User’s Manual
BRONCO THE RC TRICERATOPS ™
© 2014 VTech
Printed in China
91-002928-006 US
Hi Friend,
You’re about to embark on a “dino-mite” adventure with me,
Bronco the RC Triceratops™! Just so you know, I’ve been
specially created just for you and a part of the VTech® Switch
& Go Dinos® Turbo crew! Switch & Go Dinos® are a special
breed of dinosaurs that transform from vehicle to dino in
a few easy steps. You’re going to love playing with me!
Not only can you transform me with the push of a button,
but you can help me do other cool things, too! Try using
the directional buttons on my remote control and you can
control my every move. Help speed up my movement by
cranking my turbo charge lever and pressing my turbo
boost button! Customize me by choosing my eyes in dino
mode or picking a driver when I’m in vehicle mode! Press
other buttons and you’ll hear me make awesome sounds,
hear me talk and tell you about my wild life as a dinosaur!
Maybe you’ll even learn a thing or two.
For more fun, be sure to check out the rest of the Switch
& Go Dinos® crew (each sold separately)! And remember,
with me you’re in for some dino switchin’, turbo chargin’ fun!
Your pal,
Bronco the RC Triceratops™
INTRODUCTION
Hey, dude! I’m Bronco the RC Triceratops™. Use my remote control
to transform me and make me race. Hit the turbo boost, and I’ll take
off! Let’s go!
Off/Channel
Switch
Transformation
Button
Style Button
Volume Button
Steering Wheel
Talk Button
Sound Button
Introduction
Turbo Charge
Lever
Turbo Boost
Button with LED
Forward/
Backward Button
Light
Button
Remote Control
Power Indicator
2
LCD Screen
Alignment
Adjust
Off/Channel
Switch
INCLUDED IN THIS PACKAGE
• One VTech® SWITCH & GO DINOS® TURBO: Bronco the RC
Triceratops™
• One remote control
• One user’s manual
• One label sheet
WARNING: All packing materials, such as tape, plastic sheets,
packaging locks and tags are not part of this toy, and
should be discarded for your child’s safety.
ATTENTION: Pour la sécurité de votre enfant, débarrassez-vous de
tous les produits d’emballage tels que rubans adhésifs,
feuilles de plastique, attaches et étiquettes. Ils ne font
pas partie du jouet.
NOTE:
1. Please keep the user’s manual as it contains important information.
2. For optimal performance, please use the remote controlled device
on a flat smooth surface.
Introduction
LED Headlights
3
GETTING STARTED
1. Make sure the unit and remote control are turned OFF.
2. Locate the battery cover on the bottom of the unit and remote control.
Use a screwdriver to loosen the screw.
3. First, install 6 new “AA” size (LR6/AM-3) batteries following the
diagram inside the battery box in the main unit. Then, install 2 new
“AA” size (LR6/AM-3) batteries following the diagram inside the
battery box in the remote control. (The use of new alkaline batteries
is recommended for maximum performance.)
4. Replace the battery cover and tighten the screw in the main unit and
remote control to secure it.
Bronco the RC Triceratops™
Getting Started
BATTERY INSTALLATION
Remote Control
Note: When the battery runs low, the toy will no longer respond. If this
happens, please replace the battery.
4
BATTERY NOTICE
• Use new alkaline batteries for maximum performance.
• Use only batteries of the same or equivalent type as recommended.
• Do not mix different types of batteries: alkaline, standard (carbonzinc) or rechargeable (Ni-Cd, Ni-MH), or new and used batteries.
• Do not use damaged batteries.
• Insert batteries with the correct polarity.
• Do not short-circuit the battery terminals.
• Remove batteries during long periods of non-use.
• Do not dispose of batteries in fire.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging (if
removable).
• Rechargeable batteries are only to be charged under adult
supervision.
Battery Notice
• Remove exhausted batteries from the toy.
5
LABEL INSTRUCTIONS
5
6
3
4
7
1
1
5
6
3
4
2
8
2
8
2
8
Style 2
7
2
1
5
6
3
4
Label Instructions
Style 1
Style 3
7
1
3
6
Please choose from one of the three label designs to decorate Bronco
the RC Triceratops™. Attach the chosen group of labels to the location
on the product that matches the number next to the label.
5
7
6
1
4
2
Label Instructions
8
3
Note: It is possible for the front bumper and side panel to get separated
if the unit runs into something with enough force. If this happens,
please reconnect the front bumper and side panel as shown below.
7
PRODUCT FEATURES
Slide the Remote Control Off/Channel Switch to the
I or II position to turn the Remote Control ON.
Slide the Off/Channel Switch on Bronco the RC
Triceratops™ to the same I or II position as the
Remote Control. The Remote Control and Bronco
the RC Triceratops™ must be on the same I or II
channel to send and receive signals.
Note: I and II settings are two different channels the Remote Control
and Bronco the RC Triceratops™ can operate on. If two units
are operating in the same vicinity, put one unit on channel I
and the other on channel II.
2. REMOTE CONTROL POWER INDICATOR
After the Remote Control is turned ON, the
Remote Control Power Indicator will flash to
show the remote is ON. The indicator light will
illuminate anytime a button is pressed, lever is
pulled or the Steering Wheel is turned. The light
indicates a signal is being sent to Bronco the
RC Triceratops™.
Product Features
1. TURN THE UNIT ON
3. TRANSFORMATION BUTTON
Press the Transformation Button to remotely
transform Bronco the RC Triceratops™ from
dino to vehicle or from vehicle to dino.
8
4. TURBO CHARGE LEVER
Move the Turbo Charge Lever up and down
to charge Bronco the RC Triceratops’ turbo
boosters. When Bronco is fully charged, he
says, “charge complete.”
If Bronco the RC Triceratops™ has been
charged to a level in which he has turbo boost
power, the Turbo Boost Button with LED
will blink. The faster the Turbo Boost Button
with LED is blinking, the more time that will be
allotted for the turbo boost. Once the Turbo
Boost Button with LED is pressed, Bronco
the RC Triceratops™ will move at an increased
speed.
Note: A turbo boost will last for the duration of the charge level
earned. If the full turbo boost hasn’t been used while traveling
in a certain direction, you can change direction or transform
Bronco and retain the remaining turbo boost available.
Product Features
5. TURBO BOOST BUTTON with LED
6. FORWARD/BACKWARD MOVEMENT
By pressing the Forward/Backward Button up/
down, Bronco the RC Triceratops™ will move
forward/backward.
Note: If you find Bronco the RC Triceratops™ is not
moving straight, you can use the Alignment Adjust
to improve.
9
7. STEERING WHEEL
When Bronco the RC Triceratops™ is moving
forward/backward, turn the Steering Wheel to
make him turn left/right.
8. LIGHT BUTTON
Press the Light Button to see the two headlights
illuminate and hear fun sounds and phrases.
9. TALK BUTTON
Press the Talk Button to hear the dino or driver
talk.
10.SOUND BUTTON
Press the Sound Button to hear cool sound
effects.
Product Features
11.STYLE BUTTON
Press the Style Button to change the dino eyes
or choose a driver.
12.VOLUME BUTTON
Press the Volume Button to adjust the volume.
10
Slide the Off/Channel Switch on the Remote Control
to OFF to turn it OFF.
Slide the Off/Channel Switch on Bronco the RC
Triceratops™ to OFF to turn it OFF.
To preserve battery life, Bronco the RC Triceratops™ and the
Remote Control will automatically power-off after several minutes
without input.
Note: If Bronco the RC Triceratops™ automatically turns off, turn
the unit off and slide the Off/Channel Switch back to the I or
II position used prior to turn it back on.
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat
source.
3. Remove the batteries when the unit is not in use for an extended
period of time.
4. Do not drop the unit on hard surfaces and do not expose the unit to
moisture or water.
TROUBLESHOOTING
If for some reason the unit stops working or malfunctions, please follow
these steps:
Care & Maintenance / Troubleshooting
13.TURN THE UNIT OFF/ AUTOMATIC SHUT-OFF
1. Please turn the unit OFF.
2. Interrupt the power supply by removing the battery.
3. Let the unit stand for a few minutes, then replace the battery.
4. Turn the unit ON. The unit should now be ready to play again.
5. If the product still does not work, replace with a new battery.
11
If the problem persists, please call our Consumer Services Department
at 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada, and a
service representative will be happy to help you.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help
Caution: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
Note
NOTE:
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC
RULES OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING INTERFERENCE
THAT MAY CAUSE UNDESIRED OPERATION.
CAN ICES-3 (B)/NMB-3(B)
12
Note
THIS DEVICE COMPLIES WITH INDUSTRY CANADA LICENCEEXEMPT RSS STANDARD(S). OPERATION IS SUBJECT TO
THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY
NOT CAUSE INTERFERENCE, AND (2) THIS DEVICE MUST
ACCEPT ANY INTERFERENCE, INCLUDING INTERFERENCE
THAT MAY CAUSE UNDESIRED OPERATION OF THE DEVICE.
LE PRÉSENT APPAREIL EST CONFORME AUX CNR
D’INDUSTRIE CANADA APPLICABLES AUX APPAREILS RADIO
EXEMPTS DE LICENCE. L’EXPLOITATION EST AUTORISÉE
AUX DEUX CONDITIONS SUIVANTES : (1) L’APPAREIL NE
DOIT PAS PRODUIRE DE BROUILLAGE, ET (2) L’UTILISATEUR
DE L’APPAREIL DOIT ACCEPTER TOUT BROUILLAGE
RADIOÉLECTRIQUE SUBI, MÊME SI LE BROUILLAGE EST
SUSCEPTIBLE D’EN COMPROMETTRE LE FONCTIONNEMENT.
13
Download PDF