

4. Replace or repair damaged wiring

5. Power to harness connected to aux. circuit; Connect direct to battery

6. Bypass the controller, by connecting the wires together

Tighten Set Screws

Remove slide gate and clean after emptying hopper of material

1. Friction washer is lost or worn

2. Friction washer is in place

Replace friction washer

Bend slide gate arm up to tighten and down to loosen gate action.

Page 5

Settings & Charts

lbs/1000

Sq. Ft.

5-10

.80-1.49

2.5-5

.18-.28

.28-.46

2-3

4-5

.5-1

.11-.18

3-8

.18-.28

.46-.69

.22-.34

2-6

.46-.69

Grass

(3 MPH & 10' Spread Width) lbs/per

Acre

Gate

Setting

Materials

220-440 7.5-9.5

Bahia Grass

35-65 1-1.5

Bentgrass

110-220 3-7.5

Bermudagrass

8-12 .5

Big Bluestem

12-20 2 Bromegrass

85-130 3-4 Buffalograss

175-220 7-7.5

Carpetgrass

25-45 .75-2.5

Centipedegrass

5-8 .25

Chicory

125-200 4-9.5

Creeping Red Fescue

8-12 .5

Eastern Gamagrass

20-30 1 Festulolium

10-15

100-175

20-30

.5

3-8

1

Indiangrass

Kentucky Bluegrass-Lawn

Kentucky Bluegrass-Pasture

3.2

3.6

3.1

9.6

4.8

2.4

1.2

4

2

1

2

4

4.2

4.2

4

8

16 lbs/1000

Sq. Ft.

10

Turf Materials

(3 MPH & 20' Spread Width)

Gate

Materials

Setting

6.5

All America All Purpose Fertilizer 10-10-10

3

2.4

3

2

4

3

3

2

2.5

2

2

2

7

5

4

7

7

4.5

4

4

3.5

3

2.5

4

4

3.5

3.5

3.5

4

5.5

5.5

5.5

5

4

Bayer Season Long Grub Control

Bayer Season Long Grub Control

Bayer Complete Insect Killer

Bayer Complete Insect Killer

Bayer Power Force Multi-Insect Killer

Bayer Power Force Multi-Insect Killer

EC Grow Premier Turf Fertilizer 25.3-10

Eliminator Ant, Flea & Tick Killer Granules

Eliminator Ant, Flea & Tick Killer Granules

Eliminator Ant, Flea & Tick Killer Granules

Eliminator Fire Ant Killer Granules

Eliminator 5% Diazinon Killer Granules

Howard Johnsons All Purpose Fertilizer 8-8-8

Howard Johnsons All Purpose Fertilizer 10-10-10

Howard Johnsons All Purpose Fertilizer 12-12-12

Ironite 1-0-0

Klay Soft Pelletized Gypsum Soil Conditioner

3 3.5

Klay Soft Pelletized Gypsum Soil Conditioner

3

5

4.5

4

4

7

8.5

10

6.5

3.6

4

4

3.5

6

4

2.5

2

4.5

3.5

2.5

6.5

5

4

Klay Soft Pelletized Gypsum Soil Conditioner

Lesco Pre-M 0.86% Plus Fertilizer 25-0-7

Lesco Starter Fertilizer 18-24-12

Lesco Turf Fertilizer 24-2-11

Lesco Weed & Feed

Milorganite 6-2-0

Milorganite 6-2-0

Miracle-Gro Lawn Fertilizer Plus Weed Control

26-3-3

Miracle-Gro Starter Lawn Fertilizer 20-27-5

Miracle-Gro Starter Lawn Fertilizer 29-3-4

Ortho Lawn Insect Granules

Ortho Lawn Insect Granules

Ortho Lawn Insect Granules

Ortho Lawn Insect Granules

Ortho Max Insect Killer for Lawns

Ortho Max Insect Killer for Lawns

Ortho Max Insect Killer for Lawns

Parkers Super Soilite Lawn & Garden Fertilizer

10-10-10

Parkers Super Soilite Lawn & Garden Fertilizer

16-4-8

Pennington Lawn Starter Fertilizer 18-24-6

Page 6 lbs/1000

Sq. Ft.

3-8

.34-.46

.18-.28

.11-.18

.18-.28

.57-.69

.57-.69

5-8

.18-.28

.69-.80

.22-.28

.34-.46

5-8

1-2

Grass

(3 MPH & 10' Spread Width) lbs/per

Acre

Gate

Setting

Materials

125-300 4-9.5

Lawn Mixtures

15-20 .75

Orchardgrass

8-12 .5

Reed Canary Grass

5-8 .25

Red Fescue

8-12 .5

Red Top

25-30 2 Ryegrass-Annual

25-30 2 Ryegrass-Perennial

200-325 7.5-9.5

Ryegrass Fine Leaved Perennial

8-12 .5

Switchgrass

30-35 1 Sudan Grass

10-12 .5

Timothy-Grass

15-20 1.5

Tall Fescue

200-325 7.5-9.5

Turf Type Fescue-Lawn

45-85 2.5-3 Zoysia

3

3.2

6

3.6

2.3

3.1

2.3

1.4

2.7

10

12.3

8.1

6

5.4

3.6

5.9

2.7

3.1

2.7

2.9

4.7

3.3

4.6

2.33

2.25

3

3

3.6

2

3.6

3.5

3

3.2

3.2

3.2

3.6

3.2

3

3.5

4

6

4.5

3

4.5

4

3

4.5

7.5

8

6.5

6

5.5

4

5

4

3.5

4

4

4.5

4

5

4

4

4.5

2.5

4

3.5

5

4

3.5

5

4

4

4

4

2.5

lbs/1000

Sq. Ft.

Turf Materials

(3 MPH & 20' Spread Width)

Gate

Materials

Setting

2 3

Real-Kill Multi-Purpose Lawn & Garden

Insect Killer

2.5

3.5

Real-Kill Multi-Purpose Lawn & Garden

Insect Killer

Ringer Lawn Restore 10-2-6

Sam's Choice Crabgrass Preventer 30-3-4

Sam's Choice Crabgrass Preventer 30-3-4

Sam's Choice Crabgrass Preventer 30-3-4

Sam's Choice Crabgrass Preventer 30-3-4

Sam's Choice Insect Control Plus Fertilizer 28-4-6

Sam's Choice Lawn Food 29-3-4

Sam's Choice Starter Fertilizer 20-27-5

Sam's Choice Starter Fertilizer 20-27-5

Scotts Grubex

Scotts Grubex Season Long Grub Control

Scotts Grubex Season Long Grub Control

Scotts Lawn Fungus Control

Scotts Lawn Fungus Control

Scotts Starter Fertilizer 20-27-5

Scotts Starter Fertilizer 20-27-5

Scotts Turf Builder 28-3-8

Scotts Turf Builder Lawn Fertilizer 29-3-4

Scotts Turf Builder w/Summer Guard

Scotts Turf Builder Plus Weed Control

Scotts Winterizer 24-3-12

Scotts Winterizer 24-3-12

Sevin Lawn Insect Granules

Sevin Lawn Insect Granules

Sevin Lawn Insect Granules

Spectracide Grub Stop

Spectracide Triazicide Insect Killer Granules

Sta-Green Lawn Fertilizer 29-2-5

Sta-Green Lawn Weed Control

Sta-Green 200 Plus Weed & Feed 28-3-3

Sta-Green Starter Fertilizer 18-24-10

Sta-Green Weed & Feed 28-2-4

Vigoro Insect Control Plus Fertilizer

Vigoro Starter Fertilizer

Vigoro Turf Fertilizer 29-3-4

Vigoro Ultra Turf Winterizer 22-3-14

Vigoro Weed & Feed

Wal Mart Weed & Feed 28-3-3

lbs/1000

Sq. Ft.

.22-.34

.18-.22

.11-.18

.34-.46

.11-22

.34-.46

.18-.22

.57-1.5

Legumes

(3 MPH & 10' Spread Width) lbs/per

Acre

10-15

8-10

5-8

15-20

5-10

15-20

8-10

25-60

Gate

Setting

.5

.5

.25

.5

.25

.5

.5

.75-1.5

Materials

Alfalfa

Alsike Clover

Arrowleaf Clover

Berseem Clover

Birdsfoot Trefoil

Crimson Clover

Crown Vetch

Hairy Vetch

Settings & Charts

lbs/1000

Sq. Ft.

.11-.18

.05-.18

.22-.34

.18-.28

.34-.46

.22-.34

.11-.18

.11-.18

Legumes

(3 MPH & 10' Spread Width) lbs/per

Acre

5-8

2-8

10-15

8-12

15-20

10-15

5-8

5-8

Gate

Setting

.25

.25

.5

.5

.5

.5

.25

.25

Materials

Kura Clover

Ladino Clover

Medium Red Clover

Mammoth Red Clover

Rose Clover

Sweet Clover

White Clover

Yellow Blossom Sweet Clover

Grains & Forages

(3 MPH & 10' Spread Width) lbs/1000

Sq. Ft.

1.65-2.2

1.25-2

1.5-2

1.5-2

1.5-2.2

lbs/per

Acre

72-96

56-84

60-90

60-90

64-96

Gate

Setting

1.5-3

5.0-6.0

5.5-6.0

5.5-6.0

5.5-6.0

Materials

Barley

Fall/Winter Cereal Rye Grain

Hard Red Spring Wheat

Hard Red Winter Wheat

Oats - Nurse Crop

Grains & Forages

(3 MPH & 10' Spread Width) lbs/1000

Sq. Ft.

lbs/per

Acre

1.5-2.75

64-128

.46-.69

20-30

.34-.69

15-30

.05-.18

.14-.18

2-8

6-8

Gate

Setting

5.5-6.0

1

.75-1

.25

.25

Materials

Oats - Grain

Pearl Millet

Sorghum

Rape

Rape-Dwarf Essex

Dial Setting

3

4

1

2

5

6

7

8

9

10

Spread

Width (Feet)

5

7.5

12

20

25

30

35

40

45

50

Ounces/Square Yard

2

2 to 4

2 to 4

2 to 4

2 to 4

1/4 to 1

2 to 4

2 to 4

2 to 4

2 to 4

1/4

8

8

Ice Melt (3 MPH & 5' Spread Width)

lbs./1000

Sq. Ft.

15-30

Gate

Setting

4.5

Materials

Freez Gard

15-30

15-30

15-30

15-30

2-8

20-40

20-40

20-40

20-40

2-1/2

80

80

4 to 5.5

4.5 to 5.5

Peladow

Dead Sea Works Ice Melting De-Icer

4.5 to 5.5

MAG Ice Melting Pellets

4.5 to 5.5

Ice No Mor

2 to 3.5

Professional Ice Melter

4 to 6.5

4 to 6

Professional Ice Melter

EC Grow Lightning Fast

3.5 to 5.5

Thaw Master

4 to 6

2

10

9

Kansas Medium Rock Salt

Snowplow

Snowplow

Safe Step

Do Not Use any kind of agitation clip with Ice Melt products when using speed dial setting at less than 4

♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦

If your rate is different than what shows on the charts, you will need to adjust the gate setting accordingly.

It would be suggested to mark off 1000 sq. ft. and spread, checking your spread pattern and rate before spreading your field.

If the material you’re spreading is not in one of these charts, match it to the closest material in the charts and check your spread pattern and rate. If needed, you will adjust from those settings.

♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦

Ag Spray assumes no liability pertaining to seed rates claimed with this spreader. Rates listed on chart are generic for the U.S.A. and should be used as a starting point or guide only. Check with your local extension office or state for official application rates. Seed rate chart gate settings were calibrated through in house testing with spreader. Use lower rates on more productive soils. Seed rates, gate settings, and information listed is subject to change without notice.

IMPORTANT!! To prevent spreading miscalculations, make field checks to be sure you are spreading at the desired rate.

Page 7

lbs./1000 Sq. Ft.

Flow Control Setting

Operation

Instructions

0.6

1

0.7

0.8

2 2.5

This is information off the sticker on the hopper.

1

3

1.5

3.5

2

4

3.5

4.5

4.5

6.0

7.5

5 5.5

6

9.0

10.0

11.0

13.0

15.0

17.0

6.5

7 7.5

8 9 10

* USE APPLICATION INFORMATION ON BAG, FIND CALIBRATION SETTING (ABOVE) AND SET GATE STOP TO CORRECT FLOW

SETTING

* IF SPREAD PATTERN IS OFF CENTER ADJUST PATTERN RING POSITION, SEE OWNER'S MANUAL

* NOTE: ABOVE CALIBRATION SETTINGS HAVE BEEN DETERMINED USING UREA 46-0-0, 20 FOOT SWATH & 3 MPH

(TRAVEL 88 FT. IN 20 SECONDS)

* NOTE: CALIBRATION GUIDE SETTINGS IS TO BE USED AS A GENERIC GUIDE. FOR SPECIFIC PRODUCTS, SEE YOUR

OWNER'S MANUAL

Instrucciones

De Operacion

* USE LA INFORMACIÓN SOBRE APLICACIÓN EN LA BOLSA, BUSQUE LA POSICIÓN LA CALIBRACIÓN (ARRIBA) Y FIJE LA

PARADA DE LA PUERTA PARA CORREGIR LA CALIBRACIÓN DE LA CORRIENTE.

* SI PAUTA de EXTENSIÓN ES DE el CENTRO AJUSTA POSICIÓN de ANILLO de PAUTA VE MANUAL.

* NOTA: ENCIMA DE CALIBRACIÓN AJUSTES HA SIDO DETERMINADO UTILIZAR 46-0-0 de UREA, 20 de RINGLERA de PIE,

Y 3 MPH (VIAJA 88 P EN 20 SEGUNDOS).

* NOTA: AJUSTES de GUÍA de CALIBRACIÓN SON de SER UTILIZADOS COMO UNA GUÍA GENÉRICA. PARA PRODUCTOS

ESPECÍFICOS, VEA SU MANUAL.

Warranty

LIMITED WARRANTY FOR NEW AG SPRAY EQUIPMENT

WHO MAY USE THIS LIMITED WARRANTY. This limited warranty (the “Limited Warranty”) is provided by Ag Spray Equipment to the original purchaser (“you”) of the Equipment (as defined below) from Ag Spray Equipment or one of Ag Spray Equipment’s authorized dealers. This Limited

Warranty does not apply to any subsequent owner or other transferee of the Equipment. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL

RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

WHAT THIS LIMITED WARRANTY COVERS AND FOR HOW LONG. Ag Spray Equipment warrants that any new Equipment will be free from defects in material and workmanship for a period of one (1) year (homeowner), 90 days (commercial user), after delivery of the Equipment to you (the

“Warranty Period”). The Warranty Period is not extended if Ag Spray Equipment repairs or replaces the Equipment.

WHAT IS NOT COVERED BY THIS LIMITED WARRANTY. This Limited Warranty does not apply to: (1) used Equipment; (2) any Equipment that has been altered, changed, repaired or treated since its delivery to you, other than by Ag Spray Equipment or its authorized dealers; (3) damage or depreciation due to normal wear and tear; (4) defects or damage due to failure to follow Ag Spray Equipment’s operator’s manual, specifications or other written instructions, or improper storage, operation, maintenance, application or installation of parts; (5) defects or damage due to misuse, accident or neglect, “acts of God” or other events beyond Ag Spray Equipment’s reasonable control; (6) accessories, attachments, tools or parts that were not manufactured by Ag Spray Equipment, whether or not sold or operated with the Equipment; or (7) rubber parts, such as tires, hoses and grommets.

HOW TO OBTAIN WARRANTY SERVICE. To obtain warranty service under this Limited Warranty, you must (1) provide written notice to Ag Spray

Equipment of the defect during the Warranty Period and within thirty (30) days after the defect becomes apparent or the repair becomes necessary, at the following address: Ag Spray Equipment, 1000 Fimco Lane, North Sioux City, SD 57049; and (2) make the Equipment available to

Ag Spray Equipment or an authorized dealer within a reasonable period of time. For more information about this Limited Warranty, please call: 800-274-1025 or your local Ag Spray location.

WHAT REMEDIES ARE AVAILABLE UNDER THIS LIMITED WARRANTY. If the conditions set forth above are fulfilled and the Equipment or any part thereof is found to be defective, Ag Spray Equipment shall, at its own cost, and at its option, either repair or replace the defective Equipment or part. Ag Spray Equipment will pay for shipping and handling fees to return the repaired or replacement Equipment or part to you.

LIMITATION OF IMPLIED WARRANTIES AND OTHER REMEDIES. THE REMEDIES DESCRIBED ABOVE ARE YOUR SOLE AND EXCLUSIVE REMEDIES,

AND AG SPRAY EQUIPMENT’S SOLE LIABILITY, FOR ANY BREACH OF THIS LIMITED WARRANTY. TO THE EXTENT APPLICABLE, ANY IMPLIED WAR-

RANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,

SHALL BE LIMITED IN DURATION TO THE WARRANTY PERIOD, AND THE REMEDIES AVAILABLE FOR BREACH THEREOF SHALL BE LIMITED TO THE

REMEDIES AVAILABLE UNDER THIS EXPRESS LIMITED WARRANTY. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WAR-

RANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. IN NO EVENT SHALL AG SPRAY EQUIPMENT’S LIABILITY UNDER THIS LIMITED

WARRANTY EXCEED THE ACTUAL AMOUNT PAID BY YOU FOR THE DEFECTIVE EQUIPMENT, NOR SHALL AG SPRAY EQUIPMENT BE LIABLE, UNDER

ANY CIRCUMSTANCES, FOR ANY CONSEQUENTIAL, INCIDENTAL, SPECIAL OR PUNITIVE DAMAGES OR LOSSES, WHETHER DIRECT OR INDIRECT.

SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR

EXCLUSION MAY NOT APPLY TO YOU.

Page 8