09 - Ziegler S doo
32663-u009-001
21.04.2005
11:25 Uhr
Seite 1
Environmental
protection
09
32663-k009-002
21.04.2005
10:55 Uhr
Seite 2
CHEMICAL PROTECTIVE SUITS
The suit is in conformity with the specifications of VFDB, rule 0801, and
consists of:
- TeamMaster pro basic suit, size XL
for body size 180 up to 200 cm
- Safety boots size 46, DIN 4843-10
- Viton gloves, size 11
- PVC over-gloves
- Cotton gloves
- Backpack padding
Colour: Blue
Weight: 8 kg
...................................................58728
58728
DRÄGER chemical protective suit
”TeamMaster pro”
09
Chemical protective suit, one part, for
protection against solid, liquid and
gaseous chemicals. Besides an
extremely high resistance to chemicals, another remarkable feature of
TeamMaster pro is its ruggedness
against mechanical influences.
Due to the new material HIMEX Dräger
has set new standards in combining
mechanical and chemical characteristics:
- High resistance to flarebacks
- Exceptional resistance to chemicals,
also at low temperatures and in
handling cold media
- Easy change of gloves and safety
boots. The chemical tightness is
maintained
- Breathing apparatus and helmet are
worn under the suit
- Practical inside pocket for a walkie
talkie, etc.
- Exchangeable backpack padding
- The newly designed, very strong
Seallex seam is also extremely
gastight
- The zipper with an inside metal chain
and a Viton-coating on the outside is
highly gastight
- Large panorama visor for optimum
sight.
2
Chemical protective suit ”Reflector”,
VFDB 0801, appendix A
A protective suit for limited use only. It
is the first suit where a comprehensive resistance to chemicals is
combined with a reflecting, antistatic
flareback protection of up to
1093ºC/8 sec. The suit is gastight,
with gastight zipper (Viton) with double
zipper cover, velcro fastener and footlets with spray-arresting cuffs. All
seams are resistant to chemicals on
both sides as well as gastight through
heat sealing. The suit is made of a
heavy-duty high-tech material. Tested
according to ASTM F 1001 test series
on penetration of chemicals and
according to NFPA 1991 on flame
impact (burning test) and according to
heat insulation standards (TPP) on skin
protection. Due to a special zipper
design, the extra wide back as well as
the quick-disconnect belt it is easy to
put on and take off, even with compressed-air breathing apparatus.
Good mobility and sufficient flexibility.
The large visor made of FEP-teflon/PVC
provides excellent view. The inside
gloves are made of butyl. The PBIKevlar® over-gloves are easy to exchange due to a quick-change system.
Colour: Silver
Sizes: M, L, XL, XXL
(Size XXL 10% surcharge)
Protective shoes, size 49, complying
with VFDB rule, appendix A, are
included.
Weight: 6 kg
.....................................................9572
Some articles may not be available in
specific countries. Details on request.
9572
Chemical protective suit
”Responder”, VFDB 0801,
appendix A
Gastight, with gastight zipper (Viton)
with double zipper cover, velcro
fastener and footlets with sprayarresting cuffs. All seams are resistant
to chemicals on both sides as well as
gastight through heat sealing. Due to
Kappler’s patented chemical protective material Responder this suit
provides comprehensive protection.
Tested according to ASTM F 1001
series on more than 200 chemicals
and gases. The special zipper design,
the extra wide back as well as the
quick-disconnect belt make the suit
easy to put on and take off even with
compressed air breathing apparatus.
Good mobility and sufficient flexibility
also in low temperatures (tested up to
-40ºC). The large visor made of FEPteflon/PVC provides excellent view.
The inside gloves are made of butyl.
The PVC over-gloves are easy to
exchange due to a quick-change
system.
Sizes: M, L, XL, XXL
(Size XXL 10% surcharge)
Protective shoes, size 49, complying
with VFDB rule, appendix A, are
included .
Weight: 3.4 kg
(Illustration on page 3)
.....................................................9571
For orders please contact our local
agent.
32663-k009-003
21.04.2005
10:56 Uhr
Seite 3
CHEMICAL PROTECTIVE SUITS WITH
ACCESSORIES
59159
9571
63926
DRÄGER Porta Control
Test box for testing of chemical
protective suits. The valves as well as
the complete suit can be checked for
tightness. In the Dräger Porta Control
all adapters for testing a Dräger suit
worn over a compressed air breathing
apparatus are found.
Dim. (LxWxH): 420x330x110 mm
Weight: 3.8 kg
...................................................59159
9566
Light chemical protective suit*
DIN 32762, style A, ”ISOTEMP-AcidStop”, one piece 4007, material PVC.
With large hood with velcro fastener,
sleeve cuffs with elastics, front zipper
with trimming and velcro fastener, wide
trouser legs with velcro strap for tight
fitting. All seams are sealed (liquidproof).
Size: XL
Weight: 1.8 kg
...................................................57276
Kleenguard-Overall*
Kimberly-Clark. Made of specially
treated material, for protection against
splashes and spray of organic and
water-soluble chemicals. For use with
less toxic chemicals. Spacious cut in
T-design for maximum mobility.
Tested according to EN 368, antistatic
test according to prEN 1149.
Design: Overall without shoulder
seams, blue, without hood, with two
pockets, elastic waistband, nylon
zipper with overlapping trimming.
Sizes: M, L, XL, XXL
(Size XXL 10% surcharge)
.....................................................9565
Jump suit, navy blue*
Made of 93% cotton and 7% polyamide. The jacket with zipper can be
worn as a roll-neck. Trousers with a
zipper pocket, leg bottoms with cuff.
Sizes: S, M, L, XL, XXL
.....................................................9482
DRÄGER chemical protective suit
710 PVC
This suit is ideal for work with acids
and alkalis of low concentrations.
Due to the long gastight front zipper
the suit is quickly put on and taken off.
Colour: White
Size:
XL for body sizes
of 180-200 cm
Weight: 6 kg
...................................................63926
Transport bag*
Made of tearproof, coated nylon fabric,
for chemical protective suits
TeamMaster pro and 710 PVC
...................................................63929
* = not illustrated
Woollen socks*
Three pairs, assorted, 2 pairs grey,
1 pair blue, long type
.....................................................9499
Light chemical protective suit
Made of Kappler-CPF-2 (131 g/m2).
Colour: Grey. Overall with hood.
Hood with elastics around the face,
sleeves and legs. Nylon zipper down
to the crotch with overlapping
trimming and double velcro strip for
perfect tightness.
Sizes: M, L, XL, XXL
(Size XXL 10% surcharge)
.....................................................9566
Some articles may not be available in
specific countries. Details on request.
Gym shoes*
Made of cloth, with profile sole.
Sizes: 36-46
.....................................................9472
3
09
32663-k009-004
21.04.2005
10:57 Uhr
Seite 4
DECONTAMINATION
STAINLESS STEEL FITTINGS
56338
88155
63880
63882
09
”SE-Shower”
(Quickly erected decontamination
shower) without compressed air
cylinder. This shower is mainly used
for mobile decontamination of chemical protective suits. The shower cabin
made of PVC coated polyamide fabric
is fixed with cords to an inflated hose
frame, so that it can be removed, if
required. The shower frame is inflated
by means of a compressed air cylinder
or bellows. In the shower cabin there
are three shower nozzles; water supply
by means of a hose line. Ready for use
within less than 20 seconds, one
operator only.
Erection area: 3x3 m
Packing dim. (LxWxH):
900x550x400 mm
Dim. erected (LxWxH):
1930x1340x2450 mm
Weight: 28 kg (without compressed air
cylinder)
...................................................56338
Decontamination apparatus
for safe and quick treatment of the skin
in contact with phenols, cresols and
xylenols. Pressure tank 30 bar with 10 l
of polyethylenglycol 300 and ethanol,
ratio 2 : 1.
Chemical resistant high pressure hose
with nozzle and shut-off valve. Outside
propellant cylinder CO2.
Dim. (HxWxD): 585x305x215 mm
Weight: 17.6 kg
...................................................88155
Stationary decontamination and
drying units, please see chapter 6
”Equipment for fire stations”.
4
63881
OCULAV - combined eye rinsing and
squirting bottle
for immediate and highly effective
rinsing of the eyes. Provided with air
valve and two exchangeable caps, i.e.
the boat-shaped cap for rinsing the
eyes in case of slight causticizations
and the tubular yellow cap for squirting
out the eyes as well as for removal of
impurities after heavy injuries.
Contents: 820 ml
...................................................63882
Eye rinsing solution
Packed in sterile bags.
Contents: 250 ml
...................................................63881
Water can 20 l
Marked, with valve and hose. When
put in a suitable place immediately
ready for rinsing of eyes and face
...................................................63880
The threaded connections are sealed
against leakages by means of an oil
and acid proof liquid plastic material.
Coupling sealings are made of FKM
(Viton, black) according to ASTM-D
1418-76 and thread sealings are made
of PFTE (teflon, white). They are
suitable for suction as well as for
delivery.
41070
44030
44042
The chemical resistant armatures
listed below are in conformity with
equipment plan, DIN 14555-12-1314. Other armatures and coupling
systems are offered on request.
Pair of couplings, stainless steel,
DN 50
for chemical resistant hoses, with
2 grounding screws, sealings of Viton,
consisting of threaded connection and
cone-type connection with nut.
Weight: 1.5 kg
...................................................41070
Chemical resistant armatures
Acid proof hoses, pumps, fittings,
tanks etc. are provided with hose
connections of dimensions acc. to
DIN 11854 (also called acid couplings).
Inlet with cone-type connection SD,
DIN 11851, with mobile but
captive nut F, DIN 11854. Outlet with
threaded connection SC, DIN 11851.
Basically stainless steel, material
no. 1.4571, DIN 17440, is used for
armatures. For castings material
no. 1.4408, DIN 17445, is preferred.
Deviations due to technical reasons
are stated.
If possible, the parts are professionally
welded into one unit and the welding
seams are pickled.
Pair of couplings, stainless steel,
DN 50*
for fitting to chemical resistant hoses
by means of screwed clamp connections, consisting of cone-type connection with nut and threaded connection.
Weight: 1.5 kg
...................................................41073
Some articles may not be available in
specific countries. Details on request.
* = not illustrated
Clamp connections*
for couplings of stainless steel
DN 50, art.no. 41073
...................................................41075
32663-k009-005
21.04.2005
10:57 Uhr
Seite 5
STAINLESS STEEL ARMATURES
SEALINGS
Three-way valve DN 50
Stainless steel. Passage with conetype connection with nut and threaded
connection, branch with threaded
connection and with blank cap and
chain.
Weight: 4.8 kg
...................................................44030
Ball valve DN 50
Stainless steel. With cone-type
connection with nut and threaded
connection.
Weight: 2.5 kg
...................................................44042
44044
44043
Elbow 90º DN 50
Stainless steel. With cone-type
connection with nut and threaded
connection.
Length: 350 mm
Weight: 0.6 kg
...................................................44044
Drain pipe DN 50
Stainless steel. Bend 45º, with conetype connection with nut. Accessory to
ball valve.
Length: 300 mm
Weight: 0.6 kg
...................................................44043
Elbow 45º DN 50*
Stainless steel. With cone-type
connection with nut and threaded
connection.
Length: 350 mm
Weight: 0.6 kg
...................................................44052
42022
44014
44035
44013
42308
44046
44045
44034
Suction pipe DN 32
Stainless steel. For removing of residual liquids, with hand protection, with
threaded connection at the top end
and with a bend of 45º and foot valve
with ball of NBR (perbunan) at the
lower end, ground sieve with a hole of
4 mm Ø.
Length: 1000 mm
Weight: 5 kg
...................................................44045
Suction strainer DN 50
Stainless steel. Inlet opening at least
65 mm Ø, valve ball of NBR
(perbunan), with threaded connection.
Weight: 2.5 kg
...................................................42308
Safety drain pipe DN 50
Stainless steel. With hand protection.
Elbow of 90º at the top end with conetype connection with nut, divider sieve
DN 65 with screw-off bearing plate at
the bottom end. For laminar draining of
inflammable liquids.
Length: 1000 mm
Weight: 5 kg
...................................................44046
Adapter Storz C 52
Cone-type connection with nut
Stainless steel, DN 50.
Weight: 1.5 kg
...................................................42022
Adapter Storz C 52
Threaded connection
Stainless steel, DN 50.
Weight: 1.2 kg
...................................................42023
Connection piece DN 50
Stainless steel. Both sides with
cone-type connection with nut.
Weight: 1 kg
...................................................44034
* = not illustrated
42023
Some articles may not be available in
specific countries. Details on request.
Connection piece DN 50
Stainless steel. Both sides with
threaded connection.
Weight: 0.9 kg
...................................................44035
Set of spare FKM sealings*
Consisting of 10 sealings for acid
couplings DN 50, 6 size C Storz
suction sealings. Packed in a bag.
Weight: 0.2 kg
...................................................44024
Adapter
One side with 2” female thread with
PTFE sealing, the other side with
threaded connection DN 50 with FKM
sealing.
Weight: 0.6 kg
...................................................44013
Adapter
One side with 2” female thread with
PTFE sealing, the other side with
cone-type connection DN 50 with nut.
Weight: 0.9 kg
...................................................44014
Set of flanged adapters for
industries*
Stainless steel. One adapter each with
flange DN 40, 50, 80 and 100, DIN
2527 ND 6, with packing grooves on
one side. The other side with threaded
connection DN 50 with FKM sealing.
Weight: 10.6 kg
...................................................44007
Set of flange sealings ND 6*
Soft PVC, 3 mm strong, consisting of
8 sealings each of size DN 40, 50, 80
and 100, DIN 2690 ND 6,
for adapters, art.no. 44007.
Weight: 2 kg
...................................................44012
5
09
32663-k009-006
21.04.2005
10:58 Uhr
Seite 6
STAINLESS STEEL ARMATURES
COUPLING WRENCHES
SEALINGS
44019
63919
44915
Set of tank truck flanges
Stainless steel, 1.4571. One piece
each with flange DN 80 and DN 100,
DIN 28461 ND 10, with sealing
grooves. The other side with threaded
connection DN 50 with FKM sealing.
Weight: 5 kg
...................................................44019
Set of tank truck flanges ND 10*
Soft PVC, 3 mm strong, consisting of
8 sealings each of size DN 80 and
DN 100, DIN 28463 DN 10, for tank
truck adapters, art.no. 44019.
Weight: 2.5 kg
...................................................44018
09
Set of hexagon head cap screws*
(20 pcs.). Stainless steel, M 16x60,
DIN 933, nuts DIN 934 and washers
DIN 125, for flange connections
DN 16, 32 and 100.
Weight: 3.5 kg
...................................................44015
Set of hexagon head cap screws*
(20 pcs.). Stainless steel, M 12x50,
DIN 933, nuts DIN 934 and washers
DIN 125, for flange connections
DN 16, 20, 25 and tank truck flanges
DN 100 - 125.
Weight: 2.6 kg
...................................................44016
Set of hexagon head cap screws*
(20 pcs.). Stainless steel, M 10x60,
DIN 933, nuts DIN 934 and washers
DIN 125, for tank truck flanges
DN 50 and 80.
Weight: 2.1 kg
...................................................44017
6
44048
63903
Universal barrel wrench
Non-sparking, made of special bronze
alloy, for 22 different barrel plugs.
Length: 400 mm
Weight: 2.5 kg
...................................................63919
Hook wrench DIN 1810
Stainless steel, for acid couplings.
Weight: 0.5 kg
...................................................63903
Coupling wrench B/C
Made of a non-sparking alloy, for Storz
couplings.
Weight: 0.45 kg
...................................................44915
Universal sealing and draining
coupling ”Öko-Protector”*
Couplings as well as burst pipes can
be sealed or provided with emergency
drain couplings by means of the ”ÖkoProtector”. With the standard kit pipes
with a diameter from 40 mm up to
100 mm and flanges DN 40 up to
DN 100, with dimensions acc. to
DIN 2527 and 2846, can be sealed.
The standard kit includes: 2 flanges
with DN 50 drain connection, a selfarresting supporting ring, a universal
clamping device.
Dim. (LxWxH): 520x420x200 mm
Weight: 10 kg
...................................................44057
Unika tank wagon drain coupling*
Elbow and threaded connection DN 50
of stainless steel, clamping device of
light metal casting, sealing of FKM
(Viton).
Weight: 8.5 kg
...................................................44047
Some articles may not be available in
specific countries. Details on request.
44040
Unika tank wagon drain coupling
Completely of stainless steel, with
threaded connection DN 50.
Weight: 8.5 kg
...................................................44048
Tank wagon adapter KWZ 5 1/2”
Stainless steel (for draining off from rail
tank wagons), one side with thread, the
other side with threaded connection
DN 50.
Weight: 2 kg
...................................................44040
44036
44037
Tank truck adapter VK 80
Stainless steel, DIN 28450, one side
curved piece with teflon thread seal,
the other side with threaded connection DN 50.
Weight: 1.7 kg
...................................................44036
Tank truck adapter MK 80
Stainless steel, thread DN 50,
DIN 28450, one side with sealing ring
piece with clamping ring and lever, the
other side with threaded connection
DN 50.
Weight: 2.4 kg
...................................................44037
* = not illustrated
32663-k009-007
21.04.2005
10:58 Uhr
Seite 7
STAINLESS STEEL ARMATURES, SEALINGS,
CHEMICAL RESISTANT HOSES
Tank truck adapter VK 50*
Stainless steel, DIN 28450, one side
with curved piece, the other side with
threaded connection DN 50.
Weight: 1.3 kg
...................................................44038
Tank truck adapter MK 50*
Stainless steel, DIN 28450, one side
with sealing ring piece with clamping
ring and lever, the other side with
threaded connection DN 50.
Weight: 2 kg
...................................................44039
Set of sealings*
for tank truck adapters consisting of:
1 sealing GSD of FKM (Viton) for MK
50 and MK 80,
each 1 thread sealing of PTFE (teflon)
for MK 50 and MK 80,
1 sealing of FKM (Viton) for Unika and
1 sealing of FKM (Viton) for KWZ
...................................................44055
Chemical resistant hoses
All hoses are electrically conductive
and with the exception of the delivery
hose of size C 52 they are suitable
for suction as well as for delivery. The
connection pieces of the couplings are
sealed by means of a sleeve and are
provided with grounding lugs with
screws M 8 and captive wing nuts.
Corrugated hose DN 50*
Stainless steel V4A, with acid
couplings DN 50, parallel corrugation
with wire braiding. Working pressure
10 bar, bending radius 220 mm. One
end with threaded coupling, the other
end with cone-type connection with
nut.
DN 32, 5 m long, 5 kg ................44032
DN 50, 5 m long, 9.5 kg .............44033
Spiral suction and delivery hose*
PVC, with stainless steel acid
couplings DN 50, high resistance to
oils and acids, with plastic spiral,
electrically conductive through copper
strand. Working pressure up to 7 bar,
temperature resistance from -15ºC up
to +60ºC. One end with threaded
connection, the other end with conetype connection with nut.
DN 32, 5 m long, 3 kg ................44028
DN 32, 10 m long, 4 kg ..............44029
* = not illustrated
Non-deformable suction and
delivery hose DN 50*
High resistance to acids and mineral
oils, with acid coupling DN 50. Due to
the small bending radius of 80 mm this
hose is especially suitable for use with
Hydrovac units. The hose core is made
of chloroprene rubber (neoprene) and
the outer layer of nitrile rubber. With
copper strand and pressure carrying
fabric as well as stabilizing PVC spiral.
Working pressure up to 3 bar, bursting
pressure 20 bar. Both ends with
screwed-on clamp. One end with
threaded connection, the other end
with cone-type connection with nut.
15 m long...................................31300
Suction and delivery hose
Resistant to acids and mineral oils,
6 mm strong, complete with acid
couplings DN 50. Marking bluewhite-blue. Inside layer of ultrahigh
molecular polyethylene U-PE,
a pressure carrier of textile braid with
tinned copper fibres and a galvanized
wire spiral. Outside layer of EPDM,
electrically conductive. Working
pressure 16 bar. One end with
threaded connection, the other end
with cone-type connection with nut.
Suction and delivery hose
With even better spectrum of application due to new inside layer.
Resistant to acids and mineral oils,
6 mm strong, complete with acid
couplings DN 50. Marking bluewhite-red.
Inside layer of fluoropolymer, pressure
carrier of textile braid with tinned
copper fibres and a galvanized wire
spiral. Outside layer of chloroprene
(CR), electrically conductive.
Working pressure 16 bar. One end with
threaded connection, the other end
with cone-type connection with nut.
DN 50, 5 m long.........................31325
DN 32, 5 m long* .......................31326
DN 32, 10 m long* .....................31327
Suction and delivery hose*
As art.nos. 31325, 31326 and 31327
above, but one end with threaded
connection DN 50, the other end
notched without coupling.
DN 32, 2.1 m long......................31328
31325
DN 50, 5 m long.........................31320
DN 32, 5 m long* .......................31296
DN 32, 10 m long* .....................31298
31320
09
Suction and delivery hose*
As art.nos. 31320, 31296 and 31298
above, but one end with threaded
connection DN 50, the other end
notched without coupling.
DN 32, 2.1 m long .....................31321
Some articles may not be available in
specific countries. Details on request.
According to DIN 14555-12, 13, 14,
the couplings of the chemical resistant
hoses alternatively can be fastened
with screw clamps, which means that
the couplings can be fixed without
assembly presses. The clamps are
provided with a safety band that
surrounds the coupling safety collar.
This kind of fixture ensures a simple
and quick fastening of the couplings.
Important!
The fixing of the couplings must be
done in compliance with DIN 2817-1
and 2, as well as para 7.5 of DIN
14555-12.
7
32663-k009-008
21.04.2005
10:58 Uhr
Seite 8
HOSES
HAZ-MAT PUMPS AND ACCESSORIES
Spiral suction and delivery hose
DN 32*
As art.no. 44028, but with
clamp fitting................................31309
31104
As art.no. 44029, but with
clamp fitting................................31311
As art.no. 31320, but with
clamp fitting................................31329
As art.no. 31296, but with
clamp fitting................................31313
As art.no 31298, but with
clamp fitting................................31315
As art.no. 31321, but with
clamp fitting................................31330
As art.no. 31325, but with
clamp fitting................................31331
As art.no. 31326, but with
clamp fitting................................31332
As art.no. 31327, but with
clamp fitting................................31333
As art.no. 31328, but with
clamp fitting................................31334
Hoses of other material, construction, coupling as well as diameter
and length on request.
09
Set of worm drive hose clips*
DIN 3017, stainless steel.
5 pcs. clamping range 25 - 40 mm
5 pcs. clamping range 30 - 50 mm
5 pcs. clamping range 50 - 70 mm.
Width 9 mm. Packed in a bag.
Weight: 0.5 kg
...................................................63865
Set of pipe clamps*
Stainless steel, with clamping screw,
2-part, 25 mm wide, consisting of 2
pcs. each for size NW 15, 20, 25, 32,
40, 50, 65, 80, 100, 150, 250 mm.
Packed in a box
...................................................63811
65051
Due to the excellent pumping capacity
even residuals and thin liquid films
are absorbed, even if the delivery is
interrupted frequently by air aspiration.
The hazardous material is not in
contact with the actual pump. The
pulsating pump operation is compensated by the stainless steel pulsator.
With ex-proof three-phase motor
400 V, 2.75 kW, EEx e II T3,
motor protection switch EEx de II CT6,
connecting cable 1.5 m H 0 7 RN-F 5
G 2.5 with 5-pole plug EEx de II CT6,
400 V, 16 A, with light plug socket
EEx de CT6, 230 V.
Size of carrying frame complying with
DIN 14424.
With 4 foldable handles as well as
motor cover of stainless steel.
Performance: 300 l/min
Nominal delivery pressure: 2 bar
Priming time at 7.5 m suction height:
5 sec.
Dim. (LxWxH): 620x390x520 mm
Weight: 98 kg
...................................................65051
Hypalon hose*
with stainless steel coupling connection for ELRO pump
...................................................63838
65057
65058
65056
Delivery hose size C 52-15
Electrically conductive due to copper
strands with captive earthings on the
couplings, resistant to mineral oils.
Warp and filling yarn are double
twisted. Hot vulcanized perbunan
inside lining, abrasion proof outer
coating.
Length: 15 m
Weight: 8.5 kg
DN 50 acid coupling*
Stainless steel, with Viton sealing
...................................................63963
Storz C 52
Stainless steel, with Viton sealing
...................................................31104
ELRO haz-mat pump GUP 3-1.5
DIN 14427 PVR 360/2/93. Self-priming
hose pump with hypalon delivery hose,
electrically conductive, complete with
threaded connection DN 50 on the
delivery outlet elbow and cone-type
connection with nut DN 50 on the
suction inlet elbow of stainless steel.
With FKM (Viton) sealings.
ELRO transport drum
Stainless steel 1.4435, with screw-on
lid, capacity 190 l, vacuumproof.
Flange opening NW 250.
Transport approval UN-1A1.
Weight: 48 kg
...................................................65056
The pump is immediately ready for
use, with quick and automatic aspiration. Trouble-free delivery of semiliquid
or foamy media with solid particles.
8
Some articles may not be available in
specific countries. Details on request.
* = not illustrated
32663-k009-009
21.04.2005
10:59 Uhr
Seite 9
HAZ-MAT PUMPS
AND ACCESSORIES
ELRO fill device
for transport drum, art.no. 65056.
Fits into the drum flange opening NW
250. With 2” male thread inlet with
pipe to drum bottom, 2” male thread
suction outlet with suction strainer and
1” male thread suction outlet with
blank plug and float. To be used in
vacuum operation with ELRO pump.
Made of stainless steel. When using
this fill device the ELRO fitting, art.no.
65058 is required.
Weight: 8.4 kg
...................................................65057
ELRO fitting for fill device
Consisting of: 1 adapter 2” female
thread on DN 50 cone-type connection
with nut and 1 adapter 2” female
thread on DN 50 threaded connection,
both with blank cap.
Weight: 2.4 kg
...................................................65058
ELRO special suction pipe
for removal of small quantities from
gaps, hollow spaces and containers.
One end tapered, the other end with
threaded connection DN 50, stainless
steel.
Dim. (LxØ): 1010 mm x 3/4”
Weight: 2.6 kg
...................................................65054
ELRO low level suction attachment
Stainless steel. For use with low liquid
levels. Housing with perforated base
plate, bore of 10 mm Ø. With threaded
connection DN 50.
Dim. (HxØ): 60x250 mm
Weight: 2.6 kg
...................................................65052
65048
65054
65053
65073
65061
65052
ELRO special suction pipe with ball
valve
Stainless steel, for large quantities,
with threaded connection DN 50.
Length: 920 mm
Weight: 7.1 kg
...................................................65061
ELRO vacuum cleaner
for complete removal of liquid films on
even surfaces (ground, roads).
Suction surface 500x100 mm. With
exchangeable CSM (hypalon) filter
plate, with threaded connection
DN 50, stainless steel.
Length: 1400 mm (with pipe)
Weight: 1.1 kg
...................................................65053
* = not illustrated
delivery of aggressive liquids, mineral
oil products and combustible liquids
of explosion class II A and II B. Pipe
frame and all parts in contact with
liquids are made of stainless steel.
Complete with threaded connection
DN 50 at the delivery outlet and conetype connection with nut DN 50 at the
suction inlet. FKM (Viton) sealings.
Frame with foldable handles and hand
protection. Including pressure-proof
vacuum gauge with vibration absorption. With manually operated piston
pump priming unit. With motor-protection switch, 5-pole/16 A plug and
3-pole/16 A ex-protected light plug
socket, EEx e II T3. Three-phase
motor 400 V/50 Hz, EEx E II T3, power
input 3.0 kW, power output 2.5 kW,
grain passage 10 mm. Self-priming up
to 8.4 m.
Delivery:
620 l/min at 0.5 bar,
550 l/min at 1 bar,
340 l/min at 1.5 bar and
0 l/min at 2 bar.
Dim. (LxWxH): 620x390x460 mm
Weight: 82 kg
...................................................65073
ELRO flexible hose
An easy-to-handle PVC hose with
plastic reinforcement. One end with
threaded connection, the other end
with cone-type connection with nut
DN 50 of stainless steel. Not suitable
for combustible liquids.
5 m long*, 5.4 kg........................65047
10 m long, 8.4 kg .......................65048
ELRO vacuum hose 1”*
One end with threaded connection,
the other end with hose sleeve with
1” union nut.
Length: 10 m
Weight: 8.3 kg
...................................................65049
ELRO lubricant*
Silicone oil (1 l) for ELRO haz-mat
pump
...................................................65069
Haz-mat pump GUP 3-1.5
DIN 14427, MAST
DIN 14427 PVR 354/4/92.
Single-stage self-priming centrifugal
pump, safe to run dry. Designed for
Some articles may not be available in
specific countries. Details on request.
09
Lever operated diaphragm pump
Stainless steel, with acid couplings
DN 50. Delivery 3.5 l per stroke
(150 l/min), delivery height max. 6 m,
suction height max. 5 m, grain
passage at least 10 mm Ø. The flow
direction is clearly marked. Rugged
carrying frame with splash guard over
the elastomere diaphragm. Pump lever
1.2 m with hand guard and stainless
steel acid couplings. Suction side with
cone-type connection and nut,
delivery side with threaded connection.
Weight: 11.5 kg
(illustrated on page 10)
...................................................65084
9
32663-k009-010
21.04.2005
10:59 Uhr
Seite 10
HAZ-MAT PUMPS
AND ACCESSORIES
65084
Motor-protection switch, ex-proof
EEx de II CT6*
for submersible pump, with 10 m of
connecting cable H 0 7 RN-F 5 G 2,5
on feed and discharge side. On one
side with 5-pole plug EEx de II CT6
and on the other side with 4-pole
coupling EEx de II CT6 for connection
to the submersible pump.
Weight: 15 kg
...................................................65680
Please note: Art.no. 65680 is absolutely necessary for the connecting to
a 5-pole 400 V mains/generator.
Set of spare parts for lever operated
diaphragm pump DN 50*
Consisting of each two spare diaphragms, valve clap brackets and
Viton sealings DN 50
...................................................65074
Spare diaphragm*
for lever operated diaphragm pump
...................................................65121
Carrying wire
Stainless steel, for acid submersible
pump, Ø 6 mm, with two load ropes of
0.6 m, with stainless steel carbines
and three loops over the load ropes at
a distance of 1.5 m and a loop at the
end of the wire.
Length: 15 m
Weight: 2 kg
...................................................63976
Drum and tank pump
Consisting of motor and pump gears
suitable for the relevant application.
65679
09
63976
65070
65080
65081
63862
Submersible pump, explosion-proof
Stainless steel 1.4008, EEx de II BT4.
Motor 400 V/1000 W. Delivery approx.
340 l/min at 0.4 bar, sieve for grain size
of up to 8 mm Ø. 8 m connection cable
with ex-proof 4-pole plug EEx de II
CT6 400 V for connection of the
ex-proof motor-protection switch.
With 5 m cable protecting hose of
PTFE (teflon) as well as stainless steel
corrugated hose for additional safety.
Protection against kinking at the pump
inlet. With warning plate:
”Not approved for transferring combustible liquids from containers and
drains/sewers”.
With threaded connection DN 50.
Weight: 45 kg
...................................................65679
Universal motor ME II 5
Ex-proof EEx de II CT6. Power input
540 W, 230 V, 50 Hz, double insulated
complying with protection class II and
protective conductor connection. With
no-volt release, 2-pole on/off switch,
double-pole thermic overcurrent
release. Spray-water protection IP 54.
With 10 m of connecting cable and
ex-proof plug EEx de II CT6, 16 A.
Housing made of special plastics
resistant to impact, acids and solvents. The pump gears are connected
to the motor by means of the hand
wheel.
10
Some articles may not be available in
specific countries. Details on request.
Motor power is transmitted via an
elastic coupling.
Weight: 6.2 kg
...................................................65070
Pump gear
Stainless steel 1.4571, ETFE worm
conveyer, packingless.
Outside diameter 41 mm,
immersion depth 1200 mm,
max. performance 243 l/min,
temperature of pumping medium
max. 100°C.
With threaded connection DN 50.
Dim. (LxW): 1560x320 mm
Weight: 3 kg
...................................................65080
Foot sieve
Stainless steel, Ø 41 mm
...................................................63862
Pump gear
Polypropylene, safe to run dry for a
short time, worm conveyer of teflon
ETFE.
Outside diameter 40 mm,
immersion depth 1200 mm,
max. performance 170 l/min,
temperature of pumping medium
max. 50ºC.
With threaded connection DN 50.
With warning plate: ”Not approved for
transferring combustible liquids”.
Dim. (LxW): 1560x320 mm
Weight: 1.5 kg
...................................................65081
Foot sieve*
Polypropylene, Ø 41 mm
...................................................63969
Earthing cable*
On both ends with cable shoe M 8,
Ø 8 mm. Length: 2.5 m
Attention! Ex-proof only when used
with pump gear of stainless steel
...................................................82122
Pump gear of Hastelloy C*
Material no. 2.4819, slide ring sealing
of ceramics and PTFE, worm conveyer
of ETFE.
Outside diameter 38 mm,
immersion depth 1200 mm,
max. performance 130 l/min,
at 0.2 bar 110 l/min,
temperature of pumping medium
max. 120ºC.
With threaded connection DN 50.
Dim. (LxW): 1560x320 mm
Weight: 10 kg
...................................................63991
* = not illustrated
32663-k009-011
21.04.2005
10:59 Uhr
Seite 1
HAZ-MAT PUMPS
HYDROVAC
HAZ-MAT VACUUM COLLECTING SYSTEMS
65075
1 stainless steel cyclone cover,
art.no. 34082
2 special suction hoses at 15 m,
electrically conductive
1 hand pipe ND 50, 1 m long
1 ground suction nozzle, 500 mm
wide, made of Al Mg 30 (on request
stainless steel)
1 tandem-axle trailer.
Please note: Coupling system must
be stated!
Haz-mat diaphragm pump
Compressed air operated. Made of
electrically conductive PTFE (teflon)
and electrically conductive PP (polypropylene) with special couplings 1/2”
and stainless steel carrying frame with
grounding connection. Drive via
compressed air cylinders, vehicle
brake connections, compressed air
ductwork systems or compressors.
Performance: 10 - 20 l/min
Delivery height: max. 6 m
Suction height, dry: 0.5 m
Suction height, filled: 8 m
Drive pressure: 2 - 6 bar
Air consumption: 50 - 200 l/min
Accessories:
2 stainless steel corrugated hoses
1/2” at 2 m
2 plastic hoses 1/2” at 2 m, resistant
to mineral oils.
Dim. (LxWxH): 150x200x250 mm
Weight: 5 kg
...................................................65075
HYDROVAC haz-mat vacuum
collecting systems
”HYDROVAC” haz-mat vacuum
collecting system type HY C/L 2000*
with integrated oil separator, mounted
on a tandem-axle trailer.
For universal use in haz-mat accidents
for absorbing and transferring as well
as separating oil/water mixtures,
consisting of:
1 stainless steel vacuum generator
1 stainless steel primary separation
chamber of 500 l
2 stainless steel secondary separation
chambers at 250 l
1 vacuum-proof automatic drain
device, art.no. 34083
1 iron-hooped steel drum, 200 l, with
lid, art.no. 65039
* = not illustrated
Technical data:
Performance 20 mbar (98%) and an air
capacity of 200 m3/h. The liquid suction capacity is approx. 350 l/min
when using a hose length of 10 m and
220 l/min at a hose length of 100 m.
Use of longer hoses is possible. The
absorption capacity is 1000 l, limited
transport capacity 750 l.
Approved as working machine by TÜV
Hessen.
Dim. (LxWxH): 3.6x1.9x1.65 m
Total trailer weight: 2000 kg
...................................................34135
34136
34083
34082
With the automatic drainer open containers and tank wagons can be filled
in vacuum operation. Furthermore,
waste water can be let in the sewage
system in vacuum operation
...................................................34083
Cyclone cover
for filling of vacuum-proof collecting
containers in vacuum operation (e.g.
drum with crimped lid made of
1.4301, 1.4571 or galvanized sheet
steel), or for filling from open collecting
containers and tank wagons in
connection with automatic draining
unit, art.no. 34083. The cyclone cover
is used in connection with a vacuum
pump (HYDROVAC unit or ELRO-hose
pump). When the filling level 0.9 is
reached a valve automatically stops
the filling. Suction connection with
cone-type connections DN 50 with
nut, vacuum connection with threaded
connection DN 50
...................................................34082
34082
34133
65039
09
Electric circulating pump
Ex-proof, 400 V/12 kW, on frame, for
multi-purpose vacuum cleaning unit
C/L 2000. On request a high pressure
cleaner for removing of oil marks can
be added to the system. The water
required for this cleaning can be taken
from the HYDROVAC unit. An additional container is required for the
cleaning agent. With this cleaner
the oil marks can be sprayed and the
dissolved oil can immediately be
absorbed
...................................................34136
Automatic draining unit
Only for use with art.no. 34082 (cyclone cover) and a vacuum pump (e.g.
HYDROVAC unit or ELRO hose pump).
Some articles may not be available in
specific countries. Details on request.
”HYDROVAC” haz-mat vacuum
clean-up system HY-1000 / C
Comprising a vacuum generator,
one suction hose reel with 2 nondeformable suction hoses, Ø 50 mm,
at 15 m and a cyclone cover on a 200 l
standard drum, all stored on a transport frame. The function of the unit is
the same as that of HY C/L 200 but no
automatic draining unit is provided.
The hazardous material is transferred
via the cyclone cover into the vacuumproof standard drums (e.g. art.no.
65039 or 63997).
Performance: approx. 350 l/min with
10 m of suction hose and approx.
220 l/min with 100 m of suction hose.
Weight: 180 kg on transport frame
...................................................34133
11
32663-k009-012
21.04.2005
11:00 Uhr
Seite 12
EQUIPMENT FOR COLLECTING,
TRANSPORTING AND STORING OF
HAZARDOUS MATERIAL
Drum 200 l with crimped lid
Stainless steel,1.5 mm, removable lid
with clamping ring and lever fastener,
sponge rubber sealing.
Approv.no. UN/1A2/Y1.5/200D/BMA/9160/BFD/E 46.
Dim. (outside ØxH): 621x890mm
Weight: 39.5 kg
(illustrated on page 11)
...................................................65039
63997
Approv.no. and date of manufacture
are engraved on the container.
Box pallet blue, with jack rings.
65040
Transport container 580 l*
Approv.no. D/BAM/97.582.
Pallet base dim. 800x1200 mm.
Overall dim. (LxWxH):
837x1240x970 mm
Weight: 113 kg
...................................................63992
63993
Salvage drum*
As art.no.65040, but with vent plug 2”
in the centre of the lid
...................................................65041
Drum 200 l
Stainless steel V4A (1.4571), 1.5 mm
strong. Welded hoop-reinforced
bottom, shell with two galvanized
T-hoops. With removable lid, sponge
rubber sealing, clamping ring and lever
fastener.
Dim. (ØxH): 620x887 mm
Weight: 41 kg
...................................................63997
09
Drum insert made of lupolene*
for 200 l drums with clamping lid. The
ideal tool for steel and stainless steel
drums for increasing the storage
capacity of aggressive media. An
economical and practical solution.
Dim. (ØxH): 600x1350 mm
...................................................65030
Transport container for hazardous
liquids
Especially designed for transport of
acids and alkalis. Type tests and transport licence for hazardous materials
class 8 ”corroding agents” have been
obtained. Tank made of crosslinked
polyethylene, with fill opening of
150 mm diameter, with screw lid, with
Viton sealing. Draining by means of a
ball valve DN 32 PP/V with 1 1/4” male
thread, with threaded stainless steel
connection DN 50 with Viton sealing.
Pressure compensation by means of
leak-proof permanent venting valve.
12
Transport container 880 l
Pallet base dim. 1000x1200 mm.
Overall dim. (LxWxH):
1037x1242x1255 mm
Weight: 155 kg
...................................................63993
Salvage drum ”Standard”
Complete with screw lid. For metal
drums with a capacity of up to 250 l.
Material: 100% recycling polyethylene
material, resistant to acids, alkalis
and oils. Standard colour yellow.
Drum adsorbing cartridge*
for art.no. 65041. Made of plastics,
with one outside and one inside
cylinder, incl. shakeproof, highly
effective activated rod-shaped
charcoal filter, for injurious gas
separation. Connection 2” male
thread.
Dim. (ØxL): 119x290 mm
...................................................65034
Spare filling activated charcoal*
...................................................65035
Rain hood for drum adsorbing
cartridge*
...................................................65036
65042
Possible applications:
• For depositing metal drums
• Salvage of agents endangering the
groundwater after average
• Safe storage of salvaged materials
from abandoned factories or
garbage dumping grounds
• Intermediate storage in waste treatment plants
• Repacking in chemical works
Dimensions:
Outside Ø: 1010 mm
Height incl. lid: 1235 mm
Inside height: 1035 mm
Inside Ø top: 847 mm
Inside Ø bottom: 735 mm
Volume: 500 l
Weight: 34 kg
...................................................65040
Some articles may not be available in
specific countries. Details on request.
Drum grabbing device as depositing
aid
Metal, carrying load 450 kg.
Weight: 9 kg
...................................................65042
* = not illustrated
32663-k009-013
21.04.2005
11:00 Uhr
Seite 13
EQUIPMENT FOR COLLECTING,
TRANSPORTING AND STORING OF
HAZARDOUS MATERIAL
Collecting gutter for acids, 4 parts
Stainless steel, 0.5 mm strong. The
parts, length 1800 mm/width 480 mm,
can be connected. With bores for
bracing with 4 cords and carbines,
3 screws with wing nuts and 3 form
holders.
Weight: 25 kg
...................................................63893
65038
Collecting funnel
Made of chemical fibre fabric TPE-C1.
Diameter at the top approx. 1000 mm,
with reinforced edge, eyelets and
plastic pulling rope of 1000 mm. With
tightly fitted threaded connection DN
50 with Viton sealing at the lower end.
Weight: 3 kg
...................................................43490
65108
63877
83423
Salvage drum with lid
Stainless steel V4A (1.4571), volume
approx. 400 l, 1.5 mm strong. Welded
hoop-reinforced bottom, shell with
2 x 3 reinforcement grooves. With
removable lid with sponge rubber
sealing, galvanized clamping ring and
lever fastener.
Dim. (ØxH): 710x1135 mm
Weight: 44 kg
...................................................65038
65098
65097
63893
Collecting container
Stainless steel, with outlet pipe of
600 mm, with threaded connection
DN 50 and grounding connection with
captive wing nut.
Dim. (LxWxH): 400x400x150 mm
Weight: 8 kg
...................................................65098
65109
84166
Bucket
Stainless steel, 15 l, with double
bottom, heavy type, one side flattened.
Weight: 3.8 kg
...................................................63877
Trough
Stainless steel, conical, with two
hinged carrying handles 75x105 mm,
for transporting of hazardous material
as well as for heaping up sand, garden
peat, sawdust, oil binder etc.
Dim. (LxWxH): 610x410x180 mm
Weight: 8 kg
...................................................83423
Funnel
Stainless steel 18/8,
Ø 250 mm.
Weight: 0.5 kg
...................................................84166
43490
Set of containers
Stainless steel, round, total volume
approx. 2500 l. With reinforced edge
as carrying handle. Consisting of
5 containers, one piece each of size
930x800, 930x820, 930x840, 930x860
and 930x880 mm (external dim.)
Weight: 120 kg
...................................................65108
Set of lids
Stainless steel, for set of round
containers, with carrying handles.
Weight: 15 kg
...................................................65109
Bag
PVC, for round containers of stainless
steel. Largely resistant to acids and
alkalis, thickness of material 0.6 mm,
with pulling cord.
Dim. (LxWxH): 950x950x1100 mm
...................................................65105
Hand scoop 1 l*
Stainless steel. Handle 440 mm long,
with hand guard.
Ø 160 mm.
Weight: 0.8 kg
...................................................56868
Collecting gutter for acids
Stainless steel. With threaded stainless
steel connection DN 50, height of
reinforced edge approx. 80 mm.
Dim. (LxW): 2000x450 mm
Weight: 12.5 kg
...................................................65097
* = not illustrated
65105
Scoop 5 l*
Stainless steel. Handle 1200 mm long,
with hand guard.
Ø 260 mm.
Weight: 2.5 kg
...................................................63878
Some articles may not be available in
specific countries. Details on request.
13
09
32663-k009-014
21.04.2005
11:02 Uhr
Seite 14
COLLECTING CONTAINERS
SAMPLING SET
Bag ”Responder”*
Made of multi-layer film foil material
with a very high resistance to chemicals, suitable to set of stainless steel
containers, art.no. 65108
...................................................65028
Ethyl alcohol
500 ml, in bottle
...................................................88201
Package of filtering paper
100 pcs., Ø 11 cm
...................................................88202
Sucker carrying handle*
(1 pair), adheres to all smooth surfaces
due to the vacuum of the two suction
cups. Carrying force 80 kg. Yellow
plastic handle with 2 suction cups,
diameter 120 mm
...................................................65112
Can 20 l*
Stainless steel. Screw plug secured by
chain.
Weight: 4 kg
...................................................56814
Pourer*
Stainless steel, for can, art.no. 56814
...................................................56815
63874
63876
Flask sampler
with fine spigot, for air samples.
Volume 100 ml
...................................................88218
Sampling devices
Box for sampling set
Lid made of PE.
Dim. (LxWxH): 525x455x220 mm
...................................................65107
Universal indication paper
4.8 m, rolled in can, for determining
various chemicals.
Weight: 0.04 kg
...................................................58790
Oil test paper
for determining oil in water or soil.
When in contact with gasoline or oils
the paper takes on a deep violet colour
...................................................62181
Gas collecting bag
5.5 l, with fill hose
...................................................65088
Tube of water detecting paste
Weight: 0.15 kg
...................................................63891
Set of adhesive labels
100 pcs.
...................................................65090
Marking pencil
Not water-soluble
...................................................65113
65089
Bottle for chemicals
100 ml, with screw lid, brown glass
...................................................88214
09
Can 60 l
Made of low-pressure polyethylene,
stackable, blue.
Dim. (LxWxH): 400x330x620 mm
Weight: 3 kg
...................................................63876
Collecting container
Made of low-pressure polyethylene,
approx. 220 l, with reinforced edge,
stackable.
Dim. (LxWxH): 900x540x700 mm
Weight: 11.7 kg
...................................................63874
Equipment for collecting and
storing, please see page 44
onwards.
14
Set of spoons
Chrome-nickel steel 18/8, 4301,
consisting of 3 spoons of various sizes
...................................................88215
Spray bottle
Polyethylene, filled with destilled
water, contents 500 cm3.
Dim. (ØxL): 78x155 mm
...................................................88216
Sampling spoon 0.5 l
with 2-part aluminium handle.
Length: 2.3 m
...................................................65089
Wide-neck bottle
Polyethylene, volume 250 cm3.
Dim. (ØxH): 64x113 mm
...................................................88200
Wide-neck bottle
Polyethylene, volume 1000 cm3
...................................................88217
Some articles may not be available in
specific countries. Details on request.
* = not illustrated
32663-k009-015
21.04.2005
11:02 Uhr
Seite 15
MEASURING DEVICES
REFERENCE BOOKS/TRAINING DOCUMENTS
FOR HAZ-MAT OPERATIONS
”Gefährliche Stoffe/Feuerwehr”*
This data base offers an adaption
(especially for the fire services) of the
chemical and physical material data
considering the aspects ”description
of risks” and ”elimination of risks”.
• Measures to be taken in case of
leakage and fire with information on
breathing and body protection.
• Resistance of protective suits and
material.
• Binding and extinguishing agents.
• Test tubes.
• Manufacturers and TUIS addresses.
• Bibliographical references.
63884
Digital pH meter, battery powered
with 9 V battery, complete with pH
electrode, buffer solution set
(consisting of 2 buffer capsules GPH
4.0 and GPH 7.0) as well as 2 plastic
bottles at 100 ml. In box with cellular
rubber lining.
Measuring range (device):
0.00 ... 14.00 pH
Resolution: 0.01 pH.
Dim. of box (LxWxD): 600x360x85 mm
Weight: 1.1 kg
...................................................63884
Manual ”Hommel-Handbuch der
gefährlichen Güter”*
Complete works, consisting of
Volume 1 - 4, pages 1 - 1612,
list of synonyms/explanations, transport and danger classes
...................................................67110
Orders for separate parts of the
Hommel manual
List of synonyms/explanations*
...................................................67099
Volume I.....................................67100
Volume II....................................67101
Volume III...................................67104
Volume IV ..................................67108
Transport and danger classes*
...................................................67103
PLEASE NOTE:
Manuals and data bases on this
page are available in German
language only!
* = not illustrated
Manual ”Gefahrgut-Ersteinsatz”*
for accidents with hazardous materials
by Dr. H.-D. Nüßler. The German
edition of ”EMERGENCY RESPONSE
GUIDE BOOK for Hazardous
Incidents” by the U.S. Ministry of
Transport, adapted by Dr. Nüssler,
senior fire chief, together with other
fire fighting experts and chemists. The
book states the German names of the
various agents or the haz.-mat. sign
via the UN-nos., the most important
risks and the measures for first intervention as well as the areas of evacuation.
DIN A 4 with spiral binding
...................................................67107
Resistance lists*
for the equipment stored in a haz-mat
vehicle of type GW-G. This list is
compiled in conformity with the
corresponding equipment of a certain
vehicle and informs on the resistance
of the individual pieces of equipment
to approx. 1500 agents.
Dim. (LxWxH): 350x300x350 mm
...................................................67111
Keudel haz-mat data base*
for fire brigades and rescue services,
with well-proven information. On
request supplemented by the module
MET (model for the effects of toxic
gases).
• Compiled by well-known experts.
• Quality certificate DIN EN ISO 9001.
• With insurance coverage in case of
data errors.
• Annual updating since 1987.
• First place at the data base comparision by the Bundesamt für Zivilschutz (Federal office for Civil
Protection) in 1997.
Some articles may not be available in
specific countries. Details on request.
Conditions for hardware and software
acc. to the Microsoft® recommendations for Windows® 3.1/3.11/95/NT.
Authors: Gernot Schneider, Fire Chief
of the professional fire brigade in Freiburg; Winfried Kilb, Niedernhausen;
Dipl.-Ing. Adolf Fleck and Dipl.-Ing.
Andreas Wilhelm from the fire fighting
school Baden-Württemberg in
Bruchsal. Scientific consultants:
Prof. Dr. Klaus D. Pohl and
Dipl.-Chem. Andreas Wieneke,
university of Wuppertal
...................................................58960
”Gefährliche Stoffe/Rettungsdienst”*
This module comprises the most
important information on care and
therapy of injured and contaminated
persons within the rescue chain of
qualified first-aid helper, rescue
service, first-aid doctor and hospital.
Authors: Dr. med. Dipl.-Chem. Richard
Spörri and Roland Walther
...................................................58962
”Gefährliche Stoffe”/SISy Strahlenschutzinformation*
is an integrated part of ”Gefährliche
Stoffe/Feuerwehr” and ”Gefährliche
Stoffe/Rettungsdienst”. Offers a list of
physical data and administrative limit
values as well as the calculation of
dosimetric sizes required for evaluation of a radiation risk.
Author: Dipl.-Ing. Henri W. Graffunder.
Supplementary module ”MET”
Model for Effects of Toxic gases. For
the file ”Gefährliche Stoffe”. This
module makes an immediate evaluation of the effect of toxic gases on
persons staying outdoors or indoors
possible.
Authors: Prof. Dr. sc. nat. Peter Bützer
and Dr. sc. nat. Ivo Silvestri
...................................................58963
15
09
32663-k009-016
21.04.2005
11:03 Uhr
Seite 16
MEASURING DEVICES FOR
HAZ-MAT OPERATIONS
58965
63936
88231
58644
63961
88206
Time measuring device Compact II
Functions: Stop clock, countdown
with alarm, time (24 hours), date.
Dim. (LxWxH): 64x60x16 mm
Weight: 40 g
...................................................88206
SILVA Windwatch
for measuring the wind velocity (in
mph, knots, Beaufort, km/h, m/sec.)
and wind direction. Indication of
temperature in ºC (-20 up to 55ºC) or
ºF (-4 up to 131ºF) and the wind chill
data, together with a compass easy
determination of the wind direction.
Life of the battery approx. 4 years or
100.000 measurings, each of 1 min.
Dim. (LxWxH): 100x40x18 mm
Weight: 42 g
...................................................63936
09
SILVA reflecting compass
25 TD-CL/E
Suitable for position finding and mapplanning. Handy compass housing
with a new easily legible graduation
ring. Incl. gradiometer and battery
powered light for position finding
during night-time. Incl. compass case
(can be fixed e.g. on a belt).
Dim. (WxH): 108x64 mm (with closed
lid)
...................................................63939
16
58897
63939
Manual anemometer
Indication range 0 - 30 m/sec.,
graduated in 1/1 m/sec, also showing
the wind velocity in Beaufort. Black,
scale white, screw-off handle.
Dim. (ØxH): 100x210 mm
Weight: 0.3 kg
...................................................63961
Simultaneous test set I
for inorganic conflagration gases:
• acid gases (hydrochloric acid)
• hydrocyanic acid
• carbon monoxide (CO)
• basic gases (ammonia)
• nitrous gases (nitrogen oxide)
...................................................58965
Wooden case
for smooth transport of the manual
anemometer, art.no. 63961.
Dim. (LxWxH): 245x130x120 mm
Weight: 0.7 kg
...................................................88231
Simultaneous test set II*
for inorganic conflagration gases:
• sulfur dioxide
• chlorine
• hydrogen sulfide
• carbon dioxide
• phosgene
...................................................58966
DRÄGER simultaneous test
The simultaneous test set is based on
Dräger tubes and is an excellent
support for a quick decision on
evaluating and limiting dangers. After
just a few minutes you will know what
gases you have to deal with. Due to
simultaneous measuring of several
gases/steams
• the measuring time is shortened
considerably and
• the information on ”cross evaluations” is available simultaneously.
Each simultaneous test set consists of
5 Dräger test tubes arranged in parallel
in a rubber sleeve. The tube flow line
coordination is such that the same
volume of air flows through all the
tubes at the measuring.
The simultaneous test set is available
in four different versions:
Some articles may not be available in
specific countries. Details on request.
Simultaneous test set III*
for organic fumes:
• ketones (acetone)
• alcohol (methane)
• aromatic compounds (toluene)
• aliphatic hydrocarbons (hexane)
• chlorated hydrocarbons
(perchlorethylene)
...................................................58967
Simultaneous test set indicator
substances*
• carbon monoxide (CO)
• hydrocyanic acid
• hydrochloric acid
• nitrous gases
• formaldehyde
...................................................58968
Adapter for simultaneous test set
for the combination with gas detector
pump ACCURO
...................................................58644
* = not illustrated
32663-k009-017
21.04.2005
11:03 Uhr
Seite 17
GAS DETECTOR PUMP
TEST TUBES
CHIP MEASURING SYSTEM
58897
The set of test tubes consists of
Alcohol 100/a*
Range of measurement
100 - 3000 ppm..........................59040
Ammonia 5/a*
Range of measurement
5 - 70 ppm..................................59041
Hydrocyanic acid 2/a*
Range of measurement
2 - 30 ppm..................................59042
DRÄGER gas detector pump
ACCURO
Always ready for use, easy handling.
Proven one-hand bellows pump, with
integrated squeeze counter and test
tube holder. At each squeeze 100 cm3
of air is delivered.
A detailed test tube handbook is
included. At present approx. 200 test
tubes for various gases and fumes are
available. A detailed list is supplied on
request. The test tubes are not
included, they must be ordered
separately.
Dim. (LxWxH): 170x45x85 mm
Weight: 0.25 kg
...................................................58897
Extension hose*
with test tube holder. For measuring in
inaccessible places. With separate
bag.
Length: 3 m
...................................................58898
Bag*
for gas detector pump ACCURO
...................................................58899
Set of spare parts*
for gas detector pump ACCURO
...................................................58895
DRÄGER test tubes
Set of DRÄGER test tubes*
DIN 14555-12-13-14, with 17 various
packages of test tubes, each of 10 pcs.,
for analysis of gas and air
...................................................59080
Chlorine 0.3/b*
Range of measurement
0.3 - 5 ppm.................................59043
Carbon dioxide 0.1%/a*
Range of measurement
0.1 - 1.2 Vol.%
0.5 - 6 Vol.%...............................59044
Carbon monoxide 10/b*
Range of measurement
10 - 300 ppm
100 - 3000 ppm..........................59045
Hydrocarbons 0.1%/b*
Range of measurement
0.1 - 1.3 Vol.%............................59046
Nitrous fumes 0.5/a*
Range of measurement
0.5 - 10 ppm...............................59057
Phenol 1/b*
Range of measurement
1 - 20 ppm..................................59058
Phosgene 0.02/a*
Range of measurement
0.02 - 0.6 ppm............................59048
Phosphine 0.01/a*
Range of measurement
0.01 - 0.3 ppm
0.1 - 1 ppm.................................59059
Hydrochloric acid 1/a*
Range of measurement
1 - 10 ppm..................................59049
Sulphur dioxide 1/a*
Range of measurement
1 - 25 ppm..................................59060
Hydrogen sulphide 1/c*
Range of measurement
10 - 200 ppm..............................59052
* = not illustrated
Some articles may not be available in
specific countries. Details on request.
Trichloroethylene 2/a*
Range of measurement
2 - 50 ppm
20 - 250 ppm..............................59061
Vinyl chloride 1/a*
Range of measurement
1 - 10 ppm
5 - 50 ppm..................................59055
Polytest*
Qualitative measuring range.......59056
Also available:
Oxygen 5%/B*
(8 pcs.) Range of measurement
5 - 23 Vol.%................................59050
DRÄGER Chip Measurement System
CMS
The CMS is one of the most accurate
and reliable spot measuring systems.
It consists of a substance-specific chip
and an analyzer. The interaction
between the various chips and the
analyzer is controlled by the chip bar
code. The bar code contains all the
essential information such as gas type,
measurement range and other parameters needed for the measurement
evaluation.
The intelligent combination of electronics, mechanics, optics and software
makes the CMS one of the most exact
and handy measuring systems.
Accuracy by means of the mass flow
control and the opto-electronic evaluation with digital readout.
Reliability by means of an automatic
system test, calibrated chips that can
be used for up to two years and a
rugged analyzer.
Simple handling. Straightforward
menu commands in the display and
one-switch operation further simplify
the measurement procedure. With
text in various languages.
Efficient. Short training time only.
Time saving through short measuring
times, no calibration and high flexibility.
Harmless to the environment
by means of very low amount of
chemical reagents, recycling of the
chips by DRÄGER.
The integrated data recorder offers
further advantages:
- Automatic storing of up to 50
measuring results.
- The most important information is
thus available at a later date.
17
09
32663-k009-018
21.04.2005
11:04 Uhr
Seite 2
CHIP MEASURING SYSTEM
AND ACCESSORIES
59090
Telescopic probe
Metal, extensible up to 1.1 m
...................................................58872
Carbon dioxide*
Measuring range 200 - 3000 ppm
...................................................59122
Extension hose, 3 m*
...................................................59092
Carbon dioxide*
Measuring range 1 - 20 Vol.% ....59123
CMS chips
Carbon dioxide*
Measuring range 5 - 150 ppm ....59099
Training simulation*
...................................................59120
Ammonia*
Measuring range 2 - 50 ppm ......59093
Measuring range10 - 150 ppm ...59094
CMS analyzer set
with integrated data recorder. Leather
case also for chips and batteries.
Protection class IP 54 (dust and spray
water protection).
Approvals: BVS Europe, protection
class EEx ib II CT4.
Dim. (LxWxH): 205x92x45 mm
Weight: 0.8 kg
...................................................59090
59091
Petroleum hydrocarbons*
Measuring range 20 - 500 ppm ..59108
Measuring range
100 - 3000 ppm..........................59121
Benzene*
Measuring range 0.2 - 10 ppm ...59095
Measuring range 0.5 - 10 ppm ...59109
Measuring range 10 - 250 ppm
...................................................59141
59096
Mercaptan*
Measuring range 0.25 - 6 ppm ...59144
Methanol*
Measuring range 20 - 500 ppm ..59145
Nitrous fumes*
Measuring range 0.5 - 15 ppm ...59100
Measuring range 10 - 200 ppm ..59124
Perchloroethylene*
Measuring range 5 - 150 ppm ....59101
Phosgene*
Measuring range 0.05 - 2 ppm ...59146
Phosphine*
Measuring range 1 - 25 ppm ......59147
Measuring range 20 - 500 ppm ..59148
Measuring range 200 - 5000 ppm
...................................................59150
Propane/butane*
Measuring range 100 - 2000 ppm
...................................................59151
Hydrochloric acid*
Measuring range 1 - 25 ppm ......59102
Measuring range 20 - 500 ppm ..59103
09
Remote system
for measurement in inaccessible
places, incl. 3 m extension hose
...................................................59091
Hydrocyanic acid
Measuring range 2 - 50 ppm
...................................................59096
Chlorine*
Measuring range 0.2 - 10 ppm
...................................................59097
Ethanol*
Measuring range 100 - 2500 ppm
...................................................59142
i-propanol*
Measuring range 40 - 1000 ppm
...................................................59143
Carbon dioxide*
Measuring range 1000 - 25000 ppm
...................................................59098
58872
18
Some articles may not be available in
specific countries. Details on request.
Sulphur dioxide*
Measuring range 0.4 - 10 ppm ...59104
Measuring range 5 - 150 ppm ....59125
Hydrogen sulphide*
Measuring range 2 - 50 ppm ......59105
Measuring range 20 - 500 ppm ..59106
Measuring range 100 - 2500 ppm
...................................................59126
Nitrogen dioxide*
Measuring range 0.5 - 25 ppm ...59107
Toluene*
Measuring range 10 - 300 ppm ..59127
Vinyl chloride*
Measuring range 0.3 - 10 ppm ...59128
Measuring range 10 - 250 ppm ..59110
o-Xylene*
Measuring range 10 - 300 ppm
...................................................59129
* = not illustrated
32663-k009-019
21.04.2005
11:04 Uhr
Seite 1
EX MEASURING DEVICES
AND ACCESSORIES
GAS DETECTION BOX
DRÄGER-PAC-EX
Pocket-size measuring instrument with
extraordinary features for monitoring
of combustible gases or vapours in
ambient air.
• Adaptable to various applications
due to individual ex-calibration.
• Push buttons can be controlled also
with gloves.
• The alarm signal is extremely loud
and can be heard far away.
• Illuminated display; the dates can
be read also in the dark.
• Three measuring ranges with
autoranging function.
• Four adjustable alarm thresholds.
• Rugged housing. In spite of its low
weight it can withstand great
mechanical loads.
• Alarm in case of low battery charge
or malfunction.
• For use as measuring as well as
warning apparatus.
Standard measuring range:
0 - 100% UEG
0 - 5 Vol.-% CH4 (methane)
5 - 100 Vol.% CH4 (methane)
Power supply: NiCd battery
replaceable
Ingress protection: IP 55 (certified by
TÜV Südwest)
Approval: BVS Ex s II CT4.
Dim. (LxWxH): 142x66x27 mm
Weight: 0.37 kg
...................................................58823
58823
Belt bag*
for Pac-Ex
...................................................58830
58826
Hand pump*
for Pac-Ex
...................................................58833
58824
Pump adapter*
for connection to the hand pump
...................................................58867
Plug-in charger 230 V/50 Hz
for charging module for 2 units
...................................................58862
58824
58862
Telescopic probe*
Complete with accessories, consisting
of:
• Telescopic probe, extensible up to
1.1 m
• Hand pump
• Pump adapter
• Hoop for the telescopic probe
...................................................58875
Float probe, hose for float probe,
Viton hose, plastic telescopic probe
(air), metal telescopic probe - please
see page 21, accessories for MULTIWARN II.
Car and single charger
”Standard” for Pac-Ex, consisting of:
single charging module and car
adapter (12/24 V)
...................................................58831
09
58831
DRÄGER gas detection box
Empty, for gas detecting and
measuring apparatus and 18 types
of test tubes. Portable mini-laboratory
for detection of hazardous gases and
determination of an explosion risk as
well as lack of oxygen.
Dim. (LxWxH): 400x350x220 mm
Weight: 6 kg
...................................................63921
Charging module
for 2 Pac-Ex
...................................................58824
Power pack 230 V/50 Hz
for max. 4 charging modules for 2 units
...................................................58826
* = not illustrated
Leather bag*
for Pac-Ex, shoulder bag.
(Pac-Ex is completely covered)
...................................................58828
Some articles may not be available in
specific countries. Details on request.
Kit for gas detection box
Consisting of:
- 8 bottles for smell and soil samples
- Spoon
- Universal indication paper
- Check list and information
...................................................58827
19
32663-k009-020
21.04.2005
11:05 Uhr
Seite 2
EX MEASURING INSTRUMENTS
AND ACCESSORIES
DRÄGER gas detection instrument
MULTIWARN II
The MULTIWARN II series represents
the ideal solution when it comes to
monitoring the concentration of
several gases simultaneously and
continuously.
Depending on the task you may
choose from various combinations
with an infrared sensor, an EX-sensor
and up to three electrochemical
sensors.
The ideal instrument for versatile and
sophisticated tasks, for instance
• for use by fire brigades
• in the petrochemical industry
• in the chemical industry
• in gas and water works.
If required an internal heavy-duty flow
controlled pump can be chosen.
For use in areas with risk of explosions
an easily exchangeable heavy-duty
NiCd rechargeable battery with indication of charging level or an alkali
charging unit for customary alkali
batteries are available.
Dim. (WxHxD): 55x110x65 mm
Weight: 1 kg
MULTIWARN II Basic
with maximum one catalytic
Ex-sensor and three electrochemical
sensors.
The unit can be equipped with data
memory and/or internal pump (incl.
pump adapter, water and dust filter).
09
Multiwarn II BP*
(Basic instrument with pump)
incl. display, visual and audible alarms,
keyboard, flow-controlled internal
pump, pump adapter, water filter,
carrying straps and user’s manual
(without rechargeable batteries,
sensors and language module)
...................................................59216
Multiwarn II BD
(Basic diffusion instrument)
incl. display, visual and audible alarms,
keyboard, carrying straps and user’s
manual (without rechargeable
batteries, sensors and language
module)
...................................................59215
59215
IR-CO2 25 carbon dioxide*
Measuring range 0 - 25 Vol.%
...................................................59225
IR-EX*
Measuring range 0 - 100 Vol.% CH4
0 - 100% LEL .............................59226
Sensors for MULTIWARN II
Standard and Basic
MULTIWARN II Standard
with maximum one infrared sensor,
one catalytic sensor and three
electrochemical sensors.
The unit can be equipped with data
memory and/or internal pump (incl.
pump adapter, water and dust filter).
Multiwarn II SD*
(Standard diffusion instrument)
incl. display, visual and audible alarms,
keyboard, carrying straps and user’s
manual (without rechargeable
batteries, sensors and language
module)
...................................................59217
Multiwarn II SP*
(Standard instrument with pump)
incl. display, visual and audible alarms,
keyboard, flow-controlled internal
pump, pump adapter, water filter,
carrying straps and user’s manual
(without rechargeable batteries,
sensors and language module)
...................................................59218
NiCd charger*
with intelligent charging electronic
system for operation of three highenergy consumers (infrared sensor,
catalytic Ex-sensor and internal heavyduty pump) and four low-energy
consumers (three electrochemical
sensors and electronic system).
Operation period: 8 - 12 hours
...................................................59219
Alkali charger*
...................................................59220
Alkali battery (baby) T 4*
for alkali charger
...................................................59221
Language modules on request.
20
Sensors for MULTIWARN II Standard
Some articles may not be available in
specific countries. Details on request.
Cat-Ex sensor*
Measuring range 0 - 100% LEL
...................................................59227
O2-LS oxygen*
Measuring range 0 - 25 Vol.%
...................................................59228
CO carbon monoxide*
Measuring range 0 - 500 ppm
...................................................59229
H2 S 100 hydrogen sulfide*
Measuring range 0 - 100 ppm
...................................................59230
H2 S 500 hydrogen sulfide*
Measuring range 0 - 500 ppm
...................................................59231
NO nitrogen monoxide*
Measuring range 0 - 100 ppm
...................................................59232
NO2 nitrogen dioxide*
Measuring range 0 - 20 ppm
...................................................59233
SO2 sulphur dioxide*
Measuring range 0 - 20 ppm
...................................................59234
NH3 ammonia*
Measuring range 0 - 300 ppm
...................................................59235
HCN hydrocyanic acid*
Measuring range 0 - 50 ppm ......59236
CI2 chlorine*
Measuring range 0 - 10 ppm ......59237
OV ethylene oxide*
Measuring range 0 - 50 ppm ......59238
OV-A*
Measuring range 0 - 50 ppm ......59239
Hydride (PH3 etc.)*
Measuring range 0 - 1 ppm ........59240
* = not illustrated
32663-k009-021
21.04.2005
11:16 Uhr
Seite 1
ACCESSORIES FOR EX MEASURING INSTRUMENTS
RADIATION DOSE RATE MEASURING SYSTEMS
PH3 500 Phosphine*
Measuring range 0 - 500 ppm
...................................................59241
CO2 carbon dioxide*
Measuring range 0 - 5 Vol.%
...................................................59242
58834
The above sensors are preset with
the standard measuring range and
installed into the device in case of an
order.
An order for a MULTIWARN
measuring device consists of the
following parts:
•
•
•
•
The unit (Basic or Standard)
Language module incl. program
Charging unit
Sensors
Accessories for MULTIWARN II
Single charger 230 V*
for Multiwarn II
...................................................58871
Car charging unit 12/24 V
for Multiwarn II
...................................................58876
58876
Adapter for car charging unit
12/24 V*
...................................................58877
Float probe
(without hose), for suction of standing
water in pits
...................................................58834
Hose for float probe
(per metre)
Electrically conductive (not for H2S).
Please state length when ordering.
...................................................58835
* = not illustrated
58835
Viton hose (per metre)*
Resistant to solvents.
Please state length when ordering
...................................................58836
Telescopic probe*
Plastic, extensible up to 1.15 m,
in plastic case
...................................................58816
Continuous battery check, sealed for
submersion up to 1 m depth,
EMV/NEP-proof.
Approval for the fire services:
DL/FW/GSF 058810.
Technical data:
Nominal photo energy range:
45 keV - 2 MeV
PTB measurement range:
100 μSv/h - 1 Sv/h
Type of GM tube: ZP 1310 (18509)
Dose rate alarm threshold: 25 μSv/h
Approved for official calibration by
PTB: 23.01/88.01
Power supply: 9 V energy block,
approx. 350 hours.
Dim. (WxHxD): 82x152x39 mm
Weight: 0.4 kg (without battery)
...................................................88095
88095
Telescopic probe*
Metal, extensible up to 1.1 m
...................................................58872
Leather bag*
for Multiwarn II ...........................58873
Radiation dose rate measuring
systems, GRAETZ
Dose rate measuring system
X 50 DE
for measuring gamma radiation and
X-rays according to DIN 6818. With
built-in GM tube, large digital dose
rate indication on LC-display (illuminable), additional quasi analoguous
dose rate indication as ”pointer” instrument. Automatic switching of indication ranges, microprocessor electronics with self-test, large size function
buttons, dose rate indication reacting
quickly to changing dose rates, mean
value can be faded out, dose rate
alarm threshold, switchable acoustic
single-pulse indication, decontaminable housing. With a variety of attachable external probes for the expansion
of operating scope, e.g. for dose rate
measurements up to 10 Sv/h, for
detection of alpha, beta, gamma contamination, for checking of liquids,
automatic probe recognition, directly
to be combined with telescope probe
through row of contacts (at rear of
housing).
Some articles may not be available in
specific countries. Details on request.
Dose rate measuring system
X 5 DE*
As art.no. 88095 above.
Approval for the fire services:
DL/FW/GSF 029012.
Technical data:
Nominal photo energy range:
48 keV - 1.3 MeV
PTB measurement range:
1 μSv/h - 20 mSv/h
Type of GM tube: ZP 1200 (18503)
Dose rate alarm threshold: 7.5 μSv/h
Approved for official calibration by
PTB: 23.01/88.09.
Dim. (WxHxD): 82x152x39 mm
Weight: 0.4 kg (without battery)
....................................................88080
21
09
32663-k009-022
21.04.2005
11:08 Uhr
Seite 2
RADIATION DOSE RATE MEASURING SYSTEMS
High-dose probe 18529 DE*
DIN 6818, automatic probe recognition by the basic instrument.
Connection to the basic instrument
either directly or through a cable of
up to 100 m length.
Approval for the fire services:
for X 50 DE or X 5 DE.
Technical data:
Energy range: 80 keV - 2 MeV
Measuring range/decades:
500 μSv/h - 9.99 Sv/h/6 decades
PTB approval: 23.22/89.04
...................................................88098
Telescope probe DE
Dose rate measurement acc. to DIN
6818.
Measuring of high dose rates from a
safe distance. Simple adaptation to
basic unit (X 50 DE or X 5 DE) by snapin technique. Variably extensible up to
4.30 m. Stainless steel telescope;
built-in low and high dose GM tube;
dose rate measurable up to 10 Sv/h;
automatic change of measurement
range; no separate batteries for telescope probe necessary, voltage supply
from basic unit.
Approval for the fire services:
DL/FW/GSF 068911.
09
Technical data:
Energy range:
Low dose probe: 60 keV - 1.3 MeV
High dose probe: 60 keV - 3 MeV
PTB measuring range:
1.5 μSv/h - 10 Sv/h
Type of GM tube:
ND ZP 1400 (18504)
HD ZP 1300 (18529)
Dose rate alarm threshold:
same as in basic unit
PTB approval: 23.22/89.06.
Dim (WxHxD): 120x920(4300)x80 mm
Weight: 2.6 kg
...................................................88097
Aluminium case
for telescope probe DE incl. basic unit
and accessories.
Dim. (WxHxD): 180x850x135 mm
Weight: 3.5 kg
...................................................88147
22
88081
88147
88097
88144
88099
88095
Probe cable D
Length: 1.25 m
...................................................88099
Electronic dosimeter
with warning functions EDW 150 F.
Dosimeter for gamma radiation and
X-rays according to DIN 6818. Small
and handy; digital dose indication on
LC-display (67 digits); measurement of
radiation in front of the user in a solid
angle of 180º due to uniquely shaped
housing; 5 selectable dose warning
thresholds; 2 selectable dose rate
warning thresholds. For safety reasons
the dose measurement cannot be
switched off. Storage of dose value for
up to approx. 12 hours with removed
batteries.
Protection class IP 67.
Approval for the fire services:
DW/FW/IdF 04 94 10.
Technical data:
Nominal energy range: 75 keV - 3 MeV
PTB measuring range: 5 μSv - 10 Sv
Type of GM tube:
C 300 (Centronic)
Dose rate alarm thresholds:
25 μSv/h/1 Sv/h
Dose alarm thresholds:
5, 15, 50, 100, 250 mSv
Power supply:
3 lady cells LR 1, 1.5 V.
Dim. (WxHxD): 40x136x17 mm
Weight: 0.16 kg
...................................................88081
Some articles may not be available in
specific countries. Details on request.
88082
Dose rate measuring system X 5 C
for measuring gamma radiation and
X-rays according to DIN 6818. Built-in
GM tube. Large digital dose rate indication on LC display (illuminable);
optional dose rate indication or dose
indication with integration time;
additional quasi analoguous dose rate
indication on three decades of logarithmic bar indication. Indication of the
dose rate peak value and the dose rate
average value. 4 free programmable
dose alarm and dose rate alarm thresholds. Automatic or manual storing of
dose rate measuring values with date
and time; menu-controlled operation,
in part protected by pass-word. The
housing can easily be decontaminated. Sealed for submersion of up to
1 m depth.
(IP 67) RS 232 interface.
Approval for the fire services is applied
for.
Technical data:
Energy range: 40 keV - 1.3 MeV
Dose rate indication range:
1 μSv/h - 20 mSv/h
Dose indication range: 1 μSv - 10 Sv
Dose rate alarm thresholds:
4 free programmable,
1 μSv/h - 20 mSv/h
Dose alarm thresholds:
4 free programmable, 1 μSv - 10 Sv
Power supply:
9 V energy block 6 LR 61.
Dim. (WxHxD): 82x152x39 mm
Weight: 0.4 kg
...................................................88082
* = not illustrated
32663-k009-023
21.04.2005
11:08 Uhr
Seite 1
RADIATION DOSE RATE MEASURING SYSTEMS
Dose rate alarm device
GAMMATEST 1
DIN 6818, for the safety of persons
staying in a place endangered by
gamma radiation and X-rays. With
4 adjustable alarm thresholds. When
a set alarm threshold is reached, an
acoustic alarm is triggered (75 dB,
measured at a distance of 1 m).
Approval for the fire services:
DLW/FW/GSF 127702/2.
Evaluation and programming unit
AG 02 TDW
for TDW 100 F.
Approval for the fire services:
DW/FW/GSF 048005.
Dim. (WxHxD): 110x188x60 mm
Weight: 0.6 kg
...................................................88143
88143
Dose measuring and alarm device
TDW 100 F
(Alarmdosimeter) for measuring the
personal dose and as a dose alarm
device for gamma radiation and
X-rays.
Approval for the fire services:
DW/FW/GSF 037903/2.
Technical data:
Energy range: 83 keV - 2 MeV
Dose alarm thresholds:
5 mSv, 15 mSv, 100 mSv, 250 mSv
Power supply:
2 round cells IEC R 6.
Dim. (WxHxD): 72x125x26 mm
Weight: 0.23 kg
...................................................88142
* = not illustrated
88103
88125
88109
Technical data:
Energy range: 48 keV - 2 MeV
Alarm thresholds:
0.025 - 0.05 - 1 - 10 mSv/h
PTB approval: 23.03/83.30
Power supply:
2 round cells IEC R 6.
Dim. (WxHxD): 72x125x26 mm
Weight: 0.23 kg
...................................................88144
88142
88107
Four different types are available
(only together with gamma probe
6150 AD-15, art.no. 88109):
Dose film cassette
(Filmdosimeter) without film with steel
clip, orange. Standard version for
gamma radiation and X-rays. The film
can be obtained and evaluated by the
official institutes for personal dose
measurement.
Dim. (WxHxD): 42x53x8 mm
Weight: 0.014 kg
...................................................88125
Radiation measuring instruments
AUTOMESS
Dose rate measuring device
6150 AD
Universal radiation measuring device
for alpha, beta, gamma radiation and
X-rays, with internal tube and tube
probes. Parallel coverage of dose rate,
dose, average value and peak value of
dose rate, with read-back LC-display.
Automatic switching on and changing
of the ranges and units, even during
probe operation. Adjustable alarm
thresholds. Computer controlled compensation of the tube tolerances: Very
high measuring accuracy even when
devices and probes are changed.
Extremely low power consumption:
1000 hours with a 9 V battery
(IEC 6 LR 61).
Aluminium diecast housing, watertight.
Approved for calibration.
Validity of calibration: 6 years.
Dim. (WxHxD): 80x130x29 mm
Weight: 0.4 kg
Some articles may not be available in
specific countries. Details on request.
Dose rate measuring device
6150 AD-1
Dose rate: 0.2 - 999 mSv/h
Dose: 5 μSv - 9.99 Sv
5-step dose rate alarm threshold,
adjustable.
Approval for the fire services:
DL/FW/GSF 128206
...................................................88107
Dose rate measuring device
6150 AD-2
Dose rate: 0.5 μSv/h - 9.99 mSv/h
Dose: 5 μSv - 99.9 mSv
5-step dose rate alarm threshold,
adjustable.
Approval for the fire services:
DL/FW/GSF 128207
(illustrated on page 24)
...................................................88108
Dose rate measuring device
6150 AD-5*
Dose rate: 0.2 - 999 mSv/h
Dose: 0.05 μSv - 9.99 Sv
Dose rate and dose alarm thresholds
freely programmable, indication of the
standard deviation in per cent.
Approval for the fire services:
DL/FW/IdF 059517
...................................................88110
Dose rate measuring device
6150 AD-6*
Dose rate: 0.5 μSv/h - 9.99 mSv/h
Dose: 0.05 μSv - 99.9 mSv
Dose rate and dose alarm thresholds
freely programmable, indication of the
standard deviation in per cent.
Approval for the fire services:
DL/FW/IdF 059518
...................................................88111
23
09
32663-k009-024
21.04.2005
11:07 Uhr
Seite 2
RADIATION DOSE RATE MEASURING SYSTEMS
AND ACCESSORIES
Gamma probe 6150 AD-15
High dose rate probe.
Dose rate: 0.01 mSv/h - 9.99 Sv/h
Dim. (LxØ): 135x40 mm
Weight: 0.08 kg
(illustrated on page 23)
...................................................88109
Probe cable 700.1.6
for connecting the probe to the dose
rate measuring device 6150 AD.
Length: 1.25 m
Weight: 0.09 kg
(illustrated on page 23) ...............88103
Belt bag 700.1.121*
with window for dose rate measuring
device 6150 AD.
Weight: 0.05 kg
...................................................88105
Bag, artificial leather 700.1.1*
for 1 dose rate measuring device
6150 AD, gamma probe 6150 AD-15
and probe cable.
Dim. (LxWxH): 205x195x63 mm
Weight: 0.5 kg
...................................................88106
Handle extension 770.1-60*
Length: 770 mm
Weight: 0.5 kg ............................88126
Tube extension 770.1-70*
Several extensions can be put
together.
Length: 775 mm
Weight: 0.5 kg ............................88127
Test radiation emitter 6708*
1 kBq Am241, 2 kBq Sr90, for test
measurings on 6150 AD-k.
Weight: 0.01 kg ..........................88128
88133
88121
88134
88100
88108
Contamination detection probe
6150 AD-k
for connection to the dose rate
measuring device 6150 AD of any
version. Closed tube, no gas flushing,
ready for immediate use.
Tube window: 170x100 mm, 2 mg/cm2
2 types of operation: ”Alpha” and
”Alpha/Beta/Gamma”
Measuring range: up to 20000 s-1.
The adjustable probe handle can be
extended.
Attention: Art.no. 88114 does not
include dose rate measuring device
6150 AD!
Dim. (LxWxH): 210x120x90 mm
Weight: 1.3 kg
...................................................88114
Teletector probe 6150 AD-t
for plugging onto a dose rate
measuring device 6150 AD. Radiation
measuring device with tube telescope
probe for gamma radiation and X-rays.
Detection of beta radiation.
Safety through distance: Telescope
probe extensible up to 4.12 m.
Measuring ranges:
Dose rate: μSv/h - 9.99 Sv/h
Dose: 5 μSv - 9.99 Sv
Beta detection in range up to 10 mSv/h
Approved for calibration.
Validity of calibration: up to 6 years.
Approval for the fire services:
DL/FW/GSF 128608
(only together with a dose rate
measuring device 6150 AD)
Attention: Art.no. 88100 does not
include dose rate measuring device
6150 AD!
Dim. (LxWxH): 910-4120 mm
(depending on extension) x130x90 mm
Weight: 3 kg
...................................................88100
24
Some articles may not be available in
specific countries. Details on request.
88114
Aluminium case 6112 B-150*
for 1 Teletector probe 6150 AD-t and
1 dose rate measuring device 6150 AD
Dim. (LxWxH): 752x175x125 mm
Weight: 3.2 kg
...................................................88101
Aluminium case 6605 K*
for 6150 AD-k, 6150 AD-15 and
probe cable.
Dim. (LxWxH): 350x400x110 mm
Weight: 3 kg
...................................................88117
88108
09
Probe cover 6112 B-142*
for the teletector telescope.
Weight: 0.2 kg
...................................................88115
Dose rate alarm device 6126
for gamma radiation and X-rays, with
tube. Acoustic alarm threshold
adjustable to 25 μSv/h, 1 mSv/h or
10 mSv/h. Easy to handle, small, lightweight and rugged.
Approval for the fire services:
DLW/FW/GSF 027201
Power supply:
9 V battery IEC 6 LR 61.
Dim. (LxWxH): 140x60x30 mm
Weight: 0.22 kg
...................................................88133
Alarm dosimeter ADOS-F
with tube for gamma radiation and
X-rays. For the safety of task force in
disaster control.
Dose alarm threshold 5, 15, 100,
250 mSv. Indication of the set
threshold, read-back display of the
remaining time until the threshold is
reached.
Dose range 0.005 mSv to 9999 mSv.
Read-back dose indication. Rugged
watertight aluminium cast housing.
Approval for the fire services:
D/FW/GSF 109009
Power supply:
9 V battery IEC 6 LR 61.
Dim. (WxHxD): 60x97x23 mm
Weight: 0.2 kg
...................................................88134
* = not illustrated
32663-k009-025
21.04.2005
11:07 Uhr
Seite 1
RADIATION DOSE RATE MEASURING SYSTEMS
AND ACCESSORIES
Test radiation emitter
6706/6706-1
Gamma radiation source for function
and calibration tests of radiation dose
rate measuring devices.
Nuklid Cs-137/333 kBq.
Approval for calibration test for:
Dose rate measuring device 6150 AD
1/2/5/6,
Gamma probe 6150 AD-15 and
Teletector probe 6150 AD-k.
Weight: 1.6 kg
...................................................88121
Radiation dose measuring
devices and accessories
Make ESM EBERLINE
Contamination measuring device
CONTAMAT FHT 111 M
Measuring device for detection and
evaluation of surface contamination by
alpha, beta and gamma radiation. Also
suitable for detection of tritium.
Spraywater-tight housing. Tube with
fine-meshed grid. Analogous and
digital measuring data indication with
automatic measuring range switchover. The large control panel can be
operated even with gloves.
If one of the two adjustable alarm
thresholds is exceeded, a visual as
well as an audible alarm is triggered.
Indication range: 0 - 19.999 s-1
Power supply:
5 baby cells 1.5 V IEC R 16, sufficient
for approx. 150 hours of continuous
operation.
Approval for the fire services:
K/FW/GSF 058807/1.
Dim. (LxWxH): 210x135x115 mm
Weight: 1.5 kg
...................................................88156
* = not illustrated
Butane flow tube
with additional protective grid.
Size of window: 166 cm2, for alpha
and beta radiation
...................................................88157
88222
88225
Xenon large-area tube
with additional protective grid.
Size of window: 166 cm2, for beta and
gamma radiation
...................................................88151
Tritium tube
Size of window: 7.1 cm2
...................................................88152
Butane gas mixture
100 ml ampoule
(5 pcs. are required)
...................................................88150
Test radiation emitter
AM 241/Sr90/1850 Bq*
...................................................88153
Spare foil frame
Set of 5 pcs.
...................................................98961
Wooden case
DIN 14880-2 H, for transport and
protection of the above devices.
Dim. (LxWxH): 350x400x220 mm
Weight: 8 kg
...................................................88149
Dose alarm device FH 41 FM
for measuring of gamma radiation and
X-rays during personal dose control.
The apparatus is carried on the body
and determines the dose to which
the carrier is exposed. When a preset
dose value is reached, an alarm signal
is triggered. A dose rate alarm
threshold gives a warning if the max.
determinable dose rate is exceeded.
The display informs the carrier of the
time limit for his stay in the critical
area.
Approval for the fire services:
DW/FW/GSF 059008/1.
Technical data:
Dose alarm thresholds:
5, 15, 100, 250 mSv
Dose rate alarm threshold:
10 Sv/h
Power supply:
9 V battery IEC 6 LR 61.
Dim. (LxWxH): 120x50x25 mm
Weight: 0.15 kg
...................................................88220
Some articles may not be available in
specific countries. Details on request.
88220
88190
Radiameter FH 40 F
Portable device for analogous and
digital measuring value indication, for
measuring of the local dose rate of
gamma radiation.
When using an external probe the
device automatically switches over to
the right measuring and indication
range. Three buttons are sufficient for
measuring, checking and adjusting.
When one of the preset alarm thresholds is reached, an alarm is triggered.
In addition to the value indicator a
loudspeaker can be connected for the
acoustic reproduction of the impulses.
If the indication range is exceeded or
in case of low battery capacity, a
corresponding message appears on
the display. Housing of impactresistant synthetic material.
Microprocessor controlled electronic
system.
Radiameter FH 40 F 1
Approval for the fire services:
DL/FW/GSF 128306/1
Energy range: 40 keV - 3 MeV
PTB measuring range:
200 μSv/h - 0.99 Sv/h
Indication range: 3 μSv/h - 999 mSv/h
PTB approval: 23.01/84.06
Power supply:
9 V battery IEC LF 22
Protection class: IP 65.
Dim. (LxWxH): 160x85x40 mm
Weight: 0.5 kg
...................................................88190
25
09
32663-k009-026
21.04.2005
11:07 Uhr
Seite 2
RADIATION DOSE RATE MEASURING SYSTEMS
AND ACCESSORIES
Radiameter FH 40 F 2*
Approval for the fire services:
DL/FW/GSF 058809/1.
The approval for the fire services is
only valid together with the high-dose
external probe FHZ 130 A
(not included in the scope of supply).
Energy range: 45 keV - 1.3 MeV
PTB measuring range:
0.50 μSv/h - 9.9 mSv/h
Indication range:
0.01 μSv/h - 9.99 mSv/h
PTB approval: 23.01/84.09
Power supply:
9 V battery IEC LF 22
Protection class: IP 65.
Dim. (LxWxH): 160x85x40 mm
Weight: 0.5 kg
...................................................88221
High-dose gamma probe FHZ 130 A
for radiameter FH 40 F 2,
art.no. 88221.
Measuring range:
100 μSv/h - 9.99 Sv/h,
Test radiation emitter FH 35 D,
Cs-137/333 kBq, incl. storage box, for
function control of the radiameters
FH 40 F 1/FH 40 F 2/FH 40 G and
FH 40 G-L as well as extension of the
validity of the calibration of the
FH 40 F 2.
(illustrated on page 25)
...................................................88222
Radiameter FH 40 G*
Advanced version of the FH 40 F
series. A single proportional tube is
sufficient as a detector for the total
measuring range. The microprocessor
continuously controls the proportional
tube and thus the indicated measuring
values are subject to constant quality
assurance. With connections for PC
and external probes.
Approval for the fire services:
DL/FW/IdF 029819
Energy range: 36 keV - 1.3 MeV
PTB measuring range:
0.1 μSv/h - 0.99 Sv/h
Indication range: 0.01 μSv/h - 1 Sv/h
PTB approval: 23.03/95.26
Power supply:
2 round cells 1.5 V IEC R 6
Protection class: IP 67
(watertight down to a depth of 1 m).
Dim. (LxWxH): 195x73x42 mm
Weight: 0.4 kg
...................................................88228
88232
88224
Test radiation emitter FH 35 D*
Cs-137/333 kBq
...................................................88223
09
Bracket for FH 35 D
Required for function test of the radiameter with the test radiation emitter
FH 35 D
...................................................88224
Probe cable
for connection of an external probe.
Length: 1.25 m.
(illustrated on page 25)
...................................................88225
Tele probe FH 40 FE*
for measuring the gamma dose rate in
places difficult to reach.
Approval for the fire services:
DL/FW/GSF 059013.
The following instrument is required:
Radiameter FH 40 F 1 or FH 40 F 2.
Indication range:
0.01 μSv/h - 9.99 Sv/h.
Telescope length: 3.26 m
Weight: 2.1 kg (without radiameter)
...................................................88226
26
88227
88234
Storage case
Aluminium/plastics, for tele probe
FH 40 FE-G or FH 40 FE for one
radiameter and one tele probe.
Dim. (LxWxH): 900x160x140 mm
Weight: 1 kg
...................................................88227
88235
88234
88233
NBR probe FHZ 672-E
for highly sensitive gamma
measurings, for sensitive detection of
artificial radiation sources in changing
natural radiation fields. Aluminium
housing with handles and bracket for
FH 40-G.
...................................................88233
Spiral cable
0.3 ... 1.2 m for external probe of
FH 40-G
...................................................88234
88229
Radiameter FH 40 G-L
As art.no. 88228 above, but:
Energy range: 36 keV - 1.3 MeV
PTB measuring range:
0.1 μSv/h - 25 mSv/h
PTB approval: 23.01/96.06
...................................................88229
Tele probe FH 40 FE-G
also for measuring of beta-contaminations.
The following instrument is required:
Radiameter FH 40 G or FH 40 G-L.
Measuring range: 10 nSv/h - 10 Sv/h
Telescope length: 3.6 m
...................................................88232
Some articles may not be available in
specific countries. Details on request.
Storage case
for FHZ 672-E, hard-top case for one
radiameter FH 40-G as well as the
NBR probe FHZ 672-E.
Dim. (LxWxH): 470x390x190 mm
Weight: 1 kg
...................................................88235
Roll of adhesive tape*
Yellow background, with black edge,
black radiation base sign and the word
”Radioaktiv” in black.
Dim. (LxW): 66x0.015 m
...................................................99220
Roll of cordon-off tape with the
word ”RADIOAKTIV”*
Dim. (LxW): 500x0.08 m
...................................................99221
* = not illustrated
32663-k009-027
21.04.2005
11:06 Uhr
Seite 1
ACCESSORIES FOR RADIATION MEASURINGS
CONTAMINATION PROTECTIVE CLOTHING
88195
Long pliers
with mobile claws for gripping of
radiated items.
Length: 1250 mm
Weight: 0.6 kg
...................................................88195
61326
Foil welder POLYSTAR 100 GE
Impulse transmitter with adjustable,
electronic welding timing relays.
ON/OFF switch with pilot lamp for
function control. For welding of e.g.
foils up to 2 x 0.3 mm. For connection
to the impulse welding pliers POLYSTAR 40 C with a seam length of
400 mm.
Provided with a diode in the pliers’
head for controlling the welding procedure. With 3 m of connecting cable.
Dim. (LxWxH):
Polystar 100 GE: 355x190x115 mm
Welding pliers Polystar 40 D:
410x220x65 mm
Weight: 8.1 kg (complete)
...................................................61326
PE welding foils on request.
* = not illustrated
88178
ISOTEMP contamination protective
suit KONTAC 200/A
Approval for the fire services:
KSA/FW/GSF 028809.
Consisting of: Protective suit with
close-fitting hood with face seal, with
braided zippers in the sleeves and legs
and covered zipper at the back.
Material: NOMEX III, permanently antistatic and flame retarding, resistant to
oil and water. White.
Use: Protects the BA-wearer against
dusty and liquid radioactive isotopes.
Breathing protection: The face seal fits
with all full face masks, EN 136. The
breathing apparatus is worn over the
suit.
One size for all.
Space required (WxHxD):
280x340x70 mm
Weight: 1.1 kg
...................................................88178
88183
1 zipper in the back with bulge
for the compressed air breathing
apparatus.
Material and use:
As art.no. 88178 above.
Breathing protection:
The compressed air breathing
apparatus is worn under the suit.
Size: Standard size up to body size
185 cm (oversize on request).
Space required (WxHxD):
250x450x210 mm
Weight: 1.9 kg
...................................................88183
88179
ISOTEMP contamination protective
hood KONTAC 200/H
Approval for the fire services:
KSA/FW/GSF 028810.
Hood with face seal, with long chest
and shoulder protection.
One size for all.
Space required (WxHxD):
180x180x30 mm
Weight: 0.1 kg
...................................................88179
Packing bag*
for KONTAC 200/A and 200/A/PA
...................................................88185
ISOTEMP contamination protective
suit KONTAC 200/A/PA
Approval for the fire services:
KSA/FW/IdF 049411.
Consisting of: Protective suit (onepart with fixed hood for all types of
helmets) with 2 sleeve and leg zippers.
Some articles may not be available in
specific countries. Details on request.
27
09
32663-k009-028
21.04.2005
11:06 Uhr
Seite 2
CONTAMINATION PROTECTIVE CLOTHING
MINERAL OIL PROTECTIVE CLOTHING
Special mineral oil protective suit
”ISOPANT”
Coated cotton fabric with flame retardent, poretight and mineral oil resistant
special plastic coating. Protective
effect because
1. due to the tightness of the pores no
inflammable liquid can come in
contact with the skin
2. if the liquid should ignite, the flames
and heat make the material swell
and incrust. In this way the material
takes up the effect of flames and
heat and prevents the otherwise
non-avoidable perilous burns.
88184
ISOTEMP contamination protective
hood KONTAC 200/H/PA
Approval for the fire services:
KSA/FW/IdF 049412.
Featuring: Total protection of head,
helmet and mask; with wide front
protection; with velcro waist fastener.
Fits with all types of helmets.
Net visual field: 110x270 mm.
One size for all.
Space required (WxHxD):
300x300x150 mm
Weight: 0.6 kg
...................................................88184
Contamination protective gloves*
EN 374, PVC-coated, green, with
gauntlet, size N = 9 1/2 - 11.
Length: 60 cm
Weight: 0.4 kg (pair)
...................................................88167
09
28
Features:
• Permanently heavily inflammable,
DIN 53906
• Permanently watertight DIN 53886
• Absolutely airtight
• Largely resistant to acids and alkalis,
DIN 32762
• Surface resistance at 5x108 ohm
Protective hood with short waistcoat*
Material as art.no. 57313.
The hood is worn over the helmet, with
exchangeable flame protective sieve
200x250 mm and polyglass window.
Short waistcoat with 3 press button in
front and 2 buckles at the side.
Orange.
Weight: 1.3 kg
...................................................57314
5-finger gloves, dark blue*
Material as art.no. 57313, lined, for
hooking on to the short waistcoat of
the protective hood.
Length: 36 cm
Weight: 270 g
...................................................92781
Packing bag*
for a 2-part ”ISOPANT” suit, one
protective hood and one pair of
5-finger gloves
...................................................63899
These special protective suits are
designed for self-protection of persons
in contact with easily inflammable
liquids but not for active fire fighting.
Due to the required tightness of the
pores the material is not breathing.
Vent openings, however, are provided
in suitable places.
Special protective suit*
2-part, orange, (optional black/blue).
Jacket without pockets with fold-down
collar and covered zipper. Sleeves with
elastics and vent holes in the arm-pit
area.
Dungarees with adjustable waistband
without side pockets. Pocket in chest
flap. Elastic and adjustable braces.
Bottom of legs with elastics.
Weight: 2.4 kg
Size 48 - 54
...................................................57313
Oversize 56 - 60
...................................................57310
Some articles may not be available in
specific countries. Details on request.
* = not illustrated
32663-k009-029
21.04.2005
11:06 Uhr
Seite 29
LEAK SEALING BAGS
AND ACCESSORIES
VETTER leak sealing bags
working pressure max. 1.5 bar
for sealing of pipes, tanks, drums, road
tank trucks or rail tank wagons with
diameters from 48 cm onwards.
Material: Polyamide fabric reinforced
top plate, self-extinguishing, antistatic, resistant to oil and ozone, good
resistance to chemicals.
Leak sealing bag LD 50/30 W*
with swivel eyes. The highly mobile
fasteners allow the bags to be spread
and tensioned at all angles.
Sealing surface: 500x300 mm
Content: 7 l.
Dim. (LxWxH): 690x310x20 mm
Weight: 6.9 kg
...................................................63686
64390
Leak sealing bag LD 50/30 S
with belt guiding slits, no sparking
swivel eyes, no metal fittings. The
ratchet belts press the bag down on
the leak.
Sealing surface: 500x300 mm
Content: 7 l.
Dim. (LxWxH): 615x300x20 mm
Weight: 4.2 kg
...................................................64390
64396
Set of sealing plates for LD 50/30 W
and LD 50/30 S
Consisting of
2 sealing plates resistant to heating oil.
Dim. (LxWxH):
600x300x30 mm (a plate)
...................................................63682
Acid protective cover for
LD 50/30 W*
PVC, yellow, for protecting the bag
from aggressive agents
...................................................63681
Accessories for leak sealing bags
and leak drainage bags
Acid protective cover for LD 50/30 S
...................................................64392
64392
Set of tensioning belts for
LD 50/30 W*
Material: Polyester, 50 mm wide,
tensile strength 4000 kg.
Consisting of
1 ratchet belt, 2 m, orange
1 ratchet belt, 2 m, blue
1 fastening belt, 5 m, orange
1 fastening belt, 5 m, blue
...................................................63680
Set of tensioning and extension
belts for LD 50/30 W, LD 50/30 S and
DLD 50/30*
Material: Polyester, 50 mm wide,
tensile strength 4000 kg.
Consisting of
1 tensioning and extension belt,
10 m, orange, with ratchet;
1 tensioning and extension belt,
10 m, blue, with ratchet
...................................................63683
Stainless steel ball valve Storz D*
for leak drainage bag DLD 50/30 and
vacuum leak drainage bag
DLD 50 VAC
...................................................42251
09
93110
VETTER leak drainage bags
working pressure max. 1.5 bar
for simultaneous leak plugging and
liquid drainage.
Leak draining bag DLD 50/30
with stainless steel coupling size
Storz D.
Sealing surface: 500x300 mm
Drain compartment: 400x200x35 mm
Content: 2.5 l.
Dim. (LxW): 620x300 mm
Weight: 7.6 kg
...................................................64396
* = not illustrated
63682
Sealing plate for LD 50/30 W and
LD 50/30 S
Dim. (LxWxH): 1000x300x30 mm
...................................................93110
Some articles may not be available in
specific countries. Details on request.
29
32663-k009-030
21.04.2005
11:05 Uhr
Seite 30
LEAK SEALING BANDAGES
PIPE/GULLY SEALING BAGS
AND ACCESSORIES
63333
64394
63588
63587
63332
63586
63684
09
63685
63590
VETTER leak sealing bandages
working pressure max. 1.5 bar
for sealing leaks on pipes and round
containers in the diameter range from
50 to 480 mm. For staunching long
tears in the side of a tank.
Dual fitting safety controller 1.5 bar
for simultaneous inflation of 2 bags or
bandages. With 2 safety valves,
2 manometers and 2 shut-offs.
Weight: 2.6 kg
...................................................63590
Leak sealing bandage LB 5 - 20
Sealing surface: 190 mm wide
Nominal content: 8 l
Dim. (LxW): 980x210 mm
Weight: 2.3 kg
...................................................63332
Inflation and safety hose
1.5 bar, 10 m, blue*
with safety valve 1.5 bar,
tyre valve, deflation valve and nipple.
Weight: 1.8 kg
...................................................63593
Leak sealing bandage LB 20 - 48
Sealing surface: 190 mm wide
Nominal content: 16 l
Dim. (LxW): 1770x210 mm
Weight: 3.6 kg
...................................................63333
Pressure reducer 200/300 bar*
with 2 m of connection hose and
nipple, 2 manometers and safety
valve.
Weight: 1.5 kg
...................................................63297
Inflation hose 10 m, blue
Complete with quick-action couplings.
Weight: 1.4 kg
...................................................63685
Compressed air cylinder
4 l/200 bar*
Ø 115 mm,
Length with valve: 585 mm.
Weight: 6.1 kg (filled)
...................................................58861
Controllers for use with leak sealing
bags, leak drainage bags, leak
sealing bandages and pipe sealing
bags when compressed air
cylinders are used.
Single fitting controller 1.5 bar
for inflation of one bag or bandage.
With safety valve, manometer and
shut-off.
Weight: 1.5 kg
...................................................63684
30
Compressed air cylinder
6 l/300 bar (steel)*
Ø 140 mm,
Length with valve: 605 mm.
Weight: 11.5 kg (filled)
...................................................58769
Compressed air cylinder
10 l/200 bar*
Ø 170 mm,
Length with valve: 675 mm.
Weight: 13.6 kg (filled)
...................................................58864
Some articles may not be available in
specific countries. Details on request.
VETTER pipe sealing bags
working pressure max. 1.5 bar
for sealing gullies and sewer pipes
after haz-mat accidents to prevent
groundwater pollution.
Material: Robust rubber material,
resistant to most chemicals.
Pipe sealing bag RDK 7/15*
for pipes of 70 - 150 mm
Cylinder length: 300 mm
Total length:
350 mm
Diameter:
68 mm
Weight: 0.5 kg
...................................................64400
Pipe sealing bag RDK 10/20
for pipes of 100 - 200 mm
Cylinder length: 510 mm
Total length:
570 mm
Diameter:
90 mm
Weight: 1.2 kg
...................................................63586
Pipe sealing bag RDK 20/40
for pipes of 200 - 400 mm
Cylinder length: 510 mm
Total length:
570 mm
Diameter:
195 mm
Weight: 3.1 kg
...................................................63587
Pipe sealing bag RDK 30/60
for pipes of 300 - 600 mm
Cylinder length: 735 mm
Total length:
780 mm
Diameter:
295 mm
Weight: 7 kg
...................................................63588
Pipe sealing bag RDK 50/80*
with PE core, for pipes of 500-800 mm
Cylinder length: 566 mm
Total length:
620 mm
Diameter:
450 mm
Weight: 27 kg
...................................................64401
* = not illustrated
32663-k009-031
21.04.2005
11:24 Uhr
Seite 31
PIPE/GULLY SEALING BAGS
VACUUM LEAK DRAINAGE BAGS
AND ACCESSORIES
Pipe sealing bag RDK 50/100
for pipes of 500 - 1000 mm
Cylinder length: 1110 mm
Total length:
1170 mm
Diameter:
450 mm
Weight: 17 kg
(illustrated on page 30)
...................................................64394
Pipe sealing bag RDK 50/120*
with PE core,
for pipes of 500 - 1200 mm
Cylinder length: 900 mm
Total length:
940 mm
Diameter:
450 mm
Weight: 41 kg
...................................................64395
Foot pump*
420 cm3/stroke, incl. 2 m of air hose,
with nipple
...................................................63299
VETTER vacuum leak drainage bags
with accessories
for leak sealing without belts, on
clean, smooth and slightly curved surfaces. For use on tank trucks or rail
tank wagons, large containers and
storage tanks.
Dual connector 300 bar*
for simultaneous draining of 2 compressed air cylinders of 300 bar.
Weight: 0.8 kg
...................................................63336
Set of adapters*
for connecting the various compressed air sources to the controller,
consisting of truck compressed air
connection, blind coupling, truck tyre
inflator adapter, truck tyre valve, truck
tyre valve connection, compressed air
mains, adapter pouch, green air supply
hose of 10 m, green air supply hose of
10 m with ball valve.
Weight: 5 kg
...................................................63575
Hand pump*
520 cm3/stroke, incl. 2 m of air hose,
with nipple
...................................................63298
* =not illustrated
64410
64409
64408
64411
63685
64405
Vacuum leak drainage bag
LD 50/30 VAC
Larger sealing surface: 500x300 mm
Dim. (LxWxH): 950x320x160 mm
Weight: 7 kg
...................................................64407
Pipe sealing bag RDK 60/120*
for pipes of 590 - 1200 mm
Cylinder length: 1300 mm
Total length:
1360 mm
Diameter:
580 mm
Weight: 25 kg
...................................................64402
Dual connector 200 bar*
for simultaneous draining of 2 compressed air cylinders of 200 bar.
Weight: 0.8 kg
...................................................63274
64407
Controller 1.5 bar, with deadman
lever
for LD 50/30 VAC
...................................................64408
Vacuum leak drainage bag
DLD 50 VAC
(Round), incl. vacuum connection with
vacuum nozzle, transparent venting
and draining hose of 5 m and Ø 9 mm,
shut off unit, manometer, stainless
steel connection V4A, size Storz D.
Ø 500 mm
Weight: 5.2 kg
...................................................64405
Stainless steel ball valve Storz D*
Please see page 29, art.no. 42251
Air supply hose of 10 m*
Green, with shut-off valve
...................................................64406
Air supply hose of 10 m, green
Complete with quick-action couplings.
Weight: 1.4 kg
...................................................64409
Inflation hose 10 m, blue
Please see page 30, art.no. 63685
Sealing plate
Resistant to heating oil.
Dim. (LxWxH): 600x300x30 mm
...................................................64410
Venting and draining hose 5 m
Transparent
...................................................64411
Pressure reducer 200/300 bar*
Please see page 30, art.no. 63297
Compressed air cylinder
6 l/300 bar*
Please see page 30, art.no. 58769
Some articles may not be available in
specific countries. Details on request.
31
09
32663-k009-032
21.04.2005
11:23 Uhr
Seite 32
MINI LEAK SEALING BAGS
GULLY SEALING BAGS, SEALING LANCE
PIPE SEALING SLEEVES
64389
63589
VETTER sealing sets
09
VETTER set of mini leak sealing
bags 1.5 bar
for plugging of leaks on small drums,
pipes, iron-hooped barrels and
containers of diameter from 100 to
900 mm.
Consisting of:
LDK 10/10
(sealing surface 95x95 mm),
LDK 10/25
(sealing surface 95x255 mm),
LDK 20/20
(sealing surface 195x195 mm).
Foot pump with safety valve,
2 tensioning belts 150 cm long, blue,
with velcro strip fastener,
3 tensioning belts 300 cm long, blue,
with velcro strip fastener,
1 yellow portable case.
Dim. (LxWxH): 600x400x135 mm
Weight: 8.6 kg
...................................................64389
VETTER set of universal gullysealing bags 2.5 bar
for quick sealing of all road gullies with
outlets of 100 to 150 mm, to keep out
pollutants after accidents with
hazardous goods.
Consisting of:
4 universal gully sealing bags 2.5 bar,
type 10/15 with 2.5 m inflation hose
and 2.5 m tethering line,
foot pump with safety valve and manometer,
exchangeable positioning rod 1.5 m,
yellow portable case.
Dim. (LxWxH): 600x400x185 mm
Weight: 12.1 kg
...................................................63589
VETTER set of compact gully
sealing bags with compressed air
inflation device*
for emergency sealing of gullies and
manholes ranging from 300 to 500 mm
in diameter, with a maximum pondage
height of 0.5 mWH, where no backpressure or underpressure is expected
in the sewer network.
Consisting of:
Compact gully sealing bag with 2 m of
inflation hose and 2 m of tethering line.
Working pressure 0.3 bar. Inflation and
safety device with finger-tight connector, pressure reducer, safety valve
0.3 bar, manometer, quick-action
coupling, compressed air cylinder
1 l/200 bar, EN 849, yellow portable
case.
Dim. (LxWxH): 600x400x135 mm
Weight: 9.7 kg
...................................................58640
32
63386
VETTER set of leak sealing lances
1.5 bar
for fast sealing of leaks by a single
person on tank trucks, rail tank
wagons and storage tanks.
No tensioning belts are required.
Consisting of:
1 wedge-type bag 6
(230x60x50 mm)
1 wedge-type bag 8
(230x80x55 mm)
1 wedge type bag 11
(230x110x70 mm)
1 cone-type bag 7
(230x70 mm Ø)
3 lances at 350 mm
1 PVC hollow rod with chain and
nipple
1 shut-off unit
1 drip protection
1 foot pump with safety valve, 1.5 bar,
with manometer
1 yellow portable case.
Dim. (WxHxD): 400x300x183 mm
Weight: 6.5 kg
...................................................63386
VETTER set of pipe sealing sleeves*
for mechanical sealing of pipelines
operating at up to 16 bar.
Material: Malleable iron with perbunan
sealings, consisting of:
7 sealing sleeves 1/2 bis 2 1/2”
1 stud driver for socket head screws
1 wrench for socket head screws
1 portable case.
Dim. (LxWxH): 400x300x183 mm
Weight: 13.1 kg
...................................................63385
Pipe sealing sleeve 3”*
Weight: 3.85 kg
...................................................63340
Pipe sealing sleeve 4”*
Weight: 5.7 kg
...................................................63341
Some articles may not be available in
specific countries. Details on request.
* = not illustrated
32663-k009-033
21.04.2005
11:23 Uhr
Seite 33
MISCELLANEOUS SEALING EQUIPMENT
56962
61987
61986
56963
Pit covering
(Adjustable shape) tearproof PVC bag,
conically shaped, resistant to mineral
oils, with plastic pull cord at the top.
The covering is placed over the gully
inlet and quickly filled with water.
Base dimensions: 750x750 mm
Height: 550 mm
Weight: 1.2 kg
...................................................56962
83444
83443
Quick-action sealing wedge
for lateral gully inlets, made of cellular
plastics, waterproof and impermeable
to air. Conical sponge rubber sealing
wedge resistant to mineral oils.
Dim. (LxWxH): 450x200x250 mm
Weight: 0.4 kg
...................................................83443
Pit covering*
Perbunan, resistant to oil and acids.
Base dimensions: 750x750 mm
Height: 400 mm
Weight: 2 kg
...................................................56961
Quick-action sealing wedge
for lateral gully inlets, made of cellular
plastics, waterproof and impermeable
to air. Conical sponge rubber sealing
wedge resistant to mineral oils.
Dim. (LxWxH): 800x500x200 mm
Weight: 0.4 kg
...................................................83444
Sponge rubber sealing plate
for use with pit coverings, art.nos.
56962 and 56961.
Dim. (LxWxH): 900x900x20 mm
Weight: 0.3 kg
...................................................56963
Tensioning and extension belt*
Orange, with ratchet, tensile strength
4000 kg.
Dim. (LxW): 10 m x 50 mm
Weight: 2.6 kg
...................................................63920
Set of tank sealing wedges
DIN 14555, 20 pcs., soft wood. 5 pcs.
each of size 200, 150, 100 and 50 mm.
In a bag.
Dim. (LxW): 300x70 mm
Weight: 11.6 kg
...................................................61987
Set of tank sealing plugs
DIN 14555, 20 pcs., soft wood.
Of different diameters. 5 pcs. of
Ø 90/25 mm, 5 pcs. of Ø 60/10 mm,
10 pcs. of Ø 30/10 mm. In a bag.
Length: 300 mm
Weight: 3.5 kg
...................................................61986
Set of sealing plugs*
PP, conical, 10 pcs., length of plugs
150 mm, consisting of
6 pcs. Ø 50/10 mm,
4 pcs. Ø 25/5 mm
...................................................65091
Sealing bandage*
Plastic petrolatum bandage.
Dim. (LxW): 10 m x 100 mm
Weight: 1.2 kg
...................................................98942
Plate*
Stainless steel, 0.5 mm strong.
Dim. (LxW): 1000x500 mm
Weight: 2 kg
...................................................65093
Plate*
Soft PVC, 5 mm strong.
Dim. (LxW): 1000x500 mm
Weight: 3 kg
...................................................65094
* = not illustrated
Some articles may not be available in
specific countries. Details on request.
33
09
32663-k009-034
21.04.2005
11:23 Uhr
Seite 34
SEALING EQUIPMENT
GROUNDING MATERIAL
Rubber strips*
Resistant to mineral oils, 3.5 mm
strong.
Dim. (LxW): 1000x300 mm
Weight: 1.3 kg
...................................................65092
82125
82144
Sealing hemp 1 kg*
Packed in PVC tool bag,
art.no. 106084
...................................................32621
Lead wool*
Packed in PVC tool bag,
art.no. 106084
...................................................87611
63390
63391
82147
As a paste for leaks
Adheres even to greasy and rusty
tanks. In tin.
Weight: 440 g
...................................................63390
Drum for 50 m of grounding strand
All plastic, with brake.
Dim. (WxHxD): 264x365x200 mm
Weight: 1.6 kg (empty)
...................................................82125
Sand bag with pull cord*
Empty, for approx. 15 kg.
Dim (LxW): 600x300 mm
Material: Jute
Weight: 0.1 kg
...................................................61961
Material: Synthetic fibres
Weight: 0.08 kg
...................................................61962
As a paste for leaks
Resistant to acids. In tin.
Weight: 430 g
...................................................63391
Grounding pin
with T-handle and 3 grounding bolts
with captive wing nuts M 8,
galvanized.
Length: 550 mm
Weight: 1 kg
...................................................82144
Sedimit leak sealing compound
A non-poisonous, granulated material.
When mixed with water and kneaded
an impervious mash is formed that
controls combustible and other
hazardous liquids. This compound
can be used for sealing of leaks up to
a hydrostatic pressure of approx. 4 m,
e.g. also for reducing and draining off
liquids leaking through dams.
The material is composed of a polymer
with high water absorption and a
betonit groundmass. Due to its microstructure the polymer absorbs water
up to 300 times its own weight,
thus achieving a sealing effect and
preventing further penetration of
mineral oils, acids and chemicals.
Safe and easy application.
Quick binding cement*
5 kg bucket
...................................................65063
Rolled lead*
1 mm strong.
Weight: 3 kg
...................................................98730
09
53485
As a granulated material*
In plastic bucket.
Weight: 21.5 kg
...................................................63389
Special connection screw clamp*
Brass. For grounding at hydrants, roof
gutters etc. Opening up to 110 mm,
with screw for connection of the
grounding strands.
Weight: 1 kg
...................................................61955
Adhesive magnet for grounding
with wing nut M 8 for connection of a
grounding strand.
Dim. (ØxH): 80x20 mm
Weight: 0.8 kg
...................................................53485
Grounding strand 16 mm2
Copper strand, on both ends with
hook-shaped open cable shoe for
connection to the special connection
screw clamp, art.no. 61955, as well as
to other grounding connections
50 m long, plastic jacketed
Weight: 9.5 kg
...................................................82147
2.5 m long, plastic jacketed*
Weight: 0. 5 kg
...................................................82151
10 m long, plastic jacketed*
Weight: 1.9 kg
...................................................82152
34
Some articles may not be available in
specific countries. Details on request.
* = not illustrated
32663-k009-035
21.04.2005
11:23 Uhr
Seite 35
NON-SPARKING TOOLS
Flat chisel
Non-sparking, copper-beryllium.
Dim. (LxW): 310x22 mm
Weight: 0.8 kg
...................................................61652
61888
61875
61892
61857
Non-sparking tools
Multi-purpose shovel, tub-shaped
Compregnated laminated wood. With
handle and Y-grip.
Dim. (LxW): 1200x370 mm
Weight: 2 kg
...................................................61892
Shovel
Similar to DIN 20123, made of nonsparking alloy. Handle with Y-grip.
Dim. of blade (WxL): 250x300 mm
Total length: 1000 mm
Weight: 2.5 kg
...................................................61888
Pickax
Similar to DIN 20109,
copper-beryllium, with stick
1.5 kg*
Dim. (LxW): 800x400 mm
Weight: 1.8 kg
...................................................61873
3 kg
Dim. (LxW): 950x550 mm
Weight: 3.8 kg
...................................................61875
Spade
Similar to DIN 20127, made of nonsparking alloy, handle with T-grip.
Dim. of blade (WxL): 185x280 mm
Total length: 1160 mm
Weight: 2.6 kg
...................................................61857
* = not illustrated
Hand protecting attachment
Plastic, for chisels of Ø 16-20 mm.
Weight: 0.3 kg
...................................................61653
56861
98916
”Stomax” water wiper
SILUMIN casting, with perbunan strip,
resistant to mineral oils, PVC-coated
aluminium handle.
Dim. with stick (LxW): 1500x600 mm
Weight: 1.4 kg
...................................................56861
Piassava broom
Broom wood 340x75 mm, with handle,
handle hole Ø 27 mm,
bristle length 135 mm,
wooden handle 1400x28 mm.
Weight: 0.8 kg
...................................................98916
61653
61763
61352
61151
61652
61162
61141
Rubber hammer
Dim. with handle (WxH): 65x115 mm
Weight: 0.5 kg
...................................................61141
Wooden hammer B
with metal jacket.
Dim. (LxWxH): 360x160x80 mm
Weight: 0.8 kg
...................................................61162
Some articles may not be available in
specific countries. Details on request.
Water pump pliers
Similar to DIN 5231, non-sparking,
copper-beryllium.
Opening 50 mm.
Length: 300 mm
Weight: 0.6 kg
...................................................61352
Elbow pliers 2”
Opening up to 55 mm, made of nonsparking material.
Length: 560 mm
Weight: 2.4 kg
...................................................61763
Pipe spanner*
Adjustable, non-sparking, made of
copper-beryllium, for pipe diameters
of 6 up to 65 mm.
Length: 620 mm
Weight: 4 kg
...................................................61825
Copper hammer
1000 g, non-sparking, sledge-shaped,
with handle.
Weight: 1.1 kg
...................................................61151
Fitter’s hammer*
500 g, similar to DIN 1041, nonsparking, made of copper-beryllium.
Weight: 0.65 kg
...................................................61114
Screw driver*
Non-sparking, width of blade 4 mm.
Length: 165 mm
Weight: 0.03 kg
...................................................61451
Tool bag*
PVC
...................................................55112
Tool bag*
Leather.
Dim. (WxHxD): 430x170x260 mm
...................................................63918
35
09
32663-k009-036
21.04.2005
11:22 Uhr
Seite 36
OIL AND ACID BINDING AGENTS
WITH ACCESSORIES
OIL AND CHEMICAL BINDING AGENTS
Shovel for removing oil binding
agents
Stainless steel, for removing floating oil
binding agents
61923
with 1-part handle, 2 m
Total length: 2.5 m
Weight: 4 kg
...................................................61928
Universal spreader for oil and acid
binding agents, type 221
2-wheel type, spreading width 45 cm.
Volume 20 l, with adjustable spreading
rail
...................................................61923
61927
61928
09
62175
Sieve and cleaning shovel
Buoyant, for removing of binding
agents and for cleaning of all types of
waters. With removable and adjustable
2-part aluminium handle of 2 m, frame
of synthetic material, aluminium grid
as a fine sieve.
Dim. (WxH): 280x360 mm
Weight: 1.75 kg
...................................................61927
”Öl-Ex” sieve rake
Aluminium, buoyant, for cleaning the
water surface from oil binding agents
and other floating items.
4-part handle of aluminium.
Total length: 3 m.
Dim. (LxWxH): 1000x220x80 mm
Weight: 2 kg
...................................................62175
36
with 2-part handle, 2 m*
Total length: 2.5 m,
length of the handle part with shovel:
1.5 m.
Weight: 4.5 kg
...................................................61929
Oil and chemical binding agents
”Öl-Ex” powder: type I and II ”R”*
The exceptionally efficient and lowpriced oil and chemical binding agent,
based on synthetic material, for water
and soil - classified as type II and
type II ”R” -. This powder does not
release already absorbed oil. Buoyant
for days. Good pumping ability as the
powder is non-abrasive.
Bulk weight: 49 g/l.
PE bags with 100 l.
Absorbing capacity up to 600% of its
own weight.
Weight: 7 kg per bag
...................................................62171
”Öl-Ex 82” type I and II ”R”*
The heavy oil binding agent with higher
bulk weight and coarse grains, lowdusting - classified as type I and II ”R”
- for use on large and small water
surfaces as well as on land. Quality
rating ”R”: Good non-skid ability on
roads!
Bulk weight: 250 g/l.
PE bags with 70 l.
Weight: 16 kg per bag
...................................................62160
TERRAPERL S, type III ”R”
Universal absorbing agent, heavy, for
cleaning of floors in industrial plants
and for sprinkling on oil marks on
roads. Not water-repellent, nonbuoyant.
Bulk weight: 500 g/l.
Liquid absorption approx. 22 l per bag.
Packed in plastic bags.
Weight: 20 kg per bag
...................................................62145
TERRAPERL S ”Spezial”,
type III ”R”*
Universal absorbing agent.
Bulk weight: 100 g/l.
Liquid absorption approx. 80 l per bag.
in 20 kg plastic bag...................62147
in 10 kg bag...............................62148
Ekoperl 33 - standard quality,
type II*
Mineral-based.
Bulk weight: 85 g/l.
Absorption up to approx. 300% of its
own weight.
Weight: 9 kg per bag
...................................................62141
Ekoperl 66 - special quality,
type I and II ”R”
Mineral-based, particularly strong.
Bulk weight: 144 g/l.
Absorption up to approx. 250% of its
own weight.
Weight: 14 kg per bag
...................................................62142
Special acid binding agent
Ekoperl 99*
In 100 l plastic bag.
Weight: 28 kg per bag
...................................................62143
”Öl-Ex hard”: type III ”R”
The universal absorbing agent for all
liquids on the ground, on roads, in
workshops, in industrial plants etc.
Easy to handle with a spreader.
Quality rating ”R”: Good non-skid
ability even when fully saturated, does
not release absorbed agents even
under heavy load.
High bulk weight: 1200 g/l.
Packed in rugged plastic valve bags.
Weight: 20 kg per bag
...................................................62161
Some articles may not be available in
specific countries. Details on request.
* = not illustrated
32663-k009-037
21.04.2005
11:22 Uhr
Seite 37
OIL AND CHEMICAL BINDING AGENTS
62142
62145
62161
62170
UNI-SAFE
The universal oil and chemical binding
agent approved as type III R according
to the rules for oil binding agents. An
essential part is a polymer with enormous absorption capacity. The UNISAFE can absorb up to 75 times its
own weight. Anhydrous media are
absorbed physically due to the capillary
effect, aqueous media are absorbed
chemically-physically. UNI-SAFE takes
over the weight of the liquid, thus
forming an effective dam against
further spreading of the pollutants.
The green colour of UNI-SAFE acts as
indicator. When in contact with acids
the UNI-SAFE turns yellow and in
case of contact with lye or alkaline
substances it turns dark green to blue.
5 kg in bucket
...................................................62170
BioVersal FW*
The highly effective liquid compound
for ecological removal of oil marks.
Cleans intensively and activates the
biological self-cleaning properties of
nature. For use in accidents with e.g.
mineral oils, Diesel, heating oil, petrol,
kerosene, hydraulic oil as well as rapeseed oil. Encases mineral oil based
products and converts them into a
modification that is easily biologically
decomposed, maintaining the floating
ability. BioVersal reduces the potential
risks typical at this kind of averages
and activates a quick biological
decomposition of the hazardous
material at the site of the accident.
BioVersal is pH neutral, is easily decomposed, in the concentration
WGK 0, not poisonous, dermatologically harmless. The concentrate is
diluted with water (BSG 9 or bucket
pump approx. 0.4 l BioVersal FW/
10 l water, high pressure application
approx. 0.5 l BioVersal/100 l water)
and used as required.
Approved by MPA NRW
no. 220320897.
Can, 25 l
...................................................62165
BioVersal package*
Consisting of: BioVersal in 25 l can,
art.no. 62165 and BioVersal BSG 9,
art.no. 62166
...................................................62167
Ekosorb ”S” oil binding fleece
EKOSORB ”S” is a fleece oil binding
material made of polypropylene micro
fibres with a binding capacity of up to
25 times its own weight. Effective
oleophile properties with regard to
hydrocarbons and derivates such as
petrol, Diesel, toluene, benzenes,
methanols etc. Immediate and quick
absorption through the micro fibres
(blotting paper effect). Due to its oleophile and hydrophobic properties
EKOSORB ”S” is floating even in fully
saturated condition. Disposal cost
savings of up to 50%. Burning without
causing toxic gases, minimum burning
residues.
Certified by the German MPA and the
French CEDRE.
Produced in compliance with the valid
standard AFNOR NFT 90-360.
63656
62166
Bag of chalk*
25 kg, in plastic bag
...................................................62124
”Öl-Ex” cube, type I and II SF,
length of side 5 cm*
for petrol and oil separators, filter and
cleaning units, large water surfaces, at
high flow rates and strong water
turbulences. Long-duration use, dustfree, easy to remove.
Weight: 10 kg per PE bag
...................................................62162
* = not illustrated
09
BioVersal BSG 9
Refillable spray unit (empty):
Volume:
9 l, mixture 25:1
Nitrogen or
Propellant:
compressed air
Working pressure:
max. 15 bar
Spraying time: approx. 5 - 6 min
Width of spray: max. 3 - 5 m
Sufficient for: max. 20 m2 surface
max. 100 m oil marks
Temperature: at least +1ºC
Dim. (WxHxD): 270x580x195 mm,
Ø 185 mm
Weight:
14.1 kg
...................................................62166
Some articles may not be available in
specific countries. Details on request.
Ekosorb ”S” hoses
for removal of oil spills in brooks,
lakes, canals and harbour basins.
The hoses of 3 or 5 m length are
connected by means of eyelets and
carbines. An overlapping of approx.
30 cm guarantees the tightness of the
barrier. The nettings are UV stabilized
which increases the constancy of the
product in operation.
Ekosorb ”S” hose ES 810 B
Absorbing capacity: approx. 165 l.
Dim. (ØxL): 200 mm x 3 m
Weight: 4.25 kg
...................................................63656
37
32663-k009-038
21.04.2005
11:22 Uhr
Seite 38
OIL BINDING AGENTS
OIL BARRIERS
Ekosorb ”S” hose ES 816 B*
Absorbing capacity: approx. 270 l.
Dim. (ØxL): 200 mm x 5 m
Weight: 6.5 kg
...................................................63643
63664
Ekosorb ”S” hose ES 510*
Absorbing capacity: approx. 63 l.
Dim. (ØxL): 130 mm x 3 m
Weight: 2.5 kg
...................................................63657
Ekosorb ”S” hose ES 516-2*
Absorbing capacity: approx. 100 l.
Dim. (ØxL): 30 mm x 5 m
Weight: 4 kg
...................................................63642
Ekosorb ”S” double hose ES 5510*
Absorbing capacity: approx. 125 l.
Dim. (ØxL): 20 x 130 mm x 3 m
Weight: 5 kg
...................................................63658
Ekosorb ”S” mats
are used on small surfaces or on
surfaces that are difficult to reach.
Two types with different weight per
unit area are available, corresponding
to the amount of polluted substances
to be recovered.
09
Ekosorb ”S” mats ES 200*
Packing unit at 200 pcs.
Weight per unit area: 200 g/m2.
Absorbing capacity: approx. 240 l.
Dim. (LxW): 480x430 mm
Weight: 8.5 kg/unit
...................................................63659
EKOSORB ”S” roll ES 150-2*
Weight per unit area: 375 g/m2.
Absorbing capacity: approx. 237 l.
Dim. (LxW): 44 m x 480 mm
Weight: 8 kg
...................................................63666
Ekosorb ”S” rolls
Can be used on the ground, on the
shore or in water to protect and clean
a large area. The rolled material can
easily be cut to the required lengths.
Ekosorb ”S” roll ES 250*
Weight per unit area: 200 g/m2.
Absorbing capacity: approx. 469 l.
Dim. (LxW): 87 m x 960 mm
Weight: 17 kg
...................................................63663
Ekosorb ”S” roll ES 250-2
Weight per unit area: 200 g/m2.
Absorbing capacity: approx. 235 l.
Dim. (LxW): 87 m x 480 mm
Weight: 8.5 kg
...................................................63664
Ekosorb ”S” mats ES 100*
Packing unit at 100 pcs.
Weight per unit area: 375 g/m2.
Absorbing capacity: approx. 240 l.
Dim. (LxW): 480x430 mm
Weight: 8 kg/unit
...................................................63645
Oil barriers and accessories
Oil barrier 350 WDF ”OPTIMAL”
is a flexible solid oil barrier, which can
be coiled and stored on all common oil
barrier reels. Buoyancy and inherent
stability by means of robust plastic
floats and flexible compensation
pieces. The oil and waterproof outside
skin consists of a plastic coated carrier
fabric with high resistance to tear. Oil
and water protected valves ensure
optimum airing. Welded carrying
handles facilitate the transport, make it
easy to place the barrier on the water
and make it possible to fix other
devices (buoys, skimmers etc.) to the
barrier. Due to the small immersion
depth (120 mm) the barrier is particularly suitable for use on shallow and
quick-flowing waters. A comprehensive system of accessories guarantees
optimum efficiency in the most various
of operations (adjustment pieces for
shore and water level, various end
pieces, adapters for other barrier
systems etc.).
Material: Plastic coated polyester
carrier fabric, 900 g/m2
Buoying medium: PS 15/PU Ø 200 mm
Ballast weights: Lead anodes,
DIN 1719
Immersion depth: approx. 170 mm
Float:
Ø 200x250 mm
Coupling system: Aluminium hinge
coupling rail
350 mm
Height:
Weight:
5 kg/m
Ekosorb ”S” veil
To be used when small amounts of oil
or oil films are to be removed from the
water surface. The veil is fixed by
means of a rope, by which it also can
be pulled.
350 WDF, 5 m long*...................62200
350 WDF, 10 m long ..................62201
(illustrated on page 39)
Ekosorb ”S” veil SH 1900*
Absorbing capacity: approx. 195 l.
Dim. (LxW): 30 m x 480 mm
Weight: 6.5 kg
...................................................63644
38
EKOSORB ”S” roll ES 150*
Weight per unit area: 375 g/m2.
Absorbing capacity: approx. 473 l.
Dim. (LxW): 44 m x 960 mm
Weight: 16 kg
...................................................63665
Some articles may not be available in
specific countries. Details on request.
* not illustrated
32663-k009-039
21.04.2005
11:22 Uhr
Seite 39
OIL BARRIERS AND ACCESSORIES
62201
62220
62226
Accessories for oil barrier 350 WDF:
Hinge coupling rail*
...................................................62202
Shore fixing tail piece , single
...................................................62203
Shore fixing tail piece, double
...................................................62204
Shore fixing tail piece, single
with mitre
...................................................62205
Shore fixing tail piece, double
with mitre
...................................................62206
Shore protection 2-way piece
...................................................62207
62206
62205
62207
62204
62203
Oil barrier 250 WDF ”OPTIMAL”*
As 350 WDF above with regard to
material and construction, but:
Buoying medium: PS 15/PU Ø 150 mm
Immersion depth: approx. 120 mm
Float:
Ø 150x250 mm
Height:
250 mm
Weight:
4 kg/m
* = not illustrated
250 WDF, 5 m long
...................................................62208
250 WDF, 10 m long
...................................................62209
Accessories for oil barrier 250 WDF:
Hinge coupling rail*
...................................................62210
Shore fixing tail piece, single*
...................................................62211
Shore fixing tail piece, double*
...................................................62212
Shore fixing tail piece, single*
with mitre
...................................................62213
Accessories for brook oil barrier
Flat coupling rail*
...................................................62221
Shore fixing tail piece, single
...................................................62222
Shore fixing tail piece, double
...................................................62223
Shore fixing tail piece, single*
with mitre
...................................................62224
Shore fixing tail piece, double*
with mitre
...................................................62225
Shore protection 2-way piece
...................................................62226
Shore fixing tail piece, double*
with mitre
...................................................62214
Carrying bag*
for 10 m brook oil barrier
...................................................62227
Shore protection 2-way piece*
...................................................62215
Carrying bag*
for 20 m brook oil barrier
...................................................62228
Brook oil barrier ”OPTIMAL”
As 350 WDF above with regard to
material and construction, but:
Buoying medium: PS 15/PU
Ø 150 mm,
1000 mm long
Immersion depth: approx. 100 mm
Float:
Ø 100x1000 mm
Coupling system: Belt/clamp
aluminium quickcoupling
Height:
200 mm
Weight:
2.5 kg/m
62226
62222
62223
5 m long.....................................62220
Some articles may not be available in
specific countries. Details on request.
39
09
32663-k009-040
21.04.2005
11:21 Uhr
Seite 40
EQUIPMENT FOR OIL BARRIERS
EMERGENCY CONTAINERS
OIL EQUIPMENT
Further equipment for use with oil
barriers
Floating rope of PP*
(Set of 2 pcs.). On one end with
spliced eye for shore fixing.
Dim. (ØxL): 14 mm x 15 m
Weight: 2 kg
...................................................62230
Floating rope of PP*
(Set of 2 pcs.). On one end with
spliced eye for shore fixing.
Dim. (ØxL): 14 mm x 100 m
Weight: 14 kg
...................................................62231
Towing device*
for pulling and towing the oil barrier
WDF 350 and WDF 250 with one highrigid shackle 1.5 t and 15 m of floating
rope
...................................................62232
Tarpaulin, resistant to chemicals*
TPE B III, for 50 m3 emergency
container (weight per unit area
1300 g/m2)
...................................................62236
Tarpaulin, resistant to chemicals*
Tetrafluoroethylene, for 50 m3
emergency container (weight per unit
area 1300 g/m2)
...................................................62237
Further containers of different sizes
and materials on request.
31281
31282
Oil barrier trailers with reels for
100 m or 200 m of oil barrier with
accessories on request.
09
Mobile 50 m3 emergency container
Consisting of a corrosion resistant outside wall and an inside covering, PVCcoated on both sides (weight per unit
area 900 g/m2) with accessories.
Scope of supply:
15 cover segments 1500x1500x4 mm
7 tensioning belts with bag
2 fill and drain pipes with adapters
Storz A-B, B-C
1 ladder
1 inside covering with bag
1 repair set
1 loading container.
Dim. erected (ØxH): 7200x1750 mm
...................................................62235
46210
Suction equipment, resistant to
mineral oils
Suction pipe, size C
for suction from oil puddles. Plastic
coated copper alloy pipe. With foot
valve and adjustable pistol grip for
valve control. With pipe elbow and
size C coupling with suction sealing
ring resistant to mineral oils.
Length: 1100 mm
Weight: 3.5 kg
...................................................46210
Suction hoses, resistant to mineral
oils and electrically conductive
Black rubber hose, 5 mm strong.
Covered inside spiral and copper
strands in the hose wall connected
to the brass couplings.
Size C suction hose, 52 mm i.d.,
1.6 m long
On both ends with size C couplings
of brass with grounding clamps.
Weight: 4.5 kg
...................................................31282
Size C suction hose, 38 mm i.d.,
1.5 m long
On one end with size C brass coupling
with grounding clamps, on the other
end with a brass serrated suction
piece. Suitable for suction out of
mineral oil tanks with small openings.
The suction piece allows an almost
complete draining, as a flow from all
sides is possible when it stands on the
bottom of the tank.
Weight: 9.2 kg
...................................................31281
Size C suction hose, 38 mm i.d.,
6 m long*
On both ends with size C brass
couplings with grounding clamps.
Particularly suitable for use with size C
suction pipe, art.no. 46210.
Weight: 8.4 kg
...................................................31284
Size D suction hose, 25 mm i.d.,
5 m long*
4.5 mm strong. On one end with size D
brass coupling with 1 brass adapter
C/D and 1 grounding clamp. One end
without coupling. Suitable for suction
out of heating oil tanks with small
openings
...................................................31287
62235
40
Some articles may not be available in
specific countries. Details on request.
* = not illustrated
32663-k009-041
21.04.2005
11:28 Uhr
Seite 41
MINERAL OIL ABSORPTION EQUIPMENT
FITTINGS RESISTANT TO MINERAL OILS
Suction strainer size C
DIN 14362, NW 40, with non-return
valve, coupling with mineral oil
resistant sealing, all brass.
Weight: 2.2 kg
...................................................42307
46216
42444
42913
44915
Spare bearing bracket
Adjustable, for pushing onto the spit,
with clamping screw
...................................................46218
42307
46218
46217
61251
Shovel-shaped mineral oil aspirator
Aluminium, with double bottom,
straight cutting edge in front, sloping
sides with two bores for inserting the
axis, bottom inlet with sieve and round
thread for attaching the size C suction
pipe, AWG, art.no. 46210.
A device for absorbing floating oil on
standing or flowing waters. The suction shovel with attached suction pipe
swims like a flat dish on the water.
Sufficient buoyancy due to the double
bottom. The bottom inlet is below the
water surface. By lifting and lowering
the suction pipe the shovel cutting
edge separates a thick or thin layer of
floating oil from the water surface. The
oil runs along the inside front side of
the shovel down to the bottom inlet. It
is absorbed by the suction pipe and
conveyed to the collecting container.
When used on standing waters the
shovel is lead over the oil covered
surface. When used in flowing water
the device can be fixed with 2 spits
with adjustable bearing brackets. It
is recommended to fix the unit in an
angle between oil barrier and shore.
Suction pipe, art.no. 46210, is required
when using the shovel.
Supplied with 2 adjustable bearing
brackets.
Dim.: Cutting edge 100 cm wide,
bottom inlet 30 cm,
height up to the round thread 46.5 cm
Weight: 4.5 kg
...................................................46216
Spare sieve
for inserting in front of the bottom inlet
of the suction shovel, aluminium perforated plate
...................................................46217
Spit for driving into the ground
Galvanized round steel.
Dim. (LxØ): 1120x12 mm
Weight: 1 kg
...................................................61251
42271
42912
Sealing ring piece TW 1502
Brass, with mineral oil resistant
sealing, with clamping ring and lever
as well as size C brass coupling, with
mineral oil resistant suction sealing
ring. Suitable for road tank trucks up
to 6000 l with standard couplings.
Weight: 1.3 kg
...................................................42913
Curved piece TW 1501
Brass, with mineral oil resistant
sealing, with size C brass coupling,
with mineral oil resistant suction
sealing ring. Suitable for road tank
trucks up to 6000 l with standard
couplings.
Weight: 0.9 kg
...................................................42912
42907
32636
Unika tank wagon drain coupling
Draining elbow of pressurized light
metal alloy, clamping jaw, clamps and
tommy screws of steel. For male
thread of 80 to 140 mm. Adjustable by
means of two spindles, thus suitable
for all rail tank wagons, also with
foreign thread. Brass reducing piece,
brass size C coupling and mineral oil
resistant suction sealing ring.
Weight: 7 kg
...................................................42907
Brass suction piece
serrated, for size C suction hose,
38 mm i.d.
...................................................32636
Elbow 90º
Brass, on both sides with size C
coupling with mineral oil resistant
sealing ring.
Weight: 1.7 kg
...................................................42271
Coupling wrench B/C
Please see page 6, art.no. 44915
Quick-action shut-off PN 16
Size C, opening NW 30,
on both sides with coupling
Brass
Weight: 3.1 kg
...................................................42444
Light metal alloy*
Weight: 1.3 kg
...................................................42441
Universal barrel wrench
Please see page 6, art.no. 63919
* = not illustrated
Some articles may not be available in
specific countries. Details on request.
41
09
32663-k009-042
21.04.2005
11:27 Uhr
Seite 42
MINERAL OIL HOSES/ARMATURES/PUMPS
MINERAL OIL RESISTANT DELIVERY EQUIPMENT
Curved piece TW 501*
Brass, with mineral oil resistant
sealing, with brass reducing piece,
with size C brass coupling, with
mineral oil resistant suction sealing
ring. Suitable for all road tank trucks
over 6000 l with standard coupling.
Weight: 1.5 kg
...................................................42909
Sealing ring piece TW 502*
Brass, with mineral oil resistant
sealing, with clamping ring and lever
as well as reducing piece and size C
brass coupling, with mineral oil
resistant suction sealing ring. Suitable
for all road tank trucks over 6000 l
with standard coupling.
Weight: 2.7 kg
...................................................42911
31112
09
Mineral oil delivery hose Pipeline
Resistant to mineral oils and chemicals, electrically conductive. Made of
branded polyester, endless woven,
twill weave. Warp double twisted, filler
yarn multi-twisted, with copper
strands. With synthetic inside lining of
Perbunan N, electrically conductive
and black synthetic outside coating
with high resistance to abrasion.
On both ends with brass couplings
with mineral oil resistant sealing ring
and grounding clamp.
42801
46211
Safety oil draining pipe, size C
for safe (laminar) draining of easily
inflammable liquids through substantial elimination of the energy of
flow. Plastic-jacketed pipe of copper
alloy, at the top with elbow and size C
coupling DIN 14307, at the bottom
with sieve cylinder and convex screwoff plate. Smooth draining of liquids
without vorticity.
Length: 1070 mm
Weight: 3.5 kg
...................................................46211
Size C draining pipe with ball valve
Brass, consisting of ball valve NW 30
ND 16, completely of brass, with size
C coupling with oil resistant pressure
and sealing rings. Outlet 1 1/4” female
thread, with screwed on cylinder rod
...................................................42801
Pump
performance:
Plug:
Light socket:
Carrying frame:
320 l/min at 1.5 bar
and 1.5 m geod.
suction height
EEx de II CT6,
400 V, 16 A
EEx de CT6,
230 V
Steel frame with
removable handles
with cold protection
Suction/delivery
Size C Storz
connection:
coupling
Dim. (LxWxH):
620x390x460 mm
Weight:
52 kg
...................................................63848
21002
TUP 3-1.5
Mineral oil transfer pump TUP 3-1.5,
DIN 14424, portable, with exprotected three-phase motor. Light
socket EEx de II CT6, 230 V, 16 A,
3 P, for connection of our ex-proof
cable lamp, art.no. 58119.
63848
Size C, 52 mm i.d., 15 m long
...................................................31112
Mineral oil transfer pump,
manually operated
Manual diaphragm pump made of
stainless steel. The ideal pump for
small oil accidents, light, compact and
independent of any energy source.
By means of a diaphragm thin and
semi-liquid media, even with foreign
particles, can be transferred without
large energy consumption. With size C
coupling on suction and delivery side.
Size C, 42 mm i.d., 15 m long*
...................................................31111
42
The portable self-priming TUP is
suitable for use with mineral oil
products and other non-aggressive
liquids with a viscosity of <1.5cm2/sec.
It is provided with an ex-proof motor
400 V/2.5 kW and can be used for
flammable liquids of explosion group II
and temperature class T1-T3 in zone 1
and 2 (explosion endanged areas).
The rugged construction makes the
pump safe to run dry, resistant to dirty
water, lightweight and completely
maintenance-free. Due to the excellent
suction capacity the pump can be
used for aspiration of water-air
mixtures.
Some articles may not be available in
specific countries. Details on request.
* = not illustrated
32663-k009-043
21.04.2005
11:27 Uhr
Seite 43
MINERAL OIL TRANSFER PUMPS
SKIMMERS
OIL SEPARATORS
With removable pump lever.
With wheeled gear for easy transport.
Performance: 100 to 200 l/min
Performance per stroke: 4 l
Total delivery height: 6 m WS
Suction height: 5 m.
Dim. (LxWxH): 990x520x200 mm
Weight: 10.3 kg with wheeled gear
...................................................21002
Plastic can 5 l*
with pourer, for filling of the pump
housing of the mineral oil transfer
pumps.
Weight: 0.8 kg
...................................................56888
63383
Oil skimmer OELA III
for absorption of mineral oils from
the water surface. Floating type with
4 floats, removable for transport, and
a lower placed collecting container
with size C suction connection.
Self-aspirating, e.g. the collecting
container cannot be completely
emptied and must not be submerged
before use.
With 10 m of floating hose Ø 2”, on
both ends with size C coupling.
Performance: 100 - 400 l/min.
Dimensions:
- operational 975x975x410 mm
diagonal 1300 mm
- transport:
720x665x390 mm
diagonal 840 mm
Weight:
43 kg
...................................................63383
Special suction skimmer*
for absorption of mineral oils from
water surfaces with individually
trimmable floats. Suitable for small
water surfaces, wells, sewers as well
as calm large water surfaces.
The special suction skimmer is made
of GRP and the floats of polyurethane
foam. For absorbing the oil/water
mixture a 1 1/2” connection with DN
50 threaded connection is provided.
Performance:
100 - 300 l/min
Water depth:
240 mm
Dim. (LxWxH):
440x440x350 mm
Weight:
7.5 kg
...................................................63382
AQUAPROTECTOR type I
Patented universal light liquid separator ”System H” for mobile short-time
use.
The AQUAPROTECTOR is approved
according to DIN 1999-3, by the LGA
Würzburg as stationary apparatus
(LGA certificate 185/86).
The AQUAPROTECTOR is supplied in
a transport container which in operation is used as a receptacle with
removable partition and removable
flow smoothing pack.
The AQUAPROTECTOR is used with
coalescence aid packs (polypropylene
filling material). It is fitted with a size
DN 50 cone-type connection as inlet
and each one size DN 50 thread
connection as outlet for oil and water.
The AQUAPROTECTOR and the
transport container are fitted with
adjustable feet as well as with a spirit
level for leveling purposes.
Material: Stainless steel 1.431 pickled.
Nominal performance:
Oil/water mixture 100 - 150 l/min,
corresponds to stage I of ELRO-pump,
DIN 14427.
Transport dimensions (LxWxH):
800x600x700 mm
Weight: 120 kg
...................................................65200
Mobile oil separator
”AQUAPROTECTOR III”
according to the patented system ”H”
in modified version with continuous oil
delivery (double-acting oil delivery
bell), mounted on single axle trailer.
System
The mobile unit is a separator for
liquids of low viscosity with automatic
oil delivery and designed in compliance with DIN 1999-1. The unit is
used for the recovery and separation
of mineral oil and similar media heavy polluted and harmful to the
environment - from the groundwater
surface or from standing and flowing
waters as well as from wells, where a
quick treatment is necessary to prevent further damages. The complete
unit is mounted on a single axle
chassis equipped in compliance with
the German road regulations and
designed in compliance with DIN
14503. The trailer has a single axle
with torsion bar spring, and is provided
with a towing unit adjustable in height
and overrunning brake with automatic
backing system (power-assisted). The
rugged supporting wheel and the four
infinitely adjustable supporting struts
ensure a safe handling and good
stability even under rough conditions.
65200
* = not illustrated
Some articles may not be available in
specific countries. Details on request.
43
09
32663-k009-044
21.04.2005
11:27 Uhr
Seite 44
OIL SEPARATORS
WATER/MINERAL OIL COLLECTING CONTAINERS
AND ACCESSORIES
Technical data - separator
Contents (when
ready for use): 2300 l
Material:
Stainless steel
1.4301
Inlet:
R 3”, male thread
R 4”, male thread
Outlet:
Oil outlet:
R 2”
Draining:
R 2”
Model:
NG 15, DIN 1999
Dim. (LxWxH): 2700x900x1250 mm
Performance - efficiency:
Model: Corresponds to separator
NG 15, DIN 1999,
approv.no. PA II 3132 + 4062;
Efficiency: According to test certificate
253/86 NG 10 at 10 l/sec. = 1.7 mg/l,
NG 20 at 20 l/sec. = 1.6 mg/l
Techn. data - single axle trailer:
Lights:
Acc. to German road
regulations 12 V, incl.
reversing and fog lamp
plug 13-pole
185 R 14 C
Tyres:
Permissible top speed: 80 km/h
G.V.W.:
1600 kg
Effective total weight: 1100 kg
Empty weight:
850 kg
Set of coalescence cassettes
Consisting of 2 sieve cassettes filled
with heavy-duty filling material of
model R 1”.
Techn. data:
Material of cassette:
09
Stainless steel
1.4301
Type of filling material: PP
Coalescence effective
surface:
180 m2/m3
Free flow section:
92%
Dim. per cassette (LxWxH):
900x450x680 mm
...................................................65204
Water containers
PES fabric, PVC-coating on both
sides, weight of fabric 600 g/m2,
warp tensile strength 280 kp,
filling yarn 200 kp.
Seam at the top for inserting the
bracing pipes.
56983
Water container, 1600 l*
Dim. (bottom area x height):
1400x1400x800 mm
Weight: 7.5 kg
...................................................56924
Water container 3000 l*
Dim. (bottom area x height):
1800x1800x1050 mm
Weight: 8.5 kg
...................................................56925
Bracing of galvanized steel pipes
Consisting of 4 identical bracing pipes
and 4 identical feet, at the top with
welded pipe angle at the bottom with
convex plate
for container, 1600 l
Weight: 11.5 kg
...................................................56971
for container, 3000 l
Weight: 20 kg
...................................................56972
Packing bag*
PVC-coated perlon fabric, for water
and mineral oil collecting containers
for container, 1600 l
Weight: 0.3 kg
...................................................55242
for container, 3000 l
Weight: 0.7 kg
...................................................55210
Inlet elbow
Galvanized, with leather strap for fixing
the hose line to the bracing frame
with size C coupling
Weight: 1.1 kg
...................................................56983
with size B coupling
Weight: 2.1 kg
...................................................56981
Foldable containers made of
chemical fibre fabric
with perbunan N (nitrile rubber)
coating on both sides, resistant to
mineral oils of class A1 (except for
pure benzene), A2 and A3.
Continuous and full resistance/tightness without essential changes in the
material for 100 hours due to the
plated coat of perbunan N and the
homogeneous connection of the webs
by means of hot vulcanization. The
resistance and tightness to pure
benzene is 24 hours.
Weight of fabric 1000 g/m2,
tensile strength of warp and filling yarn
3000 N.
3000 l folding container - open*
At the top with seam and reinforced
corners for inserting the bracing frame.
Incl. marked packing bag.
Bottom area: 2000x2000 mm
Height:
900 mm
Top opening: 1700x1700 mm
Weight:
15 kg
...................................................65099
65204
44
56981
Some articles may not be available in
specific countries. Details on request.
* = not illustrated
32663-k009-045
21.04.2005
11:26 Uhr
Seite 45
EQUIPMENT FOR
COLLECTING AND STORING
3000 l foldable container - open*
As art.no. 65099, but on one side with
flange with threaded connection DN 50
with blank cap with chain, incl. stainless steel screws and Viton sealings.
With marked packing bag.
Weight: 16 kg
...................................................65115
Bracing frame*
Stainless steel for foldable containers
art.nos. 65099 and 65115
...................................................65100
56956
56973
1000 l foldable container*
Weight: 20 kg
...................................................65102
Rubber cord with snap closure*
for PE tarpaulin
...................................................98956
Responder bag for 3000 l foldable
container*
Made of Kappler’s patented multi-layer
film foil material with very high
resistance to chemicals.
Bottom area: 2080x2080 mm
Height: 1300 mm
...................................................65029
Tarpaulin*
Perbunan, with reinforced edge and
eyelets, with inserted perlon rope of
Ø 5 mm. In packing bag.
Dim. (LxW): 4x4 m
Weight: 25 kg
...................................................65095
Responder tarpaulin*
Made of Kappler’s patented multi-layer
film foil material with very high
resistance to chemicals.
Every 50 cm an eyelet of Ø 12 mm
Collecting containers - open
TREVIRA® high tensile fabric, PVCcoated on both sides. Absolutely
resistant to mineral oils and many
chemicals. Welded webs.
Tensile strength: 3000 N/5 cm
Weight of fabric: 1100 g/m2
Dim. (LxW): 4200x3850 mm
Weight: 2.2 kg
...................................................65026
Dim. (LxW): 6000x6000 mm
Weight: 4.7 kg
...................................................65027
98952
3000 l foldable container - open*
Self-erecting, at the top with foam
filled floating bulge. With marked
packing bag.
Weight: 9 kg
...................................................65119
Foldable containers - closed
On the opposite short sides with
flange with threaded connection
DN 50 with blank cap and chain,
incl. stainless steel screws. At the
top with shut-off venting valve.
Incl. marked packing bag.
3000 l foldable container*
Weight: 25 kg
...................................................65114
* = not illustrated
1500 l container - self-erecting*
Dim. (ØxH): 1700x900 mm
Weight: 13 kg
...................................................56920
Packing bag for art.no. 56920*
...................................................55244
3000 l foldable container for
mineral oils - open
Seam for inserting the bracing frame,
art.no. 56973.
Dim. (bottom area x height):
1800x1800x900 mm
Weight: 16 kg
...................................................56956
Bracing frame
Brass pipes, for foldable container,
art.no. 56956.
Weight: 13 kg
...................................................56973
Collecting containers - self-erecting
by means of foam filled floating bulge
3000 l container - self-erecting*
Dim. (ØxH): 2250x1000 mm
Weight: 25 kg
...................................................56919
Packing bag for art.no. 56919*
...................................................55245
Plastic foil
Polyethylene, 0.2 mm strong, for
collecting of liquids, temporary storage
of oil soaked soil, protecting furnitures
from water damages etc.
Dim. of roll (LxW): 25x4 m,
folded width 1 m
...................................................98952
Tarpaulin*
PE, 0.2 mm strong, with cord.
Dim. (LxW): 4x4 m
Weight: 2 kg
...................................................65101
Tarpaulin*
PE, 0.2 mm strong.
Dim. (LxW): 3x3 m
Weight: 1.7 kg
...................................................98955
Some articles may not be available in
specific countries. Details on request.
Collecting containers - closed
with each one size C coupling with
size C blank cap on the front side
and at the top as fill, drain and vent
opening. With extra protection around
the armatures. It is advisable to
connect a shut-off valve on the front
side.
Option: Container with manhole cover
for inside cleaning and inspection.
1500 l container - closed*
Dim. filled (LxWxH):
2450x1500x800 mm
Weight: 14 kg
...................................................56929
Packing bag for art.no. 56929*
...................................................55246
45
09
32663-k009-046
21.04.2005
11:26 Uhr
Seite 46
EQUIPMENT FOR COLLECTION AND STORING
LARGE-VOLUME COLLECTING CONTAINERS
3000 l container - closed*
Dim. filled (LxWxH):
2450x2450x800 mm
Weight: 25 kg
...................................................56928
Packing bag for art.no. 56928*
...................................................55247
5000 l container - closed*
Dim. filled (LxWxH):
2450x3400x900 mm
Weight: 35 kg
...................................................56927
Packing bag for art.no. 56927*
...................................................55248
Manhole cover*
Aluminium, for upper side of container
with size C coupling and size C blank
cap of brass
...................................................56940
09
5000 l container - self-erecting
Dim. (ØxH): 2750x1000 mm
Weight: 23 kg
...................................................56930
10000 l container - self-erecting*
Dim. (ØxH): 3700x1000 mm
Weight: 33 kg
...................................................56931
15000 l container - self-erecting*
Dim. (ØxH): 4750x1000 mm
Weight: 45 kg
...................................................56932
35000 l container - self-erecting*
Dim. (ØxH): 6750x1000 mm
Weight: 80 kg
...................................................56933
56944
Large-volume collecting containers
made of TREVIRA® high tensile
fabric, ALCRYN-coated on both
sides
with high-frequency welded webs.
ALCRYN is a thermoplastic polymer
with increased resistance to chemicals
and oils.
Tensile strength: 3000 N/5 cm
Weight of material: 1300 g/m2
Collecting containers - self-erecting
by means of foam filled floating bulge
Ø 100 mm, with a fill and drain
connection NW 75 of stainless steel
1.4301 with size B coupling and blank
cap with ball valve of stainless steel
1.4301. Incl. packing bag.
5000 l container - self-erecting*
Dim. (ØxH): 2750x1000 mm
Weight: 29 kg
...................................................56934
Shut-off valve*
Gunmetal, on both sides with size C
coupling of brass
...................................................41683
10000 l container - self-erecting*
Dim. (ØxH): 3700x1000 mm
Weight: 42 kg
...................................................56935
Large-volume collecting containers
made of TREVIRA® high tensile
fabric, PVC-coated on both sides
Resistant to mineral oil, limited
resistance to chemicals. The webs
are high-frequency welded.
Tensile strength: 4500 N/5 cm
Weight of material: 1100 g/m2
15000 l container - self-erecting*
Dim. (ØxH): 4750x1000 mm
Weight: 57 kg
...................................................56936
56930
Collecting containers - closed
with two size B couplings, on one side
with blank cap, on the other side with
aluminium anodized ball valve,
1 venting valve 3/4” as well as
4 heavy-duty loops at the container
corners. Incl. packing bag.
20000 l container - closed
Dim. (WxHxD):
5100x3600x1200 mm
Weight: 59 kg
...................................................56944
30000 l container - closed*
Dim. (WxHxD):
5300x4700x1400 mm
Weight: 78 kg
...................................................56945
Collecting containers - self-erecting
by means of foam filled floating bulge
Ø 100 mm, with a fill and drain
connection NW 75, with aluminium
anodized clamping flange, size B
anodized coupling and blank cap,
incl. ball valve and packing bag
50000 l container - closed*
Dim. (WxHxD):
8200x4700x1400 mm
Weight: 114 kg
...................................................56946
46
Some articles may not be available in
specific countries. Details on request.
35000 l container - self-erecting*
Dim. (ØxH): 6750x1000 mm
Weight: 102 kg
...................................................56943
Collecting containers - closed
with two size B couplings of stainless
steel 1.4301, on one side with blank
cap, on the other side with ball valve
of stainless steel 1.4301,
1 vent valve 3/4” as well as
4 heavy-duty loops at the corners of
the container. Incl. packing bag.
20000 l container - closed*
Dim. (WxHxD):
5100x3700x1200 mm
Weight: 70 kg
...................................................56947
30000 l container - closed*
Dim. (WxHxD):
6000x4900x1200 mm
Weight: 105 kg
...................................................56948
* = not illustrated
32663-k009-047
21.04.2005
11:26 Uhr
Seite 47
FLEXIBLE COLLECTING TUBS
AND EQUIPMENT
50000 l container - closed*
Dim. (WxHxD):
8000x5900x1200 mm
Weight: 161 kg
...................................................56949
ALCRYN liquid collecting tubs
Self-rolling, one-man operation.
Suitable for use in case of leaks in tank
trucks and containers or as decontamination tub etc.
With a surrounding air body of
220 mm Ø, 3/8” compressed air
connection, excess pressure valve
and 3/4” venting connection.
Incl. packing bag.
Material: TREVIRA® high tensile
fabric, ALCRYN-coated on both sides,
with a tensile strength of 3000 N/5 cm,
high-frequency welded.
Weight of material: 1300 g/m2
Collecting tub 2000x3000 mm*
Volume: 1200 l.
Weight: 18.2 kg
...................................................56950
Collecting tub 3000x4000 mm*
Volume: 2400 l.
Weight: 31 kg
...................................................56951
Collecting tub 5000x5000 mm*
Volume: 5000 l.
Weight: 60 kg
...................................................56952
Double-stroke pump*
for filling of the above tubs
...................................................63944
Further sizes on request.
Resistance lists for the materials
mentioned above are available on
request.
Equipment for collecting of
hazardous material
The Federal Institute for Physics and
Technology in Braunschweig has
determined that aluminium cannot be
considered completely non-sparking.
For this reason we now offer common
articles also in stainless steel and
armatures such as quick action shutoff valves and suction stainers are
available in brass.
* = not illustrated
43492
98831
56862
PE tarpaulin
Largely resistant to alkalis, acids and
mineral oils. 0.4 mm strong. With brass
eyelets every 50 cm, 2 eyelets at each
corner.
Dim. (LxW): 4x4 m
Weight: 3.5 kg
...................................................98963
83423
98963
Oil and acid scoop
Glass fibre reinforced polyester, flat,
with handle, suitable for removing very
shallow liquid puddles.
Dim. (LxW): 310x330 mm
Weight: 0.9 kg
...................................................56862
Mineral oil collecting box
Stainless steel, with welded pipe of
600 mm, with size C coupling of brass,
with grounding connection.
Dim. of box (LxWxH):
400x400x200 mm
Total length: 1 m
Weight: 8 kg
...................................................43492
Mineral oil collecting gutter
Soft aluminium, changeable in shape.
Dim. (LxW): 1800x480 mm
Weight: 1.5 kg
...................................................98831
Haz-mat discharge gutter, 4-part*
Glass fibre reinforced polyester,
consisting of 3 gutters each of 1.09 m
and a head piece of 1.13 m. Stackable.
The parts are connected by means of
snap and clamping devices. The gutter
has a bottom width of 37 cm and top
width incl. rim of 58 cm. Height 12 cm.
Dim. of the four parts when stacked
(WxHxD): 1130x580x130 mm
Total weight: 9.5 kg
...................................................98842
Some articles may not be available in
specific countries. Details on request.
Trough
Stainless steel, conical, with two
foldable handles 75x105 mm. For
transport of hazardous material, but
also for heaping of sand, peat litter,
saw dust, oil binders etc.
Dim. (LxWxH): 610x410x180 mm
Weight: 8 kg
...................................................83423
Oil collecting funnel*
Valmex OL-110 fabric with PVCcoating Valmex P 8, resistant to
mineral oils.
Funnel opening 750x750 mm,
height 600 mm,
with attached hose of 5 m, Ø 500 mm.
End of hose with size C coupling. Rim
of funnel strengthened by means of
wire reinforced PVC-cord.
Weight: 3.5 kg
...................................................56939
Funnel*
Stainless steel 18/8, Ø 250 mm.
Weight: 0.5 kg
...................................................84166
47
09
Version: 05/05
Albert Ziegler GmbH & Co. KG • Manufacturers of fire service vehicles, pumps and hoses
Memminger Str. 28 • 89537 Giengen • Germany
Phone +49 7322 951-0 • Fax +49 7322 951-464
WWW: http://www.ziegler.de • E-Mail: [email protected]
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement